René Scharfe [Fri, 6 Aug 2021 17:53:47 +0000 (19:53 +0200)]
object-file: use unsigned arithmetic with bit mask
33f379eee6 (make object_directory.loose_objects_subdir_seen a bitmap,
2021-07-07) replaced a wasteful 256-byte array with a 32-byte array
and bit operations. The mask calculation shifts a literal 1 of type
int left by anything between 0 and 31. UndefinedBehaviorSanitizer
doesn't like that and reports:
object-file.c:2477:18: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Make sure to use an unsigned 1 instead to avoid the issue.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduces a KHASH_INIT invocation with a trailing ';', which while
commonly expected will trigger warnings with pedantic on both
clang[-Wextra-semi] and gcc[-Wpedantic], because that macro has already
a semicolon and is meant to be invoked without one.
while fixing the macro would be a worthy solution (specially considering
this is a common recurring problem), remove the extra ';' for now to
minimize churn.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 7 Jul 2021 23:10:19 +0000 (23:10 +0000)]
oidtree: a crit-bit tree for odb_loose_cache
This saves 8K per `struct object_directory', meaning it saves
around 800MB in my case involving 100K alternates (half or more
of those alternates are unlikely to hold loose objects).
This is implemented in two parts: a generic, allocation-free
`cbtree' and the `oidtree' wrapper on top of it. The latter
provides allocation using alloc_state as a memory pool to
improve locality and reduce free(3) overhead.
Unlike oid-array, the crit-bit tree does not require sorting.
Performance is bound by the key length, for oidtree that is
fixed at sizeof(struct object_id). There's no need to have
256 oidtrees to mitigate the O(n log n) overhead like we did
with oid-array.
Being a prefix trie, it is natively suited for expanding short
object IDs via prefix-limited iteration in
`find_short_object_filename'.
On my busy workstation, p4205 performance seems to be roughly
unchanged (+/-8%). Startup with 100K total alternates with no
loose objects seems around 10-20% faster on a hot cache.
(800MB in memory savings means more memory for the kernel FS
cache).
The generic cbtree implementation does impose some extra
overhead for oidtree in that it uses memcmp(3) on
"struct object_id" so it wastes cycles comparing 12 extra bytes
on SHA-1 repositories. I've not yet explored reducing this
overhead, but I expect there are many places in our code base
where we'd want to investigate this.
More information on crit-bit trees: https://cr.yp.to/critbit.html
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 7 Jul 2021 23:10:17 +0000 (23:10 +0000)]
make object_directory.loose_objects_subdir_seen a bitmap
There's no point in using 8 bits per-directory when 1 bit
will do. This saves us 224 bytes per object directory, which
ends up being 22MB when dealing with 100K alternates.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 7 Jul 2021 23:10:16 +0000 (23:10 +0000)]
avoid strlen via strbuf_addstr in link_alt_odb_entry
We can save a few milliseconds (across 100K odbs) by using
strbuf_addbuf() instead of strbuf_addstr() by passing `entry' as
a strbuf pointer rather than a "const char *".
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 7 Jul 2021 23:10:15 +0000 (23:10 +0000)]
speed up alt_odb_usable() with many alternates
With many alternates, the duplicate check in alt_odb_usable()
wastes many cycles doing repeated fspathcmp() on every existing
alternate. Use a khash to speed up lookups by odb->path.
Since the kh_put_* API uses the supplied key without
duplicating it, we also take advantage of it to replace both
xstrdup() and strbuf_release() in link_alt_odb_entry() with
strbuf_detach() to avoid the allocation and copy.
In a test repository with 50K alternates and each of those 50K
alternates having one alternate each (for a total of 100K total
alternates); this speeds up lookup of a non-existent blob from
over 16 minutes to roughly 2.7 seconds on my busy workstation.
Note: all underlying git object directories were small and
unpacked with only loose objects and no packs. Having to load
packs increases times significantly.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 14 Jun 2021 04:33:29 +0000 (13:33 +0900)]
Merge branch 'ab/test-lib-updates'
Test clean-up.
