The VHCI platform driver aims to forbid entering system suspend when at
least one of the virtual USB ports are bound to an active USB/IP
connection.
However, in some cases, the detection logic doesn't work reliably, i.e.
when all devices attached to the virtual root hub have been already
suspended, leading to a broken suspend state, with unrecoverable resume.
Ensure the virtually attached devices do not enter suspend by setting
the syscore PM flag. Note this is currently limited to the client side
only, since the server side doesn't implement system suspend prevention.
Merge tag 'thunderbolt-for-v6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.18 merge window
This includes following USB4/Thunderbolt changes for the v6.18 merge
window:
- HMAC hashing improvements
- Switch to use Linux Foundation IDs for XDomain discovery
- Use is_pciehp instead of is_hotplug_bridge
- Fixes for various kernel-doc issues
- Fix use-after-free in DP tunneling error path.
I'm sending the UAF fix with this pull request because it came quite
late and I would like to give it some exposure before it lands the
mainline.
All these except the UAF fix have been in linux-next with no reported
issues.
* tag 'thunderbolt-for-v6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (33 commits)
thunderbolt: Fix use-after-free in tb_dp_dprx_work
thunderbolt: Update thunderbolt.h header file
thunderbolt: Update xdomain.c function documentation
thunderbolt: Update usb4_port.c function documentation
thunderbolt: Update usb4.c function documentation
thunderbolt: Update tunnel.h function documentation
thunderbolt: Update tunnel.c function documentation
thunderbolt: Update tmu.c function documentation
thunderbolt: Add missing documentation in tb.h
thunderbolt: Update tb.h function documentation
thunderbolt: Update tb.c function documentation
thunderbolt: Update switch.c function documentation
thunderbolt: Update retimer.c function documentation
thunderbolt: Update property.c function documentation
thunderbolt: Update path.c function documentation
thunderbolt: Update nvm.c function documentation
thunderbolt: Add missing documentation in nhi_regs.h ring_desc structure
thunderbolt: Update nhi.c function documentation
thunderbolt: Update lc.c function documentation
thunderbolt: Update eeprom.c function documentation
...
thunderbolt: Fix use-after-free in tb_dp_dprx_work
The original code relies on cancel_delayed_work() in tb_dp_dprx_stop(),
which does not ensure that the delayed work item tunnel->dprx_work has
fully completed if it was already running. This leads to use-after-free
scenarios where tb_tunnel is deallocated by tb_tunnel_put(), while
tunnel->dprx_work remains active and attempts to dereference tb_tunnel
in tb_dp_dprx_work().
Replacing cancel_delayed_work() with cancel_delayed_work_sync() is
not feasible as it would introduce a deadlock: both tb_dp_dprx_work()
and the cleanup path acquire tb->lock, and cancel_delayed_work_sync()
would wait indefinitely for the work item that cannot proceed.
Instead, implement proper reference counting:
- If cancel_delayed_work() returns true (work is pending), we release
the reference in the stop function.
- If it returns false (work is executing or already completed), the
reference is released in delayed work function itself.
This ensures the tb_tunnel remains valid during work item execution
while preventing memory leaks.
usb: xhci: align PORTSC trace with one-based port numbering
In the xHCI driver, port numbers are typically described using a one-based
index. However, tracing currently uses a zero-based index. To ensure
consistency between tracing and dynamic debugging, update the trace port
number to use a one-based index.
Address the naming and usage of the TR Dequeue Pointer mask in the xhci
driver. The Endpoint Context Field at offset 0x08 is defined as follows:
Bit 0 Dequeue Cycle State (DCS)
Bits 3:1 RsvdZ (Reserved and Zero)
Bits 63:4 TR Dequeue Pointer
When extracting the TR Dequeue Pointer for an Endpoint without Streams,
in xhci_handle_cmd_set_deq(), the inverted Dequeue Cycle State mask
(~EP_CTX_CYCLE_MASK) is used, inadvertently including the Reserved bits.
Although bits 3:1 are typically zero, using the incorrect mask could cause
issues.
The existing mask, named "SCTX_DEQ_MASK," is misleading because "SCTX"
implies exclusivity to Stream Contexts, whereas the TR Dequeue Pointer is
applicable to both Stream and non-Stream Contexts.
