* mips-tdep.c (mips_reg3_to_reg): Optimize storage.

gdb/
* NEWS: Add microMIPS support and "set mips compression",
"show mips compression" commands.
* mips-tdep.h (mips_isa): New enum.
(gdbarch_tdep): Add mips_isa.
(mips_pc_is_mips16): Update prototype.
(mips_pc_is_mips, mips_pc_is_micromips): New prototypes.
* mips-tdep.c (mips_compression_mips16): New variable.
(mips_compression_micromips): Likewise.
(mips_compression_strings): Likewise.
(mips_compression_string): Likewise.
(is_mips16_isa, is_micromips_isa): New functions.
(is_mips16_addr): Rename to...
(is_compact_addr): ... this.
(unmake_mips16_addr): Likewise to...
(unmake_compact_addr): ... this.
(make_mips16_addr): Likewise to...
(make_compact_addr): ... this.
(is_mips_addr, is_mips16_addr, is_micromips_addr): New
functions.
(mips_elf_make_msymbol_special): Handle microMIPS code.
(msymbol_is_special): Rename to...
(msymbol_is_mips16): ... this.
(mips_make_symbol_special, mips_pc_is_mips16): Update
accordingly.
(msymbol_is_mips, msymbol_is_micromips): New functions.
(mips16_to_32_reg): Rename to...
(mips_reg3_to_reg): ... this.
(mips_pc_is_mips, mips_pc_is_micromips): New functions.
(mips_pc_isa): Likewise.
(mips_read_pc, mips_unwind_pc, mips_write_pc): Handle microMIPS
code.
(mips_fetch_instruction): Pass return status instead of printing
an error message if requested.  Handle microMIPS code.  Bail out
on an invalid ISA.
(micromips_op): New macro.
(b0s4_imm, b0s5_imm, b0s5_reg, b0s7_imm, b0s10_imm): Likewise.
(b1s9_imm, b2s3_cc, b4s2_regl, b5s5_op, b5s5_reg): Likewise.
(b6s4_op, b7s3_reg): Likewise.
(b0s6_op, b0s11_op, b0s12_imm, b0s16_imm, b0s26_imm): Likewise.
(b6s10_ext, b11s5_reg, b12s4_op): Likewise.
(mips_insn_size): New function.
(mips32_next_pc): Update mips_fetch_instruction call.
(micromips_relative_offset7): New function.
(micromips_relative_offset10): Likewise.
(micromips_relative_offset16): Likewise.
(micromips_pc_insn_size): Likewise.
(micromips_bc1_pc): Likewise.
(micromips_next_pc): Likewise.
(unpack_mips16): Update mips_fetch_instruction call.
(extended_mips16_next_pc): Update according to change to
mips16_to_32_reg.
(mips_next_pc): Update mips_pc_is_mips16 call.  Handle microMIPS
code.
(mips16_scan_prologue): Update mips_fetch_instruction call.
Update according to change to mips16_to_32_reg.
(mips_insn16_frame_sniffer): Update mips_pc_is_mips16 call.
(mips_insn16_frame_base_sniffer): Likewise.
(micromips_decode_imm9): New function.
(micromips_scan_prologue): Likewise.
(mips_micro_frame_cache): Likewise.
(mips_micro_frame_this_id): Likewise.
(mips_micro_frame_prev_register): Likewise.
(mips_micro_frame_sniffer): Likewise.
(mips_micro_frame_unwind): New variable.
(mips_micro_frame_base_address): New function.
(mips_micro_frame_base): New variable.
(mips_micro_frame_base_sniffer): New function.
(mips32_scan_prologue): Update mips_fetch_instruction call.
(mips_insn32_frame_sniffer): Check for the standard MIPS ISA
rather than for MIPS16.
(mips_insn32_frame_base_sniffer): Likewise.
(mips_addr_bits_remove): Handle microMIPS code.
(deal_with_atomic_sequence): Rename to...
(mips_deal_with_atomic_sequence): ... this.  Update the type
of the variable used to hold an instruction.  Remove the ISA bit
check.  Update mips_fetch_instruction call.
(micromips_deal_with_atomic_sequence): New function.
(deal_with_atomic_sequence): Likewise.
(mips_about_to_return): Handle microMIPS code.  Update
mips_fetch_instruction call.
(heuristic_proc_start): Check for the standard MIPS ISA rather
than for MIPS16.  Update mips_pc_is_mips16 and
mips_fetch_instruction calls.  Handle microMIPS code.
(mips_push_dummy_code): Handle microMIPS code.
(mips_eabi_push_dummy_call): Likewise.
(mips_o32_return_value): Update mips_pc_is_mips16 call.
(mips_o64_push_dummy_call): Handle microMIPS code.
(mips_o64_return_value): Update mips_pc_is_mips16 call.
(is_delayed): Remove function.
(mips_single_step_through_delay): Replace the call to is_delayed
with mips32_instruction_has_delay_slot.  Correct MIPS16 handling.
Handle microMIPS code.
(mips_skip_prologue): Update mips_pc_is_mips16 call.  Handle
microMIPS code.
(mips32_in_function_epilogue_p): Update mips_fetch_instruction
call.
(micromips_in_function_epilogue_p): New function.
(mips16_in_function_epilogue_p): Update mips_fetch_instruction
call.
(mips_in_function_epilogue_p): Update mips_pc_is_mips16 call.
Handle microMIPS.
(gdb_print_insn_mips): Likewise.
(mips_breakpoint_from_pc): Likewise.
(mips_remote_breakpoint_from_pc): New function.
(mips32_instruction_has_delay_slot): Simplify making use of the
updated mips_fetch_instruction interface.
(micromips_instruction_has_delay_slot): New function.
(mips16_instruction_has_delay_slot): Simplify making use of the
updated mips_fetch_instruction interface.
(mips_adjust_breakpoint_address): Check for the standard MIPS
ISA rather than for MIPS16 ISA.  Update for unmake_compact_addr
calls.  Handle microMIPS code.
(mips_get_mips16_fn_stub_pc): Update mips_fetch_instruction call.
(mips_skip_trampoline_code): Handle microMIPS code.
(global_mips_compression): New function.
(mips_gdbarch_init): Handle the compressed ISA setting from ELF
file flags.  Register the microMIPS remote breakpoint handler
and heuristic frame unwinder.
(show_mips_compression): New function.
(_initialize_mips_tdep): Add the "set mips compression" and
"show mips compression" commands.

gdb/doc/
* gdb.texinfo (MIPS): Document "set mips compression" and "show
mips compression".
(MIPS Breakpoint Kinds): New subsubsection.

Fix typo.

* config/tc-dlx.c (s_proc): Don't use asprintf.

* gdb.texinfo (Architecture-Specific Protocol Details): Define
nodes for subsections.  Add @acronym mark-ups and adjust
formatting.

