This patch add a optimized llround/llroundf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized llrint/llrintf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized finite/finitef implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized isinf/isinff implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
This patch add a optimized isnan/isnanf implementation for POWER8
using the new Move From VSR Doubleword instruction to gains some
cycles from FP to GRP register move.
Joey Ye [Thu, 27 Feb 2014 17:44:43 +0000 (17:44 +0000)]
Fix ARM NAN fraction bits.
Current ARM soft-float implementation is violating the RTABI
(http://infocenter.arm.com/help/topic/com.arm.doc.ihi0043d/IHI0043D_rtabi.pdf)
Section 4.1.1.1:
When not otherwise specified by IEEE 754, the result on an invalid
operation should be the quiet NaN bit pattern with only the most
significant bit of the significand set, and all other significand bits
zero.
This patch fixes it by setting _FP_NANFRAC_* to zero.
Ran make check test with -mfloat-abi=soft. No regression.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_NANFRAC_S, _FP_NANFRAC_D)
(_FP_NANFRAC_Q): Set to zero.
In 84ba214c, I removed some redundant sign computations and in the
process, I incorrectly got rid of a temporary variable, thus passing
the absolute value of the input to bsloww1. This caused #16623.
Joseph Myers [Thu, 27 Feb 2014 03:25:27 +0000 (03:25 +0000)]
Support expected failures in .test-result files.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00195.html>, makes it
possible for .test-result files for individual tests to contain XPASS
and XFAIL rather than PASS and FAIL in cases where failure is
expected. This replaces the marking of two individual tests with "-"
to cause them to be expected at makefile level to fail;
evaluate-test.sh will ensure it exits with status 0 for an expected
failure.
Tested x86_64.
* scripts/evaluate-test.sh: Take new argument indicating whether
failure is expected.
* Makeconfig (evaluate-test): Pass argument to evaluate-test.sh
indicating whether failure is expected.
* conform/Makefile (test-xfail-run-conformtest): New variable.
($(objpfx)run-conformtest.out): Don't expect to fail at makefile
level.
* posix/Makefile (test-xfail-annexc): New variable.
($(objpfx)annexc.out): Don't expect to fail at makefile level.
Joseph Myers [Wed, 26 Feb 2014 23:12:03 +0000 (23:12 +0000)]
Consistently include Makeconfig after defining subdir.
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
Steve Ellcey [Wed, 26 Feb 2014 22:19:20 +0000 (14:19 -0800)]
Add macros and inline functions to mips math_private.h file.
This is a patch to the MIPS math_private.h file to define HAVE_RM_CTX and
implement the ctx macros. I also defined a few other macros and inline
functions that I skipped the first time.
Carlos O'Donell [Wed, 26 Feb 2014 16:03:24 +0000 (11:03 -0500)]
Add a new "Inter-Process Communication" chapter.
This patch adds a new "Inter-Process Communication"
chapter to cover the sem*, msg*, and shm* functions.
Initially we document only the sem* function signatures
and their safety notes.
Ondřej Bílka [Wed, 26 Feb 2014 12:13:09 +0000 (13:13 +0100)]
Simplify calloc implementation.
To make future improvements of allocator simpler we could for now calloc
just call malloc and memset. With that we could omit a changes that
would duplicate malloc changes anyway.
Carlos O'Donell [Tue, 25 Feb 2014 18:23:25 +0000 (13:23 -0500)]
BZ #16632: Change [_BSD/_SVID]_SOURCE warning.
Source packages that need to support both 2.19 and
2.20 will need to decide to use _BSD_SOURCE and
_SVID_SOURCE vs. _DEFAULT_SOURCE.
The difficulty in making that decision is that
__GLIBC_MINOR__ is itself defined in features.h,
but you want to set the feature test macros before
including features.h.
Therefore to ease the transition we should disable
the warning if _DEFAULT_SOURCE is also defined.
Carlos O'Donell [Tue, 25 Feb 2014 18:00:36 +0000 (13:00 -0500)]
BZ #16613: Support TLS in audit libraries.
This commit fixes a bug where the dynamic loader would crash
when loading audit libraries, via LD_AUDIT, where those libraries
used TLS. The dynamic loader was not considering that the audit
libraries would use TLS and failed to bump the TLS generation
counter leaving TLS usage inconsistent after loading the audit
libraries.
Florian Weimer [Tue, 25 Feb 2014 13:56:10 +0000 (14:56 +0100)]
misc/sys/select.h (__FD_MASK): Avoid signed integer overflow.
Shifting into the sign position is currently supported as a GCC
extension, but explicitly subjected to future changes. Computation
in the unsigned type followed by a cast to the signed type is a GCC
extension that will be available forever.
Will Newton [Mon, 27 Jan 2014 09:01:03 +0000 (09:01 +0000)]
ARM: Add SystemTap probes to longjmp and setjmp.
Now the ARM port implements pointer encryption for jmpbufs, gdb needs
a SystemTap probe point in longjmp to determine the target PC of
a call to longjmp. This patch implements the probe point in longjmp
and a similar probe point in setjmp.
