Yang Wei [Mon, 31 Mar 2014 18:01:59 +0000 (14:01 -0400)]
poky: add edgerouter information to README.hardware
Adding the summary, preparation and boot information for the newly introduced
edgerouter BSP.
Signed-off-by: Yang Wei <Wei.Yang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yang Wei [Mon, 31 Mar 2014 18:01:57 +0000 (14:01 -0400)]
yocto-bsps: Add a new BSP to support edgerouter
The EdgeRouter Lite is part of the EdgeMax series. It is an MIPS64 router(Cavium Octeon)
with 512MB of RAM, which uses a USB pendrive for storage.
Setup instructions
------------------
You will need the following:
* NFS root setup on your workstation
* TFTP server installed on your workstation
* Straight-thru 9-conductor serial cable (DB9, M/F) connected from your
PC to UART1
* Ethernet connected to the first ethernet port on the board
The rest of the details can be found in the BSP kernel config, and README.hardware.
Signed-off-by: Yang Wei <Wei.Yang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield [Wed, 26 Mar 2014 20:34:30 +0000 (20:34 +0000)]
yocto-bsps: remove linux-yocto 3.8 bbappend
Yocto 1.6 will support the LTSI 3.4/3.10 kernels and the 3.14 kernel. As
such, we remove the 3.8 linux-yocto recipes to keep our number of supported
kernels at three.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gary Thomas [Mon, 24 Feb 2014 17:11:49 +0000 (17:11 +0000)]
.templateconf: New file for customized template defaults
This file will allow easy customization of the build tools,
in particular the default setting of TEMPLATECONF, which
should reduce the need to fiddle with scripts in the future.
Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark Hatle [Thu, 6 Feb 2014 23:37:24 +0000 (17:37 -0600)]
useradd.bbclass: Add ability to select a static uid/gid automatically
[YOCTO #5436]
Automatic selection of static uid/gid is needed for a dynamically generated
passwd and group file to have a deterministic outcome.
When a package is installed and instructs the system to add a new user or
group, unless it selects a static uid/gid value, the next available uid/gid
will be used. The order in which packages are installed is dynamically
computed, and may change from one installation to the next. This results
in a non-deterministic set of uid/gid values.
Enabling this code by adding USERADDEXTENSION = "useradd-staticids", and
adding a preconfigured passwd/group file will allow the continued dynamic
generation of the rootfs passwd/group files, but will ensure a deterministic
outcome. (Dynamic generation is desired so that users and groups that have
no corresponding functionality are not present within the final system image.)
The rewrite params function will override each of the fields in the
useradd and groupadd calls with the values specified. Note, the password
field is ignored as is the member groups field in the group file. If the
field is empty, the value will not be overridden. (Note, there is no way
to 'blank' a field, as this would only generally affect the 'comment' field
and there really is no reason to blank it.)
Enabling USERADD_ERROR_DYNAMIC will cause packages without static uid/gid
to generate an error and be skipped for the purpose of building. This is
used to prevent non-deterministic behavior.
USERADD_UID_TABLES and USERADD_GID_TABLES may be used to specify the name
of the passwd and group files. By default they are assumed to be
'files/passwd' and 'files/group'. Layers are searched in BBPATH order.
Darren Hart [Tue, 21 Jan 2014 23:58:45 +0000 (23:58 +0000)]
yocto-bsp: Add core2 and corei7 tune choice to x86_64
Update the x86_64 architecture bsp creator to include choices for core2
and corei7 tune files.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Tue, 21 Jan 2014 23:35:39 +0000 (23:35 +0000)]
yocto-bsp: Update substrate to use the new x86 tune files
Update the substrates to use x86-base instead of ia32-base and core2-64
instead of x86-64. Update the core2 bit to include the DEFAULTTUNE to be
explicit.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Tue, 21 Jan 2014 21:12:12 +0000 (21:12 +0000)]
genericx86: Use require instead of include
Use require instead of include to avoid silent errors when the required
tune files change name or are moved. It's going to fail anyway, it might
as well fail with an error message that is immediately helpful.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Cc: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Tue, 21 Jan 2014 21:11:31 +0000 (21:11 +0000)]
genericx86: Use new x86 tune files
Use the new names for the x86 tunes files (x86 instead of ia32).
