Adolf Belka [Wed, 20 Sep 2023 11:24:23 +0000 (13:24 +0200)]
tzdata: Update to version 2023c-1
- IPFire-3.x
- Update from verrsion 2022g-2 to 2023c-1
- Changelog
2023c
This release's code and data are identical to 2023a. In other words,
this release reverts all changes made in 2023b other than commentary, as
that appears to be the best of a bad set of short-notice choices for
modeling this week's daylight saving chaos in Lebanon. (Thanks to Rany
Hany for the heads-up about the government's announcement this week.)
2023b
The 2023b release of the tz code and data is available. It follows so
closely on the 2023a release because Lebanon's government announced that
Lebanon's spring-forward transition previously scheduled for the end of
this week has been delayed until April 20.
This release contains the following change:
Briefly:
Lebanon delays the start of DST this year.
Changes to future timestamps
This year Lebanon springs forward April 20/21 not March 25/26.
(Thanks to Saadallah Itani.)
2023a
Briefly:
Egypt now uses DST again, from April through October.
This year Morocco springs forward April 23, not April 30.
Palestine delays the start of DST this year.
Much of Greenland still uses DST from 2024 on.
America/Yellowknife now links to America/Edmonton.
tzselect can now use current time to help infer timezone.
The code now defaults to C99 or later.
Fix use of C23 attributes.
Changes to future timestamps
Starting in 2023, Egypt will observe DST from April's last Friday
through October's last Thursday. (Thanks to Ahmad ElDardiry.)
Assume the transition times are 00:00 and 24:00, respectively.
In 2023 Morocco's spring-forward transition after Ramadan
will occur April 23, not April 30. (Thanks to Milamber.)
Adjust predictions for future years accordingly. This affects
predictions for 2023, 2031, 2038, and later years.
This year Palestine will delay its spring forward from
March 25 to April 29 due to Ramadan. (Thanks to Heba Hamad.)
Make guesses for future Ramadans too.
Much of Greenland, represented by America/Nuuk, will continue to
observe DST using European Union rules. When combined with
Greenland's decision not to change the clocks in fall 2023,
America/Nuuk therefore changes from -03/-02 to -02/-01 effective
2023-10-29 at 01:00 UTC. (Thanks to Thomas M. Steenholdt.)
This change from 2022g doesn't affect timestamps until 2024-03-30,
and doesn't affect tm_isdst until 2023-03-25.
Changes to past timestamps
America/Yellowknife has changed from a Zone to a backward
compatibility Link, as it no longer differs from America/Edmonton
since 1970. (Thanks to Almaz Mingaleev.) This affects some
pre-1948 timestamps. The old data are now in 'backzone'.
Changes to past time zone abbreviations
When observing Moscow time, Europe/Kirov and Europe/Volgograd now
use the abbreviations MSK/MSD instead of numeric abbreviations,
for consistency with other timezones observing Moscow time.
Changes to code
You can now tell tzselect local time, to simplify later choices.
Select the 'time' option in its first prompt.
You can now compile with -DTZNAME_MAXIMUM=N to limit time zone
abbreviations to N bytes (default 255). The reference runtime
library now rejects POSIX-style TZ strings that contain longer
abbreviations, treating them as UTC. Previously the limit was
platform dependent and abbreviations were silently truncated to
16 bytes even when the limit was greater than 16.
The code by default is now designed for C99 or later. To build in
a C89 environment, compile with -DPORT_TO_C89. To support C89
callers of the tzcode library, compile with -DSUPPORT_C89. The
two new macros are transitional aids planned to be removed in a
future version, when C99 or later will be required.
The code now builds again on pre-C99 platforms, if you compile
with -DPORT_TO_C89. This fixes a bug introduced in 2022f.
On C23-compatible platforms tzcode no longer uses syntax like
'static [[noreturn]] void usage(void);'. Instead, it uses
'[[noreturn]] static void usage(void);' as strict C23 requires.
(Problem reported by Houge Langley.)
The code's functions now constrain their arguments with the C
'restrict' keyword consistently with their documentation.
This may allow future optimizations.
zdump again builds standalone with ckdadd and without setenv,
fixing a bug introduced in 2022g. (Problem reported by panic.)
leapseconds.awk can now process a leap seconds file that never
expires; this might be useful if leap seconds are discontinued.
Changes to commentary
tz-link.html has a new section "Coordinating with governments and
distributors". (Thanks to Neil Fuller for some of the text.)
To improve tzselect diagnostics, zone1970.tab's comments column is
now limited to countries that have multiple timezones.