In order to have all the appropriate registers available to pass to the
probe this reorders the layout of jmpbuf, putting the sp and lr registers
at the start rather than the end, allowing them to be read and
written sequentially.
Tested on armv7, no new failures in the glibc testsuite and confirmed
that this fixes the gdb.base/longjmp.exp failures in the gdb testsuite.
ChangeLog:
2014-02-25 Will Newton <will.newton@linaro.org>
* sysdeps/arm/__longjmp.S: Include stap-probe.h.
(__longjmp): Restore sp and lr before restoring callee
saved registers. Add longjmp and longjmp_target
SystemTap probe point.
* sysdeps/arm/bits/setjmp.h (__jmp_buf): Update comment.
* sysdeps/arm/include/bits/setjmp.h (__JMP_BUF_SP):
Define to zero to match jmpbuf layout.
* sysdeps/arm/setjmp.S: Include stap-probe.h.
(__sigsetjmp): Save sp and lr before saving callee
saved registers. Add setjmp SystemTap probe point.
Joseph Myers [Fri, 21 Feb 2014 21:48:08 +0000 (21:48 +0000)]
Generate .test-result files for tests with special rules.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now
proposed for inclusion in glibc, extends the generation of PASS and
FAIL status in .test-result files for individual tests to cover tests
with their own custom makefile rules. This is just adding
$(evaluate-test) calls to all such rules, since tests with multiple
commands were previously split into separate tests.
Note that the tests the makefiles expect to fail (posix/annexc and
conformtest) currently get FAIL listed in the .test-result file,
rather than XFAIL; a subsequent patch will introduce a better XFAIL
mechanism.
This patch completes the headers cleanup consequent on removal of
_BSD_SOURCE and _SVID_SOURCE (apart from any subsequent deprecations):
* #endif conditionals that referred to BSD or SVID are updated.
* Redundant __USE_* tests in cases involving __USE_MISC are removed.
This includes cases such as __USE_MISC || __USE_ISOC99, where
__USE_MISC is redundant (because __USE_MISC is only ever defined in
the default / _DEFAULT_SOURCE / _GNU_SOURCE case, when __USE_ISOC99
is also defined; the same applies to the non-XSI-extended POSIX
versions), and cases involving __USE_GNU, where __USE_GNU is
redundant (because if __USE_GNU is defined, so are the other __USE_*
macros). There may well be other cases of __USE_FOO || __USE_BAR
tests that could be simplified because one macro implies the other;
this patch only addresses cases involving __USE_MISC.
Adam Conrad [Fri, 21 Feb 2014 07:24:03 +0000 (00:24 -0700)]
Allow sys/auxv.h to be used from the testsuite on powerpc and sparc.
elf/tst-auxv.c includes misc/sys/auxv.h, which ends up not actually
being included due to the guard overlap, and getauxval becomes an
implicit declaration and implicit pointer conversion which means, at
best, the test isn't actually testing what it thinks it is and, at
worst, it'll crash and burn on platforms where implict pointer
conversion is a Very Bad Thing.
* sysdeps/powerpc/bits/hwcap.h: Allow _SYSDEPS_SYSDEP_H guard as a
synonym for _SYS_AUXV_H to allow direct inclusion.
* sysdeps/sparc/bits/hwcap.h: Likewise.
* sysdeps/powerpc/sysdep.h: Define _SYSDEPS_SYSDEP_H instead of
_SYS_AUXV_H so we can include sysdep.h and sys/auxv.h together.
* sysdeps/sparc/sysdep.h: Likewise.
Joseph Myers [Thu, 20 Feb 2014 17:55:35 +0000 (17:55 +0000)]
Fix __ASSUME_SENDMMSG issues (bug 16611).
Similar to the issues for accept4 and recvmmsg, __ASSUME_SENDMMSG is
also confused about whether it relates to function availability or
socketcall operation availability, and the conditions for the
definition are always wrong (sendmmsg appeared in Linux kernel 3.0,
not 2.6.39); this is now bug 16611.
This patch splits the macro into separate macros like those for
accept4 and recvmmsg, defining them for appropriate kernel versions.
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
Joseph Myers [Thu, 20 Feb 2014 17:53:08 +0000 (17:53 +0000)]
Fix __ASSUME_RECVMMSG issues (bug 16610).
Similar to the issues for accept4, __ASSUME_RECVMMSG is also confused
about whether it relates to function availability or socketcall
operation availability; this is now bug 16610.
Nothing actually tests __ASSUME_RECVMMSG for function availability,
but implicit in the definition in kernel-features.h is the idea that
it makes sense when the syscall is available and socketcall is not
being used. As with accept4, there are architectures where the
syscall was added later than the socketcall operation, meaning that
assuming glibc is built with recent enough kernel headers, it does not
attempt to use socketcall for these operations and __ASSUME_RECVMMSG
gets defined for kernels >= 2.6.33 even when the syscall was only
added later.
