Glen Choo [Tue, 29 Mar 2022 20:01:16 +0000 (20:01 +0000)]
branch: support more tracking modes when recursing
"git branch --recurse-submodules" does not propagate "--track=inherit"
or "--no-track" to submodules, which causes submodule branches to use
the wrong tracking mode [1]. To fix this, pass the correct options to
the "submodule--helper create-branch" child process and test for it.
While we are refactoring the same code, replace "--track" with the
synonymous, but more consistent-looking "--track=direct" option
(introduced at the same time as "--track=inherit", d3115660b4 (branch:
add flags and config to inherit tracking, 2021-12-20)).
[1] This bug is partially a timing issue: "branch --recurse-submodules"
was introduced around the same time as "--track=inherit", and even
though I rebased "branch --recurse-submodules" on top of that, I had
neglected to support the new tracking mode. Omitting "--no-track"
was just a plain old mistake, though.
Signed-off-by: Glen Choo <chooglen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Sat, 29 Jan 2022 00:04:45 +0000 (16:04 -0800)]
branch: add --recurse-submodules option for branch creation
To improve the submodules UX, we would like to teach Git to handle
branches in submodules. Start this process by teaching "git branch" the
--recurse-submodules option so that "git branch --recurse-submodules
topic" will create the `topic` branch in the superproject and its
submodules.
Although this commit does not introduce breaking changes, it does not
work well with existing --recurse-submodules commands because "git
branch --recurse-submodules" writes to the submodule ref store, but most
commands only consider the superproject gitlink and ignore the submodule
ref store. For example, "git checkout --recurse-submodules" will check
out the commits in the superproject gitlinks (and put the submodules in
detached HEAD) instead of checking out the submodule branches.
Because of this, this commit introduces a new configuration value,
`submodule.propagateBranches`. The plan is for Git commands to
prioritize submodule ref store information over superproject gitlinks if
this value is true. Because "git branch --recurse-submodules" writes to
submodule ref stores, for the sake of clarity, it will not function
unless this configuration value is set.
This commit also includes changes that support working with submodules
from a superproject commit because "branch --recurse-submodules" (and
future commands) need to read .gitmodules and gitlinks from the
superproject commit, but submodules are typically read from the
filesystem's .gitmodules and the index's gitlinks. These changes are:
* add a submodules_of_tree() helper that gives the relevant
information of an in-tree submodule (e.g. path and oid) and
initializes the repository
* add is_tree_submodule_active() by adding a treeish_name parameter to
is_submodule_active()
* add the "submoduleNotUpdated" advice to advise users to update the
submodules in their trees
Incidentally, fix an incorrect usage string that combined the 'list'
usage of git branch (-l) with the 'create' usage; this string has been
incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use
parse_options., 2007-10-07).
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Sat, 29 Jan 2022 00:04:44 +0000 (16:04 -0800)]
builtin/branch: consolidate action-picking logic in cmd_branch()
Consolidate the logic for deciding when to create a new branch in
cmd_branch(), and save the result for reuse. Besides making the function
more explicit, this allows us to validate options that can only be used
when creating a branch. Such an option does not exist yet, but one will
be introduced in a subsequent commit.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Sat, 29 Jan 2022 00:04:43 +0000 (16:04 -0800)]
branch: add a dry_run parameter to create_branch()
Add a dry_run parameter to create_branch() such that dry_run = 1 will
validate a new branch without trying to create it. This will be used in
`git branch --recurse-submodules` to ensure that the new branch can be
created in all submodules.
Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Sat, 29 Jan 2022 00:04:42 +0000 (16:04 -0800)]
branch: make create_branch() always create a branch
With the previous commit, there are no more invocations of
create_branch() that do not create a branch because:
* BRANCH_TRACK_OVERRIDE is no longer passed
* clobber_head_ok = true and force = false is never passed
Assert these situations, delete dead code and ensure that we're handling
clobber_head_ok and force correctly by introducing tests for `git branch
--force`. As a result, create_branch() now always creates a branch.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Sat, 29 Jan 2022 00:04:41 +0000 (16:04 -0800)]
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
This commit is preparation for a future commit that will simplify
create_branch() so that it always creates a branch. This will allow
create_branch() to accept a dry_run parameter (which is needed for "git
branch --recurse-submodules").
create_branch() used to always create a branch, but 4fc5006676 (Add
branch --set-upstream, 2010-01-18) changed it to also be able to set
tracking information without creating a branch.
