Jiri Olsa [Fri, 5 Sep 2025 20:57:29 +0000 (22:57 +0200)]
uprobes/x86: Return error from uprobe syscall when not called from trampoline
Currently uprobe syscall handles all errors with forcing SIGILL to current
process. As suggested by Andrii it'd be helpful for uprobe syscall detection
to return error value for the !in_uprobe_trampoline check.
This way we could just call uprobe syscall and based on return value we will
find out if the kernel has it.
Steven Rostedt [Wed, 20 Aug 2025 18:03:41 +0000 (14:03 -0400)]
perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL
To determine if a task is a kernel thread or not, it is more reliable to
use (current->flags & (PF_KTHREAD|PF_USER_WORKERi)) than to rely on
current->mm being NULL. That is because some kernel tasks (io_uring
helpers) may have a mm field.
The 'init_nr' argument has double duty: it's used to initialize both the
number of contexts and the number of stack entries. That's confusing
and the callers always pass zero anyway. Hard code the zero.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Namhyung Kim <Namhyung@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20250820180428.259565081@kernel.org
Dapeng Mi [Wed, 20 Aug 2025 02:30:32 +0000 (10:30 +0800)]
perf/x86: Print PMU counters bitmap in x86_pmu_show_pmu_cap()
Along with the introduction Perfmon v6, pmu counters could be
incontinuous, like fixed counters on CWF, only fixed counters 0-3 and
5-7 are supported, there is no fixed counter 4 on CWF. To accommodate
this change, archPerfmonExt CPUID (0x23) leaves are introduced to
enumerate the true-view of counters bitmap.
Current perf code already supports archPerfmonExt CPUID and uses
counters-bitmap to enumerate HW really supported counters, but
x86_pmu_show_pmu_cap() still only dumps the absolute counter number
instead of true-view bitmap, it's out-dated and may mislead readers.
So dump counters true-view bitmap in x86_pmu_show_pmu_cap() and
opportunistically change the dump sequence and words.
Dapeng Mi [Wed, 20 Aug 2025 02:30:31 +0000 (10:30 +0800)]
perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK
ICL_FIXED_0_ADAPTIVE is missed to be added into INTEL_FIXED_BITS_MASK,
add it.
With help of this new INTEL_FIXED_BITS_MASK, intel_pmu_enable_fixed() can
be optimized. The old fixed counter control bits can be unconditionally
cleared with INTEL_FIXED_BITS_MASK and then set new control bits base on
new configuration.
Dapeng Mi [Wed, 20 Aug 2025 02:30:30 +0000 (10:30 +0800)]
perf/x86/intel: Change macro GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48)
Macro GLOBAL_CTRL_EN_PERF_METRICS is defined to 48 instead of
BIT_ULL(48), it's inconsistent with other similar macros. This leads to
this macro is quite easily used wrongly since users thinks it's a
bit-mask just like other similar macros.
Thus change GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48) and eliminate
this potential misuse.
Dapeng Mi [Wed, 20 Aug 2025 02:30:29 +0000 (10:30 +0800)]
perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag
IA32_PERF_CAPABILITIES.PEBS_TIMING_INFO[bit 17] is introduced to
indicate whether timed PEBS is supported. Timed PEBS adds a new "retired
latency" field in basic info group to show the timing info. Please find
detailed information about timed PEBS in section 8.4.1 "Timed Processor
Event Based Sampling" of "Intel Architecture Instruction Set Extensions
and Future Features".
This patch adds PERF_CAP_PEBS_TIMING_INFO flag and KVM module leverages
this flag to expose timed PEBS feature to guest.
Moreover, opportunistically refine the indents and make the macros
share consistent indents.
On PTL, GP counter 0 and 1 doesn't support auto counter reload feature,
thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR
which requires to enable auto counter reload on GP counter 0.
The root cause of causing this issue is the check for auto counter
reload (ACR) counter mask from user space is incorrect in
intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter
mask from user space could be set into hw.config1 and then written into
CFG_B MSRs and trigger the MSR access warning.
e.g., User may create a perf event with ACR counter mask (config2=0xcb),
and there is only 1 event created, so "cpuc->n_events" is 1.
The correct check condition should be "i + idx >= cpuc->n_events"
instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise,
the counter mask would traverse twice and an invalid "cpuc->assign[1]"
bit (bit 0) is set into hw.config1 and cause MSR accessing error.
