Martin Hunt [Wed, 3 Jul 2002 20:23:04 +0000 (20:23 +0000)]
2002-07-03 Martin M. Hunt <hunt@redhat.com>
* varobj.c (struct varobj_root): Change frame from CORE_ADDR to
struct frame_id.
(varobj_create): Store frame_id for root.
(varobj_gen_name): Use xasprintf.
(varobj_update): Save and restore frame using get_frame_id() and
frame_find_by_id().
(create_child): Use xasprintf.
(new_root_variable): Initialize frame_id.
(c_name_of_child): Use xasprintf. Call find_frame_by_id().
(c_value_of_variable): Use xasprintf. Move mem_fileopen call
to prevent memory leak.
Andrew Cagney [Wed, 3 Jul 2002 18:31:29 +0000 (18:31 +0000)]
* valops.c (hand_function_call): Move declaration of retbuf to
start of function, allocate using malloc, add a cleanup but before
the inf_status cleanup, cleanup the buffer. Rename local variable
old_chain to inf_status_cleanup.
Alan Modra [Tue, 2 Jul 2002 23:54:39 +0000 (23:54 +0000)]
* lib/ld-lib.exp (default_ld_nm): Run nm with LC_ALL=C to ensure
consistent sorting.
(run_dump_test): Likewise for objdump/nm/objcopy/readelf.
* ld-sh/sh64/sh64.exp (run_ld_link_tests): Likewise.
Joel Brobecker [Tue, 2 Jul 2002 19:08:55 +0000 (19:08 +0000)]
* frame.h (frame_address_in_block): New function.
* blockframe.c (frame_address_in_block): New function extracted
from get_frame_block().
(get_frame_block): Use frame_address_in_block().
(block_innermost_frame): Use frame_address_in_block() to match
the frame pc address against the block boundaries rather than
the frame pc directly. This prevents a failure when a frame pc
is actually a return-address pointing immediately after the end
of the given block.
* m68k-tdep.c (m68k_remote_breakpoint_from_pc): Add. Currently not
used in architecture vector. The default is
m68k_local_breakpoint_from_pc.
(m68k_local_breakpoint_from_pc): Add.
(enum): Add register numbers from tm-m68k.h.
(m68k_gdbarch_init): Add breakpoint_from_pc to architecture vector.
* config/m68k/tm-m68k.h (GDB_MULTI_ARCH): Set to
GDB_MULTI_ARCH_PARTIAL.
(BPT_VECTOR, REGISTER_BYTES_FP, REGISTER_BYTES_NOFP)
(NUM_FREGS, SIG_PC_FP_OFFSET, SP_ARG0, REMOTE_BPT_VECTOR): Move to
m68k-tdep.c.
(BREAKPOINT, REMOTE_BREAKPOINT): Remove.
(A1_REGNUM, FP0_REGNUM, FPC_REGNUM, FPS_REGNUM, FPI_REGNUM): Move
to enum in m68k-tdep.c
Joel Brobecker [Tue, 2 Jul 2002 17:05:28 +0000 (17:05 +0000)]
* solib-osf.c (open_map): Compute the list of shared libraries
loaded by the inferior, rather than the list of libraries loaded
by GDB itself. Otherwise, GDB ends up reading the symbols from
the wrong shared libraries...
Mark Kettenis [Tue, 2 Jul 2002 09:12:37 +0000 (09:12 +0000)]
* i386-tdep.c (i386_frameless_signal_p): New function.
(i386_frame_chain): Deal with frameless signals.
(i386_sigtramp_saved_sp): New function.
(i386_frame_saved_pc): Deal with frameless signals.
(i386_saved_pc_after_call): Make sure the correct value is
returned just after entry into a sigtramp.
* i386bsd-tdep.c (i386bsd_sc_sp_offset, i386nbsd_sc_sp_offset,
i386fbsd4_sc_sp_offset): New variables.
(i386bsd_init_abi, i386nbsd_init_abi, i386fbsd4_init_abi): Use
these variables to initialize tdep->sc_sp_offset. * i386bsd-nat.c
(_initialize_i386bsd_nat): Add sanity check for sc_sp_offset
similiar to what we already did for sc_pc_offset.
* i386-sol2-tdep.c (i386_sol2_init_abi): Initialize
tdep->sc_sp_offset.
2002-07-02 Martin Schwidefsky <schwidefsky@de.ibm.com>
* elf64-s390.c (create_got_section): Set .got section alignment to
8 bytes.
(elf_s390_check_relocs): Set .rela.dyn section alignment to 8 bytes.
2002-07-02 Martin Schwidefsky <schwidefsky@de.ibm.com>
* config/tc-s390.c (tc_s390_fix_adjustable): Prevent any adjustment
to symbols in merge sections, even non pc-relative ones.
* elfxx-mips.c (ABI_64_P): Fix comment.
(MIPS_ELF_OPTIONS_SECTION_NAME,MIPS_ELF_STUB_SECTION_NAME): Use the
new section names for N64 ABI.
(mips_elf_output_extsym): No special _gp_disp handling for NewABI.
(mips_elf_calculate_relocation): Code formatting.
(mips_elf_create_dynamic_relocation): Likewise.
(_bfd_mips_elf_fake_sections): IRIX6 needs this hack, too.
(_bfd_mips_elf_size_dynamic_sections): Handle GOT_PAGE for any NewABI.
