Eric Sunshine [Wed, 18 May 2016 20:15:45 +0000 (16:15 -0400)]
t1500: avoid setting environment variables outside of tests
Ideally, each test should be responsible for setting up state it needs
rather than relying upon transient global state. Toward this end, teach
test_rev_parse() to accept a "-g <dir>" option to allow callers to
specify the value of the GIT_DIR environment variable explicitly. Take
advantage of this new option to avoid polluting the global scope with
GIT_DIR assignments.
Implementation note: Typically, tests avoid polluting the global state
by wrapping transient environment variable assignments within a
subshell, however, this technique doesn't work here since test_config()
and test_unconfig() need to know GIT_DIR, as well, but neither function
can be used within a subshell. Consequently, GIT_DIR is instead cleared
manually via test_when_finished().
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Wed, 18 May 2016 20:15:44 +0000 (16:15 -0400)]
t1500: avoid setting configuration options outside of tests
Ideally, each test should be responsible for setting up state it needs
rather than relying upon transient global state. Toward this end, teach
test_rev_parse() to accept a "-b <value>" option to allow callers to set
"core.bare" explicitly or undefine it. Take advantage of this new option
to avoid setting "core.bare" outside of tests.
Under the hood, "-b <value>" invokes "test_config -C <dir>" (or
"test_unconfig -C <dir>"), thus git-config knows explicitly where to
find its configuration file. Consequently, the global GIT_CONFIG
environment variable required by the manual git-config invocations
outside of tests is no longer needed, and is thus dropped.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Wed, 18 May 2016 20:15:43 +0000 (16:15 -0400)]
t1500: avoid changing working directory outside of tests
Ideally, each test should be responsible for setting up state it needs
rather than relying upon transient global state. Toward this end, teach
test_rev_parse() to accept a "-C <dir>" option to allow callers to
instruct it explicitly in which directory its tests should be run. Take
advantage of this new option to avoid changing the working directory
outside of tests.
Implementation note: test_rev_parse() passes "-C <dir>" along to
git-rev-parse with <dir> properly quoted. The natural and POSIX way to
do so is via ${dir:+-C "$dir"}, however, with some older broken shells,
this expression evaluates incorrectly to a single argument ("-C <dir>")
rather than the expected two (-C and "<dir>"). Work around this problem
with the slightly ungainly expression: ${dir:+-C} ${dir:+"$dir"}
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Wed, 18 May 2016 20:15:42 +0000 (16:15 -0400)]
t1500: test_rev_parse: facilitate future test enhancements
Tests run by test_rev_parse() are nearly identical; each invokes
git-rev-parse with a single option and compares the result against an
expected value. Such duplication makes it onerous to extend the tests
since any change needs to be repeated in each test. Avoid the
duplication by parameterizing the test and driving it via a for-loop.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Tue, 17 May 2016 19:36:26 +0000 (15:36 -0400)]
t1500: be considerate to future potential tests
The final batch of git-rev-parse tests work against a non-local object
database named repo.git. This is done by renaming .git to repo.git and
pointing GIT_DIR at it, but the name is never restored to .git at the
end of the script, which can be problematic for tests added in the
future. Be more friendly by instead making repo.git a copy of .git.
Furthermore, make it clear that tests in repo.git will be independent
from the results of earlier tests done in .git by initializing repo.git
earlier in the test sequence.
Likewise, bundle remaining preparation (such as directory creation) into
a common setup test consistent with modern practice.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 6 May 2016 21:53:24 +0000 (14:53 -0700)]
Merge branch 'sb/submodule-path-misc-bugs' into maint
"git submodule" reports the paths of submodules the command
recurses into, but this was incorrect when the command was not run
from the root level of the superproject.
* sb/submodule-path-misc-bugs:
t7407: make expectation as clear as possible
submodule update: test recursive path reporting from subdirectory
submodule update: align reporting path for custom command execution
submodule status: correct path handling in recursive submodules
submodule update --init: correct path handling in recursive submodules
submodule foreach: correct path display in recursive submodules
Junio C Hamano [Fri, 6 May 2016 21:53:24 +0000 (14:53 -0700)]
Merge branch 'ky/imap-send-openssl-1.1.0' into maint
Upcoming OpenSSL 1.1.0 will break compilation b updating a few APIs
we use in imap-send, which has been adjusted for the change.
