Linus Torvalds [Fri, 2 Feb 2024 20:50:44 +0000 (12:50 -0800)]
Merge tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes, mostly device-specific ones:
- Minor PCM core fix for name strings
- ASoC Qualcomm fixes, including DAI support extensions
- ASoC AMD platform updates
- ASoC Allwinner platform updates
- Various ASoC codec fixes for WSA, WCD, ES8326 drivers
- Various HD-audio and USB-audio fixes and quirks
- A series of fixes for Cirrus CS35L56 codecs"
* tag 'sound-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
ALSA: usb-audio: Ignore clock selector errors for single connection
ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL
ALSA: hda: cs35l56: Remove unused test stub function
ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
ALSA: hda: cs35l56: Fix filename string field layout
ALSA: hda: cs35l56: Fix order of searching for firmware files
ASoC: cs35l56: Allow more time for firmware to boot
ASoC: cs35l56: Load tunings for the correct speaker models
ASoC: cs35l56: Firmware file must match the version of preloaded firmware
ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
ASoC: cs35l56: Fix for initializing ASP1 mixer registers
ALSA: hda: cs35l56: Initialize all ASP1 registers
ASoC: cs35l56: Fix default SDW TX mixer registers
ASoC: cs35l56: Fix to ensure ASP1 registers match cache
ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
ASoC: cs35l56: Don't add the same register patch multiple times
ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adsp
ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
ASoC: wm_adsp: Don't overwrite fwf_name with the default
ASoC: wm_adsp: Fix firmware file search order
...
Linus Torvalds [Fri, 2 Feb 2024 20:46:35 +0000 (12:46 -0800)]
Merge tag 'for-v6.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fix from Sebastian Reichel:
- qcom_battmgr: revert broken fix
* tag 'for-v6.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
Revert "power: supply: qcom_battmgr: Register the power supplies after PDR is up"
Linus Torvalds [Fri, 2 Feb 2024 20:43:51 +0000 (12:43 -0800)]
Merge tag 'iommu-fixes-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pul iommu fixes from Joerg Roedel:
- Make iommu_ops->default_domain work without CONFIG_IOMMU_DMA to fix
initialization of FSL-PAMU devices
- Fix for Tegra fbdev initialization failure
- Fix for a VFIO device unbinding failure on PowerPC
* tag 'iommu-fixes-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
powerpc: iommu: Bring back table group release_ownership() call
drm/tegra: Do not assume that a NULL domain means no DMA IOMMU
iommu: Allow ops->default_domain to work when !CONFIG_IOMMU_DMA
Linus Torvalds [Fri, 2 Feb 2024 18:58:25 +0000 (10:58 -0800)]
Merge tag 'for-6.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM ioctl interface to avoid INT_MAX overflow warnings from
kvmalloc by limiting the number of targets and parameter size area.
- Fix DM stats to avoid INT_MAX overflow warnings from kvmalloc by
limiting the number of entries supported.
- Fix DM writecache to support mapping devices larger than 1 TiB by
switching from using kvmalloc_array to vmalloc_array -- which avoids
INT_MAX overflow in kvmalloc_node and associated warnings.
- Remove the (ab)use of tasklets from both the DM crypt and verity
targets. They will be converted to use BH workqueue in future.
* tag 'for-6.8/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt, dm-verity: disable tasklets
dm writecache: allow allocations larger than 2GiB
dm stats: limit the number of entries
dm: limit the number of targets and parameter size area
Linus Torvalds [Fri, 2 Feb 2024 18:52:56 +0000 (10:52 -0800)]
Merge tag 'ata-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Following up on last week's ASMedia ASM1061 43-bit dma_mask quirk, we
sent an email to ASMedia developers that have previously been active
on the mailing list, asking exactly which SATA controllers that are
affected by this hardware limitation.
We got a reply that it affects all the SATA controllers in the
ASM106x family, thus extend the existing 43-bit dma_mask quirk to
apply to all the affected ASMedia SATA controllers.
* tag 'ata-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts
In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.
So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.
Linus Torvalds [Fri, 2 Feb 2024 18:49:28 +0000 (10:49 -0800)]
Merge tag 'block-6.8-2024-02-01' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Remove duplicated enums (Guixen)
- Use appropriate controller state accessors (Keith)
- Retryable authentication (Hannes)
- Add missing module descriptions (Chaitanya)
- Fibre-channel fixes for blktests (Daniel)
- Various type correctness updates (Caleb)
- Improve fabrics connection debugging prints (Nitin)
- Passthrough command verbose error logging (Adam)
- Fix for where we set IO priority in the bio for drivers that use
fops->submit_bio() to queue IO, like md/dm etc.
* tag 'block-6.8-2024-02-01' of git://git.kernel.dk/linux: (32 commits)
block: Fix where bio IO priority gets set
nvme: allow passthru cmd error logging
nvme-fc: show hostnqn when connecting to fc target
nvme-rdma: show hostnqn when connecting to rdma target
nvme-tcp: show hostnqn when connecting to tcp target
nvmet-fc: use RCU list iterator for assoc_list
nvmet-fc: take ref count on tgtport before delete assoc
nvmet-fc: avoid deadlock on delete association path
nvmet-fc: abort command when there is no binding
nvmet-fc: do not tack refs on tgtports from assoc
nvmet-fc: remove null hostport pointer check
nvmet-fc: hold reference on hostport match
nvmet-fc: free queue and assoc directly
nvmet-fc: defer cleanup using RCU properly
nvmet-fc: release reference on target port
nvmet-fcloop: swap the list_add_tail arguments
nvme-fc: do not wait in vain when unloading module
nvme-fc: log human-readable opcode on timeout
nvme: split out fabrics version of nvme_opcode_str()
nvme: take const cmd pointer in read-only helpers
...
Linus Torvalds [Fri, 2 Feb 2024 18:45:17 +0000 (10:45 -0800)]
Merge tag 'io_uring-6.8-2024-02-01' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix for missing retry for read multishot.
If we trigger the execution of it and there's more than one buffer to
be read, then we don't always read more than the first one. As it's
edge triggered, this can lead to stalls.
- Limit inline receive multishot retries for fairness reasons.
If we have a very bursty socket receiving data, we still need to
ensure we process other requests as well. This is really two minor
cleanups, then adding a way for poll reissue to trigger a requeue,
and then finally having multishot receive utilize that.
- Fix for a weird corner case for non-multishot receive with
MSG_WAITALL, using provided buffers, and setting the length to
zero (to let the buffer dictate the receive size).
