Sahitya Tummala [Tue, 16 Mar 2021 09:29:18 +0000 (14:59 +0530)]
f2fs: allow to change discard policy based on cached discard cmds
With the default DPOLICY_BG discard thread is ioaware, which prevents
the discard thread from issuing the discard commands. On low RAM setups,
it is observed that these discard commands in the cache are consuming
high memory. This patch aims to relax the memory pressure on the system
due to f2fs pending discard cmds by changing the policy to DPOLICY_FORCE
based on the nm_i->ram_thresh configured.
Chao Yu [Wed, 24 Mar 2021 03:18:28 +0000 (11:18 +0800)]
f2fs: fix to avoid touching checkpointed data in get_victim()
In CP disabling mode, there are two issues when using LFS or SSR | AT_SSR
mode to select victim:
1. LFS is set to find source section during GC, the victim should have
no checkpointed data, since after GC, section could not be set free for
reuse.
Previously, we only check valid chpt blocks in current segment rather
than section, fix it.
2. SSR | AT_SSR are set to find target segment for writes which can be
fully filled by checkpointed and newly written blocks, we should never
select such segment, otherwise it can cause panic or data corruption
during allocation, potential case is described as below:
a) target segment has 'n' (n < 512) ckpt valid blocks
b) GC migrates 'n' valid blocks to other segment (segment is still
in dirty list)
c) GC migrates '512 - n' blocks to target segment (segment has 'n'
cp_vblocks and '512 - n' vblocks)
d) If GC selects target segment via {AT,}SSR allocator, however there
is no free space in targe segment.
Fixes: 4354994f097d ("f2fs: checkpoint disabling") Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Wed, 24 Mar 2021 03:24:33 +0000 (11:24 +0800)]
f2fs: fix to update last i_size if fallocate partially succeeds
In the case of expanding pinned file, map.m_lblk and map.m_len
will update in each round of section allocation, so in error
path, last i_size will be calculated with wrong m_lblk and m_len,
fix it.
Fixes: f5a53edcf01e ("f2fs: support aligned pinned file") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Wed, 17 Mar 2021 09:56:04 +0000 (17:56 +0800)]
f2fs: fix error path of f2fs_remount()
In error path of f2fs_remount(), it missed to restart/stop kernel thread
or enable/disable checkpoint, then mount option status may not be
consistent with real condition of filesystem, so let's reorder remount
flow a bit as below and do recovery correctly in error path:
The root cause is, if nat entry in checkpoint journal area is corrupted,
e.g. nid of journalled nat entry exceeds max nid value, during checkpoint,
once it tries to flush nat journal to NAT area, get_next_nat_page() may
access out-of-bounds memory on nat_bitmap due to it uses wrong nid value
as bitmap offset.
Weichao Guo [Wed, 17 Mar 2021 09:27:23 +0000 (17:27 +0800)]
f2fs: do not use AT_SSR mode in FG_GC & high urgent BG_GC
AT_SSR mode is introduced by age threshold based GC for better
hot/cold data seperation and avoiding free segment cost. However,
LFS write mode is preferred in the scenario of foreground or high
urgent GC, which should be finished ASAP. Let's only use AT_SSR
in background GC and not high urgent GC modes.
Daeho Jeong [Mon, 15 Mar 2021 08:12:33 +0000 (17:12 +0900)]
f2fs: add sysfs nodes to get runtime compression stat
I've added new sysfs nodes to show runtime compression stat since mount.
compr_written_block - show the block count written after compression
compr_saved_block - show the saved block count with compression
compr_new_inode - show the count of inode newly enabled for compression
Signed-off-by: Daeho Jeong <daehojeong@google.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Fri, 5 Mar 2021 09:56:01 +0000 (17:56 +0800)]
f2fs: fix to align to section for fallocate() on pinned file
Now, fallocate() on a pinned file only allocates blocks which aligns
to segment rather than section, so GC may try to migrate pinned file's
block, and after several times of failure, pinned file's block could
be migrated to other place, however user won't be aware of such
condition, and then old obsolete block address may be readed/written
incorrectly.
To avoid such condition, let's try to allocate pinned file's blocks
with section alignment.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Eric Biggers [Fri, 5 Mar 2021 05:43:10 +0000 (21:43 -0800)]
f2fs: fix error handling in f2fs_end_enable_verity()
f2fs didn't properly clean up if verity failed to be enabled on a file:
- It left verity metadata (pages past EOF) in the page cache, which
would be exposed to userspace if the file was later extended.
- It didn't truncate the verity metadata at all (either from cache or
from disk) if an error occurred while setting the verity bit.
Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths. Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.
Finally, log a message if f2fs_truncate() fails, since it might
otherwise fail silently.
Reported-by: Yunlei He <heyunlei@hihonor.com> Fixes: 95ae251fe828 ("f2fs: add fs-verity support") Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Colin Ian King [Thu, 4 Mar 2021 09:21:18 +0000 (09:21 +0000)]
f2fs: fix a redundant call to f2fs_balance_fs if an error occurs
The uninitialized variable dn.node_changed does not get set when a
call to f2fs_get_node_page fails. This uninitialized value gets used
in the call to f2fs_balance_fs() that may or not may not balances
dirty node and dentry pages depending on the uninitialized state of
the variable. Fix this by only calling f2fs_balance_fs if err is
not set.
Thanks to Jaegeuk Kim for suggesting an appropriate fix.
Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 2a3407607028 ("f2fs: call f2fs_balance_fs only when node was changed") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the swapfile isn't created by pin and fallocate, it can't be
guaranteed section-aligned, so it may be selected by f2fs gc. When
gc_pin_file_threshold is reached, the address of swapfile may change,
but won't be synchronized to swap_extent, so swap will write to wrong
address, which will cause data corruption.