Rename the mask to "TR_DEQ_PTR_MASK", utilize GENMASK_ULL() macro and use
the mask when handling the TR Dequeue Pointer field.
Function xhci_get_hw_deq() returns the Endpoint Context Field 0x08, either
directly from the Endpoint context or a Stream.
usb: xhci-pci: add support for hosts with zero USB3 ports
Add xhci support for PCI hosts that have zero USB3 ports.
Avoid creating a shared Host Controller Driver (HCD) when there is only
one root hub. Additionally, all references to 'xhci->shared_hcd' are now
checked before use.
Only xhci-pci.c requires modification to accommodate this change, as the
xhci core already supports configurations with zero USB3 ports. This
capability was introduced when xHCI Platform and MediaTek added support
for zero USB3 ports.
No actual HW bugs are known where Endpoint Context shows Running state
but Stop Endpoint fails repeatedly with Context State Error and leaves
the endpoint state unchanged. Stop Endpoint retries on Running EPs have
been performed since early 2021 with no such issues reported so far.
Trying to handle this hypothetical case brings a more realistic danger:
if Stop Endpoint fails on an endpoint which hasn't yet started after a
doorbell ring and enough latency occurs before this completion event is
handled, the driver may time out and begin removing cancelled TDs from
a running endpoint, even though one more retry would stop it reliably.
Such high latency is rare but not impossible, and removing TDs from a
running endpoint can cause more damage than not giving back a cancelled
URB (which wasn't happening anyway). So err on the side of caution and
revert to the old policy of always retrying if the EP appears running.
[Remove stable tag as we are dealing with theoretical cases -Mathias]
Fixes: 28a76fcc4c85d ("usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running") Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250917210726.97100-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge patch series "usb: gadget: Refactor function drivers to use __free() cleanup"
Kuen-Han Tsai <khtsai@google.com> says:
This patch series refactors the error-handling paths in the bind()
function for f_ncm, f_acm, f_ecm, and f_rndis drivers.
The current, unified goto logic in these drivers is vulnerable to a null
pointer dereference. This is caused by the cleanup logic incorrectly
handling the stale usb_request pointer after a bind/unbind cycle. This
series fixes this issue by converting the drivers to use the modern
__free() scope-based cleanup mechanism.
Patches 1-2 are preparatory, adding the endpoint pointer to struct
usb_request and defining helpers for the __free() cleanup. The remaining
four patches use this new plumbing to refactor each driver.
Future work
-----------
1. Refactor usb_ep_free_request(), usb_ep_queue(), and usb_ep_dequeue()
functions as the ep parameter becomes redudant.
2. Convert the remaining gadget function drivers to use the new __free()
cleanup mechanism.
usb: gadget: f_rndis: Refactor bind path to use __free()
After an bind/unbind cycle, the rndis->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
usb: gadget: f_ecm: Refactor bind path to use __free()
After an bind/unbind cycle, the ecm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
usb: gadget: f_acm: Refactor bind path to use __free()
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
usb: gadget: f_ncm: Refactor bind path to use __free()
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
usb: gadget: Store endpoint pointer in usb_request
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Document the Renesas RZ/G3E USB3.2 Gen2 Host Controller (a.k.a USB3HOST).
The USB3HOST is compliant with the Universal Serial Bus 3.2 Specification
Revision 1.0.
- Supports 1 downstream USB receptacles
- Number of SSP Gen2 or SS ports: 1
- Number of HS or FS or LS ports: 1
- Supports Super Speed Plus Gen2x1 (10 Gbps), Super Speed (5 Gbps),
High Speed (480 Mbps), Full Speed (12Mbps), and Low Speed (1.5 Mbps).
- Supports all transfer-types: Control, Bulk, Interrupt, Isochronous, and
these split-transactions.
- Supports Power Control and Over Current Detection.
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
A race condition occurs when ffs_func_eps_enable() runs concurrently
with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset()
sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading
to a NULL pointer dereference when accessing epfile->ep in
ffs_func_eps_enable() after successful usb_ep_enable().
The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and
ffs_data_close() functions, and its modification is protected by the
spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function
is also protected by ffs->eps_lock.
