Scott Bambrough [Fri, 7 Apr 2000 22:26:11 +0000 (22:26 +0000)]
2000-04-07 Scott Bambrough <scottb@netwinder.org>
* ChangeLog: Correct date on last entry.
* arm-linux-tdep.c (arm_linux_push_arguments): New function.
* config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.
* config/arm/tm-embed: Fix build warning from redefinition of
LOWEST_PC.
* config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
* config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and
TARGET_BYTE_ORDER. Add TARGET_BYTE_ORDER_SELECTABLE_P to
override default in tm-arm.h. Use default target byte order
from tm-arm.h.
Jim Wilson [Fri, 7 Apr 2000 18:36:04 +0000 (18:36 +0000)]
Fix linker segfault that occured when linking ia64-linux kernel.
* dwarf2.c (struct dwarf2_debug): New field dwarf_line_size.
(decode_line_info): Set it. Report error if unit->line_offset is
equal to or larger than it.
Peter Schauer [Fri, 7 Apr 2000 17:18:57 +0000 (17:18 +0000)]
* sol-thread.c (gdb_ps_addr_t): New typedef, depends on definition
of PROC_SERVICE_IS_OLD.
(ps_pglobal_lookup, ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite,
rw_common): Change argument type from psaddr_t to gdb_ps_addr_t.
Andrew Cagney [Fri, 7 Apr 2000 04:33:21 +0000 (04:33 +0000)]
From 2000-03-27 Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
* procfs.c (init_procfs_ops): Set procfs_ops.to_has_memory and
procfs_ops.to_has_all_memory to 1.
Nicholas Duffek [Fri, 7 Apr 2000 01:16:17 +0000 (01:16 +0000)]
* configure.in (_MSE_INT_H): Define on Solaris 7.
(NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
* acconfig.h (_MSE_INT_H): Define on Solaris 7.
* configure: Regenerate.
* config.in: Regenerate.
Nicholas Duffek [Fri, 7 Apr 2000 01:14:10 +0000 (01:14 +0000)]
* sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
Change to rely on PIDGET etc.
* config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
define. Allow target to use procfs hardware watchpoints.
* config/sparc/nm-sun4sol2.h: ditto.
* config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
definitions to use 16 bits for the pid, 15 bits for the tid, and
1 bit for the flag.
* config/sparc/tm-sun4sol2.h: ditto.
(SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
* testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
for more than 15 thread increments.
opcodes:
* sh-opc.c (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
stc GBR,@-<REG_N> is available for arch_sh1_up.
Group parallel processing insn with identical mnemonics together.
Make three-operand psha / pshl come first.
gas:
* config/tc-sh.c (get_operands): There's no third operand if the
first operand is an immediate.
* sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
(sh_arg_type): Add A_PC.
(sh_table): Update entries using immediates. Add repeat.
* sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
gas:
* config/tc-sh.c (immediate): Delete.
(sh_operand_info): Add immediate member.
(parse_reg): Use A_PC for pc.
(parse_exp): Add second argument 'op'. All callers changed.
(parse_at): Expect pc to be coded as A_PC.
Use immediate field in *op.
(insert): Add fourth argument 'op'. All callers changed.
(build_relax): Add second argument 'op'. All callers changed.
(insert_loop_bounds): New function.
(build_Mytes): Remove DISP_4.
Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
(assemble_ppi): Use immediate field in *operand.
(sh_force_relocation): Handle BFD_RELOC_SH_LOOP_{START,END}.
(md_apply_fix): Likewise.
(tc_gen_reloc): Likewise. Check for a pcrel BFD_RELOC_SH_LABEL.
include/coff:
* sh.h (R_SH_LOOP_START, R_SH_LOOP_END): Define.
include/elf:
* sh.h (R_SH_LOOP_START, R_SH_LOOP_END): New RELOC_NUMBERs.
bfd:
* reloc.c (_bfd_relocate_contents): Add BFD_RELOC_SH_LOOP_START and
BFD_RELOC_SH_LOOP_END.
* elf32-sh.c (sh_elf_howto_tab): Change special_func to
sh_elf_ignore_reloc for all entries that sh_elf_reloc used to ignore.
Add entries for R_SH_LOOP_START and R_SH_LOOP_END.
(sh_elf_reloc_loop): New function.
(sh_elf_reloc): No need to test for always-to-be-ignored relocs
any more.
(sh_rel): Add entries for BFD_RELOC_SH_LOOP_{START,END}.
(sh_elf_relocate_section): Handle BFD_RELOC_SH_LOOP_{START,END}.
