Nicolas Pitre [Fri, 15 Dec 2006 04:15:44 +0000 (23:15 -0500)]
make commit message a little more consistent and conforting
It is nicer to let the user know when a commit succeeded all the time,
not only the first time. Also the commit sha1 is much more useful than
the tree sha1 in this case.
This patch also introduces a -q switch to supress this message as well
as the summary of created/deleted files.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Thu, 14 Dec 2006 11:15:57 +0000 (06:15 -0500)]
Avoid accessing a slow working copy during diffcore operations.
The Cygwin folks have done a fine job at creating a POSIX layer
on Windows That Just Works(tm). However it comes with a penalty;
accessing files in the working tree by way of stat/open/mmap can
be slower for diffcore than inflating the data from a blob which
is stored in a packfile.
This performance problem is especially an issue in merge-recursive
when dealing with nearly 7000 added files, as we are loading
each file's content from the working directory to perform rename
detection. I have literally seen (and sadly watched) paint dry in
less time than it takes for merge-recursive to finish such a merge.
On the other hand this very same merge runs very fast on Solaris.
If Git is compiled with NO_FAST_WORKING_DIRECTORY set then we will
avoid looking at the working directory when the blob in question
is available within a packfile and the caller doesn't need the data
unpacked into a temporary file.
We don't use loose objects as they have the same open/mmap/close
costs as the working directory file access, but have the additional
CPU overhead of needing to inflate the content before use. So it
is still faster to use the working tree file over the loose object.
If the caller needs the file data unpacked into a temporary file
its likely because they are going to call an external diff program,
passing the file as a parameter. In this case reusing the working
tree file will be faster as we don't need to inflate the data and
write it out to a temporary file.
The NO_FAST_WORKING_DIRECTORY feature is enabled by default on
Cygwin, as that is the platform which currently appears to benefit
the most from this option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 14 Dec 2006 09:19:19 +0000 (01:19 -0800)]
git-reset [--mixed] <tree> [--] <paths>...
Sometimes it is asked on the list how to revert selected path in
the index from a tree, most often HEAD, without affecting the
files in the working tree. A similar operation that also
affects the working tree files has been available in the form of
"git checkout <tree> -- <paths>...".
By definition --soft would never affect either the index nor the
working tree files, and --hard is the way to make the working
tree files as close to pristine, so this new option is available
only for the default --mixed case.
Shawn O. Pearce [Thu, 14 Dec 2006 10:07:46 +0000 (05:07 -0500)]
Bypass expensive content comparsion during rename detection.
When comparing file contents during the second loop through a rename
detection attempt we can skip the expensive byte-by-byte comparsion
if both source and destination files have valid SHA1 values. This
improves performance by avoiding either an expensive open/mmap to
read the working tree copy, or an expensive inflate of a blob object.
Unfortunately we still have to at least initialize the sizes of the
source and destination files even if the SHA1 values don't match.
Failing to initialize the sizes causes a number of test cases to fail
and start reporting different copy/rename behavior than was expected.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Thu, 14 Dec 2006 08:03:18 +0000 (00:03 -0800)]
Update git-diff documentation
Porcelain documentation should talk in terms of end-user workflow, not
in terms of implementation details. Do not suggest update-index, but
git-add instead. Explain differences among 0-, 1- and 2-tree cases
not as differences of number of trees given to the command, but say
why user would want to give these number of trees to the command in
what situation.
Junio C Hamano [Wed, 13 Dec 2006 19:10:24 +0000 (11:10 -0800)]
Merge branch 'jc/read-tree-ignore'
* jc/read-tree-ignore:
read-tree: document --exclude-per-directory
Loosen "working file will be lost" check in Porcelain-ish
read-tree: further loosen "working file will be lost" check.
Junio C Hamano [Wed, 13 Dec 2006 19:08:20 +0000 (11:08 -0800)]
Merge branch 'np/addcommit'
* np/addcommit:
git-commit: allow --only to lose what was staged earlier.