(_bfd_mips_elf_relocate_section): No special handling for R_MIPS_64
in any NewABI.
(_bfd_mips_elf_finish_dynamic_symbol): No special _gp_disp handling
for NewABI.
(_bfd_mips_elf_modify_segment_map): Handle any N64 ABI.
(_bfd_mips_elf_gc_sweep_hook): NewABI GOT relocs should be handled
here, too.
Mark Kettenis [Mon, 1 Jul 2002 09:13:09 +0000 (09:13 +0000)]
* config/i386/tm-i386sol2.h (COERCE_FLOAT_TO_DOUBLE): Removed.
* i386-sol2-tdep.c (i386_sol2_init_abi): Adjust for the removal of
this macro. Include "value.h".
Mark Kettenis [Sun, 30 Jun 2002 14:43:24 +0000 (14:43 +0000)]
* config/i386/tm-fbsd.h [!SVR4_SHARED_LIBS]
(IN_SOLIB_CALL_TRAMPOLINE): Remove define.
* config/i386/tm-nbsdaout.h (IN_SOLIB_CALL_TRAMPOLINE): Remove
define.
* i386bsd-tdep.c: Include "arch-utils.h".
(i386bsd_aout_in_solib_call_trampoline): New function.
(i386bsd_init_abi): Set in_solib_call_trampoline to
i386bsd_aout_in_solib_call_trampoline.
(i386nbsdelf_init_abi, i386fbsd_init_abi): Set
in_solib_call_trampoline to generic_in_solib_call_trampoline.
Andrew Cagney [Fri, 28 Jun 2002 22:38:29 +0000 (22:38 +0000)]
* blockframe.c (generic_find_dummy_frame): Change return type to
``struct regcache''.
(struct dummy_frame): Replace field ``registers'' with regcache, a
struct regcache object.
(generic_find_dummy_frame): Update.
(generic_push_dummy_frame): Update. Use regcache_xfree,
regcache_xmalloc and regcache_cpy.
(generic_pop_dummy_frame): Update. Use regcache_cpy and
regcache_xfree.
(deprecated_generic_find_dummy_frame): Update.
(generic_read_register_dummy): Update. Use
regcache_read_as_address.
(generic_call_dummy_register_unwind): Update. Use regcache_read.
(generic_get_saved_register): Update. Use regcache_read.
Jeff Law [Thu, 27 Jun 2002 22:57:02 +0000 (22:57 +0000)]
* elf64-hppa.c (elf64_hppa_reloc_type_class): New function.
(elf64_hppa_finish_dynamic_sections): Check other_rel_sec, dlt_rel_sec
and opd_rel_sec in order for starting rela section. Check _raw_size.
(elf_backend_reloc_type_class): Define.
Tom Tromey [Wed, 26 Jun 2002 20:58:17 +0000 (20:58 +0000)]
* command.h (add_setshow_cmd): Declare.
(add_setshow_cmd_full): Declare.
* cli/cli-decode.c (add_setshow_cmd): No longer static. Now
returns void. Use add_setshow_cmd_full.
(add_setshow_cmd_full): New function.
(add_setshow_auto_boolean_cmd): Use add_setshow_cmd_full.
(add_setshow_boolean_cmd): Likewise.
Grace Sainsbury [Wed, 26 Jun 2002 17:09:30 +0000 (17:09 +0000)]
* config/m68k/tm-m68k.h: Rearrange code so macros not in the
gdbarch vector are at the top.
(NUM_REGS): Remove.
(FP_REGNUM, SP_REGNUM, PS_REGNUM, PC_REGNUM, FP0_REGNUM): Remove.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Remove.
(FRAME_ARGS_SKIP): Remove.
* m68k-tdep.c (enum): Add eumeration of special register numbers.
(m68k_gdbarch_init): Add gdbarch initializations for macros
undefined in tm-m68k.h
Jason Thorpe [Wed, 26 Jun 2002 16:07:16 +0000 (16:07 +0000)]
* Makefile.in (vax_tdep_h): Define.
(vax-tdep.o): Use $(vax_tdep_h).
* vax-tdep.c (vax_gdbarch_init): Use generic OS ABI framework.
(vax_dump_tdep): New function.
(_initialize_vax_tdep): Register vax_dump_tdep.
* vax-tdep.h: Include osabi.h.
(struct gdbarch_tdep): New.
Grace Sainsbury [Wed, 26 Jun 2002 15:14:32 +0000 (15:14 +0000)]
* monitor.h: Add the function regname to monitor_ops
structure. This way NUM_REGS does not have to be a constant.
* monitor.c (monitor_fetch_register): Added support for regname
function. The function is called if the array regnames is NULL.
(monitor_store_register): Same.
* cpu32bug-rom.c (cpu32bug_regname): Add function. Replaces regnames array.
(init_cpu32bug_cmds): set cpu32bug_cmds.regnames to NULL,
cpu32bug_cmds.regname to point to new function.
* abug-rom.c (abug_regname): Same as above.
(init_abug_cmds): Same.
* dbug-rom.c (dbug_regname): Same as above.
(init_dbug_cmds): Same.
* remote-est.c (est_regname): Same.
(init_est_cmds): Same.
* rom68k-rom.c (rom68k_regname): Same.
(init_rom68k_cmds): Same.