Andrew Waterman [Thu, 22 Dec 2016 02:05:28 +0000 (18:05 -0800)]
RISC-V/GAS: Support more relocs against constant addresses
Previously, some pseudoinstructions like "call" only accepted
symbolic addresses and rejected constant addresses with an
esoteric internal error. This patch enables them by deferring
application of constant relocations to md_apply_fix, rather than
eagerly applying them during instruction assembly.
gas/ChangeLog
2017-01-09 Andrew Waterman <andrew@sifive.com>
* config/tc-riscv.c (append_insn): Don't eagerly apply relocations
against constants.
(md_apply_fix): Mark relocations against constants as "done."
Palmer Dabbelt [Fri, 30 Dec 2016 01:29:53 +0000 (17:29 -0800)]
Remove some custom sections from RISC-V's default linker scripts
This was added so compressed loads could have smaller offsets for
accessing the data section, but the result was that writable sections
ended up in INITIAL_READONLY_SECTIONS. This is a bad idea. The fix is
to just remove this micro-optimization.
Thanks to Alan Morda for finding the problem!
ld/ChangeLog
2017-01-09 Palmer Dabbelt <palmer@dabbelt.com>
Kito Cheng <kito.cheng@gmail.com>
Also generate unwind info for the .plt.bnd section. Sine it is the same
as unwind info for the .plt.got section, we use unwind info for the
.plt.got section to cover the the .plt.bnd section.
bfd/
2017-01-13 H.J. Lu <hongjiu.lu@intel.com>
Backport from master
2017-01-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/21038
* elf64-x86-64.c (elf_x86_64_link_hash_table): Add
plt_bnd_eh_frame.
(elf_x86_64_check_relocs): Create .eh_frame section for the
.plt.bnd section.
(elf_x86_64_size_dynamic_sections): Allocate and initialize
.eh_frame section for the .plt.bnd section.
(elf_x86_64_finish_dynamic_sections): Adjust .eh_frame section
for the .plt.bnd section.
2017-01-11 H.J. Lu <hongjiu.lu@intel.com>
PR ld/21038
* elf64-x86-64.c (elf_x86_64_eh_frame_bnd_plt): New.
(elf_x86_64_bnd_arch_bed): Use elf_x86_64_eh_frame_bnd_plt and
elf_x86_64_eh_frame_plt_got.
(elf_x86_64_size_dynamic_sections): Get unwind info from
elf_x86_64_bnd_arch_bed for the BND PLT.
ld/
2017-01-13 H.J. Lu <hongjiu.lu@intel.com>
Backport from master
2017-01-12 H.J. Lu <hongjiu.lu@intel.com>
PR ld/21038
* testsuite/ld-x86-64/pr21038b.d: Updated.
* testsuite/ld-x86-64/pr21038c.d: New file.
* testsuite/ld-x86-64/pr21038c.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr21038c.
2017-01-11 H.J. Lu <hongjiu.lu@intel.com>
PR ld/21038
* testsuite/ld-x86-64/pr21038a.d: New file.
* testsuite/ld-x86-64/pr21038a.s: Likewise.
* testsuite/ld-x86-64/pr21038b.d: Likewise.
* testsuite/ld-x86-64/pr21038b.s: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr21038a and pr21038b.
H.J. Lu [Tue, 10 Jan 2017 21:31:59 +0000 (13:31 -0800)]
i386/x86-64: Add unwind info for .plt.got section
When there are both PLT and GOT references to the same function symbol,
linker combines GOTPLT and GOT slots into a single GOT slot and create
an entry in .plt.got section for PLT access via the GOT slot. This
patch adds unwind info for .plt.got section and places .plt.got section
after .plt section for x32. .eh_frame section covering PLT sections
should be aligned to 4 bytes for i386 and x32.
bfd/
2017-01-13 H.J. Lu <hongjiu.lu@intel.com>
Backport from master
2017-01-10 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_check_relocs): Align .eh_frame section
to 4 bytes.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Align
.eh_frame section to 4 bytes for x32.
(elf_x86_64_check_relocs): Likewise.
2017-01-10 H.J. Lu <hongjiu.lu@intel.com>
PR ld/20830
* elf32-i386.c (elf_i386_eh_frame_plt_got): New.
(PLT_GOT_FDE_LENGTH): Likewise.
(elf_i386_plt_layout): Add eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_i386_plt): Updated.
(elf_i386_link_hash_table): Add plt_got_eh_frame.
(elf_i386_check_relocs): Create .eh_frame section for .plt.got.
(elf_i386_size_dynamic_sections): Allocate and initialize
.eh_frame section for .plt.got.
(elf_i386_finish_dynamic_sections): Adjust .eh_frame section for
.plt.got.
(elf_i386_nacl_plt): Add FIXME for eh_frame_plt_got and
eh_frame_plt_got_size.
* elf64-x86-64.c (elf_x86_64_eh_frame_plt_got): New.
(PLT_GOT_FDE_LENGTH): Likewise.
(elf_x86_64_backend_data): Add eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_x86_64_arch_bed): Updated.
(elf_x86_64_bnd_arch_bed): Add FIXME for eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_x86_64_nacl_arch_bed): Likewise.
(elf_x86_64_link_hash_table): Add plt_got_eh_frame.
(elf_x86_64_check_relocs): Create .eh_frame section for .plt.got.
(elf_x86_64_size_dynamic_sections): Allocate and initialize
.eh_frame section for .plt.got.
(elf_x86_64_finish_dynamic_sections): Adjust .eh_frame section
for .plt.got.
ld/
2017-01-13 H.J. Lu <hongjiu.lu@intel.com>
Backport from master
2017-01-10 H.J. Lu <hongjiu.lu@intel.com>
* testsuite/ld-x86-64/pr20830b.d: Updated.
2017-01-10 H.J. Lu <hongjiu.lu@intel.com>
* emulparams/elf32_x86_64.sh (TINY_READONLY_SECTION): New.
* testsuite/ld-x86-64/pr20830.d: Renamed to ...
* testsuite/ld-x86-64/pr20830a.d: This. Updated.
* testsuite/ld-x86-64/pr20830b.d: New file.
* testsuite/ld-x86-64/x86-64.exp: Rename pr20830 to pr20830a.
Run pr20830b.
Nick Clifton [Fri, 13 Jan 2017 09:32:22 +0000 (09:32 +0000)]
Add support for finding separate debug info files via the build-id method.
PR binutils/20876
bfd * opncls.c (find_separate_debug_file): Add include_dirs
parameter. Only include the directory part of the bfd's filename
in search paths if include_dirs is true. Add a couple of extra
locations for looking for debug files.
( bfd_follow_gnu_debuglink): Update invocation of
find_separate_debug_file.
(bfd_follow_gnu_debugaltlink): Likewise.
(get_build_id): New function: Finds the build-id of the given bfd.
(get_build_id_name): New function: Computes the name of the
separate debug info file for a bfd, based upon its build-id.
(check_build_id_file): New function: Checks to see if a separate
debug info file exists at the given location, and that its
build-id matches that of the original bfd.
(bfd_follow_build_id_debuglink): New function: Finds a separate
debug info file for a given bfd by using the build-id method.
* dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id
method of locating a separate debug info file before using the
debuglink method.
* bfd-in2.h: Regenerate.
binutils* NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_build_id_debuglink):
New proc to test the location of separate debug info files using
the build-id method.