Documentation/git-commit: rewrite to make it more end-user friendly.
make 'git add' a first class user friendly interface to the index
Junio C Hamano [Wed, 13 Dec 2006 19:07:51 +0000 (11:07 -0800)]
Merge branch 'lh/branch-rename'
* lh/branch-rename:
git-branch: let caller specify logmsg
rename_ref: use lstat(2) when testing for symlink
git-branch: add options and tests for branch renaming
Junio C Hamano [Wed, 13 Dec 2006 18:55:21 +0000 (10:55 -0800)]
branch --color: change default color selection.
Showing local and remote branches in green and red was simply
overkill, as all we wanted was to make it easy to tell them
apart (local ones can be built on top by committing, but the
remote tracking ones can't).
Use plain coloring for local branches and paint remotes in red.
Junio C Hamano [Wed, 13 Dec 2006 18:46:23 +0000 (10:46 -0800)]
Merge branch 'js/merge'
* js/merge:
merge-recursive: add/add really is modify/modify with an empty base
Get rid of the dependency on RCS' merge program
merge-file: support -p and -q; fix compile warnings
Add builtin merge-file, a minimal replacement for RCS merge
xdl_merge(): fix and simplify conflict handling
xdl_merge(): fix thinko
xdl_merge(): fix an off-by-one bug
merge-recursive: use xdl_merge().
xmerge: make return value from xdl_merge() more usable.
xdiff: add xdl_merge()
Junio C Hamano [Wed, 13 Dec 2006 18:30:11 +0000 (10:30 -0800)]
send-pack: tighten checks for remote names
"git push $URL HEAD~6" created a bogus ref HEAD~6 immediately
under $GIT_DIR of the remote repository. While we should keep
refspecs that have arbitrary extended SHA-1 expression on the
source side working (e.g. "HEAD~6:refs/tags/yesterday"), we
should not create bogus ref on the other end.
Junio C Hamano [Wed, 13 Dec 2006 18:03:39 +0000 (10:03 -0800)]
git-push: accept tag <tag> as advertised.
The documentation talked about "git push $URL tag <tag>" as a short-hand
for refs/tags/<tag>:refs/tags/<tag> for a long time but that was never
the case (the short-hand was for "git fetch"). Instead of fixing the
documentation, just add a bit of code to match it since it is easy to do
and would make it more consistent.
Junio C Hamano [Wed, 13 Dec 2006 08:58:28 +0000 (00:58 -0800)]
spurious .sp in manpages
This is just a random hack to work around problems people seem
to be seeing in manpage backend of xmlto (it appears we are
getting ".sp" at the end of line without line break).
Junio C Hamano [Wed, 13 Dec 2006 17:32:40 +0000 (09:32 -0800)]
git merge: reword failure message.
99.9999% of the time, the command is used with a single
strategy; after a merge failure, saying "No strategy handled the
merge" is technically correct, but there is no point stressing
we tried and failed all the possibilities the user has given.
Shawn Pearce [Wed, 13 Dec 2006 10:42:44 +0000 (05:42 -0500)]
Remove uncontested renamed files during merge.
Prior to 65ac6e9c3f47807cb603af07a6a9e1a43bc119ae we deleted a file
from the working directory during a merge if the file existed before
the merge started but was renamed by the branch being merged in.
This broke in 65ac6e as git-merge-recursive did not actually update
the working directory on an uncontested rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Although --cached and --index are confusing wording, the use of
word --cached for git-diff is consistent with git-apply. It means
"work with index without looking at the working tree".
We should probably come up with better wording for --cached, if
somebody wants to deprecate it. But making --index and --cached
synonyms for diff while leaving them mean different things for
apply is no good.
Eric Wong [Sat, 25 Nov 2006 06:38:18 +0000 (22:38 -0800)]
git-svn: exit with status 1 for test failures
Some versions of the SVN libraries cause die() to exit with 255,
and 40cf043389ef4cdf3e56e7c4268d6f302e387fa0 tightened up
test_expect_failure to reject return values >128.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Wed, 13 Dec 2006 09:13:28 +0000 (09:13 +0000)]
Allow subcommand.color and color.subcommand color configuration
While adding colour to the branch command it was pointed out that a
config option like "branch.color" conflicts with the pre-existing
"branch.something" namespace used for specifying default merge urls and
branches. The suggested solution was to flip the order of the
components to "color.branch", which I did for colourising branch.