Refactor the code that sets tracking information into its own functions
dwim_branch_start() and dwim_and_setup_tracking(). Also change an
invocation of create_branch() in cmd_branch() in builtin/branch.c to use
dwim_and_setup_tracking(), since that invocation is only for setting
tracking information (in "git branch --set-upstream-to").
As of this commit, create_branch() is no longer invoked in a way that
does not create branches.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 20 Jan 2022 12:35:54 +0000 (13:35 +0100)]
branch,checkout: fix --track documentation
Document that the accepted variants of the --track option are --track,
--track=direct, and --track=inherit. The equal sign in the latter two
cannot be replaced with whitespace; in general optional arguments need
to be attached firmly to their option.
Put "direct" consistently before "inherit", if only for the reasons
that the former is the default, explained first in the documentation,
and comes before the latter alphabetically.
Mention both modes in the short help so that readers don't have to look
them up in the full documentation. They are literal strings and thus
untranslatable. PARSE_OPT_LITERAL_ARGHELP is inferred due to the pipe
and parenthesis characters, so we don't have to provide that flag
explicitly.
Mention that -t has the same effect as --track and --track=direct.
There is no way to specify inherit mode using the short option, because
short options generally don't accept optional arguments.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh Steadmon [Tue, 18 Jan 2022 20:49:46 +0000 (12:49 -0800)]
branch,checkout: fix --track usage strings
As Ævar pointed out in [1], the use of PARSE_OPT_LITERAL_ARGHELP with a
list of allowed parameters is not recommended. Both git-branch and
git-checkout were changed in d311566 (branch: add flags and config to
inherit tracking, 2021-12-20) to use this discouraged combination for
their --track flags.
Fix this by removing PARSE_OPT_LITERAL_ARGHELP, and changing the arghelp
to simply be "mode". Users may discover allowed values in the manual
pages.
Josh Steadmon [Tue, 21 Dec 2021 03:30:24 +0000 (19:30 -0800)]
config: require lowercase for branch.*.autosetupmerge
Although we only documented that branch.*.autosetupmerge would accept
"always" as a value, the actual implementation would accept any
combination of upper- or lower-case. Fix this to be consistent with
documentation and with other values of this config variable.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh Steadmon [Tue, 21 Dec 2021 03:30:23 +0000 (19:30 -0800)]
branch: add flags and config to inherit tracking
It can be helpful when creating a new branch to use the existing
tracking configuration from the branch point. However, there is
currently not a method to automatically do so.
Teach git-{branch,checkout,switch} an "inherit" argument to the
"--track" option. When this is set, creating a new branch will cause the
tracking configuration to default to the configuration of the branch
point, if set.
For example, if branch "main" tracks "origin/main", and we run
`git checkout --track=inherit -b feature main`, then branch "feature"
will track "origin/main". Thus, `git status` will show us how far
ahead/behind we are from origin, and `git pull` will pull from origin.
This is particularly useful when creating branches across many
submodules, such as with `git submodule foreach ...` (or if running with
a patch such as [1], which we use at $job), as it avoids having to
manually set tracking info for each submodule.
Since we've added an argument to "--track", also add "--track=direct" as
another way to explicitly get the original "--track" behavior ("--track"
without an argument still works as well).
Finally, teach branch.autoSetupMerge a new "inherit" option. When this
is set, "--track=inherit" becomes the default behavior.
Josh Steadmon [Tue, 21 Dec 2021 03:30:22 +0000 (19:30 -0800)]
branch: accept multiple upstream branches for tracking
Add a new static variant of install_branch_config() that accepts
multiple remote branch names for tracking. This will be used in an
upcoming commit that enables inheriting the tracking configuration from
a parent branch.
Currently, all callers of install_branch_config() pass only a single
remote. Make install_branch_config() a small wrapper around
install_branch_config_multiple_remotes() so that existing callers do not
need to be changed.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 29 Nov 2021 23:41:51 +0000 (15:41 -0800)]
Merge branch 'mc/clean-smudge-with-llp64'
The clean/smudge conversion code path has been prepared to better
work on platforms where ulong is narrower than size_t.
* mc/clean-smudge-with-llp64:
clean/smudge: allow clean filters to process extremely large files
odb: guard against data loss checking out a huge file
git-compat-util: introduce more size_t helpers
odb: teach read_blob_entry to use size_t
t1051: introduce a smudge filter test for extremely large files
test-lib: add prerequisite for 64-bit platforms
test-tool genzeros: generate large amounts of data more efficiently
test-genzeros: allow more than 2G zeros in Windows
Junio C Hamano [Mon, 29 Nov 2021 23:41:48 +0000 (15:41 -0800)]
Merge branch 'jc/unsetenv-returns-an-int'
The compatibility implementation for unsetenv(3) were written to
mimic ancient, non-POSIX, variant seen in an old glibc; it has been
changed to return an integer to match the more modern era.