Thus, add NULL pointer handling for ffs->epfiles in the
ffs_func_eps_enable() function to fix issues
Stephen Boyd [Tue, 16 Sep 2025 02:16:20 +0000 (10:16 +0800)]
usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=n
Ease driver development by adding stubs for the typec_switch APIs when
CONFIG_TYPEC=n. Copy the same method used for the typec_mux APIs to be
consistent.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250916021620.1303995-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: mon: Increase BUFF_MAX to 64 MiB to support multi-MB URBs
The usbmon binary interface currently truncates captures of large
transfers from higher-speed USB devices. Because a single event capture
is limited to one-fifth of the total buffer size, the current maximum
size of a captured URB is around 240 KiB. This is insufficient when
capturing traffic from modern devices that use transfers of several
hundred kilobytes or more, as truncated URBs can make it impossible for
user-space USB analysis tools like Wireshark to properly defragment and
reassemble higher-level protocol packets in the captured data.
The root cause of this issue is the 1200 KiB BUFF_MAX limit, which has
not been changed since the binary interface was introduced in 2006.
To resolve this issue, this patch increases BUFF_MAX to 64 MiB. The
original comment for BUFF_MAX based the limit's calculation on a
saturated 480 Mbit/s bus. Applying the same logic to a modern USB 3.2
Gen 2×2 20 Gbit/s bus (~2500 MB/s over a 20ms window) indicates the
buffer should be at least 50 MB. The new limit of 64 MiB covers that,
plus a little extra for any overhead.
With this change, both users and developers should now be able to debug
and reverse engineer modern USB devices even when running unmodified
distro kernels.
Please note that this change does not affect the default buffer size. A
larger buffer is only allocated when a user explicitly requests it via
the MON_IOCT_RING_SIZE ioctl, so the change to the maximum buffer size
should not unduly increase memory usage for users that don't
deliberately request a larger buffer.
usb: xhci: plat: Facilitate using autosuspend for xhci plat devices
Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs,
when in host mode, it is intended that the controller goes to suspend
state to save power and wait for interrupts from connected peripheral
to wake it up. This is particularly used in cases where a HID or Audio
device is connected. In such scenarios, the usb controller can enter
auto suspend and resume action after getting interrupts from the
connected device.
Merge patch series "Add SpacemiT K1 USB3.0 host controller support"
Ze Huang <huang.ze@linux.dev> says:
The USB 3.0 controller found in the SpacemiT K1 SoC[1] supports both
USB3.0 Host and USB2.0 Dual-Role Device (DRD).
This controller is compatible with DesignWare Core USB 3 (DWC3) driver.
However, constraints in the `snps,dwc3` bindings limit the ability to
describe hardware-specific features in a clean and maintainable way.
While `dwc3-of-simple` still serves as a glue layer for many platforms,
it requires a split device tree node structure, which is less desirable
in newer platforms.
To promote a transition toward a flattened `dwc` node structure, this
series introduces `dwc3-generic-plat`, building upon prior efforts that
exposed the DWC3 core driver [2].
The device tree support for SpacemiT K1 will be submitted separately
when the associated PHY driver is ready.
Ze Huang [Fri, 12 Sep 2025 16:53:48 +0000 (00:53 +0800)]
usb: dwc3: add generic driver to support flattened
To support flattened dwc3 dt model and drop the glue layer, introduce the
`dwc3-generic` driver. This enables direct binding of the DWC3 core driver
and offers an alternative to the existing glue driver `dwc3-of-simple`.
Ze Huang [Fri, 12 Sep 2025 16:53:47 +0000 (00:53 +0800)]
dt-bindings: usb: dwc3: add support for SpacemiT K1
Add support for the USB 3.0 Dual-Role Device (DRD) controller embedded
in the SpacemiT K1 SoC. The controller is based on the Synopsys
DesignWare Core USB 3 (DWC3) IP, supporting USB3.0 host mode and USB 2.0
DRD mode.
