Peter Maydell [Fri, 16 Aug 2019 15:43:46 +0000 (16:43 +0100)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests
# gpg: Signature made Fri 16 Aug 2019 10:29:18 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Handle undetectable alignment
qemu-img convert: Deprecate using -n and -o together
block-backend: Queue requests while drained
mirror: Keep mirror_top_bs drained after dropping permissions
block: Remove blk_pread_unthrottled()
iotests: Add test for concurrent stream/commit
tests: Test mid-drain bdrv_replace_child_noperm()
tests: Test polling in bdrv_drop_intermediate()
block: Reduce (un)drains when replacing a child
block: Keep subtree drained in drop_intermediate
block: Simplify bdrv_filter_default_perms()
iotests: Test migration with all kinds of filter nodes
iotests: Move migration helpers to iotests.py
iotests/118: Add -blockdev based tests
iotests/118: Create test classes dynamically
iotests/118: Test media change for scsi-cd
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Aug 2019 14:53:37 +0000 (15:53 +0100)]
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-08-15' into staging
nbd patches for 2019-08-15
- Addition of InetSocketAddress keep-alive
- Addition of BDRV_REQ_PREFETCH for more efficient copy-on-read
- Initial refactoring in preparation of NBD reconnect
# gpg: Signature made Thu 15 Aug 2019 19:28:41 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-08-15:
block/nbd: refactor nbd connection parameters
block/nbd: add cmdline and qapi parameter reconnect-delay
block/nbd: move from quit to state
block/nbd: use non-blocking io channel for nbd negotiation
block/nbd: split connection_co start out of nbd_client_connect
nbd: improve CMD_CACHE: use BDRV_REQ_PREFETCH
block/stream: use BDRV_REQ_PREFETCH
block: implement BDRV_REQ_PREFETCH
qapi: Add InetSocketAddress member keep-alive
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Aug 2019 13:53:43 +0000 (14:53 +0100)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging
Header cleanup patches for 2019-08-13
# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 16 Aug 2019 12:58:41 +0000 (13:58 +0100)]
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-08-15' into staging
- Fix for ctrl queue in the virtio-net QOS driver
- Improve Valgrind reports in the tests that use the null-co driver
- Get rid of global_qtest related code in libqtest and libqos
* remotes/huth-gitlab/tags/pull-request-2019-08-15:
tests/libqtest: Make qmp_assert_success() independent from global_qtest
tests/libqtest: Make qtest_qmp_device_add/del independent from global_qtest
tests/libqtest: Clean up qtest_cb_for_every_machine() wrt global_qtest
tests/libqtest: Remove unused function hmp()
tests/libqos: Make virtio-pci code independent from global_qtest
tests/libqos: Make generic virtio code independent from global_qtest
tests: Set read-zeroes on for null-co driver
libqos: Account for the ctrl queue in virtio-net
qtest: Rename qtest.c:qtest_init()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).
Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry. Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there. Drop the now
superfluous includes of sysemu/sysemu.h from headers.
Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()". This is a bad idea:
hw/qdev-core.h is widely included.
Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.
Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800. A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.
Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
hw/boards.h pulls in almost 60 headers. The less we include it into
headers, the better. As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed. Gets rid of just
one inclusion into a header.
Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
hw/hw.h used to include headers hardware emulation "usually" needs.
The previous commits removed all but one of them, to good effect.
Only qom/object.h is left. Remove that one, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-18-armbru@redhat.com>
Drop unnecessary inclusions from headers. Downgrade a few more to
exec/hwaddr.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
migration: Move the VMStateDescription typedef to typedefs.h
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me. However, the next commit will drop
migration/vmstate.h from a massive number of compiles. Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
migration/qemu-file.h neglects to include it even though it needs
ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-14-armbru@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
ide: Include hw/ide/internal a bit less outside hw/ide/
According to hw/ide/internal's file comment, only files in hw/ide/ are
supposed to include it. Drag reality slightly closer to supposition.
Three includes outside hw/ide remain: hw/arm/sbsa-ref.c,
include/hw/ide/pci.h, and include/hw/misc/macio/macio.h. Turns out
board code needs ide-internal.h to wire up IDE stuff. More cleanup is
needed. Left for another day.
Cc: John Snow <jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-11-armbru@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
The main culprit is hw/hw.h, which supposedly includes it for
convenience.
Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
trace: Do not include qom/cpu.h into generated trace.h
docs/devel/tracing.txt explains "since many source files include
trace.h, [the generated trace.h use] a minimum of types and other
header files included to keep the namespace clean and compile times
and dependencies down."
Commit 4815185902 "trace: Add per-vCPU tracing states for events with
the 'vcpu' property" made them all include qom/cpu.h via
control-internal.h. qom/cpu.h in turn includes about thirty headers.
Ouch.
Per-vCPU tracing is currently not supported in sub-directories'
trace-events. In other words, qom/cpu.h can only be used in
trace-root.h, not in any trace.h.
Split trace/control-vcpu.h off trace/control.h and
trace/control-internal.h. Have the generated trace.h include
trace/control.h (which no longer includes qom/cpu.h), and trace-root.h
include trace/control-vcpu.h (which includes it).
The resulting improvement is a bit disappointing: in my "build
everything" tree, some 1100 out of 6600 objects (not counting tests
and objects that don't depend on qemu/osdep.h) depend on a trace.h,
and about 600 of them no longer depend on qom/cpu.h. But more than
1300 others depend on trace-root.h. More work is clearly needed.
Left for another day.
Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-8-armbru@redhat.com>
hw/tpm/trace-events uses TARGET_FMT_plx formats with uint64_t
arguments. That's wrong, TARGET_FMT_plx takes hwaddr. Since hwaddr
happens to be uint64_t, it works anyway. Messed up in commit ec427498da5, v2.12.0. Clean up by replacing TARGET_FMT_plx with its
macro expansion.
scripts/tracetool/format/log_stap.py (commit 62dd1048c0b, v4.0.0) has
a special case for TARGET_FMT_plx. Delete it.
Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-7-armbru@redhat.com>
When commit 5f7d05ecfda added QLIST_INSERT_HEAD_RCU() to qemu/queue.h,
it had to include qemu/atomic.h. Commit 341774fe6cc removed
QLIST_INSERT_HEAD_RCU() again, but neglected to remove the #include.
Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190812052359.30071-6-armbru@redhat.com>
memory: Fix type of IOMMUMemoryRegionClass member @parent_class
TYPE_IOMMU_MEMORY_REGION is a direct subtype of TYPE_MEMORY_REGION.
Its instance struct is IOMMUMemoryRegion, and its first member is a
MemoryRegion. Correct. Its class struct is IOMMUMemoryRegionClass,
and its first member is a DeviceClass. Wrong. Messed up when commit 1221a474676 introduced the QOM type. It even included hw/qdev-core.h
just for that.
TYPE_MEMORY_REGION doesn't bother to define a class struct. This is
fine, it simply defaults to its super-type TYPE_OBJECT's class struct
ObjectClass. Changing IOMMUMemoryRegionClass's first member's type to
ObjectClass would be a minimal fix, if a bit brittle: if
TYPE_MEMORY_REGION ever acquired own class struct, we'd have to update
IOMMUMemoryRegionClass to use it.
Fix it the clean and robust way instead: give TYPE_MEMORY_REGION its
own class struct MemoryRegionClass now, and use it for
IOMMUMemoryRegionClass's first member.
Revert the include of hw/qdev-core.h, and fix the few files that have
come to rely on it.
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190812052359.30071-5-armbru@redhat.com>
In my "build everything" tree, changing a type in qapi/common.json
triggers a recompile of some 3600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
One common dependency is QapiErrorClass: it's used only in in
qapi/error.h, which uses nothing else, and is widely included.
Move QapiErrorClass from common.json to new error.json. Touching
common.json now recompiles only some 2900 objects.
Cc: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-4-armbru@redhat.com>
Some of the generated qapi-types-MODULE.h are included all over the
place. Changing a QAPI type can trigger massive recompiling. Top
scorers recompile more than 1000 out of some 6600 objects (not
counting tests and objects that don't depend on qemu/osdep.h):
Clean up headers to include generated QAPI headers only where needed.
Impact is negligible except for hw/qdev-properties.h.