* jc/unsetenv-returns-an-int:
unsetenv(3) returns int, not void
Junio C Hamano [Mon, 29 Nov 2021 23:41:47 +0000 (15:41 -0800)]
Merge branch 'jc/fix-ref-sorting-parse'
Things like "git -c branch.sort=bogus branch new HEAD", i.e. the
operation modes of the "git branch" command that do not need the
sort key information, no longer errors out by seeing a bogus sort
key.
* jc/fix-ref-sorting-parse:
for-each-ref: delay parsing of --sort=<atom> options
Junio C Hamano [Mon, 29 Nov 2021 23:41:45 +0000 (15:41 -0800)]
Merge branch 'ab/refs-errno-cleanup'
The "remainder" of hn/refs-errno-cleanup topic.
* ab/refs-errno-cleanup: (21 commits)
refs API: post-migration API renaming [2/2]
refs API: post-migration API renaming [1/2]
refs API: don't expose "errno" in run_transaction_hook()
refs API: make expand_ref() & repo_dwim_log() not set errno
refs API: make resolve_ref_unsafe() not set errno
refs API: make refs_ref_exists() not set errno
refs API: make refs_resolve_refdup() not set errno
refs tests: ignore ignore errno in test-ref-store helper
refs API: ignore errno in worktree.c's find_shared_symref()
refs API: ignore errno in worktree.c's add_head_info()
refs API: make files_copy_or_rename_ref() et al not set errno
refs API: make loose_fill_ref_dir() not set errno
refs API: make resolve_gitlink_ref() not set errno
refs API: remove refs_read_ref_full() wrapper
refs/files: remove "name exist?" check in lock_ref_oid_basic()
reflog tests: add --updateref tests
refs API: make refs_rename_ref_available() static
refs API: make parse_loose_ref_contents() not set errno
refs API: make refs_read_raw_ref() not set errno
refs API: add a version of refs_resolve_ref_unsafe() with "errno"
...
Allow "git status --porcelain=v2" to show the number of stash
entries with --show-stash like the normal output does.
* ow/stash-count-in-status-porcelain-output:
status: print stash info with --porcelain=v2 --show-stash
status: count stash entries in separate function
Junio C Hamano [Tue, 23 Nov 2021 22:48:00 +0000 (14:48 -0800)]
Merge branch 'hm/paint-hits-in-log-grep' into maint
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with versions of PCREv2 library older
than 10.34 in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
The change in f652672 (dir: select directories correctly, 2021-09-24)
caused a regression in directory-based matches with non-cone-mode
patterns, especially for .gitignore patterns. A test is included to
prevent this regression in the future.
The commit ed495847 (dir: fix pattern matching on dirs, 2021-09-24) was
reverted in 5ceb663 (dir: fix directory-matching bug, 2021-11-02) for
similar reasons. Neither commit changed tests, and tests added later in
the series continue to pass when these commits are reverted.
Reported-by: Danial Alihosseini <danial.alihosseini@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 22 Nov 2021 05:57:03 +0000 (21:57 -0800)]
Merge branch 'hm/paint-hits-in-log-grep'
"git grep" looking in a blob that has non-UTF8 payload was
completely broken when linked with certain versions of PCREv2
library in the latest release.
* hm/paint-hits-in-log-grep:
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
Junio C Hamano [Fri, 19 Nov 2021 17:06:36 +0000 (09:06 -0800)]
Revert "grep/pcre2: fix an edge case concerning ascii patterns and UTF-8 data"
This reverts commit ae39ba431ab861548eb60b4bd2e1d8b8813db76f, as it
breaks "grep" when looking for a string in non UTF-8 haystack, when
linked with certain versions of PCREv2 library.
Erwin Villejo [Wed, 17 Nov 2021 07:55:50 +0000 (07:55 +0000)]
pull: should be noop when already-up-to-date
The already-up-to-date pull bug was fixed for --ff-only but it did not
include the case where --ff or --ff-only are not specified. This updates
the --ff-only fix to include the case where --ff or --ff-only are not
specified in command line flags or config.
