linter: Build out dummy function to scan the payload

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

linter: Keep a reference to Pakfire

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Use convenience function to open and walk through the archive

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Log the format and compression

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Simplify opening an archive

There is nothing special needed now we clone the file descriptors. So
this is mainly just to make the file sticky.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Fix passing error codes when opening the archive

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Simplify the walk/filter callbacks

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Cleanup loop when searching for files

This mainly removes the ugly label jump.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: cookie: Rename __f to f now that variable is free again

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Streamline opening and reading from the archive

We will now always create a copy of the file descriptor so that we can
independently run mutliple operations on the same archive without
breaking anything.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Fetch the writer only once

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Move extraction code back to where it belongs

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Remove unnecessary underscores from functions

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Minor code cleanups

No functional changes.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

build: Lint the archives after build

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

linter: Check if package name contains whitespace

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

linter: Add result callback to print to the CLI

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

linter: Make this entirely private

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

linter: Store any results

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

cli: pakfire-builder: Add command to call the linter

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

linter: Base this on archives rather than packages

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pty: Hack to avoid lock-up when we don't have a newline

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

jail: Create helper function to capture output

That way, we can have the length as an extra argument.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: Have pipe return an error if it could not write

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pty: Replace any CRNL with NL when capturing the output

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pty: Configure like SSH does it

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

jail: Immediately send SIGKILL when the timer has expired

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

jail: Turn off some broken jail tests

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: Try some invalid creations of Pakfire

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Initialize like everything else

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Keep better track of all sorts of references

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

cli: snapshots: Commit forgotten files

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Explicitely keep a reference to any xfers

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: python: Load the configuration file

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: Make Pakfire operate in the stub root all the time

This makes it easier than bind-mounting the command.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: Make xfer tests compile again

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Check if we have a valid distribution configuration

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

cli: Don't use logging functions when setting up Pakfire fails

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libpakfire: Export pakfire_update_snapshot

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Fix return values when generating the distro tag

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Catch errors when loading distro information

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshots: Automatically create a new snapshot if there are none

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshot: Remove the option to define packages

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Cleanup old snapshots after creating a new one

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshots: Be more verbose when cleaning up snapshots

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshots: Overlayfs does not like colons in the directory name

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshot: Cleanup old snapshots

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

cli: builder: Add command to update a snapshot

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshots: Add function to create a new snapshot

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Add a function to clone a Pakfire instance

This will create a new independant instance based on the previous one.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Show more information if setup fails

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Pass path when reading /etc/os-release

The Pakfire path is not set at this point.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

config: Add a helper function to dump the configuration into a file handle

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Fail if pakfire_path() is called without the path being set

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

string: Fix incorrect buffer variable

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

linter: Refactor

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: Let Pakfire create its own temporary directories

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: Remove jail tests

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Make the pool status a flag

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Drop the private dir

This is not being used.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Reorganise initialization

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: Drop the old snapshot tests

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshots: Remove the overly complicated struct

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Make the umount code clearer

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Fix incorrect reference counting

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshot: Ensure we only umount once

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Refactor how we mount the ramdisk, and snapshots

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

libpakfire: Remove non-existant function from headers

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshots: Tell the mount operation where to mount the snapshot

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Tidy up the code to create a new pakfire instance slightly

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshots: Destroy directories after umount

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

snapshots: Remove the old-style snapshots

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

build: Remove old-style snapshots

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

cli: Fix enabling the snapshot

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Experimental implementation to use overlayfs for snapshots

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

tests: Make xfer tests compile and run again

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

repo: Cleanup argument order when downloading packages

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Fix error handling when leaving the main loop early

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Don't run the main loop if there are no transfers

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Don't fall through when trying to reset the timer

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Terminate the event loop if there are no transfers left

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

xfer: Keep a reference to ourselves

This is necessary so that the handle won't be cleaned up when the last
reference to the xfer is gone. It should be good enough to add the xfer
to the HTTP client and then wait for everything to complete.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Be less noisy if we cannot open an archive

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

archive: Improve error handling when opening an archive

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

xfer: Only copy the URL once

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

xfer: Fail creation when in offline mode

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Remove references to downloader

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

httpclient: Remove unused cURL import

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

repo: Refactor the xfer creation function

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

xfer: Only have one way to create a new xfer

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

xfer: Decouple more from HTTP client

We used to require a HTTP client to create an xfer but we are actually
not using it any more. That way, we can avoid some more complicated code
paths and we can keep a single request and multiple requests further
apart in the code.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

ctx: Move the cURL share handle here

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

python: Reformat some code

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

python: Add __version__

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

python: Don't mess with the Gettext configuration

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

python: Drop the native Python code and move the C module

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Simplify storing features

We don't need a struct here because we only store a list of strings.

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

pakfire: Remove the unused locking mechanism

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

build: Tell the dependency callback how many bytes have been consumed

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

packages: Fail when trying to add invalid dependencies

Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>