Yishai Hadas [Tue, 13 May 2025 11:02:40 +0000 (14:02 +0300)]
RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage
The MLX5_IB_STAGE_UAR stage in the RDMA driver is redundant and should
be removed.
Responsibility for initializing the device's UAR pointer
(mdev->priv.uar) lies with mlx5_core, which already sets it during the
mlx5_load() process.
At present, the RDMA UAR stage overwrites this pointer, which was
correctly initialized by mlx5_core, creating the risk of inconsistency.
Ownership and management of the UAR pointer should remain exclusively
within mlx5_core.
In the current upstream code, we luckily receive the same pointer, since
mlx5_get_uars_page() still finds available BF registers for that UAR,
allowing it to be shared.
However, future changes in mlx5_core may expose this flaw.
For instance, if mlx5_alloc_bfreg() is invoked twice before the RDMA UAR
stage runs, the RDMA driver may overwrite the UAR allocated by
mlx5_core.
This could lead to real bugs. For example, if mlx5_ib is unloaded
(rmmod), it might free the UAR, leaving mlx5_core with a dangling
reference to an invalid UAR.
To align with review comments, the patch series introducing RDMA
RoCEv2 support for the Intel Infrastructure Processing Unit (IPU)
E2000 line of products is going to be submitted in three parts:
1. Modify ice to use specific and common IIDC definitions and
pass a core device info to irdma.
2. Add RDMA support to idpf and modify idpf to use specific and
common IIDC definitions and pass a core device info to irdma.
3. Add RDMA RoCEv2 support for the E2000 products, referred to as
GEN3 to irdma.
This first part is a 5 patch series based on the original
"iidc/ice/irdma: Update IDC to support multiple consumers" patch
to allow for multiple CORE PCI drivers, using the auxbus.
Patches:
1) Move header file to new name for clarity and replace ice
specific DSCP define with a kernel equivalent one in irdma
2) Unify naming convention
3) Separate header file into common and driver specific info
4) Replace ice specific DSCP define with a kernel equivalent
one in ice
5) Implement core device info struct and update drivers to use it
----------------------------------------------------------------
* 'for-next' of https://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
iidc/ice/irdma: Update IDC to support multiple consumers
ice: Replace ice specific DSCP mapping num with a kernel define
iidc/ice/irdma: Break iidc.h into two headers
iidc/ice/irdma: Rename to iidc_* convention
iidc/ice/irdma: Rename IDC header file
RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last
deref") simplified cm_id resource management by freeing cm_id once all
references to the cm_id were removed. The references are removed either
upon completion of iw_cm event handlers or when the application destroys
the cm_id. This commit introduced the use-after-free condition where
cm_id_private object could still be in use by event handler works during
the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a
use-after-free related to destroying CM IDs") addressed this use-after-
free by flushing all pending works at the cm_id destruction.
However, still another use-after-free possibility remained. It happens
with the work objects allocated for each cm_id_priv within
alloc_work_entries() during cm_id creation, and subsequently freed in
dealloc_work_entries() once all references to the cm_id are removed.
If the cm_id's last reference is decremented in the event handler work,
the work object for the work itself gets removed, and causes the use-
after-free BUG below:
BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250
Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091
Last potentially related work creation:
kasan_save_stack+0x2c/0x50
kasan_record_aux_stack+0xa3/0xb0
__queue_work+0x2ff/0x1390
queue_work_on+0x67/0xc0
cm_event_handler+0x46a/0x820 [iw_cm]
siw_cm_upcall+0x330/0x650 [siw]
siw_cm_work_handler+0x6b9/0x2b20 [siw]
process_one_work+0x84f/0x1460
worker_thread+0x5ef/0xfd0
kthread+0x3b0/0x770
ret_from_fork+0x30/0x70
ret_from_fork_asm+0x1a/0x30
This BUG is reproducible by repeating the blktests test case nvme/061
for the rdma transport and the siw driver.
