resource: improve child resource handling in release_mem_region_adjustable()
When memory block is removed via try_remove_memory(), it eventually
reaches release_mem_region_adjustable(). The current implementation
assumes that when a busy memory resource is split into two, all child
resources remain in the lower address range.
This simplification causes problems when child resources actually belong
to the upper split. For example:
* Initial memory layout:
lsmem
RANGE SIZE STATE REMOVABLE BLOCK
0x0000000000000000-0x00000002ffffffff 12G online yes 0-95
* After offlining and removing range
0x150000000-0x157ffffff
lsmem -o RANGE,SIZE,STATE,BLOCK,CONFIGURED
(output according to upcoming lsmem changes with the configured column:
s390)
RANGE SIZE STATE BLOCK CONFIGURED
0x0000000000000000-0x000000014fffffff 5.3G online 0-41 yes
0x0000000150000000-0x0000000157ffffff 128M offline 42 no
0x0000000158000000-0x00000002ffffffff 6.6G online 43-95 yes
The iomem resource gets split into two entries, but kernel code, kernel
data, and kernel bss remain attached to the lower resource [0–5376M]
instead of the correct upper resource [5504M–12288M].
Also, resource adjustment doesn't happen and stale resources still cover
[0-12288M]. Later, memory re-add fails in register_memory_resource() with
-EBUSY.
Enhance release_mem_region_adjustable() to reassign child resources to the
correct parent after a split. Children are now assigned based on their
actual range: If they fall within the lower split, keep them in the lower
parent. If they fall within the upper split, move them to the upper
parent.
Kernel code/data/bss regions are not offlined, so they will always reside
entirely within one parent and never span across both.
Quanmin Yan [Wed, 10 Sep 2025 11:32:21 +0000 (19:32 +0800)]
mm/damon/reclaim: support addr_unit for DAMON_RECLAIM
Implement a sysfs file to expose addr_unit for DAMON_RECLAIM users.
During parameter application, use the configured addr_unit parameter to
perform the necessary initialization. Similar to the core layer, prevent
setting addr_unit to zero.
It is worth noting that when monitor_region_start and monitor_region_end
are unset (i.e., 0), their values will later be set to biggest_system_ram.
At that point, addr_unit may not be the default value 1. Although we
could divide the biggest_system_ram value by addr_unit, changing addr_unit
without setting monitor_region_start/end should be considered a user
misoperation. And biggest_system_ram is only within the 0~ULONG_MAX
range, system can clearly work correctly with addr_unit=1. Therefore, if
monitor_region_start/end are unset, always silently reset addr_unit to 1.
Link: https://lkml.kernel.org/r/20250910113221.1065764-3-yanquanmin1@huawei.com Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: ze zuo <zuoze1@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Quanmin Yan [Wed, 10 Sep 2025 11:32:20 +0000 (19:32 +0800)]
mm/damon/lru_sort: support addr_unit for DAMON_LRU_SORT
Patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
DAMON_RECLAIM".
In DAMON_LRU_SORT and DAMON_RECLAIM, damon_ctx is independent of the core.
Add addr_unit to these modules to support systems like ARM32 with LPAE.
This patch (of 2):
Implement a sysfs file to expose addr_unit for DAMON_LRU_SORT users.
During parameter application, use the configured addr_unit parameter to
perform the necessary initialization. Similar to the core layer, prevent
setting addr_unit to zero.
It is worth noting that when monitor_region_start and monitor_region_end
are unset (i.e., 0), their values will later be set to biggest_system_ram.
At that point, addr_unit may not be the default value 1. Although we
could divide the biggest_system_ram value by addr_unit, changing addr_unit
without setting monitor_region_start/end should be considered a user
misoperation. And biggest_system_ram is only within the 0~ULONG_MAX
range, system can clearly work correctly with addr_unit=1. Therefore, if
monitor_region_start/end are unset, always silently reset addr_unit to 1.
selftests/mm: gup_tests: option to GUP all pages in a single call
We recently missed detecting an issue during early testing because the
default (!all) tests would not trigger it and even when running "all"
tests it only would happen sometimes because of races.
So let's allow for an easy way to specify "GUP all pages in a single
call", extend the test matrix and extend our default (!all) tests.
By GUP'ing all pages in a single call, with the default size of 128MiB
we'll cover multiple leaf page tables / PMDs on architectures with sane
THP sizes.
Link: https://lkml.kernel.org/r/20250910093051.1693097-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We already use page->private for storing the order of a page while it's in
the buddy allocator system; extend that to also storing the order while
it's in the pcp_llist.
Link: https://lkml.kernel.org/r/20250910142923.2465470-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: remove redundant test in validate_page_before_insert()
The page_has_type() call would have included slab since commit 46df8e73a4a3 and now we don't even get that far because slab pages have a
zero refcount since commit 9aec2fb0fd5e.
Link: https://lkml.kernel.org/r/20250910142923.2465470-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These small cleanups can be applied now to reduce conflicts during the
next merge window. They're all from various efforts to split struct page
from other memdescs. Thanks to Vlastimil for the suggestion.
This patch (of 3):
These functions do not modify their arguments. Telling the compiler this
may improve code generation, and allows us to pass const arguments from
other functions.
mm: lru_add_drain_all() do local lru_add_drain() first
No numbers to back this up, but it seemed obvious to me, that if there are
competing lru_add_drain_all()ers, the work will be minimized if each
flushes its own local queues before locking and doing cross-CPU drains.
Link: https://lkml.kernel.org/r/33389bf8-f79d-d4dd-b7a4-680c4aa21b23@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Chris Li <chrisl@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Keir Fraser <keirf@google.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Li Zhe <lizhe.67@bytedance.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Shivank Garg <shivankg@amd.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Xu <weixugc@google.com> Cc: Will Deacon <will@kernel.org> Cc: yangge <yangge1116@126.com> Cc: Yuanchu Xie <yuanchu@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Aristeu Rozanski [Tue, 26 Aug 2025 15:37:21 +0000 (11:37 -0400)]
mm: make folio page count functions return unsigned
As raised by Andrew [1], a folio/compound page never spans a negative
number of pages. Consequently, let's use "unsigned long" instead of
"long" consistently for folio_nr_pages(), folio_large_nr_pages() and
compound_nr().
Using "unsigned long" as return value is fine, because even
"(long)-folio_nr_pages()" will keep on working as expected. Using
"unsigned int" instead would actually break these use cases.
This patch takes the first step changing these to return unsigned long
(and making drm_gem_get_pages() use the new types instead of replacing
min()).
In the future, we might want to make more callers of these functions to
consistently use "unsigned long".
selftests/mm: remove PROT_EXEC req from file-collapse tests
As of v6.8 commit 7fbb5e188248 ("mm: remove VM_EXEC requirement for THP
eligibility") thp collapse no longer requires file-backed mappings be
created with PROT_EXEC.
Remove the overly-strict dependency from thp collapse tests so we test the
least-strict requirement for success.
Link: https://lkml.kernel.org/r/20250909190534.512801-1-zokeefe@google.com Signed-off-by: Zach O'Keefe <zokeefe@google.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Brian Norris [Tue, 9 Sep 2025 20:13:57 +0000 (13:13 -0700)]
mm: vm_event_item: explicit #include for THREAD_SIZE
This header uses THREAD_SIZE, which is provided by the thread_info.h
header but is not included in this header. Depending on the #include
ordering in other files, this can produce preprocessor errors.
Link: https://lkml.kernel.org/r/20250909201419.827638-1-briannorris@chromium.org Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_tag: avoid warnings when freeing non-compound "tail" pages
When freeing "tail" pages of a non-compount high-order page, we properly
subtract the allocation tag counters, however later when these pages are
released, alloc_tag_sub() will issue warnings because tags for these pages
are NULL.
This issue was originally anticipated by Vlastimil in his review [1] and
then recently reported by David. Prevent warnings by marking the tags
empty.
Link: https://lkml.kernel.org/r/20250915212756.3998938-4-surenb@google.com Link: https://lore.kernel.org/all/6db0f0c8-81cb-4d04-9560-ba73d63db4b8@suse.cz/ Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: David Wang <00107082@163.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Usama Arif <usamaarif642@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Sourav Panda <souravpanda@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_tag: prevent enabling memory profiling if it was shut down
Memory profiling can be shut down due to reasons like a failure during
initialization. When this happens, the user should not be able to
re-enable it. Current sysctrl interface does not handle this properly and
will allow re-enabling memory profiling. Fix this by checking for this
condition during sysctrl write operation.
Link: https://lkml.kernel.org/r/20250915212756.3998938-3-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Acked-by: Usama Arif <usamaarif642@gmail.com> Cc: David Wang <00107082@163.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Sourav Panda <souravpanda@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jackie Liu [Mon, 8 Sep 2025 06:26:14 +0000 (14:26 +0800)]
mm/shmem: remove unused entry_order after large swapin rework
After commit 93c0476e7057 ("mm/shmem, swap: rework swap entry and index
calculation for large swapin"), xas_get_order() will never return a
non-zero value for `entry_order` in shmem_split_large_entry(). As a
result, the local variable `entry_order` is effectively unused.
Clean up the code by removing `entry_order` and directly using
`cur_order`. This change is purely a refactor and has no functional
impact.
No functional change intended.
