Junio C Hamano [Fri, 25 Feb 2011 23:43:25 +0000 (15:43 -0800)]
write_idx_file: introduce a struct to hold idx customization options
Remove two globals, pack_idx_default version and pack_idx_off32_limit,
and place them in a pack_idx_option structure. Allow callers to pass
it to write_idx_file() as a parameter.
Junio C Hamano [Wed, 2 Feb 2011 18:06:51 +0000 (10:06 -0800)]
index-pack: group the delta-base array entries also by type
Entries in the delta_base array are only grouped by the bytepattern in
the delta_base union, some of which have 20-byte object name of the base
object (i.e. base for REF_DELTA objects), while others have sizeof(off_t)
bytes followed by enough NULs to fill 20-byte. The loops to iterate
through a range inside this array still needs to inspect the type of the
delta, and skip over false hits.
Group the entries also by type to eliminate the potential of false hits.
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'mg/placeholders-are-lowercase'
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
Junio C Hamano [Mon, 28 Feb 2011 05:58:30 +0000 (21:58 -0800)]
Merge branch 'pw/p4'
* pw/p4:
git-p4: support clone --bare
git-p4: decode p4 wildcard characters
git-p4: better message for "git-p4 sync" when not cloned
git-p4: reinterpret confusing p4 message
git-p4: accommodate new move/delete type in p4
git-p4: add missing newline in initial import message
git-p4: fix key error for p4 problem
git-p4: test script
Junio C Hamano [Mon, 28 Feb 2011 05:58:29 +0000 (21:58 -0800)]
Merge branch 'uk/checkout-ambiguous-ref'
* uk/checkout-ambiguous-ref:
Rename t2019 with typo "amiguous" that meant "ambiguous"
checkout: rearrange update_refs_for_switch for clarity
checkout: introduce --detach synonym for "git checkout foo^{commit}"
checkout: split off a function to peel away branchname arg
checkout: fix bug with ambiguous refs
Junio C Hamano [Mon, 28 Feb 2011 05:17:37 +0000 (21:17 -0800)]
Merge branch 'hv/mingw-fs-funnies'
* hv/mingw-fs-funnies:
mingw_rmdir: set errno=ENOTEMPTY when appropriate
mingw: add fallback for rmdir in case directory is in use
mingw: make failures to unlink or move raise a question
mingw: work around irregular failures of unlink on windows
mingw: move unlink wrapper to mingw.c
Junio C Hamano [Mon, 28 Feb 2011 05:17:36 +0000 (21:17 -0800)]
Merge branch 'en/object-list-with-pathspec'
* en/object-list-with-pathspec:
Add testcases showing how pathspecs are handled with rev-list --objects
Make rev-list --objects work together with pathspecs
Junio C Hamano [Mon, 28 Feb 2011 05:17:36 +0000 (21:17 -0800)]
Merge branch 'nd/struct-pathspec'
* nd/struct-pathspec: (22 commits)
t6004: add pathspec globbing test for log family
t7810: overlapping pathspecs and depth limit
grep: drop pathspec_matches() in favor of tree_entry_interesting()
grep: use writable strbuf from caller for grep_tree()
grep: use match_pathspec_depth() for cache/worktree grepping
grep: convert to use struct pathspec
Convert ce_path_match() to use match_pathspec_depth()
Convert ce_path_match() to use struct pathspec
struct rev_info: convert prune_data to struct pathspec
pathspec: add match_pathspec_depth()
tree_entry_interesting(): optimize wildcard matching when base is matched
tree_entry_interesting(): support wildcard matching
tree_entry_interesting(): fix depth limit with overlapping pathspecs
tree_entry_interesting(): support depth limit
tree_entry_interesting(): refactor into separate smaller functions
diff-tree: convert base+baselen to writable strbuf
glossary: define pathspec
Move tree_entry_interesting() to tree-walk.c and export it
tree_entry_interesting(): remove dependency on struct diff_options
Convert struct diff_options to use struct pathspec
...
Jakub Narebski [Sun, 27 Feb 2011 16:58:32 +0000 (17:58 +0100)]
gitweb: Make i18n (encoding) tests in t9500 leave clean state
The most important issue is that after unsetting `i18n.commitencoding'
config variable t9500 no longer will use author and comitter name
containing ISO-8859-1 characters, which are invalid UTF-8 characters.