This header includes qapi/qapi-types-block.h and
qapi/qapi-types-misc.h. They are used only in expansions of property
definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and
DEFINE_PROP_OFF_AUTO(). Moving their inclusion from
hw/qdev-properties.h to the users of these macros avoids pointless
recompiles. This is how other property definition macros, such as
DEFINE_PROP_NETDEV(), already work.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-3-armbru@redhat.com>
Back in 2016, we discussed[1] rules for headers, and these were
generally liked:
1. Have a carefully curated header that's included everywhere first. We
got that already thanks to Peter: osdep.h.
2. Headers should normally include everything they need beyond osdep.h.
If exceptions are needed for some reason, they must be documented in
the header. If all that's needed from a header is typedefs, put
those into qemu/typedefs.h instead of including the header.
3. Cyclic inclusion is forbidden.
This patch gets include/ closer to obeying 2.
It's actually extracted from my "[RFC] Baby steps towards saner
headers" series[2], which demonstrates a possible path towards
checking 2 automatically. It passes the RFC test there.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Peter Maydell [Fri, 16 Aug 2019 11:00:18 +0000 (12:00 +0100)]
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190814a' into staging
Migration pull 2019-08-15
Marcel's vmxnet3 live migraiton fix (that breaks vmxnet3 compatibility
but makes it work)
Error description improvements from Yury.
Multifd fixes from Ivan and Juan.
A load of small cleanups from Wei.
A small cleanup from Marc-André for a future patch.
# gpg: Signature made Wed 14 Aug 2019 19:00:39 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190814a: (33 commits)
migration: add some multifd traces
migration: Make global sem_sync semaphore by channel
migration: Add traces for multifd terminate threads
qemu-file: move qemu_{get,put}_counted_string() declarations
migration/postcopy: use mis->bh instead of allocating a QEMUBH
migration: rename migration_bitmap_sync_range to ramblock_sync_dirty_bitmap
migration: update ram_counters for multifd sync packet
migration: add speed limit for multifd migration
migration: add qemu_file_update_transfer interface
migration: always initialise ram_counters for a new migration
migration: remove unused field bytes_xfer
hmp: Remove migration capabilities from "info migrate"
migration/postcopy: use QEMU_IS_ALIGNED to replace host_offset
migration/postcopy: simplify calculation of run_start and fixup_start_addr
migration/postcopy: make PostcopyDiscardState a static variable
migration: extract ram_load_precopy
migration: return -EINVAL directly when version_id mismatch
migration: equation is more proper than and to check LOADVM_QUIT
migration: just pass RAMBlock is enough
migration: use migration_in_postcopy() to check POSTCOPY_ACTIVE
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nir Soffer [Tue, 13 Aug 2019 18:21:03 +0000 (21:21 +0300)]
file-posix: Handle undetectable alignment
In some cases buf_align or request_alignment cannot be detected:
1. With Gluster, buf_align cannot be detected since the actual I/O is
done on Gluster server, and qemu buffer alignment does not matter.
Since we don't have alignment requirement, buf_align=1 is the best
value.
2. With local XFS filesystem, buf_align cannot be detected if reading
from unallocated area. In this we must align the buffer, but we don't
know what is the correct size. Using the wrong alignment results in
I/O error.
3. With Gluster backed by XFS, request_alignment cannot be detected if
reading from unallocated area. In this case we need to use the
correct alignment, and failing to do so results in I/O errors.
4. With NFS, the server does not use direct I/O, so both buf_align cannot
be detected. In this case we don't need any alignment so we can use
buf_align=1 and request_alignment=1.
These cases seems to work when storage sector size is 512 bytes, because
the current code starts checking align=512. If the check succeeds
because alignment cannot be detected we use 512. But this does not work
for storage with 4k sector size.
To determine if we can detect the alignment, we probe first with
align=1. If probing succeeds, maybe there are no alignment requirement
(cases 1, 4) or we are probing unallocated area (cases 2, 3). Since we
don't have any way to tell, we treat this as undetectable alignment. If
probing with align=1 fails with EINVAL, but probing with one of the
expected alignments succeeds, we know that we found a working alignment.
Practically the alignment requirements are the same for buffer
alignment, buffer length, and offset in file. So in case we cannot
detect buf_align, we can use request alignment. If we cannot detect
request alignment, we can fallback to a safe value. To use this logic,
we probe first request alignment instead of buf_align.
Here is a table showing the behaviour with current code (the value in
parenthesis is the optimal value).