To avoid the use-after-free of cm_id_private work objects, ensure that
the last reference to the cm_id is decremented not in the event handler
works, but in the cm_id destruction context. For that purpose, move
iwcm_deref_id() call from destroy_cm_id() to the callers of
destroy_cm_id(). In iw_destroy_cm_id(), call iwcm_deref_id() after
flushing the pending works.
During the fix work, I noticed that iw_destroy_cm_id() is called from
cm_work_handler() and process_event() context. However, the comment of
iw_destroy_cm_id() notes that the function "cannot be called by the
event thread". Drop the false comment.
Closes: https://lore.kernel.org/linux-rdma/r5676e754sv35aq7cdsqrlnvyhiq5zktteaurl7vmfih35efko@z6lay7uypy3c/ Fixes: 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") Cc: stable@vger.kernel.org Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://patch.msgid.link/20250510101036.1756439-1-shinichiro.kawasaki@wdc.com Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic
Allow mana_ib to be created over ethernet gdma device and
over rnic gdma device. The HW has two devices with different
capabilities and different use-cases. Initialize required
resources depending on the used gdma device.
Colin Ian King [Wed, 7 May 2025 13:18:34 +0000 (14:18 +0100)]
RDMA/siw: replace redundant ternary operator with just rv
The use of the ternary operator on rv is redundant, rv is
either the initialized value of 0 or a negative error return
code, so it can never be greater than zero, and hence the
zero assignment in ternary operator is redundant. Just return
rv instead.
Leon Romanovsky [Mon, 28 Apr 2025 09:22:17 +0000 (12:22 +0300)]
mm/hmm: provide generic DMA managing logic
HMM callers use PFN list to populate range while calling
to hmm_range_fault(), the conversion from PFN to DMA address
is done by the callers with help of another DMA list. However,
it is wasteful on any modern platform and by doing the right
logic, that DMA list can be avoided.
Provide generic logic to manage these lists and gave an interface
to map/unmap PFNs to DMA addresses, without requiring from the callers
to be an experts in DMA core API.
Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Leon Romanovsky [Mon, 28 Apr 2025 09:22:16 +0000 (12:22 +0300)]
mm/hmm: let users to tag specific PFN with DMA mapped bit
Introduce new sticky flag (HMM_PFN_DMA_MAPPED), which isn't overwritten
by HMM range fault. Such flag allows users to tag specific PFNs with
information if this specific PFN was already DMA mapped.
Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Leon Romanovsky [Mon, 12 May 2025 09:04:15 +0000 (05:04 -0400)]
Provide a new two step DMA mapping API
Currently the only efficient way to map a complex memory description through
the DMA API is by using the scatter list APIs. The SG APIs are unique in that
they efficiently combine the two fundamental operations of sizing and allocating
a large IOVA window from the IOMMU and processing all the per-address
swiotlb/flushing/p2p/map details.
This uniqueness has been a long standing pain point as the scatter list API
is mandatory, but expensive to use. It prevents any kind of optimization or
feature improvement (such as avoiding struct page for P2P) due to the
impossibility of improving the scatter list.
Several approaches have been explored to expand the DMA API with additional
scatterlist-like structures (BIO, rlist), instead split up the DMA API
to allow callers to bring their own data structure.
The API is split up into parts:
- Allocate IOVA space:
To do any pre-allocation required. This is done based on the caller
supplying some details about how much IOMMU address space it would need
in worst case.
- Map and unmap relevant structures to pre-allocated IOVA space:
Perform the actual mapping into the pre-allocated IOVA. This is very
similar to dma_map_page().
Junxian Huang [Wed, 7 May 2025 03:39:03 +0000 (11:39 +0800)]
RDMA/hns: Fix build error of hns_roce_trace
Add include path to find hns_roce_trace.h to fix the following
build error:
In file included from drivers/infiniband/hw/hns/hns_roce_trace.h:213,
from drivers/infiniband/hw/hns/hns_roce_hw_v2.c:53:
./include/trace/define_trace.h:110:42: fatal error: ./hns_roce_trace.h: No such file or directory
110 | #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
| ^
compilation terminated.