Merge tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.17-rc6 that
resolve some reported problems. Included in here are:
- 8250 driver dt bindings fixes
- broadcom serial driver binding fixes
- hvc_console bugfix
- xilinx serial driver bugfix
- sc16is7xx serial driver bugfix
All of these have been in linux-next for the past week with no
reported issues"
* tag 'tty-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: read reg size from DTS
tty: hvc_console: Call hvc_kick in hvc_write unconditionally
dt-bindings: serial: 8250: allow "main" and "uart" as clock names
dt-bindings: serial: 8250: move a constraint
dt-bindings: serial: brcm,bcm7271-uart: Constrain clocks
serial: sc16is7xx: fix bug in flow control levels init
Merge tag 'usb-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.17-rc6.
Included in here are:
- new usb-serial driver device ids
- dummy-hcd locking bugfix for rt-enabled systems (which is crazy,
but people have odd testing requirements at times...)
- xhci driver bugfixes for reported issues
- typec driver bugfix
- midi2 gadget driver bugfixes
- usb core sysfs file regression fix from -rc1
All of these, except for the last usb sysfs file fix, have been in
linux-next with no reported issues. The sysfs fix was added to the
tree on Friday, and is "obviously correct" and should not have any
problems either, it just didn't have any time for linux-next to pick
up (0-day had no problems with it)"
* tag 'usb-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: core: remove the move buf action
usb: gadget: midi2: Fix MIDI2 IN EP max packet size
usb: gadget: midi2: Fix missing UMP group attributes initialization
usb: typec: tcpm: properly deliver cable vdms to altmode drivers
USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernels
xhci: fix memory leak regression when freeing xhci vdev devices depth first
xhci: dbc: Fix full DbC transfer ring after several reconnects
xhci: dbc: decouple endpoint allocation from initialization
USB: serial: option: add Telit Cinterion LE910C4-WWX new compositions
USB: serial: option: add Telit Cinterion FN990A w/audio compositions
Merge tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a lost-timeout CPU hotplug bug in the hrtimer code, which can
trigger with certain hardware configs and regular HZ"
* tag 'timers-urgent-2025-09-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Unconditionally update target CPU base after offline timer migration
Merge tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk to i8042 for yet another TUXEDO laptop
- a fix to mtk-pmic-keys driver to properly handle MT6359
- a fix to iqs7222 driver to only enable proximity interrupt
if it is mapped to a key or a switch event
- an update to xpad controller driver to recognize Flydigi Apex 5
controller
- an update to maintainers file to drop bounding entry for Melfas
touch controller
* tag 'input-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
MAINTAINERS: Input: Drop melfas-mip4 section
Input: mtk-pmic-keys - MT6359 has a specific release irq
Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk table
Input: iqs7222 - avoid enabling unused interrupts
Input: xpad - add support for Flydigi Apex 5
Hector Martin [Sun, 14 Sep 2025 12:56:16 +0000 (12:56 +0000)]
usb: typec: tipd: Handle mode transitions for CD321x
On Apple Silicon machines there is no control over which alt mode is
chosen. The CD321x' firmware negotiates the target mode on its own and
only lets the main CPU know after the mode has already been chosen.
Especially after plugging a new cable in this can result to quick mode
changes from e.g. power only -> USB3 only -> USB3+DisplayPort in a short
time. It is not possile to influence this in any way and we also do not
get direct access to the PDOs or VDOs exchanged via USB PD.
Additionally, mode changes must be tightly synchronized between DWC3 and
the Type C PHY and most mode changes require a full reset of DWC3 to
make the port work correctly.
This is all done synchronously from the role switch handler inside the
DWC3 glue driver on these machines to avoid tripping any failsafes or
watchdogs inside the Type-C PHY that may, in the worst case, reset the
entire SoC.
To be able to control all this we trigger the entire process in the
correct order directly from the TIPD driver and de-bounce any mode
changes to avoid tearing down and re-setting DWC3 back up multiple times
any time a new connection is made.
Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Co-developed-by: Sven Peter <sven@kernel.org> Signed-off-by: Sven Peter <sven@kernel.org> Reviewed-by: Janne Grunau <j@jannau.net> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-11-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hector Martin [Sun, 14 Sep 2025 12:56:15 +0000 (12:56 +0000)]
usb: typec: tipd: Read data status in probe and cache its value
Just like for power status we also need to keep track of data status to
be able to detect mode changes once we introduce de-bouncing for CD321x.
Read it during probe and keep a cached copy of its value.
Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-10-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hector Martin [Sun, 14 Sep 2025 12:56:14 +0000 (12:56 +0000)]
usb: typec: tipd: Use read_power_status function in probe
We need the initial power status to be able to reliably detect connector
changes once we introduce de-bouncing for CD321x next. read_power_status
takes care of this and also forwards the status to the trace subsystem
so let's use that instead of open-coding it inside probe.
Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-9-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hector Martin [Sun, 14 Sep 2025 12:56:13 +0000 (12:56 +0000)]
usb: typec: tipd: Update partner identity when power status was updated
Whenever the power status is changed make sure to also update the
partner identity to be able to detect changes once de-bouncing and mode
changes are added for CD321x.
Sven Peter [Sun, 14 Sep 2025 12:56:12 +0000 (12:56 +0000)]
usb: typec: tipd: Register DisplayPort and Thunderbolt altmodes for cd321x
Ports equipped with a CD321x are only found on Apple Silicon machines
and always support DisplayPort, Thunderbolt and USB4. Register these
port modes unconditionally.
Sven Peter [Sun, 14 Sep 2025 12:56:11 +0000 (12:56 +0000)]
usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x
CD321x supports various alternate modes and stores information once
these are entered into separate status registers. Read those when they
are active when reading TPS_DATA_STATUS to prepare supporting these.
Sven Peter [Sun, 14 Sep 2025 12:56:10 +0000 (12:56 +0000)]
usb: typec: tipd: Add cd321x struct with separate size
We're about to add more fields to struct tps6598x which are only relevant
for Apple's CD321x and to ensure that we don't waste memory everywhere for
those add a separate struct for cd321x and prepare to allocate more space
inside probe.
Sven Peter [Sun, 14 Sep 2025 12:56:09 +0000 (12:56 +0000)]
usb: typec: tipd: Trace data status for CD321x correctly
Some bits inside the CD321x TPS_DATA_STATUS register have a different
function compared to the original tipd chip. Add these and introduce a
separate trace function to show them correctly.
Sven Peter [Sun, 14 Sep 2025 12:56:08 +0000 (12:56 +0000)]
usb: typec: tipd: Move switch_power_state to tipd_data
When support for CD321x was originally added no other hardware variant
was supported and there was no need for struct tipd_data. Now that it
exists move the special case in there so that we can drop the
of_device_is_compatible_check entirely.
Sven Peter [Sun, 14 Sep 2025 12:56:06 +0000 (12:56 +0000)]
usb: typec: tipd: Clear interrupts first
Right now the interrupt handler first reads all updated status registers
and only then clears the interrupts. It's possible that a duplicate
interrupt for a changed register or plug state comes in after the
interrupts have been processed but before they have been cleared:
* plug is inserted, TPS_REG_INT_PLUG_EVENT is set
* TPS_REG_INT_EVENT1 is read
* tps6598x_handle_plug_event() has run and registered the plug
* plug is removed again, TPS_REG_INT_PLUG_EVENT is set (again)
* TPS_REG_INT_CLEAR1 is written, TPS_REG_INT_PLUG_EVENT is cleared
We then have no plug connected and no pending interrupt but the tipd
core still thinks there is a plug. It's possible to trigger this with
e.g. a slightly broken Type-C to USB A converter.
Fix this by first clearing the interrupts and only then reading the
updated registers.
Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X") Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Cc: stable@kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250914-apple-usb3-tipd-v1-1-4e99c8649024@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'erofs-for-6.17-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix long xattr name prefix placement
erofs: fix runtime warning on truncate_folio_batch_exceptionals()
erofs: fix invalid algorithm for encoded extents
Merge tag 'ceph-for-6.17-rc6' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for a race condition around r_parent tracking that took a long
time to track down from Alex and some fixes for potential crashes on
accessing invalid memory from Max and myself.