Note that leap seconds are planned to be discontinued by 2035.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Wed, 20 Sep 2023 11:05:33 +0000 (13:05 +0200)]
usbutils: Update to version 015-1
- IPFire-3.x
- Update from version 014-4 to 105-1
- Changelog
015
usb-devices: list the root devices in numerical order
usb-devices: use 'local' variable type to handle recursion
lsusb: remove unused wireless check
lsusb: remove wireless descriptor information
usb-devices: fix field width on device speed field
lsusb: fix up Midi Device specification devices
Fix an runtime error reported by undefind sanitizer
lsusb: Improve status display for SuperSpeedPlus hubs
lsusb-t: Fix recursive sorting on child devices.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Wed, 20 Sep 2023 10:57:08 +0000 (12:57 +0200)]
util-linux: Update to version 2.39.2-1
- IPFire-3.x
- Update from version 2.38.1-3 to 2.39.2-1
- Changelogs for each version update are available at
https://mirrors.edge.kernel.org/pub/linux/utils/util-linux/v2.39/v2.39.2-ChangeLog
for version 2.39.2 and for earlier versions by modifying the url
Alternatively the github commits can be reviewed at
https://github.com/util-linux/util-linux/commits/v2.39.2
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Wed, 20 Sep 2023 10:38:41 +0000 (12:38 +0200)]
vala: Update to version 0.56.13-1
- IPFire-3.x
- Update from version 0.56.3-1.1 to 0.56.13-1
- Changelog
0.56.13
* Bindings:
- gtk4: Restore CssProvider.load_from_data() signature to take an array
[#1478]
0.56.12
* Regression fix:
- vala: Only transform default initializers of parameters [#1474]
* Bindings:
- gtk4: Preserve compatibility with <= 4.8.x [#1475]
0.56.11
* Various improvements and bug fixes:
- vala: Infer generic type from typeof() initializer of parameters
- girparser: Support glib:ref-func, glib:unref-func, copy-function
and free-function
* Bindings:
- gtk4: Update to 4.12.0
0.56.10
* Various improvements and bug fixes:
- codegen: Don't emit casts in static field initializers [#1459]
- parser: Reset tokens buffer when parsing a new source file
- vala: Output additional information when accessing unknown member
- vala: Allow "set" method of an container to return void or bool
- vala: Correctly handle possible null from SourceFile.get_source_line()
[#1464]
* Bindings:
- glib-2.0: Update return-type of HashTable.add/insert/replace() and
GenericSet.add() [#1465]
- linux: Add resolution field to Input.AbsInfo
- libpq: Fix a few binding errors
0.56.9
* Various improvements and bug fixes:
- codegen: Add missing EXTERN flag for GType function of error domains
[#1449]
- codegen: Improve handling of sealed classes [#1451]
- vala: Report an error when trying to chain up to inaccessible private
ctor [#1445]
- vala: Fix spaces for attributes when writing property accessors
- girwriter: Fix c:type attribute for real struct parameters [#1444]
- testrunner: Add support to check generated header
- manual: Update from wiki.gnome.org
* Bindings:
- gio-2.0: Ease implemention of GLib.ActionGroup [#1447]
- glib-2.0: Fix return-type of GLib.SourceOnceFunc [#1446]
- glib-2.0: Add ConvertError.{NO_MEMORY,EMBEDDED_NUL}
- gtk4: Pick up fix for Gdk.Toplevel.compute_size.size parameter
- vapi: Add documentation to GLib.Math that '-X -lm' may be needed when
compiling [#1388]
0.56.8
* Various improvements and bug fixes:
- codegen: Include "glib-object.h" when using GType/GBoxedCopyFunc
- valadoc: Backing method of lambda-expression isn't included in valadoc AST
- valadoc/tests: Add girwriter test
- build: Improve usage of AC_PATH_PROG() for valacs
- build: valadoc requires valac 0.18.1
* Bindings:
- gio-2.0: Add new symbols from 2.76
- glib-2.0: Add new symbols from 2.76
- glib-2.0: Fix binding of g_variant_type_n_items()
- gtk4: Don't skip AlertDialog ctor
0.56.7
* Various improvements and bug fixes:
- codegen:
+ Fix usage of lambda-expression from delegate initializer [#1428]
- vala:
+ Check type-argument count of interface prerequisites
+ Improve Symbol.to_string() to include TypeParameters
+ Improve error message for wrong number of type-arguments
+ Improve check of type_reference in ObjectCreationExpression
+ Allow inheritance from sealed class in bindings [#1036]
- Fix a couple of type-argument issues in vala itself
- g-i: Fix compiling with mingw clang
* Bindings:
- gio-2.0,glib-2.0,gtk+-3.0,gtk4: Fix a few binding issues
- glib-2.0: g_chdir is declared in <glib/gstdio.h>
0.56.6
* Regression fix:
- vala: Improve initialization of namespace fields with compound