* tag 'io_uring-6.8-2024-02-01' of git://git.kernel.dk/linux:
io_uring/net: fix sr->len for IORING_OP_RECV with MSG_WAITALL and buffers
io_uring/net: limit inline multishot retries
io_uring/poll: add requeue return code from poll multishot handling
io_uring/net: un-indent mshot retry path in io_recv_finish()
io_uring/poll: move poll execution helpers higher up
io_uring/rw: ensure poll based multishot read retries appropriately
Linus Torvalds [Fri, 2 Feb 2024 18:40:50 +0000 (10:40 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two small fixes.
The first one is an alternative fix for the SCS patching problem we
thought we'd fixed in -rc1; it turned out not to be robust with all
toolchains/configs, so this is a revert+retry which has seen some more
testing.
The other one simply removes an unused header file, but I couldn't
resist the negative diffstat.
- Really fix shadow call stack patching with LTO=full
- Remove unused (empty) header file generated from the compat vDSO"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vdso32: Remove unused vdso32-offsets.h
arm64: scs: Disable LTO for SCS patching code
arm64: Revert "scs: Work around full LTO issue with dynamic SCS"
Werner Sembach [Tue, 5 Dec 2023 16:36:01 +0000 (17:36 +0100)]
Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
When closing the laptop lid with an external screen connected, the mouse
pointer has a constant movement to the lower right corner. Opening the
lid again stops this movement, but after that the touchpad does no longer
register clicks.
The touchpad is connected both via i2c-hid and PS/2, the predecessor of
this device (NS70MU) has the same layout in this regard and also strange
behaviour caused by the psmouse and the i2c-hid driver fighting over
touchpad control. This fix is reusing the same workaround by just
disabling the PS/2 aux port, that is only used by the touchpad, to give the
i2c-hid driver the lone control over the touchpad.
Mikulas Patocka [Wed, 31 Jan 2024 20:57:27 +0000 (21:57 +0100)]
dm-crypt, dm-verity: disable tasklets
Tasklets have an inherent problem with memory corruption. The function
tasklet_action_common calls tasklet_trylock, then it calls the tasklet
callback and then it calls tasklet_unlock. If the tasklet callback frees
the structure that contains the tasklet or if it calls some code that may
free it, tasklet_unlock will write into free memory.
The commits 8e14f610159d and d9a02e016aaf try to fix it for dm-crypt, but
it is not a sufficient fix and the data corruption can still happen [1].
There is no fix for dm-verity and dm-verity will write into free memory
with every tasklet-processed bio.
There will be atomic workqueues implemented in the kernel 6.9 [2]. They
will have better interface and they will not suffer from the memory
corruption problem.
But we need something that stops the memory corruption now and that can be
backported to the stable kernels. So, I'm proposing this commit that
disables tasklets in both dm-crypt and dm-verity. This commit doesn't
remove the tasklet support, because the tasklet code will be reused when
atomic workqueues will be implemented.
powerpc: iommu: Bring back table group release_ownership() call
The commit 2ad56efa80db ("powerpc/iommu: Setup a default domain and
remove set_platform_dma_ops") refactored the code removing the
set_platform_dma_ops(). It missed out the table group
release_ownership() call which would have got called otherwise
during the guest shutdown via vfio_group_detach_container(). On
PPC64, this particular call actually sets up the 32-bit TCE table,
and enables the 64-bit DMA bypass etc. Now after guest shutdown,
the subsequent host driver (e.g megaraid-sas) probe post unbind
from vfio-pci fails like,
megaraid_sas 0031:01:00.0: Warning: IOMMU dma not supported: mask 0x7fffffffffffffff, table unavailable
megaraid_sas 0031:01:00.0: Warning: IOMMU dma not supported: mask 0xffffffff, table unavailable
megaraid_sas 0031:01:00.0: Failed to set DMA mask
megaraid_sas 0031:01:00.0: Failed from megasas_init_fw 6539
The patch brings back the call to table_group release_ownership()
call when switching back to PLATFORM domain from BLOCKED, while
also separates the domain_ops for both.
Hans de Goede [Fri, 26 Jan 2024 16:07:24 +0000 (17:07 +0100)]
Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") not only the getid command is skipped, but also
the de-activating of the keyboard at the end of atkbd_probe(), potentially
re-introducing the problem fixed by commit be2d7e4233a4 ("Input: atkbd -
fix multi-byte scancode handling on reconnect").
Make sure multi-byte scancode handling on reconnect is still handled
correctly by not skipping the atkbd_deactivate() call.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hans de Goede [Fri, 26 Jan 2024 16:07:23 +0000 (17:07 +0100)]
Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in
translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models
has stopped working after a suspend/resume.
The problem appears to be that atkbd_probe() fails when called
from atkbd_reconnect() on resume, which on systems where
ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS
failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was
skipped is weird, but apparently that is what is happening.
Fix this by also skipping ATKBD_CMD_SETLEDS when skipping
ATKBD_CMD_GETID.
Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517 Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Thu, 1 Feb 2024 22:57:17 +0000 (14:57 -0800)]
Kconfig: Disable -Wstringop-overflow for GCC globally
It turns out it was never just gcc-11 that was broken. Apparently it
just happens to work on x86-64 with other gcc versions.
On arm64, I see warnings with gcc version 13.2.1, and the kernel test
robot reports the same problem on s390 with gcc 13.2.0.
Admittedly it seems to be just the new Xe drm driver, but this is
keeping me from doing my normal arm64 build testing. So it gets
reverted until somebody figures out what causes the problem (and why it
doesn't show on x86-64, which is what makes me suspect it was never just
about gcc-11, and more about just random happenstance).
This also changes the Kconfig naming a bit - just make the "disable this
for GCC" conditional be one simple Kconfig entry, and we can put the gcc
version dependencies in that entry once we figure out what the correct
rules are.
The version dependency _may_ still end up being "gcc version larger than
11" if the issue is purely in the Xe driver, but even if that ends up
the case, let's make that all part of the "GCC_NO_STRINGOP_OVERFLOW"
logic.
For now, we just disable it for all gcc versions while the exact cause
is unknown.
Linus Torvalds [Thu, 1 Feb 2024 20:39:54 +0000 (12:39 -0800)]
Merge tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the
REPLY direction, otherwise SYN retransmissions trigger incorrect
window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx
zerocopy path, we only support basic NIC -> user, no page cache
pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do
wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
Linus Torvalds [Thu, 1 Feb 2024 20:32:43 +0000 (12:32 -0800)]
Merge tag 'parisc-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"The current exception handler, which helps on kernel accesses to
userspace, may exhibit data corruption. The problem is that it is not
guaranteed that the compiler will use the processor register we
specified in the source code, but may choose another register which
then will lead to silent register- and data corruption. To fix this
issue we now use another strategy to help the exception handler to
always find and set the error code into the correct CPU register.