Signed-off-by: Erwin Villejo <erwin.villejo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Sat, 13 Nov 2021 20:38:05 +0000 (20:38 +0000)]
SubmittingPatches: fix Asciidoc syntax in "GitHub CI" section
A superfluous ']' was added to the title of the GitHub CI section in f003a91f5c (SubmittingPatches: replace discussion of Travis with GitHub
Actions, 2021-07-22). Remove it.
While at it, format the URL for a GitHub user's workflow runs of Git
between backticks, since if not Asciidoc formats only the first part,
"https://github.com/<Your", as a link, which is not very useful.
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Thu, 11 Nov 2021 00:54:16 +0000 (08:54 +0800)]
l10n: ko: fix typos found by git-po-helper
When checking typos in file "po/ko.po", "git-po-helper" reports lots of
false positives because there are no spaces between ASCII and Korean
characters. After applied commit adee197 "(dict: add smudge table for
Korean language, 2021-11-11)" of "git-l10n/git-po-helper" to suppress
these false positives, some easy-to-fix typos are found and fixed.
Josh Steadmon [Thu, 11 Nov 2021 22:34:25 +0000 (14:34 -0800)]
trace2: increment event format version
In 64bc752 (trace2: add trace2_child_ready() to report on background
children, 2021-09-20), we added a new "child_ready" event. In
Documentation/technical/api-trace2.txt, we promise that adding a new
event type will result in incrementing the trace2 event format version
number, but this was not done. Correct this in code & docs.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-file: free(*contents) only in read_loose_object() caller
In the preceding commit a free() of uninitialized memory regression in 96e41f58fe1 (fsck: report invalid object type-path combinations,
2021-10-01) was fixed, but we'd still have an issue with leaking
memory from fsck_loose(). Let's fix that issue too.
That issue was introduced in my 31deb28f5e0 (fsck: don't hard die on
invalid object types, 2021-10-01). It can be reproduced under
SANITIZE=leak with the test I added in 093fffdfbec (fsck tests: add
test for fsck-ing an unknown type, 2021-10-01):
./t1450-fsck.sh --run=84 -vixd
In some sense it's not a problem, we lost the same amount of memory in
terms of things malloc'd and not free'd. It just moved from the "still
reachable" to "definitely lost" column in valgrind(1) nomenclature[1],
since we'd have die()'d before.
But now that we don't hard die() anymore in the library let's properly
free() it. Doing so makes this code much easier to follow, since we'll
now have one function owning the freeing of the "contents" variable,
not two.
For context on that memory management pattern the read_loose_object()
function was added in f6371f92104 (sha1_file: add read_loose_object()
function, 2017-01-13) and subsequently used in c68b489e564 (fsck:
parse loose object paths directly, 2017-01-13). The pattern of it
being the task of both sides to free() the memory has been there in
this form since its inception.
Junio C Hamano [Thu, 11 Nov 2021 20:34:41 +0000 (12:34 -0800)]
Revert "connected: do not sort input revisions"
This reverts commit f45022dc2fd692fd024f2eb41a86a66f19013d43,
as this is like breakage in the traversal more likely. In a
history with 10 single strand of pearls,
1-->2-->3--...->7-->8-->9-->10
asking "rev-list --unsorted-input 1 10 --not 9 8 7 6 5 4" fails to
paint the bottom 1 uninteresting as the traversal stops, without
completing the propagation of uninteresting bit starting at 4 down
through 3 and 2 to 1.
object-file: fix SEGV on free() regression in v2.34.0-rc2
Fix a regression introduced in my 96e41f58fe1 (fsck: report invalid
object type-path combinations, 2021-10-01). When fsck-ing blobs larger
than core.bigFileThreshold, we'd free() a pointer to uninitialized
memory.
This issue would have been caught by SANITIZE=address, but since it
involves core.bigFileThreshold, none of the existing tests in our test
suite covered it.
Running them with the "big_file_threshold" in "environment.c" changed
to say "6" would have shown this failure, but let's add a dedicated
test for this scenario based on Han Xin's report[1].
The bug was introduced between v9 and v10[2] of the fsck series merged
in 061a21d36d8 (Merge branch 'ab/fsck-unexpected-type', 2021-10-25).
Reported-by: Han Xin <chiyutianyi@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 10 Nov 2021 23:01:20 +0000 (15:01 -0800)]
Merge branch 'js/simple-ipc-cygwin-socket-fix'
The way Cygwin emulates a unix-domain socket, on top of which the
simple-ipc mechanism is implemented, can race with the program on
the other side that wants to use the socket, and briefly make it
appear as a regular file before lstat(2) starts reporting it as a
socket. We now have a workaround on the side that connects to a
unix domain socket.