Link: https://lkml.kernel.org/r/20250908062614.89880-1-liu.yun@linux.dev Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kairui Song <kasong@tencent.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lance Yang [Mon, 8 Sep 2025 09:07:41 +0000 (17:07 +0800)]
mm: skip mlocked THPs that are underused early in deferred_split_scan()
When we stumble over a fully-mapped mlocked THP in the deferred shrinker,
it does not make sense to try to detect whether it is underused, because
try_to_map_unused_to_zeropage(), called while splitting the folio, will
not actually replace any zeroed pages by the shared zeropage.
Splitting the folio in that case does not make any sense, so let's not
even scan to check if the folio is underused.
Link: https://lkml.kernel.org/r/20250908090741.61519-1-lance.yang@linux.dev Signed-off-by: Lance Yang <lance.yang@linux.dev> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Usama Arif <usamaarif642@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Lance Yang <lance.yang@linux.dev> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Kiryl Shutsemau <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Once support for THP migration of zone device pages is enabled, device
private swap entries will be found during the walk not only for PTEs but
also for PMDs.
Therefore, it is necessary to extend to PMDs the special handling which is
already in place for PTEs when device private pages are owned by the
caller: instead of faulting or skipping the range, the correct behavior is
to use the swap entry to populate HMM PFNs.
This change is a prerequisite to make use of device-private THP in drivers
using drivers/gpu/drm/drm_pagemap, such as xe.
Even though subsequent PFNs can be inferred when handling large order
PFNs, the PFN list is still fully populated because this is currently
expected by HMM users. In case this changes in the future, that is all
HMM users support a sparsely populated PFN list, the for() loop can be
made to skip remaining PFNs for the current order. A quick test shows the
loop takes about 10 ns, roughly 20 times faster than without this
optimization.
Link: https://lkml.kernel.org/r/20250908091052.612303-1-francois.dugast@intel.com Signed-off-by: Francois Dugast <francois.dugast@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Leon Romanovsky <leonro@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: David Airlie <airlied@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Mika Penttilä <mpenttil@redhat.com> Cc: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/gup: fix handling of errors from arch_make_folio_accessible() in follow_page_pte()
In case we call arch_make_folio_accessible() and it fails, we would
incorrectly return a value that is "!= 0" to the caller, indicating that
we pinned all requested pages and that the caller can keep going.
follow_page_pte() is not supposed to return error values, but instead "0"
on failure and "1" on success -- we'll clean that up separately.
In case we return "!= 0", the caller will just keep going pinning more
pages. If we happen to pin a page afterwards, we're in trouble, because
we essentially skipped some pages in the requested range.
Staring at the arch_make_folio_accessible() implementation on s390x, I
assume it should actually never really fail unless something unexpected
happens (BUG?). So let's not CC stable and just fix common code to do the
right thing.
Clean up the code a bit now that there is no reason to store the return
value of arch_make_folio_accessible().
Link: https://lkml.kernel.org/r/20250908094517.303409-1-david@redhat.com Fixes: f28d43636d6f ("mm/gup/writeback: add callbacks for inaccessible pages") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chanwon Park [Mon, 8 Sep 2025 10:04:10 +0000 (19:04 +0900)]
mm: re-enable kswapd when memory pressure subsides or demotion is toggled
If kswapd fails to reclaim pages from a node MAX_RECLAIM_RETRIES in a
row, kswapd on that node gets disabled. That is, the system won't wakeup
kswapd for that node until page reclamation is observed at least once.
That reclamation is mostly done by direct reclaim, which in turn enables
kswapd back.
However, on systems with CXL memory nodes, workloads with high anon page
usage can disable kswapd indefinitely, without triggering direct
reclaim. This can be reproduced with following steps:
numa node 0 (32GB memory, 48 CPUs)
numa node 2~5 (512GB CXL memory, 128GB each)
(numa node 1 is disabled)
swap space 8GB
1) Set /sys/kernel/mm/demotion_enabled to 0.
2) Set /proc/sys/kernel/numa_balancing to 0.
3) Run a process that allocates and random accesses 500GB of anon
pages.
4) Let the process exit normally.
During 3), free memory on node 0 gets lower than low watermark, and
kswapd runs and depletes swap space. Then, kswapd fails consecutively
and gets disabled. Allocation afterwards happens on CXL memory, so node
0 never gains more memory pressure to trigger direct reclaim.
After 4), kswapd on node 0 remains disabled, and tasks running on that
node are unable to swap. If you turn on NUMA_BALANCING_MEMORY_TIERING
and demotion now, it won't work properly since kswapd is disabled.
To mitigate this problem, reset kswapd_failures to 0 on following
conditions:
a) ZONE_BELOW_HIGH bit of a zone in hopeless node with a fallback
memory node gets cleared.
b) demotion_enabled is changed from false to true.
Rationale for a):
ZONE_BELOW_HIGH bit being cleared might be a sign that the node may
be reclaimable afterwards. This won't help much if the memory-hungry
process keeps running without freeing anything, but at least the node
will go back to reclaimable state when the process exits.
Rationale for b):
When demotion_enabled is false, kswapd can only reclaim anon pages by
swapping them out to swap space. If demotion_enabled is turned on,
kswapd can demote anon pages to another node for reclaiming. So, the
original failure count for determining reclaimability is no longer
valid.
Since kswapd_failures resets may be missed by ++ operation, it is
changed from int to atomic_t.
[akpm@linux-foundation.org: tweak whitespace] Link: https://lkml.kernel.org/r/aL6qGi69jWXfPc4D@pcw-MS-7D22 Signed-off-by: Chanwon Park <flyinrm@gmail.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chunyu Hu [Fri, 12 Sep 2025 01:37:11 +0000 (09:37 +0800)]
selftests/mm: fix va_high_addr_switch.sh failure on x86_64
The test will fail as below on x86_64 with cpu la57 support (will skip if
no la57 support). Note, the test requries nr_hugepages to be set first.
# running bash ./va_high_addr_switch.sh
# -------------------------------------
# mmap(addr_switch_hint - pagesize, pagesize): 0x7f55b60fa000 - OK
# mmap(addr_switch_hint - pagesize, (2 * pagesize)): 0x7f55b60f9000 - OK
# mmap(addr_switch_hint, pagesize): 0x800000000000 - OK
# mmap(addr_switch_hint, 2 * pagesize, MAP_FIXED): 0x800000000000 - OK
# mmap(NULL): 0x7f55b60f9000 - OK
# mmap(low_addr): 0x40000000 - OK
# mmap(high_addr): 0x1000000000000 - OK
# mmap(high_addr) again: 0xffff55b6136000 - OK
# mmap(high_addr, MAP_FIXED): 0x1000000000000 - OK
# mmap(-1): 0xffff55b6134000 - OK
# mmap(-1) again: 0xffff55b6132000 - OK
# mmap(addr_switch_hint - pagesize, pagesize): 0x7f55b60fa000 - OK
# mmap(addr_switch_hint - pagesize, 2 * pagesize): 0x7f55b60f9000 - OK
# mmap(addr_switch_hint - pagesize/2 , 2 * pagesize): 0x7f55b60f7000 - OK
# mmap(addr_switch_hint, pagesize): 0x800000000000 - OK
# mmap(addr_switch_hint, 2 * pagesize, MAP_FIXED): 0x800000000000 - OK
# mmap(NULL, MAP_HUGETLB): 0x7f55b5c00000 - OK
# mmap(low_addr, MAP_HUGETLB): 0x40000000 - OK
# mmap(high_addr, MAP_HUGETLB): 0x1000000000000 - OK
# mmap(high_addr, MAP_HUGETLB) again: 0xffff55b5e00000 - OK
# mmap(high_addr, MAP_FIXED | MAP_HUGETLB): 0x1000000000000 - OK
# mmap(-1, MAP_HUGETLB): 0x7f55b5c00000 - OK
# mmap(-1, MAP_HUGETLB) again: 0x7f55b5a00000 - OK
# mmap(addr_switch_hint - pagesize, 2*hugepagesize, MAP_HUGETLB): 0x800000000000 - FAILED
# mmap(addr_switch_hint , 2*hugepagesize, MAP_FIXED | MAP_HUGETLB): 0x800000000000 - OK
# [FAIL]
addr_switch_hint is defined as DFEFAULT_MAP_WINDOW in the failed test (for
x86_64, DFEFAULT_MAP_WINDOW is defined as (1UL<<47) - pagesize) in 64 bit.
Before commit cc92882ee218 ("mm: drop hugetlb_get_unmapped_area{_*}
functions"), for x86_64 hugetlb_get_unmapped_area() is handled in arch
code arch/x86/mm/hugetlbpage.c and addr is checked with
map_address_hint_valid() after align with 'addr &= huge_page_mask(h)'
which is a round down way, and it will fail the check because the addr is
within the DEFAULT_MAP_WINDOW but (addr + len) is above the
DFEFAULT_MAP_WINDOW. So it wil go through the
hugetlb_get_unmmaped_area_top_down() to find an area within the
DFEFAULT_MAP_WINDOW.
After commit cc92882ee218 ("mm: drop hugetlb_get_unmapped_area{_*}
functions"). The addr hint for hugetlb_get_unmmaped_area() will be
rounded up and aligned to hugepage size with ALIGN() for all arches. And
after the align, the addr will be above the default MAP_DEFAULT_WINDOW,
and the map_addresshint_valid() check will pass because both aligned addr
(addr0) and (addr + len) are above the DEFAULT_MAP_WINDOW, and the aligned
hint address (0x800000000000) is returned as an suitable gap is found
there, in arch_get_unmapped_area_topdown().