* ab/test-lib-updates:
test-lib: split up and deprecate test_create_repo()
test-lib: do not show advice about init.defaultBranch under --verbose
test-lib: reformat argument list in test_create_repo()
submodule tests: use symbolic-ref --short to discover branch name
test-lib functions: add --printf option to test_commit
describe tests: convert setup to use test_commit
test-lib functions: add an --annotated option to "test_commit"
test-lib-functions: document test_commit --no-tag
test-lib-functions: reword "test_commit --append" docs
test-lib tests: remove dead GIT_TEST_FRAMEWORK_SELFTEST variable
test-lib: bring $remove_trash out of retirement
Junio C Hamano [Mon, 14 Jun 2021 04:33:27 +0000 (13:33 +0900)]
Merge branch 'so/log-m-implies-p'
The "-m" option in "git log -m" that does not specify which format,
if any, of diff is desired did not have any visible effect; it now
implies some form of diff (by default "--patch") is produced.
* so/log-m-implies-p:
diff-merges: let "-m" imply "-p"
diff-merges: rename "combined_imply_patch" to "merges_imply_patch"
stash list: stop passing "-m" to "git log"
git-svn: stop passing "-m" to "git rev-list"
diff-merges: move specific diff-index "-m" handling to diff-index
t4013: test "git diff-index -m"
t4013: test "git diff-tree -m"
t4013: test "git log -m --stat"
t4013: test "git log -m --raw"
t4013: test that "-m" alone has no effect in "git log"
Junio C Hamano [Mon, 14 Jun 2021 04:33:26 +0000 (13:33 +0900)]
Merge branch 'en/ort-perf-batch-11'
Optimize out repeated rename detection in a sequence of mergy
operations.
* en/ort-perf-batch-11:
merge-ort, diffcore-rename: employ cached renames when possible
merge-ort: handle interactions of caching and rename/rename(1to1) cases
merge-ort: add helper functions for using cached renames
merge-ort: preserve cached renames for the appropriate side
merge-ort: avoid accidental API mis-use
merge-ort: add code to check for whether cached renames can be reused
merge-ort: populate caches of rename detection results
merge-ort: add data structures for in-memory caching of rename detection
t6429: testcases for remembering renames
fast-rebase: write conflict state to working tree, index, and HEAD
fast-rebase: change assert() to BUG()
Documentation/technical: describe remembering renames optimization
t6423: rename file within directory that other side renamed
Junio C Hamano [Mon, 14 Jun 2021 04:33:26 +0000 (13:33 +0900)]
Merge branch 'ga/send-email-sendmail-cmd'
"git send-email" learned the "--sendmail-cmd" command line option
and the "sendemail.sendmailCmd" configuration variable, which is a
more sensible approach than the current way of repurposing the
"smtp-server" that is meant to name the server to instead name the
command to talk to the server.
* ga/send-email-sendmail-cmd:
git-send-email: add option to specify sendmail command
Junio C Hamano [Mon, 14 Jun 2021 04:33:25 +0000 (13:33 +0900)]
Merge branch 'zh/ref-filter-atom-type'
The code to handle the "--format" option in "for-each-ref" and
friends made too many string comparisons on %(atom)s used in the
format string, which has been corrected by converting them into
enum when the format string is parsed.
René Scharfe [Sun, 6 Jun 2021 01:01:57 +0000 (03:01 +0200)]
parallel-checkout: avoid dash local bug in tests
Dash bug https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097
lets the shell erroneously perform field splitting on the expansion of a
command substitution during declaration of a local variable. It causes
the parallel-checkout tests to fail e.g. when running them with
/bin/dash on MacOS 11.4, where they error out like this:
./t2080-parallel-checkout-basics.sh: 33: local: 0: bad variable name
That's because the output of wc -l contains leading spaces and the
returned number of lines is treated as another variable to declare, i.e.
as in "local workers= 0".
Work around it by enclosing the command substitution in quotes.
Helped-by: Matheus Tavares Bernardino <matheus.bernardino@usp.br> Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 4 Jun 2021 01:36:11 +0000 (10:36 +0900)]
fsync(): be prepared to see EINTR
Some platforms, like NonStop do not automatically restart fsync()
when interrupted by a signal, even when that signal is setup with
SA_RESTART.
This can lead to test breakage, e.g., where "--progress" is used,
thus SIGALRM is sent often, and can interrupt an fsync() syscall.
Make sure we deal with such a case by retrying the syscall
ourselves. Luckily, we call fsync() fron a single wrapper,
fsync_or_die(), so the fix is fairly isolated.