Case Sector buf_align (opt) request_alignment (opt) result
======================================================================
1 512 512 (1) 512 (512) OK
1 4096 512 (1) 4096 (4096) FAIL
----------------------------------------------------------------------
2 512 512 (512) 512 (512) OK
2 4096 512 (4096) 4096 (4096) FAIL
----------------------------------------------------------------------
3 512 512 (1) 512 (512) OK
3 4096 512 (1) 512 (4096) FAIL
----------------------------------------------------------------------
4 512 512 (1) 512 (1) OK
4 4096 512 (1) 512 (1) OK
Same cases with this change:
Case Sector buf_align (opt) request_alignment (opt) result
======================================================================
1 512 512 (1) 512 (512) OK
1 4096 4096 (1) 4096 (4096) OK
----------------------------------------------------------------------
2 512 512 (512) 512 (512) OK
2 4096 4096 (4096) 4096 (4096) OK
----------------------------------------------------------------------
3 512 4096 (1) 4096 (512) OK
3 4096 4096 (1) 4096 (4096) OK
----------------------------------------------------------------------
4 512 4096 (1) 4096 (1) OK
4 4096 4096 (1) 4096 (1) OK
I tested that provisioning VMs and copying disks on local XFS and
Gluster with 4k bytes sector size work now, resolving bugs [1],[2].
I tested also on XFS, NFS, Gluster with 512 bytes sector size.
Kevin Wolf [Fri, 9 Aug 2019 09:09:21 +0000 (11:09 +0200)]
qemu-img convert: Deprecate using -n and -o together
bdrv_create options specified with -o have no effect when skipping image
creation with -n, so this doesn't make sense. Warn against the misuse
and deprecate the combination so we can make it a hard error later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Mon, 22 Jul 2019 15:46:23 +0000 (17:46 +0200)]
block-backend: Queue requests while drained
This fixes devices like IDE that can still start new requests from I/O
handlers in the CPU thread while the block backend is drained.
The basic assumption is that in a drain section, no new requests should
be allowed through a BlockBackend (blk_drained_begin/end don't exist,
we get drain sections only on the node level). However, there are two
special cases where requests should not be queued:
1. Block jobs: We already make sure that block jobs are paused in a
drain section, so they won't start new requests. However, if the
drain_begin is called on the job's BlockBackend first, it can happen
that we deadlock because the job stays busy until it reaches a pause
point - which it can't if its requests aren't processed any more.
The proper solution here would be to make all requests through the
job's filter node instead of using a BlockBackend. For now, just
disabling request queuing on the job BlockBackend is simpler.
2. In test cases where making requests through bdrv_* would be
cumbersome because we'd need a BdrvChild. As we already got the
functionality to disable request queuing from 1., use it in tests,
too, for convenience.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Mon, 22 Jul 2019 15:44:27 +0000 (17:44 +0200)]
mirror: Keep mirror_top_bs drained after dropping permissions
mirror_top_bs is currently implicitly drained through its connection to
the source or the target node. However, the drain section for target_bs
ends early after moving mirror_top_bs from src to target_bs, so that
requests can already be restarted while mirror_top_bs is still present
in the chain, but has dropped all permissions and therefore runs into an
assertion failure like this:
Kevin Wolf [Mon, 22 Jul 2019 15:22:00 +0000 (17:22 +0200)]
block: Remove blk_pread_unthrottled()
The functionality offered by blk_pread_unthrottled() goes back to commit 498e386c584. Then, we couldn't perform I/O throttling with synchronous
requests because timers wouldn't be executed in polling loops. So the
commit automatically disabled I/O throttling as soon as a synchronous
request was issued.
However, for geometry detection during disk initialisation, we always
used (and still use) synchronous requests even if guest requests use AIO
later. Geometry detection was not wanted to disable I/O throttling, so
bdrv_pread_unthrottled() was introduced which disabled throttling only
temporarily.
All of this isn't necessary any more because we do run timers in polling
loop and even synchronous requests are now using coroutine
infrastructure internally. For this reason, commit 90c78624f already
removed the automatic disabling of I/O throttling.