To still cover the case that addr is within the DEFAULT_MAP_WINDOW, and
addr + len is above the DFEFAULT_MAP_WINDOW, change to choose the last
hugepage aligned address within the DEFAULT_MAP_WINDOW as the hint addr,
and the addr + len (2 hugepages) will be one hugepage above the
DEFAULT_MAP_WINDOW. An aligned address won't be affected by the page
round up or round down from kernel, so it's determistic.
Link: https://lkml.kernel.org/r/20250912013711.3002969-4-chuhu@redhat.com Fixes: cc92882ee218 ("mm: drop hugetlb_get_unmapped_area{_*} functions") Signed-off-by: Chunyu Hu <chuhu@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chunyu Hu [Fri, 12 Sep 2025 01:37:10 +0000 (09:37 +0800)]
selftests/mm: alloc hugepages in va_high_addr_switch test
Alloc hugepages in the test internally, so we don't fully rely on the
run_vmtests.sh. If run_vmtests.sh does that great, free hugepages is
enough for being used to run the test, leave it as it is, otherwise setup
the hugepages in the test.
Save the original nr_hugepages value and restore it after test finish, so
leave a stable test envronment.
Chunyu Hu [Fri, 12 Sep 2025 01:37:09 +0000 (09:37 +0800)]
selftests/mm: fix hugepages cleanup too early
Patch series "Fix va_high_addr_switch.sh test failure", v3.
These three patches fix the va_high_addr_switch.sh test failure on x86_64.
Patch 1 fixes the hugepage setup issue that nr_hugepages is reset too
early in run_vmtests.sh and break the later va_high_addr_switch testing.
Patch 2 adds hugepage setup in va_high_addr_switch test, so that it can
still work if vm_runtests.sh changes the hugepage setup someday.
Patch 3 fixes the test failure caused by the hint addr align method change
in hugetlb_get_unmapped_area().
This patch (of 3):
The nr_hugepgs variable is used to keep the original nr_hugepages at the
hugepage setup step at test beginning. After userfaultfd test, a cleaup
is executed, both /sys/kernel/mm/hugepages/hugepages-*/nr_hugepages and
/proc/sys//vm/nr_hugepages are reset to 'original' value before
userfaultfd test starts.
Issue here is the value used to restore /proc/sys/vm/nr_hugepages is
nr_hugepgs which is the initial value before the vm_runtests.sh runs, not
the value before userfaultfd test starts. 'va_high_addr_swith.sh' tests
runs after that will possibly see no hugepages available for test, and got
EINVAL when mmap(HUGETLB), making the result invalid.
And before pkey tests, nr_hugepgs is changed to be used as a temp variable
to save nr_hugepages before pkey test, and restore it after pkey tests
finish. The original nr_hugepages value is not tracked anymore, so no way
to restore it after all tests finish.
Add a new variable orig_nr_hugepgs to save the original nr_hugepages, and
and restore it to nr_hugepages after all tests finish. And change to use
the nr_hugepgs variable to save the /proc/sys/vm/nr_hugeages after
hugepage setup, it's also the value before userfaultfd test starts, and
the correct value to be restored after userfaultfd finishes. The
va_high_addr_switch.sh broken will be resolved.
That's because scripts/decodecode doesn't preserve the alignment. No need
to modify it, it is enough to give only the "Code: (...)" part to this
script, and print the prefix without modifications.
With lines having a symbol to decode, the script was only trying to
preserve the alignment for the timestamps, but not the rest, nor when the
caller was set (CONFIG_PRINTK_CALLER=y).
A few patches slightly improving the output generated by
decode_stacktrace.sh.
This patch (of 3):
Lines having a symbol to decode might not always have info after this
symbol. It means ${info_str} might not be set, but it will always be
printed after a space, causing trailing whitespaces.
That's a detail, but when the output is opened with an editor marking
these trailing whitespaces, that's a bit disturbing. It is easy to remove
them by printing this variable with a space only if it is set.
While at it, do the same with ${module} and print everything in one line.
ptdesc: remove references to folios from __pagetable_ctor() and pagetable_dtor()
In preparation for splitting struct ptdesc from struct page and struct
folio, remove mentions of struct folio from these functions. Introduce
ptdesc_nr_pages() to avoid using lruvec_stat_add/sub_folio()
Link: https://lkml.kernel.org/r/20250908171104.2409217-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The first two patches here are preparation for splitting struct ptdesc
from struct page and struct folio. I think their only dependency is on
the memdesc_flags_t patches from August which is in mm-new. The third
patch is just something I noticed while working on the code.
This patch (of 3):
Use the new memdesc_flags_t type to show that these are the same bits as
page/folio/slab and thesefore have the zone/node/section information in
them. Remove a use of ptdesc_folio() by converting
pagetable_is_reserved() to use test_bit() directly.
Alice Ryhl [Tue, 2 Sep 2025 08:36:11 +0000 (08:36 +0000)]
maple_tree: remove lockdep_map_p typedef
Having the ma_external_lock field exist when CONFIG_LOCKDEP=n isn't used
anywhere, so just get rid of it. This also avoids generating a typedef
called lockdep_map_p that could overlap with typedefs in other header
files.
Stanislav Fort [Fri, 5 Sep 2025 09:38:51 +0000 (12:38 +0300)]
mm/memcg: v1: account event registrations and drop world-writable cgroup.event_control
In cgroup v1, the legacy cgroup.event_control file is world-writable and
allows unprivileged users to register unbounded events and thresholds.
Each registration allocates kernel memory without capping or memcg
charging, which can be abused to exhaust kernel memory in affected
configurations.
Make the following minimal changes:
- Account allocations with __GFP_ACCOUNT in event and threshold registration.
- Remove CFTYPE_WORLD_WRITABLE from cgroup.event_control to make it
owner-writable.
This does not affect cgroup v2. Allocations are still subject to kmem
accounting being enabled, but this reduces unbounded global growth.
Link: https://lkml.kernel.org/r/20250905093851.80596-1-disclosure@aisle.com Signed-off-by: Stanislav Fort <disclosure@aisle.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:01:00 +0000 (00:01 +0800)]
mm, swap: use a single page for swap table when the size fits
We have a cluster size of 512 slots. Each slot consumes 8 bytes in swap
table so the swap table size of each cluster is exactly one page (4K).
If that condition is true, allocate one page direct and disable the slab
cache to reduce the memory usage of swap table and avoid fragmentation.
Link: https://lkml.kernel.org/r/20250916160100.31545-16-ryncsn@gmail.com Co-developed-by: Chris Li <chrisl@kernel.org> Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Suggested-by: Chris Li <chrisl@kernel.org> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:59 +0000 (00:00 +0800)]
mm, swap: implement dynamic allocation of swap table
Now swap table is cluster based, which means free clusters can free its
table since no one should modify it.
There could be speculative readers, like swap cache look up, protect them
by making them RCU protected. All swap table should be filled with null
entries before free, so such readers will either see a NULL pointer or a
null filled table being lazy freed.
On allocation, allocate the table when a cluster is used by any order.
This way, we can reduce the memory usage of large swap device
significantly.
This idea to dynamically release unused swap cluster data was initially
suggested by Chris Li while proposing the cluster swap allocator and it
suits the swap table idea very well.
Link: https://lkml.kernel.org/r/20250916160100.31545-15-ryncsn@gmail.com Co-developed-by: Chris Li <chrisl@kernel.org> Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Suggested-by: Chris Li <chrisl@kernel.org> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:58 +0000 (00:00 +0800)]
mm, swap: remove contention workaround for swap cache
Swap cluster setup will try to shuffle the clusters on initialization. It
was helpful to avoid contention for the swap cache space. The cluster
size (2M) was much smaller than each swap cache space (64M), so shuffling
the cluster means the allocator will try to allocate swap slots that are
in different swap cache spaces for each CPU, reducing the chance of two
CPUs using the same swap cache space, and hence reducing the contention.
Now, swap cache is managed by swap clusters, this shuffle is pointless.
Just remove it, and clean up related macros.
This also improves the HDD swap performance as shuffling IO is a bad idea
for HDD, and now the shuffling is gone. Test have shown a ~40%
performance gain for HDD [1]:
Doing sequential swap in of 8G data using 8 processes with usemem, average
of 3 test runs:
Before: 1270.91 KB/s per process
After: 1849.54 KB/s per process
Link: https://lore.kernel.org/linux-mm/CAMgjq7AdauQ8=X0zeih2r21QoV=-WWj1hyBxLWRzq74n-C=-Ng@mail.gmail.com/ Link: https://lkml.kernel.org/r/20250916160100.31545-14-ryncsn@gmail.com Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202504241621.f27743ec-lkp@intel.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:57 +0000 (00:00 +0800)]
mm, swap: mark swap address space ro and add context debug check
Swap cache is now backed by swap table, and the address space is not
holding any mutable data anymore. And swap cache is now protected by the
swap cluster lock, instead of the XArray lock. All access to swap cache
are wrapped by swap cache helpers. Locking is mostly handled internally
by swap cache helpers, only a few __swap_cache_* helpers require the
caller to lock the cluster by themselves.