Besides, also check if the ACR counter mask corresponding events are
ACR events. If not, filter out these counter mask. If a event is not a
ACR event, it could be scheduled to an HW counter which doesn't support
ACR. It's invalid to add their counter index in ACR counter mask.
Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as
user could set any invalid ACR counter mask and the warning message
could mislead users.
Fixes: ec980e4facef ("perf/x86/intel: Support auto counter reload") Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20250820023032.17128-3-dapeng1.mi@linux.intel.com
Dapeng Mi [Wed, 20 Aug 2025 02:30:26 +0000 (10:30 +0800)]
perf/x86/intel: Use early_initcall() to hook bts_init()
After the commit 'd971342d38bf ("perf/x86/intel: Decouple BTS
initialization from PEBS initialization")' is introduced, x86_pmu.bts
would initialized in bts_init() which is hooked by arch_initcall().
Whereas init_hw_perf_events() is hooked by early_initcall(). Once the
core PMU is initialized, nmi watchdog initialization is called
immediately before bts_init() is called. It leads to the BTS buffer is
not really initialized since bts_init() is not called and x86_pmu.bts is
still false at that time. Worse, BTS buffer would never be initialized
then unless all core PMU events are freed and reserve_ds_buffers()
is called again.
Thus aligning with init_hw_perf_events(), use early_initcall() to hook
bts_init() to ensure x86_pmu.bts is initialized before nmi watchdog
initialization.
Fixes: d971342d38bf ("perf/x86/intel: Decouple BTS initialization from PEBS initialization") Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20250820023032.17128-2-dapeng1.mi@linux.intel.com
Qianfeng Rong [Tue, 5 Aug 2025 02:50:00 +0000 (10:50 +0800)]
uprobes: Remove redundant __GFP_NOWARN
Commit 16f5dfbc851b ("gfp: include __GFP_NOWARN in GFP_NOWAIT")
made GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT
(e.g., `GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean
up these redundant flags across subsystems.
Jiri Olsa [Sun, 20 Jul 2025 11:21:30 +0000 (13:21 +0200)]
seccomp: passthrough uprobe systemcall without filtering
Adding uprobe as another exception to the seccomp filter alongside
with the uretprobe syscall.
Same as the uretprobe the uprobe syscall is installed by kernel as
replacement for the breakpoint exception and is limited to x86_64
arch and isn't expected to ever be supported in i386.
Jiri Olsa [Thu, 21 Aug 2025 14:15:57 +0000 (16:15 +0200)]
selftests/bpf: Fix uprobe syscall shadow stack test
Now that we have uprobe syscall working properly with shadow stack,
we can remove testing limitations for shadow stack tests and make
sure uprobe gets properly optimized.
Jiri Olsa [Sun, 20 Jul 2025 11:21:29 +0000 (13:21 +0200)]
selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe
Changing the test_uretprobe_regs_change test to test both uprobe
and uretprobe by adding entry consumer handler to the testmod
and making it to change one of the registers.
Making sure that changed values both uprobe and uretprobe handlers
propagate to the user space.
Peter Zijlstra [Thu, 21 Aug 2025 11:48:48 +0000 (13:48 +0200)]
uprobes/x86: Make asm style consistent
The asm syntax in uretprobe_trampoline and uprobe_trampoline differs
in the use of operand size suffixes. Make them consistent and remove
all size suffixes.
Peter Zijlstra [Wed, 20 Aug 2025 12:28:34 +0000 (14:28 +0200)]
uprobes/x86: Fix uprobe syscall vs shadow stack
The uprobe syscall stores and strips the trampoline stack frame from
the user context, to make it appear similar to an exception at the
original instruction. It then restores the trampoline stack when it
can exit using sysexit.
Make sure to match the regular stack manipulation with shadow stack
operations such that regular and shadow stack don't get out of sync
and causes trouble.
This enables using the optimization when shadow stack is in use.
Peter Zijlstra [Wed, 20 Aug 2025 10:55:14 +0000 (12:55 +0200)]
uprobes/x86: Accept more NOP forms
Instead of only accepting the x86_64 nop5 chosen by the kernel, accept
any x86_64 NOP or NOPL instruction that is 5 bytes.
Notably, the x86_64 nop5 pattern is valid in 32bit apps and could get
compiler generated when build for i686 (which introduced NOPL). Since
the trampoline is x86_64 only, make sure to limit to x86_64 code.