Reported-by: Randall S. Becker <randall.becker@nexbridge.ca> Helped-by: Jeff King <peff@peff.net> Helped-by: Taylor Blau <me@ttaylorr.com>
[jc: the above two did most of the work---I just tied the loose end] Helped-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Aguilar [Tue, 1 Jun 2021 20:52:29 +0000 (13:52 -0700)]
contrib/completion: fix zsh completion regression from 59d85a2a05
A recent change to make git-completion.bash use $__git_cmd_idx
in more places broke a number of completions on zsh because it
modified __git_main but did not update __git_zsh_main.
Notably, completions for "add", "branch", "mv" and "push" were
broken as a result of this change.
In addition to the undefined variable usage, "git mv <tab>" also
prints the following error:
__git_count_arguments:7: bad math expression:
operand expected at `"1"'
_git_mv:[:7: unknown condition: -gt
Remove the quotes around $__git_cmd_idx in __git_count_arguments
and set __git_cmd_idx=1 early in __git_zsh_main to fix the
regressions from 59d85a2a05.
This was tested on zsh 5.7.1 (x86_64-apple-darwin19.0).
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: David Aguilar <davvid@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/fsck.c: don't conflate "int" and "enum" in callback
Fix a warning on AIX's xlc compiler that's been emitted since my a1aad71601a (fsck.h: use "enum object_type" instead of "int",
2021-03-28):
"builtin/fsck.c", line 805.32: 1506-068 (W) Operation between
types "int(*)(struct object*,enum object_type,void*,struct
fsck_options*)" and "int(*)(struct object*,int,void*,struct
fsck_options*)" is not allowed.
I.e. it complains about us assigning a function with a prototype "int"
where we're expecting "enum object_type".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places in the code were doing
while ((d = readdir(dir)) != NULL) {
if (is_dot_or_dotdot(d->d_name))
continue;
...process d...
}
Introduce a readdir_skip_dot_and_dotdot() helper to make that a one-liner:
while ((d = readdir_skip_dot_and_dotdot(dir)) != NULL) {
...process d...
}
This helper particularly simplifies checks for empty directories.
Also use this helper in read_cached_dir() so that our statistics are
consistent across platforms. (In other words, read_cached_dir() should
have been using is_dot_or_dotdot() and skipping such entries, but did
not and left it to treat_path() to detect and mark such entries as
path_none.)
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 27 May 2021 04:53:55 +0000 (04:53 +0000)]
dir: update stale description of treat_directory()
The documentation comment for treat_directory() was originally written
in 095952 (Teach directory traversal about subprojects, 2007-04-11)
which was before the 'struct dir_struct' split its bitfield of named
options into a 'flags' enum in 7c4c97c0 (Turn the flags in struct
dir_struct into a single variable, 2009-02-16). When those flags
changed, the comment became stale, since members like
'show_other_directories' transitioned into flags like
DIR_SHOW_OTHER_DIRECTORIES.
Update the comments for treat_directory() to use these flag names rather
than the old member names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 May 2021 03:36:58 +0000 (12:36 +0900)]
Merge branch 'ab/pack-linkage-fix'
"ld" on Solaris fails to link some test helpers, which has been
worked around by reshuffling the inline function definitions from a
header file to a source file that is the only user of them.
* ab/pack-linkage-fix:
pack-objects: move static inline from a header to the sole consumer
pack-objects: move static inline from a header to the sole consumer
Move the code that is only used in builtin/pack-objects.c out of
pack-objects.h.
This fixes an issue where Solaris's SunCC hasn't been able to compile
git since 483fa7f42d9 (t/helper/test-bitmap.c: initial commit,
2021-03-31).
The real origin of that issue is that in 898eba5e630 (pack-objects:
refer to delta objects by index instead of pointer, 2018-04-14)
utility functions only needed by builtin/pack-objects.c were added to
pack-objects.h. Since then the header has been used in a few other
places, but 483fa7f42d9 was the first time it was used by test helper.
Since Solaris is stricter about linking and the oe_get_size_slow()
function lives in builtin/pack-objects.c the build started failing
with:
Undefined first referenced
symbol in file
oe_get_size_slow t/helper/test-bitmap.o
ld: fatal: symbol referencing errors. No output written to t/helper/test-tool
On other platforms this is presumably OK because the compiler and/or
linker detects that the "static inline" functions that reference
oe_get_size_slow() aren't used.