This patch splits the macro into separate macros like those used for
accept4; having similar macro structure in both cases (and for
sendmmsg once I've dealt with that) seems likely to be less confusing
than having a different structure on the basis of nothing actually
needing to assume the recvmmsg function works. Appropriate
definitions are added for all architectures.
Architecture-specific note: Tile's kernel-features.h says "TILE glibc
support starts with 2.6.36", which is accurate in that 2.6.36 was the
first kernel version with Tile support, and on that basis I've made
that header define __ASSUME_RECVMMSG_SYSCALL unconditionally.
However, Tile's configure.ac has arch_minimum_kernel=2.6.32. Since
arch_minimum_kernel is meant to reflect only kernel.org kernel
versions, I think that should change to 2.6.36. (If using glibc with
kernel versions from before a port went in kernel.org, it's your
responsibility to change arch_minimum_kernel in a local patch, and at
the same time to adjust any __ASSUME_* definitions that may not be
correct for your older kernel; for developing the official glibc it
should only ever be necessary to consider what official kernel.org
releases support.)
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
Joseph Myers [Thu, 20 Feb 2014 17:50:31 +0000 (17:50 +0000)]
Fix __ASSUME_ACCEPT4 issues (bug 16609).
In <https://sourceware.org/ml/libc-alpha/2013-12/msg00008.html>,
Aurelien noted issues with the definition of __ASSUME_ACCEPT4, which I
discussed in more detail in
<https://sourceware.org/ml/libc-alpha/2013-12/msg00014.html>; these
are now bug 16609.
As previously noted, __ASSUME_ACCEPT4 is used in two ways:
* In OS-independent code, to mean "accept4 can be assumed to work
rather than fail with ENOSYS". It doesn't matter whether it's
implemented with socketcall or a separate syscall.
* In Linux-specific code, to mean "the socketcall multiplex syscall
can be assumed to handle the accept4 operation. When used in
Linux-specific code, it *never* refers to anything relating to the
accept4 syscall, only to the socketcall multiplexer.
This patch splits the macro into separate __ASSUME_ACCEPT4_SOCKETCALL,
__ASSUME_ACCEPT4_SYSCALL and __ASSUME_ACCEPT4 to clarify the different
cases involved. A macro __ASSUME_SOCKETCALL is added for convenience
in writing logic relating to all socketcall architectures. In
addition, to address the issue of architectures where socketcall
support for accept4 was added before a separate syscall was added (and
so the separate syscall should not be used unless known to be present
or fallback to socketcall is available), a fourth macro
__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL is added to indicate that the
syscall became available at the same time as socketcall support. This
is then used in the relevant places in a conditional determining
whether to undefine __NR_accept4 (the simple approach to avoiding the
syscall's presence causing problems; I didn't try to implement runtime
fallback from the syscall to socketcall).
Architecture-specific note: alpha defined __ASSUME_ACCEPT4 for 2.6.33
and later, but actually the syscall was added for alpha in 3.2, so
this patch uses the correct condition for __ASSUME_ACCEPT4_SYSCALL
there.
Tested x86_64, including that disassembly of the installed shared
libraries is unchanged by this patch.
Joseph Myers [Wed, 19 Feb 2014 14:26:29 +0000 (14:26 +0000)]
Move tests of clog10 from libm-test.inc to auto-libm-test-in.
This patch moves tests of clog10 to auto-libm-test-in. Note that this
means gen-auto-libm-tests will now depend on the recent MPC 1.0.2
release which added a fix for a bug that made gen-auto-libm-tests hang
for clog10. (It still can't conveniently be used for cacos cacosh
casin casinh catan catanh csin csinh because of extreme slowness of
those functions for special cases in MPC; at least some slow cases of
csin / csinh are fixed in MPC trunk, but not in a release.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of clog10.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (clog10_test_data): Use AUTO_TESTS_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Joseph Myers [Tue, 18 Feb 2014 21:48:51 +0000 (21:48 +0000)]
Move tests of fma from libm-test.inc to auto-libm-test-in.
This patch moves tests of fma to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Because fma can have exact zero results depending on the rounding
mode, results of fma cannot always be determined from a single value
computed in higher precision with a sticky bit. Thus, this patch adds
support for recomputing results with the original MPFR/MPC function in
the case where an exact zero is involved. (This also affects some
results for cpow; when we start testing cpow in all rounding modes, I
think it will be most appropriate to make those tests use
IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs
of zero results, or special caes in general, for cpow, and I think
signs of zero for cpow are beyond the scope of glibc's accuracy
goals.)
Simply treating the existing test inputs for fma like those for other
functions (i.e., as representing the given value rounded up or down to
any of the supported floating-point formats) increases the size of
auto-libm-test-out by about 16MB (i.e., about half the file is fma
test data). While rounded versions of tests are perfectly reasonable
test inputs for fma, in this case having them seems excessive, so this
patch allows functions to specify in gen-auto-libm-tests that the
given test inputs are only to be interpreted exactly, not as
corresponding to values rounded up and down. This reduces the size of
the generated test data for fma to a more reasonable 2MB.