This patch does the same thing for
- git-log (color.diff)
- git-status (color.status)
- git-diff (color.diff)
- pager (color.pager)
I haven't removed the old config options; but they should probably be
deprecated and eventually removed to prevent future namespace
collisions. I've done this deprecation by changing the documentation
for the config file to match the new names; and adding the "color.XXX"
options to contrib/completion/git-completion.bash.
Unfortunately git-svn reads "diff.color" and "pager.color"; which I
don't like to change unilaterally.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 13 Dec 2006 05:52:19 +0000 (21:52 -0800)]
Merge branch 'master' into js/merge
* master: (42 commits)
git-svn: correctly handle packed-refs in refs/remotes/
add test case for recursive merge
git-svn: correctly display fatal() error messages
git-svn: allow dcommit to take an alternate head
git-svn: enable logging of information not supported by git
Clarify fetch error for missing objects.
Move Fink and Ports check to after config file
shortlog: fix segfault on empty authorname
shortlog: remove "[PATCH]" prefix from shortlog output
Make sure the empty tree exists when needed in merge-recursive.
Don't use memcpy when source and dest. buffers may overlap
no need to install manpages as executable
Documentation: simpler shared repository creation
shortlog: fix segfault on empty authorname
Add branch.*.merge warning and documentation update
Fix perl/ build.
git-svn: use do_switch for --follow-parent if the SVN library supports it
Fix documentation copy&paste typo
git-svn: extra error check to ensure we open a file correctly
Documentation: update git-clone man page with new behavior
...
Eric Wong [Tue, 12 Dec 2006 22:47:01 +0000 (14:47 -0800)]
git-svn: allow dcommit to take an alternate head
Previously dcommit would unconditionally commit all patches
up-to and including the current HEAD. Now if an optional
command-line argument is specified, it will only commit
up to the specified revision.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 12 Dec 2006 22:47:00 +0000 (14:47 -0800)]
git-svn: enable logging of information not supported by git
The changes are now tracked in
$GIT_DIR/svn/$GIT_SVN_ID/untracked.log
Information in the untracked.log include:
* the addition and removal of empty directories
(changes of these will also warn the user)
* file and directory property changes, including (but not
limited to) svk:merge and svn:externals
* revision properties (revprops) are also tracked
* users will be warned of 'absent' file and directories
(if users are forbidden access)
Fields in entries are separated by spaces; "unsafe" characters
are URI-encoded so that each entry takes exactly one line.
There is currently no automated parser for dealing with the data
in untracked.log, but it should be possible to write one to
create empty directories on checkout and manage
externals/subprojects.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Tue, 12 Dec 2006 06:41:52 +0000 (06:41 +0000)]
Colourise git-branch output
I wanted to have a visual indication of which branches are local and
which are remote in git-branch -a output; however Junio was concerned
that someone might be using the output in a script. This patch
addresses the problem by colouring the git-branch output - which in
"auto" mode won't be activated.
I've based it off the colouring code for builtin-diff.c; which means
there is a branch color configuration variable that needs setting to
something before the color will appear.
The colour parameter is "color.branch" rather than "branch.color" to
avoid clashing with the default namespace for default branch merge
definitions.
This patch chooses green for local, red for remote and bold green for
current.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Robin Rosenberg [Sun, 10 Dec 2006 23:30:06 +0000 (00:30 +0100)]
Make cvsexportcommit work with filenames with spaces and non-ascii characters.
This patch uses git-apply to do the patching which simplifies the code a lot
and also uses one pass to git-diff. git-apply gives information on added,
removed files as well as which files are binary.
Removed the test for checking for matching binary files when deleting them
since git-apply happily deletes the file. This is matter of taste since we
allow some fuzz for text patches also.
Error handling was cleaned up, but not much tested.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 10 Dec 2006 23:51:54 +0000 (15:51 -0800)]
shortlog: fix segfault on empty authorname
The old code looked backwards from the email address to parse
the name, allowing an arbitrary number of spaces between the
two. However, in the case of no name, we looked back too far to
the 'author' (or 'Author:') header.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Jeff King originally fixed it by looking back only one
character; Johannes Schindelin pointed out that we could try
harder while at it to cope with commits with broken headers.