Don't make _DYNAMIC/_GLOBAL_OFFSET_TABLE_ absolute

bfd/

* elf32-i386.c (elf_i386_finish_dynamic_symbol): Don't make
_DYNAMIC nor _GLOBAL_OFFSET_TABLE_ absolute.
* elf64-x86-64.c (elf_x86_64_finish_dynamic_symbol): Likewise.

ld/testsuite/

* ld-i386/tlsdesc-nacl.rd: Update for dynamic sym changes.
* ld-i386/tlsdesc.rd: Likewise.
* ld-i386/tlsgdesc-nacl.rd: Likewise.
* ld-i386/tlsgdesc.rd: Likewise.
* ld-i386/tlsnopic-nacl.rd: Likewise.
* ld-i386/tlsnopic.rd: Likewise.
* ld-i386/tlspic-nacl.rd: Likewise.
* ld-i386/tlspic.rd: Likewise.
* ld-x86-64/tlsdesc-nacl.rd: Likewise.
* ld-x86-64/tlsdesc.rd: Likewise.
* ld-x86-64/tlsgdesc-nacl.rd: Likewise.
* ld-x86-64/tlsgdesc.rd: Likewise.
* ld-x86-64/tlspic-nacl.rd: Likewise.
* ld-x86-64/tlspic.rd: Likewise.

2012-05-18  Sergio Durigan Junior  <sergiodj@redhat.com>

* ada-lang.c:
* ada-tasks.c:
* ada-varobj.c:
* amd64-darwin-tdep.c:
* arm-symbian-tdep.c:
* arm-tdep.c:
* avr-tdep.c:
* ax-gdb.c:
* bfin-linux-tdep.c:
* breakpoint.c:
* c-valprint.c:
* cli/cli-cmds.c:
* coffread.c:
* cp-support.c:
* cris-tdep.c:
* dwarf2-frame-tailcall.c:
* dwarf2-frame.c:
* dwarf2expr.c:
* dwarf2loc.c:
* dwarf2read.c:
* elfread.c:
* eval.c:
* expprint.c:
* f-valprint.c:
* frv-tdep.c:
* h8300-tdep.c:
* hppa-hpux-tdep.c:
* hppa-tdep.c:
* hppanbsd-tdep.c:
* i386-nto-tdep.c:
* i386-tdep.c:
* i387-tdep.c:
* ia64-tdep.c:
* jit.c:
* linespec.c:
* linux-tdep.c:
* lm32-tdep.c:
* m2-valprint.c:
* m32c-tdep.c:
* m32r-rom.c:
* m32r-tdep.c:
* m68k-tdep.c:
* m68klinux-tdep.c:
* mi/mi-main.c:
* microblaze-tdep.c:
* mips-linux-tdep.c:
* mips-tdep.c:
* mn10300-tdep.c:
* p-valprint.c:
* parse.c:
* ppc-linux-tdep.c:
* ppc-sysv-tdep.c:
* printcmd.c:
* python/py-finishbreakpoint.c:
* python/py-inferior.c:
* python/py-infthread.c:
* python/py-type.c:
* python/python.c:
* remote-fileio.c:
* remote-m32r-sdi.c:
* remote-mips.c:
* reverse.c:
* rl78-tdep.c:
* rs6000-aix-tdep.c:
* rs6000-tdep.c:
* s390-tdep.c:
* score-tdep.c:
* sh64-tdep.c:
* skip.c:
* solib-darwin.c:
* solib-dsbt.c:
* solib-frv.c:
* sparc-tdep.c:
* spu-multiarch.c:
* spu-tdep.c:
* stack.c:
* symfile.c:
* symtab.c:
* tic6x-tdep.c:
* tracepoint.c:
* v850-tdep.c:
* valarith.c:
* valprint.c:
* value.c:
* xcoffread.c:
* xtensa-tdep.c:
* ada-lang.c:
* ada-tasks.c:
* ada-varobj.c:
* amd64-darwin-tdep.c:
* arm-symbian-tdep.c:
* arm-tdep.c: Delete unused variables.

gdb/testsuite/
Fix ERROR: internal buffer is full.
* gdb.base/info-os.exp (expect_multiline): New function.
(get process list, get process groups, get threads)
(get file descriptors, get internet-domain sockets)
(get shared-memory regions, get semaphores, get message queues): Use
it for these tests.

gdb/
Rename $ddir to $datadir.
* NEWS (--with-auto-load-dir): Rename $ddir to $datadir.
* auto-load.c (auto_load_safe_path_vec_update)
(auto_load_gdb_datadir_changed, auto_load_objfile_script): Likewise.
* configure: Regenerate.
* configure.ac (--with-auto-load-dir, --with-auto-load-safe-path):
Likewise.  Remove the 'use $ddir' help string.

gdb/doc/
Rename $ddir to $datadir.
* gdb.texinfo (Auto-loading, Auto-loading safe path)
(objfile-gdb.py file): Rename $ddir to $datadir.

gdb/
* auto-load.c (show_auto_load_safe_path): Accept any combination of
DIRNAME_SEPARATOR and IS_DIR_SEPARATOR for wild-match.

* archive.c (_bfd_generic_read_ar_hdr_mag): Fix last change so as
not to clobber the ar_fmag field stored in ARED->arch_header.

PR exp/13907:
* valprint.h (struct value_print_options) <symbol_print>: New
field.
* valprint.c (user_print_options): Add default for symbol_print.
(show_symbol_print): New function.
(generic_val_print): Respect symbol_print.
(_initialize_valprint): Add "print symbol" setting.
* f-valprint.c (f_val_print): Respect symbol_print.
* c-valprint.c (c_val_print): Respect symbol_print.
* NEWS: Update.
* printcmd.c (print_address_symbolic): Return int.  Ignore some
zero-size symbols.
(print_address_demangle): Return int.
* defs.h: (print_address_symbolic): Return int.
* value.h (print_address_demangle): Return int.
doc
* gdb.texinfo (Print Settings): Document 'set print symbol'.
testsuite
* gdb.mi/mi-var-cmd.exp: Update.
* gdb.objc/basicclass.exp (do_objc_tests): Update.
* gdb.cp/virtbase.exp: Update.
* gdb.cp/classes.exp (test_static_members): Update.
* gdb.cp/casts.exp: Update.
* gdb.base/pointers.exp: Update.
* gdb.base/funcargs.exp (pointer_args): Update.
(structs_by_reference): Update.
* gdb.base/find.exp: Update.
* gdb.base/call-strs.exp: Send "set print symbol off".
* gdb.base/call-ar-st.exp: Update.
* gdb.ada/fun_addr.exp: Update.
* gdb.base/printcmds.exp (test_print_symbol): New proc.
Call it.
(test_print_repeats_10, test_print_strings)
(test_print_char_arrays): Update.

* valprint.c (val_print_string): Don't print leading space.
* p-valprint.c (pascal_val_print) <TYPE_CODE_PTR>: Optionally
print space before string or vtbl.
* m2-valprint.c (print_unpacked_pointer): Optionally print space
before string.
* jv-valprint.c (java_value_print): Print space before string.
* go-valprint.c (print_go_string): Print space before string.
* f-valprint.c (f_val_print) <TYPE_CODE_PTR>: Optionally print
space before string.
* c-valprint.c (c_val_print) <TYPE_CODE_PTR>: Optionally print
space before string or vtbl.
* auxv.c (fprint_target_auxv): Print space after address.