Jiri Olsa [Sun, 20 Jul 2025 11:21:20 +0000 (13:21 +0200)]
uprobes/x86: Add support to optimize uprobes
Putting together all the previously added pieces to support optimized
uprobes on top of 5-byte nop instruction.
The current uprobe execution goes through following:
- installs breakpoint instruction over original instruction
- exception handler hit and calls related uprobe consumers
- and either simulates original instruction or does out of line single step
execution of it
- returns to user space
The optimized uprobe path does following:
- checks the original instruction is 5-byte nop (plus other checks)
- adds (or uses existing) user space trampoline with uprobe syscall
- overwrites original instruction (5-byte nop) with call to user space
trampoline
- the user space trampoline executes uprobe syscall that calls related uprobe
consumers
- trampoline returns back to next instruction
This approach won't speed up all uprobes as it's limited to using nop5 as
original instruction, but we plan to use nop5 as USDT probe instruction
(which currently uses single byte nop) and speed up the USDT probes.
The arch_uprobe_optimize triggers the uprobe optimization and is called after
first uprobe hit. I originally had it called on uprobe installation but then
it clashed with elf loader, because the user space trampoline was added in a
place where loader might need to put elf segments, so I decided to do it after
first uprobe hit when loading is done.
The uprobe is un-optimized in arch specific set_orig_insn call.
The instruction overwrite is x86 arch specific and needs to go through 3 updates:
(on top of nop5 instruction)
- write int3 into 1st byte
- write last 4 bytes of the call instruction
- update the call instruction opcode
And cleanup goes though similar reverse stages:
- overwrite call opcode with breakpoint (int3)
- write last 4 bytes of the nop5 instruction
- write the nop5 first instruction byte
We do not unmap and release uprobe trampoline when it's no longer needed,
because there's no easy way to make sure none of the threads is still
inside the trampoline. But we do not waste memory, because there's just
single page for all the uprobe trampoline mappings.
We do waste frame on page mapping for every 4GB by keeping the uprobe
trampoline page mapped, but that seems ok.
We take the benefit from the fact that set_swbp and set_orig_insn are
called under mmap_write_lock(mm), so we can use the current instruction
as the state the uprobe is in - nop5/breakpoint/call trampoline -
and decide the needed action (optimize/un-optimize) based on that.
Attaching the speed up from benchs/run_bench_uprobes.sh script:
Jiri Olsa [Sun, 20 Jul 2025 11:21:19 +0000 (13:21 +0200)]
uprobes/x86: Add uprobe syscall to speed up uprobe
Adding new uprobe syscall that calls uprobe handlers for given
'breakpoint' address.
The idea is that the 'breakpoint' address calls the user space
trampoline which executes the uprobe syscall.
The syscall handler reads the return address of the initial call
to retrieve the original 'breakpoint' address. With this address
we find the related uprobe object and call its consumers.
Adding the arch_uprobe_trampoline_mapping function that provides
uprobe trampoline mapping. This mapping is backed with one global
page initialized at __init time and shared by the all the mapping
instances.
We do not allow to execute uprobe syscall if the caller is not
from uprobe trampoline mapping.
The uprobe syscall ensures the consumer (bpf program) sees registers
values in the state before the trampoline was called.
Jiri Olsa [Sun, 20 Jul 2025 11:21:18 +0000 (13:21 +0200)]
uprobes/x86: Add mapping for optimized uprobe trampolines
Adding support to add special mapping for user space trampoline with
following functions:
uprobe_trampoline_get - find or add uprobe_trampoline
uprobe_trampoline_put - remove or destroy uprobe_trampoline
The user space trampoline is exported as arch specific user space special
mapping through tramp_mapping, which is initialized in following changes
with new uprobe syscall.
The uprobe trampoline needs to be callable/reachable from the probed address,
so while searching for available address we use is_reachable_by_call function
to decide if the uprobe trampoline is callable from the probe address.
All uprobe_trampoline objects are stored in uprobes_state object and are
cleaned up when the process mm_struct goes down. Adding new arch hooks
for that, because this change is x86_64 specific.
Locking is provided by callers in following changes.