Junio C Hamano [Sun, 10 Dec 2006 23:55:07 +0000 (15:55 -0800)]
shortlog: remove "[PATCH]" prefix from shortlog output
Originally noticed by Nicolas Pitre; the real cause was the code
was prepared to deal with [PATCH] (and [PATCH n/m whatever])
prefixes but forgot that the string can be indented while acting
as a filter.
Junio C Hamano [Mon, 11 Dec 2006 22:12:12 +0000 (14:12 -0800)]
Merge branch 'maint'
* maint:
Make sure the empty tree exists when needed in merge-recursive.
Don't use memcpy when source and dest. buffers may overlap
no need to install manpages as executable
Shawn O. Pearce [Thu, 7 Dec 2006 10:17:07 +0000 (05:17 -0500)]
Make sure the empty tree exists when needed in merge-recursive.
There are some baseless merge cases where git-merge-recursive will
try to compare one of the branches against the empty tree. However
most projects won't have the empty tree object in their object database
as Git does not normally create empty tree objects. If the empty tree
object is missing then the merge process will die, as it cannot load the
object from the database. The error message may make the user think that
their database is corrupt when its actually not.
So instead we should just create the empty tree object whenever it is
needed. If the object already exists as a loose object then no harm
done. Otherwise that loose object will be pruned away later by either
git-prune or git-prune-packed.
Thanks goes to Junio for suggesting this fix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
The reason for this was because an inexperienced user might
mistakenly think what is shown with the last-minute diff
contains all the change that is being committed (instead, what
the user asked to check was an incremental diff since what has
been staged so far). However, this turns out to only annoy
people who know what they are doing. Inexperienced people
would not be using the first "update-index" anyway, in which
case they would see the full changes in the "git diff".
Eric Wong [Fri, 8 Dec 2006 21:29:56 +0000 (13:29 -0800)]
rerere: record (or avoid misrecording) resolved, skipped or aborted rebase/am
Data in rr-cache isn't valid after a patch application is
skipped or and aborted, so our next commit could be misrecorded
as a resolution of that skipped/failed commit, which is wrong.
git-am --skip, git-rebase --skip/--abort will automatically
invoke git-rerere clear to avoid this.
Also, since git-am --resolved indicates a resolution was
succesful, remember to run git-rerere to record the resolution
(and not surprise the user when the next commit is made).
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Sat, 9 Dec 2006 03:58:50 +0000 (22:58 -0500)]
Documentation: simpler shared repository creation
Take Johannes Schindelin's suggestions for a further simplification of
the shared repository creation using git --bare init-db --shared, and
for a simplified cvsimport using an existing CVS working directory.
Also insert more man page references.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cvs-migration.txt | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-) Signed-off-by: Junio C Hamano <junkio@cox.net>
Jeff King [Sat, 9 Dec 2006 04:04:21 +0000 (23:04 -0500)]
shortlog: fix segfault on empty authorname
The old code looked backwards from the email address to parse the name,
allowing an arbitrary number of spaces between the two. However, in the case
of no name, we looked back too far to the 'author' (or 'Author:') header.
Instead, remove at most one space between name and address.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Add branch.*.merge warning and documentation update
This patch clarifies the meaning of the branch.*.merge option.
Previously, if branch.*.merge was specified but did not match any
ref, the message "No changes." was not really helpful regarding
the misconfiguration. This patch adds a warning for this.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 8 Dec 2006 22:07:45 +0000 (14:07 -0800)]
Fix perl/ build.
An earlier commit f848718a broke the build in perl/ directory by
allowing the Makefile.PL to overwrite the now-tracked Makefile.
Fix this by forcing Makefile.PL to produce its output in
perl.mak as the broken commit originally intended.
Eric Wong [Fri, 8 Dec 2006 10:20:17 +0000 (02:20 -0800)]
git-svn: use do_switch for --follow-parent if the SVN library supports it
do_switch works with the SVN Perl bindings after r22312 in the
Subversion trunk. Since no released version of SVN currently
supports it; we'll just autodetect it and enable its usage
when a user has a recent-enough version of SVN.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Fri, 8 Dec 2006 06:27:21 +0000 (01:27 -0500)]
Documentation: update git-clone man page with new behavior
Update git-clone man page to reflect recent changes
(--use-separate-remote default and use of .git/config instead of
remotes files), and rewrite introduction.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Thu, 7 Dec 2006 03:38:50 +0000 (16:38 +1300)]
cvsserver: Avoid miscounting bytes in Perl v5.8.x
At some point between v5.6 and 5.8 Perl started to assume its input,
output and filehandles are UTF-8. This breaks the counting of bytes
for the CVS protocol, resulting in the client expecting less data
than we actually send, and storing truncated files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Nicolas Pitre [Thu, 7 Dec 2006 04:01:00 +0000 (23:01 -0500)]
change the unpack limit treshold to a saner value
Currently the treshold is 5000. The likelihood of this value to ever be
crossed for a single push is really small making it not really useful.