The other fixes are small: fixing CPU hotplug bringup, fix the page
alignment of the RO_DATA section, added a check for the calculated
cache stride and fix possible hangups when printing longer output at
bootup when running on serial console.
Most of the patches are tagged for stable series.
- Fix random data corruption triggered by exception handler
- Fix crash when setting up BTLB at CPU bringup
- Prevent hung tasks when printing inventory on serial console
- Make RO_DATA page aligned in vmlinux.lds.S
- Add check for valid cache stride size"
* tag 'parisc-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: BTLB: Fix crash when setting up BTLB at CPU bringup
parisc: Fix random data corruption from exception handler
parisc: Drop unneeded semicolon in parse_tree_node()
parisc: Prevent hung tasks when printing inventory on serial console
parisc: Check for valid stride size for cache flushes
parisc: Make RO_DATA page aligned in vmlinux.lds.S
Linus Torvalds [Thu, 1 Feb 2024 19:57:42 +0000 (11:57 -0800)]
Merge tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix UML build with clang-18 and newer
- Avoid using the alias attribute in host programs
- Replace tabs with spaces when followed by conditionals for future GNU
Make versions
- Fix rpm-pkg for the systemd-provided kernel-install tool
- Fix the undefined behavior in Kconfig for a 'int' symbol used in a
conditional
* tag 'kbuild-fixes-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: initialize sym->curr.tri to 'no' for all symbol types again
kbuild: rpm-pkg: simplify installkernel %post
kbuild: Replace tabs with spaces when followed by conditionals
modpost: avoid using the alias attribute
kbuild: fix W= flags in the help message
modpost: Add '.ltext' and '.ltext.*' to TEXT_SECTIONS
um: Fix adding '-no-pie' for clang
kbuild: defconf: use SRCARCH to find merged configs
Takashi Iwai [Thu, 1 Feb 2024 18:40:42 +0000 (19:40 +0100)]
Merge tag 'asoc-fix-v6.8-rc2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
This pull request adds Richard Fitzgerald's series with extensive fixes
for the CS35L56, he said:
These patches fix various things that were undocumented, unknown or
uncertain when the original driver code was written. And also a few
things that were just bugs.
Linus Torvalds [Thu, 1 Feb 2024 18:19:34 +0000 (10:19 -0800)]
Merge tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- cleanups in the error path in hid-steam (Dan Carpenter)
- fixes for Wacom tablets selftests that sneaked in while the CI was
taking a break during the year end holidays (Benjamin Tissoires)
- null pointer check in nvidia-shield (Kunwu Chan)
- memory leak fix in hidraw (Su Hui)
- another null pointer fix in i2c-hid-of (Johan Hovold)
- another memory leak fix in HID-BPF this time, as well as a double
fdget() fix reported by Dan Carpenter (Benjamin Tissoires)
- fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)
- new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
(Jiri Kosina)
* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: use __bpf_kfunc instead of noinline
HID: bpf: actually free hdev memory after attaching a HID-BPF program
HID: bpf: remove double fdget()
HID: i2c-hid-of: fix NULL-deref on failed power up
HID: hidraw: fix a problem of memory leak in hidraw_release()
HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
HID: nvidia-shield: Add missing null pointer checks to LED initialization
HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
selftests/hid: wacom: fix confidence tests
HID: hid-steam: Fix cleanup in probe()
HID: hid-steam: remove pointless error message
Linus Torvalds [Thu, 1 Feb 2024 18:12:53 +0000 (10:12 -0800)]
Merge tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"FireWire subsystem now supports the legacy layout of configuration
ROM, while it appears that some of DV devices in the early 2000's have
the legacy layout with a quirk. This includes some changes to handle
the quirk"
* tag 'firewire-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: search descriptor leaf just after vendor directory entry in root directory
firewire: core: correct documentation of fw_csr_string() kernel API
Linus Torvalds [Thu, 1 Feb 2024 18:06:55 +0000 (10:06 -0800)]
Merge tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The main set of fixes here are for the PWM regulator, fixing
bootstrapping issues on some platforms where the hardware setup looked
like it was out of spec for the constraints we have for the regulator
causing us to make spurious and unhelpful changes to try to bring
things in line with the constraints.
There's also a couple of other driver specific fixes"
* tag 'regulator-fix-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator (max5970): Fix IRQ handler
regulator: ti-abb: don't use devm_platform_ioremap_resource_byname for shared interrupt register
regulator: pwm-regulator: Manage boot-on with disabled PWM channels
regulator: pwm-regulator: Calculate the output voltage for disabled PWMs
regulator: pwm-regulator: Add validity checks in continuous .get_voltage
Linus Torvalds [Thu, 1 Feb 2024 18:00:28 +0000 (10:00 -0800)]
Merge tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fixes from Paul Moore:
"Two small patches to fix some problems relating to LSM hook return
values and how the individual LSMs interact"
* tag 'lsm-pr-20240131' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value of the socket_getpeersec_*() hooks
lsm: fix the logic in security_inode_getsecctx()
Hongyu Jin [Tue, 30 Jan 2024 20:26:34 +0000 (15:26 -0500)]
block: Fix where bio IO priority gets set
Commit 82b74cac2849 ("blk-ioprio: Convert from rqos policy to direct
call") pushed setting bio I/O priority down into blk_mq_submit_bio()
-- which is too low within block core's submit_bio() because it
skips setting I/O priority for block drivers that implement
fops->submit_bio() (e.g. DM, MD, etc).
Fix this by moving bio_set_ioprio() up from blk-mq.c to blk-core.c and
call it from submit_bio(). This ensures all block drivers call
bio_set_ioprio() during initial bio submission.
Fixes: a78418e6a04c ("block: Always initialize bio IO priority on submit") Co-developed-by: Yibin Ding <yibin.ding@unisoc.com> Signed-off-by: Yibin Ding <yibin.ding@unisoc.com> Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
[snitzer: revised commit header] Signed-off-by: Mike Snitzer <snitzer@kernel.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20240130202638.62600-2-snitzer@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark Brown [Thu, 1 Feb 2024 17:45:32 +0000 (17:45 +0000)]
ALSA: Various fixes for Cirrus Logic CS35L56 support
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These patches fixe various things that were undocumented, unknown or
uncertain when the original driver code was written. And also a few
things that were just bugs.
