For DQ queue format in raw DMA addressing(RDA) mode,
implement page pool recycling of buffers by leveraging
a few helper functions.
DQ QPL mode will continue to use the exisiting recycling
logic. This is because in QPL mode, the pages come from a
constant set of pages that the driver pre-allocates and
registers with the device.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Shailend Chand <shailend@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241014202108.1051963-3-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gve: move DQO rx buffer management related code to a new file
In preparation for the upcoming page pool adoption for DQO
raw addressing mode, move RX buffer management code to a new
file. In the follow on patches, page pool code will be added
to this file.
No functional change, just movement of code.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Shailend Chand <shailend@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241014202108.1051963-2-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
do not leave dangling sk pointers in pf->create functions
Some protocol family create() implementations have an error path after
allocating the sk object and calling sock_init_data(). sock_init_data()
attaches the allocated sk object to the sock object, provided by the
caller.
If the create() implementation errors out after calling sock_init_data(),
it releases the allocated sk object, but the caller ends up having a
dangling sk pointer in its sock object on return. Subsequent manipulations
on this sock object may try to access the sk pointer, because it is not
NULL thus creating a use-after-free scenario.
We have implemented a stable hotfix in commit 631083143315
("net: explicitly clear the sk pointer, when pf->create fails"), but this
series aims to fix it properly by going through each of the pf->create()
implementations and making sure they all don't return a sock object with
a dangling pointer on error.
====================
Ignat Korchagin [Mon, 14 Oct 2024 15:38:06 +0000 (16:38 +0100)]
net: inet6: do not leave a dangling sk pointer in inet6_create()
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-8-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ignat Korchagin [Mon, 14 Oct 2024 15:38:05 +0000 (16:38 +0100)]
net: inet: do not leave a dangling sk pointer in inet_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.
Clear the sk pointer in the sock object on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-7-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ignat Korchagin [Mon, 14 Oct 2024 15:38:04 +0000 (16:38 +0100)]
net: ieee802154: do not leave a dangling sk pointer in ieee802154_create()
sock_init_data() attaches the allocated sk object to the provided sock
object. If ieee802154_create() fails later, the allocated sk object is
freed, but the dangling pointer remains in the provided sock object, which
may allow use-after-free.
Ignat Korchagin [Mon, 14 Oct 2024 15:38:03 +0000 (16:38 +0100)]
net: af_can: do not leave a dangling sk pointer in can_create()
On error can_create() frees the allocated sk object, but sock_init_data()
has already attached it to the provided sock object. This will leave a
dangling sk pointer in the sock object and may cause use-after-free later.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20241014153808.51894-5-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ignat Korchagin [Mon, 14 Oct 2024 15:38:02 +0000 (16:38 +0100)]
Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc()
bt_sock_alloc() attaches allocated sk object to the provided sock object.
If rfcomm_dlc_alloc() fails, we release the sk object, but leave the
dangling pointer in the sock object, which may cause use-after-free.
Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-4-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ignat Korchagin [Mon, 14 Oct 2024 15:38:01 +0000 (16:38 +0100)]
Bluetooth: L2CAP: do not leave dangling sk pointer on error in l2cap_sock_create()
bt_sock_alloc() allocates the sk object and attaches it to the provided
sock object. On error l2cap_sock_alloc() frees the sk object, but the
dangling pointer is still attached to the sock object, which may create
use-after-free in other code.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-3-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ignat Korchagin [Mon, 14 Oct 2024 15:38:00 +0000 (16:38 +0100)]
af_packet: avoid erroring out after sock_init_data() in packet_create()
After sock_init_data() the allocated sk object is attached to the provided
sock object. On error, packet_create() frees the sk object leaving the
dangling pointer in the sock object on return. Some other code may try
to use this pointer and cause use-after-free.
Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-2-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/sched: cbs: Fix integer overflow in cbs_set_port_rate()
The subsequent calculation of port_rate = speed * 1000 * BYTES_PER_KBIT,
where the BYTES_PER_KBIT is of type LL, may cause an overflow.
At least when speed = SPEED_20000, the expression to the left of port_rate
will be greater than INT_MAX.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
cxgb4_get_srq_entry() has been unused since 2018's commit e47094751ddc ("cxgb4: Add support to initialise/read SRQ entries")
which added it.
Remove it.
Note: I'm a bit suspicious whether any of the srq code in there
actually does anything useful; without this get I can't see anything
that reads the data, so perhaps the whole thing should go?