Let's solve this by moving the relevant code from pack-objects.h to
builtin/pack-objects.c. This is almost entirely a code-only move, but
because of the early macro definitions in that file referencing some
of these inline functions we need to move the definition of "static
struct packing_data to_pack" earlier, and declare these inline
functions above the macros.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Wed, 26 May 2021 23:58:56 +0000 (20:58 -0300)]
t2080: fix cp invocation to copy symlinks instead of following them
t2080 makes a few copies of a test repository and later performs a
branch switch on each one of the copies to verify that parallel checkout
and sequential checkout produce the same results. However, the
repository is copied with `cp -R` which, on some systems, defaults to
following symlinks on the directory hierarchy and copying their target
files instead of copying the symlinks themselves. AIX is one example of
system where this happens. Because the symlinks are not preserved, the
copied repositories have paths that do not match what is in the index,
causing git to abort the checkout operation that we want to test. This
makes the test fail on these systems.
Fix this by copying the repository with the POSIX flag '-P', which
forces cp to copy the symlinks instead of following them. Note that we
already use this flag for other cp invocations in our test suite (see
t7001). With this change, t2080 now passes on AIX.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: move "hooks_path" invocation to git-send-email.perl
Move the newly added "hooks_path" API in Git.pm to its only user in
git-send-email.perl. This was added in c8243933c74 (git-send-email:
Respect core.hooksPath setting, 2021-03-23), meaning that it hasn't
yet made it into a non-rc release of git.
The consensus with Git.pm is that we need to be considerate of
out-of-tree users who treat it as a public documented interface. We
should therefore be less willing to add new functionality to it, least
we be stuck supporting it after our own uses for it disappear.
In this case the git-send-email.perl hook invocation will probably be
replaced by a future "git hook run" command, and in the commit
preceding this one the "hooks_path" become nothing but a trivial
wrapper for "rev-parse --git-path hooks" anyway (with no
Cwd::abs_path() call), so let's just inline this command in
git-send-email.perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: don't needlessly abs_path() the core.hooksPath
In c8243933c74 (git-send-email: Respect core.hooksPath setting,
2021-03-23) we started supporting core.hooksPath in "send-email". It's
been reported that on Windows[1] doing this by calling abs_path()
results in different canonicalizations of the absolute path.
This wasn't an issue in c8243933c74 itself, but was revealed by my ea7811b37e0 (git-send-email: improve --validate error output,
2021-04-06) when we started emitting the path to the hook, which was
previously only internal to git-send-email.perl.
The just-landed 53753a37d09 (t9001-send-email.sh: fix expected
absolute paths on Windows, 2021-05-24) narrowly fixed this issue, but
I believe we can do better here. We should not be relying on whatever
changes Perl's abs_path() makes to the path "rev-parse --git-path
hooks" hands to us. Let's instead trust it, and hand it to Perl's
system() in git-send-email.perl. It will handle either a relative or
absolute path.
So let's revert most of 53753a37d09 and just have "hooks_path" return
what we get from "rev-parse" directly without modification. This has
the added benefit of making the error message friendlier in the common
case, we'll no longer print an absolute path for repository-local hook
errors.
Junio C Hamano [Tue, 25 May 2021 20:52:34 +0000 (05:52 +0900)]
t1092: revert the "-1" hack for emulating "no progress meter"
This looked like a good idea, but it seems to break tests on 32-bit
builds rather badly. Revert to just use "100 thousands must be big
enough" for now.
Derrick Stolee [Mon, 24 May 2021 19:55:07 +0000 (19:55 +0000)]
t1092: use GIT_PROGRESS_DELAY for consistent results
The t1092-sparse-checkout-compatibility.sh tests compare the stdout and
stderr for several Git commands across both full checkouts, sparse
checkouts with a full index, and sparse checkouts with a sparse index.
Since these are direct comparisons, sometimes a progress indicator can
flush at unpredictable points, especially on slower machines. This
causes the tests to be flaky.
One standard way to avoid this is to add GIT_PROGRESS_DELAY=0 to the Git
commands that are run, as this will force every progress indicator
created with start_progress_delay() to be created immediately. However,
there are some progress indicators that are created in the case of a
full index that are not created with a sparse index. Moreover, their
values may be different as those indexes have a different number of
entries.