Jakub Kicinski [Thu, 1 Feb 2024 17:25:53 +0000 (09:25 -0800)]
Merge tag 'batadv-net-pullrequest-20240201' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix a timeout issue and a memory leak in batman-adv multicast,
by Linus Lüssing (2 patches)
* tag 'batadv-net-pullrequest-20240201' of git://git.open-mesh.org/linux-merge:
batman-adv: mcast: fix memory leak on deleting a batman-adv interface
batman-adv: mcast: fix mcast packet type counter on timeouted nodes
====================
Jakub Kicinski [Thu, 1 Feb 2024 17:14:13 +0000 (09:14 -0800)]
Merge tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) TCP conntrack now only evaluates window negotiation for packets in
the REPLY direction, from Ryan Schaefer. Otherwise SYN retransmissions
trigger incorrect window scale negotiation. From Ryan Schaefer.
2) Restrict tunnel objects to NFPROTO_NETDEV which is where it makes sense
to use this object type.
3) Fix conntrack pick up from the middle of SCTP_CID_SHUTDOWN_ACK packets.
From Xin Long.
4) Another attempt from Jozsef Kadlecsik to address the slow down of the
swap command in ipset.
5) Replace a BUG_ON by WARN_ON_ONCE in nf_log, and consolidate check for
the case that the logger is NULL from the read side lock section.
6) Address lack of sanitization for custom expectations. Restrict layer 3
and 4 families to what it is supported by userspace.
* tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations
netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger
netfilter: ipset: fix performance regression in swap operation
netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV
netfilter: conntrack: correct window scaling with retransmitted SYN
====================
idpf: avoid compiler padding in virtchnl2_ptype struct
In the arm random config file, kconfig option 'CONFIG_AEABI' is
disabled which results in adding the compiler flag '-mabi=apcs-gnu'.
This causes the compiler to add padding in virtchnl2_ptype
structure to align it to 8 bytes, resulting in the following
size check failure:
Avoid the compiler padding by using "__packed" structure
attribute for the virtchnl2_ptype struct. Also align the
structure by using "__aligned(2)" for better code optimization.
Fixes: 0d7502a9b4a7 ("virtchnl: add virtchnl version 2 ops") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312220250.ufEm8doQ-lkp@intel.com Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240131222241.2087516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
mptcp: fixes for recent issues reported by CI's
This series of 9 patches fixes issues mostly identified by CI's not
managed by the MPTCP maintainers. Thank you Linero (LKFT) and Netdev
maintainers (NIPA) for running our kunit and selftests tests!
For the first patch, it took a bit of time to identify the root cause.
Some MPTCP Join selftest subtests have been "flaky", mostly in slow
environments. It appears to be due to the use of a TCP-specific helper
on an MPTCP socket. A fix for kernels >= v5.15.
Patches 2 to 4 add missing kernel config to support NetFilter tables
needed for IPTables commands. These kconfigs are usually enabled in
default configurations, but apparently not for all architectures.
Patches 2 and 3 can be backported up to v5.11 and the 4th one up to
v5.19.
Patch 5 increases the time limit for MPTCP selftests. It appears that
many CI's execute tests in a VM without acceleration supports, e.g. QEmu
without KVM. As a result, the tests take longer. Plus, there are more
and more tests. This patch modifies the timeout added in v5.18.
Patch 6 reduces the maximum rate and delay of the different links in
some Simult Flows selftest subtests. The goal is to let slow VMs reach
the maximum speed. The original rate was introduced in v5.11.
Patch 7 lets CI changing the prefix of the subtests titles, to be able
to run the same selftest multiple times with different parameters. With
different titles, tests will be considered as different and not override
previous results as it is the case with some CI envs. Subtests have been
introduced in v6.6.
Patch 8 and 9 make some MPTCP Join selftest subtests quicker by stopping
the transfer when the expected events have been seen. Patch 8 can be
backported up to v6.5.
selftests: mptcp: join: stop transfer when check is done (part 2)
Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.
There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.
While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.
selftests: mptcp: join: stop transfer when check is done (part 1)
Since the "Fixes" commit mentioned below, "userspace pm" subtests of
mptcp_join selftests introduced in v6.5 are launching the whole transfer
in the background, do the required checks, then wait for the end of
transfer.
There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds in slow environments.
Note that old versions will need commit bdbef0a6ff10 ("selftests: mptcp:
add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait Cc: stable@vger.kernel.org # 6.5.x Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a CI executes the same selftest multiple times with different
options, all results from the same subtests will have the same title,
which confuse the CI. With the same title printed in TAP, the tests are
considered as the same ones.
Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST
env var, and have a different title.
While at it, use 'basename' to remove the suffix as well instead of
using an extra 'sed'.
When running the simult_flow selftest in slow environments -- e.g. QEmu
without KVM support --, the results can be unstable. This selftest
checks if the aggregated bandwidth is (almost) fully used as expected.
To help improving the stability while still keeping the same validation
in place, the BW and the delay are reduced to lower the pressure on the
CPU.
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests") Fixes: 219d04992b68 ("mptcp: push pending frames when subflow has free space") Cc: stable@vger.kernel.org Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On very slow environments -- e.g. when QEmu is used without KVM --,
mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the
default timeout by 50% as it seems normal to take that long on some
environments.
When a debug kernel config is used, this selftest will take even longer,
but that's certainly not a common test env to consider for the timeout.
The Fixes tag that has been picked here is there simply to help having
this patch backported to older stable versions. It is difficult to point
to the exact commit that made some env reaching the timeout from time to
time.
Paolo Abeni [Wed, 31 Jan 2024 21:49:46 +0000 (22:49 +0100)]
mptcp: fix data re-injection from stale subflow
When the MPTCP PM detects that a subflow is stale, all the packet
scheduler must re-inject all the mptcp-level unacked data. To avoid
acquiring unneeded locks, it first try to check if any unacked data
is present at all in the RTX queue, but such check is currently
broken, as it uses TCP-specific helper on an MPTCP socket.
Funnily enough fuzzers and static checkers are happy, as the accessed
memory still belongs to the mptcp_sock struct, and even from a
functional perspective the recovery completed successfully, as
the short-cut test always failed.
A recent unrelated TCP change - commit d5fed5addb2b ("tcp: reorganize
tcp_sock fast path variables") - exposed the issue, as the tcp field
reorganization makes the mptcp code always skip the re-inection.
Fix the issue dropping the bogus call: we are on a slow path, the early
optimization proved once again to be evil.