literal [#1424]
* Bindings:
- gio-2.0,glib-2.0,gobject-2.0: Update 2.74 symbols
- webkit2gtk-4.*: Update to 2.40.0
- webkitgtk-6.0: Update to 2.40.0
0.56.5
* Various improvements and bug fixes:
- codegen:
+ Consistently handle GLib.Error as boxed type [#1418]
+ Add cast to accessor calls for generic property implementations
+ Use g_object_class_override_property to implement generic interface
properties [#1419]
+ Add declaration for register call of dynamic DBus interfaces [#1422]
- vala:
+ Correctly handle pre/post-increment expression as index of element
access [#1417]
+ Set proper value-type of unary ref/out expression in initializers [#1421]
+ Allow assignment of namespace fields with inline allocated arrays
- gtkmodule: Improve error messages
* Bindings:
- gtk4: Update to 4.10.1~40b154bf from 0.58
- gtk4: Add sealed to all the final types
- gtk+-3.0: Fix ToolPalette.icon_size get-accessor type
- webkitgtk-6.0: Update to 2.39.90
0.56.4
* Various improvements and bug fixes:
- codegen:
+ Add glib.h include for TRUE/FALSE literal
+ Append VALA_EXTERN also when using fast-vapi
+ Perform required casts for generic types of return-values and
in/out-parameters [#1407]
+ Correctly handle fixed-length array initialization of fields in classes
+ Perform required cast while assigning and passing function pointers [#1408]
+ Cast return value of generic type accessor functions [#1408]
+ Cast vfunc of property accessors by using cast_method_pointer() [#1408]
- vala:
+ Report error in real literal if exponent has no digits
+ Improve compatibility type checks of array elements in assignments
+ Improve missing exponent check for real literals
+ Better handling of [NoReturn] call inside finally clause
- Properly check for colored terminal output on Windows [#1383]
- Fix output decoding error of non-ASCII character on Win32 [#1379]
- parser: Properly handle chained equality expressions [#1385]
- manual: Update from wiki.gnome.org
* Bindings:
- cairo: Add missing Cairo.Pattern.get_rgba() [#1381]
- glib-2.0: Add `double_hash` and `double_equal`
- gtk4: Make Gtk.show_uri_full() an instance method of Gtk.Window [#1347]
- gtk4: Update workaround for DropTarget.drop() signal conflict [#1312]
- libgvc: Fix `cheader_filename` of the `Gvc` namespace
- pango: Fix a few binding errors
- pixman-1: Fix instance position of region copy methods
- webkit2gtk-*.*: Update to 2.37.91
- Add webkitgtk-6.0 bindings
- Update gnome-desktop-3.0 and gnome-desktop-4
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Wed, 20 Sep 2023 10:18:41 +0000 (12:18 +0200)]
vim: Update to version 9.0.1916-1
- IPFire-3.x
- Update from version 8.0.1184-3 to 9.0.1916-1
- Patches directory removed as the patch that was in there has now been included
into the vim tarball
- Changelog is the github commits at
https://github.com/vim/vim/commits/master
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Tue, 19 Sep 2023 13:01:30 +0000 (15:01 +0200)]
whois: Update to version 5.5.18
- IPFire-3.x
- Update from version 5.5.15 to 5.5.18
- Changelog
5.5.18
Updated the .ga TLD server. (Closes: #1037288)
Added new recovered IPv4 allocations.
Removed the delegation of 43.0.0.0/8 to JPNIC.
Removed 12 new gTLDs which are no longer active.
Improved the man page source, courtesy of Bjarni Ingi Gislason.
(Closes: #1040613)
Added the .edu.za SLD server.
Updated the .alt.za SLD server.
Added the -ru and -su NIC handles servers.
5.5.17
Added the .cd TLD server.
Updated the -kg NIC handles server name.
Removed 2 new gTLDs which are no longer active.
5.5.16
Add bash completion support, courtesy of Ville Skyttä.
Updated the .tr TLD server.
Removed support for -metu NIC handles.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
This is needed for the network stack.
The patch reverts https://github.com/systemd/systemd/commit/dd35a61
as systemd currently does not export sd-netlink.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Tue, 19 Sep 2023 12:46:26 +0000 (14:46 +0200)]
xxhash: Update to version 0.8.2
- IPFire-3.x
- Update from version 0.8.1 to 0.8.2
- Changelog major items. More details can be found at
https://github.com/Cyan4973/xxHash/releases/tag/v0.8.2
0.8.2
xxHash v0.8.2 is an incremental update featuring multiple small improvements
and fixes spread out over ~300 commits. Faster performance
Several updates by @easyaspi314 and @hzhuang1 impact arm platform, most
notably the neon code path. On the M1 Pro, this translates into +20% speed
for xxh3 and xxh128 (from 30.0 GB/s to 36 GB/s).