Jiri Olsa [Sun, 20 Jul 2025 11:21:17 +0000 (13:21 +0200)]
uprobes: Add do_ref_ctr argument to uprobe_write function
Making update_ref_ctr call in uprobe_write conditional based
on do_ref_ctr argument. This way we can use uprobe_write for
instruction update without doing ref_ctr_offset update.
Jiri Olsa [Sun, 20 Jul 2025 11:21:16 +0000 (13:21 +0200)]
uprobes: Add is_register argument to uprobe_write and uprobe_write_opcode
The uprobe_write has special path to restore the original page when we
write original instruction back. This happens when uprobe_write detects
that we want to write anything else but breakpoint instruction.
Moving the detection away and passing it to uprobe_write as argument,
so it's possible to write different instructions (other than just
breakpoint and rest).
Jiri Olsa [Sun, 20 Jul 2025 11:21:14 +0000 (13:21 +0200)]
uprobes: Add uprobe_write function
Adding uprobe_write function that does what uprobe_write_opcode did
so far, but allows to pass verify callback function that checks the
memory location before writing the opcode.
It will be used in following changes to implement specific checking
logic for instruction update.
The uprobe_write_opcode now calls uprobe_write with verify_opcode as
the verify callback.
Jiri Olsa [Sun, 20 Jul 2025 11:21:11 +0000 (13:21 +0200)]
uprobes: Remove breakpoint in unapply_uprobe under mmap_write_lock
Currently unapply_uprobe takes mmap_read_lock, but it might call
remove_breakpoint which eventually changes user pages.
Current code writes either breakpoint or original instruction, so it can
go away with read lock as explained in here [1]. But with the upcoming
change that writes multiple instructions on the probed address we need
to ensure that any update to mm's pages is exclusive.
Thomas Gleixner [Tue, 12 Aug 2025 10:39:13 +0000 (12:39 +0200)]
perf: Convert mmap() refcounts to refcount_t
The recently fixed reference count leaks could have been detected by using
refcount_t and refcount_t would have mitigated the potential overflow at
least.
Now that the code is properly structured, convert the mmap() related
mmap_count variants over to refcount_t.
Peter Zijlstra [Tue, 12 Aug 2025 10:39:12 +0000 (12:39 +0200)]
perf: Identify the 0->1 transition for event::mmap_count
Needed because refcount_inc() doesn't allow the 0->1 transition.
Specifically, this is the case where we've created the RB, this means
there was no RB, and as such there could not have been an mmap.
Additionally we hold mmap_mutex to serialize everything.
Peter Zijlstra [Tue, 12 Aug 2025 10:39:06 +0000 (12:39 +0200)]
perf: Use guard() for aux_mutex in perf_mmap()
After duplicating the common code into the rb/aux branches is it
possible to use a simple guard() for the aux_mutex. Making the aux
branch self-contained.
Peter Zijlstra [Tue, 12 Aug 2025 10:39:04 +0000 (12:39 +0200)]
perf: Move common code into both rb and aux branches
if (cond) {
A;
} else {
B;
}
C;
into
if (cond) {
A;
C;
} else {
B;
C;
}
Notably C has a success branch and both A and B have two places for
success. For A (rb case), duplicate the success case because later
patches will result in them no longer being identical. For B (aux
case), share using goto (cleaned up later).
Thomas Gleixner [Tue, 12 Aug 2025 10:39:00 +0000 (12:39 +0200)]
perf: Split out mlock limit handling
To prepare for splitting the buffer allocation out into separate functions
for the ring buffer and the AUX buffer, split out mlock limit handling into
a helper function, which can be called from both.
is redundant. Remove the vma_size check as nr_pages is what is actually
used in the allocation function. That prepares for splitting out the buffer
allocation into separate functions, so that only nr_pages needs to be
handed in.
Linus Torvalds [Sun, 10 Aug 2025 05:51:37 +0000 (08:51 +0300)]
Merge tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Remove an obsolete comment and fix spelling
* tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove obsolete comment from takedown_cpu()
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
Linus Torvalds [Sun, 10 Aug 2025 05:46:47 +0000 (08:46 +0300)]
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
Linus Torvalds [Sun, 10 Aug 2025 05:15:32 +0000 (08:15 +0300)]
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Len Brown [Sun, 10 Aug 2025 01:08:26 +0000 (21:08 -0400)]
tools/power turbostat: version 2025.09.09
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Wed, 11 Jun 2025 06:50:26 +0000 (14:50 +0800)]
tools/power turbostat: Fix DMR support
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59de2 ("tools/power turbostat: Add initial support for DMR") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: add format "average" for external attributes
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 12 Jul 2025 20:16:56 +0000 (16:16 -0400)]
tools/power turbostat: Support more than 64 built-in-counters
We have out-grown the ability to use a 64-bit memory location
to inventory every possible built-in counter.