A consequence of this patch is that fma is now tested for correct
presence or absence of "inexact" exceptions, where previously this
wasn't tested because I didn't want to try to add that test coverage
manually to all the existing tests. As far as I know, the existing
fma implementations are already correct in this regard.
This patch provides the first cases where the gen-auto-libm-tests
support for distinguishing before-rounding/after-rounding underflow
actually produces separate entries in auto-libm-test-out (for
functions without exactly determined results, the affected cases are
all considered underflow-optional, so this only affects functions like
fma with exactly determined results). I didn't see any signs of
problems with this logic in the output.
Tested x86_64 and x86.
* math/auto-libm-test-in: Add tests of fma.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f.
(fma_towardzero_test_data): Likewise.
(fma_downward_test_data): Likewise.
(fma_upward_test_data): Likewise.
* math/gen-auto-libm-tests.c (rounding_mode_desc): Add field
mpc_mode.
(rounding_modes): Add values for new field.
(func_calc_method): Add value mpfr_fff_f.
(func_calc_desc): Add mpfr_fff_f union field.
(test_function): Add field exact_args.
(FUNC): Add macro argument EXACT_ARGS.
(FUNC_mpfr_f_f): Update call to FUNC.
(FUNC_mpfr_f_f): Likewise.
(FUNC_mpfr_ff_f): Likewise.
(FUNC_mpfr_if_f): Likewise.
(FUNC_mpc_c_f): Likewise.
(FUNC_mpc_c_c): Likewise.
(test_functions): Add fma. Update calls to FUNC.
(handle_input_arg): Add argument exact_args.
(add_test): Update call to handle_input_arg.
(calc_generic_results): Add argument mode. Handle mpfr_fff_f.
(output_for_one_input_case): Update call to calc_generic_results.
Recalculate exact zero results in each rounding mode.
Joseph Myers [Tue, 18 Feb 2014 14:45:41 +0000 (14:45 +0000)]
Fix gen-auto-libm-tests sticky bit setting for negative results.
gen-auto-libm-tests has a bug in the logic for setting a sticky bit
based on the ternary value from MPFR: it is correct for positive
results, but for negative results mpz_setbit acts as if a two's
complement representation is used, whereas the low bit needs setting
based on the sign-magnitude representation GMP actually uses. (This
showed up in converting fma tests to use auto-libm-test-in /
gen-auto-libm-tests.)
This patch fixes the problem by negating the mpz_t value to set its
low bit. There are lots of changes to auto-libm-test-out (mainly 1ulp
fixes to ldbl-128 expected results), but only a few ulps updates are
needed on x86 / x86_64. In one case, a corrected expectation showed
up a spurious underflow exception where the correct result is slightly
outside the underflowing range.
Tested x86_64 and x86 and ulps updated accordingly.
* math/gen-auto-libm-tests.c (adjust_real): Ensure integers are
non-negative before setting low bit.
* math/auto-libm-test-in: Mark one asin test possibly having
spurious underflow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
Tomas Dohnalek [Sat, 15 Feb 2014 01:04:57 +0000 (01:04 +0000)]
Generate .test-result files for ordinary tests.
This patch, an updated version of
<https://sourceware.org/ml/libc-alpha/2014-01/msg00193.html>, starts
the process of generating explicit PASS or FAIL status for individual
glibc tests. It's based on Tomas Dohnalek's patch
<https://sourceware.org/ml/libc-alpha/2012-10/msg00278.html>, but is
deliberately more minimal: it doesn't try to cover any tests outside
of $(tests) / $(xtests) (that's for a later patch), nor does it put
the result together in an overall summary file (again, a later patch):
it just generates the .test-result files.
Thus, this patch keeps the overall logic for when a testsuite run
finishes completely unchanged: a test failing will terminate the run.
I think we *should* move to a more conventional approach where plain
"make check" does not terminate for an individual test failure, unless
e.g. you say "make stop-on-test-failure=y check", but that sort of
policy change is best done as a separate patch once the infrastructure
is in place to generate summary files for completed test runs (which
will entirely consist of PASS and XFAIL lines if the testsuite run
reaches the point of generating them, until such a policy change is
made).
Tested x86_64.
2014-02-14 Tomas Dohnalek <tdohnale@redhat.com>
Joseph Myers <joseph@codesourcery.com>
* Makeconfig (test-name): New variable.
(evaluate-test): Likewise.
* Makerules (do-test-clean): Remove .test-result files.
(common-mostlyclean): Likewise.
* Rules ($(objpfx)%.out): Use $(evaluate-test) in both rules.
* scripts/evaluate-test.sh: New file.
Joseph Myers [Fri, 14 Feb 2014 13:45:14 +0000 (13:45 +0000)]
Split up rules for tests using mtrace and something else.
Most glibc tests that use mtrace to verify that there were no memory
leaks from the glibc facilities used in a given test depend on the
.out file of the previous test so that the mtrace test runs mtrace and
nothing else.