* printcmd.c (print_address_demangle): Remove special case for 0.
testsuite
* gdb.mi/mi2-var-display.exp: Update.
* gdb.mi/mi-var-display.exp: Update.
* gdb.mi/mi-var-child.exp: Update.
* gdb.cp/expand-psymtabs-cxx.exp: Update.
* gdb.cp/cp-relocate.exp (get_func_address): Update.

* printcmd.c (print_address_demangle): Add 'opts' argument.
* p-valprint.c (pascal_val_print): Update.
* jv-valprint.c (java_val_print): Update.
* value.h: Update.
* valprint.c (generic_val_print): Update.
(print_function_pointer_address): Add 'options' argument.  Remove
'addressprint' argument.  Update.
* m2-valprint.c (print_unpacked_pointer): Update.
* gnu-v3-abi.c (print_one_vtable): Update.
(gnuv3_print_method_ptr): Update.
* f-valprint.c (f_val_print): Update.
* cp-valprint.c (cp_print_value_fields): Update.
* valprint.h (print_function_pointer_address): Update.
* c-valprint.c (c_val_print): Update.

2012-05-18  Pedro Alves  <palves@redhat.com>

* mach-o.h: Don't include sysdep.h.

* psymtab.c (find_pc_sect_symtab_from_partial): Return the symtab
directly corresponding to the found psymtab.
* dwarf2read.c (recursively_find_pc_sect_symtab): New function.
(dw2_find_pc_sect_symtab): Use it.
* block.h (blockvector_contains_pc): Declare.
* block.c (find_block_in_blockvector): New function.
(blockvector_for_pc_sect): Use it.
(blockvector_contains_pc): New function.

* mips-tdep.h (mips_write_pc): New prototype.
* mips-tdep.c (mips_write_pc): Make external, add description.
* mips-linux-tdep.c (mips_linux_write_pc): Use mips_write_pc,
add description.

* mips-tdep.c (mips_read_pc): Use gdbarch_pc_regnum instead of
mips_regnum->pc.
(mips_unwind_pc, mips_write_pc): Likewise.
(mips_gdbarch_init): Remove a comment on gdbarch_pc_regnum and
gdbarch_read_pc.

PR 14072
* bfd-in.h: Check for PACKAGE or PACKAGE_VERSION before
complaining about config.h not having been included.
* bfd-in2.h: Regenerate.

* ld-tic6x/mvk-reloc-local-r.d: Adjust for signed addend.
* ld-tic6x/unwind-6.d: Typo fix.

* config/tc-dlx.c (s_proc): Avoid warning about ignoring asprintf
return value.

* config/tc-ppc.c: Don't capitalise error and warning messages.
(md_parse_option): Add checks for -a32 -mvle.

* config/obj-evax.c: Include as.h first.

* ia64-opc.c: Remove #include "ansidecl.h".
* z8kgen.c: Include sysdep.h first.

* ld-elf/init-mixed.c: Include config.h first.

* arc-dis.c: Include sysdep.h first, remove some redundant includes.
* bfin-dis.c: Likewise.
* i860-dis.c: Likewise.
* ia64-dis.c: Likewise.
* ia64-gen.c: Likewise.
* m68hc11-dis.c: Likewise.
* mmix-dis.c: Likewise.
* msp430-dis.c: Likewise.
* or32-dis.c: Likewise.
* rl78-dis.c: Likewise.
* rx-dis.c: Likewise.
* tic4x-dis.c: Likewise.
* tilegx-opc.c: Likewise.
* tilepro-opc.c: Likewise.
* rx-decode.c: Regenerate.

* ppc-opc.c (powerpc_macros): Add entries for e_extlwi to e_clrlslwi.

* ppc-opc.c (extract_sprg): Use ALLOW8_SPRG to include VLE.

* info-macros.exp: Pass "debug" to prepare_for_testing.

daily update

*** empty log message ***

bfd/
* aclocal.m4: Regenerate.
* Makefile.in: Regenerate.

binutils/
* aclocal.m4: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.

gas/
* aclocal.m4: Regenerate.
* configure: Regenerate.
* Makefile.in: Regenerate.

* Makefile.in (clean): Remove Fission .dwo and .dwp files.
* gdb.ada/Makefile.in (clean): Ditto.
* gdb.arch/Makefile.in (clean): Ditto.
* gdb.asm/Makefile.in (clean): Ditto.
* gdb.base/Makefile.in (clean): Ditto.
* gdb.cell/Makefile.in (clean): Ditto.
* gdb.cp/Makefile.in (clean): Ditto.
* gdb.disasm/Makefile.in (clean): Ditto.
* gdb.dwarf2/Makefile.in (clean): Ditto.
* gdb.fortran/Makefile.in (clean): Ditto.
* gdb.go/Makefile.in (clean): Ditto.
* gdb.hp/Makefile.in (clean): Ditto.
* gdb.hp/gdb.aCC/Makefile.in (clean): Ditto.
* gdb.hp/gdb.base-hp/Makefile.in (clean): Ditto.
* gdb.hp/gdb.compat/Makefile.in (clean): Ditto.
* gdb.hp/gdb.defects/Makefile.in (clean): Ditto.
* gdb.hp/gdb.objdbg/Makefile.in (clean): Ditto.
* gdb.java/Makefile.in (clean): Ditto.
* gdb.linespec/Makefile.in (clean): Ditto.
* gdb.mi/Makefile.in (clean): Ditto.
* gdb.modula2/Makefile.in (clean): Ditto.
* gdb.multi/Makefile.in (clean): Ditto.
* gdb.objc/Makefile.in (clean): Ditto.
* gdb.opencl/Makefile.in (clean): Ditto.
* gdb.opt/Makefile.in (clean): Ditto.
* gdb.pascal/Makefile.in (clean): Ditto.
* gdb.python/Makefile.in (clean): Ditto.
* gdb.reverse/Makefile.in (clean): Ditto.
* gdb.server/Makefile.in (clean): Ditto.
* gdb.stabs/Makefile.in (clean): Ditto.
* gdb.threads/Makefile.in (clean): Ditto.
* gdb.trace/Makefile.in (clean): Ditto.
* gdb.xml/Makefile.in (clean): Ditto.

procfs.c: Remove unused functions and make many functions static

gdb/ChangeLog:

        * procfs.c (procfs_find_new_threads, procfs_pid_to_str,
        proc_warn, proc_error, proc_get_status, proc_flags,
        proc_why, proc_what, proc_nsysarg, proc_sysargs,
        proc_set_run_on_last_close, proc_unset_run_on_last_close,
        proc_unset_inherit_on_fork, proc_set_async, proc_unset_async,
        proc_stop_process, proc_wait_for_stop, proc_run_process,
        proc_set_traced_signals, proc_set_traced_faults,
        proc_set_traced_sysentry, proc_set_traced_sysexit,
        proc_set_held_signals, proc_get_held_signals,
        proc_get_traced_signals, proc_get_traced_faults,
        proc_get_traced_sysentry, proc_get_traced_sysexit,
        proc_clear_current_fault, proc_set_current_signal,
        proc_clear_current_signal, proc_get_gregs, proc_get_fpregs,
        proc_set_gregs, proc_set_fpregs, proc_kill, proc_parent_pid,
        proc_get_nthreads, proc_get_nthreads, proc_get_nthreads,
        proc_get_current_thread, proc_get_current_thread,
        proc_get_current_thread, proc_update_threads,
        proc_update_threads, proc_update_threads, proc_update_threads,
        proc_iterate_over_threads, procfs_find_new_threads,
        procfs_pid_to_str): Make static.  Remove advance declaration.
        (proc_cursig): Make static.  Conditionalized defintion on
        PROCFS_DONT_PIOCSSIG_CURSIG being defined.
        (proc_syscall, proc_set_kill_on_last_close,
        proc_unset_kill_on_last_close, proc_set_inherit_on_fork,
        proc_get_pending_signals, proc_get_signal_actions,
        proc_trace_signal, proc_ignore_signal): Delete.

Expect addend as signed

binutils/testsuite/

* binutils-all/hppa/objdump.exp: Expect addend as signed.

gas/testsuite/

* gas/all/weakref1.d: Expect addend as signed.
* gas/arm/pic_vxworks.d: Likewise.
* gas/arm/wince.d: Likewise.
* gas/h8300/h8300.exp: Likewise.
* gas/i386/sub.d: Likewise.
* gas/mips/ecoff@ld.d: Likewise.
* gas/mips/ecoff@sd.d: Likewise.
* gas/mips/l_d-n32.d: Likewise.
* gas/mips/l_d-n64.d: Likewise.
* gas/mips/l_d.d: Likewise.
* gas/mips/ld-n32.d: Likewise.
* gas/mips/ld-n64.d: Likewise.
* gas/mips/ld.d: Likewise.
* gas/mips/mips1@l_d.d: Likewise.
* gas/mips/mips1@ld-forward.d: Likewise.
* gas/mips/mips1@ld.d: Likewise.
* gas/mips/mips1@s_d.d: Likewise.
* gas/mips/s_d-n32.d: Likewise.
* gas/mips/s_d-n64.d: Likewise.
* gas/mips/s_d.d: Likewise.
* gas/mips/sd-n32.d: Likewise.
* gas/mips/sd-n64.d: Likewise.
* gas/mips/sd.d: Likewise.
* gas/mmix/bz-c.d: Likewise.
* gas/mmix/geta-c.d: Likewise.
* gas/mmix/jump-c.d: Likewise.
* gas/mmix/pushj-c.d: Likewise.
* gas/mmix/pushj-cs.d: Likewise.
* gas/mmix/reloc16-n.d: Likewise.
* gas/mmix/reloc16-r.d: Likewise.
* gas/mmix/reloc16.d: Likewise.
* gas/mmix/reloc8-r.d: Likewise.
* gas/mmix/reloc8.d: Likewise.
* gas/mmix/relocxrn.d: Likewise.
* gas/sh/sh64/case-1.d: Likewise.
* gas/sh/sh64/mix-1.d: Likewise.
* gas/sh/sh64/pt32-1.d: Likewise.
* gas/sh/sh64/pt64-1.d: Likewise.
* gas/sh/sh64/pt64-32-2.d: Likewise.
* gas/sh/sh64/rel32-2.d: Likewise.
* gas/sh/sh64/rel32-4.d: Likewise.
* gas/sh/sh64/rel64-2.d: Likewise.
* gas/sh/sh64/rel64-4.d: Likewise.
* gas/tic6x/data-reloc.d: Likewise.
* gas/tic6x/pcr-relocs.d: Likewise.
* gas/xstormy16/allinsn.d: Likewise.
* gas/xstormy16/reloc-1.d: Likewise.
* gas/xstormy16/reloc-2.d: Likewise.

ld/testsuite/

* ld-arm/emit-relocs1-vxworks.d: Expect addend as signed.
* ld-spu/pic.d: Likewise.

PR 14072
* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.
* alpha-opc.c: Include sysdep.h before any other header file.
* alpha-dis.c: Likewise.
* avr-dis.c: Likewise.
* cgen-opc.c: Likewise.
* cr16-dis.c: Likewise.
* cris-dis.c: Likewise.
* crx-dis.c: Likewise.
* d10v-dis.c: Likewise.
* d10v-opc.c: Likewise.
* d30v-dis.c: Likewise.
* d30v-opc.c: Likewise.
* h8500-dis.c: Likewise.
* i370-dis.c: Likewise.
* i370-opc.c: Likewise.
* m10200-dis.c: Likewise.
* m10300-dis.c: Likewise.
* micromips-opc.c: Likewise.
* mips-opc.c: Likewise.
* mips61-opc.c: Likewise.
* moxie-dis.c: Likewise.
* or32-opc.c: Likewise.
* pj-dis.c: Likewise.
* ppc-dis.c: Likewise.
* ppc-opc.c: Likewise.
* s390-dis.c: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Likewise.
* sparc-dis.c: Likewise.
* sparc-opc.c: Likewise.
* spu-dis.c: Likewise.
* tic30-dis.c: Likewise.
* tic54x-dis.c: Likewise.
* tic80-dis.c: Likewise.
* tic80-opc.c: Likewise.
* tilegx-dis.c: Likewise.
* tilepro-dis.c: Likewise.
* v850-dis.c: Likewise.
* v850-opc.c: Likewise.
* vax-dis.c: Likewise.
* w65-dis.c: Likewise.
* xgate-dis.c: Likewise.
* xtensa-dis.c: Likewise.
* rl78-decode.opc: Likewise.
* rl78-decode.c: Regenerate.
* rx-decode.opc: Likewise.
* rx-decode.c: Regenerate.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: Generate an error if included before config.h.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* bfd-in.h: Generate an error if included before config.h.
* sysdep.h: Likewise.
* bfd-in2.h: Regenerate.
* compress.c: Remove #include "config.h".
* plugin.c: Likewise.
* elf32-m68hc1x.c: Include sysdep.h before alloca-conf.h.
* elf64-hppa.c: Likewise.
* som.c: Likewise.
* xsymc.c: Likewise.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* aclocal.m4: Regenerate.
* Makefile.am: Use wrappers around C files generated by flex.
* Makefile.in: Regenerate.
* doc/Makefile.in: Regenerate.
* itbl-lex-wrapper.c: New file.
* config/bfin-lex-wrapper.c: New file.
* cgen.c: Include as.h before setjmp.h.
* config/tc-dlx.c: Include as.h before any other header.
* config/tc-h8300.c: Likewise.
* config/tc-lm32.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-microblaze.c: Likewise.
* config/tc-mmix.c: Likewise.
* config/tc-msp430.c: Likewise.
* config/tc-or32.c: Likewise.
* config/tc-tic4x.c: Likewise.
* config/tc-tic54x.c: Likewise.
* config/tc-xtensa.c: Likewise.