Alan Modra [Tue, 10 Jan 2017 21:11:53 +0000 (07:41 +1030)]
[GOLD] PowerPC64 TOC indirect to TOC relative code editing
Doesn't yet trim off the unused TOC entries.
* powerpc.cc (class Powerpc_copy_relocs): New.
(Powerpc_copy_relocs::emit): New function.
(Powerpc_relobj::relatoc_, toc_, no_toc_opt_): New variables.
(Powerpc_relobj::toc_shndx, set_no_toc_opt, no_toc_opt): New inlines.
(Powerpc_relobj::do_relocate_sections): New function.
(Powerpc_relobj::make_toc_relative): Likewise.
(Powerpc_relobj::do_find_special_sections): Stash away .rela.toc
and .toc too.
(ok_lo_toc_insn): Move earlier, and handle more insns.
(Target_powerpc::Scan::local): If optimizing toc accesses, set
no_toc_opt for entries we can't edit. Check insn validity.
Emit "toc optimization is not supported" warning, downgraded
from error.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Edit TOC indirect code
to TOC relative. Don't emit "toc optimization is not supported"
error here.
Alan Modra [Mon, 9 Jan 2017 23:58:20 +0000 (10:28 +1030)]
[GOLD] Fix tests for powerpc64
PowerPC64 defines .TOC. rather than _GLOBAL_OFFSET_TABLE_, and
what's more, doesn't define it at all unless referenced. For ELFv1
ABI the symbol isn't normally referenced, so modify the test to accept
.TOC. as a variant of _GLOBAL_OFFSET_TABLE_ and 0 or 1 occurrences.
copy_test_relro as written doesn't need copy relocs on PowerPC64.
PowerPC64 is always PIC. So, modify copy_test_relro to test that the
existing vars are in fact read-only directly by deliberately causing a
sigsegv, and add another couple of vars that do cause copy relocs even
when PIC.
* testsuite/ver_test_8.sh: Accept .TOC. in lieu of
_GLOBAL_OFFSET_TABLE_. Allow zero count.
* testsuite/copy_test_relro_1.cc (c, q): New vars.
* testsuite/copy_test_relro.cc: Rewrite to test read-only
status of variables directly. Reference new vars in
read-only data.
Alan Modra [Mon, 9 Jan 2017 23:54:09 +0000 (10:24 +1030)]
[GOLD] Add --secure-plt option for ppc32
Added just to accept, and ignore. gcc since 2015-10-21, when
configured with --enable-secureplt passes this option to the linker.
As powerpc gold cannot link --bss-plt code successfully, gold needs to
accept the option or the gcc specs file needs to be changed.
The patch also make gold detect --bss-plt code and error out rather
than producing a binary that crashes.
* options.h: Add --secure-plt option.
* powerpc.cc (Target_powerpc::Scan::local): Detect and error
on -fPIC -mbss-plt code.
(Target_powerpc::Scan::global): Likewise.
Alan Modra [Fri, 6 Jan 2017 05:17:33 +0000 (15:47 +1030)]
[GOLD] powerpc.cc tidies
Plus some paranoia in symval_for_branch. We shouldn't get there with
dynamic symbols, but if we ever did the static_cast to Powerpc_relobj
would be wrong.
* powerpc.cc: Use shorter equivalent elfcpp typedef for
Reltype and reloc_size throughout.
(Target_powerpc::symval_for_branch): Exclude dynamic symbols.
(Target_powerpc::Scan::local): Use local var r_sym.
(Target_powerpc::Scan::global: Likewise.
(Target_powerpc::Relocate::relocate): Delete shadowing r_sym.
James Clarke [Tue, 3 Jan 2017 16:15:15 +0000 (16:15 +0000)]
bfd: alpha: Fix crash caused by double free with --no-keep-memory
Without this, ld has been seen to crash in libc when freeing tsec_free:
*** Error in `/usr/bin/ld': double free or corruption (!prev): 0x0000000120ceb6a0 ***
_bfd_elf_link_read_relocs will always return the cached value if
present, even if keep_memory is false, therefore setting tsec_free to
NULL only when keep_memory is true is not sufficient.
* elf64-alpha.c (elf64_alpha_relax_opt_call): Don't set tsec_free
if relocs are cached.
Alan Modra [Mon, 2 Jan 2017 11:36:28 +0000 (22:06 +1030)]
PR20989, sparc GOT sequence optimisation
PR ld/20989
* elfxx-sparc.c (gdop_relative_offset_ok): New function.
(_bfd_sparc_elf_relocate_section): Use it to validate GOT
indirect to GOT pointer relative code edit.
Alan Modra [Thu, 29 Dec 2016 12:19:41 +0000 (22:49 +1030)]
link_hash_copy_indirect and symbol flags
A while ago HJ fixed PR ld/18720 with commit 6e33951ed, which, among
other things, modified _bfd_elf_link_hash_copy_indirect to not copy
ref_dynamic, ref_regular, ref_regular_nonweak, non_got_ref, needs_plt
and pointer_equality_needed when setting up an indirect non-versioned
symbol pointing to a non-default versioned symbol. I didn't notice at
the time, but the pr18720 testcase fails on hppa-linux with
"internal error, aborting at binutils-gdb-2.28/bfd/elf32-hppa.c:3933
in elf32_hppa_relocate_section".
Now hppa-linux creates entries in the plt even for local functions, if
they are referenced using plabel (function pointer) relocations. So
needs_plt is set for foo when processing pr18720a.o. When the aliases
in pr28720b.o are processed, we get an indirection from foo to
foo@FOO, but don't copy needs_plt. Since foo@FOO is the "real" symbol
that is used after that point, no plt entry is made for foo and we
bomb when relocating the plabel.
As shown by the hppa-linux scenario, needs_plt should be copied even
for non-default versioned symbols. I believe all of the others ought
to be copied too, with the exception of ref_dynamic. Not copying
ref_dynamic is right because if a shared lib references "foo" it
should not be satisfied by any non-default version "foo@FOO".
* elflink.c (_bfd_elf_link_hash_copy_indirect): Only omit
copying one flag, ref_dynamic, when versioned_hidden.
* elf64-ppc.c (ppc64_elf_copy_indirect_symbol): Likewise.
* elf32-hppa.c (elf32_hppa_copy_indirect_symbol): Use same
logic for copying weakdef flags. Copy plabel flag and merge
tls_type.
* elf32-i386.c (elf_i386_copy_indirect_symbol): Use same logic
for copying weakdef flags.
* elf32-ppc.c (ppc_elf_copy_indirect_symbol): Likewise.
* elf32-s390.c (elf_s390_copy_indirect_symbol): Likewise.
* elf32-sh.c (sh_elf_copy_indirect_symbol): Likewise.
* elf64-s390.c (elf_s390_copy_indirect_symbol): Likewise.
* elfnn-ia64.c (elfNN_ia64_hash_copy_indirect): Likewise.
* elf64-x86-64.c (elf_x86_64_copy_indirect_symbol): Likewise.
Simplify.
Alan Modra [Wed, 28 Dec 2016 06:34:15 +0000 (17:04 +1030)]
Use dynrelro for symbols in relro sections too
PR ld/20995
bfd/
* elflink.c (elf_link_add_object_symbols): Mark relro sections
in dynamic objects SEC_READONLY.
ld/
* testsuite/ld-elf/pr20995c.s: New test file.