But that however would remove one of the opcode handlers, and I have
no way to test that.
cxgb4_alloc_raw_mac_filt() and cxgb4_free_raw_mac_filt() have been
unused since they were added in 2019 commit 5fab51581f62 ("cxgb4: Add MPS TCAM refcounting for raw mac filters")
Remove them.
This was also the last use of cxgb4_mps_ref_dec().
Remove it.
cxgb4_alloc_encap_mac_filt() and cxgb4_free_encap_mac_filt() have been
unused since
commit 28b3870578ef ("cxgb4: Re-work the logic for mps refcounting")
Introduced by commit 9d9326d3bc0e ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c: In function 'fs_mii_bitbang_init':
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:126:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
126 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/ Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-2-dcc9afb8858b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduced by commit 9d9326d3bc0e ("phy: Change mii_bus id field to a string")
Flagged by gcc-14 as:
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c: In function 'mpc52xx_fec_mdio_probe':
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c:97:46: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
97 | snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
| ~^ ~~~~~~~~~
| | |
| | resource_size_t {aka long long unsigned int}
| unsigned int
| %llx
No functional change intended.
Compile tested only.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/netdev/711d7f6d-b785-7560-f4dc-c6aad2cce99@linux-m68k.org/ Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Link: https://patch.msgid.link/20241014-net-pa-fmt-v1-1-dcc9afb8858b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 15 Oct 2024 17:55:16 +0000 (10:55 -0700)]
Merge branch 'net-string-format-safety-updates'
Simon Horman says:
====================
net: String format safety updates
This series addresses string format safety issues that are
flagged by tooling in files touched by recent patches.
I do not believe that any of these issues are bugs.
Rather, I am providing these updates as I think there is a value
in addressing such warnings so real problems stand out.
Simon Horman [Mon, 14 Oct 2024 08:52:26 +0000 (09:52 +0100)]
net: txgbe: Pass string literal as format argument of alloc_workqueue()
Recently I noticed that both gcc-14 and clang-18 report that passing
a non-string literal as the format argument of clkdev_create()
is potentially insecure.
E.g. clang-18 says:
.../txgbe_phy.c:582:35: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
581 | clock = clkdev_create(clk, NULL, clk_name);
| ^~~~~~~~
.../txgbe_phy.c:582:35: note: treat the string as an argument to avoid this
581 | clock = clkdev_create(clk, NULL, clk_name);
| ^
| "%s",
It is always the case where the contents of clk_name is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
However, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Simon Horman [Mon, 14 Oct 2024 08:52:25 +0000 (09:52 +0100)]
net: dsa: microchip: copy string using strscpy
Prior to this patch ksz_ptp_msg_irq_setup() uses snprintf() to copy
strings. It does so by passing strings as the format argument of
snprintf(). This appears to be safe, due to the absence of format
specifiers in the strings, which are declared within the same function.
But nonetheless GCC 14 warns about it:
.../ksz_ptp.c:1109:55: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
1109 | snprintf(ptpmsg_irq->name, sizeof(ptpmsg_irq->name), name[n]);
| ^~~~~~~
.../ksz_ptp.c:1109:55: note: treat the string as an argument to avoid this
1109 | snprintf(ptpmsg_irq->name, sizeof(ptpmsg_irq->name), name[n]);
| ^
| "%s",
As what we are really dealing with here is a string copy, it seems make
sense to use a function designed for this purpose. In this case null
padding is not required, so strscpy is appropriate. And as the
destination is an array of fixed size, the 2-argument variant may be used.
====================
replace call_rcu by kfree_rcu for simple kmem_cache_free callback
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were done using the following Coccinelle semantic patch.
This semantic patch is designed to ignore cases where the callback
function is used in another way.
// <smpl>
@r@
expression e;
local idexpression e2;
identifier cb,f,g;
position p;
@@
Julia Lawall [Sun, 13 Oct 2024 20:17:01 +0000 (22:17 +0200)]
kcm: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
Julia Lawall [Sun, 13 Oct 2024 20:16:55 +0000 (22:16 +0200)]
net: bridge: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Link: https://patch.msgid.link/20241013201704.49576-9-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julia Lawall [Sun, 13 Oct 2024 20:16:51 +0000 (22:16 +0200)]
ipv6: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Link: https://patch.msgid.link/20241013201704.49576-5-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julia Lawall [Sun, 13 Oct 2024 20:16:50 +0000 (22:16 +0200)]
inetpeer: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Link: https://patch.msgid.link/20241013201704.49576-4-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julia Lawall [Sun, 13 Oct 2024 20:16:49 +0000 (22:16 +0200)]
ipv4: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Link: https://patch.msgid.link/20241013201704.49576-3-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi [Sat, 12 Oct 2024 09:01:11 +0000 (11:01 +0200)]
net: airoha: Implement BQL support
Introduce BQL support in the airoha_eth driver reporting to the kernel
info about tx hw DMA queues in order to avoid bufferbloat and keep the
latency small.