It's time to get rid of the workaround for the removed code, and its
abuse of blk_root_drained_begin()/end(), as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Max Reitz [Mon, 22 Jul 2019 13:33:44 +0000 (15:33 +0200)]
block: Reduce (un)drains when replacing a child
Currently, bdrv_replace_child_noperm() undrains the parent until it is
completely undrained, then re-drains it after attaching the new child
node.
This is a problem with bdrv_drop_intermediate(): We want to keep the
whole subtree drained, including parents, while the operation is
under way. bdrv_replace_child_noperm() breaks this by allowing every
parent to become unquiesced briefly, and then redraining it.
In fact, there is no reason why the parent should become unquiesced and
be allowed to submit requests to the new child node if that new node is
supposed to be kept drained. So if anything, we have to drain the
parent before detaching the old child node. Conversely, we have to
undrain it only after attaching the new child node.
Thus, change the whole drain algorithm here: Calculate the number of
times we have to drain/undrain the parent before replacing the child
node then drain it (if necessary), replace the child node, and then
undrain it.
Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Mon, 22 Jul 2019 13:33:43 +0000 (15:33 +0200)]
block: Keep subtree drained in drop_intermediate
bdrv_drop_intermediate() calls BdrvChildRole.update_filename(). That
may poll, thus changing the graph, which potentially breaks the
QLIST_FOREACH_SAFE() loop.
Just keep the whole subtree drained. This is probably the right thing
to do anyway (dropping nodes while the subtree is not drained seems
wrong).
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 2 Aug 2019 13:59:41 +0000 (15:59 +0200)]
block: Simplify bdrv_filter_default_perms()
The same change as commit 2b23f28639 ('block/copy-on-read: Fix
permissions for inactive node') made for the copy-on-read driver can be
made for bdrv_filter_default_perms(): Retaining the old permissions from
the BdrvChild if it is given complicates things unnecessarily when in
the end this only means that the options set in the c == NULL case (i.e.
during child creation) are retained.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Thu, 1 Aug 2019 15:12:25 +0000 (17:12 +0200)]
iotests: Test migration with all kinds of filter nodes
This test case is motivated by commit 2b23f28639 ('block/copy-on-read:
Fix permissions for inactive node'). Instead of just testing
copy-on-read on migration, let's stack all sorts of filter nodes on top
of each other and try if the resulting VM can still migrate
successfully. For good measure, put everything into an iothread, because
why not?
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Tue, 30 Jul 2019 14:49:26 +0000 (16:49 +0200)]
iotests/118: Add -blockdev based tests
The code path for -device drive=<node-name> or without a drive=...
option for empty drives, which is supposed to be used with -blockdev
differs enough from the -drive based path with a user-owned
BlockBackend, so we want to test both paths at least for the basic tests
implemented by TestInitiallyFilled and TestInitiallyEmpty.
This would have caught the bug recently fixed for inserting read-only
nodes into a scsi-cd created without a drive=... option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Kevin Wolf [Tue, 30 Jul 2019 14:25:55 +0000 (16:25 +0200)]
iotests/118: Create test classes dynamically
We're getting a ridiculous number of child classes of
TestInitiallyFilled and TestInitiallyEmpty that differ only in a few
attributes that we want to test in all combinations.
Instead of explicitly writing down every combination, let's use a loop
and create those classes dynamically.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
We'll need some connection parameters to be available all the time to
implement nbd reconnect. So, let's refactor them: define additional
parameters in BDRVNBDState, drop them from function parameters, drop
nbd_client_init and separate options parsing instead from nbd_open.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190618114328.55249-6-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Drop useless 'if' before object_unref] Signed-off-by: Eric Blake <eblake@redhat.com>
block/nbd: add cmdline and qapi parameter reconnect-delay
Reconnect will be implemented in the following commit, so for now,
in semantics below, disconnect itself is a "serious error".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-5-vsementsov@virtuozzo.com>
[eblake: slipped from 4.1 to 4.2] Signed-off-by: Eric Blake <eblake@redhat.com>
To implement reconnect we need several states for the client:
CONNECTED, QUIT and two different CONNECTING states. CONNECTING states
will be added in the following patches. This patch implements CONNECTED
and QUIT.
QUIT means, that we should close the connection and fail all current
and further requests (like old quit = true).
CONNECTED means that connection is ok, we can send requests (like old
quit = false).
For receiving loop we use a comparison of the current state with QUIT,
because reconnect will be in the same loop, so it should be looping
until the end.