* testsuite/ld-elf/pr20995-2so.r: Likewise.
* testsuite/ld-elf/elf.exp: Run it.
Cary Coutant [Wed, 28 Dec 2016 04:50:47 +0000 (20:50 -0800)]
Place copy relocations in .dynbss when target is read-only.
gold/
PR ld/20995
* copy-relocs.cc (Copy_relocs::make_copy_reloc): Use .dynbss for
read-only data when linking with -z relro.
* copy-relocs.h (Copy_relocs::dynrelro_): New data member.
* testsuite/Makefile.am (copy_test_relro): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/copy_test_relro.cc: New source file.
* testsuite/copy_test_relro_1.cc: New source file.
Alan Modra [Sun, 25 Dec 2016 14:00:45 +0000 (00:30 +1030)]
dynrelro section for read-only dynamic symbols copied into executable
Variables defined in shared libraries are copied into an executable's
.bss section when code in the executable is non-PIC and thus would
require dynamic text relocations to access the variable directly in
the shared library. Recent x86 toolchains also copy variables into
the executable to gain a small speed improvement.
The problem is that if the variable was originally read-only, the copy
in .bss is writable, potentially opening a security hole. This patch
cures that problem by putting the copy in a section that becomes
read-only after ld.so relocation, provided -z relro is in force.
The patch also fixes a microblaze linker segfault on attempting to
use dynamic bss variables.
bfd/
PR ld/20995
* elf-bfd.h (struct elf_link_hash_table): Add sdynrelro and
sreldynrelro.
(struct elf_backend_data): Add want_dynrelro.
* elfxx-target.h (elf_backend_want_dynrelro): Define.
(elfNN_bed): Update initializer.
* elflink.c (_bfd_elf_create_dynamic_sections): Create
sdynrelro and sreldynrelro sections.
* elf32-arm.c (elf32_arm_adjust_dynamic_symbol): Place variables
copied into the executable from read-only sections into sdynrelro.
(elf32_arm_size_dynamic_sections): Handle sdynrelro.
(elf32_arm_finish_dynamic_symbol): Select sreldynrelro for
dynamic relocs in sdynrelro.
(elf_backend_want_dynrelro): Define.
* elf32-hppa.c (elf32_hppa_adjust_dynamic_symbol)
(elf32_hppa_size_dynamic_sections, elf32_hppa_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-i386.c (elf_i386_adjust_dynamic_symbol)
(elf_i386_size_dynamic_sections, elf_i386_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-metag.c (elf_metag_adjust_dynamic_symbol)
(elf_metag_size_dynamic_sections, elf_metag_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol)
(microblaze_elf_size_dynamic_sections)
(microblaze_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-nios2.c (nios2_elf32_finish_dynamic_symbol)
(nios2_elf32_adjust_dynamic_symbol)
(nios2_elf32_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-or1k.c (or1k_elf_finish_dynamic_symbol)
(or1k_elf_adjust_dynamic_symbol, or1k_elf_size_dynamic_sections)
(elf_backend_want_dynrelro): As above.
* elf32-ppc.c (ppc_elf_adjust_dynamic_symbol)
(ppc_elf_size_dynamic_sections, ppc_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tic6x.c (elf32_tic6x_adjust_dynamic_symbol)
(elf32_tic6x_size_dynamic_sections)
(elf32_tic6x_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf32-tilepro.c (tilepro_elf_adjust_dynamic_symbol)
(tilepro_elf_size_dynamic_sections)
(tilepro_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-ppc.c (ppc64_elf_adjust_dynamic_symbol)
(ppc64_elf_size_dynamic_sections, ppc64_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-s390.c (elf_s390_adjust_dynamic_symbol)
(elf_s390_size_dynamic_sections, elf_s390_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elf64-x86-64.c (elf_x86_64_adjust_dynamic_symbol)
(elf_x86_64_size_dynamic_sections)
(elf_x86_64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-aarch64.c (elfNN_aarch64_adjust_dynamic_symbol)
(elfNN_aarch64_size_dynamic_sections)
(elfNN_aarch64_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfnn-riscv.c (riscv_elf_adjust_dynamic_symbol)
(riscv_elf_size_dynamic_sections, riscv_elf_finish_dynamic_symbol)
(elf_backend_want_dynrelro): As above.
* elfxx-mips.c (_bfd_mips_elf_adjust_dynamic_symbol)
(_bfd_mips_elf_size_dynamic_sections)
(_bfd_mips_vxworks_finish_dynamic_symbol): As above.
* elfxx-sparc.c (_bfd_sparc_elf_adjust_dynamic_symbol)
(_bfd_sparc_elf_size_dynamic_sections)
(_bfd_sparc_elf_finish_dynamic_symbol): As above.
* elfxx-tilegx.c (tilegx_elf_adjust_dynamic_symbol)
(tilegx_elf_size_dynamic_sections)
(tilegx_elf_finish_dynamic_symbol): As above.
* elf32-mips.c (elf_backend_want_dynrelro): Define.
* elf64-mips.c (elf_backend_want_dynrelro): Define.
* elf32-sparc.c (elf_backend_want_dynrelro): Define.
* elf64-sparc.c (elf_backend_want_dynrelro): Define.
* elf32-tilegx.c (elf_backend_want_dynrelro): Define.
* elf64-tilegx.c (elf_backend_want_dynrelro): Define.
* elf32-microblaze.c (microblaze_elf_adjust_dynamic_symbol): Tidy.
(microblaze_elf_size_dynamic_sections): Handle sdynbss.
* elf32-nios2.c (nios2_elf32_size_dynamic_sections): Make use
of linker shortcuts to dynamic sections rather than comparing
names. Correctly set "got" flag.
ld/
PR ld/20995
* testsuite/ld-arm/farcall-mixed-app-v5.d: Update to suit changed
stub hash table traversal caused by section id increment. Accept
the previous output too.
* testsuite/ld-arm/farcall-mixed-app.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib-v4t.d: Likewise.
* testsuite/ld-arm/farcall-mixed-lib.d: Likewise.
* testsuite/ld-elf/pr20995a.s, * testsuite/ld-elf/pr20995b.s,
* testsuite/ld-elf/pr20995.r: New test.
* testsuite/ld-elf/elf.exp: Run it.
* elf32-arc.c (arc_elf_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf32-microblaze.c (microblaze_elf_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf32-or1k.c (or1k_elf_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf32-s390.c (elf_s390_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf64-ppc.c (ppc64_elf_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
* elf64-s390.c (elf_s390_create_dynamic_sections): Delete.
(elf_backend_create_dynamic_sections): Use base ELF version.
MIPS/BFD: Remove EI_ABIVERSION 5 allocation for PT_GNU_STACK support
Revert commit 17733f5be961 ("Increment the ABIVERSION to 5 for MIPS
objects with non-executable stacks.") and remove EI_ABIVERSION 5
allocation for PT_GNU_STACK support, which has not made it to glibc
and will be reassigned.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Simplify extended operand handling and only specially process immediates
which require bit shuffling, using the generic operand insertion and
extraction handlers for the '<' (5-bit shift amount) operand code in
particular. Require the least significant bit of all extended operand
forms to be (artificially) set to 0 for their special processing to
trigger.
gas/
* config/tc-mips.c (mips16_immed): Limit `mips16_immed_extend'
use to operands whose LSB position is zero.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Simplify processing of
extended operands.