All marked for stable"
* tag 'ceph-for-6.17-rc6' of https://github.com/ceph/ceph-client:
libceph: fix invalid accesses to ceph_connection_v1_info
ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error
ceph: always call ceph_shift_unused_folios_left()
ceph: fix race condition where r_parent becomes stale before sending message
ceph: fix race condition validating r_parent before applying state
Merge tag 'regulator-fix-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix for sy7636a which got confused about which device to use to
manage the lifecycle of the power good GPIO because it's looked up
from the parent device due to the way DT bindings work"
* tag 'regulator-fix-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: sy7636a: fix lifecycle of power good gpio
Merge tag 'driver-core-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix UAF in cgroup pressure polling by using kernfs_get_active_of()
to prevent operations on released file descriptors
- Fix unresolved intra-doc link in the documentation of struct Device
when CONFIG_DRM != y
- Update the DMA Rust MAINTAINERS entry
* tag 'driver-core-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
MAINTAINERS: Update the DMA Rust entry
kernfs: Fix UAF in polling when open file is released
rust: device: fix unresolved link to drm::Device
Merge tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly pull fixes for drm, mostly amdgpu and xe, with a revert for
nouveau and some maintainers updates, and misc bits, doesn't seem too
out of the normal.
MAINTAINERS:
- add rust tree to MAINTAINERS
- fix X entries for nova/nouveau
nova:
- depend on 64-bit
i915:
- Fix size for for_each_set_bit() in abox iteration
xe:
- Don't touch survivability_mode on fini
- Fixes around eviction and suspend
- Extend Wa_13011645652 to PTL-H, WCL
nouveau:
- revert waitqueue removal for sched teardown
* tag 'drm-fixes-2025-09-12' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
MAINTAINERS: drm-misc: fix X: entries for nova/nouveau
drm/mediatek: clean up driver data initialisation
drm/mediatek: fix potential OF node use-after-free
drm/amdgpu/vcn: Allow limiting ctx to instance 0 for AV1 at any time
drm/amdgpu/vcn4: Fix IB parsing with multiple engine info packages
drm/amd/amdgpu: Declare isp firmware binary file
drm/amd/display: use udelay rather than fsleep
drm/amdgpu: fix a memory leak in fence cleanup when unloading
drm/xe: Extend Wa_13011645652 to PTL-H, WCL
drm/xe: Block exec and rebind worker while evicting for suspend / hibernate
drm/xe: Allow the pm notifier to continue on failure
drm/xe: Attempt to bring bos back to VRAM after eviction
drm/xe/configfs: Don't touch survivability_mode on fini
amd/amdkfd: correct mem limit calculation for small APUs
drm/amdkfd: fix p2p links bug in topology
drm/amd/display: remove oem i2c adapter on finish
drm/amd/display: Drop dm_prepare_suspend() and dm_complete()
drm/amd/display: Correct sequences and delays for DCN35 PG & RCG
drm/amd/display: Disable DPCD Probe Quirk
drm/i915/power: fix size for for_each_set_bit() in abox iteration
...
Merge tag 'v6.17-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Two smb3 client fixes, both for stable:
- Fix encryption problem with multiple compounded ops
- Fix rename error cases that could lead to data corruption"
* tag 'v6.17-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix data loss due to broken rename(2)
smb: client: fix compound alignment with encryption
Merge patch series "Support system sleep with offloaded usb transfers" into usb-next
Guan-Yu Lin <guanyulin@google.com> says:
Wesley Cheng and Mathias Nyman's USB offload design enables a
co-processor to handle some USB transfers, potentially allowing the
system to sleep (suspend-to-RAM) and save power. However, Linux's System
Sleep model halts the USB host controller when the main system isn't
managing any USB transfers. To address this, the proposal modifies the
system to recognize offloaded USB transfers and manage power
accordingly. This way, offloaded USB transfers could still happen during
system sleep (Suspend-to-RAM).
This involves two key steps:
1. Transfer Status Tracking: Propose offload_usage and corresponding
apis drivers could track USB transfers on the co-processor, ensuring
the system is aware of any ongoing activity.
2. Power Management Adjustment: Modifications to the USB driver stack
(xhci host controller driver, and USB device drivers) allow the
system to sleep (Suspend-to-RAM) without disrupting co-processor
managed USB transfers. This involves adding conditional checks to
bypass some power management operations in the System Sleep model.
Guan-Yu Lin [Thu, 11 Sep 2025 14:20:16 +0000 (14:20 +0000)]
usb: host: enable USB offload during system sleep
Sharing a USB controller with another entity via xhci-sideband driver
creates power management complexities. To prevent the USB controller
from being inadvertently deactivated while in use by the other entity, a
usage-count based mechanism is implemented. This allows the system to
manage power effectively, ensuring the controller remains available
whenever needed.