Now swapfile in f2fs directly submit IO to blockdev according to
swapfile extents reported by f2fs when swapon, therefore there is
no need to check IS_SWAPFILE when exec filesystem operation.
f2fs: Replace one-element array with flexible-array member
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in
struct f2fs_checkpoint, instead of a one-element arrays.
Notice that a temporary pointer to void '*tmp_ptr' was used in order to
fix the following errors when using a flexible array instead of a one
element array in struct f2fs_checkpoint:
CC [M] fs/f2fs/dir.o
In file included from fs/f2fs/dir.c:13:
fs/f2fs/f2fs.h: In function ‘__bitmap_ptr’:
fs/f2fs/f2fs.h:2227:40: error: invalid use of flexible array member
2227 | return &ckpt->sit_nat_version_bitmap + offset + sizeof(__le32);
| ^
fs/f2fs/f2fs.h:2227:49: error: invalid use of flexible array member
2227 | return &ckpt->sit_nat_version_bitmap + offset + sizeof(__le32);
| ^
fs/f2fs/f2fs.h:2238:40: error: invalid use of flexible array member
2238 | return &ckpt->sit_nat_version_bitmap + offset;
| ^
make[2]: *** [scripts/Makefile.build:287: fs/f2fs/dir.o] Error 1
make[1]: *** [scripts/Makefile.build:530: fs/f2fs] Error 2
make: *** [Makefile:1819: fs] Error 2
If F2FS_FS is modular, enabling the compressions options
F2FS_FS_{LZ4,LZ4HZ,LZO,LZORLE,ZSTD} will make the (de)compression
algorithms {LZ4,LZ4HC,LZO,ZSTD}_{,DE}COMPRESS builtin instead of
modular, as the former depend on an intermediate boolean
F2FS_FS_COMPRESSION, which in-turn depends on tristate F2FS_FS.
Indeed, if a boolean symbol A depends directly on a tristate symbol B
and selects another tristate symbol C:
tristate B
tristate C
bool A
depends on B
select C
and B is modular, then C will also be modular.
However, if there is an intermediate boolean D in the dependency chain
between A and B:
tristate B
tristate C
bool D
depends on B
bool A
depends on D
select C
then the modular state won't propagate from B to C, and C will be
builtin instead of modular.
As modular dependency propagation through intermediate symbols is
obscure, fix this in a robust way by moving the selection of tristate
(de)compression algorithms from the boolean compression options to the
tristate main F2FS_FS option.
Chao Yu [Mon, 22 Feb 2021 10:07:33 +0000 (18:07 +0800)]
f2fs: check discard command number before traversing discard pending list
In trim thread, let's add a condition to check discard command number
before traversing discard pending list, it can avoid unneeded traversing
if there is no discard command.
Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fix this issue by covering f2fs_show_compress_options() with
CONFIG_F2FS_FS_COMPRESSION macro.
Fixes: 4c8ff7095bef ("f2fs: support data compression") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The root cause is we forgot to check that whether we have enough space
in resized filesystem to store all valid blocks in before-resizing
filesystem, then allocator will run out-of-space during block migration
in free_segment_range().
Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Sat, 20 Feb 2021 09:35:40 +0000 (17:35 +0800)]
f2fs: fix to allow migrating fully valid segment
F2FS_IOC_FLUSH_DEVICE/F2FS_IOC_RESIZE_FS needs to migrate all blocks of
target segment to other place, no matter the segment has partially or fully
valid blocks.
However, after commit 803e74be04b3 ("f2fs: stop GC when the victim becomes
fully valid"), we may skip migration due to target segment is fully valid,
result in failing the ioctl interface, fix this.
Fixes: 803e74be04b3 ("f2fs: stop GC when the victim becomes fully valid") Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Linus Torvalds [Fri, 12 Mar 2021 20:01:26 +0000 (12:01 -0800)]
Merge tag 'sound-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No surprise here, only a collection of device-specific fixes for
USB-audio and HD-audio at this time"
* tag 'sound-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Cancel pending works before suspend
ALSA: hda: Avoid spurious unsol event handling during S3/S4
ALSA: hda: Flush pending unsolicited events before suspend
ALSA: usb-audio: fix use after free in usb_audio_disconnect
ALSA: usb-audio: fix NULL ptr dereference in usb_audio_probe
ALSA: hda/ca0132: Add Sound BlasterX AE-5 Plus support
ALSA: hda: Drop the BATCH workaround for AMD controllers
ALSA: hda/conexant: Add quirk for mute LED control on HP ZBook G5
ALSA: usb-audio: Apply the control quirk to Plantronics headsets
ALSA: usb-audio: Fix "cannot get freq eq" errors on Dell AE515 sound bar
ALSA: hda: ignore invalid NHLT table
ALSA: usb-audio: Disable USB autosuspend properly in setup_disable_autosuspend()
ALSA: usb: Add Plantronics C320-M USB ctrl msg delay quirk
Linus Torvalds [Fri, 12 Mar 2021 19:58:33 +0000 (11:58 -0800)]
Merge tag 'mmc-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix partition switch time for eMMC
MMC host:
- mmci: Enforce R1B response to fix busy detection for
the stm32 variants
- cqhci: Fix crash when removing mmc module/card"
* tag 'mmc-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: cqhci: Fix random crash when remove mmc module/card
mmc: core: Fix partition switch time for eMMC
mmc: mmci: Add MMC_CAP_NEED_RSP_BUSY for the stm32 variants
Linus Torvalds [Fri, 12 Mar 2021 19:55:58 +0000 (11:55 -0800)]
Merge tag 'regulator-fix-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A small collection fo driver specific fixes that have arrived since
the merge window"
* tag 'regulator-fix-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6315: Fix off-by-one for .n_voltages
regulator: rt4831: Fix return value check in rt4831_regulator_probe()
regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting
regulator: qcom-rpmh: Use correct buck for S1C regulator
regulator: qcom-rpmh: Correct the pmic5_hfsmps515 buck
regulator: pca9450: Fix return value when failing to get sd-vsel GPIO
regulator: mt6315: Return REGULATOR_MODE_INVALID for invalid mode
Linus Torvalds [Fri, 12 Mar 2021 19:46:09 +0000 (11:46 -0800)]
Merge tag 'gfs2-v5.12-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes"
* tag 'gfs2-v5.12-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: bypass log flush if the journal is not live
gfs2: bypass signal_our_withdraw if no journal
gfs2: fix use-after-free in trans_drain
gfs2: make function gfs2_make_fs_ro() to void type
Linus Torvalds [Fri, 12 Mar 2021 19:39:53 +0000 (11:39 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a smattering of changes all over the place which we've
acrued since -rc1. To my knowledge, there aren't any pending issues at
the moment, but there's still plenty of time for something else to
crop up...