Fixes: 02007e3ddc07 ("RDMA/hns: Add trace for flush CQE") Reported-by: Paul E. McKenney <paulmck@kernel.org> Closes: https://lore.kernel.org/linux-next/b7dd4dda-37d8-47e4-8d78-b6585be21cfd@paulmck-laptop/T/#t Tested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://patch.msgid.link/20250507033903.2879433-1-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
Dave Ertman [Wed, 16 Apr 2025 02:15:49 +0000 (21:15 -0500)]
iidc/ice/irdma: Update IDC to support multiple consumers
In preparation of supporting more than a single core PCI driver
for RDMA, move ice specific structs like qset_params, qos_info
and qos_params from iidc_rdma.h to iidc_rdma_ice.h.
Previously, the ice driver was just exporting its entire PF struct
to the auxiliary driver, but since each core driver will have its own
different PF struct, implement a universal struct that all core drivers
can provide to the auxiliary driver through the probe call.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add helper that allows a driver to skip calling dma_unmap_*
if the DMA layer can guarantee that they are no-nops.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Leon Romanovsky [Mon, 5 May 2025 07:01:44 +0000 (10:01 +0300)]
dma-mapping: Implement link/unlink ranges API
Introduce new DMA APIs to perform DMA linkage of buffers
in layers higher than DMA.
In proposed API, the callers will perform the following steps.
In map path:
if (dma_can_use_iova(...))
dma_iova_alloc()
for (page in range)
dma_iova_link_next(...)
dma_iova_sync(...)
else
/* Fallback to legacy map pages */
for (all pages)
dma_map_page(...)
In unmap path:
if (dma_can_use_iova(...))
dma_iova_destroy()
else
for (all pages)
dma_unmap_page(...)
Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
iommu/dma: Factor out a iommu_dma_map_swiotlb helper
Split the iommu logic from iommu_dma_map_page into a separate helper.
This not only keeps the code neatly separated, but will also allow for
reuse in another caller.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Leon Romanovsky [Mon, 5 May 2025 07:01:42 +0000 (10:01 +0300)]
dma-mapping: Provide an interface to allow allocate IOVA
The existing .map_pages() callback provides both allocating of IOVA
and linking DMA pages. That combination works great for most of the
callers who use it in control paths, but is less effective in fast
paths where there may be multiple calls to map_page().
These advanced callers already manage their data in some sort of
database and can perform IOVA allocation in advance, leaving range
linkage operation to be in fast path.
Provide an interface to allocate/deallocate IOVA and next patch
link/unlink DMA ranges to that specific IOVA.
In the new API a DMA mapping transaction is identified by a
struct dma_iova_state, which holds some recomputed information
for the transaction which does not change for each page being
mapped, so add a check if IOVA can be used for the specific
transaction.
The API is exported from dma-iommu as it is the only implementation
supported, the namespace is clearly different from iommu_* functions
which are not allowed to be used. This code layout allows us to save
function call per API call used in datapath as well as a lot of boilerplate
code.
Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Leon Romanovsky [Mon, 5 May 2025 07:01:41 +0000 (10:01 +0300)]
iommu: add kernel-doc for iommu_unmap_fast
Add kernel-doc section for iommu_unmap_fast to document existing
limitation of underlying functions which can't split individual ranges.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
iommu: generalize the batched sync after map interface
For the upcoming IOVA-based DMA API we want to batch the
ops->iotlb_sync_map() call after mapping multiple IOVAs from
dma-iommu without having a scatterlist. Improve the API.
Add a wrapper for the map_sync as iommu_sync_map() so that callers
don't need to poke into the methods directly.
Formalize __iommu_map() into iommu_map_nosync() which requires the
caller to call iommu_sync_map() after all maps are completed.
Refactor the existing sanity checks from all the different layers
into iommu_map_nosync().