Besides it is good practice in general to clean up the state in tests.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Libor Pechacek [Sun, 30 Jan 2011 19:40:41 +0000 (20:40 +0100)]
Sanity-check config variable names
Sanity-check config variable names when adding and retrieving them. As a side
effect code duplication between git_config_set_multivar and get_value (in
builtin/config.c) was removed and the common functionality was placed in
git_config_parse_key.
This breaks a test in t1300 which used invalid section-less keys in the tests
for "git -c". However, allowing such names there was useless, since there was
no way to set them via config file, and no part of git actually tried to use
section-less keys. This patch updates the test to use more realistic examples
as well as adding its own test.
Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 22 Feb 2011 01:20:11 +0000 (17:20 -0800)]
Merge branch 'maint'
* maint:
t/t7500-commit.sh: use test_cmp instead of test
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
gitweb/gitweb.perl: don't call S_ISREG() with undef
gitweb/gitweb.perl: remove use of qw(...) as parentheses
Vitor Antunes [Sun, 20 Feb 2011 01:18:25 +0000 (01:18 +0000)]
git-p4: Add copy detection support
Add new config options:
git-p4.detectCopies - Enable copy detection.
git-p4.detectCopiesHarder - Find copies harder.
The detectCopies option should be set to a true/false value.
The detectCopiesHarder option should be set to true/false value.
P4Submit can now process diff-tree C status and integrate files accordingly.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Acked-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Vitor Antunes [Sun, 20 Feb 2011 01:18:24 +0000 (01:18 +0000)]
git-p4: Improve rename detection support
Only open files for edit after integrating if the SHA1 of source and destination
differ from each other.
Add git config option detectRenames to allow permanent rename detection. This
options should be set to a true/false value.
Rename "detectRename" variable to "detectRenames" to make it more coherent with
the description in git man pages, which always use plural.
Signed-off-by: Vitor Antunes <vitor.hda@gmail.com> Acked-by: Pete Wyckoff <pw@padd.com> Acked-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change commit_msg_is() in t/t7500-commit.sh to use test_cmp instead of
the shell's test function. Now if a test fails we'll get test_cmp
output showing us what failed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/gitweb-lib.sh: Ensure that errors are shown for --debug --immediate
Because '--immediate' stops test suite after first error, therefore in
this mode
test_debug 'cat gitweb.log'
was never ran, thus in effect negating effect of '--debug' option.
This made finidng the cause of errors in gitweb test sute difficult.
Modify the gitweb_run test subroutine to run test_debug itself in the
case of errors (and also remove "test_debug 'cat gitweb.log'" from
gitweb tests).
This makes it possible to run *gitweb tests* with --immediate ---debug
combination of options; also it makes gitweb tests to not output
spurious debug data that is not considered error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb/gitweb.perl: don't call S_ISREG() with undef
Change S_ISREG($to_mode_oct) to S_ISREG($from_mode_oct) in the branch
that handles from modes, not to modes. This logic appears to have been
caused by copy/paste programming by Jakub Narebski in e8e41a93. It
would be better to rewrite this code not to be duplicated, but I
haven't done so.
This issue caused a failing test on perl 5.13.9, which has a warning
that turned this up:
gitweb.perl: Use of uninitialized value in subroutine entry at /home/avar/g/git/t/../gitweb/gitweb.perl line 4415.
Which caused the Git test suite to fail on this test:
gitweb/gitweb.perl: remove use of qw(...) as parentheses
Using the qw(...) construct as implicit parentheses was deprecated in
perl 5.13.5. Change the relevant code in gitweb to not use the
deprecated construct. The offending code was introduced in 3562198b by
Jakub Narebski.
The issue is that perl will now warn about this:
$ perl -wE 'for my $i qw(a b) { say $i }'
Use of qw(...) as parentheses is deprecated at -e line 1.
a
b
This caused gitweb.perl to warn on perl 5.13.5 and above, and these
tests to fail on those perl versions:
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pete Wyckoff [Sat, 19 Feb 2011 13:18:00 +0000 (08:18 -0500)]
git-p4: decode p4 wildcard characters
There are four wildcard characters in p4. Files with these
characters can be added to p4 repos using the "-f" option.