Two, however, have a single target combining mtrace with something
else. In the case of libio/tst-fopenloc.check, the test both compares
the output with an expected baseline and runs mtrace. In the case of
posix/tst-rxspencer-mem, the test is run (with different command line
from the main run) and then mtrace is run, from the same makefile
target.
This patch splits both of these tests up to use separate makefile
targets for each thing tested; in the tst-rxspencer case, a file
tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c,
as is usual for tests where the same code gets tested in different
compile-time or runtime configurations.
Adding $(evaluate-test) to test commands, as in
<https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no
longer need to insert && between multiple commands, as all tests will
either have just a single command or already use &&.
Tested x86_64.
* libio/Makefile ($(objpfx)tst-fopenloc.check): Split into
separate $(objpfx)tst-fopenloc-cmp.out and
$(objpfx)tst-fopenloc-mem.out targets.
(tests): Update dependencies.
* posix/Makefile (tests variable): Add tst-rxspencer-no-utf8.
(generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to
tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace.
(tst-rxspencer-no-utf8-ARGS): New variable.
(tst-rxspencer-no-utf8-ENV): Likewise.
(tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem
instead of $(objpfx)tst-rxspencer-mem.
($(objpfx)tst-rxspencer-mem): Change target to
$(objpfx)tst-rxspencer-no-utf8-mem. Depend on
$(objpfx)tst-rxspencer-no-utf8.out instead of running test program.
* posix/tst-rxspencer-no-utf8.c: New file.
Joseph Myers [Fri, 14 Feb 2014 13:42:44 +0000 (13:42 +0000)]
Split up rules for tests that compare output with baselines.
This patch splits makefile rules that generate a file then run cmp to
check the contents of that file into separate rules to generate and
compare the file. This simplifies making those tests generate PASS /
FAIL results, by removing the need to insert && between commands in
the test so that a $(evaluate-test) call is reached. It also avoids
the oddity of the .out file being an intermediate file rather than the
final result generated, as noted for some of these tests in
<https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>.
In many cases, the rule to run the program was no longer needed
because the default rules for running test programs on the host to
generate a .out file sufficed. (I'm not asserting the commands run
after this patch are *exactly* the same as before, simply that the
rules did nothing special that appeared deliberate or relevant to
anything about what the tests were testing. In cases where the rules
redirected stderr as well as stdout, I left the existing rule's
redirection in place to avoid changing what gets compared with the
expected results.)
It's clear there is a lot in common between the various -cmp.out rules
and it might be possible in future to refactor them into more generic
support for the case of comparing test output against a baseline.
(Some baselines are *.exp, some *.expect, some directly embedded in
the makefiles, and nptl/tst-cleanupx0.expect appears unused.)
Tested x86_64.
* elf/Makefile ($(objpfx)order.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order-cmp.out.
($(objpfx)order-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out,
$(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out,
$(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and
$(objpfx)tst-array5-static-cmp.out.
($(objpfx)tst-array1.out): Remove rule.
($(objpfx)tst-array1-cmp.out): New rule.
($(objpfx)tst-array1-static.out): Remove rule.
($(objpfx)tst-array1-static-cmp.out): New rule.
($(objpfx)tst-array2.out): Remove rule.
($(objpfx)tst-array2-cmp.out): New rule.
($(objpfx)tst-array3.out): Remove rule.
($(objpfx)tst-array3-cmp.out): New rule.
($(objpfx)tst-array4.out): Remove rule.
($(objpfx)tst-array4-cmp.out): New rule.
($(objpfx)tst-array5.out): Remove rule.
($(objpfx)tst-array5-cmp.out): New rule.
($(objpfx)tst-array5-static.out): Remove rule.
($(objpfx)tst-array5-static-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)order2-cmp.out.
($(objpfx)order2.out): Remove rule.
($(objpfx)order2-cmp.out): New rule.
($(objpfx)tst-initorder.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder-cmp.out.
($(objpfx)tst-initorder-cmp.out): New rule.
($(objpfx)tst-initorder2.out): Remove rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-initorder2-cmp.out.
($(objpfx)tst-initorder2-cmp.out): New rule.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-unused-dep-cmp.out.
($(objpfx)tst-unused-dep-cmp.out): Do not run cmp.
($(objpfx)tst-unused-dep-cmp.out): New rule.
* stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend
on $(objpfx)tst-setvbuf1-cmp.out.
($(objpfx)tst-setvbuf1.out): Do not run cmp.
($(objpfx)tst-setvbuf1-cmp.out): New rule.
* string/Makefile [$(run-built-tests) = yes] (tests): Depend
$(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out.
($(objpfx)tst-svc.out): Remove rule.
($(objpfx)tst-svc-cmp.out): New rule.
nptl:
* Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp.
[$(run-built-tests) = yes] (tests): Depend on
$(objpfx)tst-cleanup0-cmp.out.
($(objpfx)tst-cleanup0-cmp.out): New rule.
Joseph Myers [Thu, 13 Feb 2014 22:07:25 +0000 (22:07 +0000)]
Clean up trivially redundant __USE_MISC conditionals.