* configure.in: Add check that sysdep.h has been included before
any system header files.
* configure: Regenerate.
* config.in: Regenerate.
* unwind-ia64.h: Include config.h.

* lib/ld-lib.exp (run_dump_test): For options "warning" and
"error", append to earlier option values without adding a space.

typo fixes

binutils/
* dwarf.c (process_debug_info): Display abbrev offset in hex.
(display_debug_abbrev): Show offset of abbrev.

binutils/testsuite/
* binutils-all/objdump.W: Update.
* binutils-all/readelf.wa: Update.
* binutils-all/i386/compressed-1a.d: Update.
* binutils-all/x86-64/compressed-1a.d: Update.

gas/testsuite/
* gas/elf/dwarf2-1.d: Update.
* gas/elf/dwarf2-2.d: Update.
* gas/i386/dw2-compress-1.d: Update.

* dwarf.c (display_debug_ranges): Don't report more than one use
of the same range set as an overlap.

* gas/ppc/vle.d: Pass -a32 to assembler.
* gas/ppc/vle-reloc.d: Likewise.
* gas/ppc/vle-simple-1.d: Likewise, also match wider addresses.
* gas/ppc/vle-simple-2.d: Likewise.
* gas/ppc/vle-simple-3.d: Likewise.
* gas/ppc/vle-simple-4.d: Likewise.
* gas/ppc/vle-simple-5.d: Likewise.
* gas/ppc/vle-simple-6.d: Likewise.

* elf.c (ignore_section_sym): Correct comment.  Don't return
true for absolute section.
(elf_map_symbols): Move stray comment.  Adjust for above change.
Don't discard global section symbols.

* ld-m68k/tls-ld-1.d: Update.

bfd/
* elf32-ppc.c (ppc_elf_finish_dynamic_symbol): Don't make _DYNAMIC,
_GLOBAL_OFFSET_TABLE_ or _PROCEDURE_LINKAGE_TABLE_ absolute.
* elf64-ppc.c (ppc64_elf_finish_dynamic_symbol): Don't make _DYNAMIC
absolute.
ld/testsuite/
* ld-powerpc/tlsso.r: Update for dynamic sym changes.
* ld-powerpc/tlsso32.d: Likewise.
* ld-powerpc/tlsso32.r: Likewise.
* ld-powerpc/tlstocso.r: Likewise.

bfd/
* elf32-ppc.c (has_tls_reloc, has_tls_get_addr_call, has_vle_insns,
is_ppc_vle): Move to..
* elf32-ppc.h: ..here, making is_ppc_vle a macro.
opcodes/
* ppc_dis.c: Don't include elf/ppc.h.

*** empty log message ***

daily update

2012-05-16  Sergio Durigan Junior  <sergiodj@redhat.com>

* coffread.c (cs_section_address): Passing proper argument for
`bfd_get_section_vma'.
* dwarf2read.c (dwarf2_locate_sections): Likewise, for
`bfd_get_section_flags'.
* remote.c (remote_trace_set_readonly_regions): Likewise, for
`bfd_get_section_vma'.

PR macros/13205:
* macrotab.h: (macro_define_special): Declare.
(enum macro_special_kind): New.
(struct macro_definition) <argc, replacement>: Update comments.
* macrotab.c (new_macro_definition): Unconditionally set 'argc'.
(macro_define_object_internal): New function.
(macro_define_object): Use it.
(macro_define_special): New function.
(fixup_definition): New function.
(macro_lookup_definition, foreach_macro_in_scope)
(foreach_macro): Use fixup_definition.
* macroexp.h (macro_stringify): Declare.
* macroexp.c (free_buffer_return_text): New function.
(stringify): Constify "arg".
(macro_stringify): New function.
* dwarf2read.c (macro_start_file): Call macro_define_special.
testsuite
* gdb.base/macscp1.c (macscp_expr): Add comment.
* gdb.base/macscp.exp: Test __FILE__ and __LINE__.

* ld-arm/gc-hidden-1.d: Fix disassembly pattern.

Fix one of my ChangeLog entries.

I copy/pasted the wrong text... This fixes it.

* bfd-in.h (bfd_get_section_name, bfd_get_section_vma,
bfd_get_section_lma, bfd_get_section_alignment,
bfd_get_section_flags, bfd_get_section_userdata): Rewrite macros
in order to use the `bfd' argument.
* bfd-in2.h: Regenerate.
* elf-vxworks.c (elf_vxworks_finish_dynamic_entry): Pass proper `bfd'
as the first argument for `bfd_get_section_alignment'.
* elf32-arm.c (create_ifunc_sections): Likewise, for
`bfd_set_section_alignment'.
* elf32-m32r.c (m32r_elf_relocate_section): Likewise, for
`bfd_get_section_name'.
* elf32-microblaze.c (microblaze_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf64-mmix.c (mmix_final_link_relocate): Likewise, for
`bfd_get_section_vma'.
* elf64-ppc.c (create_linkage_sections): Likewise, for
`bfd_set_section_alignment'.

* emultempl/m68hc1xelf.em (hook_in_stub): Pass proper `bfd'
as the first argument for `bfd_get_section_name'.

* config/tc-alpha.c (maybe_set_gp): Pass proper `bfd'
as the first argument for `bfd_get_section_vma'.

PR gas/14082
* app.c (do_scrub_chars): Prevent possible out of bounds access to
lex[] array.

PR 13503
* reloc.c: Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Rename R_AVR_8_HHI8 to
R_AVR_8_HLO8.
(avr_reloc_map): Ditto.

* config/tc-avr.c (avr_cons_fix_new): Rename R_AVR_8_HHI8 to
R_AVR_8_HLO8.
(exp_mod_data) Ditto. And replace "hhi8" with "hlo8".
(md_apply_fix): Rename BFD_RELOC_AVR_8_HHI to BFD_RELOC_AVR_8_HLO.