They are stored in %xx notation, and when checked out, p4
converts them back to normal.
This patch does the same thing when importing into git,
converting the four special characters. Without this change,
the files appear with literal %xx in their names.
Be careful not to produce "*" in filenames on windows. That
will fail.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pete Wyckoff [Sat, 19 Feb 2011 13:17:59 +0000 (08:17 -0500)]
git-p4: better message for "git-p4 sync" when not cloned
A common error is to do "git-p4 sync" in a repository that
was not initialized by "git-p4 clone". There will be no
p4 refs. The error message in this case is a traceback
for an assertion, which is confusing.
Change it instead to explain the likely problem.
Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-By: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pete Wyckoff [Sat, 19 Feb 2011 13:17:58 +0000 (08:17 -0500)]
git-p4: reinterpret confusing p4 message
Error output will look like this:
glom$ git p4 clone //deopt
Importing from //deopt into .
Reinitialized existing Git repository in /tmp/x/.git/
Doing initial import of //deopt from revision #head into refs/remotes/p4/master
p4 returned an error: //deopt/... - must refer to client glom.
This particular p4 error is misleading.
Perhaps the depot path was misspelled.
Depot path: //deopt
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pete Wyckoff [Sat, 19 Feb 2011 13:17:57 +0000 (08:17 -0500)]
git-p4: accommodate new move/delete type in p4
562d53f (git-p4: Fix sync errors due to new server version, 2010-01-21)
taught git-p4 sync to recognize the new move/delete type, but this type
can also show up in an initial clone and labels output.
Instead of replicating the support in three places, hoist the definition
somewhere global.
Signed-off-by: Pete Wyckoff <pw@padd.com> Acked-By: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pete Wyckoff [Sat, 19 Feb 2011 13:17:55 +0000 (08:17 -0500)]
git-p4: fix key error for p4 problem
Some p4 failures result in an error, but the info['code'] is not
set. These include a bad p4 executable, or a core dump from p4,
and other odd internal errors where p4 fails to generate proper
marshaled output.
Make sure the info key exists before using it to avoid a python
traceback.
Signed-off-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michael J Gruber [Thu, 17 Feb 2011 07:48:06 +0000 (08:48 +0100)]
Make <identifier> lowercase in Documentation
Leaving uppercase abbreviations (e.g. URL) and an identifier named after
an upercase env variable (CVSROOT) in place, this adjusts the few
remaining cases and fixes an unidentified identifier along the way.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since bb0a484 (mergetool: Skip autoresolved paths, 2010-08-17),
mergetool uses different ways of figuring out the list of files with
merge conflicts depending on whether rerere is active. If rerere is
active, mergetool will use 'git rerere status' to list the files with
remaining conflicts. However, the output from that command does not
list conflicts of types that rerere does not handle, such as
modify/remove conflicts.
Another problem with solely relying on the output from 'git rerere
status' is that, for new conflicts that are not yet known to rerere,
the output from the command will list the files even after adding them
to the index. This means that if the conflicts in some files have been
resolved and 'git mergetool' is run again, it will ask the user
something like the following for each of those files.
file1: file does not need merging
Continue merging other unresolved paths (y/n) ?
Solve both of these problems by replacing the call to 'git rerere
status' with a call to the new 'git rerere remaining' that was
introduced in the previous commit.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After "rerere" resolves conflicts by reusing old resolution, there would
be three kinds of paths with conflict in the index:
* paths that have been resolved in the working tree by rerere;
* paths that need further work whose resolution could be recorded;
* paths that need resolving that rerere won't help.
When the user wants a list of paths that need hand-resolving, output from
"rerere status" does not help, as it shows only the second category, but
the paths in the third category still needs work (rerere only makes sense
for regular files that have both our side and their side, and does not
help other kinds of conflicts, e.g. "we modified, they deleted").
The new subcommand "rerere remaining" can be used to show both. As
opposed to "rerere status", this subcommand also skips printing paths
that have been added to the index, since these paths are already
resolved and are no longer "remaining".