The optimal treshold for a pure space saving on a filesystem with 4kb
blocks is 3. However this is likely to create many small packs
concentrating a large number of files in a single directory compared to
the same objects which are spread over 256 directories when loose. This
means we would need 512 objects per pack on average to approximagte the
same directory cost (a pack has 2 files because of the index).
But 512 is a really high value just like 5000 since most pushes are
unlikely to have that many objects. So let's try with a value of 100
which should have a good balance between small pushes going to be
exploded into loose objects and large pushes kept as whole packs.
This is not a replacement for periodic repacks of course.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Thu, 7 Dec 2006 04:18:05 +0000 (23:18 -0500)]
Documentation: reorganize cvs-migration.txt
Modify cvs-migration.txt so it explains first how to develop against a
shared repository, then how to set up a shared repository, then how to
import a repository from cvs. Though this seems chronologically
backwards, it's still readable in this order, and it puts the more
commonly needed material closer to the front.
Remove the annotate/pickaxe section; perhaps it can find a place elsewhere
in the future. Remove most of the "why git is better than cvs" stuff from
the introduction.
Add some minor clarifications, including two that have come up several
times on the mailing list:
1. Recommend committing any changes before running pull.
2. Note that changes must be commited before they can be pushed.
Update the clone discussion to reflect the new --use-separate-remotes
default, and add a brief mention of git-cvsserver.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Wed, 6 Dec 2006 12:07:23 +0000 (12:07 +0000)]
Explicitly add the default "git pull" behaviour to .git/config on clone
Without any specification in the .git/config file, git-pull will execute
"git-pull origin"; which in turn defaults to pull from the first "pull"
definition for the remote, "origin".
This is a difficult set of defaults to track for a new user, and it's
difficult to see what tells git to do this (especially when it is
actually hard-coded behaviour). To ameliorate this slightly, this patch
explicitly specifies the default behaviour during a clone using the
"branch" section of the config.
For example, a clone of a typical repository would create a .git/config
containing:
[remote "origin"]
url = proto://host/repo.git
fetch = refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
The [branch "master"] section is such that there is no change to the
functionality of git-pull, but that functionality is now explicitly
documented.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Junio C Hamano [Wed, 6 Dec 2006 19:22:55 +0000 (11:22 -0800)]
git-merge: fix "fix confusion between tag and branch" for real
An earlier commit 3683dc5a broke the merge message generation with
a careless use of && where it was not needed, breaking the merge
message for cases where non branches are given.
Eric Wong [Mon, 4 Dec 2006 08:51:16 +0000 (00:51 -0800)]
git-svn: avoid network timeouts for long-running fetches
Long-running fetches run inside children to avoid memory leaks.
When we refork, the connection in the parent can be idle for a
long time; attempting to reuse it in the next child can result
in timeouts.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 4 Dec 2006 22:47:22 +0000 (23:47 +0100)]
gitweb: Allow PNG, GIF, JPEG images to be displayed in "blob" view
Allow images in one of web formats (PNG, GIF, JPEG) - actually files
with mimetype of image/png, image/git, image/jpeg - to be displayed in
"blob" view using <img /> element, instead of using "blob_plain" view
for them, like for all other files except also text/* mimetype files.
This makes possible to easily go to file history, to HEAD version of
the file, to appropriate commit etc; all of those are not available
in "blob_plain" (raw) view.
Only text files can have "blame" view link in the formats part of
navbar.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 6 Dec 2006 18:52:04 +0000 (10:52 -0800)]
git-merge: squelch needless error message.