Opposite, for requests we use a comparison of the current state with
CONNECTED, as we don't want to send requests in future CONNECTING
states.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-4-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
block/nbd: use non-blocking io channel for nbd negotiation
No reason to use blocking channel for negotiation and we'll benefit in
further reconnect feature, as qio_channel reads and writes will do
qemu_coroutine_yield while waiting for io completion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-3-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
block/nbd: split connection_co start out of nbd_client_connect
nbd_client_connect is going to be used from connection_co, so, let's
refactor nbd_client_connect in advance, leaving io channel
configuration all in nbd_client_connect.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-2-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
This helps to avoid extra io, allocations and memory copying.
We assume here that CMD_CACHE is always used with copy-on-read, as
otherwise it's a noop.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190725100550.33801-4-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
It's needed to provide keepalive for nbd client to track server
availability.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190725094937.32454-1-vsementsov@virtuozzo.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
[eblake: Fix error message typo] Signed-off-by: Eric Blake <eblake@redhat.com>
Thomas Huth [Tue, 23 Jul 2019 19:22:39 +0000 (21:22 +0200)]
tests/libqtest: Make qmp_assert_success() independent from global_qtest
The normal libqtest library functions should never depend on global_qtest.
Pass in the test state via parameter instead. And while we're at it,
also rename this function to qtest_qmp_assert_success() to make it clear
that it is part of libqtest.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190813093047.27948-7-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 22 Jul 2019 15:10:55 +0000 (17:10 +0200)]
tests/libqtest: Make qtest_qmp_device_add/del independent from global_qtest
Generic library functions like qtest_qmp_device_add() and _del()
should not depend on the global_qtest variable. Pass the test
state via parameter instead.
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190813093047.27948-6-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 22 Jul 2019 14:34:42 +0000 (16:34 +0200)]
tests/libqtest: Clean up qtest_cb_for_every_machine() wrt global_qtest
The generic libqtest library functions should not use functions that
require the global_qtest variable.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190813093047.27948-5-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Mon, 22 Jul 2019 14:17:38 +0000 (16:17 +0200)]
tests/libqtest: Remove unused function hmp()
No test is using hmp() anymore, and since this function uses the disliked
global_qtest variable, we should also make sure that nobody adds new code
with this function again. qtest_hmp() should be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190813093047.27948-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Thu, 18 Jul 2019 15:08:51 +0000 (17:08 +0200)]
tests/libqos: Make virtio-pci code independent from global_qtest
The libqos library functions should never depend on global_qtest,
since these functions might be used in tests that track multiple
test states. So let's use the test state of the QPCIDevice instead.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190813093047.27948-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Sat, 18 May 2019 08:23:24 +0000 (10:23 +0200)]
tests/libqos: Make generic virtio code independent from global_qtest
The libqos library functions should never depend on global_qtest,
since these functions might be used in tests that track multiple
test states. Pass around a pointer to the QTestState instead.
Message-Id: <20190814195920.32023-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch is to reduce the number of Valgrind report messages about
using uninitialized memory with the null-co driver. It helps to filter
real memory issues and is the same work done for the iotests with the
commit ID a6862418fec4072.
Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1564404360-733987-1-git-send-email-andrey.shinkevich@virtuozzo.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Both the qtest client, libqtest.c, and server, qtest.c, used the same
name for initialization functions which can cause confusion.
Signed-off-by: Alexander Oleinik <alxndr@bu.edu>
Message-Id: <20190805031240.6024-1-alxndr@bu.edu> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Juan Quintela [Wed, 14 Aug 2019 02:02:17 +0000 (04:02 +0200)]
migration: add some multifd traces
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-6-quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Juan Quintela [Wed, 14 Aug 2019 02:02:14 +0000 (04:02 +0200)]
migration: Make global sem_sync semaphore by channel
This makes easy to debug things because when you want for all threads
to arrive at that semaphore, you know which one your are waiting for.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-3-quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Juan Quintela [Wed, 14 Aug 2019 02:02:13 +0000 (04:02 +0200)]
migration: Add traces for multifd terminate threads
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-2-quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move migration helpers for strings under include/, so they can be used
outside of migration/
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190808150325.21939-2-marcandre.lureau@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Mon, 5 Aug 2019 05:31:46 +0000 (13:31 +0800)]
migration/postcopy: use mis->bh instead of allocating a QEMUBH
For migration incoming side, it either quit in precopy or postcopy. It
is safe to use the mis->bh for both instead of allocating a dedicated
QEMUBH for postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190805053146.32326-1-richardw.yang@linux.intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 8 Aug 2019 03:31:55 +0000 (11:31 +0800)]
migration: rename migration_bitmap_sync_range to ramblock_sync_dirty_bitmap
Rename for better understanding of the code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190808033155.30162-1-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Ivan Ren [Tue, 30 Jul 2019 05:33:36 +0000 (13:33 +0800)]
migration: update ram_counters for multifd sync packet
Multifd sync will send MULTIFD_FLAG_SYNC flag info to destination, add
these bytes to ram_counters record.