This patch cleans up cases of __USE_MISC that are trivially redundant
after the recent substitution of __USE_MISC for __USE_BSD and
__USE_SVID: either in constructs such as "defined __USE_MISC ||
defined __USE_MISC", or else (in the bits/mman.h case) a conditional
on __USE_MISC nested inside another __USE_MISC conditional. (The
cleanups remaining after this patch are still quite large, but it
seems a reasonable piece to separate out.)
Joseph Myers [Thu, 13 Feb 2014 00:46:45 +0000 (00:46 +0000)]
Update MIPS math-tests.h for GCC 4.9 using soft-fp.
GCC trunk now uses soft-fp for MIPS64 long double, so supporting
integration with hardware exceptions and rounding modes. This patch
updates MIPS math-tests.h accordingly not to disable exception and
rounding mode tests in this case.
Tested mips64 and ulps updated to reflect the newly run tests.
Joseph Myers [Wed, 12 Feb 2014 23:41:01 +0000 (23:41 +0000)]
Combine __USE_BSD and __USE_SVID into __USE_MISC.
This patch cleans up following the obsoletion of _BSD_SOURCE and
_SVID_SOURCE by combining __USE_BSD and __USE_SVID into __USE_MISC.
The only non-mechanical part of this patch is the changes to
features.h; everything else is simple substitution of __USE_MISC for
the old macros. Thus, this patch leaves obviously redundant
conditionals such as "defined __USE_MISC || defined __USE_MISC", and
does not update #endif comments where they referred to BSD or SVID in
words instead of the literal macro name. This is intended to
facilitate patch review by separating the less mechanical changes from
these purely mechanical changes into a separate patch. (I do intend
to integrate all the changes from
<https://sourceware.org/ml/libc-alpha/2013-12/msg00226.html>, which I
believe includes all the trailing comment updates, in subsequent
patches.)
Joseph Myers [Wed, 12 Feb 2014 23:37:13 +0000 (23:37 +0000)]
Remove reference to subdir_lint.out.
The toplevel Makefile's subdir_targets variable refers to
subdir_lint.out. As far as I can tell, this is not defined or
referenced anywhere else in the tree. Having .out makefile references
that don't refer to the output from testcases seems confusing; this
patch removes the reference to subdir_lint.out.
Joseph Myers [Wed, 12 Feb 2014 22:19:20 +0000 (22:19 +0000)]
Remove indirection in stdio-common tests dependencies.
stdio-common/Makefile has the tests target depend on two test output
files indirectly through rules do-tst-unbputc and do-tst-printf. I
see no reason for such an indirection, and everywhere else the tests
just depend on the output files directly, so this patch removes the
indirection.
Tested x86_64.
* stdio-common/Makefile (do-tst-unbputc): Remove target.
(do-tst-printf): Likewise.
(tests): Depend directly on $(objpfx)tst-unbputc.out and
$(objpfx)tst-printf.out.
Joseph Myers [Wed, 12 Feb 2014 20:52:19 +0000 (20:52 +0000)]
Stop io/ftwtest deleting its own output.
If you rerun "make check" in a tree where some tests have already been
run, it will rerun io/ftwtest-sh because that test uses ftwtest.out,
the same name to which output is redirected, as its internal temporary
file, and then removes it on exit.
Clearly tests should not be removing the files to which their output
is redirected like that. This patch changes the script to use a
different file as its internal temporary file, so the actual output
referenced in the makefile isn't removed.
Tested x86_64.
* io/ftwtest-sh (testout): Change to $tmp/ftwtest-tmp.out.
Joseph Myers [Wed, 12 Feb 2014 20:51:13 +0000 (20:51 +0000)]
Make ABI tests generate .out files.
If you rerun "make check" in a tree where some tests have already been
run, it will rerun ABI tests because those do not create an output
file.
This patch changes those tests to create .out files so they only get
rerun if the dependencies (on the ABI baselines and the generated
.symlist files) indicate they should be rerun.
Tested x86_64.
* Makerules (check-abi-%): Change target to
$(objpfx)check-abi-%.out.
(check-abi target): Update dependencies.
(check-abi-pattern variable): Redirect output of diff to $@.
(check-abi variable): Likewise.
* elf/Makefile (check-abi): Update dependencies.
Joseph Myers [Wed, 12 Feb 2014 18:27:12 +0000 (18:27 +0000)]
soft-fp: support after-rounding tininess detection.
IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
Also fixed the following whitespace nits to satisfy the push:
sysdeps/alpha/alphaev6/memset.S:142: space before tab in indent.
sysdeps/alpha/configure:1: new blank line at EOF.
sysdeps/alpha/fpu/e_sqrt.c:126: space before tab in indent.
sysdeps/alpha/preconfigure:1: new blank line at EOF.
sysdeps/unix/sysv/linux/alpha/syscalls.list:1: new blank line at EOF.
Joseph Myers [Tue, 11 Feb 2014 23:40:07 +0000 (23:40 +0000)]
Remove _BSD_SOURCE and _SVID_SOURCE.