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Will Deacon <will@kernel.org> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
To support the upcoming non-scatterlist mapping helpers, we need to go
back to have them called outside of the DMA API. Thus move them out of
dma-map-ops.h, which is only for DMA API implementations to pci-p2pdma.h,
which is for driver use.
Note that the core helper is still not exported as the mapping is
expected to be done only by very highlevel subsystem code at least for
now.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The current scheme with a single helper to determine the P2P status
and map a scatterlist segment force users to always use the map_sg
helper to DMA map, which we're trying to get away from because they
are very cache inefficient.
Refactor the code so that there is a single helper that checks the P2P
state for a page, including the result that it is not a P2P page to
simplify the callers, and a second one to perform the address translation
for a bus mapped P2P transfer that does not depend on the scatterlist
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
RDMA/mlx5: Fix error flow upon firmware failure for RQ destruction
Upon RQ destruction if the firmware command fails which is the
last resource to be destroyed some SW resources were already cleaned
regardless of the failure.
Now properly rollback the object to its original state upon such failure.
IB/cm: Drop lockdep assert and WARN when freeing old msg
The send completion handler can run after cm_id has advanced to another
message. The cm_id lock is not needed in this case, but a recent change
re-used cm_free_priv_msg(), which asserts that the lock is held and
WARNs if the cm_id's currently outstanding msg is different than the one
being freed.
Dave Ertman [Wed, 16 Apr 2025 02:15:47 +0000 (21:15 -0500)]
iidc/ice/irdma: Break iidc.h into two headers
In preparation of supporting more than a single core PCI driver
for RDMA, break the iidc_rdma.h header file into two more focused
headers.
Only the elements universal to all Intel drivers will remain in
the generic iidc_rdma.h header. Move the ice specific information
to an ice specific header file named iidc_rdma_ice.h.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dave Ertman [Wed, 16 Apr 2025 02:15:45 +0000 (21:15 -0500)]
iidc/ice/irdma: Rename IDC header file
To prepare for the IDC upgrade to support different CORE
PCI drivers, rename header file from iidc.h to iidc_rdma.h
since this files functionality is specifically for RDMA support.
Use net/dscp.h include in irdma osdep.h and DSCP_MAX type.h,
instead of iidc header and define.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct tid_rb_node **", but the return type will be
"struct rb_node **". These are the same allocation size (pointer size),
but the types do not match. Adjust the allocation type to match the
assignment.
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "unsigned long **", but the returned type will be
"long **". These are the same allocation size (pointer size), but the
types do not match. Adjust the allocation type to match the assignment.
hns_roce_hw_v2.h has a direct dependency on hnae3.h due to the
inline function hns_roce_write64(), but it doesn't include this
header currently. This leads to that files including
hns_roce_hw_v2.h must also include hnae3.h to avoid compilation
errors, even if they themselves don't really rely on hnae3.h.
This doesn't make sense, hns_roce_hw_v2.h should include hnae3.h
directly.
Major linux distibutions have phased out support for 32-bit machines. Since
rxe is primarily used for development and testing, the benefit of
maintaining 32-bit support is minimal. This change simplifies ATOMIC WRITE
implementations and improves maintainability of the driver.
In the function rxe_create_qp, the function rxe_qp_from_init is called
to create qp, if this function rxe_qp_from_init fails, rxe_cleanup will
be called to handle all the allocated resources, including the timers:
retrans_timer and rnr_nak_timer.
The function rxe_qp_from_init calls the function rxe_qp_init_req to
initialize the timers: retrans_timer and rnr_nak_timer.
But these timers are initialized in the end of rxe_qp_init_req.
If some errors occur before the initialization of these timers, this
problem will occur.
The solution is to check whether these timers are initialized or not.
If these timers are not initialized, ignore these timers.