Leverage the the CPU_SET(3) macros to break this barrier.
Also, break the Joules & Watts counters into two,
since we can no longer 'or' them together...
Linus Torvalds [Sat, 9 Aug 2025 15:12:23 +0000 (18:12 +0300)]
Merge tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fix from Greg KH:
"Here is a single revert of one of the previous patches that went in
the last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.)
It accidentially changed the ioctl values of some tty ioctls, which
breaks xorg.
The revert has been in linux-next all this week with no reported
issues"
* tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: vt: use _IO() to define ioctl numbers"
Linus Torvalds [Sat, 9 Aug 2025 05:47:28 +0000 (08:47 +0300)]
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
Linus Torvalds [Sat, 9 Aug 2025 05:45:08 +0000 (08:45 +0300)]
Merge tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Allow vectorized payloads for send/send-zc - like sendmsg, but
without the hassle of a msghdr.
- Fix for an integer wrap that should go to stable, spotted by syzbot.
Nothing alarming here, as you need to be root to hit this.
Nevertheless, it should get fixed.
FWIW, kudos to the syzbot crew for having much nicer reproducers now,
and with nicely annotated source code as well. This is particularly
useful as syzbot uses the raw interface rather than liburing,
historically it's been difficult to turn a syzbot reproducer into a
meaningful test case. With the recent changes, not true anymore!
* tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux:
io_uring/memmap: cast nr_pages to size_t before shifting
io_uring/net: Allow to do vectorized send
Linus Torvalds [Sat, 9 Aug 2025 05:43:24 +0000 (08:43 +0300)]
Merge tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's one fix here for an issue with the CS42L43 where we were
allocating a single property for client devices as just that property
rather than a terminated array of properties like we are supposed to.
We also have an update to the MAINTAINERS file for some Renesas
devices"
* tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Property entry should be a null-terminated array
MAINTAINERS: Add entries for the RZ/V2H(P) RSPI
Linus Torvalds [Sat, 9 Aug 2025 05:41:53 +0000 (08:41 +0300)]
Merge tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
Linus Torvalds [Sat, 9 Aug 2025 05:40:28 +0000 (08:40 +0300)]
Merge tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
Linus Torvalds [Sat, 9 Aug 2025 05:37:17 +0000 (08:37 +0300)]
Merge tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- aspeed: add driver and bindings for ast2700
- broadcom: add driver and bindings for bcm74110
- mediatek: fix RPM api usage
- qcom: use dev_fwnode
- pcc: support shared buffer
- misc dt-bindings cleanup
* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox/pcc: support mailbox management of the shared buffer
mailbox: bcm74110: Fix spelling mistake
mailbox: bcm74110: remove unneeded semicolon
mailbox: aspeed: add mailbox driver for AST27XX series SoC
dt-bindings: mailbox: Add ASPEED AST2700 series SoC
dt-bindings: mailbox: Drop consumers example DTS
dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
dt-bindings: mailbox: Correct example indentation
dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
mailbox: Add support for bcm74110
dt-bindings: mailbox: Add support for bcm74110
mailbox: Use dev_fwnode()
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
Linus Torvalds [Sat, 9 Aug 2025 05:15:43 +0000 (08:15 +0300)]
Merge tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
Linus Torvalds [Sat, 9 Aug 2025 05:12:41 +0000 (08:12 +0300)]
Merge tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio and
USB-audio drivers
* tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/ca0132: Fix missing error handling in ca0132_alt_select_out()
ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies
ALSA: hda/tas2781: Support L"SmartAmpCalibrationData" to save calibrated data
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
ALSA: hda/realtek: add LG gram 16Z90R-A to alc269 fixup table
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
ASoC: tas2781: Fix the wrong step for TLV on tas2781
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platform
ASoC: SOF: amd: Add sof audio support for acp7.2 platform
ASoC: Intel: avs: Fix uninitialized pointer error in probe()
ASoC: wm8962: Clear master mode when enter runtime suspend
ASoC: SOF: amd: acp-loader: Use GFP_KERNEL for DMA allocations in resume context
Linus Torvalds [Sat, 9 Aug 2025 04:58:55 +0000 (07:58 +0300)]
Merge tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
Linus Torvalds [Sat, 9 Aug 2025 04:35:03 +0000 (07:35 +0300)]
Merge tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa update from Max Filippov:
- replace __ASSEMBLY__ with __ASSEMBLER__ in arch headers
* tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
Linus Torvalds [Sat, 9 Aug 2025 04:26:19 +0000 (07:26 +0300)]
Merge tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that broke hmac(sha3-224-s390)"
* tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hash - Increase HASH_MAX_DESCSIZE for hmac(sha3-224-s390)
Linus Torvalds [Sat, 9 Aug 2025 04:20:44 +0000 (07:20 +0300)]
Merge tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- don't inherit NFS filesystem capabilities when crossing from one
filesystem to another
Bugfixes:
- NFS wakeup of __nfs_lookup_revalidate() needs memory barriers
- NFS improve bounds checking in nfs_fh_to_dentry()
- NFS Fix allocation errors when writing to a NFS file backed
loopback device
- NFSv4: More listxattr fixes
- SUNRPC: fix client handling of TLS alerts
- pNFS block/scsi layout fix for an uninitialised pointer
dereference
- pNFS block/scsi layout fixes for the extent encoding, stripe
mapping, and disk offset overflows
- pNFS layoutcommit work around for RPC size limitations
- pNFS/flexfiles avoid looping when handling fatal errors after
layoutget
- localio: fix various race conditions
Features and cleanups:
- Add NFSv4 support for retrieving the btime
- NFS: Allow folio migration for the case of mode == MIGRATE_SYNC
- NFS: Support using a kernel keyring to store TLS certificates
- NFSv4: Speed up delegation lookup using a hash table
- Assorted cleanups to remove unused variables and struct fields
- Assorted new tracepoints to improve debugging"
* tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (44 commits)
NFS/localio: nfs_uuid_put() fix the wake up after unlinking the file
NFS/localio: nfs_uuid_put() fix races with nfs_open/close_local_fh()
NFS/localio: nfs_close_local_fh() fix check for file closed
NFSv4: Remove duplicate lookups, capability probes and fsinfo calls
NFS: Fix the setting of capabilities when automounting a new filesystem
sunrpc: fix client side handling of tls alerts
nfs/localio: use read_seqbegin() rather than read_seqbegin_or_lock()
NFS: Fixup allocation flags for nfsiod's __GFP_NORETRY
NFSv4.2: another fix for listxattr
NFS: Fix filehandle bounds checking in nfs_fh_to_dentry()
SUNRPC: Silence warnings about parameters not being described
NFS: Clean up pnfs_put_layout_hdr()/pnfs_destroy_layout_final()
NFS: Fix wakeup of __nfs_lookup_revalidate() in unblock_revalidate()
NFS: use a hash table for delegation lookup
NFS: track active delegations per-server
NFS: move the delegation_watermark module parameter
NFS: cleanup nfs_inode_reclaim_delegation
NFS: cleanup error handling in nfs4_server_common_setup
pNFS/flexfiles: don't attempt pnfs on fatal DS errors
NFS: drop __exit from nfs_exit_keyring
...