* ky/imap-send-openssl-1.1.0:
configure: remove checking for HMAC_CTX_cleanup
imap-send: avoid deprecated TLSv1_method()
imap-send: check NULL return of SSL_CTX_new()
imap-send: use HMAC() function provided by OpenSSL
Matthieu Moy [Tue, 3 May 2016 08:31:42 +0000 (10:31 +0200)]
git-multimail: update to release 1.3.0
The changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr> Contributions-by: Stefan Tatschner <rumpelsepp@sevenbyte.org> Contributions-by: Simon P <simon.git@le-huit.fr> Contributions-by: Leander Hasty <leander@1stplayable.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 2 May 2016 21:24:11 +0000 (14:24 -0700)]
Merge branch 'ad/cygwin-wants-rename' into maint
On Cygwin, object creation uses the "create a temporary and then
rename it to the final name" pattern, not "create a temporary,
hardlink it to the final name and then unlink the temporary"
pattern.
This is necessary to use Git on Windows shared directories, and is
already enabled for the MinGW and plain Windows builds. It also
has been used in Cygwin packaged versions of Git for quite a while.
See http://thread.gmane.org/gmane.comp.version-control.git/291853
($gmane/275680, $gmane/291853).
Junio C Hamano [Mon, 2 May 2016 21:24:10 +0000 (14:24 -0700)]
Merge branch 'jk/do-not-printf-NULL' into maint
"git config" had a codepath that tried to pass a NULL to
printf("%s"), which nobody seems to have noticed.
* jk/do-not-printf-NULL:
git_config_set_multivar_in_file: handle "unset" errors
git_config_set_multivar_in_file: all non-zero returns are errors
config: lower-case first word of error strings
Junio C Hamano [Mon, 2 May 2016 21:24:08 +0000 (14:24 -0700)]
Merge branch 'sb/submodule-helper-clone-regression-fix' into maint
A partial rewrite of "git submodule" in the 2.7 timeframe changed
the way the gitdir: pointer in the submodules point at the real
repository location to use absolute paths by accident. This has
been corrected.
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
Junio C Hamano [Mon, 2 May 2016 21:24:07 +0000 (14:24 -0700)]
Merge branch 'jk/branch-shortening-funny-symrefs' into maint
A change back in version 2.7 to "git branch" broke display of a
symbolic ref in a non-standard place in the refs/ hierarchy (we
expect symbolic refs to appear in refs/remotes/*/HEAD to point at
the primary branch the remote has, and as .git/HEAD to point at the
branch we locally checked out).
* jk/branch-shortening-funny-symrefs:
branch: fix shortening of non-remote symrefs
Junio C Hamano [Mon, 2 May 2016 21:24:06 +0000 (14:24 -0700)]
Merge branch 'es/format-patch-doc-hide-no-patch' into maint
"git format-patch --help" showed `-s` and `--no-patch` as if these
are valid options to the command. We already hide `--patch` option
from the documentation, because format-patch is about showing the
diff, and the documentation now hides these options as well.
* es/format-patch-doc-hide-no-patch:
git-format-patch.txt: don't show -s as shorthand for multiple options
Junio C Hamano [Mon, 2 May 2016 21:24:05 +0000 (14:24 -0700)]
Merge branch 'ky/branch-m-worktree' into maint
When "git worktree" feature is in use, "git branch -m" renamed a
branch that is checked out in another worktree without adjusting
the HEAD symbolic ref for the worktree.
* ky/branch-m-worktree:
set_worktree_head_symref(): fix error message
branch -m: update all per-worktree HEADs
refs: add a new function set_worktree_head_symref
Junio C Hamano [Mon, 2 May 2016 21:24:04 +0000 (14:24 -0700)]
Merge branch 'jk/check-repository-format' into maint
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
Junio C Hamano [Fri, 29 Apr 2016 21:15:58 +0000 (14:15 -0700)]
Merge branch 'tb/blame-force-read-cache-to-workaround-safe-crlf' into maint
When running "git blame $path" with unnormalized data in the index
for the path, the data in the working tree was blamed, even though
"git add" would not have changed what is already in the index, due
to "safe crlf" that disables the line-end conversion. It has been
corrected.
* tb/blame-force-read-cache-to-workaround-safe-crlf:
correct blame for files commited with CRLF
Junio C Hamano [Fri, 29 Apr 2016 21:15:55 +0000 (14:15 -0700)]
Merge branch 'sg/diff-multiple-identical-renames' into maint
"git diff -M" used to work better when two originally identical
files A and B got renamed to X/A and X/B by pairing A to X/A and B
to X/B, but this was broken in the 2.0 timeframe.