Fixes: 1e1d9d6f119c ("mptcp: handle pending data on closed subflow") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/468 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-1-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 1 Feb 2024 16:36:39 +0000 (08:36 -0800)]
Merge branch 'selftests-net-more-small-fixes'
Benjamin Poirier says:
====================
selftests: net: More small fixes
Some small fixes for net selftests which follow from these recent commits: dd2d40acdbb2 ("selftests: bonding: Add more missing config options") 49078c1b80b6 ("selftests: forwarding: Remove executable bits from lib.sh")
====================
Benjamin Poirier [Wed, 31 Jan 2024 14:08:48 +0000 (09:08 -0500)]
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Currently they are incorrectly listed
in TEST_PROGS_EXTENDED so rename the variable.
Fixes: c085dbfb1cfc ("selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED") Suggested-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-6-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Benjamin Poirier [Wed, 31 Jan 2024 14:08:47 +0000 (09:08 -0500)]
selftests: net: List helper scripts in TEST_FILES Makefile variable
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Move those utility scripts to
TEST_FILES.
Fixes: 1751eb42ddb5 ("selftests: net: use TEST_PROGS_EXTENDED") Fixes: 25ae948b4478 ("selftests/net: add lib.sh") Fixes: b99ac1841147 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile") Fixes: f5173fe3e13b ("selftests: net: included needed helper in the install targets") Suggested-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-5-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Benjamin Poirier [Wed, 31 Jan 2024 14:08:46 +0000 (09:08 -0500)]
selftests: net: Remove executable bits from library scripts
setup_loopback.sh and net_helper.sh are meant to be sourced from other
scripts, not executed directly. Therefore, remove the executable bits from
those files' permissions.
This change is similar to commit 49078c1b80b6 ("selftests: forwarding:
Remove executable bits from lib.sh")
Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Benjamin Poirier [Wed, 31 Jan 2024 14:08:45 +0000 (09:08 -0500)]
selftests: bonding: Check initial state
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.
Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.
I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:
tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp [ OK ]
Benjamin Poirier [Wed, 31 Jan 2024 14:08:44 +0000 (09:08 -0500)]
selftests: team: Add missing config options
Similar to commit dd2d40acdbb2 ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.
Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the
VMBus channel"), napi_disable was getting called for all channels,
including all subchannels without confirming if they are enabled or not.
This caused hv_netvsc getting hung at napi_disable, when netvsc_probe()
has finished running but nvdev->subchan_work has not started yet.
netvsc_subchan_work() -> rndis_set_subchannel() has not created the
sub-channels and because of that netvsc_sc_open() is not running.
netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which
netvsc_subchan_work did not run.
netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI
cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the
NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the
opposite.
Now during netvsc_device_remove(), when napi_disable is called for those
subchannels, napi_disable gets stuck on infinite msleep.
This fix addresses this problem by ensuring that napi_disable() is not
getting called for non-enabled NAPI struct.
But netif_napi_del() is still necessary for these non-enabled NAPI struct
for cleanup purpose.
Jan Beulich [Mon, 29 Jan 2024 13:03:08 +0000 (14:03 +0100)]
xen-netback: properly sync TX responses
Invoking the make_tx_response() / push_tx_responses() pair with no lock
held would be acceptable only if all such invocations happened from the
same context (NAPI instance or dealloc thread). Since this isn't the
case, and since the interface "spec" also doesn't demand that multicast
operations may only be performed with no in-flight transmits,
MCAST_{ADD,DEL} processing also needs to acquire the response lock
around the invocations.
To prevent similar mistakes going forward, "downgrade" the present
functions to private helpers of just the two remaining ones using them
directly, with no forward declarations anymore. This involves renaming
what so far was make_tx_response(), for the new function of that name
to serve the new (wrapper) purpose.
While there,
- constify the txp parameters,
- correct xenvif_idx_release()'s status parameter's type,
- rename {,_}make_tx_response()'s status parameters for consistency with
xenvif_idx_release()'s.
Fixes: 210c34dcd8d9 ("xen-netback: add support for multicast control") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jens Axboe [Thu, 1 Feb 2024 16:11:02 +0000 (09:11 -0700)]
Merge tag 'nvme-6.8-2024-02-01' of git://git.infradead.org/nvme into block-6.8
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.8
- Remove duplicated enums (Guixen)
- Use appropriate controller state accessors (Keith)
- Retryable authentication (Hannes)
- Add missing module descriptions (Chaitanya)
- Fibre-channel fixes for blktests (Daniel)
- Various type correctness updates (Caleb)
- Improve fabrics connection debugging prints (Nitin)
- Passthrough command verbose error logging (Adam)"
* tag 'nvme-6.8-2024-02-01' of git://git.infradead.org/nvme: (31 commits)
nvme: allow passthru cmd error logging
nvme-fc: show hostnqn when connecting to fc target
nvme-rdma: show hostnqn when connecting to rdma target
nvme-tcp: show hostnqn when connecting to tcp target
nvmet-fc: use RCU list iterator for assoc_list
nvmet-fc: take ref count on tgtport before delete assoc
nvmet-fc: avoid deadlock on delete association path
nvmet-fc: abort command when there is no binding
nvmet-fc: do not tack refs on tgtports from assoc
nvmet-fc: remove null hostport pointer check
nvmet-fc: hold reference on hostport match
nvmet-fc: free queue and assoc directly
nvmet-fc: defer cleanup using RCU properly
nvmet-fc: release reference on target port
nvmet-fcloop: swap the list_add_tail arguments
nvme-fc: do not wait in vain when unloading module
nvme-fc: log human-readable opcode on timeout
nvme: split out fabrics version of nvme_opcode_str()
nvme: take const cmd pointer in read-only helpers
nvme: remove redundant status mask
...
Alan Adamson [Tue, 30 Jan 2024 00:19:38 +0000 (16:19 -0800)]
nvme: allow passthru cmd error logging
Commit d7ac8dca938c ("nvme: quiet user passthrough command errors")
disabled error logging for user passthrough commands. This commit
adds the ability to opt-in to passthrough admin error logging. IO
commands initiated as passthrough will always be logged.
The logging output for passthrough commands (Admin and IO) has been
changed to include CDWXX fields.
nvme0n1: Read(0x2), LBA Out of Range (sct 0x0 / sc 0x80) DNR cdw10=0x0 cdw11=0x1
cdw12=0x70000 cdw13=0x0 cdw14=0x0 cdw15=0x0
Add a helper function nvme_log_err_passthru() which allows us to log
error for passthru commands by decoding cdw10-cdw15 values of nvme
command.
Add a new sysfs attr passthru_err_log_enabled that allows user to conditionally
enable passthrough command logging for either passthrough Admin commands sent to
the controller or passthrough IO commands sent to a namespace.
By default, passthrough error logging is disabled.