Linus Torvalds [Sat, 9 Aug 2025 04:12:43 +0000 (07:12 +0300)]
Merge tag 'v6.17rc-part2-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
"Non-smbdirect:
- Fix null ptr deref caused by delay in global spinlock
initialization
- Two fixes for native symlink creation with SMB3.1.1 POSIX
Extensions
- Fix for socket special file creation with SMB3.1.1 POSIX Exensions
- Reduce lock contention by splitting out mid_counter_lock
- move SMB1 transport code to separate file to reduce module size
when support for legacy servers is disabled
- Two cleanup patches: rename mid_lock to make it clearer what it
protects and one to convert mid flags to bool to make clearer
Smbdirect/RDMA restructuring and fixes:
- Fix for error handling in send done
- Remove unneeded empty packet queue
- Fix put_receive_buffer error path
- Two fixes to recv_done error paths
- Remove unused variable
- Improve response and recvmsg type handling
- Fix handling of incoming message type
- Two cleanup fixes for better handling smbdirect recv io
- Two cleanup fixes for socket spinlock
- Two patches that add socket reassembly struct
- Remove unused connection_status enum
- Use flag in common header for SMBDIRECT_RECV_IO_MAX_SGE
- Two cleanup patches to introduce and use smbdirect send io
- Two cleanup patches to introduce and use smbdirect send_io struct
- Fix to return error if rdma connect takes longer than 5 seconds
- Error logging improvements
- Fix redundand call to init_waitqueue_head
- Remove unneeded wait queue"
* tag 'v6.17rc-part2-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (33 commits)
smb: client: only use a single wait_queue to monitor smbdirect connection status
smb: client: don't call init_waitqueue_head(&info->conn_wait) twice in _smbd_get_connection
smb: client: improve logging in smbd_conn_upcall()
smb: client: return an error if rdma_connect does not return within 5 seconds
smb: client: make use of smbdirect_socket.{send,recv}_io.mem.{cache,pool}
smb: smbdirect: add smbdirect_socket.{send,recv}_io.mem.{cache,pool}
smb: client: make use of struct smbdirect_send_io
smb: smbdirect: introduce struct smbdirect_send_io
smb: client: make use of SMBDIRECT_RECV_IO_MAX_SGE
smb: smbdirect: add SMBDIRECT_RECV_IO_MAX_SGE
smb: client: remove unused enum smbd_connection_status
smb: client: make use of smbdirect_socket.recv_io.reassembly.*
smb: smbdirect: introduce smbdirect_socket.recv_io.reassembly.*
smb: client: make use of smb: smbdirect_socket.recv_io.free.{list,lock}
smb: smbdirect: introduce smbdirect_socket.recv_io.free.{list,lock}
smb: client: make use of struct smbdirect_recv_io
smb: smbdirect: introduce struct smbdirect_recv_io
smb: client: make use of smbdirect_socket->recv_io.expected
smb: smbdirect: introduce smbdirect_socket.recv_io.expected
smb: client: remove unused smbd_connection->fragment_reassembly_remaining
...
Linus Torvalds [Sat, 9 Aug 2025 03:52:37 +0000 (06:52 +0300)]
Merge tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix limiting repeated connections from same IP
- Fix for extracting shortname when name begins with a dot
- Four smbdirect fixes:
- three fixes to the receive path: potential unmap bug, potential
resource leaks and stale connections, and also potential use
after free race
- cleanup to remove unneeded queue
* tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
smb: server: Fix extension string in ksmbd_extract_shortname()
ksmbd: limit repeated connections from clients with the same IP
smb: server: let recv_done() avoid touching data_transfer after cleanup/move
smb: server: let recv_done() consistently call put_recvmsg/smb_direct_disconnect_rdma_connection
smb: server: make sure we call ib_dma_unmap_single() only if we called ib_dma_map_single already
smb: server: remove separate empty_recvmsg_queue
Zhang Rui [Tue, 17 Jun 2025 12:48:59 +0000 (20:48 +0800)]
tools/power turbostat: Fix bogus SysWatt for forked program
Similar to delta_cpu(), delta_platform() is called in turbostat main
loop. This ensures accurate SysWatt readings in periodic monitoring mode
$ sudo turbostat -S -q --show power -i 1
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
60 61 6.21 1.13 0.16 0.00 0.00 0.00 13.07
58 61 6.00 1.07 0.18 0.00 0.00 0.00 12.75
58 61 5.74 1.05 0.17 0.00 0.00 0.00 12.22
58 60 6.27 1.11 0.24 0.00 0.00 0.00 13.55
However, delta_platform() is missing for forked program and causes bogus
SysWatt reporting,
$ sudo turbostat -S -q --show power sleep 1
1.004736 sec
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
57 58 6.05 1.02 0.16 0.00 0.00 0.00 0.03
Add missing delta_platform() for forked program.
Fixes: e5f687b89bc2 ("tools/power turbostat: Add RAPL psys as a built-in counter") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc().
Check for ENOSYS to recognize this case, and continue on to
attempt to access the requested MSRs (such as temperature).