* mips16-opc.c (decode_mips16_operand): Switch the extended
form of the `<' operand type to LSB position 22.
MIPS16/GAS: Clean up invalid unextended operand handling
Bail out right away when an unextended instruction encoding is required
either with the use of a `.t' suffix or by means of `.set noautoextend',
however an operand supplied requires the extended instruction form to be
used.
This is to avoid messing up with the internal state of the assembler,
even though no actual failures are known to happen as a result. Add
test cases for the situation concerned.
gas/
* config/tc-mips.c (match_mips16_insn): Don't update
`forced_insn_length' or the instruction opcode if an operand
requires an extended instruction form, but an unextended one
has been requested.
* testsuite/gas/mips/mips16-relax-unextended-1.d: New test.
* testsuite/gas/mips/mips16-relax-unextended-2.d: New test.
* testsuite/gas/mips/mips16-relax-unextended-1.l: New stderr
output.
* testsuite/gas/mips/mips16-relax-unextended-2.l: New stderr
output.
* testsuite/gas/mips/mips16-relax-unextended-1.s: New test
source.
* testsuite/gas/mips/mips16-relax-unextended-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Remove special casing for the `6' operand code used for the embedded
trap code of the BREAK and the SDBBP instructions to support supposedly
extended forms of these instructions.
According to all versions of the MIPS16 ASE specifications these
instructions are not extensible [1][2][3][4][5][7][8][10][11], and as
from revision 2.50 of the MIPS16e ASE specifications it has been further
clarified what was previously implied, that non-extesiable instructions
when preceded with an EXTEND prefix must cause a Reserved Instruction
exception [5][6][9][10].
Therefore supposedly extended BREAK and SDBBP instructions do not serve
their purpose anymore as they do not cause a Bp and a Debug exception
respectively and supporting these forms in disassembly only causes
confusion.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] same, Table 18. "Extendable MIPS16 Instructions", p. 24
[4] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Table 3.8 "MIPS16e Special Instructions", p. 38
[5] same, Section 3.11 "MIPS16e Extensible Instructions, p. 41
[6] same, Table 3.15 "MIPS16e Extensible Instructions", p. 41
[7] same, Table 3.24 "MIPS16e RR Encoding of the Funct Field", p. 49
[8] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Table 1.8 "MIPS16e Special Instructions", p. 39
[9] same, Section 1.11 "MIPS16e Extensible Instructions", p. 42
[10] same, Table 1.15 "MIPS16e Extensible Instructions", pp. 42-43
[11] same, Table 1.24 "MIPS16e RR Encoding of the Funct Field", p. 50
gas/
* config/tc-mips.c (match_mips16_insn): Remove the `6' operand
code special case and its associated comment.
MIPS16/GAS: Fix forced size suffixes with argumentless instructions
Correct the handling of `.e' and `.t' instruction size suffixes with
instruction mnemonics which are not followed by any text on the same
line, such as arguments or white space, e.g.:
gas/
* config/tc-mips.c (mips16_ip): Handle `.e' and `.t' instruction
suffixes followed by a null character rather than a space too.
* testsuite/gas/mips/mips16-insn-length-noargs.d: New test.
* testsuite/gas/mips/mips16-insn-length-noargs.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new test.
Do not allow any explicitly coded EXTEND instruction to be automatically
scheduled into a jump delay slot, as an EXTEND prefix is coupled with
the next regular MIPS16 instruction and therefore swapping it with a
jump would change program's semantics; EXTEND is not architecturally
allowed to be present in a jump delay slot anyway.
opcodes/
* mips16-opc.c (mips16_opcodes): Set NODS in `pinfo' for
"extend".
gas/
* testsuite/gas/mips/mips16-extend-swap.d: New test.
* testsuite/gas/mips/mips16-extend-swap.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new test.
opcodes: Use autoconf to check for `bfd_mips_elf_get_abiflags' in BFD
Fix a regression introduced with commit 5e7fc731f80e ("MIPS/opcodes:
Also set disassembler's ASE flags from ELF structures"), further updated
with commit 4df995c77118 ("MIPS/opcodes: Also set disassembler's ASE
flags from ELF structures"), and use autoconf to check for the presence
of `bfd_mips_elf_get_abiflags' in BFD.
opcodes/
* mips-dis.c (set_default_mips_dis_options): Use
HAVE_BFD_MIPS_ELF_GET_ABIFLAGS rather than BFD64 to guard the
call to `bfd_mips_elf_get_abiflags'.
* configure.ac: Check for `bfd_mips_elf_get_abiflags' in BFD.
* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add `libbfd.la'.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* config.in: Regenerate.
* Makefile.in: Regenerate.
Alan Modra [Thu, 22 Dec 2016 02:42:07 +0000 (13:12 +1030)]
hppa-linux-gnu-ranlib: libcpp.a: File format not recognized
This stops an --enable-targets selection affecting the main target in
regards to forcing 64-bit archives. It also means mips64 and s390x
will revert to binutils-2.25 and binutils-2.26 behaviour of not
forcing 64-bit archives at least in the common case when plugins were
enabled.
Cary Coutant [Sat, 17 Dec 2016 03:17:38 +0000 (19:17 -0800)]
Add -z bndplt support (for Intel MPX).
gold/
PR gold/17643
* options.h (-z bndplt): New option.
* x86_64.cc (Output_data_plt_x86_64::regular_count): New method.
(Output_data_plt_x86_64::address_for_global): Move implementation into
virtual method.
(Output_data_plt_x86_64::address_for_local): Likewise.
(Output_data_plt_x86_64::got): New method.
(Output_data_plt_x86_64::got_plt): New method.
(Output_data_plt_x86_64::got_irelative): New method.
(Output_data_plt_x86_64::do_address_for_global): New virtual method.
(Output_data_plt_x86_64::do_address_for_local): New virtual method.
(class Output_data_plt_x86_64_bnd): New class.
(Target_x86_64::do_make_data_plt): Move out of line and specialize
for each size (both overloads).
(Output_data_plt_x86_64::set_final_data_size): Cosmetic changes.
* testsuite/Makefile.am (bnd_plt_1): New test case.
(bnd_ifunc_1): New test case.
(bnd_ifunc_2): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/bnd_ifunc_1.s: New source file.
* testsuite/bnd_ifunc_1.sh: New shell script.
* testsuite/bnd_ifunc_2.s: New source file.
* testsuite/bnd_ifunc_2.sh: New shell script.
* testsuite/bnd_plt_1.s: New source file.
* testsuite/bnd_plt_1.sh: New shell script.
Cary Coutant [Thu, 22 Dec 2016 22:06:24 +0000 (14:06 -0800)]
Fix placement of forced local symbols in the dynamic symbol table.
Gold was not placing forced-local symbols (e.g., hidden visibility)
at the front of the dynamic symbol table, or including them in the
count of local symbols recorded in the .dynsym section's sh_info field.
gold/
* layout.cc (Layout::finalize): Track count of forced-local symbols
in .dynsym.