Initial patch provided by Junio. Refactored and modified to skip
resolved paths by Martin. Commit message mostly by Junio.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johan Herland [Wed, 16 Feb 2011 00:54:24 +0000 (01:54 +0100)]
push.default: Rename 'tracking' to 'upstream'
Users are sometimes confused with two different types of "tracking" behavior
in Git: "remote-tracking" branches (e.g. refs/remotes/*/*) versus the
merge/rebase relationship between a local branch and its @{upstream}
(controlled by branch.foo.remote and branch.foo.merge config settings).
When the push.default is set to 'tracking', it specifies that a branch should
be pushed to its @{upstream} branch. In other words, setting push.default to
'tracking' applies only to the latter of the above two types of "tracking"
behavior.
In order to make this more understandable to the user, we rename the
push.default == 'tracking' option to push.default == 'upstream'.
push.default == 'tracking' is left as a deprecated synonym for 'upstream'.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jay Soffian [Tue, 15 Feb 2011 01:07:50 +0000 (20:07 -0500)]
merge: honor prepare-commit-msg hook
When a merge is stopped due to conflicts or --no-commit, the
subsequent commit calls the prepare-commit-msg hook. However,
it is not called after a clean merge. Fix this inconsistency
by invoking the hook after clean merges as well.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shawn O. Pearce [Tue, 15 Feb 2011 16:57:24 +0000 (08:57 -0800)]
smart-http: Don't use Expect: 100-Continue
Some HTTP/1.1 servers or proxies don't correctly implement the
100-Continue feature of HTTP/1.1. Its a difficult feature to
implement right, and isn't commonly used by browsers, so many
developers may not even be aware that their server (or proxy)
doesn't honor it.
Within the smart HTTP protocol for Git we only use this newer
"Expect: 100-Continue" feature to probe for missing authentication
before uploading a large payload like a pack file during push.
If authentication is necessary, we expect the server to send the
401 Not Authorized response before the bulk data transfer starts,
thus saving the client bandwidth during the retry.
A different method to probe for working authentication is to send an
empty command list (that is just "0000") to $URL/git-receive-pack.
or $URL/git-upload-pack. All versions of both receive-pack and
upload-pack since the introduction of smart HTTP in Git 1.6.6
cleanly accept just a flush-pkt under --stateless-rpc mode, and
exit with success.
If HTTP level authentication is successful, the backend will return
an empty response, but with HTTP status code 200. This enables
the client to continue with the transfer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 15 Feb 2011 19:03:22 +0000 (11:03 -0800)]
Merge branch 'maint'
* maint:
pull: do not display fetch usage on --help-all
git-tag.txt: list all modes in the description
commit,status: describe -u likewise
add: describe --patch like checkout, reset
commit,merge,tag: describe -m likewise
clone,init: describe --template using the same wording
commit,status: describe --porcelain just like push
commit,tag: use same wording for -F
configure: use AC_LANG_PROGRAM consistently
string_list_append: always set util pointer to NULL
correct type of EMPTY_TREE_SHA1_BIN
Michael J Gruber [Tue, 15 Feb 2011 13:09:07 +0000 (14:09 +0100)]
commit,merge,tag: describe -m likewise
This also removes the superfluous "specify" and rewords the misleading
"if any" which sounds as if omitting "-m" would omit the merge commit
message. (It means "if a merge commit is created at all".)
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Masatake Osanai [Mon, 14 Feb 2011 22:13:04 +0000 (07:13 +0900)]
perl: command_bidi_pipe() method should set-up git environmens
When command_input_pipe and command_output_pipe are used as a
method of a Git::repository instance, they eventually call into
_cmd_exec method that sets up the execution environment such as
GIT_DIR, GIT_WORK_TREE environment variables and the current
working directory in the child process that interacts with the
repository.
command_bidi_pipe however didn't expect to be called as such, and
lacked all these set-up. Because of this, a program that did this
did not work as expected:
my $repo = Git->repository(Directory => '/some/where/else');
my ($pid, $in, $out, $ctx) =
$repo->command_bidi_pipe(qw(hash-object -w --stdin-paths));
This patch refactors the _cmd_exec into _setup_git_cmd_env that
sets up the execution environment, and makes _cmd_exec and
command_bidi_pipe to use it.
Note that unlike _cmd_exec that execv's a git command as an
external process, command_bidi_pipe is called from the main line
of control, and the execution environment needs to be restored
after open2() does its magic.