To enable passthrough admin error logging:
echo 1 > /sys/class/nvme/nvme0/passthru_err_log_enabled
To disable passthrough admin error logging:
echo 0 > /sys/class/nvme/nvme0/passthru_err_log_enabled
To enable passthrough io error logging:
echo 1 > /sys/class/nvme/nvme0/nvme0n1/passthru_err_log_enabled
To disable passthrough io error logging:
echo 0 > /sys/class/nvme/nvme0/nvme0n1/passthru_err_log_enabled
Signed-off-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Nitin U. Yewale [Mon, 29 Jan 2024 11:06:39 +0000 (16:36 +0530)]
nvme-fc: show hostnqn when connecting to fc target
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
Nitin U. Yewale [Mon, 29 Jan 2024 11:06:38 +0000 (16:36 +0530)]
nvme-rdma: show hostnqn when connecting to rdma target
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
Nitin U. Yewale [Mon, 29 Jan 2024 11:06:37 +0000 (16:36 +0530)]
nvme-tcp: show hostnqn when connecting to tcp target
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:10 +0000 (09:51 +0100)]
nvmet-fc: avoid deadlock on delete association path
When deleting an association the shutdown path is deadlocking because we
try to flush the nvmet_wq nested. Avoid this by deadlock by deferring
the put work into its own work item.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:09 +0000 (09:51 +0100)]
nvmet-fc: abort command when there is no binding
When the target port has not active port binding, there is no point in
trying to process the command as it has to fail anyway. Instead adding
checks to all commands abort the command early.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:08 +0000 (09:51 +0100)]
nvmet-fc: do not tack refs on tgtports from assoc
The association life time is tied to the life time of the target port.
That means we should not take extra a refcount when creating a
association.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:07 +0000 (09:51 +0100)]
nvmet-fc: remove null hostport pointer check
An association has always a valid hostport pointer. Remove useless
null pointer check.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:06 +0000 (09:51 +0100)]
nvmet-fc: hold reference on hostport match
The hostport data structure is shared between the association, this why
we keep track of the users via a refcount. So we should not decrement
the refcount on a match and free the hostport several times.
Reported by KASAN.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:05 +0000 (09:51 +0100)]
nvmet-fc: free queue and assoc directly
Neither struct nvmet_fc_tgt_queue nor struct nvmet_fc_tgt_assoc are data
structure which are used in a RCU context. So there is no reason to
delay the free operation.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:04 +0000 (09:51 +0100)]
nvmet-fc: defer cleanup using RCU properly
When the target executes a disconnect and the host triggers a reconnect
immediately, the reconnect command still finds an existing association.
The reconnect crashes later on because nvmet_fc_delete_target_assoc
blindly removes resources while the reconnect code wants to use it.
To address this, nvmet_fc_find_target_assoc should not be able to
lookup an association which is being removed. The association list
is already under RCU lifetime management, so let's properly use it
and remove the association from the list and wait for a grace period
before cleaning up all. This means we also can drop the RCU management
on the queues, because this is now handled via the association itself.
A second step split the execution context so that the initial disconnect
command can complete without running the reconnect code in the same
context. As usual, this is done by deferring the ->done to a workqueue.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:03 +0000 (09:51 +0100)]
nvmet-fc: release reference on target port
In case we return early out of __nvmet_fc_finish_ls_req() we still have
to release the reference on the target port.
Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:02 +0000 (09:51 +0100)]
nvmet-fcloop: swap the list_add_tail arguments
The first argument of list_add_tail function is the new element which
should be added to the list which is the second argument. Swap the
arguments to allow processing more than one element at a time.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Daniel Wagner [Wed, 31 Jan 2024 08:51:01 +0000 (09:51 +0100)]
nvme-fc: do not wait in vain when unloading module
The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.
There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.
If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.
While at it, remove the unused nvme_fc_wq workqueue too.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Alexander Tsoy [Thu, 1 Feb 2024 11:53:08 +0000 (14:53 +0300)]
ALSA: usb-audio: Ignore clock selector errors for single connection
For devices with multiple clock sources connected to a selector, we need
to check what a clock selector control request has returned. This is
needed to ensure that a requested clock source is indeed selected and for
autoclock feature to work.
For devices with single clock source connected, if we get an error there
is nothing else we can do about it. We can't skip clock selector setup as
it is required by some devices. So lets just ignore error in this case.
This should fix various buggy Mackie devices:
[ 649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[ 649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[ 649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
There is also interesting info from the Windows documentation [1] (this
is probably why manufacturers dont't even test this feature):
"The USB Audio 2.0 driver doesn't support clock selection. The driver
uses the Clock Source Entity, which is selected by default and never
issues a Clock Selector Control SET CUR request."
Geetha sowjanya [Tue, 30 Jan 2024 12:06:10 +0000 (17:36 +0530)]
octeontx2-pf: Remove xdp queues on program detach
XDP queues are created/destroyed when a XDP program
is attached/detached. In current driver xdp_queues are not
getting destroyed on program exit due to incorrect xdp_queue
and tot_tx_queue count values.
This patch fixes the issue by setting tot_tx_queue and xdp_queue
count to correct values. It also fixes xdp.data_hard_start address.
Jens Axboe [Thu, 1 Feb 2024 13:42:36 +0000 (06:42 -0700)]
io_uring/net: fix sr->len for IORING_OP_RECV with MSG_WAITALL and buffers
If we use IORING_OP_RECV with provided buffers and pass in '0' as the
length of the request, the length is retrieved from the selected buffer.
If MSG_WAITALL is also set and we get a short receive, then we may hit
the retry path which decrements sr->len and increments the buffer for
a retry. However, the length is still zero at this point, which means
that sr->len now becomes huge and import_ubuf() will cap it to
MAX_RW_COUNT and subsequently return -EFAULT for the range as a whole.
Fix this by always assigning sr->len once the buffer has been selected.
ALSA: hda: cs35l56: Remove unused test stub function
Remove an unused stub function that calls a non-existant function.
This function was accidentally added as part of commit 2144833e7b41 ("ALSA: hda: cirrus_scodec: Add KUnit test"). It was
a relic of an earlier version of the test that should have been
removed.
ALSA: hda: cs35l56: Firmware file must match the version of preloaded firmware
Check whether the firmware is already patched. If so, include the
firmware version in the firmware file name.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if either:
- FIRMWARE_MISSING == 0, or
- it is a secured CS35L56 (which implies that is was already patched),
cs35l56_hw_init() will set preloaded_fw_ver to the (non-zero)
firmware version if either of these conditions is true.