Daniel Golle [Sun, 13 Oct 2024 13:16:44 +0000 (14:16 +0100)]
net: phy: aquantia: fix return value check in aqr107_config_mdi()
of_property_read_u32() returns -EINVAL in case the property cannot be
found rather than -ENOENT. Fix the check to not abort probing in case
of the property being missing, and also in case CONFIG_OF is not set
which will result in -ENOSYS.
Fixes: a2e1ba275eae ("net: phy: aquantia: allow forcing order of MDI pairs") Reported-by: Jon Hunter <jonathanh@nvidia.com> Closes: https://lore.kernel.org/all/114b4c03-5d16-42ed-945d-cf78eabea12b@nvidia.com/ Suggested-by: Hans-Frieder Vogt <hfdevel@gmx.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://patch.msgid.link/f8282e2fc6a5ac91fe91491edc7f1ca8f4a65a0d.1728825323.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: af_packet: allow joining a fanout when link is down
PACKET socket can retain its fanout membership through link down and up
and leave a fanout while closed regardless of link state.
However, socket was forbidden from joining a fanout while it was not
RUNNING.
This scenario was identified while studying DPDK pmd_af_packet_drv.
Since sockets are only created during initialization, there is no reason
to fail the initialization if a single link is temporarily down.
This patch allows PACKET socket to join a fanout while not RUNNING.
Selftest psock_fanout is extended to test this "fanout while link down"
scenario.
Selftest psock_fanout is also extended to test fanout create/join by
socket that did not bind or specified a protocol, which carries an
implicit bind.
Gur Stavi [Sun, 13 Oct 2024 07:15:26 +0000 (10:15 +0300)]
selftests: net/psock_fanout: socket joins fanout when link is down
Modify test_control_group to have toggle parameter.
When toggle is non-zero, loopback device will be set down for the
initialization of fd[1] which is still expected to successfully join
the fanout.
Gur Stavi [Sun, 13 Oct 2024 07:15:25 +0000 (10:15 +0300)]
af_packet: allow fanout_add when socket is not RUNNING
PACKET socket can retain its fanout membership through link down and up
and leave a fanout while closed regardless of link state.
However, socket was forbidden from joining a fanout while it was not
RUNNING.
This patch allows PACKET socket to join fanout while not RUNNING.
Socket can be RUNNING if it has a specified protocol. Either directly
from packet_create (being implicitly bound to any interface) or following
a successful bind. Socket RUNNING state is switched off if it is bound to
an interface that went down.
Instead of the test for RUNNING, this patch adds a test that socket can
become RUNNING.
Paolo Abeni [Tue, 15 Oct 2024 13:28:16 +0000 (15:28 +0200)]
Merge tag 'batadv-next-pullrequest-20241015' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Add flex array to struct batadv_tvlv_tt_data, by Erick Archer
- Use string choice helper to print booleans, by Sven Eckelmann
- replace call_rcu by kfree_rcu for simple kmem_cache_free callback,
by Julia Lawall
* tag 'batadv-next-pullrequest-20241015' of git://git.open-mesh.org/linux-merge:
batman-adv: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
batman-adv: Use string choice helper to print booleans
batman-adv: Add flex array to struct batadv_tvlv_tt_data
batman-adv: Start new development cycle
====================
The following pull-request contains BPF updates for your *net-next* tree.
We've added 21 non-merge commits during the last 18 day(s) which contain
a total of 21 files changed, 1185 insertions(+), 127 deletions(-).
The main changes are:
1) Put xsk sockets on a struct diet and add various cleanups. Overall, this helps
to bump performance by 12% for some workloads, from Maciej Fijalkowski.
3) Extend netkit with an option to delegate skb->{mark,priority} scrubbing to
its BPF program, from Daniel Borkmann.
4) Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs,
from Mahe Tardy.