This is a minimal patch to remove _BSD_SOURCE and _SVID_SOURCE from
the documented user API, making them into aliases for _DEFAULT_SOURCE
with a #warning given, but keeping most of the features.h logic using
those macros and all the exising __USE_* conditionals, on the basis
that all the consequent cleanups will go in followup patches.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros.
[_BSD_SOURCE || _SVID_SOURCE]: Give #warning. Define
_DEFAULT_SOURCE.
* manual/creature.texi (_BSD_SOURCE): Remove documentation.
(_SVID_SOURCE): Likewise.
(_DEFAULT_SOURCE): Update description of default features.
(Feature Test Macros): Don't mention _SVID_SOURCE in conjunction
with _GNU_SOURCE.
* manual/filesys.texi (__ftw_func_t): Do not refer to _BSD_SOURCE.
(S_ISVTX): Likewise.
* manual/math.texi (Mathematical Constants): Likewise.
* manual/signal.texi (Interrupted Primitives): Likewise.
* manual/startup.texi (putenv): Do not refer to _SVID_SOURCE.
* math/test-matherr.c (_SVID_SOURCE): Do not define.
* sysvipc/sys/ipc.h [__USE_SVID && !__USE_XOPEN && __GNUC__ >= 2]:
Don't refer to _SVID_SOURCE in warning text.
Joseph Myers [Tue, 11 Feb 2014 22:33:07 +0000 (22:33 +0000)]
Merge MIPS dl-lookup.c into generic file.
MIPS has its own version of dl-lookup.c to deal with differences
between undefined symbol semantics in the PIC and non-PIC ABIs. This
is often liable to get out of date with respect to the generic file
(for example, the recent __builtin_expect changes didn't cover ports,
and it's not obvious to anyone changing dl-lookup.c that there would
be architecture-specific versions).
This patch adds a macro that dl-machine.h can define that is used in
the appropriate place in dl-lookup.c, so that MIPS no longer needs its
own version of that file.
Tested for mips64 that the only changes to disassembly of installed
shared libraries appear to be ld.so changes attributable to different
line numbers and paths in assertions.
* elf/dl-lookup.c (ELF_MACHINE_SYM_NO_MATCH): Define if not
already defined.
(do_lookup_x): Use ELF_MACHINE_SYM_NO_MATCH.
* sysdeps/mips/dl-lookup.c: Remove.
* sysdeps/mips/dl-machine.h (ELF_MACHINE_SYM_NO_MATCH): New macro.
The README is updated and I've updated ChangeLog.aarch64 along the
lines of the ARM move. The AArch64 build has been tested to confirm
that there were no changes in objdump -dr output or the shared
objects.
Will Newton [Tue, 28 Jan 2014 14:26:38 +0000 (14:26 +0000)]
include/stap-probe.h: Add comment about SystemTap argument format
Add a comment pointing to the SystemTap wiki page that documents the
format of the arguments. Also add a pointer to the SystemTap and
gdb sources which seem to be the best place to get the architecture
specific details.
ChangeLog:
2014-02-11 Will Newton <will.newton@linaro.org>
* include/stap-probe.h: Add comment about probe argument
format.
and in addition to the ChangeLog entries here, I put a note at the top
of ports/ChangeLog.mips similar to those in other files.
Tested that disassembly of installed shared libraries for mips is the
same before and after this patch (except for ld.so where paths in
assertions are involved, as for arm).
* sysdeps/mips: Move directory from ports/sysdeps/mips.
* sysdeps/unix/mips: Move directory from ports/sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory from
ports/sysdeps/unix/sysv/linux/mips.
* README: Update listing for mips-*-linux-gnu and
mips64-*-linux-gnu.
* sysdeps/mips: Move directory to ../sysdeps/mips.
* sysdeps/unix/mips: Move directory to ../sysdeps/unix/mips.
* sysdeps/unix/sysv/linux/mips: Move directory to
../sysdeps/unix/sysv/linux/mips.
Joseph Myers [Mon, 10 Feb 2014 22:25:42 +0000 (22:25 +0000)]
Move shared umount.c from hppa to mips.
This patch prepares for moving mips from ports to libc by reversing
the #include ordering between mips and hppa.
Reversing #include ordering for umount.c is the conservative change in
preparation for moving the mips port. In fact, it appears there are
several redundant umount.c files all implementing umount in terms of
the umount2 syscall; I've filed bug 16552 for eliminating that
redundancy properly.
Tested that disassembly of shared libraries for mips (o32, n32, n64)
is the same before and after this patch.
* sysdeps/unix/sysv/linux/hppa/umount.c: Move to
sysdeps/unix/sysv/linux/mips/mips64/umount.c and #include that
file.
* sysdeps/unix/sysv/linux/mips/mips64/umount.c: Move from
sysdeps/unix/sysv/linux/hppa/umount.c instead of #include of that
file.
Joseph Myers [Mon, 10 Feb 2014 18:15:10 +0000 (18:15 +0000)]
Remove mips dependency on alpha.