Worth noting that, unlike XArray, the cluster lock is not IRQ safe. The
swap cache was very different compared to filemap, and now it's completely
separated from filemap. Nothing wants to mark or change anything or do a
writeback callback in IRQ.
So explicitly document this and add a debug check to avoid further
potential misuse. And mark the swap cache space as read-only to avoid any
user wrongly mixing unexpected filemap helpers with swap cache.
Link: https://lkml.kernel.org/r/20250916160100.31545-13-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:56 +0000 (00:00 +0800)]
mm, swap: use the swap table for the swap cache and switch API
Introduce basic swap table infrastructures, which are now just a
fixed-sized flat array inside each swap cluster, with access wrappers.
Each cluster contains a swap table of 512 entries. Each table entry is an
opaque atomic long. It could be in 3 types: a shadow type (XA_VALUE), a
folio type (pointer), or NULL.
In this first step, it only supports storing a folio or shadow, and it is
a drop-in replacement for the current swap cache. Convert all swap cache
users to use the new sets of APIs. Chris Li has been suggesting using a
new infrastructure for swap cache for better performance, and that idea
combined well with the swap table as the new backing structure. Now the
lock contention range is reduced to 2M clusters, which is much smaller
than the 64M address_space. And we can also drop the multiple
address_space design.
All the internal works are done with swap_cache_get_* helpers. Swap cache
lookup is still lock-less like before, and the helper's contexts are same
with original swap cache helpers. They still require a pin on the swap
device to prevent the backing data from being freed.
Swap cache updates are now protected by the swap cluster lock instead of
the XArray lock. This is mostly handled internally, but new
__swap_cache_* helpers require the caller to lock the cluster. So, a few
new cluster access and locking helpers are also introduced.
A fully cluster-based unified swap table can be implemented on top of this
to take care of all count tracking and synchronization work, with dynamic
allocation. It should reduce the memory usage while making the
performance even better.
Link: https://lkml.kernel.org/r/20250916160100.31545-12-ryncsn@gmail.com Co-developed-by: Chris Li <chrisl@kernel.org> Signed-off-by: Chris Li <chrisl@kernel.org> Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:55 +0000 (00:00 +0800)]
mm, swap: wrap swap cache replacement with a helper
There are currently three swap cache users that are trying to replace an
existing folio with a new one: huge memory splitting, migration, and shmem
replacement. What they are doing is quite similar.
Introduce a common helper for this. In later commits, this can be easily
switched to use the swap table by updating this helper.
The newly added helper also makes the swap cache API better defined, and
make debugging easier by adding a few more debug checks.
Migration and shmem replace are meant to clone the folio, including
content, swap entry value, and flags. And splitting will adjust each sub
folio's swap entry according to order, which could be non-uniform in the
future. So document it clearly that it's the caller's responsibility to
set up the new folio's swap entries and flags before calling the helper.
The helper will just follow the new folio's entry value.
This also prepares for replacing high-order folios in the swap cache.
Currently, only splitting to order 0 is allowed for swap cache folios.
Using the new helper, we can handle high-order folio splitting better.
Link: https://lkml.kernel.org/r/20250916160100.31545-11-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:54 +0000 (00:00 +0800)]
mm/shmem, swap: remove redundant error handling for replacing folio
Shmem may replace a folio in the swap cache if the cached one doesn't fit
the swapin's GFP zone. When doing so, shmem has already double checked
that the swap cache folio is locked, still has the swap cache flag set,
and contains the wanted swap entry. So it is impossible to fail due to an
XArray mismatch. There is even a comment for that.
Delete the defensive error handling path, and add a WARN_ON instead: if
that happened, something has broken the basic principle of how the swap
cache works, we should catch and fix that.
Link: https://lkml.kernel.org/r/20250916160100.31545-10-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:53 +0000 (00:00 +0800)]
mm, swap: cleanup swap cache API and add kerneldoc
In preparation for replacing the swap cache backend with the swap table,
clean up and add proper kernel doc for all swap cache APIs. Now all swap
cache APIs are well-defined with consistent names.
No feature change, only renaming and documenting.
Link: https://lkml.kernel.org/r/20250916160100.31545-9-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Barry Song <baohua@kernel.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:52 +0000 (00:00 +0800)]
mm, swap: tidy up swap device and cluster info helpers
swp_swap_info is the most commonly used helper for retrieving swap info.
It has an internal check that may lead to a NULL return value, but almost
none of its caller checks the return value, making the internal check
pointless. In fact, most of these callers already ensured the entry is
valid and never expect a NULL value.
Tidy this up and improve the function names. If the caller can make sure
the swap entry/type is valid and the device is pinned, use the new
introduced __swap_entry_to_info/__swap_type_to_info instead. They have
more debug sanity checks and lower overhead as they are inlined.
Callers that may expect a NULL value should use
swap_entry_to_info/swap_type_to_info instead.
No feature change. The rearranged codes should have had no effect, or
they should have been hitting NULL de-ref bugs already. Only some new
sanity checks are added so potential issues may show up in debug build.
The new helpers will be frequently used with swap table later when working
with swap cache folios. A locked swap cache folio ensures the entries are
valid and stable so these helpers are very helpful.
Link: https://lkml.kernel.org/r/20250916160100.31545-8-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:51 +0000 (00:00 +0800)]
mm, swap: rename and move some swap cluster definition and helpers
No feature change, move cluster related definitions and helpers to
mm/swap.h, also tidy up and add a "swap_" prefix for cluster lock/unlock
helpers, so they can be used outside of swap files. And while at it, add
kerneldoc.
Link: https://lkml.kernel.org/r/20250916160100.31545-7-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:50 +0000 (00:00 +0800)]
mm, swap: always lock and check the swap cache folio before use
Swap cache lookup only increases the reference count of the returned
folio. That's not enough to ensure a folio is stable in the swap cache,
so the folio could be removed from the swap cache at any time. The caller
should always lock and check the folio before using it.
We have just documented this in kerneldoc, now introduce a helper for swap
cache folio verification with proper sanity checks.
Also, sanitize a few current users to use this convention and the new
helper for easier debugging. They were not having observable problems
yet, only trivial issues like wasted CPU cycles on swapoff or reclaiming.
They would fail in some other way, but it is still better to always follow
this convention to make things robust and make later commits easier to do.
Link: https://lkml.kernel.org/r/20250916160100.31545-6-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Chris Li <chrisl@kernel.org> Reviewed-by: Barry Song <baohua@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:49 +0000 (00:00 +0800)]
mm, swap: check page poison flag after locking it
Instead of checking the poison flag only in the fast swap cache lookup
path, always check the poison flags after locking a swap cache folio.
There are two reasons to do so.
The folio is unstable and could be removed from the swap cache anytime, so
it's totally possible that the folio is no longer the backing folio of a
swap entry, and could be an irrelevant poisoned folio. We might
mistakenly kill a faulting process.
And it's totally possible or even common for the slow swap in path
(swapin_readahead) to bring in a cached folio. The cache folio could be
poisoned, too. Only checking the poison flag in the fast path will miss
such folios.
The race window is tiny, so it's very unlikely to happen, though. While
at it, also add a unlikely prefix.
Link: https://lkml.kernel.org/r/20250916160100.31545-5-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:48 +0000 (00:00 +0800)]
mm, swap: fix swap cache index error when retrying reclaim
The allocator will reclaim cached slots while scanning. Currently, it
will try again if reclaim found a folio that is already removed from the
swap cache due to a race. But the following lookup will be using the
wrong index. It won't cause any OOB issue since the swap cache index is
truncated upon lookup, but it may lead to reclaiming of an irrelevant
folio.
This should not cause a measurable issue, but we should fix it.
Link: https://lkml.kernel.org/r/20250916160100.31545-4-ryncsn@gmail.com Fixes: fae859550531 ("mm, swap: avoid reclaiming irrelevant swap cache") Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: Nhat Pham <nphamcs@gmail.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Barry Song <baohua@kernel.org> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kairui Song [Tue, 16 Sep 2025 16:00:47 +0000 (00:00 +0800)]
mm, swap: use unified helper for swap cache look up
The swap cache lookup helper swap_cache_get_folio currently does readahead
updates as well, so callers that are not doing swapin from any VMA or
mapping are forced to reuse filemap helpers instead, and have to access
the swap cache space directly.
So decouple readahead update with swap cache lookup. Move the readahead
update part into a standalone helper. Let the caller call the readahead
update helper if they do readahead. And convert all swap cache lookups to
use swap_cache_get_folio.
After this commit, there are only three special cases for accessing swap
cache space now: huge memory splitting, migration, and shmem replacing,
because they need to lock the XArray. The following commits will wrap
their accesses to the swap cache too, with special helpers.
And worth noting, currently dropbehind is not supported for anon folio,
and we will never see a dropbehind folio in swap cache. The unified
helper can be updated later to handle that.
While at it, add proper kernedoc for touched helpers.
No functional change.
Link: https://lkml.kernel.org/r/20250916160100.31545-3-ryncsn@gmail.com Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Chris Li <chrisl@kernel.org> Acked-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Chris Li <chrisl@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: "Huang, Ying" <ying.huang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kemeng Shi <shikemeng@huaweicloud.com> Cc: kernel test robot <oliver.sang@intel.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chris Li [Tue, 16 Sep 2025 16:00:46 +0000 (00:00 +0800)]
docs/mm: add document for swap table
Patch series "mm, swap: introduce swap table as swap cache (phase I)", v4.