Signed-off-by: Ivan Ren <ivanren@tencent.com> Suggested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1564464816-21804-4-git-send-email-ivanren@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Ivan Ren [Tue, 30 Jul 2019 05:33:35 +0000 (13:33 +0800)]
migration: add speed limit for multifd migration
Limit the speed of multifd migration through common speed limitation
qemu file.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Message-Id: <1564464816-21804-3-git-send-email-ivanren@tencent.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add qemu_file_update_transfer for just update bytes_xfer for speed
limitation. This will be used for further migration feature such as
multifd migration.
Signed-off-by: Ivan Ren <ivanren@tencent.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1564464816-21804-2-git-send-email-ivanren@tencent.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Ivan Ren [Fri, 2 Aug 2019 10:18:41 +0000 (18:18 +0800)]
migration: always initialise ram_counters for a new migration
This patch fix a multifd migration bug in migration speed calculation, this
problem can be reproduced as follows:
1. start a vm and give a heavy memory write stress to prevent the vm be
successfully migrated to destination
2. begin a migration with multifd
3. migrate for a long time [actually, this can be measured by transferred bytes]
4. migrate cancel
5. begin a new migration with multifd, the migration will directly run into
migration_completion phase
Reason as follows:
Migration update bandwidth and s->threshold_size in function
migration_update_counters after BUFFER_DELAY time:
In multifd migration, migration_total_bytes function return
qemu_ftell(s->to_dst_file) + ram_counters.multifd_bytes.
s->iteration_initial_bytes will be initialized to 0 at every new migration,
but ram_counters is a global variable, and history migration data will be
accumulated. So if the ram_counters.multifd_bytes is big enough, it may lead
pending_size >= s->threshold_size become false in migration_iteration_run
after the first migration_update_counters.
Signed-off-by: Ivan Ren <ivanren@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Suggested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1564741121-1840-1-git-send-email-ivanren@tencent.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Tue, 2 Apr 2019 00:31:06 +0000 (08:31 +0800)]
migration: remove unused field bytes_xfer
MigrationState->bytes_xfer is only set to 0 in migrate_init().
Remove this unnecessary field.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190402003106.17614-1-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Tue, 6 Aug 2019 00:36:45 +0000 (08:36 +0800)]
hmp: Remove migration capabilities from "info migrate"
With the growth of migration capabilities, it is not proper to display
them in "info migrate". Users are recommended to use "info
migrate_capabiltiies" to list them.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190806003645.8426-1-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Tue, 6 Aug 2019 00:46:48 +0000 (08:46 +0800)]
migration/postcopy: use QEMU_IS_ALIGNED to replace host_offset
Use QEMU_IS_ALIGNED for the check, it would be more consistent with
other align calculations.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190806004648.8659-3-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
By doing so, run_start always points to the next HostPage to check.
fixup_start_addr always points to the HostPage to discard.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190806004648.8659-2-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, we allocate/deallocate PostcopyDiscardState for each RAMBlock
on sending discard information to destination. This is not necessary and
the same data area could be reused for each RAMBlock.