Some of the changes are generic, so other platforms can be affected too,
though typically to a lesser extend (~5%).
On wasm, speed fo xxh3 is improved by a large factor x2 to x3 (depending on
underlying hardware) through the use of simd128 (@easyaspi314). This is
especially efficient under the v8 js engine, notably used by chrome and
node.js.
Finally, @hzhuang1 added support for the arm's SVE vector extension. This
is useful for server-side aarch64 cpus with hardware support for wide
vectors, such as Fujitsu's A64FX.
Fixes and improvements
Notable fixes in this update include the resolution of issues with XXH3
S390x vector implementation, PowerPC vector compilation with IBM XL
compiler, and -Og compilation.
Furthermore, the command line interface (CLI) was refined with features
such as support for comment lines in check files and commands such as
--binary and --ignore-missing (@t-mat). Additionally, issues with filename
containing /LF character were resolved.
The build process was also refined, with improvements such as fixing
pkgconfig generation with cmake (@ilya-fedin), icc compilation, cmake
install directories, and new build options to reduce binary size
(@easyaspi314). Dedicated install targets were introduced (@ffontaine),
and support for DISPATCH mode in cmake was added (@hzhuang1).
In terms of portability, the update includes the SVE vector implementation
of XXH3, compatibility with freestanding environments using XXH_NO_STDLIB,
and the ability to build on Haiku. The code has also been validated on
m68k and risc-v.
Documentation
XXH3 finally has a written specification, thanks to @adrien1018 !
Source code can also be digested by doxygen to generate code documentation
automatically. An instance is now available at homepage.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Tue, 19 Sep 2023 12:06:41 +0000 (14:06 +0200)]
xz: Update to version 5.4.4
- IPFire-3.x
- Update from version 5.2.8 to 5.4.4
- Changelog is too large to include here. Details can be found at
https://github.com/tukaani-project/xz/releases
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Tue, 19 Sep 2023 11:53:42 +0000 (13:53 +0200)]
zlib: Update to version 1.3
- IPFire-3.x
- Update from version 1.2.13 to 1.3
- Changelog
1.3
Building using K&R (pre-ANSI) function definitions is no longer supported.
Fixed a bug in deflateBound() for level 0 and memLevel 9.
Fixed a bug when gzungetc() is used immediately after gzopen().
Fixed a bug when using gzflush() with a very small buffer.
Fixed a crash when gzsetparams() is attempted for a transparent write.
Fixed test/example.c to work with FORCE_STORED.
Fixed minizip to allow it to open an empty zip file.
Fixed reading disk number start on zip64 files in minizip.
Fixed a logic error in minizip argument processing.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Tue, 19 Sep 2023 11:42:17 +0000 (13:42 +0200)]
zstd: Update to version 1.5.5
- IPFire-s.x
- Update from version 1.5.2 to 1.5.5
- Changelog is too large to include here. See the following github page for the
details. https://github.com/facebook/zstd/releases
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 18 Sep 2023 14:16:54 +0000 (16:16 +0200)]
libxcrypt: Update to version 4.4.36
- IPFire3.x
- Update from version 4.4.33 to 4.4.36
- Changelog
Version 4.4.36
* Fix left over bits failing with Perl v5.38.0 (issue #173).
Version 4.4.35
* Fix build with Perl v5.38.0 (issue #170).
* Fix build with MinGW-w(32|64).
Version 4.4.34
* Update build-aux/m4/ax_valgrind_check.m4 to v23.
* Optimize some cast operation for performance in
lib/alg-yescrypt-platform.c.
* Add SHA-2 Maj() optimization proposed by Wei Dai in lib/alg-sha512.c.
* Explicitly clean the stack and context state after computation in
lib/alg-gost3411-2012-hmac.c, lib/alg-hmac-sha1.c, and lib/alg-sha256.c
(issue #168).
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 18 Sep 2023 14:16:56 +0000 (16:16 +0200)]
apr-util: Update version to 1.6.3 and add libxcrypt as dependency
- IPFire3.x
- Update version from 1.6.1 to 1.6.3
- libxcrypt dependency required for apache
- Changelog
1.6.3
*) Correct a packaging issue in 1.6.2. The contents of the release were
correct, but the top level directory was misnamed.