Summary:
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe()
arm64: mm: remove unused __cpu_uses_extended_idmap[_level()]
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
arm64: perf: Fix 64-bit event counter read truncation
arm64/mm: Fix __enable_mmu() for new TGRAN range values
kselftest: arm64: Fix exit code of sve-ptrace
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64/mm: Reorganize pfn_valid()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER
arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE
arm64: Drop support for CMDLINE_EXTEND
arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
Linus Torvalds [Fri, 12 Mar 2021 19:34:36 +0000 (11:34 -0800)]
Merge tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fix series and a single cleanup:
- a small cleanup patch to remove unneeded symbol exports
- a series to cleanup Xen grant handling (avoiding allocations in
some cases, and using common defines for "invalid" values)
- a series to address a race issue in Xen event channel handling"
* tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/gntdev: don't needlessly use kvcalloc()
Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}
Xen/gntdev: don't needlessly allocate k{,un}map_ops[]
Xen: drop exports of {set,clear}_foreign_p2m_mapping()
xen/events: avoid handling the same event on two cpus at the same time
xen/events: don't unmask an event channel when an eoi is pending
xen/events: reset affinity of 2-level event when tearing it down
Bob Peterson [Fri, 12 Mar 2021 13:47:47 +0000 (08:47 -0500)]
gfs2: bypass log flush if the journal is not live
Patch fe3e397668775 ("gfs2: Rework the log space allocation logic")
changed gfs2_log_flush to reserve a set of journal blocks in case no
transaction is active. However, gfs2_log_flush also gets called in
cases where we don't have an active journal, for example, for spectator
mounts. In that case, trying to reserve blocks would sleep forever, but
we want gfs2_log_flush to be a no-op instead.
Fixes: fe3e397668775 ("gfs2: Rework the log space allocation logic") Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Bob Peterson [Fri, 12 Mar 2021 12:58:54 +0000 (07:58 -0500)]
gfs2: bypass signal_our_withdraw if no journal
Before this patch, function signal_our_withdraw referenced the journal
inode immediately. But corrupt file systems may have some invalid
journals, in which case our attempt to read it in will withdraw and the
resulting signal_our_withdraw would dereference the NULL value.
This patch adds a check to signal_our_withdraw so that if the journal
has not yet been initialized, it simply returns and does the old-style
withdraw.
Thanks, Andy Price, for his analysis.
Reported-by: syzbot+50a8a9cf8127f2c6f5df@syzkaller.appspotmail.com Fixes: 601ef0d52e96 ("gfs2: Force withdraw to replay journals and wait for it to finish") Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Linus Torvalds [Fri, 12 Mar 2021 01:38:49 +0000 (17:38 -0800)]
Merge tag 'drm-fixes-2021-03-12-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes for rc3. The i915 pull was based on the rc1 tag so I
just cherry-picked the single fix from there to avoid it. The misc and
amd trees seem to be on okay bases.
It's a bunch of fixes across the tree, amdgpu has most of them a few
ttm fixes around qxl, and nouveau.
core:
- Clear holes when converting compat ioctl's between 32-bits and
64-bits.
docs:
- Use gitlab for drm bugzilla now.
ttm:
- Fix ttm page pool accounting.
fbdev:
- Fix oops in drm_fbdev_cleanup()
shmem:
- Assorted fixes for shmem helpers.
qxl:
- unpin qxl bos created as pinned when freeing them, and make ttm
only warn once on this behavior.
- Zero head.surface_id correctly in qxl.
atyfb:
- Use LCD management for atyfb on PPC_MAC.
meson:
- Shutdown kms poll helper in meson correctly.
nouveau:
- fix regression in bo syncing
i915:
- Wedge the GPU if command parser setup fails
amdgpu:
- Fix aux backlight control
- Add a backlight override parameter
- Various display fixes
- PCIe DPM fix for vega
- Polaris watermark fixes
- Additional S0ix fix
* tag 'drm-fixes-2021-03-12-1' of git://anongit.freedesktop.org/drm/drm: (33 commits)
drm/nouveau: fix dma syncing for loops (v2)
drm/i915: Wedge the GPU if command parser setup fails
drm/compat: Clear bounce structures
drm/shmem-helpers: vunmap: Don't put pages for dma-buf
drm: meson_drv add shutdown function
drm/shmem-helper: Don't remove the offset in vm_area_struct pgoff
drm/shmem-helper: Check for purged buffers in fault handler
qxl: Fix uninitialised struct field head.surface_id
drm/ttm: Fix TTM page pool accounting
drm/ttm: soften TTM warnings
drm: Use USB controller's DMA mask when importing dmabufs
MAINTAINERS: update drm bug reporting URL
fbdev: atyfb: use LCD management functions for PPC_PMAC also
fbdev: atyfb: always declare aty_{ld,st}_lcd()
drm/qxl: fix lockdep issue in qxl_alloc_release_reserved
drm/qxl: unpin release objects
drm/fb-helper: only unmap if buffer not null
drm/amdgpu: fix S0ix handling when the CONFIG_AMD_PMC=m
drm/radeon: fix AGP dependency
drm/radeon: also init GEM funcs in radeon_gem_prime_import_sg_table
...