* js/simple-ipc-cygwin-socket-fix:
simple-ipc: work around issues with Cygwin's Unix socket emulation
"git pull --ff-only" and "git pull --rebase --ff-only" should make
it a no-op to attempt pulling from a remote that is behind us, but
instead the command errored out by saying it was impossible to
fast-forward, which may technically be true, but not a useful thing
to diagnose as an error. This has been corrected.
* jc/fix-pull-ff-only-when-already-up-to-date:
pull: --ff-only should make it a noop when already-up-to-date
Jeff King [Wed, 10 Nov 2021 06:00:47 +0000 (01:00 -0500)]
t/lib-gpg: avoid broken versions of ssh-keygen
The "-Y find-principals" option of ssh-keygen seems to be broken in
Debian's openssh-client 1:8.7p1-1, whereas it works fine in 1:8.4p1-5.
This causes several failures for GPGSSH tests. We fulfill the
prerequisite because generating the keys works fine, but actually
verifying a signature causes results ranging from bogus results to
ssh-keygen segfaulting.
We can find the broken version during the prereq check by feeding it
empty input. This should result in it complaining to stderr, but in the
broken version it triggers the segfault, causing the GPGSSH tests to be
skipped.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 10 Nov 2021 18:35:59 +0000 (18:35 +0000)]
maintenance: disable cron on macOS
In eba1ba9 (maintenance: `git maintenance run` learned
`--scheduler=<scheduler>`, 2021-09-04), we introduced the ability to
specify a scheduler explicitly. This led to some extra checks around
whether an alternative scheduler was available. This added the
functionality of removing background maintenance from schedulers other
than the one selected.
On macOS, cron is technically available, but running 'crontab' triggers
a UI prompt asking for special permissions. This is the major reason why
launchctl is used as the default scheduler. The is_crontab_available()
method triggers this UI prompt, causing user disruption.
Remove this disruption by using an #ifdef to prevent running crontab
this way on macOS. This has the unfortunate downside that if a user
manually selects cron via the '--scheduler' option, then adjusting the
scheduler later will not remove the schedule from cron. The
'--scheduler' option ignores the is_available checks, which is how we
can get into this situation.
Extract the new check_crontab_process() method to avoid making the
'child' variable unused on macOS. The method is marked MAYBE_UNUSED
because it has no callers on macOS.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
simple-ipc: work around issues with Cygwin's Unix socket emulation
Cygwin emulates Unix sockets by writing files with custom contents and
then marking them as system files.
The tricky problem is that while the file is written and its `system`
bit is set, it is still identified as a file. This caused test failures
when Git is too fast looking for the Unix sockets and then complains
that there is a plain file in the way.
Let's work around this by adding a delayed retry loop, specifically for
Cygwin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Tested-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Wed, 10 Nov 2021 00:55:14 +0000 (08:55 +0800)]
Merge branch 'master' of github.com:git/git
* 'master' of github.com:git/git:
Git 2.34-rc2
parse-options.[ch]: revert use of "enum" for parse_options()
t/lib-git.sh: fix ACL-related permissions failure
A few fixes before -rc2
async_die_is_recursing: work around GCC v11.x issue on Fedora
Document positive variant of commit and merge option "--no-verify"
pull: honor --no-verify and do not call the commit-msg hook
http-backend: remove a duplicated code branch
parse-options.[ch]: revert use of "enum" for parse_options()
Revert the parse_options() prototype change in my recent 352e761388b (parse-options.[ch]: consistently use "enum
parse_opt_result", 2021-10-08) was incorrect. The parse_options()
function returns the number of argc elements that haven't been
processed, not "enum parse_opt_result".
Reported-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adam Dinwoodie [Fri, 5 Nov 2021 19:31:06 +0000 (19:31 +0000)]
t/lib-git.sh: fix ACL-related permissions failure
As well as checking that the relevant functionality is available, the
GPGSSH prerequisite check creates the SSH keys that are used by the test
functions it gates. If these keys are created in a directory that
has a default Access Control List, the key files can inherit those
permissions.
This can result in a scenario where the private keys are created
successfully, so the prerequisite check passes and the tests are run,
but the key files have permissions that are too permissive, meaning
OpenSSH will refuse to load them and the tests will fail.
To avoid this happening, before creating the keys, clear any default ACL
set on the directory that will contain them. This step allowed to fail;
if setfacl isn't present, that's a very likely indicator that the
filesystem in question simply doesn't support default ACLs.
Helped-by: Fabian Stelzer <fs@gigacodes.de> Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