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Len Brown <len.brown@intel.com>
Calvin Owens [Fri, 13 Jun 2025 16:54:23 +0000 (09:54 -0700)]
tools/power turbostat: Fix build with musl
turbostat.c: In function 'parse_int_file':
turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function)
5567 | char path[PATH_MAX];
| ^~~~~~~~
turbostat.c: In function 'probe_graphics':
turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function)
6787 | char path[PATH_MAX];
| ^~~~~~~~
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Jens Axboe [Fri, 8 Aug 2025 12:35:14 +0000 (06:35 -0600)]
io_uring/memmap: cast nr_pages to size_t before shifting
If the allocated size exceeds UINT_MAX, then it's necessary to cast
the mr->nr_pages value to size_t to prevent it from overflowing. In
practice this isn't much of a concern as the required memory size will
have been validated upfront, and accounted to the user. And > 4GB sizes
will be necessary to make the lack of a cast a problem, which greatly
exceeds normal user locked_vm settings that are generally in the kb to
mb range. However, if root is used, then accounting isn't done, and
then it's possible to hit this issue.
Adam Young [Tue, 15 Jul 2025 00:10:07 +0000 (20:10 -0400)]
mailbox/pcc: support mailbox management of the shared buffer
Define a new, optional, callback that allows the driver to
specify how the return data buffer is allocated. If that callback
is set, mailbox/pcc.c is now responsible for reading from and
writing to the PCC shared buffer.
This also allows for proper checks of the Commnand complete flag
between the PCC sender and receiver.
For Type 4 channels, initialize the command complete flag prior
to accepting messages.
Since the mailbox does not know what memory allocation scheme
to use for response messages, the client now has an optional
callback that allows it to allocate the buffer for a response
message.
When an outbound message is written to the buffer, the mailbox
checks for the flag indicating the client wants an tx complete
notification via IRQ. Upon receipt of the interrupt It will
pair it with the outgoing message. The expected use is to
free the kernel memory buffer for the previous outgoing message.
Signed-off-by: Adam Young <admiyo@os.amperecomputing.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Linus Torvalds [Fri, 8 Aug 2025 03:56:55 +0000 (06:56 +0300)]
Merge tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Support MMIO read/write tracing
- Enable THP swapping and THP migration
- Unmask SLCF bit ("stateless command filtering") introduced with CEX8
cards, so that user space applications like lszcrypt could evaluate
and list this feature
- Fix the value of high_memory variable, so it considers possible
tailing offline memory blocks
- Make vmem_pte_alloc() consistent and always allocate memory of
PAGE_SIZE for page tables. This ensures a page table occupies the
whole page, as the rest of the code assumes
- Fix kernel image end address in the decompressor debug output
- Fix a typo in debug_sprintf_format_fn() comment
* tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: Fix typo in debug_sprintf_format_fn() comment
s390/boot: Fix startup debugging log
s390/mm: Allocate page table with PAGE_SIZE granularity
s390/mm: Enable THP_SWAP and THP_MIGRATION
s390: Support CONFIG_TRACE_MMIO_ACCESS
s390/mm: Set high_memory at the end of the identity mapping
s390/ap: Unmask SLCF bit in card and queue ap functions sysfs
Linus Torvalds [Fri, 8 Aug 2025 03:48:14 +0000 (06:48 +0300)]
Merge tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the fixes that built up in the merge window, mostly amdgpu and
xe with one i915 display fix, seems like things are pretty good for
rc1.
i915:
- DP LPFS fixes
xe:
- SRIOV: PF fixes and removal of need of module param
- Fix driver unbind around Devcoredump
- Mark xe driver as BROKEN if kernel page size is not 4kB
* tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/amdgpu: add missing vram lost check for LEGACY RESET
drm/amdgpu/discovery: fix fw based ip discovery
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
amdgpu/amdgpu_discovery: increase timeout limit for IFWI init
drm/amdgpu: Update SDMA firmware version check for user queue support
drm/amdgpu: Add NULL check for asic_funcs
drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"
drm/amd/display: fix a Null pointer dereference vulnerability
drm/amd/display: Add primary plane to commits for correct VRR handling
drm/amdgpu: update mmhub 3.3 client id mappings
drm/amdgpu: update mmhub 3.0.1 client id mappings
drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job
drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.
drm/amd/display: Don't overwrite dce60_clk_mgr
drm/amdkfd: Fix checkpoint-restore on multi-xcc
drm/amd: Restore cached manual clock settings during resume
drm/amd: Restore cached power limit during resume
drm/amdgpu: Update external revid for GC v9.5.0
drm/amdgpu: Update supported modes for GC v9.5.0
Mark xe driver as BROKEN if kernel page size is not 4kB
...