5) Extend BPF selftests covering a BPF program setting socket options per MPTCP
subflow, from Geliang Tang and Nicolas Rybowski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (21 commits)
xsk: Use xsk_buff_pool directly for cq functions
xsk: Wrap duplicated code to function
xsk: Carry a copy of xdp_zc_max_segs within xsk_buff_pool
xsk: Get rid of xdp_buff_xsk::orig_addr
xsk: s/free_list_node/list_node/
xsk: Get rid of xdp_buff_xsk::xskb_list_node
selftests/bpf: check program redirect in xdp_cpumap_attach
selftests/bpf: make xdp_cpumap_attach keep redirect prog attached
selftests/bpf: fix bpf_map_redirect call for cpu map test
selftests/bpf: add tcx netns cookie tests
bpf: add get_netns_cookie helper to tc programs
selftests/bpf: add missing header include for htons
selftests/bpf: Extend netkit tests to validate skb meta data
tools: Sync if_link.h uapi tooling header
netkit: Add add netkit scrub support to rt_link.yaml
netkit: Simplify netkit mode over to use NLA_POLICY_MAX
netkit: Add option for scrubbing skb meta data
bpf: Remove unused macro
selftests/bpf: Add mptcp subflow subtest
selftests/bpf: Add getsockopt to inspect mptcp subflow
...
====================
Jakub Kicinski [Thu, 10 Oct 2024 15:12:48 +0000 (08:12 -0700)]
tools: ynl-gen: use names of constants in generated limits
YNL specs can use string expressions for limits, like s32-min
or u16-max. We convert all of those into their numeric values
when generating the code, which isn't always helpful. Try to
retain the string representations in the output. Any sort of
calculations still need the integers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20241010151248.2049755-1-kuba@kernel.org
[pabeni@redhat.com: regenerated netdev-genl-gen.c] Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Golle [Thu, 10 Oct 2024 12:55:17 +0000 (13:55 +0100)]
net: phy: mxl-gpy: correctly describe LED polarity
According the datasheet covering the LED (0x1b) register:
0B Active High LEDx pin driven high when activated
1B Active Low LEDx pin driven low when activated
Make use of the now available 'active-high' property and correctly
reflect the polarity setting which was previously inverted.
Daniel Golle [Thu, 10 Oct 2024 12:55:00 +0000 (13:55 +0100)]
net: phy: aquantia: correctly describe LED polarity override
Use newly defined 'active-high' property to set the
VEND1_GLOBAL_LED_DRIVE_VDD bit and let 'active-low' clear that bit. This
reflects the technical reality which was inverted in the previous
description in which the 'active-low' property was used to actually set
the VEND1_GLOBAL_LED_DRIVE_VDD bit, which means that VDD (ie. supply
voltage) of the LED is driven rather than GND.
Daniel Golle [Thu, 10 Oct 2024 12:54:19 +0000 (13:54 +0100)]
net: phy: support 'active-high' property for PHY LEDs
In addition to 'active-low' and 'inactive-high-impedance' also
support 'active-high' property for PHY LED pin configuration.
As only either 'active-high' or 'active-low' can be set at the
same time, WARN and return an error in case both are set.
====================
make PHY output RMII reference clock
The TJA11xx PHYs have the capability to provide 50MHz reference clock
in RMII mode and output on REF_CLK pin. Therefore, add the new property
"nxp,rmii-refclk-output" to support this feature. This property is only
available for PHYs which use nxp-c45-tja11xx driver, such as TJA1103,
TJA1104, TJA1120 and TJA1121.
====================
Wei Fang [Thu, 10 Oct 2024 06:19:44 +0000 (14:19 +0800)]
net: phy: c45-tja11xx: add support for outputting RMII reference clock
For TJA11xx PHYs, they have the capability to output 50MHz reference
clock on REF_CLK pin in RMII mode, which is called "revRMII" mode in
the PHY data sheet.
Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Per the RMII specification, the REF_CLK is sourced from MAC to PHY
or from an external source. But for TJA11xx PHYs, they support to
output a 50MHz RMII reference clock on REF_CLK pin. Previously the
"nxp,rmii-refclk-in" was added to indicate that in RMII mode, if
this property present, REF_CLK is input to the PHY, otherwise it
is output. This seems inappropriate now. Because according to the
RMII specification, the REF_CLK is originally input, so there is
no need to add an additional "nxp,rmii-refclk-in" property to
declare that REF_CLK is input.