In order to maintain full functionality of an offloaded USB devices,
several changes are made within the suspend flow of such devices:
- skip usb_suspend_device() so that the port/hub are still active for
USB transfers via offloaded path.
- not suspending the endpoints which are used by USB interfaces marked
with needs_remote_wakeup. Namely, skip usb_suspend_interface() and
usb_hcd_flush_endpoint() on associated USB interfaces. This reserves a
pending interrupt urb during system suspend for handling the interrupt
transfer, which is necessary since remote wakeup doesn't apply in the
offloaded USB devices when controller is still active.
- not flushing the endpoints of actively offloaded USB devices. Given
that the USB devices is used by another entity, unilaterally flush the
endpoint might lead to unexpected behavior on another entity.
- not suspending the xhci controller. This is done by skipping the
suspend/resume callbacks in the xhci platform driver.
Guan-Yu Lin [Thu, 11 Sep 2025 14:20:15 +0000 (14:20 +0000)]
xhci: sideband: add api to trace sideband usage
The existing sideband driver only registers sidebands without tracking
their active usage. To address this, sideband will now record its active
usage when it creates/removes interrupters. In addition, a new api is
introduced to provide a means for other dirvers to fetch sideband
activity information on a USB host controller.
Guan-Yu Lin [Thu, 11 Sep 2025 14:20:14 +0000 (14:20 +0000)]
usb: offload: add apis for offload usage tracking
Introduce offload_usage and corresponding apis to track offload usage
on each USB device. Offload denotes that there is another co-processor
accessing the USB device via the same USB host controller. To optimize
power usage, it's essential to monitor whether the USB device is
actively used by other co-processor. This information is vital when
determining if a USB device can be safely suspended during system power
state transitions.
Guan-Yu Lin [Thu, 11 Sep 2025 14:20:13 +0000 (14:20 +0000)]
usb: xhci-plat: separate dev_pm_ops for each pm_event
Separate dev_pm_ops for different power events such as suspend, thaw,
and hibernation. This is crucial when xhci-plat driver needs to adapt
its behavior based on different power state changes.
Israel Cepeda [Thu, 11 Sep 2025 18:13:43 +0000 (20:13 +0200)]
i2c: Add Intel USBIO I2C driver
Add a a driver for the I2C auxbus child device of the Intel USBIO USB
IO-expander used by the MIPI cameras on various new (Meteor Lake and
later) Intel laptops.
Co-developed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20250911181343.77398-4-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Israel Cepeda [Thu, 11 Sep 2025 18:13:42 +0000 (20:13 +0200)]
gpio: Add Intel USBIO GPIO driver
Add a a driver for the GPIO auxbus child device of the Intel USBIO USB
IO-expander used by the MIPI cameras on various new (Meteor Lake and
later) Intel laptops.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Co-developed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com> Link: https://lore.kernel.org/r/20250911181343.77398-3-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Israel Cepeda [Thu, 11 Sep 2025 18:13:41 +0000 (20:13 +0200)]
usb: misc: Add Intel USBIO bridge driver
Add a driver for the Intel USBIO USB IO-expander used by the MIPI cameras
on various new (Meteor Lake and later) Intel laptops.
This is an USB bridge driver which adds auxbus child devices for the GPIO,
I2C and SPI functions of the USBIO chip and which exports IO-functions for
the drivers for the auxbus child devices to communicate with the USBIO
device's firmware.
Co-developed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com> Link: https://lore.kernel.org/r/20250911181343.77398-2-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: dwc3: qcom: Implement glue callbacks to facilitate runtime suspend
On Qualcomm DWC3 dual-role controllers, the conndone/disconnect events in
device mode are generated by controller when software writes to QSCRATCH
registers in Qualcomm Glue layer rather than the vbus line being routed to
dwc3 core IP for it to recognize and generate these events.
UTMI_OTG_VBUS_VALID bit of QSCRATCH_HS_PHY_CTRL register needs to be set
to generate a connection done event and to be cleared for the controller to
generate a disconnect event during cable removal. When the disconnect is
not generated upon cable removal, the "connected" flag of dwc3 is left
marked as "true" and it blocks suspend routines and for that to happen upon
cable removal, the cable disconnect notification coming in via set_role
call need to be provided to the Qualcomm glue layer as well.