* sg/diff-multiple-identical-renames:
diffcore: fix iteration order of identical files during rename detection
Junio C Hamano [Mon, 25 Apr 2016 20:36:26 +0000 (13:36 -0700)]
Merge tag 'l10n-2.8.0-rnd3-fr' of git://github.com/git-l10n/git-po into maint
l10n-2.8.0-rnd3-fr
* tag 'l10n-2.8.0-rnd3-fr' of git://github.com/git-l10n/git-po:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
Merge branch 'fr_v2.8.0_r3' of git://github.com/jnavila/git into maint
* 'fr_v2.8.0_r3' of git://github.com/jnavila/git:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
Junio C Hamano [Fri, 15 Apr 2016 01:57:49 +0000 (18:57 -0700)]
Merge branch 'jv/merge-nothing-into-void' into maint
"git merge FETCH_HEAD" dereferenced NULL pointer when merging
nothing into an unborn history (which is arguably unusual usage,
which perhaps was the reason why nobody noticed it).
* jv/merge-nothing-into-void:
merge: fix NULL pointer dereference when merging nothing into void
Junio C Hamano [Fri, 15 Apr 2016 01:57:48 +0000 (18:57 -0700)]
Merge branch 'ss/commit-squash-msg' into maint
When "git merge --squash" stopped due to conflict, the concluding
"git commit" failed to read in the SQUASH_MSG that shows the log
messages from all the squashed commits.
* ss/commit-squash-msg:
commit: do not lose SQUASH_MSG contents
Junio C Hamano [Fri, 15 Apr 2016 01:57:46 +0000 (18:57 -0700)]
Merge branch 'jk/startup-info' into maint
The startup_info data, which records if we are working inside a
repository (among other things), are now uniformly available to Git
subcommand implementations, and Git avoids attempting to touch
references when we are not in a repository.
* jk/startup-info:
use setup_git_directory() in test-* programs
grep: turn off gitlink detection for --no-index
mailmap: do not resolve blobs in a non-repository
remote: don't resolve HEAD in non-repository
setup: set startup_info->have_repository more reliably
setup: make startup_info available everywhere
Junio C Hamano [Fri, 15 Apr 2016 01:57:44 +0000 (18:57 -0700)]
Merge branch 'jk/rev-parse-local-env-vars' into maint
The "--local-env-vars" and "--resolve-git-dir" options of "git
rev-parse" failed to work outside a repository when the command's
option parsing was rewritten in 1.8.5 era.
* jk/rev-parse-local-env-vars:
rev-parse: let some options run outside repository
t1515: add tests for rev-parse out-of-repo helpers
Junio C Hamano [Fri, 15 Apr 2016 01:57:43 +0000 (18:57 -0700)]
Merge branch 'jk/config-get-urlmatch' into maint
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
Remove extra + 1 from resp_len, the length of the byte sequence to be
Base64 encoded and passed to the server as the response. Or the response
incorrectly contains an extra \0.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send: check for NOLOGIN capability only when using LOGIN command
Don't check for NOLOGIN (LOGINDISABLED) capability when imap.authMethod
is specified.
LOGINDISABLED capability doesn't forbid using AUTHENTICATE, so it should
be allowed, or we can't connect to IMAP servers which only accepts
AUTHENTICATE command.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 12 Apr 2016 16:59:59 +0000 (09:59 -0700)]
t3404: use write_script
The test uses hardcoded #!/bin/sh to create a pre-commit hook
script. Because the generated script uses $(command substitution),
which is not supported by /bin/sh on some platforms (e.g. Solaris),
the resulting pre-commit always fails.
Which is not noticeable as the test that uses the hook is about
checking the behaviour of the command when the hook fails ;-), but
nevertheless it is not testing what we wanted to test.
Use write_script so that the resulting script is run under the same
shell our scripted Porcelain commands are run, which must support
the necessary $(construct).
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 10 Apr 2016 19:01:30 +0000 (12:01 -0700)]
t1020: do not overuse printf and use write_script
The test prepares a sample file "dir/two" with a single incomplete
line in it with "printf", and also prepares a small helper script
"diff" to create a file with a single incomplete line in it, again
with "printf". The output from the latter is compared with an
expected output, again prepared with "printf" hence lacking the
final LF. There is no reason for this test to be using files with
an incomplete line at the end, and these look more like a mistake
of not using
printf "%s\n" "string to be written"
and using
printf "string to be written"
Depending on what would be in $GIT_PREFIX, using the latter form
could be a bug waiting to happen. Correct them.