Fixes: 8700e3e7c485 ("Soft RoCE driver") Reported-by: syzbot+4edb496c3cad6e953a31@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4edb496c3cad6e953a31 Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev> Link: https://patch.msgid.link/20250419080741.1515231-1-yanjun.zhu@linux.dev Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping looks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Jacob Moroni [Thu, 20 Feb 2025 17:56:12 +0000 (17:56 +0000)]
IB/cm: use rwlock for MAD agent lock
In workloads where there are many processes establishing connections using
RDMA CM in parallel (large scale MPI), there can be heavy contention for
mad_agent_lock in cm_alloc_msg.
This contention can occur while inside of a spin_lock_irq region, leading
to interrupts being disabled for extended durations on many
cores. Furthermore, it leads to the serialization of rdma_create_ah calls,
which has negative performance impacts for NICs which are capable of
processing multiple address handle creations in parallel.
The end result is the machine becoming unresponsive, hung task warnings,
netdev TX timeouts, etc.
Since the lock appears to be only for protection from cm_remove_one, it
can be changed to a rwlock to resolve these issues.
Reproducer:
Server:
for i in $(seq 1 512); do
ucmatose -c 32 -p $((i + 5000)) &
done
Client:
for i in $(seq 1 512); do
ucmatose -c 32 -p $((i + 5000)) -s 10.2.0.52 &
done
Fixes: 76039ac9095f ("IB/cm: Protect cm_dev, cm_ports and mad_agent with kref and lock") Link: https://patch.msgid.link/r/20250220175612.2763122-1-jmoroni@google.com Signed-off-by: Jacob Moroni <jmoroni@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unused flex-array member `class_data` from
`struct opa_mad_notice_attr`.
Fix the following warning:
drivers/infiniband/hw/hfi1/mad.c:23:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Peng Jiang [Wed, 26 Mar 2025 14:19:55 +0000 (22:19 +0800)]
RDMA: Replace msecs_to_jiffies with secs_to_jiffies for timeout
In drivers/infiniband/hw/mlx4/mcg.c and drivers/infiniband/hw/mlx5/mr.c,
`msecs_to_jiffies` is used to convert milliseconds to jiffies.
For constant milliseconds, using `msecs_to_jiffies` introduces additional
computational overhead. For example, it is unnecessary to check
if m > jiffies_to_msecs(MAX_JIFFY_OFFSET) or (int)m < 0 for constants,
while using `secs_to_jiffies` can avoid these extra calculations.
Easwar Hariharan [Wed, 19 Feb 2025 21:36:40 +0000 (21:36 +0000)]
RDMA/mlx5: convert timeouts to secs_to_jiffies()
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
tools/include: make uapi/linux/types.h usable from assembly
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.
Mirror this behaviour in the tools/ variant.
Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.
Reported-by: Mark Brown <broonie@kernel.org> Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/ Fixes: c9fbaa879508 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc
driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT
* tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
Len Brown [Sun, 6 Apr 2025 18:49:20 +0000 (14:49 -0400)]
tools/power turbostat: v2025.05.06
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Merge tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix a perf events time accounting bug"
* tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix child_total_time_enabled accounting bug at task exit
Merge tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a nonsensical Kconfig combination
- Remove an unnecessary rseq-notification
* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Eliminate useless task_work on execve
sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09de3 ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Len Brown [Sun, 6 Apr 2025 15:18:39 +0000 (11:18 -0400)]
tools/power turbostat: report CoreThr per measurement interval
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053fe30 ("turbostat: Support thermal throttle count print") Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: Chen Yu <yu.c.chen@intel.com>
Justin Ernst [Wed, 19 Mar 2025 20:27:31 +0000 (15:27 -0500)]
tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Signed-off-by: Len Brown <len.brown@intel.com>
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
Merge tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irq updates from Thomas Gleixner:
"A set of updates for the interrupt subsystem:
- A treewide cleanup for the irq_domain code, which makes the naming
consistent and gets rid of the original oddity of naming domains
'host'.
This is a trivial mechanical change and is done late to ensure that
all instances have been catched and new code merged post rc1 wont
reintroduce new instances.