* avr.h (RELOC_NUMBERS): Rename R_AVR_8_HHI8 to R_AVR_8_HLO8.

gdb/
* breakpoint.h (bp_location): Add related_address member.
* inferior.h (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
* value.h (using_struct_return): Likewise.
* gdbarch.sh (return_value): Take a pointer to struct value
instead of struct type for the function requested.
* breakpoint.c (set_breakpoint_location_function): Initialize
related_address for bp_gnu_ifunc_resolver breakpoints.
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the
requested function's address to gdbarch_return_value.
* eval.c (evaluate_subexp_standard): Pass the requested
function's address to using_struct_return.
* infcall.c (call_function_by_hand): Pass the requested
function's address to using_struct_return and
gdbarch_return_value.
* infcmd.c (get_return_value): Take a pointer to struct value
instead of struct type for the function requested.
(print_return_value): Update accordingly.
(finish_command_continuation): Likewise.
* stack.c (return_command): Pass the requested function's
address to using_struct_return and gdbarch_return_value.
* value.c (using_struct_return): Take a pointer to struct value
instead of struct type for the function requested.  Pass the
requested function's address to gdbarch_return_value.
* python/py-finishbreakpoint.c (finish_breakpoint_object):
New function_value member, replacing function_type.
(bpfinishpy_dealloc): Update accordingly.
(bpfinishpy_pre_stop_hook): Likewise.
(bpfinishpy_init): Likewise.  Record the requested function's
address.
* mips-tdep.c (mips_fval_reg): New enum.
(mips_o32_push_dummy_call): For MIPS16 FP doubles do not swap
words put in GP registers.
(mips_o64_push_dummy_call): Update a comment.
(mips_o32_return_value): Take a pointer to struct value instead
of struct type for the function requested and use it to check if
using the MIPS16 calling convention.  Return the designated
general purpose registers for floating-point values returned in
MIPS16 mode.
(mips_o64_return_value): Likewise.
* ppc-tdep.h (ppc_sysv_abi_return_value): Update prototype.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* alpha-tdep.c (alpha_return_value): Take a pointer to struct
value instead of struct type for the function requested.
* amd64-tdep.c (amd64_return_value): Likewise.
* amd64-windows-tdep.c (amd64_windows_return_value): Likewise.
* arm-tdep.c (arm_return_value): Likewise.
* avr-tdep.c (avr_return_value): Likewise.
* bfin-tdep.c (bfin_return_value): Likewise.
* cris-tdep.c (cris_return_value): Likewise.
* frv-tdep.c (frv_return_value): Likewise.
* h8300-tdep.c (h8300_return_value): Likewise.
(h8300h_return_value): Likewise.
* hppa-tdep.c (hppa32_return_value): Likewise.
(hppa64_return_value): Likewise.
* i386-tdep.c (i386_return_value): Likewise.
* ia64-tdep.c (ia64_return_value): Likewise.
* iq2000-tdep.c (iq2000_return_value): Likewise.
* lm32-tdep.c (lm32_return_value): Likewise.
* m32c-tdep.c (m32c_return_value): Likewise.
* m32r-tdep.c (m32r_return_value): Likewise.
* m68hc11-tdep.c (m68hc11_return_value): Likewise.
* m68k-tdep.c (m68k_return_value): Likewise.
(m68k_svr4_return_value): Likewise.
* m88k-tdep.c (m88k_return_value): Likewise.
* mep-tdep.c (mep_return_value): Likewise.
* microblaze-tdep.c (microblaze_return_value): Likewise.
* mn10300-tdep.c (mn10300_return_value): Likewise.
* moxie-tdep.c (moxie_return_value): Likewise.
* mt-tdep.c (mt_return_value): Likewise.
* ppc-linux-tdep.c (ppc_linux_return_value): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_return_value): Likewise.
(ppc_sysv_abi_broken_return_value): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* ppcnbsd-tdep.c (ppcnbsd_return_value): Likewise.
* rl78-tdep.c (rl78_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_return_value): Likewise.
* rx-tdep.c (rx_return_value): Likewise.
* s390-tdep.c (s390_return_value): Likewise.
* score-tdep.c (score_return_value): Likewise.
* sh-tdep.c (sh_return_value_nofpu): Likewise.
(sh_return_value_fpu): Likewise.
* sh64-tdep.c (sh64_return_value): Likewise.
* sparc-tdep.c (sparc32_return_value): Likewise.
* sparc64-tdep.c (sparc64_return_value): Likewise.
* spu-tdep.c (spu_return_value): Likewise.
* tic6x-tdep.c (tic6x_return_value): Likewise.
* v850-tdep.c (v850_return_value): Likewise.
* vax-tdep.c (vax_return_value): Likewise.
* xstormy16-tdep.c (xstormy16_return_value): Likewise.
* xtensa-tdep.c (xtensa_return_value): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.

gdb/testsuite/
* gdb.base/return-nodebug.exp: Also test float and double types.

PR binutils/13558
* bfd/aout-cris.c: Include sysdep.h before bfd.h.
* bfd/aout-ns32k.c: Likewise.
* bfd/aout-sparcle.c: Likewise.
* bfd/aout0.c: Likewise.
* bfd/bfd-in2.h: Likewise.
* bfd/coff-stgo32.c: Likewise.
* bfd/cpu-lm32.c: Likewise.
* bfd/cpu-microblaze.c: Likewise.
* bfd/cpu-score.c: Likewise.
* bfd/cpu-tilegx.c: Likewise.
* bfd/cpu-tilepro.c: Likewise.
* bfd/elf32-lm32.c: Likewise.
* bfd/elf32-microblaze.c: Likewise.
* bfd/elf32-score7.c: Likewise.
* bfd/elf32-tilepro.c: Likewise.
* bfd/elfxx-tilegx.c: Likewise.
* bfd/mach-o.h: Likewise.
* bfd/nlm32-ppc.c: Likewise.
* bfd/ns32knetbsd.c: Likewise.
* bfd/pef.h: Likewise.
* bfd/plugin.c: Likewise.
* bfd/stab-syms.c: Likewise.
* bfd/sunos.c: Likewise.
* bfd/syms.c: Likewise.
* bfd/xsym.h: Likewise.

* Makefile.am (CFILES): Add syslex_wrap.c.
(sysinfo): Depend upon syslex_wrap.o.
(syslex_wrap.o): New rule.
(syslex.o): Delete rule.
* syslex_wrap.c: New file.
* Makefile.in: Regenerate.

* elflink.c: Rename flaginfo to flinfo throughout, except..
(bfd_elf_lookup_section_flags): ..here, rename finfo to flaginfo.
Formatting, style.  Simplify flag match.

* dwarf2.c: Formatting.
(arange_add): Pass in unit rather than bfd.  Update callers.
Ignore empty ranges.  Don't ask for cleared memory.
(parse_comp_unit): Only set unit->base_address if processing
DW_TAG_compile_unit.
(find_debug_info): Optimise section lookup.
(place_sections): Use bfd_alloc for stash->adjusted_sections.
(find_line): Match previously parsed comp unit addresses as we
do for newly parsed comp units.

* archive.c (_bfd_generic_read_ar_hdr_mag):  Ensure sscanf
stops at end of ar_size field.

* arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
to PUSH/POP {reg}.

* binutils-all/arm/objdump.exp:
STMFD/LDMIA sp!, {reg} don't disassemble to PUSH/POP {reg} any longer.

* gas/arm/stm-ldm.d: STMFD/LDMIA sp!, {reg} don't disassemble to
PUSH/POP {reg} any longer.  Some new test cases have been added as well.
* gas/arm/stm-ldm.s: Likewise.

PR ld/14069
* emultempl/elf32.em: Include *-*-gnu* targets in ld.so.conf
support.