This is the first phase of the bigger series implementing basic
infrastructures for the Swap Table idea proposed at the LSF/MM/BPF topic
"Integrate swap cache, swap maps with swap allocator" [1]. To give credit
where it is due, this is based on Chris Li's idea and a prototype of using
cluster size atomic arrays to implement swap cache.
This phase I contains 15 patches, introduces the swap table infrastructure
and uses it as the swap cache backend. By doing so, we have up to ~5-20%
performance gain in throughput, RPS or build time for benchmark and
workload tests. The speed up is due to less contention on the swap cache
access and shallower swap cache lookup path. The cluster size is much
finer-grained than the 64M address space split, which is removed in this
phase I. It also unifies and cleans up the swap code base.
Each swap cluster will dynamically allocate the swap table, which is an
atomic array to cover every swap slot in the cluster. It replaces the
swap cache backed by XArray. In phase I, the static allocated swap_map
still co-exists with the swap table. The memory usage is about the same
as the original on average. A few exception test cases show about 1%
higher in memory usage. In the following phases of the series, swap_map
will merge into the swap table without additional memory allocation. It
will result in net memory reduction compared to the original swap cache.
Testing has shown that phase I has a significant performance improvement
from 8c/1G ARM machine to 48c96t/128G x86_64 servers in many practical
workloads.
The full picture with a summary can be found at [2]. An older bigger
series of 28 patches is posted at [3].
vm-scability test:
==================
Test with:
usemem --init-time -O -y -x -n 31 1G (4G memcg, PMEM as swap)
Before: After:
System time: 219.12s 158.16s (-27.82%)
Sum Throughput: 4767.13 MB/s 6128.59 MB/s (+28.55%)
Single process Throughput: 150.21 MB/s 196.52 MB/s (+30.83%)
Free latency: 175047.58 us 131411.87 us (-24.92%)
usemem --init-time -O -y -x -n 32 1536M (16G memory, global pressure,
PMEM as swap)
Before: After:
System time: 356.16s 284.68s (-20.06%)
Sum Throughput: 4648.35 MB/s 5453.52 MB/s (+17.32%)
Single process Throughput: 141.63 MB/s 168.35 MB/s (+18.86%)
Free latency: 499907.71 us 484977.03 us (-2.99%)
This shows an improvement of more than 20% improvement in most readings.
Build kernel test:
==================
The following result matrix is from building kernel with defconfig on
tmpfs with ZSWAP / ZRAM, using different memory pressure and setups.
Measuring sys and real time in seconds, less is better (user time is
almost identical as expected):
-j<NR> / Mem | Sys before / after | Real before / after
Using 16G ZRAM with memcg limit:
6 / 192M | 9686 / 9472 -2.21% | 2130 / 2096 -1.59%
12 / 256M | 6610 / 6451 -2.41% | 827 / 812 -1.81%
24 / 384M | 5938 / 5701 -3.37% | 414 / 405 -2.17%
48 / 768M | 4696 / 4409 -6.11% | 188 / 182 -3.19%
With 64k folio:
24 / 512M | 4222 / 4162 -1.42% | 326 / 321 -1.53%
48 / 1G | 3688 / 3622 -1.79% | 151 / 149 -1.32%
With ZSWAP with 3G memcg (using higher limit due to kmem account):
48 / 3G | 603 / 581 -3.65% | 81 / 80 -1.23%
Testing extremely high global memory and schedule pressure: Using ZSWAP
with 32G NVMEs in a 48c VM that has 4G memory, no memcg limit, system
components take up about 1.5G already, using make -j48 to build defconfig:
Before: sys time: 2069.53s real time: 135.76s
After: sys time: 2021.13s (-2.34%) real time: 134.23s (-1.12%)
On another 48c 4G memory VM, using 16G ZRAM as swap, testing make
-j48 with same config:
Before: sys time: 1756.96s real time: 111.01s
After: sys time: 1715.90s (-2.34%) real time: 109.51s (-1.35%)
All cases are more or less faster, and no regression even under extremely
heavy global memory pressure.
Redis / Valkey bench:
=====================
The test machine is a ARM64 VM with 1536M memory 12 cores, Redis is set to
use 2500M memory, and ZRAM swap size is set to 5G:
With BGSAVE enabled, most Redis memory will have a swap count > 1 so swap
cache is heavily in use. We can see a about 6% performance gain. No
BGSAVE is very slightly slower (<0.1%) due to the higher memory pressure
of the co-existence of swap_map and swap table. This will be optimzed
into a net gain and up to 20% gain in BGSAVE case in the following phases.
HDD swap is also ~40% faster with usemem because we removed an old
contention workaround.
GUP no longer uses get_dev_pagemap(). As it was the only user of the
get_dev_pagemap() pgmap caching feature it can be removed.
Link: https://lkml.kernel.org/r/20250903225926.34702-2-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prior to commit aed877c2b425 ("device/dax: properly refcount device dax
pages when mapping") ZONE_DEVICE pages were not fully reference counted
when mapped into user page tables. Instead GUP would take a reference on
the associated pgmap to ensure the results of pfn_to_page() remained
valid.
This is no longer required and most of the code was removed by commit fd2825b0760a ("mm/gup: remove pXX_devmap usage from get_user_pages()").
Finish cleaning this up by removing the dead calls to put_dev_pagemap()
and the temporary context struct.
Link: https://lkml.kernel.org/r/20250903225926.34702-1-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wei Yang [Fri, 5 Sep 2025 14:03:58 +0000 (14:03 +0000)]
mm/page_alloc: check the correct buddy if it is a starting block
find_large_buddy() search buddy based on start_pfn, which maybe different
from page's pfn, e.g. when page is not pageblock aligned, because
prep_move_freepages_block() always align start_pfn to pageblock.
This means when we found a starting block at start_pfn, it may check on
the wrong page theoretically. And not split the free page as it is
supposed to, causing a freelist migratetype mismatch.
The good news is the page passed to __move_freepages_block_isolate() has
only two possible cases:
* page is pageblock aligned
* page is __first_valid_page() of this block
So it is safe for the first case, and it won't get a buddy larger than
pageblock for the second case.
To fix the issue, check the returned pfn of find_large_buddy() to decide
whether to split the free page:
1. if it is not a PageBuddy pfn, no split;
2. if it is a PageBuddy pfn but order <= pageblock_order, no split;
3. if it is a PageBuddy pfn with order > pageblock_order, start_pfn is
either in the starting block or tail block, split the PageBuddy at
pageblock_order level.
Link: https://lkml.kernel.org/r/20250905140358.28849-1-richard.weiyang@gmail.com Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 4 Sep 2025 06:22:58 +0000 (14:22 +0800)]
mm/hwpoison: decouple hwpoison_filter from mm/memory-failure.c
mm/memory-failure.c defines and uses hwpoison_filter_* parameters but the
values of those parameters can only be modified via mm/hwpoison-inject.c
from userspace. They have a potentially different life time. Decouple
those parameters from mm/memory-failure.c to fix this broken layering.
Link: https://lkml.kernel.org/r/20250904062258.3336092-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
huge_memory: return -EINVAL in folio split functions when THP is disabled
split_huge_page_to_list_[to_order](), split_huge_page() and
try_folio_split() return 0 on success and error codes on failure.
When THP is disabled, these functions return 0 indicating success even
though an error code should be returned as it is not possible to split a
folio when THP is disabled.
Make all these functions return -EINVAL to indicate failure instead of 0.
As large folios depend on CONFIG_THP, issue warning as this function
should not be called without a large folio.
Link: https://lkml.kernel.org/r/20250905150012.93714-1-kernel@pankajraghav.com Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509051753.riCeG7LC-lkp@intel.com/ Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: Kiryl Shutsemau <kas@kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Barry Song <baohua@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jinjiang Tu [Thu, 4 Sep 2025 13:27:37 +0000 (21:27 +0800)]
filemap: optimize folio refount update in filemap_map_pages
There are two meaningless folio refcount update for order0 folio in
filemap_map_pages(). First, filemap_map_order0_folio() adds folio
refcount after the folio is mapped to pte. And then, filemap_map_pages()
drops a refcount grabbed by next_uptodate_folio(). We could remain the
refcount unchanged in this case.
As Matthew metenioned in [1], it is safe to call folio_unlock() before
calling folio_put() here, because the folio is in page cache with refcount
held, and truncation will wait for the unlock.
Optimize filemap_map_folio_range() with the same method too.
With this patch, we can get 8% performance gain for lmbench testcase
'lat_pagefault -P 1 file' in order0 folio case, the size of file is 512M.
selftests/mm: split_huge_page_test: cleanups for split_pte_mapped_thp test
There is room for improvement, so let's clean up a bit:
(1) Define "4" as a constant.
(2) SKIP if we fail to allocate all THPs (e.g., fragmented) and add
recovery code for all other failure cases: no need to exit the test.
(3) Rename "len" to thp_area_size, and "one_page" to "thp_area".
(4) Allocate a new area "page_area" into which we will mremap the
pages; add "page_area_size". Now we can easily merge the two
mremap instances into a single one.
(5) Iterate THPs instead of bytes when checking for missed THPs after
mremap.
(6) Rename "pte_mapped2" to "tmp", used to verify mremap(MAP_FIXED)
result.