Tvrtko Ursulin [Tue, 2 Mar 2021 11:42:13 +0000 (11:42 +0000)]
drm/i915: Wedge the GPU if command parser setup fails
Commit 311a50e76a33 ("drm/i915: Add support for mandatory cmdparsing")
introduced mandatory command parsing but setup failures were not
translated into wedging the GPU which was probably the intent.
Possible errors come in two categories. Either the sanity check on
internal tables has failed, which should be caught in CI unless an
affected platform would be missed in testing; or memory allocation failure
happened during driver load, which should be extremely unlikely but for
correctness should still be handled.
v2:
* Tidy coding style. (Chris)
[airlied: cherry-picked to avoid rc1 base] Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 311a50e76a33 ("drm/i915: Add support for mandatory cmdparsing") Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Reviewed-by: Chris Wilson <chris.p.wilson@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210302114213.1102223-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 5a1a659762d35a6dc51047c9127c011303c77b7f) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 12 Mar 2021 00:19:55 +0000 (10:19 +1000)]
Merge tag 'drm-misc-fixes-2021-03-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for rc3, rebased on rc2:
- Fix oops in drm_fbdev_cleanup()
- unpin qxl bos created as pinned when freeing them,
and make ttm only warn once on this behavior.
- Use LCD management for atyfb on PPC_MAC.
- Use gitlab for drm bugzilla now.
- Fix ttm page pool accounting.
- Zero head.surface_id correctly in qxl.
- Assorted fixes for shmem helpers.
- Shutdown kms poll helper in meson correctly.
- Clear holes when converting compat ioctl's between 32-bits and 64-bits.
These routines lost all existing users during the latest merge window so
we can remove them. This avoids the need to fix them in the context of
fixing a regression related to the ID map on 52-bit VA kernels.
Ard Biesheuvel [Wed, 10 Mar 2021 17:15:11 +0000 (18:15 +0100)]
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
52-bit VA kernels can run on hardware that is only 48-bit capable, but
configure the ID map as 52-bit by default. This was not a problem until
recently, because the special T0SZ value for a 52-bit VA space was never
programmed into the TCR register anwyay, and because a 52-bit ID map
happens to use the same number of translation levels as a 48-bit one.
This behavior was changed by commit 1401bef703a4 ("arm64: mm: Always update
TCR_EL1 from __cpu_set_tcr_t0sz()"), which causes the unsupported T0SZ
value for a 52-bit VA to be programmed into TCR_EL1. While some hardware
simply ignores this, Mark reports that Amberwing systems choke on this,
resulting in a broken boot. But even before that commit, the unsupported
idmap_t0sz value was exposed to KVM and used to program TCR_EL2 incorrectly
as well.
Given that we already have to deal with address spaces being either 48-bit
or 52-bit in size, the cleanest approach seems to be to simply default to
a 48-bit VA ID map, and only switch to a 52-bit one if the placement of the
kernel in DRAM requires it. This is guaranteed not to happen unless the
system is actually 52-bit VA capable.
Daiyue Zhang [Mon, 1 Mar 2021 06:10:53 +0000 (14:10 +0800)]
configfs: fix a use-after-free in __configfs_open_file
Commit b0841eefd969 ("configfs: provide exclusion between IO and removals")
uses ->frag_dead to mark the fragment state, thus no bothering with extra
refcount on config_item when opening a file. The configfs_get_config_item
was removed in __configfs_open_file, but not with config_item_put. So the
refcount on config_item will lost its balance, causing use-after-free
issues in some occasions like this:
2. Then run:
for file in /config
do
echo $file
grep -R 'key' $file
done
3. __configfs_open_file will be called in parallel, the first one
got called will do:
if (file->f_mode & FMODE_READ) {
if (!(inode->i_mode & S_IRUGO))
goto out_put_module;
config_item_put(buffer->item);
kref_put()
package_details_release()
kfree()
the other one will run into use-after-free issues like this:
BUG: KASAN: use-after-free in __configfs_open_file+0x1bc/0x3b0
Read of size 8 at addr fffffff155f02480 by task grep/13096
CPU: 0 PID: 13096 Comm: grep VIP: 00 Tainted: G W 4.14.116-kasan #1
TGID: 13096 Comm: grep
Call trace:
dump_stack+0x118/0x160
kasan_report+0x22c/0x294
__asan_load8+0x80/0x88
__configfs_open_file+0x1bc/0x3b0
configfs_open_file+0x28/0x34
do_dentry_open+0x2cc/0x5c0
vfs_open+0x80/0xe0
path_openat+0xd8c/0x2988
do_filp_open+0x1c4/0x2fc
do_sys_open+0x23c/0x404
SyS_openat+0x38/0x48
To fix this issue, remove the config_item_put in
__configfs_open_file to balance the refcount of config_item.
Fixes: b0841eefd969 ("configfs: provide exclusion between IO and removals") Signed-off-by: Daiyue Zhang <zhangdaiyue1@huawei.com> Signed-off-by: Yi Chen <chenyi77@huawei.com> Signed-off-by: Ge Qiu <qiuge@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
The histogram mode is set using 'rkisp1_params_set_bits'.