Unfortunately, because the "nxp,rmii-refclk-in" property has been
added for a while, and we cannot confirm which DTS use the TJA1100
and TJA1101 PHYs, changing it to switch polarity will cause an ABI
break. But fortunately, this property is only valid for TJA1100 and
TJA1101. For TJA1103/TJA1104/TJA1120/TJA1121 PHYs, this property is
invalid because they use the nxp-c45-tja11xx driver, which is a
different driver from TJA1100/TJA1101. Therefore, for PHYs using
nxp-c45-tja11xx driver, add "nxp,rmii-refclk-out" property to
support outputting RMII reference clock on REF_CLK pin.
Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Fri, 11 Oct 2024 23:03:11 +0000 (16:03 -0700)]
selftests: net: move EXTRA_CLEAN of libynl.a into ynl.mk
Commit 1fd9e4f25782 ("selftests: make kselftest-clean remove libynl outputs")
added EXTRA_CLEAN of YNL generated files to ynl.mk. We already had
a EXTRA_CLEAN in the file including the snippet. Consolidate them.
Jakub Kicinski [Fri, 11 Oct 2024 23:03:10 +0000 (16:03 -0700)]
selftests: net: rebuild YNL if dependencies changed
Try to rebuild YNL if either user added a new family or the specs
of the families have changed. Stanislav's ncdevmem cause a false
positive build failure in NIPA because libynl.a isn't rebuilt
after ethtool is added to YNL_GENS.
Note that sha1sum is already used in other parts of the build system.
====================
Add support for per-NAPI config via netlink
Greetings:
Welcome to v6. Minor changes from v5 [1], please see changelog below.
There were no explicit comments from reviewers on the call outs in my
v5, so I'm retaining them from my previous cover letter just in case :)
A few important call outs for reviewers:
1. This revision seems to work (see below for a full walk through). I
think this is the behavior we talked about, but please let me know if
a use case is missing.
2. Re a previous point made by Stanislav regarding "taking over a NAPI
ID" when the channel count changes: mlx5 seems to call napi_disable
followed by netif_napi_del for the old queues and then calls
napi_enable for the new ones. In this RFC, the NAPI ID generation is
deferred to napi_enable. This means we won't end up with two of the
same NAPI IDs added to the hash at the same time.
Can we assume all drivers will napi_disable the old queues before
napi_enable the new ones?
- If yes: we might not need to worry about a NAPI ID takeover
function.
- If no: I'll need to make a change so that the NAPI ID generation
is deferred only for drivers which have opted into the config
space via calls to netif_napi_add_config
3. I made the decision to remove the WARN_ON_ONCE that (I think?)
Jakub previously suggested in alloc_netdev_mqs (WARN_ON_ONCE(txqs
!= rxqs);) because this was triggering on every kernel boot with my
mlx5 NIC.
4. I left the "maxqs = max(txqs, rxqs);" in alloc_netdev_mqs despite
thinking this is a bit strange. I think it's strange that we might
be short some number of NAPI configs, but it seems like most people
are in favor of this approach, so I've left it.
I'd appreciate thoughts from reviewers on the above items, if at all
possible.
Now, on to the implementation.
Firstly, this implementation moves certain settings to napi_struct so that
they are "per-NAPI", while taking care to respect existing sysfs
parameters which are interface wide and affect all NAPIs:
- NAPI ID
- gro_flush_timeout
- defer_hard_irqs
Furthermore:
- NAPI ID generation and addition to the hash is now deferred to
napi_enable, instead of during netif_napi_add
- NAPIs are removed from the hash during napi_disable, instead of
netif_napi_del.
- An array of "struct napi_config" is allocated in net_device.
IMPORTANT: The above changes affect all network drivers.
Optionally, drivers may opt-in to using their config space by calling
netif_napi_add_config instead of netif_napi_add.
If a driver does this, the NAPI being added is linked with an allocated
"struct napi_config" and the per-NAPI settings (including NAPI ID) are
persisted even as hardware queues are destroyed and recreated.
To help illustrate how this would end up working, I've added patches for
3 drivers, of which I have access to only 1:
- mlx5 which is the basis of the examples below
- mlx4 which has TX only NAPIs, just to highlight that case. I have
only compile tested this patch; I don't have this hardware.
- bnxt which I have only compiled tested. I don't have this
hardware.