(7) Split the corruption test from the failed-split test, so we can just
iterate bytes vs. thps naturally.
(8) Extend comments and clarify why we are using mremap in the first
place.
Link: https://lkml.kernel.org/r/20250903070253.34556-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements", v2.
One fix for occasional failures I found while testing and a bunch of
cleanups that should make that test easier to digest.
This patch (of 2):
When checking for actual tail or head pages of a folio, we must make sure
that the KPF_COMPOUND_HEAD/KPF_COMPOUND_TAIL flag is paired with KPF_THP.
For example, if we have another large folio after our large folio in
physical memory, our "pfn_flags & (KPF_THP | KPF_COMPOUND_TAIL)" would
trigger even though it's actually a head page of the next folio.
If is_backed_by_folio() returns a wrong result, split_pte_mapped_thp() can
fail with "Some THPs are missing during mremap".
Fix it by checking for head/tail pages of folios properly. Add
folio_tail_flags/folio_head_flags to improve readability and use these
masks also when just testing for any compound page.
Link: https://lkml.kernel.org/r/20250903070253.34556-1-david@redhat.com Link: https://lkml.kernel.org/r/20250903070253.34556-2-david@redhat.com Fixes: 169b456b0162 ("selftests/mm: reimplement is_backed_by_thp() with more precise check") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Mariano Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Wed, 3 Sep 2025 08:54:24 +0000 (16:54 +0800)]
mm: shmem: fix the strategy for the tmpfs 'huge=' options
After commit acd7ccb284b8 ("mm: shmem: add large folio support for
tmpfs"), we have extended tmpfs to allow any sized large folios, rather
than just PMD-sized large folios.
The strategy discussed previously was:
: Considering that tmpfs already has the 'huge=' option to control the
: PMD-sized large folios allocation, we can extend the 'huge=' option to
: allow any sized large folios. The semantics of the 'huge=' mount option
: are:
:
: huge=never: no any sized large folios
: huge=always: any sized large folios
: huge=within_size: like 'always' but respect the i_size
: huge=advise: like 'always' if requested with madvise()
:
: Note: for tmpfs mmap() faults, due to the lack of a write size hint, still
: allocate the PMD-sized huge folios if huge=always/within_size/advise is
: set.
:
: Moreover, the 'deny' and 'force' testing options controlled by
: '/sys/kernel/mm/transparent_hugepage/shmem_enabled', still retain the same
: semantics. The 'deny' can disable any sized large folios for tmpfs, while
: the 'force' can enable PMD sized large folios for tmpfs.
This means that when tmpfs is mounted with 'huge=always' or
'huge=within_size', tmpfs will allow getting a highest order hint based on
the size of write() and fallocate() paths. It will then try each
allowable large order, rather than continually attempting to allocate
PMD-sized large folios as before.
However, this might break some user scenarios for those who want to use
PMD-sized large folios, such as the i915 driver which did not supply a
write size hint when allocating shmem [1].
Moreover, Hugh also complained that this will cause a regression in userspace
with 'huge=always' or 'huge=within_size'.
So, let's revisit the strategy for tmpfs large page allocation. A simple fix
would be to always try PMD-sized large folios first, and if that fails, fall
back to smaller large folios. This approach differs from the strategy for
large folio allocation used by other file systems, however, tmpfs is somewhat
different from other file systems, as quoted from David's opinion:
: There were opinions in the past that tmpfs should just behave like any
: other fs, and I think that's what we tried to satisfy here: use the write
: size as an indication.
:
: I assume there will be workloads where either approach will be beneficial.
: I also assume that workloads that use ordinary fs'es could benefit from
: the same strategy (start with PMD), while others will clearly not.
Alice Ryhl [Tue, 2 Sep 2025 08:35:13 +0000 (08:35 +0000)]
rust: maple_tree: add MapleTreeAlloc
To support allocation trees, we introduce a new type MapleTreeAlloc for
the case where the tree is created using MT_FLAGS_ALLOC_RANGE. To ensure
that you can only call mtree_alloc_range on an allocation tree, we
restrict thta method to the new MapleTreeAlloc type. However, all methods
on MapleTree remain accessible to MapleTreeAlloc as allocation trees can
use the other methods without issues.
Link: https://lkml.kernel.org/r/20250902-maple-tree-v3-3-fb5c8958fb1e@google.com Signed-off-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Cc: Andreas Hindborg <a.hindborg@kernel.org> Cc: Andrew Ballance <andrewjballance@gmail.com> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Gary Guo <gary@garyguo.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Trevor Gross <tmgross@umich.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alice Ryhl [Tue, 2 Sep 2025 08:35:12 +0000 (08:35 +0000)]
rust: maple_tree: add lock guard for maple tree
To load a value, one must be careful to hold the lock while accessing it.
To enable this, we add a lock() method so that you can perform operations
on the value before the spinlock is released.
This adds a MapleGuard type without using the existing SpinLock type.
This ensures that the MapleGuard type is not unnecessarily large, and that
it is easy to swap out the type of lock in case the C maple tree is
changed to use a different kind of lock.
There are two ways of using the lock guard: You can call load() directly
to load a value under the lock, or you can create an MaState to iterate
the tree with find().
The find() method does not have the mas_ prefix since it's a method on
MaState, and being a method on that struct serves a similar purpose to the
mas_ prefix in C.
Link: https://lkml.kernel.org/r/20250902-maple-tree-v3-2-fb5c8958fb1e@google.com Co-developed-by: Andrew Ballance <andrewjballance@gmail.com> Signed-off-by: Andrew Ballance <andrewjballance@gmail.com> Reviewed-by: Andrew Ballance <andrewjballance@gmail.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Cc: Andreas Hindborg <a.hindborg@kernel.org> Cc: Björn Roy Baron <bjorn3_gh@protonmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Daniel Almeida <daniel.almeida@collabora.com> Cc: Gary Guo <gary@garyguo.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Trevor Gross <tmgross@umich.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alice Ryhl [Tue, 2 Sep 2025 08:35:11 +0000 (08:35 +0000)]
rust: maple_tree: add MapleTree
Patch series "Add Rust abstraction for Maple Trees", v3.
This will be used in the Tyr driver [1] to allocate from the GPU's VA
space that is not owned by userspace, but by the kernel, for kernel GPU
mappings.
Danilo tells me that in nouveau, the maple tree is used for keeping track
of "VM regions" on top of GPUVM, and that he will most likely end up doing
the same in the Rust Nova driver as well.
These abstractions intentionally do not expose any way to make use of
external locking. You are required to use the internal spinlock. For
now, we do not support loads that only utilize rcu for protection.
This contains some parts taken from Andrew Ballance's RFC [2] from April.
However, it has also been reworked significantly compared to that RFC
taking the use-cases in Tyr into account.
This patch (of 3):
The maple tree will be used in the Tyr driver to allocate and keep track
of GPU allocations created internally (i.e. not by userspace). It will
likely also be used in the Nova driver eventually.
This adds the simplest methods for additional and removal that do not
require any special care with respect to concurrency.
This implementation is based on the RFC by Andrew but with significant
changes to simplify the implementation.
Yueyang Pan [Wed, 3 Sep 2025 11:16:14 +0000 (04:16 -0700)]
mm/show_mem: add trylock while printing alloc info
In production, show_mem() can be called concurrently from two different
entities, for example one from oom_kill_process() another from
__alloc_pages_slowpath from another kthread. This patch adds a spinlock
and invokes trylock before printing out the kernel alloc info in
show_mem(). This way two alloc info won't interleave with each other,
which then makes parsing easier.
Link: https://lkml.kernel.org/r/4ed91296e0c595d945a38458f7a8d9611b0c1e52.1756897825.git.pyyjason@gmail.com Signed-off-by: Yueyang Pan <pyyjason@gmail.com> Acked-by: Usama Arif <usamaarif642@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Yueyang Pan [Wed, 3 Sep 2025 11:16:13 +0000 (04:16 -0700)]
mm/show_mem: dump the status of the mem alloc profiling before printing
This patchset fixes two issues we saw in production rollout.
The first issue is that we saw all zero output of memory allocation
profiling information from show_mem() if CONFIG_MEM_ALLOC_PROFILING is set
and sysctl.vm.mem_profiling=0. This cause ambiguity as we don't know what
0B actually means in the output. It can mean either memory allocation
profiling is temporary disabled or the allocation at that position is
actually 0. Such ambiguity will make further parsing harder as we cannot
differentiate between two case.
The second issue is that multiple entities can call show_mem() which
messed up the allocation info in dmesg. We saw outputs like this:
The above example is because one kthread invokes show_mem() from
__alloc_pages_slowpath while kernel itself calls oom_kill_process()
This patch (of 2):
This patch prints the status of the memory allocation profiling before
__show_mem actually prints the detailed allocation info. This way will
let us know the `0B` we saw in allocation info is because the profiling is
disabled or the allocation is actually 0B.
Link: https://lkml.kernel.org/r/cover.1756897825.git.pyyjason@gmail.com Link: https://lkml.kernel.org/r/d7998ea0ddc2ea1a78bb6e89adf530526f76679a.1756897825.git.pyyjason@gmail.com Signed-off-by: Yueyang Pan <pyyjason@gmail.com> Acked-by: Usama Arif <usamaarif642@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
free_pages() is supposed to be called when we only have a virtual address.