Only the bits of the mode should be the value argument for
that function. Otherwise bits outside the mode mask are
turned on which is not what was intended.
usbtv doesn't support power management, so on system suspend the
.disconnect callback of the driver is called. The teardown sequence
includes a call to snd_card_free. Its implementation waits until the
refcount of the sound card device drops to zero, however, if its file is
open, snd_card_file_add takes a reference, which can't be dropped during
the suspend, because the userspace processes are already frozen at this
point. snd_card_free waits for completion forever, leading to a hang on
suspend.
This commit fixes this deadlock condition by replacing snd_card_free
with snd_card_free_when_closed, that doesn't wait until all references
are released, allowing suspend to progress.
Hans Verkuil [Fri, 26 Feb 2021 10:37:47 +0000 (11:37 +0100)]
media: rc: compile rc-cec.c into rc-core
The rc-cec keymap is unusual in that it can't be built as a module,
instead it is registered directly in rc-main.c if CONFIG_MEDIA_CEC_RC
is set. This is because it can be called from drm_dp_cec_set_edid() via
cec_register_adapter() in an asynchronous context, and it is not
allowed to use request_module() to load rc-cec.ko in that case. Trying to
do so results in a 'WARN_ON_ONCE(wait && current_is_async())'.
Since this keymap is only used if CONFIG_MEDIA_CEC_RC is set, we
just compile this keymap into the rc-core module and never as a
separate module.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 2c6d1fffa1d9 (drm: add support for DisplayPort CEC-Tunneling-over-AUX) Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Daniel Vetter [Mon, 22 Feb 2021 10:06:43 +0000 (11:06 +0100)]
drm/compat: Clear bounce structures
Some of them have gaps, or fields we don't clear. Native ioctl code
does full copies plus zero-extends on size mismatch, so nothing can
leak. But compat is more hand-rolled so need to be careful.
None of these matter for performance, so just memset.
Also I didn't fix up the CONFIG_DRM_LEGACY or CONFIG_DRM_AGP ioctl, those
are security holes anyway.
Noralf Trønnes [Fri, 19 Feb 2021 12:22:03 +0000 (13:22 +0100)]
drm/shmem-helpers: vunmap: Don't put pages for dma-buf
dma-buf importing was reworked in commit 7d2cd72a9aa3
("drm/shmem-helpers: Simplify dma-buf importing"). Before that commit
drm_gem_shmem_prime_import_sg_table() did set ->pages_use_count=1 and
drm_gem_shmem_vunmap_locked() could call drm_gem_shmem_put_pages()
unconditionally. Now without the use count set, put pages is called also
on dma-bufs. Fix this by only putting pages if it's not imported.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Fixes: 7d2cd72a9aa3 ("drm/shmem-helpers: Simplify dma-buf importing") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219122203.51130-1-noralf@tronnes.org
(cherry picked from commit cdea72518a2b38207146e92e1c9e2fac15975679) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Neil Roberts [Tue, 23 Feb 2021 15:51:25 +0000 (16:51 +0100)]
drm/shmem-helper: Don't remove the offset in vm_area_struct pgoff
When mmapping the shmem, it would previously adjust the pgoff in the
vm_area_struct to remove the fake offset that is added to be able to
identify the buffer. This patch removes the adjustment and makes the
fault handler use the vm_fault address to calculate the page offset
instead. Although using this address is apparently discouraged, several
DRM drivers seem to be doing it anyway.
The problem with removing the pgoff is that it prevents
drm_vma_node_unmap from working because that searches the mapping tree
by address. That doesn't work because all of the mappings are at offset
0. drm_vma_node_unmap is being used by the shmem helpers when purging
the buffer.
This fixes a bug in Panfrost which is using drm_gem_shmem_purge. Without
this the mapping for the purged buffer can still be accessed which might
mean it would access random pages from other buffers
v2: Don't check whether the unsigned page_offset is less than 0.
Cc: stable@vger.kernel.org Fixes: 17acb9f35ed7 ("drm/shmem: Add madvise state and purge helpers") Signed-off-by: Neil Roberts <nroberts@igalia.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210223155125.199577-3-nroberts@igalia.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Neil Roberts [Tue, 23 Feb 2021 15:51:24 +0000 (16:51 +0100)]
drm/shmem-helper: Check for purged buffers in fault handler
When a buffer is madvised as not needed and then purged, any attempts to
access the buffer from user-space should cause a bus fault. This patch
adds a check for that.
Cc: stable@vger.kernel.org Fixes: 17acb9f35ed7 ("drm/shmem: Add madvise state and purge helpers") Signed-off-by: Neil Roberts <nroberts@igalia.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210223155125.199577-2-nroberts@igalia.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Colin Ian King [Thu, 4 Mar 2021 09:49:28 +0000 (09:49 +0000)]
qxl: Fix uninitialised struct field head.surface_id
The surface_id struct field in head is not being initialized and
static analysis warns that this is being passed through to
dev->monitors_config->heads[i] on an assignment. Clear up this
warning by initializing it to zero.
Addresses-Coverity: ("Uninitialized scalar variable") Fixes: a6d3c4d79822 ("qxl: hook monitors_config updates into crtc, not encoder.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210304094928.2280722-1-colin.king@canonical.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Anthony DeRossi [Wed, 3 Mar 2021 01:17:25 +0000 (17:17 -0800)]
drm/ttm: Fix TTM page pool accounting
Freed pages are not subtracted from the allocated_pages counter in
ttm_pool_type_fini(), causing a leak in the count on device removal.
The next shrinker invocation loops forever trying to free pages that are
no longer in the pool:
Using ttm_pool_type_take() to remove pages from the pool before freeing
them correctly accounts for the freed pages.
Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Signed-off-by: Anthony DeRossi <ajderossi@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210303011723.22512-1-ajderossi@gmail.com Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
drm: Use USB controller's DMA mask when importing dmabufs
USB devices cannot perform DMA and hence have no dma_mask set in their
device structure. Therefore importing dmabuf into a USB-based driver
fails, which breaks joining and mirroring of display in X11.
For USB devices, pick the associated USB controller as attachment device.
This allows the DRM import helpers to perform the DMA setup. If the DMA
controller does not support DMA transfers, we're out of luck and cannot
import. Our current USB-based DRM drivers don't use DMA, so the actual
DMA device is not important.
Tested by joining/mirroring displays of udl and radeon under Gnome/X11.
v8:
* release dmadev if device initialization fails (Noralf)
* fix commit description (Noralf)
v7:
* fix use-before-init bug in gm12u320 (Dan)
v6:
* implement workaround in DRM drivers and hold reference to
DMA device while USB device is in use
* remove dev_is_usb() (Greg)
* collapse USB helper into usb_intf_get_dma_device() (Alan)
* integrate Daniel's TODO statement (Daniel)
* fix typos (Greg)
v5:
* provide a helper for USB interfaces (Alan)
* add FIXME item to documentation and TODO list (Daniel)
v4:
* implement workaround with USB helper functions (Greg)
* use struct usb_device->bus->sysdev as DMA device (Takashi)
v3:
* drop gem_create_object
* use DMA mask of USB controller, if any (Daniel, Christian, Noralf)
v2:
* move fix to importer side (Christian, Daniel)
* update SHMEM and CMA helpers for new PRIME callbacks
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB devices") Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Noralf Trønnes <noralf@tronnes.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Randy Dunlap [Wed, 24 Feb 2021 21:55:28 +0000 (13:55 -0800)]
fbdev: atyfb: always declare aty_{ld,st}_lcd()
The previously added stubs for aty_{ld,}st_lcd() make it
so that these functions are used regardless of the config
options that were guarding them, so remove the #ifdef/#endif
lines and make their declarations always visible.
This fixes build warnings that were reported by clang:
drivers/video/fbdev/aty/atyfb_base.c:180:6: warning: no previous prototype for function 'aty_st_lcd' [-Wmissing-prototypes]
void aty_st_lcd(int index, u32 val, const struct atyfb_par *par)
^
drivers/video/fbdev/aty/atyfb_base.c:180:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void aty_st_lcd(int index, u32 val, const struct atyfb_par *par)
drivers/video/fbdev/aty/atyfb_base.c:183:5: warning: no previous prototype for function 'aty_ld_lcd' [-Wmissing-prototypes]
u32 aty_ld_lcd(int index, const struct atyfb_par *par)
^
drivers/video/fbdev/aty/atyfb_base.c:183:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
u32 aty_ld_lcd(int index, const struct atyfb_par *par)
They should not be marked as static since they are used in
mach64_ct.c.
Fixes: bfa5782b9caa ("fbdev: atyfb: add stubs for aty_{ld,st}_lcd()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224215528.822-1-rdunlap@infradead.org Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tong Zhang [Sun, 28 Feb 2021 04:46:25 +0000 (23:46 -0500)]
drm/fb-helper: only unmap if buffer not null
drm_fbdev_cleanup() can be called when fb_helper->buffer is null, hence
fb_helper->buffer should be checked before calling
drm_client_buffer_vunmap(). This buffer is also checked in
drm_client_framebuffer_delete(), so we should also do the same thing for
drm_client_buffer_vunmap().
Jan Beulich [Wed, 10 Mar 2021 10:46:13 +0000 (11:46 +0100)]
Xen/gntdev: don't needlessly use kvcalloc()
Requesting zeroed memory when all of it will be overwritten subsequently
by all ones is a waste of processing bandwidth. In fact, rather than
recording zeroed ->grants[], fill that array too with more appropriate
"invalid" indicators.
Jan Beulich [Wed, 10 Mar 2021 10:45:26 +0000 (11:45 +0100)]
Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}
It's not helpful if every driver has to cook its own. Generalize
xenbus'es INVALID_GRANT_HANDLE and pcifront's INVALID_GRANT_REF (which
shouldn't have expanded to zero to begin with). Use the constants in
p2m.c and gntdev.c right away, and update field types where necessary so
they would match with the constants' types (albeit without touching
struct ioctl_gntdev_grant_ref's ref field, as that's part of the public
interface of the kernel and would require introducing a dependency on
Xen's grant_table.h public header).
Jan Beulich [Tue, 9 Mar 2021 17:00:44 +0000 (18:00 +0100)]
Xen: drop exports of {set,clear}_foreign_p2m_mapping()
They're only used internally, and the layering violation they contain
(x86) or imply (Arm) of calling HYPERVISOR_grant_table_op() strongly
advise against any (uncontrolled) use from a module. The functions also
never had users except the ones from drivers/xen/grant-table.c forever
since their introduction in 3.15.
Juergen Gross [Sat, 6 Mar 2021 16:18:33 +0000 (17:18 +0100)]
xen/events: avoid handling the same event on two cpus at the same time
When changing the cpu affinity of an event it can happen today that
(with some unlucky timing) the same event will be handled on the old
and the new cpu at the same time.
Avoid that by adding an "event active" flag to the per-event data and
call the handler only if this flag isn't set.
Juergen Gross [Sat, 6 Mar 2021 16:18:32 +0000 (17:18 +0100)]
xen/events: don't unmask an event channel when an eoi is pending
An event channel should be kept masked when an eoi is pending for it.
When being migrated to another cpu it might be unmasked, though.
In order to avoid this keep three different flags for each event channel
to be able to distinguish "normal" masking/unmasking from eoi related
masking/unmasking and temporary masking. The event channel should only
be able to generate an interrupt if all flags are cleared.