Also, the test uses hardcoded #!/bin/sh to create a small helper
script. For a small task like what the generated script does, it
does not matter too much in that what appears as /bin/sh would not
be _so_ broken, but while we are at it, use write_script instead,
which happens to make the result easier to read by reducing need
of one level of quoting.
Jeff King [Sat, 9 Apr 2016 21:04:30 +0000 (17:04 -0400)]
t5532: use write_script
The recent cleanup in b7cbbff switched t5532's use of
backticks to $(). This matches our normal shell style, which
is good. But it also breaks the test on Solaris, where
/bin/sh does not understand $().
Our normal shell style assumes a modern-ish shell which
knows about $(). However, some tests create small helper
scripts and just write "#!/bin/sh" into them. These scripts
either need to go back to using backticks, or they need to
respect $SHELL_PATH. The easiest way to do the latter is to
use write_script.
While we're at it, let's also stick the script creation
inside a test_expect block (our usual style), and split the
perl snippet into its own script (to prevent quoting
madness).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass off to the "_gently" form to do the real work, and
just die() if it returned an error. However, our die message
de-references "value", which may be NULL if the request was
to unset a variable. Nobody using glibc noticed, because it
simply prints "(null)", which is good enough for the test
suite (and presumably very few people run across this in
practice). But other libc implementations (like Solaris) may
segfault.
Let's not only fix that, but let's make the message more
clear about what is going on in the "unset" case.
Reported-by: "Tom G. Christensen" <tgc@jupiterrise.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 9 Apr 2016 17:42:54 +0000 (13:42 -0400)]
git_config_set_multivar_in_file: all non-zero returns are errors
This function is just a thin wrapper for the "_gently" form
of the function. But the gently form is designed to feed
builtin/config.c, which passes our return code directly to
its exit status, and thus uses positive error values for
some cases. We check only negative values, meaning we would
fail to die in some cases (e.g., a malformed key).
This may or may not be triggerable in practice; we tend to
use this non-gentle form only when setting internal
variables, which would not have malformed keys.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connections to remote sites time out, waiting for DNS resolution.
The logic to detect various flavours of SOCKS proxy and ask the
libcurl layer to use appropriate one understands the proxy string
that begin with socks5, socks4a, etc., but does not know socks5h,
and we end up using CURLPROXY_SOCKS5. The correct one to use is
CURLPROXY_SOCKS5_HOSTNAME.
Use SSLv23_method always and disable SSL if needed.
TLSv1_method() function is deprecated in OpenSSL 1.1.0 and the compiler
emits a warning.
SSLv23_method() is also deprecated, but the alternative, TLS_method(),
is new in OpenSSL 1.1.0 so requires checking by configure. Stick to
SSLv23_method() for now (this is aliased to TLS_method()).
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send: use HMAC() function provided by OpenSSL
Fix compile errors with OpenSSL 1.1.0.
HMAC_CTX is made opaque and HMAC_CTX_cleanup is removed in OpenSSL
1.1.0. But since we just want to calculate one HMAC, we can use HMAC()
here, which exists since OpenSSL 0.9.6 at least.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Emit an informative error when failed to hold lock of HEAD.
2233066e (refs: add a new function set_worktree_head_symref,
2016-03-27) added set_worktree_head_symref(), but this is missing a
call to unable_to_lock_message() after hold_lock_file_for_update()
fails, so it emits an empty error message:
% git branch -m oldname newname
error:
error: HEAD of working tree /path/to/wt is not updated
fatal: Branch renamed to newname, but HEAD is not updated!
Thanks to Eric Sunshine for pointing this out.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 7 Apr 2016 19:56:26 +0000 (12:56 -0700)]
commit: do not ignore an empty message given by -m ''
When f9568530 (builtin-commit: resurrect behavior for multiple -m
options, 2007-11-11) converted a "char *message" to "struct strbuf
message" to hold the messages given with the "-m" option, it
incorrectly changed the checks "did we get a message with the -m
option?" to "is message.len 0?". Later, we noticed one breakage
from this change and corrected it with 25206778 (commit: don't start
editor if empty message is given with -m, 2013-05-25).
However, "we got a message with -m, even though an empty one, so we
shouldn't be launching an editor" was not the only breakage.