__free_pages() is supposed to be called when we have a page.
There are a number of callers that use page_address() to get a page's
virtual address then call free_pages() on it when they should just call
__free_pages() directly.
Add kernel-docs for free_pages() to help callers better understand which
function they should be calling, and replace the obvious cases of misuse.
This patch (of 7):
Add kernel-docs to free_pages(). This will help callers understand when
to use it instead of __free_pages().
Link: https://lkml.kernel.org/r/20250903185921.1785167-1-vishal.moola@gmail.com Link: https://lkml.kernel.org/r/20250903185921.1785167-2-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: SeongJae Park <sj@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Justin Sanders <justin@coraid.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chi Zhiling [Fri, 29 Aug 2025 02:36:59 +0000 (10:36 +0800)]
mpage: convert do_mpage_readpage() to return void type
The return value of do_mpage_readpage() is arg->bio, which is already set
in the arg structure. Returning it again is redundant.
This patch changes the return type to void since the caller doesn't care
about the return value.
Link: https://lkml.kernel.org/r/20250829023659.688649-2-chizhiling@163.com Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Sungjong Seo <sj1557.seo@samsung.com> Cc: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chi Zhiling [Fri, 29 Aug 2025 02:36:58 +0000 (10:36 +0800)]
mpage: terminate read-ahead on read error
For exFAT filesystems with 4MB read_ahead_size, removing the storage
device during read operations can delay EIO error reporting by several
minutes. This occurs because the read-ahead implementation in mpage
doesn't handle errors.
Another reason for the delay is that the filesystem requires metadata to
issue file read request. When the storage device is removed, the metadata
buffers are invalidated, causing mpage to repeatedly attempt to fetch
metadata during each get_block call.
The original purpose of this patch is terminate read ahead when we fail to
get metadata, to make the patch more generic, implement it by checking
folio status, instead of checking the return of get_block().
So, if a folio is synchronously unlocked and non-uptodate, should we quit
the read ahead?
I think it depends on whether the error is permanent or temporary, and
whether further read ahead might succeed. A device being unplugged is one
reason for returning such a folio, but we could return it for many other
reasons (e.g., metadata errors). I think most errors won't be restored in
a short time, so we should quit read ahead when they occur.
Link: https://lkml.kernel.org/r/20250829023659.688649-1-chizhiling@163.com Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Sungjong Seo <sj1557.seo@samsung.com> Cc: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
# echo 3 > /proc/sys/vm/drop_caches
# dd if=test of=/dev/null bs=60k count=1
# ./page-types -r -L -f /mnt/xfs/test
foffset offset flags
0 136048 __RU_l_________H______t_________________F_1
...
c 110a40 __RU_l_________H______t_________________F_1
d 110a41 __RU_l__________T_____t_________________F_1
e 110a42 __RU_l__________T_____t_________________F_1 <-- first read
f 110a43 __RU_l__________T_____t_________________F_1 <-- first readahead flag
10 13e7a8 ___U_l_________H______t_________________F_1
...
20 137a00 ___U_l_________H______t_______P______I__F_1 <-- second readahead flag (20 - 2f)
21 137a01 ___U_l__________T_____t_______P______I__F_1
...
3f 10d4af ___U_l__________T_____t_______P_________F_1
[first readahead: ra_size = 32, req_count = 15, async_size = 17]
When reading 64k data (same for 61-63k range, where last_index is
page-aligned in filemap_get_pages()), 128k readahead is triggered via
page_cache_sync_ra() and the PG_readahead flag is set on the next folio
(the one containing 0x10 page).
When reading 60k data, 128k readahead is also triggered via
page_cache_sync_ra(). However, in this case the readahead flag is set on
the 0xf page. Although the requested read size (req_count) is 60k, the
actual read will be aligned to folio size (64k), which triggers the
readahead flag and initiates asynchronous readahead via
page_cache_async_ra(). This results in two readahead operations totaling
256k.
The root cause is that when the requested size is smaller than the actual
read size (due to folio alignment), it triggers asynchronous readahead.
By changing last_index alignment from page size to folio size, we ensure
the requested size matches the actual read size, preventing the case where
a single read operation triggers two readahead operations.
After applying the patch:
# echo 3 > /proc/sys/vm/drop_caches
# dd if=test of=/dev/null bs=60k count=1
# ./page-types -r -L -f /mnt/xfs/test
foffset offset flags
0 136d4c __RU_l_________H______t_________________F_1
1 136d4d __RU_l__________T_____t_________________F_1
2 136d4e __RU_l__________T_____t_________________F_1
3 136d4f __RU_l__________T_____t_________________F_1
...
c 136bb8 __RU_l_________H______t_________________F_1
d 136bb9 __RU_l__________T_____t_________________F_1
e 136bba __RU_l__________T_____t_________________F_1 <-- first read
f 136bbb __RU_l__________T_____t_________________F_1
10 13c2cc ___U_l_________H______t______________I__F_1 <-- readahead flag
11 13c2cd ___U_l__________T_____t______________I__F_1
12 13c2ce ___U_l__________T_____t______________I__F_1
13 13c2cf ___U_l__________T_____t______________I__F_1
...
1c 1405d4 ___U_l_________H______t_________________F_1
1d 1405d5 ___U_l__________T_____t_________________F_1
1e 1405d6 ___U_l__________T_____t_________________F_1
1f 1405d7 ___U_l__________T_____t_________________F_1
[ra_size = 32, req_count = 16, async_size = 16]
The same phenomenon will occur when reading from 49k to 64k. Set the
readahead flag to the next folio.
Because the minimum order of folio in address_space equals the block size
(at least in xfs and bcachefs that already support bs > ps), having
request_count aligned to block size will not cause overread.
[klarasmodin@gmail.com: fix overflow on 32-bit] Link: https://lkml.kernel.org/r/yru7qf5gvyzccq5ohhpylvxug5lr5tf54omspbjh4sm6pcdb2r@fpjgj2pxw7va
[akpm@linux-foundation.org: update it for Max's constification efforts] Link: https://lkml.kernel.org/r/20250711055509.91587-1-youling.tang@linux.dev Co-developed-by: Chi Zhiling <chizhiling@kylinos.cn> Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn> Signed-off-by: Youling Tang <tangyouling@kylinos.cn> Signed-off-by: Klara Modin <klarasmodin@gmail.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Youling Tang <youling.tang@linux.dev> Cc: David Hildenbrand <david@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Max Kellermann [Mon, 1 Sep 2025 20:50:21 +0000 (22:50 +0200)]
mm: constify highmem related functions for improved const-correctness
Lots of functions in mm/highmem.c do not write to the given pointers and
do not call functions that take non-const pointers and can therefore be
constified.
This includes functions like kunmap() which might be implemented in a way
that writes to the pointer (e.g. to update reference counters or mapping
fields), but currently are not.
kmap() on the other hand cannot be made const because it calls
set_page_address() which is non-const in some
architectures/configurations.
[akpm@linux-foundation.org: "fix" folio_page() build failure] Link: https://lkml.kernel.org/r/20250901205021.3573313-13-max.kellermann@ionos.com Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Zankel <chris@zankel.net> Cc: David Rientjes <rientjes@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Bottomley <james.bottomley@HansenPartnership.com> Cc: Jan Kara <jack@suse.cz> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Nysal Jan K.A" <nysal@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russel King <linux@armlinux.org.uk> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Wei Xu <weixugc@google.com> Cc: Yuanchu Xie <yuanchu@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Max Kellermann [Mon, 1 Sep 2025 20:50:19 +0000 (22:50 +0200)]
mm: constify various inline functions for improved const-correctness
We select certain test functions plus folio_migrate_refs() from
mm_inline.h which either invoke each other, functions that are already
const-ified, or no further functions.
It is therefore relatively trivial to const-ify them, which provides a
basis for further const-ification further up the call stack.
One exception is the function folio_migrate_refs() which does write to the
"new" folio pointer; there, only the "old" folio pointer is being
constified; only its "flags" field is read, but nothing written.
Link: https://lkml.kernel.org/r/20250901205021.3573313-11-max.kellermann@ionos.com Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Zankel <chris@zankel.net> Cc: David Rientjes <rientjes@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Bottomley <james.bottomley@HansenPartnership.com> Cc: Jan Kara <jack@suse.cz> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Nysal Jan K.A" <nysal@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russel King <linux@armlinux.org.uk> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Xu <weixugc@google.com> Cc: Yuanchu Xie <yuanchu@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Max Kellermann [Mon, 1 Sep 2025 20:50:15 +0000 (22:50 +0200)]
mm, s390: constify mapping related test/getter functions
For improved const-correctness.
We select certain test functions which either invoke each other, functions
that are already const-ified, or no further functions.
It is therefore relatively trivial to const-ify them, which provides a
basis for further const-ification further up the call stack.
(Even though seemingly unrelated, this also constifies the pointer
parameter of mmap_is_legacy() in arch/s390/mm/mmap.c because a copy of the
function exists in mm/util.c.)
Link: https://lkml.kernel.org/r/20250901205021.3573313-7-max.kellermann@ionos.com Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Zankel <chris@zankel.net> Cc: David Rientjes <rientjes@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Bottomley <james.bottomley@HansenPartnership.com> Cc: Jan Kara <jack@suse.cz> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Nysal Jan K.A" <nysal@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russel King <linux@armlinux.org.uk> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Xu <weixugc@google.com> Cc: Yuanchu Xie <yuanchu@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Max Kellermann [Mon, 1 Sep 2025 20:50:10 +0000 (22:50 +0200)]
mm: constify shmem related test functions for improved const-correctness
Patch series "mm: establish const-correctness for pointer parameters", v6.