This patch removes an unnecessary dependency of the mips port on alpha
by including a powerpc file directly where previously the mips file
included the alpha one which then included the powerpc one.
* sysdeps/unix/sysv/linux/mips/ipc_priv.h: Directly include
sysdeps/unix/sysv/linux/powerpc/ipc_priv.h instead of via
sysdeps/unix/sysv/linux/alpha/ipc_priv.h.
Chris Metcalf [Mon, 10 Feb 2014 15:54:47 +0000 (10:54 -0500)]
Move tilegx, tilepro, and linux-generic from ports to libc.
I've moved the TILE-Gx and TILEPro ports to the main sysdeps hierarchy,
along with the linux-generic ports infrastructure. Beyond the README
update, the move was just
I updated the relevant ChangeLogs along the lines of the ARM move
in commit c6bfe5c4d75 and tested the 64-bit tilegx build to confirm that
there were no changes in "objdump -dr" output in the shared objects.
Mike Frysinger [Mon, 30 Dec 2013 10:31:19 +0000 (10:31 +0000)]
tst-backtrace4: expand output even on failures
When debugging failures in this test, it's helpful to see as much output
as possible. So rather than returning immediately, let the code run as
far as it can. We still mark failures as soon as they happen.
and in addition to the ChangeLog entries here, I put a note at the top
of ports/ChangeLog.arm similar to that at the top of
ChangeLog.powerpc. There is deliberately no NEWS change, as I think
it makes the most sense to put in a general note above all ports
having moved if we can achieve that for 2.20.
Tested that disassembly of installed shared libraries for arm is the
same before and after this patch, except for data (not instructions)
in ld.so (there are assertions in sysdeps/arm/dl-machine.h, and the
path by which that file is found, and so by which it appears in the
assertion message, changes as a result of the move).
* sysdeps/arm: Move directory from ports/sysdeps/arm.
* sysdeps/unix/arm: Move directory from ports/sysdeps/unix/arm.
* sysdeps/unix/sysv/linux/arm: Move directory from
ports/sysdeps/unix/sysv/linux/arm.
* README: Update listing for arm-*-linux-gnueabi.
ports/ChangeLog.arm:
* sysdeps/arm: Move directory to ../sysdeps/arm.
* sysdeps/unix/arm: Move directory to ../sysdeps.arm.
* sysdeps/unix/sysv/linux/arm: Move directory to
../sysdeps/unix/sysv/linux/arm.
Joseph Myers [Sat, 8 Feb 2014 01:17:28 +0000 (01:17 +0000)]
Move shared sysdeps files from alpha to arm.
This patch prepares for moving arm from ports to libc (see overall
plan at <https://sourceware.org/ml/libc-alpha/2014-01/msg00373.html>
and discussion of ordering starting at
<https://sourceware.org/ml/libc-ports/2014-01/msg00071.html>) by
reversing the #include order between arm and alpha, so that arm can
move early as a test for the general pattern of moving architectures.
MicroBlaze files (that used the same alpha files) were made to include
the files directly from their new locations rather than indirecting.
Tested that disassembly of installed shared libraries for arm is the
same before and after this patch.
* sysdeps/unix/sysv/linux/alpha/msgctl.c: Move to
sysdeps/unix/sysv/linux/arm/msgctl.c and #include that file.
* sysdeps/unix/sysv/linux/alpha/semctl.c: Move to
sysdeps/unix/sysv/linux/arm/semctl.c and #include that file.
* sysdeps/unix/sysv/linux/alpha/shmctl.c: Move to
sysdeps/unix/sysv/linux/arm/shmctl.c and #include that file.
* sysdeps/unix/sysv/linux/arm/msgctl.c: Move from
sysdeps/unix/sysv/linux/alpha/msgctl.c instead of #include of that
file.
* sysdeps/unix/sysv/linux/arm/semctl.c: Move from
sysdeps/unix/sysv/linux/alpha/semctl.c instead of #include of that
file.
* sysdeps/unix/sysv/linux/arm/shmctl.c: Move from
sysdeps/unix/sysv/linux/alpha/shmctl.c instead of #include of that
file.
* sysdeps/unix/sysv/linux/microblaze/msgctl.c: Include
sysdeps/unix/sysv/linux/arm/msgctl.c instead of
sysdeps/unix/sysv/linux/alpha/msgctl.c.
* sysdeps/unix/sysv/linux/microblaze/semctl.c: Include
sysdeps/unix/sysv/linux/arm/semctl.c instead of
sysdeps/unix/sysv/linux/alpha/semctl.c.
* sysdeps/unix/sysv/linux/microblaze/shmctl.c: Include
sysdeps/unix/sysv/linux/arm/shmctl.c instead of
sysdeps/unix/sysv/linux/alpha/shmctl.c.
Joseph Myers [Sat, 8 Feb 2014 00:16:57 +0000 (00:16 +0000)]
Remove am33 port.
This patch removes the am33 port (no other port #includes any files
from it), as previously discussed (see
<https://sourceware.org/ml/libc-ports/2014-01/msg00046.html>).
projects / thirdparty / glibc.git / log