While deciding if the new style command line argument is a tag
or a branch, we checked it with "git show-ref -s --verify" to
see if results in an error, but when it is not a branch, the
check leaked the error message out, which was not needed to be
shown to the end user.
Junio C Hamano [Tue, 5 Dec 2006 03:44:40 +0000 (19:44 -0800)]
git-reset to remove "$GIT_DIR/MERGE_MSG"
An earlier commit a9cb3c6e changed git-commit to use the
contents of MERGE_MSG even when we do not have MERGE_HEAD (the
rationale is in its log message).
However, the change tricks the following sequence to include a
merge message in a completely unrelated commit:
$ git pull somewhere
: oops, the conflicts are too much. forget it.
$ git reset --hard
: work work work
$ git commit
To fix this confusion, this patch makes "git reset" to remove
the leftover MERGE_MSG that was prepared when the user abandoned
the merge.
Signed-off-by: Junio C Hamano <junkio@cox.net> Acked-by: Luben Tuikov <ltuikov@yahoo.com
Rename the section titles to make the "how-to" content of the section
obvious. Also clarify that changes have to be commited before they can
be pushed.
Lars Hjemli [Tue, 28 Nov 2006 14:47:40 +0000 (15:47 +0100)]
git-branch: add options and tests for branch renaming
Extend git-branch with the following options:
git-branch -m|-M [<oldbranch>] newbranch
The -M variation is required to force renaming over an exsisting
branchname.
This also indroduces $GIT_DIR/RENAME_REF which is a "metabranch"
used when renaming branches. It will always hold the original sha1
for the latest renamed branch.
Additionally, if $GIT_DIR/logs/RENAME_REF exists, all branch rename
events are logged there.
Finally, some testcases are added to verify the new options.
Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Tue, 5 Dec 2006 00:00:46 +0000 (16:00 -0800)]
read-tree: further loosen "working file will be lost" check.
This follows up commit ed93b449 where we removed overcautious
"working file will be lost" check.
A new option "--exclude-per-directory=.gitignore" can be used to
tell the "git-read-tree" command that the user does not mind
losing contents in untracked files in the working tree, if they
need to be overwritten by a merge (either a two-way "switch
branches" merge, or a three-way merge).
Suppose you have changes in new1 to the original lines 10-20,
and changes in new2 to the original lines 15-25, then the
changes to 10-25 conflict. But it is possible that the next
changes in new1 still overlap with this change to new2.
So, in the next iteration we have to look at the same change
to new2 again.
The old code tried to be a bit too clever. The new code is
shorter and more to the point: do not fiddle with the ranges
at all.
Also, xdl_append_merge() tries harder to combine conflicts.
This is necessary, because with the above simplification,
some conflicts would not be recognized as conflicts otherwise:
In the above scenario, it is possible that there is no other
change to new1. Absent the combine logic, the change in new2
would be recorded _again_, but as a non-conflict.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Nicolas Pitre [Mon, 4 Dec 2006 16:13:39 +0000 (11:13 -0500)]
make 'git add' a first class user friendly interface to the index
This brings the power of the index up front using a proper mental model
without talking about the index at all. See for example how all the
technical discussion has been evacuated from the git-add man page.
Any content to be committed must be added together. Whether that
content comes from new files or modified files doesn't matter. You
just need to "add" it, either with git-add, or by providing
git-commit with -a (for already known files only of course).
No need for a separate command to distinguish new vs modified files
please. That would only screw the mental model everybody should have
when using GIT.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 3 Dec 2006 16:24:41 +0000 (17:24 +0100)]
Document git-diff whitespace flags -b and -w
Document git diff options -b / --ignore-space-change and
-w / --ignore-all-space, introduced by Johannes Schindelin
in commit 0d21efa5, "Teach diff about -b and -w flags".
The description of options is taken from GNU diff man page and
GNU Diffutils info documentation.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 4 Dec 2006 10:11:39 +0000 (02:11 -0800)]
unpack-trees: make sure "df_conflict_entry.name" is NUL terminated.
The structure that ends with a flexible array member (or 0
length array with older GCC) "char name[FLEX_ARRAY]" is
allocated on the stack and we use it after clearing its entire
size with memset. That does not guarantee that "name" is
properly NUL terminated as we intended on platforms with more
forgiving structure alignment requirements.
projects / thirdparty / git.git / log