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
ALSA: hda: cs35l56: Fix filename string field layout
Change the filename field layout to:
cs35l56-rev[-s]-dsp1-misc[-sub].[wmfw|bin]
This is to keep the same firmware file naming scheme as the
CS35L56 ASoC driver.
This is not a compatibility break because no firmware files have
been published.
The original field layout matched the ASoC driver, but the way the
ASoC driver used the wm_adsp driver config to form this filename
was bugged. Fixing the ASoC driver to use the correct wm_adsp config
strings means that the 's' flag (to indicate a secured part) has to
move to somewhere after the first '-'.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Link: https://msgid.link/r/20240129162737.497-17-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA: hda: cs35l56: Fix order of searching for firmware files
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Link: https://msgid.link/r/20240129162737.497-16-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: cs35l56: Load tunings for the correct speaker models
If the "spk-id-gpios" property is present it points to GPIOs whose
value must be used to select the correct bin file to match the
speakers.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type of
speaker fitted is indicated by the values of one or more GPIOs. The
number formed by the GPIOs identifies the tuning required.
The speaker ID must be used in combination with the subsystem ID
(either from PCI SSID or cirrus,firmware-uid property), because the
GPIOs can only indicate variants of a specific model.
ASoC: cs35l56: Firmware file must match the version of preloaded firmware
Check during initialization whether the firmware is already patched.
If so, include the firmware version in the wm_adsp fwf_name string.
If the firmware has already been patched by the BIOS the driver
can only replace it if it has control of hard RESET.
If the driver cannot replace the firmware, it can still load a wmfw
(for ALSA control definitions) and/or a bin (for additional tunings).
But these must match the version of firmware that is running on the
CS35L56.
The firmware is pre-patched if FIRMWARE_MISSING == 0.
Including the firmware version in the fwf_name string will
qualify the firmware file name:
Normal (unpatched or replaceable firmware):
cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin]
Where:
[-s] is an optional -s added into the name for a secured CS35L56
VVVVVV is the 24-bit firmware version in hexadecimal.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 608f1b0dbdde ("ASoC: cs35l56: Move DSP part string generation so that it is done only once") Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revision
Put the silicon revision and secured flag in the wm_adsp fwf_name
string instead of including them in the part string.
This changes the format of the firmware name string from
cs35l56[s]-rev-misc[-system_name]
to
cs35l56-rev[-s]-misc[-system_name]
No firmware files have been published, so this doesn't cause a
compatibility break.
Silicon revision and secured flag are included in the firmware
filename to pick a firmware compatible with the part. These strings
were being added to the part string, but that is a misuse of the
string. The correct place for these is the fwf_name string, which
is specifically intended to select between multiple firmware files
for the same part.
Backport note:
This won't apply to kernels older than v6.6.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 608f1b0dbdde ("ASoC: cs35l56: Move DSP part string generation so that it is done only once") Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: cs35l56: Fix for initializing ASP1 mixer registers
Defer initializing the state of the ASP1 mixer registers until
the firmware has been downloaded and rebooted.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However, if it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link. Even if the ASP is used
as a firmware-firmware interconnect it is useful to have
ALSA controls for the ASP mixer. They are at least useful for
debugging.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP mixer registers. This means that we can't assume the default
state of these registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
DAPM normally reads the initial state of mux registers during
probe() but this would mean blocking probe() for several seconds
until the firmware has initialized them. To avoid this, the
mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read
the register state. Custom get/set callbacks are implemented for
ALSA control access, and these can safely block waiting for the
firmware download.
After the firmware download has completed, the state of the
mux registers is known so a work job is queued to call
snd_soc_dapm_mux_update_power() on each of the mux widgets.
Backport note:
This won't apply cleanly to kernels older than v6.6.
Add ASP1_FRAME_CONTROL1, ASP1_FRAME_CONTROL5 and the ASP1_TX?_INPUT
registers to the sequence used to initialize the ASP configuration.
Write this sequence to the cache and directly to the registers to
ensure that they match.
A system-specific firmware can patch these registers to values that are
not the silicon default, so that the CS35L56 boots already in the
configuration used by Windows or by "driverless" Windows setups such
as factory tuning.
These may not match how Linux is configuring the HDA codec. And anyway
on Linux the ALSA controls are used to configure routing options.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Link: https://msgid.link/r/20240129162737.497-10-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Patch the SDW TX mixer registers to silicon defaults.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So the
firmware sets up the SDW TX mixer registers to whatever audio
is relevant on a specific system.
This means that the driver cannot assume the initial values
of these registers. But Linux has ALSA controls to configure
routing, so the registers can be patched to silicon default and
the ALSA controls used to select what audio to feed back to the
host capture path.
Backport note:
This won't apply to kernels older than v6.6.
ASoC: cs35l56: Fix to ensure ASP1 registers match cache
Add a dummy SUPPLY widget connected to the ASP that forces the
chip registers to match the regmap cache when the ASP is
powered-up.
On a SoundWire system the ASP is free for use as a chip-to-chip
interconnect. This can be either for the firmware on multiple
CS35L56 to share reference audio; or as a bridge to another
device. If it is a firmware interconnect it is owned by the
firmware and the Linux driver should avoid writing the registers.
However. If it is a bridge then Linux may take over and handle
it as a normal codec-to-codec link.
CS35L56 is designed for SDCA and a generic SDCA driver would
know nothing about these chip-specific registers. So if the
ASP is being used on a SoundWire system the firmware sets up the
ASP registers. This means that we can't assume the default
state of the ASP registers. But we don't know the initial state
that the firmware set them to until after the firmware has been
downloaded and booted, which can take several seconds when
downloading multiple amps.
To avoid blocking probe() for several seconds waiting for the
firmware, the silicon defaults are assumed. This allows the machine
driver to setup the ASP configuration during probe() without being
blocked. If the ASP is hooked up and used, the SUPPLY widget
ensures that the chip registers match what was configured in the
regmap cache.
If the machine driver does not hook up the ASP, it is assumed that
it won't call any functions to configure the ASP DAI. Therefore
the regmap cache will be clean for these registers so a
regcache_sync() will not overwrite the chip registers. If the
DAI is not hooked up, the dummy SUPPLY widget will not be
invoked so it will never force-overwrite the chip registers.
Backport note:
This won't apply cleanly to kernels older than v6.6.
ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()
Remove the check of fw_patched from cs35l56_is_fw_reload_needed().
Also remove the redundant check for control of the reset GPIO.
The fw_patched flag is set when cs35l56_dsp_work() has completed its
steps to download firmware and power-up wm_adsp. There was a check in
cs35l56_is_fw_reload_needed() to make a quick exit of 'false' if
!fw_patched. The original idea was that the system might be suspended
before the driver has ever made any attempt to download firmware, and
in that case the driver doesn't need to return to a patched state
because it was never in a patched state.