NOTE: I only tested this on mlx5; I have no access to the other hardware
for which I provided patches. Hopefully other folks can help test :)
Here's how it works when I test it on my mlx5 system:
Joe Damato [Fri, 11 Oct 2024 18:45:00 +0000 (18:45 +0000)]
net: napi: Add napi_config
Add a persistent NAPI config area for NAPI configuration to the core.
Drivers opt-in to setting the persistent config for a NAPI by passing an
index when calling netif_napi_add_config.
napi_config is allocated in alloc_netdev_mqs, freed in free_netdev
(after the NAPIs are deleted).
Drivers which call netif_napi_add_config will have persistent per-NAPI
settings: NAPI IDs, gro_flush_timeout, and defer_hard_irq settings.
Per-NAPI settings are saved in napi_disable and restored in napi_enable.
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca> Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca> Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241011184527.16393-6-jdamato@fastly.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Damato [Fri, 11 Oct 2024 18:44:58 +0000 (18:44 +0000)]
net: napi: Make gro_flush_timeout per-NAPI
Allow per-NAPI gro_flush_timeout setting.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device gro_flush_timeout
field. Reads from sysfs will read from the net_device field.
The ability to set gro_flush_timeout on specific NAPI instances will be
added in a later commit, via netdev-genl.
Joe Damato [Fri, 11 Oct 2024 18:44:56 +0000 (18:44 +0000)]
net: napi: Make napi_defer_hard_irqs per-NAPI
Add defer_hard_irqs to napi_struct in preparation for per-NAPI
settings.
The existing sysfs parameter is respected; writes to sysfs will write to
all NAPI structs for the device and the net_device defer_hard_irq field.
Reads from sysfs show the net_device field.
The ability to set defer_hard_irqs on specific NAPI instances will be
added in a later commit, via netdev-genl.
Daniel Golle [Fri, 11 Oct 2024 03:40:39 +0000 (04:40 +0100)]
net: phylink: allow half-duplex modes with RATE_MATCH_PAUSE
PHYs performing rate-matching using MAC-side flow-control always
perform duplex-matching as well in case they are supporting
half-duplex modes at all.
No longer remove half-duplex modes from their capabilities.
Eric Dumazet [Thu, 10 Oct 2024 17:48:13 +0000 (17:48 +0000)]
net: add TIME_WAIT logic to sk_to_full_sk()
TCP will soon attach TIME_WAIT sockets to some ACK and RST.
Make sure sk_to_full_sk() detects this and does not return
a non full socket.
v3: also changed sk_const_to_full_sk()
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Brian Vazquez <brianvv@google.com> Link: https://patch.msgid.link/20241010174817.1543642-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman [Wed, 9 Oct 2024 09:40:10 +0000 (10:40 +0100)]
tg3: Address byte-order miss-matches
Address byte-order miss-matches flagged by Sparse.
In tg3_load_firmware_cpu() and tg3_get_device_address()
this is done using appropriate types to store big endian values.
In the cases of tg3_test_nvram(), where buf is an array which
contains values of several different types, cast to __le32
before converting values to host byte order.
Reported by Sparse as:
.../tg3.c:3745:34: warning: cast to restricted __be32
.../tg3.c:13096:21: warning: cast to restricted __le32
.../tg3.c:13096:21: warning: cast from restricted __be32
.../tg3.c:13101:21: warning: cast to restricted __le32
.../tg3.c:13101:21: warning: cast from restricted __be32
.../tg3.c:17070:63: warning: incorrect type in argument 3 (different base types)
.../tg3.c:17070:63: expected restricted __be32 [usertype] *val
.../tg3.c:17070:63: got unsigned int *
dr.../tg3.c:17071:63: warning: incorrect type in argument 3 (different base types)
.../tg3.c:17071:63: expected restricted __be32 [usertype] *val
.../tg3.c:17071:63: got unsigned int *
Also, address white-space issues on lines modified for the above.
And, for consistency, lines adjacent to them.
Compile tested only.
No functional change intended.
Currently xsk_cq_{reserve_addr,submit,cancel}_locked() take xdp_sock as
an input argument but it is only used for pulling out xsk_buff_pool
pointer from it.
Change mentioned functions to take pool pointer as an input argument to
avoid unnecessary dereferences.
Continue the process of dieting xdp_buff_xsk by removing orig_addr
member. It can be calculated from xdp->data_hard_start where it was
previously used, so it is not anything that has to be carried around in
struct used widely in hot path.