Signed-off-by: Masatake Osanai <unpush@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ralf Wildenhues [Sun, 2 Jan 2011 10:24:55 +0000 (11:24 +0100)]
configure: use AC_LANG_PROGRAM consistently
Avoid warnings from Autoconf 2.68 about missing use of AC_LANG_PROGRAM
and friends.
Quoting autoconf-2.68/NEWS:
** The macros AC_PREPROC_IFELSE, AC_COMPILE_IFELSE, AC_LINK_IFELSE, and
AC_RUN_IFELSE now warn if the first argument failed to use
AC_LANG_SOURCE or AC_LANG_PROGRAM to generate the conftest file
contents. A new macro AC_LANG_DEFINES_PROVIDED exists if you have
a compelling reason why you cannot use AC_LANG_SOURCE but must
avoid the warning.
The underlying reason for that change is that AC_LANG_{SOURCE,PROGRAM}
take care to supply the previously computed set of #defines (and
include standard headers if so desired) for preprocessed languages
like C and C++.
In some cases, AC_LANG_PROGRAM is already used but not sufficiently
m4-quoted, so we just need to add another set of [quotes] to prevent
the autoconf warning from being triggered bogusly. Quoting all
arguments (except when calling special macros that need to be expanded
before recursion) is better style, anyway. These and more rules are
described in detail in 'info Autoconf "Programming in M4"'.
No change in the resulting config.mak.autogen after running
./configure intended.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 12 Feb 2011 05:18:51 +0000 (00:18 -0500)]
string_list_append: always set util pointer to NULL
It is not immediately obvious that the util field may
contain random bytes after appending an item. Especially
since the string_list_insert* functions _do_ explicitly zero
the util pointer.
This does not appear to be a bug in any current git code, as
all callers either fill in the util field immediately or
never use it. However, it is worth it to be less surprising
to new users of the string-list API who may expect it to be
intialized to NULL.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Mon, 7 Feb 2011 08:17:27 +0000 (02:17 -0600)]
correct type of EMPTY_TREE_SHA1_BIN
Functions such as hashcmp that expect a binary SHA-1 value take
parameters of type "unsigned char *" to avoid accepting a textual
SHA-1 passed by mistake. Unfortunately, this means passing the string
literal EMPTY_TREE_SHA1_BIN requires an ugly cast. Tweak the
definition of EMPTY_TREE_SHA1_BIN to produce a value of more
convenient type.
will result in a directory layout in the git tree of
branch/
branch/foo
branch/bar
p4 can do various other reordering that this change doesn't support,
but we should detect it and at least fail nicely.
Signed-off-by: Ian Wienand <ianw@vmware.com> Acked-by: Pete Wyckoff <pw@padd.com> Acked-by: Tor Arvid Lund <torarvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the .gitignore to ignore test-mktemp which is built from
test-mktemp.c. Arnout Engelen added this in 6cf6bb3 (Improve error
messages when temporary file creation fails, 2010-12-18) but forgot
to add a corresponding entry to .gitignore.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 12 Feb 2011 13:24:10 +0000 (14:24 +0100)]
repo-config: add deprecation warning
repo-config was deprecated in 5c66d0d4 on 2008-01-17. Warn the
remaining users that it has been replaced by config and is going to
be removed eventually.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Chris Packham [Thu, 10 Feb 2011 22:59:31 +0000 (11:59 +1300)]
clone: fixup recurse_submodules option
The recurse_submodules option was added in ccdd3da6 to bring 'git clone'
into line with 'git fetch' and future commands. The correct option should
have been "recurse-submodules".
Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Fri, 11 Feb 2011 10:36:44 +0000 (04:36 -0600)]
svn-fe: warn about experimental status
svn-fe is young and some coming cleanups might involve backward
incompatible UI changes. Add some words of warning to the manual so
early adopters that are not following the project closely don't get
burned.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Mon, 11 Oct 2010 02:59:26 +0000 (21:59 -0500)]
compat: helper for detecting unsigned overflow
The idiom (a + b < a) works fine for detecting that an unsigned
integer has overflowed, but a more explicit
unsigned_add_overflows(a, b)
might be easier to read.
Define such a macro, expanding roughly to ((a) < UINT_MAX - (b)).
Because the expansion uses each argument only once outside of sizeof()
expressions, it is safe to use with arguments that have side effects.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