* config/tc-m68k.c (m68k_cpus): Add 51ag, 51je, 51jf, 51jg, 51mm,
51qm variants.

  PR ld/13962
  PR ld/7023
* elf.c (bfd_section_from_shdr): Fail when .dynsym sh_info is
out of range.  As a special case, fix sh_info for zero sh_size.
Do the same for .symtab.

daily update

*** empty log message ***

* python/python.c (gdbpy_find_pc_line): Use gdb_py_ulongest.

Rewrote a loop that caused a seg fault on Windows systems.

init_breakpoint_sal: Add quotes around part of command in error message

gdb/ChangeLog:

        * breakpoint.c (init_breakpoint_sal): Add quotes around part
        of command in two error message.

Remove trailing spaces in breakpoint.c:init_breakpoint_sal

gdb/ChangeLog:

        * breakpoint.c (init_breakpoint_sal): Remove trailing spaces.

Minor style fixes in breakpoint.c:find_condition_and_thread

Mostly removing trailing spaces at end of lines, and also adding
an empty line after the function's documentation.

gdb/ChangeLog:

        * breakpoint.c (find_condition_and_thread): Minor reformatting.

gdb/testsuite/
* gdb.base/dprintf.exp: Remove now redundant breakpoint for main.

gdb/testsuite/
PR testsuite/12649
* gdb.base/dprintf.exp: Replace gdb_run_cmd by runto main.

* config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Tweak target flags to match other tools. (i.e. -m m68hc11).
* doc/as.texinfo: Mention new options.
* doc/c-m68hc11.texi: Document new options.
* NEWS: Mention new support.

* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
* config.bfd: Likewise.
* cpu-m9s12x.c: New.
* cpu-m9s12xg.c: New.
* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Fix carry bug in IMM16 (IMM8 low/high) relocate.
* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
(ALL_MACHINES_CFILES): Likewise.
* reloc.c: Add S12X relocs.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

* gas/m68hc11/insns9s12x.s: New
* gas/m68hc11/insns9s12x.d: New
* gas/m68hc11/hexprefix.s: New
* gas/m68hc11/hexprefix.d: New
* gas/m68hc11/9s12x-exg-sex-tfr.s: New
* gas/m68hc11/9s12x-exg-sex-tfr.d: New
* gas/m68hc11/insns9s12xg.s: New
* gas/m68hc11/insns9s12xg.d: New
* gas/m68hc11/9s12x-mov.s: New
* gas/m68hc11/9s12x-mov.d: New
* gas/m68hc11/m68hc11.exp: Updated
* gas/m68hc11/*.d: Brought in line with changed objdump output.
* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
* gas/elf/dwarf2-2.d: Likewise.

* ld-m68hc11/xgate-link.s: New.
* ld-m68hc11/xgate-link.d: New.
* ld-m68hc11/xgate-offset.s: New.
* ld-m68hc11/xgate-offset.d: New.
* ld-m68hc11/xgate1.s: New.
* ld-m68hc11/xgate1.d: New.
* ld-m68hc11/xgate2.s: New.
* ld-m68hc11/m68hc11.exp: Updated.
* ld-m68hc11/*.d: Brought in line with changed objdump output.
* ld-gc/gc.exp: Update CFLAGS for m68hc11.
* ld-plugin/plugin.exp: Likewise.
* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.

* configure.in: Add S12X and XGATE co-processor support to m68hc11
target.
* disassemble.c: Likewise.
* configure: Regenerate.
* m68hc11-dis.c: Make objdump output more consistent, use hex
instead of decimal and use 0x prefix for hex.
* m68hc11-opc.c: Add S12X and XGATE opcodes.
* dis-asm.h (print_insn_m9s12x): Prototype.
(print_insn_m9s12xg): Prototype.

* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
(E_M68HC11_XGATE_RAMOFFSET): Define.

* m68hc11.h: Add XGate definitions.
(struct m68hc11_opcode): Add xg_mask field.

gdb/
* NEWS (show auto-load scripts-directory): Add forgotten command.

gdb/
* spu-tdep.c (spu_catch_start): Update create_breakpoint caller
parameters.

Fix PLT section number regexps in sparc TLS tests.

ld/testsuite/

* ld-sparc/tlssunbin32.rd: Update.
* ld-sparc/tlssunbin64.rd: Likewise.

* config/rx-parse.y (rx_range): declare.
(O1,O2,O3,O4): Add calls to rx_range.
(UO1,UO2,UO3): Likewise.
(IMM2,IMMB): Likewise.
(rx_range): New.

* config/tc-rx.c (rx_fetchalign): Declare.
(md_pseudo_table): Add .fetchalign.
(RX_NBASE_FETCHALIGN): New.
(fetchalign_bytes): New.
(rx_fetchalign): New.
(rx_frag_init): If a "magic" value is found, also init the
machine-specific data.
(md_assemble): Note following opcode size if called for.
(rx_next_opcode): New.
(rx_relax_frag): Support .fetchalign.
(md_convert_frag): Likewise.
* doc/c-rx.texi (RX-Directives): Add .fetchalign.

daily update

*** empty log message ***

gdb/testsuite/ChangeLog:
2012-05-14  Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.base/stap-probe.exp (stap_test): Remove calls to
`rerun_to_main'.
(stap_test_no_debuginfo): Likewise.

Add support for PowerPC VLE.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

* NEWS:  Mention PowerPC VLE port.

2012-05-14  James Lemke <jwlemke@codesourcery.com>
    Catherine Moore  <clm@codesourcery.com>

bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
    Rhonda Wittels  <rhonda@codesourcery.com>

gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS:  Mention PowerPC VLE port.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
    Rhonda Wittels  <rhonda@codesourcery.com>

gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
    James Lemke  <jwlemke@codesourcery.com>

include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
    Rhonda Wittels  <rhonda@codesourcery.com>

include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

ld/
* NEWS:  Mention PowerPC VLE port.

2012-05-14  Catherine Moore  <clm@codesourcery.com>

ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.

2012-05-14  James Lemke  <jwlemke@codesourcery.com>

opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.

2012-05-14  Catherine Moore  <clm@codesourcery.com>
            Maciej W. Rozycki  <macro@codesourcery.com>
    Rhonda Wittels  <rhonda@codesourcery.com>
    Nathan Froyd <froydnj@codesourcery.com>

opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
  (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
  (BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
  (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
  (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions.  Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.

Call initialize_tdesc_x32/initialize_tdesc_x32_avx

* amd64-tdep.c: Include features/i386/x32.c and
features/i386/x32-avx.c.
(_initialize_amd64_tdep): Call initialize_tdesc_x32 and
initialize_tdesc_x32_avx.

gold/

* layout.cc (Layout::make_output_section): Mark .tdata section
as RELRO.
* testsuite/relro_test.cc: Add a TLS variable.