This patch defines PostcopyDiscardState a static variable. By doing so:
1) avoid memory allocation and deallocation to the system
2) avoid potential failure of memory allocation
3) hide some details for their users
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190724010721.2146-1-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 25 Jul 2019 00:20:23 +0000 (08:20 +0800)]
migration: extract ram_load_precopy
After cleanup, it would be clear to audience there are two cases
ram_load:
* precopy
* postcopy
And it is not necessary to check postcopy_running on each iteration for
precopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190725002023.2335-3-richardw.yang@linux.intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Mon, 22 Jul 2019 07:53:38 +0000 (15:53 +0800)]
migration: return -EINVAL directly when version_id mismatch
It is not reasonable to continue when version_id mismatch.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190722075339.25121-2-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 18 Jul 2019 06:42:57 +0000 (14:42 +0800)]
migration: equation is more proper than and to check LOADVM_QUIT
LOADVM_QUIT allows a command to quit all layers of nested loadvm loops,
while current return value check is not that proper even it works now.
Current return value check "ret & LOADVM_QUIT" would return true if
bit[0] is 1. This would be true when ret is -1 which is used to indicate
an error of handling a command.
Since there is only one place return LOADVM_QUIT and no other
combination of return value, use "ret == LOADVM_QUIT" would be more
proper.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718064257.29218-1-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 18 Jul 2019 01:25:47 +0000 (09:25 +0800)]
migration: just pass RAMBlock is enough
RAMBlock->used_length is always passed to migration_bitmap_sync_range(),
which could be retrieved from RAMBlock.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718012547.16373-1-richardw.yang@linux.intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Fri, 19 Jul 2019 07:11:29 +0000 (15:11 +0800)]
migration: use migration_in_postcopy() to check POSTCOPY_ACTIVE
Use common helper function to check the state.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190719071129.11880-1-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 18 Jul 2019 08:37:47 +0000 (16:37 +0800)]
migration/postcopy: start_postcopy could be true only when migrate_postcopy() return true
There is only one place to set start_postcopy to true,
qmp_migrate_start_postcopy(), which make sure start_postcopy could be
set to true when migrate_postcopy() return true.
So start_postcopy is true implies the other one.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718083747.5859-1-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 11 Jul 2019 08:08:16 +0000 (16:08 +0800)]
migration/postcopy: PostcopyState is already set in loadvm_postcopy_handle_advise()
PostcopyState is already set to ADVISE at the beginning of
loadvm_postcopy_handle_advise().
Remove the redundant set.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190711080816.6405-1-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Tue, 9 Jul 2019 14:09:24 +0000 (22:09 +0800)]
migration/savevm: move non SaveStateEntry condition check out of iteration
in_postcopy and iterable_only are not SaveStateEntry specific, it would
be more proper to check them out of iteration.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-4-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Tue, 9 Jul 2019 14:09:23 +0000 (22:09 +0800)]
migration/savevm: split qemu_savevm_state_complete_precopy() into two parts
This is a preparation patch for further cleanup.
No functional change, just wrap two major part of
qemu_savevm_state_complete_precopy() into function.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-3-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Tue, 9 Jul 2019 14:09:22 +0000 (22:09 +0800)]
migration/savevm: flush file for iterable_only case
It would be proper to flush file even for iterable_only case.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-2-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Wed, 10 Jul 2019 05:08:14 +0000 (13:08 +0800)]
migration/postcopy: do_fixup is true when host_offset is non-zero
This means it is not necessary to spare an extra variable to hold this
condition. Use host_offset directly is fine.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190710050814.31344-3-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Wed, 10 Jul 2019 05:08:13 +0000 (13:08 +0800)]
migration/postcopy: reduce one operation to calculate fixup_start_addr
Use the same way for run_end to calculate run_start, which saves one
operation.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190710050814.31344-2-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 27 Jun 2019 02:08:22 +0000 (10:08 +0800)]
migration/postcopy: discard_length must not be 0
Since we break the loop when there is no more page to discard, we are
sure the following process would find some page to discard.
It is not necessary to check it again.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-4-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 27 Jun 2019 02:08:21 +0000 (10:08 +0800)]
migration/postcopy: break the loop when there is no more page to discard
When one is equal or bigger then end, it means there is no page to
discard. Just break the loop in this case instead of processing it.
No functional change, just refactor it a little.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-3-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wei Yang [Thu, 27 Jun 2019 02:08:20 +0000 (10:08 +0800)]
migration/postcopy: the valid condition is one less then end
If one equals end, it means we have gone through the whole bitmap.
Use a more restrict check to skip a unnecessary condition.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-2-richardw.yang@linux.intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
projects / thirdparty / qemu.git / log