This has been used for initializing xdp_buff_xsk::frame_dma during pool
setup and as a shortcut in xp_get_handle() to retrieve address provided
to xsk Rx queue.
Let's bring xdp_buff_xsk back to occupying 2 cachelines by removing
xskb_list_node - for the purpose of gathering the xskb frags
free_list_node can be used, head of the list (xsk_buff_pool::xskb_list)
stays as-is, just reuse the node ptr.
It is safe to do as a single xdp_buff_xsk can never reside in two
pool's lists simultaneously.
David S. Miller [Mon, 14 Oct 2024 12:20:41 +0000 (13:20 +0100)]
Merge branch 'net-ti-ethernet-warnings'
Simon Horman says:
====================
net: ethernet: ti: Address some warnings
This patchset addresses some warnings flagged by Sparse, and clang-18 in
TI Ethernet drivers.
Although these changes do not alter the functionality of the code, by
addressing them real problems introduced in future which are flagged by
tooling will stand out more readily.
Compile tested only.
---
Changes in v2:
- Dropped patch to directly address __percpu Sparse warnings and, instead
- Add patch to use tstats
- Added tags
- Thanks to all for the review of v1
- Link to v1: https://lore.kernel.org/r/20240910-ti-warn-v1-0-afd1e404abbe@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Compile tested only.
No functional change intended.
Suggested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/all/20240911170643.7ecb1bbb@kernel.org/ Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Thu, 10 Oct 2024 11:04:10 +0000 (12:04 +0100)]
net: ethernet: ti: am65-cpsw: Use __be64 type for id_temp
The id_temp local variable in am65_cpsw_nuss_probe() is
used to hold a 64-bit big-endian value as it is assigned using
cpu_to_be64().
It is read using memcpy(), where it is written as an identifier into a
byte-array. So this can also be treated as big endian.
As it's type is currently host byte order (u64), sparse flags
an endian mismatch when compiling for little-endian systems:
.../am65-cpsw-nuss.c:3454:17: warning: incorrect type in assignment (different base types)
.../am65-cpsw-nuss.c:3454:17: expected unsigned long long [usertype] id_temp
.../am65-cpsw-nuss.c:3454:17: got restricted __be64 [usertype]
Address this by using __be64 as the type of id_temp.
No functional change intended.
Compile tested only.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 10 Oct 2024 10:58:02 +0000 (12:58 +0200)]
r8169: enable SG/TSO on selected chip versions per default
Due to problem reports in the past SG and TSO/TSO6 are disabled per
default. It's not fully clear which chip versions are affected, so we
may impact also users of unaffected chip versions, unless they know
how to use ethtool for enabling SG/TSO/TSO6.
Vendor drivers r8168/r8125 enable SG/TSO/TSO6 for selected chip
versions per default, I'd interpret this as confirmation that these
chip versions are unaffected. So let's do the same here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Sun, 13 Oct 2024 20:16:53 +0000 (22:16 +0200)]
batman-adv: replace call_rcu by kfree_rcu for simple kmem_cache_free callback
Since SLOB was removed and since
commit 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
David S. Miller [Sun, 13 Oct 2024 17:02:50 +0000 (18:02 +0100)]
Merge branch 'ethtool-write-firmware'
Danielle Ratson says:
====================
ethtool: Add support for writing firmware
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management functions
that require a larger amount of data, so writing firmware blocks using EPL
is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add support for writing firmware block using EPL payload, both to support
modules that support only EPL write mechanism, and to optimize the flashing
process of modules that support LPL and EPL.
Running the flashing command on the same sample module using EPL vs. LPL
showed an improvement of 84%.
Patchset overview:
Patch #1: preparations
Patch #2: Add EPL support
v5: Resending- no changes.
v4: Resending the right version after wrong v3.
No changes from v2.
v2:
* Fix the commit meassges to align the cover letter about the
right meaning of LPL and EPL.
Patch #2:
* Initialize the variable 'bytes_written' before the first
iteration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 9 Oct 2024 10:53:47 +0000 (13:53 +0300)]
net: ethtool: Add support for writing firmware blocks using EPL payload
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management
functions that require a larger amount of data, so writing firmware
blocks using EPL is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add support for writing firmware block using EPL payload, both to
support modules that supports only EPL write mechanism, and to optimize
the flashing process of modules that support LPL and EPL.
Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 9 Oct 2024 10:53:46 +0000 (13:53 +0300)]
net: ethtool: Add new parameters and a function to support EPL
In the CMIS specification for pluggable modules, LPL (Local Payload) and
EPL (Extended Payload) are two types of data payloads used for managing
various functions and features of the module.