2012-05-14  Stan Shebs  <stan@codesourcery.com>

Add dynamic printf.
* breakpoint.h (enum bptype): New type bp_dprintf.
(struct breakpoint): New field extra_string.
(struct breakpoint_ops): Add arg to create_breakpoints_sal.
(create_breakpoint): Add extra_string arg.
* breakpoint.c (dprintf_breakpoint_ops): New.
(is_breakpoint): Add bp_dprintf.
(bpstat_what): Add dprintf case.
(bptype_string): Ditto.
(print_one_breakpoint_location): Ditto.
(init_bp_location): Ditto.
(bkpt_print_mention): Ditto.
(dprintf_style_enums): New array.
(dprintf_style): New global.
(dprintf_function): New global.
(dprintf_channel): New global.
(update_dprintf_command_list): New function.
(update_dprintf_commands): New function.
(init_breakpoint_sal): Add extra_string argument, handle it.
(create_breakpoint_sal): Add extra_string argument.
(create_breakpoints_sal): Add extra_string argument, update callers.
(find_condition_and_thread): Add extra argument.
(create_breakpoint): Add extra_string argument, record it.
(dprintf_command): New function.
(break_command_1): Add arg to create_breakpoint call.
(handle_gnu_v3_exceptions): Ditto.
(trace_command): Ditto.
(ftrace_command): Ditto.
(strace_command): Ditto.
(bkpt_print_mention): Add dprintf case.
(create_breakpoint_sal_default): Add extra_string argument.
(_initialize_breakpoint): Add new commands.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Add arg to call.
* python/py-breakpoint.c (bppy_init): Ditto.
* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.

* gdb.texinfo (Dynamic Printf): New subsection.

* gdb.base/dprintf.c: New file.
* gdb.base/dprintf.exp: New file.

Expect addend as signed

* gas/cris/rd-pic-1.d: Expect addend as signed.
* gas/cris/rd-tls-1.d: Likewise.
* gas/cris/rd-tls-2.d: Likewise.

* mips-tdep.c (mips_push_dummy_code): Correct description typo.

2012-05-14  Siva Chandra Reddy  <sivachandra@google.com>

* python/python.c (gdbpy_find_pc_line): Use ULONGEST instead of
unsigned long long.

Print addend as signed in objdump

binutils/

* objdump.c (disassemble_bytes): Print addend as signed.
(dump_reloc_set): Likewise.

gas/testsuite/

* gas/all/fwdexp.d: Expect addend as signed.
* gas/alpha/elf-reloc-1.d: Likewise.
* gas/i386/mixed-mode-reloc64.d: Likewise.
* gas/i386/reloc64.d: Likewise.
* gas/i386/ilp32/mixed-mode-reloc64.d: Expect addend as signed.
* gas/i386/ilp32/reloc64.d: Likewise.
* gas/ia64/pcrel.d: Likewise.
* gas/mips/branch-misc-2-64.d: Likewise.
* gas/mips/branch-misc-2pic-64.d: Likewise.
* gas/mips/branch-misc-4-64.d: Likewise.
* gas/mips/ldstla-n64-sym32.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/mips16-hilo-n32.d: Likewise.
* gas/ppc/astest.d: Likewise.
* gas/ppc/astest2.d: Likewise.
* gas/ppc/astest2_64.d: Likewise.
* gas/ppc/astest64.d: Likewise.
* gas/ppc/test1elf32.d: Likewise.
* gas/ppc/test1elf64.d: Likewise.
* gas/sparc/reloc64.d: Likewise.

2012-05-11  Hui Zhu  <hui_zhu@mentor.com>

* gdb.trace/Makefile.in (PROGS): Add disconnected-tracing.
* gdb.trace/disconnected-tracing.c: New file.
* gdb.trace/disconnected-tracing.exp: New file.

*** empty log message ***

daily update

2012-05-13  Siva Chandra Reddy  <sivachandra@google.com>

Add a new function gdb.find_pc_line to the Python API.
* NEWS (Python Scripting): Add entry about the new function.
* python/python.c (gdbpy_find_pc_line): New function which
implements gdb.find_pc_line.
(GdbMethods): Add entry for the new function.

doc/
* gdb.texinfo (Basic Python): Add description about the function
gdb.find_pc_line

testsuite/
* gdb.python/python.c: Add a new breakpoint comment.
* gdb.python/python.exp: Add tests to test gdb.find_pc_line.

ld/testsuite/
* ld-mips-elf/mips-elf.exp (mips16_call_global_test): Use the
no-shared-1.ld linker script.
* ld-mips-elf/mips16-call-global-1.s: Add alignment directive.
* ld-mips-elf/mips16-call-global-2.s: Likewise.
* ld-mips-elf/mips16-call-global-3.s: Likewise.
* ld-mips-elf/mips16-call-global.d: Use 50000 as the base address.

ld/testsuite/
* ld-mips-elf/attr-gnu-4-00.d: Remove assembler options and emulator
linker option.
* ld-mips-elf/attr-gnu-4-01.d, ld-mips-elf/attr-gnu-4-02.d,
ld-mips-elf/attr-gnu-4-03.d, ld-mips-elf/attr-gnu-4-04.d,
ld-mips-elf/attr-gnu-4-05.d, ld-mips-elf/attr-gnu-4-10.d,
ld-mips-elf/attr-gnu-4-11.d, ld-mips-elf/attr-gnu-4-12.d,
ld-mips-elf/attr-gnu-4-13.d, ld-mips-elf/attr-gnu-4-14.d,
ld-mips-elf/attr-gnu-4-15.d, ld-mips-elf/attr-gnu-4-20.d,
ld-mips-elf/attr-gnu-4-21.d, ld-mips-elf/attr-gnu-4-22.d,
ld-mips-elf/attr-gnu-4-23.d, ld-mips-elf/attr-gnu-4-24.d,
ld-mips-elf/attr-gnu-4-25.d, ld-mips-elf/attr-gnu-4-30.d,
ld-mips-elf/attr-gnu-4-31.d, ld-mips-elf/attr-gnu-4-32.d,
ld-mips-elf/attr-gnu-4-33.d, ld-mips-elf/attr-gnu-4-34.d,
ld-mips-elf/attr-gnu-4-35.d, ld-mips-elf/attr-gnu-4-40.d,
ld-mips-elf/attr-gnu-4-41.d, ld-mips-elf/attr-gnu-4-42.d,
ld-mips-elf/attr-gnu-4-43.d, ld-mips-elf/attr-gnu-4-44.d,
ld-mips-elf/attr-gnu-4-45.d, ld-mips-elf/attr-gnu-4-51.d: Likewise.

ld/testsuite/
* ld-mips-elf/eh-frame1.ld (.gcc_compiled_long32): Add KEEP.
* ld-mips-elf/eh-frame3.d: Move definition of foo to the link line
and change to a 32-bit value.  Expect CIEs to be marged.
* ld-mips-elf/eh-frame4.d: Move definition of foo to the link line.

daily update

*** empty log message ***

gdb/doc/
* gdb.texinfo (Separate Debug Files): Use plural form for global
debugging information directory.