* "git commit --amend -m '' --allow-empty", even though it looks
strange, is a valid request to amend the commit to have no
message at all. Due to the misdetection of the presence of -m on
the command line, we ended up keeping the log messsage from the
original commit.
* "git commit -m "$msg" -F file" should be rejected whether $msg is
an empty string or not, but due to the same bug, was not rejected
when $msg is empty.
* "git -c template=file -m "$msg"" should ignore the template even
when $msg is empty, but it didn't and instead used the contents
from the template file.
Correct these by checking have_option_m, which the earlier 25206778
introduced to fix the same bug.
Reported-by: Adam Dinwoodie <adam@dinwoodie.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adam Dinwoodie [Wed, 6 Apr 2016 17:15:03 +0000 (18:15 +0100)]
commit: --amend -m '' silently fails to wipe message
`git commit --amend -m ''` seems to be an unambiguous request to blank a
commit message, but it actually leaves the commit message as-is. That's
the case regardless of whether `--allow-empty-message` is specified, and
doesn't so much as drop a non-zero return code.
Add failing tests to show this behaviour.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Apr 2016 19:38:18 +0000 (12:38 -0700)]
setup.c: do not feed NULL to "%.*s" even with precision 0
A recent update 75faa45a (replace trivial malloc + sprintf / strcpy
calls with xstrfmt, 2015-09-24) rewrote
prepare an empty buffer
if (len)
append the first len bytes of "prefix" to the buffer
append "path" to the buffer
that computed "path", optionally prefixed by "prefix", into
xstrfmt("%.*s%s", len, prefix, path);
However, passing a NULL pointer to the printf(3) family of functions
to format it with %s conversion, even with the precision set to 0,
i.e.
xstrfmt("%.*s", 0, NULL)
yields undefined results, at least on some platforms.
Avoid this problem by substituting prefix with "" when len==0, as
prefix can legally be NULL in that case. This would mimick the
intent of the original code better.
Reported-by: Tom G. Christensen <tgc@jupiterrise.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 6 Apr 2016 20:25:38 +0000 (20:25 +0000)]
send-email: do not load Data::Dumper
We never used Data::Dumper in this script. The only reference
of it was always commented out and removed over a decade ago in
commit 4bc87a28be020a6bf7387161c65ea3d8e4a0228b
("send-email: Change from Mail::Sendmail to Net::SMTP")
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 6 Apr 2016 20:07:14 +0000 (20:07 +0000)]
send-email: more meaningful Message-ID
Using a YYYYmmddHHMMSS date representation is more meaningful to
humans, especially when used for lookups on NNTP servers or linking
to archive sites via Message-ID (e.g. mid.gmane.org or
mid.mail-archive.com). This timestamp format more easily gives a
reader of the URL itself a rough date of a linked message compared
to having them calculate the seconds since the Unix epoch.
Furthermore, having the MUA name in the Message-ID seems to be a
rare oddity I haven't noticed outside of git-send-email. We
already have an optional X-Mailer header field to advertise for
us, so extending the Message-ID by 15 characters can make for
unpleasant Message-ID-based URLs to archive sites.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git blame reports lines as not "Not Committed Yet" when they have
CRLF in the index, CRLF in the worktree and core.autocrlf is true.
Since commit c4805393 (autocrlf: Make it work also for un-normalized
repositories, 2010-05-12), files that have CRLF in the index are not
normalized at commit when core.autocrl is set.
Add a call to read_cache() early in fake_working_tree_commit(),
before calling convert_to_git().
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 5 Apr 2016 07:02:14 +0000 (00:02 -0700)]
Makefile: fix misdirected redirections
In general "echo 2>&1 $msg" to redirect a possible error message
that comes from 'echo' itself into the same standard output stream
$msg is getting written to does not make any sense; it is not like
we are expecting to see any errors out of 'echo' in these statements,
and even if it were the case, there is no reason to prevent the
error messages from being sent to the standard error stream.
These are clearly meant to send the argument given to echo to the
standard error stream as error messages. Correctly redirect by
saying "send what is written to the standard output to the standard
error", i.e. "1>&2" aka ">&2".
1. It always skips past "refs/remotes/", instead of
skipping past the prefix associated with the branch we
are showing (so commonly we see "refs/remotes/" for the
refs/remotes/origin/HEAD symref, but the previous code
would skip "refs/heads/" when showing a symref it found
in refs/heads/.