(Layout::create_symtab_sections): Add local_dynamic_count parameter;
use that instead of sh_info value.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter; pass it to Symtab::set_dynsym_indexes(). Include forced
locals in sh_info value. Pass index of first real global to
Dynobj::create_gnu_hash_table() and Dynobj::create_elf_hash_table().
* layout.h (Layout::create_symtab_sections): Add local_dynamic_count
parameter.
(Layout::create_dynamic_symtab): Add pforced_local_dynamic_count
parameter.
* symtab.cc (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter. Process forced-local symbols first and return the count.
(Symbol_table::finalize): Update comments.
* symtab.h (Symbol_table::set_dynsym_indexes): Add pforced_local_count
parameter.
(Symbol_table::first_dynamic_global_index_): Update comment.
(Symbol_table::dynamic_count_): Update comment.
* testsuite/Makefile.am (ifuncmod1.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* testsuite/ifuncmod1.sh: New shell script.
Cary Coutant [Thu, 22 Dec 2016 01:32:39 +0000 (17:32 -0800)]
Fix problem where version script causes predefined hidden symbol to be defined twice.
When creating a predefined hidden symbol like _GLOBAL_OFFSET_TABLE_, gold
was incorrectly letting a version script add a version to the symbol,
resulting in two copies of the symbol, both STB_LOCAL, but one of which
was grouped in the globals part of the symbol table.
gold/
* symtab.cc (Symbol_table::define_special_symbol): Add is_forced_local
parameter; if set, do not check version script.
(Symbol_table::do_define_in_output_data): Pass is_forced_local for
STB_LOCAL predefined symbols.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_in_output_segment): Likewise.
(Symbol_table::do_define_as_constant): Likewise.
* symtab.h (Symbol_table::define_special_symbol): Add is_forced_local
parameter. Adjust all callers.
* testsuite/Makefile.am (ver_test_8.sh): New test case.
* testsuite/Makefile.in: Regenerate.
* ver_test_8.sh: New test script.
Simon Marchi [Thu, 22 Dec 2016 21:17:31 +0000 (16:17 -0500)]
Class-ify ui_out
This patch finalizes the C++ conversion of the ui-out subsystem, by
turning the ui_out and ui_out_impl structures into a single class
hierarchy. ui_out functions are turned into virtual methods of that new
class, so as a result there are a lot of call sites to update.
In the previous version of the patchset, there were separate ui_out and
ui_out_impl classes, but it wasn't really useful and added boilerplate.
In this version there is simply an ui_out base class that is
extended for CLI, TUI and MI.
It's a bit hard to maintain a ChangeLog for such a big patch, I did my
best but I'm sure there are some missing or outdated info in there...
gdb/ChangeLog:
* ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header,
ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int,
ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream,
ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text,
ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags,
ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect):
Remove, replace with a method in class ui_out.
(table_begin_ftype): Remove, replace with pure virtual method in
class ui_out.
(table_body_ftype): Likewise.
(table_end_ftype): Likewise.
(table_header_ftype): Likewise.
(ui_out_begin_ftype): Likewise.
(ui_out_end_ftype): Likewise.
(field_int_ftype): Likewise.
(field_skip_ftype): Likewise.
(field_string_ftype): Likewise.
(field_fmt_ftype): Likewise.
(spaces_ftype): Likewise.
(text_ftype): Likewise.
(message_ftype): Likewise.
(wrap_hint_ftype): Likewise.
(flush_ftype): Likewise.
(redirect_ftype): Likewise.
(data_destroy_ftype): Likewise.
(struct ui_out_impl): Remove, replace with class ui_out.
(ui_out_new): Remove.
(class ui_out): New class.
* ui-out.c (struct ui_out): Remove, replaced with class ui_out.
(current_level): Remove, replace with ui_out method.
(push_level): Likewise.
(pop_level): Likewise.
(uo_table_begin, uo_table_body, uo_table_end, uo_table_header,
uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt,
uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush,
uo_redirect, uo_field_string): Remove.
(ui_out_table_begin): Replace with ...
(ui_out::table_begin): ... this.
(ui_out_table_body): Replace with ...
(ui_out::table_body): ... this.
(ui_out_table_end): Replace with ...
(ui_out::table_end): ... this.
(ui_out_table_header): Replace with ...
(ui_out::table_header): ... this.
(ui_out_begin): Replace with ...
(ui_out::begin): ... this.
(ui_out_end): Replace with ...
(ui_out::end): ... this.
(ui_out_field_int): Replace with ...
(ui_out::field_int): ... this.
(ui_out_field_fmt_int): Replace with ...
(ui_out::field_fmt_int): ... this.
(ui_out_field_core_addr): Replace with ...
(ui_out::field_core_addr): ... this.
(ui_out_field_stream): Replace with ...
(ui_out::field_stream): ... this.
(ui_out_field_skip): Replace with ...
(ui_out::field_skip): ... this.
(ui_out_field_string): Replace with ...
(ui_out::field_string): ... this.
(ui_out_field_fmt): Replace with ...
(ui_out::field_fmt): ... this.
(ui_out_spaces): Replace with ...
(ui_out::spaces): ... this.
(ui_out_text): Replace with ...
(ui_out::text): ... this.
(ui_out_message): Replace with ...
(ui_out::message): ... this.
(ui_out_wrap_hint): Replace with ...
(ui_out::wrap_hint): ... this.
(ui_out_flush): Replace with ...
(ui_out::flush): ... this.
(ui_out_redirect): Replace with ...
(ui_out::redirect): ... this.
(ui_out_test_flags): Replace with ...
(ui_out::test_flags): ... this.
(ui_out_is_mi_like_p): Replace with ...
(ui_out::is_mi_like_p): ... this.
(verify_field): Replace with ...
(ui_out::verify_field): ... this.
(ui_out_query_field): Replace with ...
(ui_out::query_table_field): ... this.
(ui_out_data): Remove.
(ui_out_new): Remove, replace with ...
(ui_out::ui_out): ... this constructor.
(do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end,
do_cleanup_end, make_cleanup_ui_out_tuple_begin_end,
make_cleanup_ui_out_list_begin_end): Update fallouts of struct
ui_out -> class ui_out change.
* cli-out.c (cli_out_data): Remove.
(cli_uiout_dtor): Remove.
(cli_table_begin): Replace with ...
(cli_ui_out::do_table_begin): ... this new method.
(cli_table_body): Replace with ...
(cli_ui_out::do_table_body): ... this new method.
(cli_table_end): Replace with ...
(cli_ui_out::do_table_end): ... this new method.
(cli_table_header): Replace with ...
(cli_ui_out::do_table_header): ... this new method.
(cli_begin): Replace with ...
(cli_ui_out::do_begin): ... this new method.
(cli_end): Replace with ...
(cli_ui_out::do_end): ... this new method.
(cli_field_int): Replace with ...
(cli_ui_out::do_field_int): ... this new method.
(cli_field_skip): Replace with ...
(cli_ui_out::do_field_skip): ... this new method.
(cli_field_string): Replace with ...
(cli_ui_out::do_field_string): ... this new method.
(cli_field_fmt): Replace with ...
(cli_ui_out::do_field_fmt): ... this new method.
(cli_spaces): Replace with ...
(cli_ui_out::do_spaces): ... this new method.
(cli_text): Replace with ...
(cli_ui_out::do_text): ... this new method.
(cli_message): Replace with ...
(cli_ui_out::do_message): ... this new method.