- A trivial consistency fix in the migration code
The recent introduction of irq_force_complete_move() in the core
code, causes a problem for the nostalgia crowd who maintains ia64
out of tree.
The code assumes that hierarchical interrupt domains are enabled
and dereferences irq_data::parent_data unconditionally. That works
in mainline because both architectures which enable that code have
hierarchical domains enabled. Though it breaks the ia64 build,
which enables the functionality, but does not have hierarchical
domains.
While it's not really a problem for mainline today, this
unconditional dereference is inconsistent and trivially fixable by
using the existing helper function irqd_get_parent_data(), which
has the appropriate #ifdeffery in place"
* tag 'irq-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/migration: Use irqd_get_parent_data() in irq_force_complete_move()
irqdomain: Stop using 'host' for domain
irqdomain: Rename irq_get_default_host() to irq_get_default_domain()
irqdomain: Rename irq_set_default_host() to irq_set_default_domain()
Merge tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A revert to fix a adjtimex() regression:
The recent change to prevent that time goes backwards for the coarse
time getters due to immediate multiplier adjustments via adjtimex(),
changed the way how the timekeeping core treats that.
That change result in a regression on the adjtimex() side, which is
user space visible:
1) The forwarding of the base time moves the update out of the
original period and establishes a new one. That's changing the
behaviour of the [PF]LL control, which user space expects to be
applied periodically.
2) The clearing of the accumulated NTP error due to #1, changes the
behaviour as well.
An attempt to delay the multiplier/frequency update to the next tick
did not solve the problem as userspace expects that the multiplier or
frequency updates are in effect, when the syscall returns.
There is a different solution for the coarse time problem available,
so revert the offending commit to restore the existing adjtimex()
behaviour"
* tag 'timers-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "timekeeping: Fix possible inconsistencies in _COARSE clockids"
Merge tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"One important fix and one small configuration update.
The first patch by Artur Rojek fixes an issue with the J2 firmware
loader not being able to find the location of the device tree blob due
to insufficient alignment of the .bss section which rendered J2 boards
unbootable.
The second patch by Johan Korsnes updates the defconfigs on sh to drop
the CONFIG_NET_CLS_TCINDEX configuration option which became obsolete
after 8c710f75256b ("net/sched: Retire tcindex classifier").
Summary:
- sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
- sh: Align .bss section padding to 8-byte boundary"
* tag 'sh-for-v6.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
sh: Align .bss section padding to 8-byte boundary
Merge tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Improve performance in gendwarfksyms
- Remove deprecated EXTRA_*FLAGS and KBUILD_ENABLE_EXTRA_GCC_CHECKS
- Support CONFIG_HEADERS_INSTALL for ARCH=um
- Use more relative paths to sources files for better reproducibility
- Support the loong64 Debian architecture
- Add Kbuild bash completion
- Introduce intermediate vmlinux.unstripped for architectures that need
static relocations to be stripped from the final vmlinux
- Fix versioning in Debian packages for -rc releases
- Treat missing MODULE_DESCRIPTION() as an error
- Convert Nios2 Makefiles to use the generic rule for built-in DTB
- Add debuginfo support to the RPM package
* tag 'kbuild-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (40 commits)
kbuild: rpm-pkg: build a debuginfo RPM
kconfig: merge_config: use an empty file as initfile
nios2: migrate to the generic rule for built-in DTB
rust: kbuild: skip `--remap-path-prefix` for `rustdoc`
kbuild: pacman-pkg: hardcode module installation path
kbuild: deb-pkg: don't set KBUILD_BUILD_VERSION unconditionally
modpost: require a MODULE_DESCRIPTION()
kbuild: make all file references relative to source root
x86: drop unnecessary prefix map configuration
kbuild: deb-pkg: add comment about future removal of KDEB_COMPRESS
kbuild: Add a help message for "headers"
kbuild: deb-pkg: remove "version" variable in mkdebian
kbuild: deb-pkg: fix versioning for -rc releases
Documentation/kbuild: Fix indentation in modules.rst example
x86: Get rid of Makefile.postlink
kbuild: Create intermediate vmlinux build with relocations preserved
kbuild: Introduce Kconfig symbol for linking vmlinux with relocations
kbuild: link-vmlinux.sh: Make output file name configurable
kbuild: do not generate .tmp_vmlinux*.map when CONFIG_VMLINUX_MAP=y
Revert "kheaders: Ignore silly-rename files"
...
Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly from the end of last week, this week was very
quiet, maybe you scared everyone away. It's mostly amdgpu, and xe,
with some i915, adp and bridge bits, since I think this is overly
quiet I'd expect rc2 to be a bit more lively.
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
xe:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
i915:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
adp:
- Fix error handling in plane setup"
# -----BEGIN PGP SIGNATURE-----
* tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER
drm/amdgpu/gfx12: fix num_mec
drm/amdgpu/gfx11: fix num_mec
drm/amd/pm: Add gpu_metrics_v1_8
drm/amdgpu: Prefer shadow rom when available
drm/amd/pm: Update smu metrics table for smu_v13_0_6
drm/amd/pm: Remove host limit metrics support
Remove unnecessary firmware version check for gc v9_4_2
drm/amdgpu: stop unmapping MQD for kernel queues v3
Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA"
drm/amdgpu: Parse all deferred errors with UMC aca handle
drm/amdgpu: Update ta ras block
drm/amdgpu: Add NPS2 to DPX compatible mode
drm/amdgpu: Use correct gfx deferred error count
drm/amd/display: Actually do immediate vblank disable
drm/amd/display: prevent hang on link training fail
Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting"
drm/amd/display: Increase vblank offdelay for PSR panels
drm/amd: Handle being compiled without SI or CIK support better
drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2
...
Uday Shankar [Mon, 31 Mar 2025 22:46:32 +0000 (16:46 -0600)]
kbuild: rpm-pkg: build a debuginfo RPM
The rpm-pkg make target currently suffers from a few issues related to
debuginfo:
1. debuginfo for things built into the kernel (vmlinux) is not available
in any RPM produced by make rpm-pkg. This makes using tools like
systemtap against a make rpm-pkg kernel impossible.
2. debug source for the kernel is not available. This means that
commands like 'disas /s' in gdb, which display source intermixed with
assembly, can only print file names/line numbers which then must be
painstakingly resolved to actual source in a separate editor.
3. debuginfo for modules is available, but it remains bundled with the
.ko files that contain module code, in the main kernel RPM. This is a
waste of space for users who do not need to debug the kernel (i.e.
most users).
Address all of these issues by additionally building a debuginfo RPM
when the kernel configuration allows for it, in line with standard
patterns followed by RPM distributors. With these changes:
1. systemtap now works (when these changes are backported to 6.11, since
systemtap lags a bit behind in compatibility), as verified by the
following simple test script:
129 op_str = blk_op_name[op];
130
131 return op_str;
132 }
0xffffffff814c8768 <+40>: jmp 0xffffffff81d01360 <__x86_return_thunk>
End of assembler dump.
3. The size of the main kernel package goes down substantially,
especially if many modules are built (quite typical). Here is a
comparison of installed size of the kernel package (configured with
allmodconfig, dwarf4 debuginfo, and module compression turned off)
before and after this patch:
# rpm -qi kernel-6.13* | grep -E '^(Version|Size)'
Version : 6.13.0postpatch+
Size : 1382874089
Version : 6.13.0prepatch+
Size : 17870795887
This is a ~92% size reduction.