2. If skip_prefix() does not match, it leaves "desc"
untouched, and we show whatever happened to be in it
(which is the refname from a call to skip_prefix()
earlier in the function).
3. If we do match with skip_prefix(), we stomp on the
"desc" variable, which is later passed to
add_verbose_info(). We probably want to retain the
original refname there (though it likely doesn't matter
in practice, since after all, one points to the other).
The fix to match the original code is fairly easy: record
the prefix to strip based on item->kind, and use it here.
However, since we already have a local variable named "prefix",
let's give the two prefixes verbose names so we don't
confuse them.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sat, 2 Apr 2016 19:03:14 +0000 (21:03 +0200)]
Windows: shorten code by re-using convert_slashes()
Make a few more spots more readable by using the recently introduced,
Windows-specific helper.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Sunshine [Sun, 27 Mar 2016 21:26:07 +0000 (17:26 -0400)]
git-format-patch.txt: don't show -s as shorthand for multiple options
git-format-patch recognizes -s as shorthand only for --signoff, however,
its documentation shows -s as shorthand for both --signoff and
--no-patch. Resolve this confusion by suppressing the bogus -s shorthand
for --no-patch.
While here, also avoid showing the --no-patch option in git-format-patch
documentation since it doesn't make sense to ask to suppress the patch
while at the same time explicitly asking to format the patch (which,
after all, is the purpose of git-format-patch).
Reported-by: Kevin Brodsky <corax26@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kazuki Yamaguchi [Sun, 27 Mar 2016 14:37:14 +0000 (23:37 +0900)]
branch -m: update all per-worktree HEADs
When renaming a branch, currently only the HEAD of current working tree
is updated, but it must update HEADs of all working trees which point at
the old branch.
This is the current behavior, /path/to/wt's HEAD is not updated:
Kazuki Yamaguchi [Sun, 27 Mar 2016 14:37:13 +0000 (23:37 +0900)]
refs: add a new function set_worktree_head_symref
Add a new function set_worktree_head_symref, to update HEAD symref for
the specified worktree.
To update HEAD of a linked working tree,
create_symref("worktrees/$work_tree/HEAD", "refs/heads/$branch", msg)
could be used. However when it comes to updating HEAD of the main
working tree, it is unusable because it uses $GIT_DIR for
worktree-specific symrefs (HEAD).
The new function takes git_dir (real directory) as an argument, and
updates HEAD of the working tree. This function will be used when
renaming a branch.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Acked-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file was renamed in 4ad21f5 (README: use markdown syntax,
2016-02-25), but that commit forgot to update git.spec.in, which
caused the rpmbuild target in the Makefile to fail.
Reported-by: Ron Isaacson <isaacson.ljits@gmail.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 1 Apr 2016 19:23:16 +0000 (12:23 -0700)]
submodule--helper: do not borrow absolute_path() result for too long
absolute_path() is designed to allow its callers to take a brief
peek of the result (typically, to be fed to functions like
strbuf_add() and relative_path() as a parameter) without having to
worry about freeing it, but the other side of the coin of that
memory model is that the caller shouldn't rely too much on the
result living forever--there may be a helper function the caller
subsequently calls that makes its own call to absolute_path(),
invalidating the earlier result.
Use xstrdup() to make our own copy, and free(3) it when we are done.
While at it, remove an unnecessary sm_gitdir_rel variable that was
only used to as a parameter to call absolute_path() and never used
again.
Stefan Beller [Fri, 1 Apr 2016 00:17:28 +0000 (17:17 -0700)]
submodule--helper, module_clone: always operate on absolute paths
When giving relative paths to `relative_path` to compute a relative path
from one directory to another, this may fail in `relative_path`.
Make sure both arguments to `relative_path` are always absolute.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Fri, 18 Mar 2016 12:30:41 +0000 (13:30 +0100)]
builtin/apply: handle parse_binary() failure
In parse_binary() there is:
forward = parse_binary_hunk(&buffer, &size, &status, &used);
if (!forward && !status)
/* there has to be one hunk (forward hunk) */
return error(_("unrecognized binary patch at line %d"), linenr-1);
so parse_binary() can return -1, because that's what error() returns.
Also parse_binary_hunk() sets "status" to -1 in case of error and
parse_binary() does "if (status) return status;".
In this case parse_chunk() should not add -1 to the patchsize it computes.
It is better for future libification efforts to make it just return -1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