(cli_wrap_hint): Replace with ...
(cli_ui_out::do_wrap_hint): ... this new method.
(cli_flush): Replace with ...
(cli_ui_out::do_flush): ... this new method.
(cli_redirect): Replace with ...
(cli_ui_out::do_redirect): ... this new method.
(out_field_fmt): Replace with ...
(cli_ui_out::out_field_fmt): ... this new method.
(field_separator): Replace with ...
(cli_ui_out::field_separator): ... this new method.
(cli_out_set_stream): Replace with ...
(cli_ui_out::set_stream): ... this new method.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_ui_out_impl::cli_ui_out_impl): New constructor.
(cli_ui_out_impl::~cli_ui_out_impl): New destructor.
(cli_out_new): Change return type to cli_ui_out *, instantiate a
cli_ui_out.
* cli-out.h (cli_ui_out_data): Remove, replace with class
cli_ui_out.
(class cli_ui_out): New class.
(cli_ui_out_impl): Remove.
(cli_out_data_ctor): Remove.
(cli_out_new): Change return type to cli_ui_out*.
(cli_out_set_stream): Remove.
* cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type
to cli_ui_out*.
(cli_interpreter_resume): Adapt.
(cli_interpreter_exec): Adapt.
* mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove.
(mi_ui_out_impl): Remove.
(mi_table_begin): Replace with ...
(mi_ui_out::do_table_begin): ... this.
(mi_table_body): Replace with ...
(mi_ui_out::do_table_body): ... this.
(mi_table_end): Replace with ...
(mi_ui_out::do_table_end): ... this.
(mi_table_header): Replace with ...
(mi_ui_out::do_table_header): ... this.
(mi_begin): Replace with ...
(mi_ui_out::do_begin): ... this.
(mi_end): Replace with ...
(mi_ui_out::do_end): ... this.
(mi_field_int): Replace with ...
(mi_ui_out::do_field_int): ... this.
(mi_field_skip): Replace with ...
(mi_ui_out::do_field_skip): ... this.
(mi_field_string): Replace with ...
(mi_ui_out::do_field_string): ... this.
(mi_field_fmt): Replace with ...
(mi_ui_out::do_field_fmt): ... this.
(mi_spaces): Replace with ...
(mi_ui_out::do_spaces): ... this.
(mi_text): Replace with ...
(mi_ui_out::do_text): ... this.
(mi_message): Replace with ...
(mi_ui_out::do_message): ... this.
(mi_wrap_hint): Replace with ...
(mi_ui_out::do_wrap_hint): ... this.
(mi_flush): Replace with ...
(mi_ui_out::do_flush): ... this.
(mi_redirect): Replace with ...
(mi_ui_out::do_redirect):
(field_separator): Replace with ...
(mi_ui_out::field_separator):
(mi_open): Replace with ...
(mi_ui_out::open): ... this.
(mi_close): Replace with ...
(mi_ui_out::close): ... this.
(mi_out_rewind): Replace with ...
(mi_ui_out::rewind): ... this.
(mi_out_put): Replace with ...
(mi_ui_out::put): ... this.
(mi_version): Replace with ...
(mi_ui_out::version): ... this.
(mi_out_data_ctor): Replace with ...
(mi_ui_out::mi_ui_out): ... this.
(mi_out_data_dtor): Replace with ...
(mi_ui_out::~mi_ui_out): ... this.
(mi_out_new): Change return type to mi_ui_out*, instantiate
an mi_ui_out object.
(as_mi_ui_out): New function.
(mi_version): Update fallouts of struct ui_out to class ui_out
transition.
(mi_out_put): Likewise.
(mi_out_rewind): Likewise.
* mi/mi-out.h (mi_out_new): Change return type to mi_ui_out*.
* tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl):
Remove.
(tui_field_int): Replace with ...
(tui_ui_out::do_field_int): ... this.
(tui_field_string): Replace with ...
(tui_ui_out::do_field_string): ... this.
(tui_field_fmt): Replace with ...
(tui_ui_out::do_field_fmt): ... this.
(tui_text): Replace with ...
(tui_ui_out::do_text): ... this.
(tui_out_new): Change return type to tui_ui_out*, instantiate
tui_ui_out object.
(tui_ui_out::tui_ui_out): New.
* tui/tui-out.h: New file.
* tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h.
* tui/tui-io.c: Include tui/tui-out.h.
(tui_old_uiout): Change type to cli_ui_out*.
(tui_setup_io): Use dynamic_cast.
* tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out*.
* tui/tui-interp.c (tui_resume): Adapt.
* ada-lang.c (print_it_exception): Update fallouts of struct
ui_out to class ui_out transition.
(print_one_exception): Likewise.
(print_mention_exception): Likewise.
* ada-tasks.c (print_ada_task_info): Likewise.
(info_task): Likewise.
(task_command): Likewise.
* auto-load.c (print_script): Likewise.
(auto_load_info_scripts): Likewise.
(info_auto_load_cmd): Likewise.
* break-catch-sig.c (signal_catchpoint_print_one): Likewise.
* break-catch-syscall.c (print_it_catch_syscall): Likewise.
(print_one_catch_syscall): Likewise.
* break-catch-throw.c (print_it_exception_catchpoint): Likewise.
(print_one_exception_catchpoint): Likewise.
(print_one_detail_exception_catchpoint): Likewise.
(print_mention_exception_catchpoint): Likewise.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise.
(print_solib_event): Likewise.
(watchpoint_check): Likewise.
(wrap_indent_at_field): Likewise.
(print_breakpoint_location): Likewise.
(output_thread_groups): Likewise.
(print_one_breakpoint_location): Likewise.
(breakpoint_1): Likewise.
(default_collect_info): Likewise.
(watchpoints_info): Likewise.
(print_it_catch_fork): Likewise.
(print_one_catch_fork): Likewise.
(print_it_catch_vfork): Likewise.
(print_one_catch_vfork): Likewise.
(print_it_catch_solib): Likewise.
(print_one_catch_solib): Likewise.
(print_it_catch_exec): Likewise.
(print_one_catch_exec): Likewise.
(mention): Likewise.
(print_it_ranged_breakpoint): Likewise.
(print_one_ranged_breakpoint): Likewise.
(print_one_detail_ranged_breakpoint): Likewise.
(print_mention_ranged_breakpoint): Likewise.
(print_it_watchpoint): Likewise.
(print_mention_watchpoint): Likewise.
(print_it_masked_watchpoint): Likewise.
(print_one_detail_masked_watchpoint): Likewise.
(print_mention_masked_watchpoint): Likewise.
(bkpt_print_it): Likewise.
(tracepoint_print_one_detail): Likewise.
(tracepoint_print_mention): Likewise.
(update_static_tracepoint): Likewise.
(tracepoints_info): Likewise.
(save_breakpoints): Likewise.
* cli/cli-cmds.c (complete_command): Likewise.
* cli/cli-logging.c (set_logging_redirect): Likewise.
(pop_output_files): Likewise.
(handle_redirections): Likewise.
* cli/cli-script.c (print_command_lines): Likewise.
* cli/cli-setshow.c (do_show_command): Likewise.
(cmd_show_list): Likewise.
* cp-abi.c (list_cp_abis): Likewise.
(show_cp_abi_cmd): Likewise.
* darwin-nat-info.c (darwin_debug_regions_recurse): Likewise.