This series is to improved const-correctness in the low-level
memory-management subsystem, which provides a basis for further
constification further up the call stack (e.g. filesystems).
I started this work when I tried to constify the Ceph filesystem code, but
found that to be impossible because many "mm" functions accept non-const
pointers, even though they modify nothing.
This patch (of 12):
We select certain test functions which either invoke each other, functions
that are already const-ified, or no further functions.
It is therefore relatively trivial to const-ify them, which provides a
basis for further const-ification further up the call stack.
Link: https://lkml.kernel.org/r/20250901205021.3573313-1-max.kellermann@ionos.com Link: https://lkml.kernel.org/r/20250901205021.3573313-2-max.kellermann@ionos.com Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Zankel <chris@zankel.net> Cc: David Rientjes <rientjes@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Bottomley <james.bottomley@HansenPartnership.com> Cc: Jan Kara <jack@suse.cz> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Mark Brown <broonie@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: "Nysal Jan K.A" <nysal@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russel King <linux@armlinux.org.uk> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Xu <weixugc@google.com> Cc: Yuanchu Xie <yuanchu@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Wed, 10 Sep 2025 13:39:58 +0000 (21:39 +0800)]
mm: hugeltb: check NUMA_NO_NODE in only_alloc_fresh_hugetlb_folio()
Move the NUMA_NO_NODE check out of buddy and gigantic folio allocation to
cleanup code a bit, also this will avoid NUMA_NO_NODE passed as 'nid' to
node_isset() in alloc_buddy_hugetlb_folio().
Link: https://lkml.kernel.org/r/20250910133958.301467-6-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Wed, 10 Sep 2025 13:39:57 +0000 (21:39 +0800)]
mm: hugetlb: remove struct hstate from init_new_hugetlb_folio()
The struct hstate is never used since commit d67e32f26713 ("hugetlb:
restructure pool allocations”), remove it.
Link: https://lkml.kernel.org/r/20250910133958.301467-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Wed, 10 Sep 2025 13:39:56 +0000 (21:39 +0800)]
mm: hugetlb: directly pass order when allocate a hugetlb folio
Use order instead of struct hstate to remove huge_page_order() call from
all hugetlb folio allocation, also order_is_gigantic() is added to check
whether it is a gigantic order.
Link: https://lkml.kernel.org/r/20250910133958.301467-4-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Wed, 10 Sep 2025 13:39:55 +0000 (21:39 +0800)]
mm: hugetlb: convert to account_new_hugetlb_folio()
In order to avoid the wrong nid passed into the account, and we did make
such mistake before, so it's better to move folio_nid() into
account_new_hugetlb_folio().
Link: https://lkml.kernel.org/r/20250910133958.301467-3-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang [Wed, 10 Sep 2025 13:39:54 +0000 (21:39 +0800)]
mm: hugetlb: convert to use more alloc_fresh_hugetlb_folio()
Patch series "mm: hugetlb: cleanup hugetlb folio allocation", v3.
Some cleanups for hugetlb folio allocation.
This patch (of 3):
Simplify alloc_fresh_hugetlb_folio() and convert more functions to use it,
which help us to remove prep_new_hugetlb_folio() and
__prep_new_hugetlb_folio().
Link: https://lkml.kernel.org/r/20250910133958.301467-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20250910133958.301467-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: show_mem: show number of zspages in show_free_areas
When OOM is triggered, it will show where the pages might be for each
zone. When using zram or zswap, it might look like lots of pages are
missing. After this patch, zspages are shown as below.
Li RongQing [Mon, 1 Sep 2025 08:20:52 +0000 (16:20 +0800)]
mm/hugetlb: retry to allocate for early boot hugepage allocation
In cloud environments with massive hugepage reservations (95%+ of system
RAM), single-attempt allocation during early boot often fails due to
memory pressure.
Commit 91f386bf0772 ("hugetlb: batch freeing of vmemmap pages")
intensified this by deferring page frees, increase peak memory usage
during allocation.
Introduce a retry mechanism that leverages vmemmap optimization reclaim
(~1.6% memory) when available. Upon initial allocation failure, the
system retries until successful or no further progress is made, ensuring
reliable hugepage allocation while preserving batched vmemmap freeing
benefits.
Testing on a 256G machine allocating 252G of hugepages:
Before: 128056/129024 hugepages allocated
After: Successfully allocated all 129024 hugepages
Link: https://lkml.kernel.org/r/20250901082052.3247-1-lirongqing@baidu.com Signed-off-by: Li RongQing <lirongqing@baidu.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Li RongQing <lirongqing@baidu.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kasan: apply write-only mode in kasan kunit testcases
When KASAN is configured in write-only mode, fetch/load operations do not
trigger tag check faults.
As a result, the outcome of some test cases may differ compared to when
KASAN is configured without write-only mode.
Therefore, by modifying pre-exist testcases check the write only makes tag
check fault (TCF) where writing is perform in "allocated memory" but tag
is invalid (i.e) redzone write in atomic_set() testcases. Otherwise check
the invalid fetch/read doesn't generate TCF.
Also, skip some testcases affected by initial value (i.e) atomic_cmpxchg()
testcase maybe successd if it passes valid atomic_t address and invalid
oldaval address. In this case, if invalid atomic_t doesn't have the same
oldval, it won't trigger write operation so the test will pass.
Link: https://lkml.kernel.org/r/20250916222755.466009-3-yeoreum.yun@arm.com Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Breno Leitao <leitao@debian.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: D Scott Phillips <scott@os.amperecomputing.com> Cc: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io> Cc: James Morse <james.morse@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Pankaj Gupta <pankaj.gupta@amd.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "introduce kasan.write_only option in hw-tags", v8.
Hardware tag based KASAN is implemented using the Memory Tagging Extension
(MTE) feature.
MTE is built on top of the ARMv8.0 virtual address tagging TBI (Top Byte
Ignore) feature and allows software to access a 4-bit allocation tag for
each 16-byte granule in the physical address space. A logical tag is
derived from bits 59-56 of the virtual address used for the memory access.
A CPU with MTE enabled will compare the logical tag against the
allocation tag and potentially raise an tag check fault on mismatch,
subject to system registers configuration.
Since ARMv8.9, FEAT_MTE_STORE_ONLY can be used to restrict raise of tag
check fault on store operation only.
Using this feature (FEAT_MTE_STORE_ONLY), introduce KASAN write-only mode
which restricts KASAN check write (store) operation only. This mode omits
KASAN check for read (fetch/load) operation. Therefore, it might be used
not only debugging purpose but also in normal environment.
This patch (of 2):
Since Armv8.9, FEATURE_MTE_STORE_ONLY feature is introduced to restrict
raise of tag check fault on store operation only. Introduce KASAN write
only mode based on this feature.
KASAN write only mode restricts KASAN checks operation for write only and
omits the checks for fetch/read operations when accessing memory. So it
might be used not only debugging enviroment but also normal enviroment to
check memory safty.
This features can be controlled with "kasan.write_only" arguments. When
"kasan.write_only=on", KASAN checks write operation only otherwise KASAN
checks all operations.
This changes the MTE_STORE_ONLY feature as BOOT_CPU_FEATURE like
ARM64_MTE_ASYMM so that makes it initialise in kasan_init_hw_tags() with
other function together.
Link: https://lkml.kernel.org/r/20250916222755.466009-1-yeoreum.yun@arm.com Link: https://lkml.kernel.org/r/20250916222755.466009-2-yeoreum.yun@arm.com Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Breno Leitao <leitao@debian.org> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: D Scott Phillips <scott@os.amperecomputing.com> Cc: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io> Cc: James Morse <james.morse@arm.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: levi.yun <yeoreum.yun@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Pankaj Gupta <pankaj.gupta@amd.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
block: update comment of "struct bio_vec" regarding nth_page()
Ever since commit 858c708d9efb ("block: move the bi_size update out of
__bio_try_merge_page"), page_is_mergeable() no longer exists, and the
logic in bvec_try_merge_page() is now a simple page pointer comparison.
We want to get rid of nth_page(), and kfence init code is the last user.
Unfortunately, we might actually walk a PFN range where the pages are not
contiguous, because we might be allocating an area from memblock that
could span memory sections in problematic kernel configs (SPARSEMEM
without SPARSEMEM_VMEMMAP).
We could check whether the page range is contiguous using
page_range_contiguous() and failing kfence init, or making kfence
incompatible these problemtic kernel configs.
Let's keep it simple and simply use pfn_to_page() by iterating PFNs.
Link: https://lkml.kernel.org/r/20250901150359.867252-36-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/gup: drop nth_page() usage in unpin_user_page_range_dirty_lock()
There is the concern that unpin_user_page_range_dirty_lock() might do some
weird merging of PFN ranges -- either now or in the future -- such that
PFN range is contiguous but the page range might not be.
Let's sanity-check for that and drop the nth_page() usage.
It's no longer required to use nth_page() when iterating pages within a
single SG entry, so let's drop the nth_page() usage.
Link: https://lkml.kernel.org/r/20250901150359.867252-34-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / thirdparty / kernel / stable.git / log