Cc: stable@vger.kernel.org Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework") Reported-by: Julien Grall <julien@xen.org> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Julien Grall <jgrall@amazon.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Ross Lagerwall <ross.lagerwall@citrix.com> Link: https://lore.kernel.org/r/20210306161833.4552-3-jgross@suse.com
[boris -- corrected Fixed tag format]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Christian König [Mon, 8 Mar 2021 18:22:13 +0000 (19:22 +0100)]
drm/radeon: fix AGP dependency
When AGP is compiled as module radeon must be compiled as module as
well.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 8 Mar 2021 18:35:14 +0000 (19:35 +0100)]
drm/radeon: also init GEM funcs in radeon_gem_prime_import_sg_table
Otherwise we will run into a NULL ptr deref.
Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=212137 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.11.x
Kenneth Feng [Tue, 9 Mar 2021 13:10:16 +0000 (21:10 +0800)]
drm/amd/pm: bug fix for pcie dpm
Currently the pcie dpm has two problems.
1. Only the high dpm level speed/width can be overrided
if the requested values are out of the pcie capability.
2. The high dpm level is always overrided though sometimes
it's not necesarry.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Nirmoy Das [Mon, 8 Mar 2021 14:22:22 +0000 (15:22 +0100)]
drm/amdgpu: fb BO should be ttm_bo_type_device
FB BO should not be ttm_bo_type_kernel type and
amdgpufb_create_pinned_object() pins the FB BO anyway.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhan Liu [Tue, 9 Mar 2021 01:28:22 +0000 (20:28 -0500)]
drm/amdgpu/display: Use wm_table.entries for dcn301 calculate_wm
[Why]
For DGPU Navi, the wm_table.nv_entries are used. These entires are not
populated for DCN301 Vangogh APU, but instead wm_table.entries are.
[How]
Use DCN21 Renoir style wm calculations.
Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Fri, 19 Feb 2021 23:15:30 +0000 (18:15 -0500)]
drm/amd/display: Enabled pipe harvesting in dcn30
[Why & How]
Ported logic from dcn21 for reading in pipe fusing to dcn30.
Supported configurations are 1 and 6 pipes. Invalid fusing
will revert to 1 pipe being enabled.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sung Lee [Fri, 26 Feb 2021 18:20:43 +0000 (13:20 -0500)]
drm/amd/display: Revert dram_clock_change_latency for DCN2.1
[WHY & HOW]
Using values provided by DF for latency may cause hangs in
multi display configurations. Revert change to previous value.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Wed, 10 Mar 2021 21:15:16 +0000 (13:15 -0800)]
Merge tag 's390-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix various user space visible copy_to_user() instances which return
the number of bytes left to copy instead of -EFAULT
- make TMPFS_INODE64 available again for s390 and alpha, now that both
architectures have been switched to 64-bit ino_t (see commit 96c0a6a72d18: "s390,alpha: switch to 64-bit ino_t")
- make sure to release a shared hypervisor resource within the zcore
device driver also on restart and power down; also remove unneeded
surrounding debugfs_create return value checks
- for the new hardware counter set device driver rename the uapi header
file to be a bit more generic; also remove 60 second read limit which
is not really necessary and without the limit the interface can be
easier tested
- some small cleanups, the largest being to convert all long long in
our time and idle code to longs
- update defconfigs
* tag 's390-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: remove IBM_PARTITION and CONFIGFS_FS from zfcpdump defconfig
s390: update defconfigs
s390,alpha: make TMPFS_INODE64 available again
s390/cio: return -EFAULT if copy_to_user() fails
s390/tty3270: avoid comma separated statements
s390/cpumf: remove unneeded semicolon
s390/crypto: return -EFAULT if copy_to_user() fails
s390/cio: return -EFAULT if copy_to_user() fails
s390/cpumf: rename header file to hwctrset.h
s390/zcore: release dump save area on restart or power down
s390/zcore: no need to check return value of debugfs_create functions
s390/cpumf: remove 60 seconds read limit
s390/topology: remove always false if check
s390/time,idle: get rid of unsigned long long
drm/amdgpu/display: use GFP_ATOMIC in dcn21_validate_bandwidth_fp()
After fixing nested FPU contexts caused by 41401ac67791 we're still seeing
complaints about spurious kernel_fpu_end(). As it turns out this was
already fixed for dcn20 in commit f41ed88cbd ("drm/amdgpu/display:
use GFP_ATOMIC in dcn20_validate_bandwidth_internal") but never moved
forward to dcn21.
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
drm/amd/display: Fix nested FPU context in dcn21_validate_bandwidth()
Commit 41401ac67791 added FPU wrappers to dcn21_validate_bandwidth(),
which was correct. Unfortunately a nested function alredy contained
DC_FP_START()/DC_FP_END() calls, which results in nested FPU context
enter/exit and complaints by kernel_fpu_begin_mask().
This can be observed e.g. with 5.10.20, which backported 41401ac67791
and now emits the following warning on boot:
The warning is emitted due to the additional DC_FP_START/END calls in
patch_bounding_box(), which is inlined into dcn21_calculate_wm(),
its only caller. Removing the calls brings the code in line with
dcn20 and makes the warning disappear.
Fixes: 41401ac67791 ("drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()") Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Takashi Iwai [Wed, 3 Feb 2021 12:42:41 +0000 (13:42 +0100)]
drm/amd/display: Add a backlight module option
There seem devices that don't work with the aux channel backlight
control. For allowing such users to test with the other backlight
control method, provide a new module option, aux_backlight, to specify
enabling or disabling the aux backport support explicitly. As
default, the aux support is detected by the hardware capability.
v2: make the backlight option generic in case we add future
backlight types (Alex)
The kernel test robot reports a huge performance regression due to the
commit, and the reason seems fairly straightforward: when there is
contention on the page list (which is what causes acquire_slab() to
fail), we do _not_ want to just loop and try again, because that will
transfer the contention to the 'n->list_lock' spinlock we hold, and
just make things even worse.