This check of fw_patched is buggy because it prevented ever recovering
from a failed patch. If a previous attempt to patch and reboot the
silicon had failed it would leave fw_patched==false. This would mean
the driver never attempted another download even though the fault may
have been cleared (by a hard reset, for example).
It is also a redundant check because the calling code already makes
a quick exit if cs35l56_component_probe() has not been called, which
deals with the original intent of this check but in a safer way.
The check for reset GPIO is redundant: if the silicon was hard-reset
the FIRMWARE_MISSING flag will be 1. But this check created an
expectation that the suspend/resume code toggles reset. This can't
easily be protected against accidental code breakage. The only reason
for the check was to skip runtime-resuming the driver to read the
PROTECTION_STATUS register when it already knows it reset the silicon.
But in that case the driver will have to be runtime-resumed to do
the firmware download. So it created an assumption for no benefit.
ASoC: cs35l56: Don't add the same register patch multiple times
Move the call to cs35l56_set_patch() earlier in cs35l56_init() so
that it only adds the register patch on first-time initialization.
The call was after the post_soft_reset label, so every time this
function was run to re-initialize the hardware after a reset it would
call regmap_register_patch() and add the same reg_sequence again.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 898673b905b9 ("ASoC: cs35l56: Move shared data into a common data structure") Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->component
The cs35l56->component pointer is used by the suspend-resume handling to
know whether the driver is fully instantiated. This is to prevent it
queuing dsp_work which would result in calling wm_adsp when the driver
is not an instantiated ASoC component. So this pointer must be cleared
by cs35l56_component_remove().
ASoC: wm_adsp: Don't overwrite fwf_name with the default
There's no need to overwrite fwf_name with a kstrdup() of the cs_dsp part
name. It is trivial to select either fwf_name or cs_dsp.part as the string
to use when building the filename in wm_adsp_request_firmware_file().
This leaves fwf_name entirely owned by the codec driver.
It also avoids problems with freeing the pointer. With the original code
fwf_name was either a pointer owned by the codec driver, or a kstrdup()
created by wm_adsp. This meant wm_adsp must free it if it set it, but not
if the codec driver set it. The code was handling this by using
devm_kstrdup().
But there is no absolute requirement that wm_adsp_common_init() must be
called from probe(), so this was a pseudo-memory leak - each new call to
wm_adsp_common_init() would allocate another block of memory but these
would only be freed if the owning codec driver was removed.
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 0e7d82cbea8b ("ASoC: wm_adsp: Add support for loading bin files without wmfw") Link: https://msgid.link/r/20240129162737.497-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Thu, 1 Feb 2024 12:51:45 +0000 (13:51 +0100)]
Merge tag 'asoc-fix-v6.8-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
Quite a lot of fixes that came in since the merge window, a large
portion for for Qualcomm and ES8326.
The 8 DAI support for Qualcomm is just raising a constant to allow for
devies that otherwise only need DTs, and there's a few other device ID
updates for sunxi (Allwinner) and AMD platforms.
Jason Gunthorpe [Tue, 30 Jan 2024 16:14:54 +0000 (12:14 -0400)]
drm/tegra: Do not assume that a NULL domain means no DMA IOMMU
Previously with tegra-smmu, even with CONFIG_IOMMU_DMA, the default domain
could have been left as NULL. The NULL domain is specially recognized by
host1x_client_iommu_attach() as meaning it is not the DMA domain and
should be replaced with the special shared domain.
This happened prior to the below commit because tegra-smmu was using the
NULL domain to mean IDENTITY.
Now that the domain is properly labled the test in DRM doesn't see NULL.
Check for IDENTITY as well to enable the special domains.
Jason Gunthorpe [Tue, 30 Jan 2024 16:12:53 +0000 (12:12 -0400)]
iommu: Allow ops->default_domain to work when !CONFIG_IOMMU_DMA
The ops->default_domain flow used a 0 req_type to select the default
domain and this was enforced by iommu_group_alloc_default_domain().
When !CONFIG_IOMMU_DMA started forcing the old ARM32 drivers into IDENTITY
it also overroad the 0 req_type of the ops->default_domain drivers to
IDENTITY which ends up causing failures during device probe.
Make iommu_group_alloc_default_domain() accept a req_type that matches the
ops->default_domain and have iommu_group_alloc_default_domain() generate a
req_type that matches the default_domain.
This way the req_type always describes what kind of domain should be
attached and ops->default_domain overrides all other mechanisms to choose
the default domain.
Fixes: 2ad56efa80db ("powerpc/iommu: Setup a default domain and remove set_platform_dma_ops") Fixes: 0f6a90436a57 ("iommu: Do not use IOMMU_DOMAIN_DMA if CONFIG_IOMMU_DMA is not enabled") Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com> Closes: https://lore.kernel.org/linux-iommu/20240123165829.630276-1-ovidiu.panait@windriver.com/ Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Closes: https://lore.kernel.org/linux-iommu/170618452753.3805.4425669653666211728.stgit@ltcd48-lp2.aus.stglab.ibm.com/ Tested-by: Ovidiu Panait <ovidiu.panait@windriver.com> Tested-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v1-755bd21c4a64+525b8-iommu_def_dom_fix_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
firewire: core: search descriptor leaf just after vendor directory entry in root directory
It appears that Sony DVMC-DA1 has a quirk that the descriptor leaf entry
locates just after the vendor directory entry in root directory. This is
not conformant to the legacy layout of configuration ROM described in
Configuration ROM for AV/C Devices 1.0 (1394 Trading Association, Dec 2000,
TA Document 1999027).
This commit changes current implementation to parse configuration ROM for
device attributes so that the descriptor leaf entry can be detected for
the vendor name.
root directory
-----------------------------------------------------------------
1044 0006b681 directory_length 6, crc 46721
1048 03080046 vendor
1052 0c0083c0 node capabilities: per IEEE 1394
1056 8d00000a --> eui-64 leaf at 1096
1060 d1000003 --> unit directory at 1072
1064 c3000005 --> vendor directory at 1084
1068 8100000a --> descriptor leaf at 1108
unit directory at 1072
-----------------------------------------------------------------
1072 0002cdbf directory_length 2, crc 52671
1076 1200a02d specifier id
1080 13010000 version
vendor directory at 1084
-----------------------------------------------------------------
1084 00020cfe directory_length 2, crc 3326
1088 17fa0000 model
1092 81000008 --> descriptor leaf at 1124
projects / thirdparty / linux.git / log