EPL payloads are used for more complex and extensive management
functions that require a larger amount of data, so writing firmware
blocks using EPL is much more efficient.
Currently, only LPL payload is supported for writing firmware blocks to
the module.
Add EPL related parameters to the function ethtool_cmis_cdb_compose_args()
and add a specific function for calculating the maximum allowable length
extension for EPL. Both will be used in the next patch to add support for
writing firmware blocks using EPL.
Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Changes since v6:
- fix some typos in the document for SKB_DROP_REASON_TUNNEL_TXINFO
Changes since v5:
- fix some typos in the document for SKB_DROP_REASON_TUNNEL_TXINFO
Changes since v4:
- make skb_vlan_inet_prepare() return drop reasons, instead of introduce
a wrapper for it in the 3rd patch.
- modify the document for SKB_DROP_REASON_LOCAL_MAC and
SKB_DROP_REASON_TUNNEL_TXINFO.
Changes since v3:
- rename SKB_DROP_REASON_VXLAN_INVALID_SMAC to
SKB_DROP_REASON_MAC_INVALID_SOURCE in the 6th patch
Changes since v2:
- move all the drop reasons of VXLAN to the "core", instead of introducing
the VXLAN drop reason subsystem
- add the 6th patch, which capture the drop reasons from vxlan_snoop()
- move the commits for vxlan_remcsum() and vxlan_set_mac() after
vxlan_rcv() to update the call of them accordingly
- fix some format problems
Changes since v1:
- document all the drop reasons that we introduce
- rename the drop reasons to make them more descriptive, as Ido advised
- remove the 2nd patch, which introduce the SKB_DR_RESET
- add the 4th patch, which adds skb_vlan_inet_prepare_reason() helper
- introduce the 6th patch, which make vxlan_set_mac return drop reasons
- introduce the 10th patch, which uses VXLAN_DROP_NO_REMOTE as the drop
reasons, as Ido advised
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Wed, 9 Oct 2024 02:28:30 +0000 (10:28 +0800)]
net: vxlan: use kfree_skb_reason() in encap_bypass_if_local()
Replace kfree_skb() with kfree_skb_reason() in encap_bypass_if_local, and
no new skb drop reason is added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Wed, 9 Oct 2024 02:28:29 +0000 (10:28 +0800)]
net: vxlan: use kfree_skb_reason() in vxlan_encap_bypass()
Replace kfree_skb with kfree_skb_reason in vxlan_encap_bypass, and no new
skb drop reason is added in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Wed, 9 Oct 2024 02:28:28 +0000 (10:28 +0800)]
net: vxlan: use kfree_skb_reason() in vxlan_mdb_xmit()
Replace kfree_skb() with kfree_skb_reason() in vxlan_mdb_xmit. No drop
reasons are introduced in this commit.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Wed, 9 Oct 2024 02:28:27 +0000 (10:28 +0800)]
net: vxlan: add drop reasons support to vxlan_xmit_one()
Replace kfree_skb/dev_kfree_skb with kfree_skb_reason in vxlan_xmit_one.
No drop reasons are introduced in this commit.
The only concern of mine is replacing dev_kfree_skb with
kfree_skb_reason. The dev_kfree_skb is equal to consume_skb, and I'm not
sure if we can change it to kfree_skb here. In my option, the skb is
"dropped" here, isn't it?
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Wed, 9 Oct 2024 02:28:26 +0000 (10:28 +0800)]
net: vxlan: use kfree_skb_reason() in vxlan_xmit()
Replace kfree_skb() with kfree_skb_reason() in vxlan_xmit(). Following
new skb drop reasons are introduced for vxlan:
/* no remote found for xmit */
SKB_DROP_REASON_VXLAN_NO_REMOTE
/* packet without necessary metadata reached a device which is
* in "external" mode
*/
SKB_DROP_REASON_TUNNEL_TXINFO
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong [Wed, 9 Oct 2024 02:28:25 +0000 (10:28 +0800)]
net: vxlan: make vxlan_set_mac() return drop reasons
Change the return type of vxlan_set_mac() from bool to enum
skb_drop_reason. In this commit, the drop reason
"SKB_DROP_REASON_LOCAL_MAC" is introduced for the case that the source
mac of the packet is a local mac.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / thirdparty / linux.git / log