This is admittedly likely a problem only on big machines - the kernel
test robot report comes from a 96-thread dual socket Intel Xeon Gold
6252 setup, but the regression there really is quite noticeable:
-47.9% regression of stress-ng.rawpkt.ops_per_sec
and the commit that was marked as being fixed (7ced37197196: "slub:
Acquire_slab() avoid loop") actually did the loop exit early very
intentionally (the hint being that "avoid loop" part of that commit
message), exactly to avoid this issue.
The correct thing to do may be to pick some kind of reasonable middle
ground: instead of breaking out of the loop on the very first sign of
contention, or trying over and over and over again, the right thing may
be to re-try _once_, and then give up on the second failure (or pick
your favorite value for "once"..).
Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/ Cc: Jann Horn <jannh@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 10 Mar 2021 18:01:35 +0000 (10:01 -0800)]
Merge tag 'for-linus-2021-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull detached mounts fix from Christian Brauner:
"Creating a series of detached mounts, attaching them to the
filesystem, and unmounting them can be used to trigger an integer
overflow in ns->mounts causing the kernel to block any new mounts in
count_mounts() and returning ENOSPC because it falsely assumes that
the maximum number of mounts in the mount namespace has been reached,
i.e. it thinks it can't fit the new mounts into the mount namespace
anymore.
Without this fix heavy use of the new mount API with move_mount() will
cause the host to become unuseable and thus blocks some xfstest
patches I want to resend.
Depending on the number of mounts in your system, this can be
reproduced on any kernel that supportes open_tree() and move_mount().
A reproducer has been sent for inclusion with xfstests. It takes care
to do this in another mount namespace, not in the host's mount
namespace so there shouldn't be any risk in running it but if one did
run it on the host it would require a reboot in order to be able to
mount again. See
The root cause of this is that detached mounts aren't handled
correctly when source and target mount are identical and reside on a
shared mount causing a broken mount tree where the detached source
itself is propagated which propagation prevents for regular
bind-mounts and new mounts.
This ultimately leads to a miscalculation of the number of mounts in
the mount namespace.
Detached mounts created via 'open_tree(fd, path, OPEN_TREE_CLONE)' are
essentially like an unattached bind-mount. They can then later on be
attached to the filesystem via move_mount() which calls into
attach_recursive_mount().
Part of attaching it to the filesystem is making sure that mounts get
correctly propagated in case the destination mountpoint is MS_SHARED,
i.e. is a shared mountpoint. This is done by calling into
propagate_mnt() which walks the list of peers calling propagate_one()
on each mount in this list making sure it receives the propagation
event. The propagate_one() function thereby skips both new mounts and
bind mounts to not propagate them "into themselves". Both are
identified by checking whether the mount is already attached to any
mount namespace in mnt->mnt_ns. The is what the IS_MNT_NEW() helper is
responsible for.
However, detached mounts have an anonymous mount namespace attached to
them stashed in mnt->mnt_ns which means that IS_MNT_NEW() doesn't
realize they need to be skipped causing the mount to propagate "into
itself" breaking the mount table and causing a disconnect between the
number of mounts recorded as being beneath or reachable from the
target mountpoint and the number of mounts actually recorded/counted
in ns->mounts ultimately causing an overflow which in turn prevents
any new mounts via the ENOSPC issue.
So teach propagation to handle detached mounts by making it aware of
them. I've been tracking this issue down for the last couple of days
and then verifying that the fix is correct by unmounting everything in
my current mount table leaving only /proc and /sys mounted and running
the reproducer above overnight verifying the number of mounts counted
in ns->mounts. With this fix the counts are correct and the ENOSPC
issue can't be reproduced.
This change will only have an effect on mounts created with the new
mount API since detached mounts cannot be created with the old mount
API so regressions are extremely unlikely.
* tag 'for-linus-2021-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mount: fix mounting of detached mounts onto targets that reside on shared mounts
Linus Torvalds [Wed, 10 Mar 2021 17:55:06 +0000 (09:55 -0800)]
Merge tag '5.12-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Six cifs/smb3 fixes, three of them for stable, including some
important mulitchannel crediting fixes, and a fix for statfs error
handling"
* tag '5.12-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not send close in compound create+close requests
cifs: return proper error code in statfs(2)
cifs: change noisy error message to FYI
cifs: print MIDs in decimal notation
cifs: ask for more credit on async read/write code paths
cifs: fix credit accounting for extra channel
Juergen Gross [Sat, 6 Mar 2021 16:18:31 +0000 (17:18 +0100)]
xen/events: reset affinity of 2-level event when tearing it down
When creating a new event channel with 2-level events the affinity
needs to be reset initially in order to avoid using an old affinity
from earlier usage of the event channel port. So when tearing an event
channel down reset all affinity bits.
The same applies to the affinity when onlining a vcpu: all old
affinity settings for this vcpu must be reset. As percpu events get
initialized before the percpu event channel hook is called,
resetting of the affinities happens after offlining a vcpu (this is
working, as initial percpu memory is zeroed out).
Wei Yongjun [Fri, 5 Mar 2021 03:49:30 +0000 (03:49 +0000)]
regulator: rt4831: Fix return value check in rt4831_regulator_probe()
In case of error, the function dev_get_regmap() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Fixes: 9351ab8b0cb6 ("regulator: rt4831: Adds support for Richtek RT4831 DSV regulator") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210305034930.3236099-1-weiyongjun1@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
Frieder Schrempf [Mon, 22 Feb 2021 11:52:20 +0000 (12:52 +0100)]
regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
projects / thirdparty / kernel / linux.git / log