* disasm.c (gdb_pretty_print_insn): Likewise.
(do_mixed_source_and_assembly_deprecated): Likewise.
(do_mixed_source_and_assembly): Likewise.
* gdb_bfd.c (print_one_bfd): Likewise.
(maintenance_info_bfds): Likewise.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise.
* guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise.
* i386-tdep.c (i386_mpx_print_bounds): Likewise.
* infcmd.c (run_command_1): Likewise.
(print_return_value_1): Likewise.
* inferior.c (print_selected_inferior): Likewise.
(print_inferior): Likewise.
* infrun.c (print_end_stepping_range_reason): Likewise.
(print_signal_exited_reason): Likewise.
(print_exited_reason): Likewise.
(print_signal_received_reason): Likewise.
(print_no_history_reason): Likewise.
* interps.c (interp_set): Likewise.
* linespec.c (decode_line_full): Likewise.
* linux-thread-db.c (info_auto_load_libthread_db): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise.
(mi_cmd_env_path): Likewise.
(mi_cmd_env_dir): Likewise.
(mi_cmd_inferior_tty_show): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise.
(print_partial_file_name): Likewise.
(mi_cmd_file_list_exec_source_files): Likewise.
* mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise.
(mi_cmd_info_gdb_mi_command): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise.
(mi_cmd_stack_list_args): Likewise.
(list_arg_or_local): Likewise.
* mi/mi-cmd-var.c (print_varobj): Likewise.
(mi_cmd_var_create): Likewise.
(mi_cmd_var_delete): Likewise.
(mi_cmd_var_set_format): Likewise.
(mi_cmd_var_show_format): Likewise.
(mi_cmd_var_info_num_children): Likewise.
(mi_cmd_var_list_children): Likewise.
(mi_cmd_var_info_type): Likewise.
(mi_cmd_var_info_path_expression): Likewise.
(mi_cmd_var_info_expression): Likewise.
(mi_cmd_var_show_attributes): Likewise.
(mi_cmd_var_evaluate_expression): Likewise.
(mi_cmd_var_assign): Likewise.
(varobj_update_one): Likewise.
* mi/mi-interp.c (as_mi_interp): Likewise.
(mi_on_normal_stop_1): Likewise.
(mi_tsv_modified): Likewise.
(mi_breakpoint_created): Likewise.
(mi_breakpoint_modified): Likewise.
(mi_solib_loaded): Likewise.
(mi_solib_unloaded): Likewise.
(mi_command_param_changed): Likewise.
(mi_memory_changed): Likewise.
(mi_user_selected_context_changed): Likewise.
* mi/mi-main.c (print_one_inferior): Likewise.
(output_cores): Likewise.
(list_available_thread_groups): Likewise.
(mi_cmd_data_list_register_names): Likewise.
(mi_cmd_data_list_changed_registers): Likewise.
(output_register): Likewise.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_list_features): Likewise.
(mi_cmd_list_target_features): Likewise.
(mi_cmd_add_inferior): Likewise.
(mi_execute_command): Likewise.
(mi_load_progress): Likewise.
(print_variable_or_computed): Likewise.
(mi_cmd_trace_frame_collected): Likewise.
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise.
* osdata.c (info_osdata_command): Likewise.
* probe.c (gen_ui_out_table_header_info): Likewise.
(print_ui_out_not_applicables): Likewise.
(print_ui_out_info): Likewise.
(info_probes_for_ops): Likewise.
(enable_probes_command): Likewise.
(disable_probes_command): Likewise.
* progspace.c (print_program_space): Likewise.
* python/py-breakpoint.c (bppy_get_commands): Likewise.
* python/py-framefilter.c (py_print_type): Likewise.
(py_print_value): Likewise.
(py_print_single_arg): Likewise.
(enumerate_args): Likewise.
(enumerate_locals): Likewise.
(py_print_args): Likewise.
(py_print_frame): Likewise.
* record-btrace.c (btrace_ui_out_decode_error): Likewise.
(btrace_call_history_insn_range): Likewise.
(btrace_call_history_src_line): Likewise.
(btrace_call_history): Likewise.
* remote.c (show_remote_cmd): Likewise.
* skip.c (skip_info): Likewise.
* solib.c (info_sharedlibrary_command): Likewise.
* source.c (print_source_lines_base): Likewise.
* spu-tdep.c (info_spu_event_command): Likewise.
(info_spu_signal_command): Likewise.
(info_spu_mailbox_list): Likewise.
(info_spu_dma_cmdlist): Likewise.
(info_spu_dma_command): Likewise.
(info_spu_proxydma_command): Likewise.
* stack.c (print_stack_frame): Likewise.
(print_frame_arg): Likewise.
(read_frame_arg): Likewise.
(print_frame_args): Likewise.
(print_frame_info): Likewise.
(print_frame): Likewise.
* symfile.c (load_progress): Likewise.
(generic_load): Likewise.
(print_transfer_performance): Likewise.
* thread.c (do_captured_list_thread_ids): Likewise.
(print_thread_info_1): Likewise.
(restore_selected_frame): Likewise.
(do_captured_thread_select): Likewise.
(print_selected_thread_frame): Likewise.
* top.c (execute_command_to_string): Likewise.
* tracepoint.c (tvariables_info_1): Likewise.
(trace_status_mi): Likewise.
(tfind_1): Likewise.
(print_one_static_tracepoint_marker): Likewise.
(info_static_tracepoint_markers_command): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
(fputs_maybe_filtered): Likewise.
Cary Coutant [Thu, 22 Dec 2016 00:21:23 +0000 (16:21 -0800)]
Make linker-created symbols relocatable where appropriate.
Linker-created symbols like __ehdr_start, __etext, __edata, and end
should be relocatable, not absolute.
gold/
* output.cc (Output_segment::first_section): Return NULL if there are
no sections in the segment.
* output.h (Output_segment::first_section_load_address): Assert that
first section is not NULL.
* symtab.cc (Symbol_table::sized_write_globals): Attach linker-created
segment-relative symbols to first section of the segment.
Andrew Waterman [Tue, 20 Dec 2016 22:25:39 +0000 (14:25 -0800)]
Support aligning text section from odd addresses
Previously, the alignment directives were not correctly supported
in the text section when current alignment was only 1 byte (i.e.,
when the address was odd). Since there are no 1-byte instructions
in RISC-V, this patch resolves the bug by writing a zero byte to
obtain 2-byte alignment, at which point a 2-byte NOP can be used
to obtain 4-byte alignment.
Andrew Waterman [Tue, 20 Dec 2016 22:25:33 +0000 (14:25 -0800)]
Avoid creating symbol table entries for registers
Instructions like "jal t0, foo" were erroneously creating symbol table
entries for t0 as well as foo, which causes linking problems. Fix by
reordering instruction alternatives so that t0 is first attempted to
be parsed as a register, rather than as a symbol.
* riscv-opc.c (riscv_opcodes): Reorder jal and call entries.
Yury Norov [Fri, 9 Dec 2016 16:17:58 +0000 (21:47 +0530)]
bfd: aarch64: fix word and arrdess size declaration in ilp32 mode
ILP32 has 32-bit word and address, but currently they declared as 64-bit in
bfd_aarch64_arch_ilp32, which breaks further logic of bfd. This patch fixes it.