* bfd-in2.h, libbfd.h: Regenerate.
Jim Blandy [Wed, 5 Apr 2000 20:40:22 +0000 (20:40 +0000)]
* solib.c (update_solib_list): New function.
(solib_add): Call update_solib_list, and then read symbols.
(info_sharedlibrary_command): Call update_solib_list, not
solib_add.
Scott Bambrough [Wed, 5 Apr 2000 17:24:08 +0000 (17:24 +0000)]
2000-04-05 Scott Bambrough <scottb@netwinder.org>
* arm-linux-tdep.c: Resolve implicit function declarations by
including target.h and value.h. Inclusion of symtab.h is
no longer needed.
* ChangeLog: Fix formatting of previous entry.
Scott Bambrough [Wed, 5 Apr 2000 15:38:05 +0000 (15:38 +0000)]
Unable to build x86 hosted debugger for ARM Linux, due to missing target
dependencies. Created ARM Linux specific arm-linux-tdep.c file and moved
missing code into it from arm-linux-nat.c.
2000-04-05 Scott Bambrough <scottb@netwinder.org>
* arm-linux-tdep.c: New file.
* arm-linux-nat.c (fetch_fpregs): Remove unused code.
(arm_get_longjmp_target): Moved it and all defines
it uses to arm-linux-tdep.c.
(arm_linux_extract_return_value): Moved to
arm-linux-tdep.c.
* config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.
* config/tc-mn10300.c (md_pseudo_table): Use constant names.
(md_begin): Likewise.
(HAVE_AM33): New macro.
(md_assemble): Use it. Match r_regs and xr_regs only if
HAVE_AM33.
Jim Blandy [Mon, 3 Apr 2000 17:45:17 +0000 (17:45 +0000)]
* solib.c (solib_add): Move all the code for loading symbol tables
below the code to sort out additions and removals. That way, we
always catch all loaded shared libraries whose symbols we haven't
grabbed yet.
* solib.c (solib_add): Don't try to free a shared object's objfile
if it doesn't have one. Duh.
* solib.c (solib_add): If a pattern was given, but it doesn't
match any currently loaded shared libraries, print a message;
don't just be silent.
* config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
definition (and use the common one in tm-i386.h).
(REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
(I386_DJGPP_TARGET): Don't define, it's no longer required.
(LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
i386-tdep.c defines it for all x86 targets.
(LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
* aoutx.h (NAME(aout,reloc_type_lookup)): Add BFD_RELOC_8 and
BFD_RELOC_16 to switch for extended relocs.
(MY_swap_ext_reloc_in): New.
(MY_swap_ext_reloc_out): New.
(NAME(aout,slurp_reloc_table)): Use MY_swap_ext_reloc_in rather
than NAME(aout,swap_ext_reloc_in) for extended relocs.
(NAME(aout,squirt_out_relocs)): Similarly use
MY_swap_ext_reloc_out.
(aout_link_reloc_link_order): Use MY_put_ext_reloc if defined.
Nicholas Duffek [Mon, 3 Apr 2000 03:39:09 +0000 (03:39 +0000)]
* gdbtypes.c (safe_parse_type): New wrapper function to ignore
error() during parse_and_eval_type().
(check_stub_method): Call safe_parse_type instead of
parse_and_eval_type().
* wrapper.c (gdb_parse_and_eval_type): New wrapper function.
(wrap_parse_and_eval_type): New support function.
* wrapper.h (gdb_parse_and_eval_type): Prototype.
(wrap_parse_and_eval_type): Prototype.
* gdbarch.c, gdbarch.sh: Include "gdbarch-utils.h". Fix code
handling default method values.
(startup_gdbarch): Rename default_gdbarch, name misleading.
(breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
(register_name): Default to legacy_register_name.
(call_dummy_words): Default to legacy_call_dummy_words.
(sizeof_call_dummy_words): Default to
legacy_sizeof_call_dummy_words.
(register_convertible): Default to
generic_register_convertible_not.
(breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
(remote_translate_xfer_address): Default to
generic_remote_translate_xfer_address.
(frameless_function_invocation): Default to
generic_frameless_function_invocation_not.
* config/tc-d30v.c (check_range): Allow signed or unsigned 32-bit
quantities. Correct right shift sign extension.
(build_insn): Make `number' unsigned long. Mask top 6 bits of
32-bit value when shifting into place.
* gas/mn10300/am33_5.s: Check that negative SP offsets are encoded
with 32 bits, not with the unsigned shorter opcodes.
* gas/mn10300/basic.exp: Likewise.