Note that a debuginfo package can only be produced if the following
configs are set:
- CONFIG_DEBUG_INFO=y
- CONFIG_MODULE_COMPRESS=n
- CONFIG_DEBUG_INFO_SPLIT=n
The first of these is obvious - we can't produce debuginfo if the build
does not generate it. The second two requirements can in principle be
removed, but doing so is difficult with the current approach, which uses
a generic rpmbuild script find-debuginfo.sh that processes all packaged
executables. If we want to remove those requirements the best path
forward is likely to add some debuginfo extraction/installation logic to
the modules_install target (controllable by flags). That way, it's
easier to operate on modules before they're compressed, and the logic
can be reused by all packaging targets.
Daniel Gomez [Fri, 28 Mar 2025 14:28:37 +0000 (14:28 +0000)]
kconfig: merge_config: use an empty file as initfile
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).
Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Sun, 22 Dec 2024 00:30:53 +0000 (09:30 +0900)]
nios2: migrate to the generic rule for built-in DTB
Commit 654102df2ac2 ("kbuild: add generic support for built-in boot
DTBs") introduced generic support for built-in DTBs.
Select GENERIC_BUILTIN_DTB when built-in DTB support is enabled.
To keep consistency across architectures, this commit also renames
CONFIG_NIOS2_DTB_SOURCE_BOOL to CONFIG_BUILTIN_DTB, and
CONFIG_NIOS2_DTB_SOURCE to CONFIG_BUILTIN_DTB_NAME.
Johan Korsnes [Sun, 23 Mar 2025 19:13:30 +0000 (20:13 +0100)]
sh: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX
This option was removed from Kconfig in 8c710f75256b ("net/sched:
Retire tcindex classifier") but from the defconfigs.
Fixes: 8c710f75256b ("net/sched: Retire tcindex classifier") Signed-off-by: Johan Korsnes <johan.korsnes@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Artur Rojek [Sun, 16 Feb 2025 17:55:44 +0000 (18:55 +0100)]
sh: Align .bss section padding to 8-byte boundary
J2-based devices expect to find a device tree blob at the end of the
.bss section. As of a77725a9a3c5 ("scripts/dtc: Update to upstream
version v1.6.1-19-g0a3a9d3449c8"), libfdt enforces 8-byte alignment
for the DTB, causing J2 devices to fail early in sh_fdt_init().
As the J2 loader firmware calculates the DTB location based on the kernel
image .bss section size rather than the __bss_stop symbol offset, the
required alignment can't be enforced with BSS_SECTION(0, PAGE_SIZE, 8).
To fix this, inline a modified version of the above macro which grows
.bss by the required size. While this change affects all existing SH
boards, it should be benign on platforms which don't need this alignment.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Tested-by: Rob Landley <rob@landley.net> Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
Nam Cao [Wed, 5 Feb 2025 10:55:20 +0000 (11:55 +0100)]
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename debug_init_on_stack() to debug_setup_on_stack() as well, to keep the
names consistent.
Nam Cao [Wed, 5 Feb 2025 10:55:18 +0000 (11:55 +0100)]
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
All the hrtimer_init*() functions have been renamed to hrtimer_setup*().
Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper() as well, to
keep the names consistent.
Nam Cao [Wed, 5 Feb 2025 10:55:17 +0000 (11:55 +0100)]
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
The struct hrtimer::function field can only be changed using
hrtimer_setup*() or hrtimer_update_function(), and both already null-check
'function'. Therefore, null-checking 'function' in hrtimer_start_range_ns()
is not necessary.
Nam Cao [Wed, 5 Feb 2025 10:55:16 +0000 (11:55 +0100)]
hrtimers: Make callback function pointer private
Make the struct hrtimer::function field private, to prevent users from
changing this field in an unsafe way. hrtimer_update_function() should be
used if the callback function needs to be changed.
Nam Cao [Wed, 5 Feb 2025 10:55:11 +0000 (11:55 +0100)]
hrtimers: Switch to use __htimer_setup()
__hrtimer_init_sleeper() calls __hrtimer_init() and also sets up the
callback function. But there is already __hrtimer_setup() which does both
actions.
Switch to use __hrtimer_setup() to simplify the code.
projects / thirdparty / linux.git / log