Glibc testsuite build with patched binutils shows that next tests stop to fail:
iconvdata/mtrace-tst-loading
iconvdata/tst-loading
iconvdata/tst-tables
localedata/mtrace-tst-leaks
localedata/tst-leaks
posix/tst-getaddrinfo4
posix/tst-getaddrinfo5
posix/tst-regex2
Alan Modra [Wed, 21 Dec 2016 08:43:52 +0000 (19:13 +1030)]
Remove high bit set characters
gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
Pedro Alves [Tue, 20 Dec 2016 15:46:44 +0000 (15:46 +0000)]
Fix longjmp across readline w/ --enable-sjlj-exceptions toolchains
Nowadays, GDB propagates C++ exceptions across readline using
setjmp/longjmp 89525768cd08 ("Propagate GDB/C++ exceptions across
readline using sj/lj-based TRY/CATCH") because DWARF-based unwinding
can't cross C functions compiled without -fexceptions (see details
from the commit above).
Unfortunately, toolchains that use SjLj-based C++ exceptions got
broken with that fix, because _Unwind_SjLj_Unregister, which is put at
the exit of a function, is not executed due to the longjmp added by
that commit.
(gdb) [New Thread 2936.0xb80]
kill
Thread 1 received signal SIGSEGV, Segmentation fault.
0x03ff662b in ?? ()
top?bt 15
#0 0x03ff662b in ?? ()
#1 0x00526b92 in stdin_event_handler (error=0, client_data=0x172ed8)
at ../../binutils-gdb/gdb/event-top.c:555
#2 0x00525a94 in handle_file_event (ready_mask=<optimized out>,
file_ptr=0x3ff5cb8) at ../../binutils-gdb/gdb/event-loop.c:733
#3 gdb_wait_for_event (block=block@entry=1)
at ../../binutils-gdb/gdb/event-loop.c:884
#4 0x00525bfb in gdb_do_one_event ()
at ../../binutils-gdb/gdb/event-loop.c:347
#5 0x00525ce5 in start_event_loop ()
at ../../binutils-gdb/gdb/event-loop.c:371
#6 0x0051fada in captured_command_loop (data=0x0)
at ../../binutils-gdb/gdb/main.c:324
#7 0x0051cf5d in catch_errors (
func=func@entry=0x51fab0 <captured_command_loop(void*)>,
func_args=func_args@entry=0x0,
errstring=errstring@entry=0x7922bf <VEC_interp_factory_p_quick_push(VEC_inte rp_factory_p*, interp_factory*, char const*, unsigned int)::__PRETTY_FUNCTION__+351> "", mask=mask@entry=RETURN_MASK_ALL)
at ../../binutils-gdb/gdb/exceptions.c:236
#8 0x00520f0c in captured_main (data=0x328feb4)
at ../../binutils-gdb/gdb/main.c:1149
#9 gdb_main (args=args@entry=0x328feb4) at ../../binutils-gdb/gdb/main.c:1159
#10 0x0071e400 in main (argc=1, argv=0x171220)
at ../../binutils-gdb/gdb/gdb.c:32
Fix this by making the functions involved in setjmp/longjmp as
noexcept, so that the compiler knows it doesn't need to emit the
_Unwind_SjLj_Register / _Unwind_SjLj_Unregister calls for C++
exceptions.
Tested on x86_64 Fedora 23 with:
- GCC 5.3.1 w/ DWARF-based exceptions.
- GCC 7 built with --enable-sjlj-exceptions.
gdb/ChangeLog:
2016-12-20 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
PR gdb/20977
* event-top.c (gdb_rl_callback_read_char_wrapper_noexcept): New
noexcept function, factored out from ...
(gdb_rl_callback_read_char_wrapper): ... this.
(gdb_rl_callback_handler): Mark noexcept.
Antoine Tremblay [Tue, 20 Dec 2016 13:42:10 +0000 (08:42 -0500)]
Set emacs default mode for the GDB directory to C++
Since GDB has switched to C++ but the file names are still .c emacs does
not load the proper mode when opening files in the gdb directory.
This patch fixes that by enabling c++ mode.
This patch also fixes indentation tweaks as discussed in this thread:
https://sourceware.org/ml/gdb-patches/2016-12/msg00074.html
Indent with gdb-code-style.el included and the .dir-locals.el is as such:
namespace TestNameSpace {
class test
{
public:
test test() {}
int m_a;
};
struct teststruct
{
int a;
}
}
gdb/ChangeLog:
* .dir-locals.el: Set c++ mode for the directory and set indent
properly.
* gdb-code-style.el: Set c-set-offset 'innamespace as a safe value
to be used in .dir-locals.el.
MIPS16/opcodes: Respect ISA and ASE in disassembly
Limit MIPS16 instruction disassembly according to the ISA level and ASE
set selected, as with the regular MIPS and microMIPS instruction sets.
Retain the property of `objdump -m mips:16' disassembling all MIPS16
instructions however, regardless of any ISA level recorded in the binary
examined.
To validate the disassembler use the GAS test suite for its convenience
of running tests across multiple ISAs, even though placing the tests in
the binutils test suite would be more appropriate. Adjust the single
binutils test which depends on 64-bit instruction disassembly to have
the ISA level required actually recorded in the binary examined.
opcodes/
* mips-dis.c (mips_arch_choices): Use ISA_MIPS64 rather than
ISA_MIPS3 as the `isa' selection in the `bfd_mach_mips16' entry.
(print_insn_mips16): Check opcode entries for validity against
the ISA level and ASE set selected.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.s: Use `.module'
rather than `.set' to set the ISA level.
gas/
* testsuite/gas/mips/mips16-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-sub.d: New test.
* testsuite/gas/mips/mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-sub.d: New test.
* testsuite/gas/mips/mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-64@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64-sub.d: New test.
* testsuite/gas/mips/mips16-sub.s: New test source.
* testsuite/gas/mips/mips16e-sub.s: New test source.
* testsuite/gas/mips/mips16e-64-sub.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
MIPS/GAS/testsuite: Extend MIPS16 testing over multiple ISAs
Run the `mips16', `mips16-64', `mips16e-64', `mips16-macro',
`mips16-macro-e' and `mips16-macro-t' GAS tests over multiple MIPS16
ISAs.
gas/
* testsuite/gas/mips/mips16.d: Adjust test for multiple MIPS16
ISA testing.
* testsuite/gas/mips/mips16-64.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16e-64.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16-macro.d: Adjust test for multiple
MIPS16 ISA testing.
* testsuite/gas/mips/mips16e-64.s: Ensure MIPS16 ISA annotation.
* testsuite/gas/mips/mips16e-64.l: Rename to...
* testsuite/gas/mips/mips16e-32@mips16e-64.l: ... this.
* testsuite/gas/mips/mips16-64@mips16.d: New test.
* testsuite/gas/mips/mips16-64@mips16-64.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-macro.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16e-64.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-macro-t.l: New stderr
output.
* testsuite/gas/mips/mips.exp: Run `mips16', `mips16-64',
`mips16-macro', `mips16-macro-t', `mips16-macro-e' and
`mips16e-64' testing across multiple MIPS16 ISAs. Fold
`mips16-macro' and `mips16e-64' list test invocations into
corresponding dump tests.
projects / thirdparty / binutils-gdb.git / log