Instead, use GIT_PROGRESS_DELAY=-1 (which will turn into UINT_MAX)
to ensure that any reasonable machine running these tests would
never display delayed progress indicators.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Tue, 25 May 2021 03:41:01 +0000 (00:41 -0300)]
init: fix bug regarding ~/ expansion in init.templateDir
We used to read the init.templateDir setting at builtin/init-db.c using
a git_config() callback that, in turn, called git_config_pathname(). To
simplify the config reading logic at this file and plug a memory leak,
this was replaced by a direct call to git_config_get_value() at e4de4502e6 ("init: remove git_init_db_config() while fixing leaks",
2021-03-14). However, this function doesn't provide path expanding
semantics, like git_config_pathname() does, so paths with '~/' and
'~user/' are treated literally. This makes 'git init' fail to handle
init.templateDir paths using these constructs:
$ git config init.templateDir '~/templates_dir'
$ git init
'warning: templates not found in ~/templates_dir'
Replace the git_config_get_value() call by git_config_get_pathname(),
which does the '~/' and '~user/' expansions. Also add a regression test.
Note that unlike git_config_get_value(), the config cache does not own
the memory for the path returned by git_config_get_pathname(), so we
must free() it.
Reported on IRC by rkta.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression with the "the editor exited uncleanly, aborting
everything" error message going missing after my d21616c0394 (git-send-email: refactor duplicate $? checks into a
function, 2021-04-06).
I introduced a $msg variable, but did not actually use it. This caused
us to miss the optional error message supplied by the "do_edit"
codepath. Fix that, and add tests to check that this works.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 24 May 2021 19:38:09 +0000 (21:38 +0200)]
t9001-send-email.sh: fix expected absolute paths on Windows
Git for Windows is a native Windows program that works with native
absolute paths in the drive letter style C:\dir. The auxiliary
infrastructure is based on MSYS2, which uses POSIX style /C/dir.
When we test for output of absolute paths produced by git.exe, we
usally have to expect C:\dir style paths. To produce such expected
paths, we have to use $(pwd) in the test scripts; the alternative,
$PWD, produces a POSIX style path. ($PWD is a shell variable, and the
shell is bash, an MSYS2 program, and operates in the POSIX realm.)
There are two recently added tests that were written to expect C:\dir
paths. The output that is tested is produced by `git send-email`, but
behind the scenes, this is a Perl script, which also works in the
POSIX realm and produces /C/dir style output.
In the first test case that is changed here, replace $(pwd) by $PWD
so that the expected path is constructed using /C/dir style.
The second test case sets core.hooksPath to an absolute path. Since
the test script talks to native git.exe, it is supposed to place a
C:/dir style path into the configuration; therefore, keep $(pwd).
When this configuration value is consumed by the Perl script, it is
transformed to /C/dir style by the MSYS2 layer and echoed back in
this form in the error message. Hence, do use $PWD for the expected
value.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Fri, 21 May 2021 22:29:40 +0000 (17:29 -0500)]
doc: simplify Makefile using .DELETE_ON_ERROR
Currently GNU make already removes files when catching an interruption
signal, however, in order to deal with other kinds of errors a
workaround is in place to store target output to a temporary file, and
only move it to its right place on success.
By enabling the built-in .DELETE_ON_ERROR we let make do this task, so
we don't have to.
This way the rules can be simplified a lot.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Felipe Contreras [Fri, 21 May 2021 22:29:39 +0000 (17:29 -0500)]
doc: remove unnecessary rm instances
Commits 50cff52f1a (When generating manpages, delete outdated targets
first., 2007-08-02) and f9286765b2 (Documentation/Makefile: remove
cmd-list.made before redirecting to it., 2007-08-06) created these rm
instances for a very rare corner-case: building as root by mistake.
It's odd to have workarounds here, but nowhere else in the Makefile--
which already fails in this stuation, starting from
Documentation/technical/.
We gain nothing but complexity, so let's remove them.
Comments-by: Jeff King <peff@peff.net> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Despite that tar is available everywhere, it's not required by POSIX.
In our build system, users are allowed to specify which tar to be used
in Makefile knobs. Furthermore, GNU tar (gtar) is prefered when autotools
is being used.
In our testsuite, 7 out of 9 tar-required-tests use "$TAR", the other
two use "tar".
Let's change the remaining two tests to "$TAR".
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Fri, 21 May 2021 10:37:47 +0000 (03:37 -0700)]
stash show: use stash.showIncludeUntracked even when diff options given
If options pertaining to how the diff is displayed is provided to
`git stash show`, the command will ignore the stash.showIncludeUntracked
configuration variable, defaulting to not showing any untracked files.
This is unintuitive behaviour since the format of the diff output and
whether or not to display untracked files are orthogonal.
Use stash.showIncludeUntracked even when diff options are given. Of
course, this is still overridable via the command-line options.
Update the documentation to explicitly say which configuration variables
will be overridden when a diff options are given.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