1.6.2
*) SECURITY: CVE-2022-25147 (cve.mitre.org)
Integer Overflow or Wraparound vulnerability in apr_base64 functions
of Apache Portable Runtime Utility (APR-util) allows an attacker to
write beyond bounds of a buffer.
*) Teach configure how to find and build against MariaDB 10.2. PR 61517
[Kris Karas <bugs-a17 moonlit-rail.com>]
*) apr_crypto_commoncrypto: Remove stray reference to -lcrypto that
prevented commoncrypto being enabled. [Graham Leggett]
*) Add --tag=CC to libtool invocations. PR 62640. [Michael Osipov]
*) apr_dbm_gdbm: Fix handling of error codes. This makes gdbm 1.14 work.
apr_dbm_gdbm will now also return error codes starting with
APR_OS_START_USEERR, as apr_dbm_berkleydb does, instead of always
returning APR_EGENERAL. [Stefan Fritsch]
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sun, 17 Sep 2023 14:29:32 +0000 (16:29 +0200)]
apr: Update to version 1.7.4
- IPFire3.x
- Update from version 1.7.2 to 1.7.4
- Changelog
1.7.4
*) Fix a regression where writing to a file opened with both APR_FOPEN_APPEND
and APR_FOPEN_BUFFERED did not properly append the data on Windows.
(This regression was introduced in APR 1.7.3) [Evgeny Kotkov]
1.7.3
*) apr-1-config: Fix crosscompiling detection in apr-1-config. PR 66510
[Ruediger Pluem]
*) configure: Add --enable-sysv-shm to use SysV shared memory (shmget) if
available. [Ruediger Pluem]
*) apr_socket_sendfile: Use WSAIoctl() to get TransmitFile function
pointer on Windows. [Ivan Zhakov]
*) apr_dir_read: Do not request short file names on Windows 7
and later. [Ivan Zhakov]
*) apr_file_gets: Optimize for buffered files on Windows.
[Evgeny Kotkov]
*) Fix a deadlock when writing to locked files opened with APR_FOPEN_APPEND
on Windows. PR 50058. [Evgeny Kotkov]
*) Don't seek to the end when opening files with APR_FOPEN_APPEND on Windows.
[Evgeny Kotkov]
*) apr_file_write: Optimize large writes to buffered files on Windows.
[Evgeny Kotkov]
*) apr_file_read: Optimize large reads from buffered files on Windows.
[Evgeny Kotkov]
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Peter Müller [Sun, 17 Sep 2023 20:18:20 +0000 (20:18 +0000)]
sudo: Fix incorrect location of libsudo_utils.so
Reported-by: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org> Signed-off-by: Peter Müller <peter.mueller@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Peter Müller [Mon, 18 Sep 2023 10:04:29 +0000 (10:04 +0000)]
OpenSSL: Add missing Perl dependency
Reported-by: Michael Tremer <michael.tremer@ipfire.org> Signed-off-by: Peter Müller <peter.mueller@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sun, 17 Sep 2023 13:42:04 +0000 (15:42 +0200)]
ppp: Update to version 2.5.0
- IPFire3.x
- Update from version 2.4.9 to 2.5.0
- Update based on the changes from ipfire2.x
- More work still needed once networking has been put in place.
define location of secrets and the IPFire3.x replacements for
the dialer, ip-up and ip_down helper scripts that were used in
IPFire2.x
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Sun, 17 Sep 2023 13:39:23 +0000 (13:39 +0000)]
ipfire-release: Install a lot of useful packages
This is a list of packages that should be installed on the core system.
If that is impossible for whatever reason, we won't break the
installation because of these.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
- IPFire3.x
- Update from version 340000 release 1.1 to 3430100 release 1
- Changelog is very large - see https://www.sqlite.org/chronology.html for
links for each release that show the changelog
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Peter Müller [Fri, 15 Sep 2023 13:51:56 +0000 (15:51 +0200)]
mtr: Update to 0.95
Also, this has moved to GitHub, and its code quality
apparently has improved sufficiently so we can drop
the workaround we used to carry around before.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Michael Tremer [Thu, 14 Sep 2023 13:02:35 +0000 (13:02 +0000)]
Mass rebuild for incorrectly packaged libtool archive files
Due to a pattern matching bug in Pakfire, those files have been
incorrectly packages instead of being deleted which results in build
errors when linking.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 13 Sep 2023 18:07:59 +0000 (18:07 +0000)]
perl: Fix that the package can be installed
Perl packages require "perl(strict)" which was accidentially dropped
from the manual provides list. Furthermore, perl(Test) is a common
package that is needed for building modules.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>