Currently, the way DWC3 core and Qualcomm legacy glue driver are designed,
there is no mechanism through which the DWC3 core can notify the Qualcomm
glue layer of any role changes which it receives via role switch. To
register these glue callbacks at probe time, for enabling core to notify
glue layer, the legacy Qualcomm driver has no way to find out when the
child driver probe was successful since it does not check for the same
during of_platform_populate.
Hence implement the following glue callbacks for flattened Qualcomm glue
driver:
1. set_role: To pass role switching information from drd layer to glue.
This information is needed to identify NONE/DEVICE mode switch and modify
QSCRATCH to generate connect-done event on device mode entry and disconnect
event on cable removal in device mode.
2. run_stop: When booting up in device mode, if autouspend is enabled and
userspace doesn't write UDC on boot, controller enters autosuspend. After
this, if the userspace writes to UDC in the future, run_stop notifier is
required to enable UTMI_OTG_VBUS_VALID of QSCRATCH so that connect done
event is generated after run_stop(1) is done to finish enumeration.
usb: dwc3: core: Introduce glue callbacks for flattened implementations
In certain situations like role switching, the glue layers need to be
informed of these events, so that they can take any necessary action.
But in non-flattened implementations, the glue drivers have no data on
when the core driver probe was successful post invoking of_platform_
populate. Now that the core driver supports flattened implementations
as well, introduce vendor callbacks that can be passed on from glue to
core before invoking dwc3_core_probe.
Introduce callbacks to notify glue layer of role_switch and run_stop
changes. These can be used by flattened implementation of Qualcomm
glue layer to generate connect/disconnect events in controller during
cable connect and run stop modifications by udc in device mode.
Haotien Hsu [Mon, 11 Aug 2025 07:45:58 +0000 (15:45 +0800)]
usb: xhci: tegra: Support USB wakeup function for Tegra234
When the system is suspended, USB hot-plugging/unplugging can trigger
wake events of the Tegra USB host controller.
Enable support for USB wake-up events by parsing device-tree to see if
the interrupts for the wake-up events are present and if so configure
those interrupts. Note that if wake-up events are not present, still
allow the USB host controller to probe as normal.
usb: dwc2: Add support for 'maximum-speed' property
The DWC2 IP can be properly integrated in a SoC to work at high-speed
USB speed but some board issues, EMC constraints or any other reasons
can lead to the need to limit this USB speed at board level.
The device-tree 'maximum-speed' property already exists for this purpose
but is not handled by the DWC2 driver.
Fill this lack adding support for 'maximum-speed' property and so allow
to limit the USB speed in device-tree (board description).
Xu Yang [Wed, 10 Sep 2025 10:50:42 +0000 (18:50 +0800)]
usb: typec: tcpci: add wakeup support
Add wakeup support for tcpci. If the user enables the wakeup file, call
enable_irq_wake() during system suspend and disable_irq_wake() during
system resume. Since this driver supports shared interrupts, mask the
chip interrupt by default when wakeup is disabled to avoid affecting
other IRQ users.
Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20250910105042.695146-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The buffer size of sysfs is fixed at PAGE_SIZE, and the page offset
of the buf parameter of sysfs_emit_at() must be 0, there is no need
to manually manage the buf pointer offset.
Fixes: 711d41ab4a0e ("usb: core: Use sysfs_emit_at() when showing dynamic IDs") Reported-by: syzbot+b6445765657b5855e869@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b6445765657b5855e869 Tested-by: syzbot+b6445765657b5855e869@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Link: https://lore.kernel.org/r/tencent_B32D6D8C9450EBFEEE5ACC2C7B0E6C402D0A@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Fri, 29 Aug 2025 08:15:45 +0000 (11:15 +0300)]
MAINTAINERS: Update Michael Jamet's maintainer entries
Michael Jamet is about to continue his professional journey outside of
Intel and is stepping down as maintainer of Thunderbolt/USB4 subsystem,
and the networking driver. Move him from MAINTAINERS to CREDITS.
Thank you, Michael!
Cc: Michael Jamet <jametm@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
projects / thirdparty / kernel / stable.git / log