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Cc: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Tue, 21 Jan 2014 18:04:12 +0000 (18:04 +0000)]
genericx86-64: Use the core2-64 tune
As x86_64 has been "demoted" to an ABI definition rather than a concrete
tune file, replace it with core2-64 for the genericx86-64 machine.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Cc: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Tue, 21 Jan 2014 18:00:57 +0000 (18:00 +0000)]
genericx86: Use the core2 tune file
Aside from the movbe and specialized instruction scheduling for the lack
of out-of-order scheduling in the older Atom CPUs, the core2 tune covers
these CPUs adequately. Since the current atom tune just uses core2
anyway, go ahead and make this explicit here.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Paul Eggleton <paul.eggleton@intel.com> Cc: Tom Zanussi <tom.zanussi@intel.com> Cc: Nitin Kamble <nitin.a.kamble@intel.com> Cc: Mark Hatle <mark.hatle@windriver.com> Cc: Bruce Ashfield <bruce.ashfield@windriver.com> Cc: Martin Jansa <martin.jansa@gmail.com> Cc: Ross Burton <ross.burton@intel.com>> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 27 Jan 2014 14:39:48 +0000 (14:39 +0000)]
local.conf.sample: Add automatic defaults for BB_NUMBER_THREADS and PARALLEL_MAKE
Its rather sad that people don't appear to read local.conf and then complain
about slow builds when they're just using a single thread. Most systems have
more than one core now so we might as well use a more automatic default
for these values. This may lead to better experiences for new users.
[YOCTO #2528]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glib-2.0: out of date, it was added before/when 2.35.8, now we use 2.38.2
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Wed, 25 Dec 2013 02:25:38 +0000 (02:25 +0000)]
poky: Add Fedora-20 to supported distros list
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang [Tue, 31 Dec 2013 11:07:08 +0000 (19:07 +0800)]
upstream_tracking.inc: update entries
Remove/update the following entries:
autoconf: out of date, it was added before/when 2.68, now we use 2.69
autogen: out of date, it was added before/when 5.12, now we use 5.17.4
automake: out of date, it was added before/when 1.12, now we use 1.14
pn-gmp: out of date, it was added before/when 5.0.5, now we use 5.1.1
makedevs: out of date, it was added before/when 1.0.0, now we use 1.0.1
glib-2.0: update it.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 20 Dec 2013 16:39:11 +0000 (10:39 -0600)]
yocto-bsp: Add missing interfaces file for qemu BSP templates
The qemu BSPs were picking up the wrong interfaces file, resulting in
some erratic interface behavior seen with qemu-based BSPs - this fixes
the problem.
[YOCTO #5636]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 15 Dec 2013 16:30:29 +0000 (16:30 +0000)]
qemu/local.conf.sample: Add sdl PACKAGECONFIG
Currently the SDL configuration option for qemu floats. This is confusing to new users
and makes the build non-determinstic. This patch adds a PACKAGECONFIG option, defaulting
to off and adds documentation to local.conf.sample leaving it on by default since this
is the configuration our quick start assumes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Fri, 13 Dec 2013 12:20:54 +0000 (12:20 +0000)]
local.conf.sample.extended: restore some edits
Poky commit ba8506ee342a1a579ceb309f3f50285eaad84f25 reverted some
previous changes that hadn't been applied in the OE-Core version of this
file. This patch restores them and tweaks a couple of sentences so that
they make sense.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 8 Dec 2013 22:02:51 +0000 (22:02 +0000)]
linux-libc-headers-yocto: Drop old 3.4+git version
Overriding the kernel headers is bad practise and we have little need of
this specific recipe as the outdated version shows so lets drop it.
Anyone needing it can find it in the history.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bastien JAUNY [Wed, 13 Nov 2013 19:21:14 +0000 (20:21 +0100)]
yocto-bsp: Add missing format specifier in bblayers error message
If the build environment is misconfigured (e.g. a bad path
for a layer in bblayers.conf) the yocto-bsp script crashes with a
standard python error, not very explicit. This fixes the problem.
Signed-off-by: Bastien JAUNY <bastien.jauny@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristiana Voicu [Mon, 7 Oct 2013 13:41:13 +0000 (16:41 +0300)]
maintainers.inc: remove obsolete recipes
This patch removes some references on imake, xorg-cf-files and transfig
from maintainers, distro_alias, recipe_color, package_regex and seperatebuilddir
files. Transfig, imake and the associated xorg-cf-files were removed.
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi [Fri, 4 Oct 2013 14:37:38 +0000 (09:37 -0500)]
yocto-kernel: Use variable-substituted BBLAYERS
The current find_bblayers() code finds and parses the BBLAYERS
variable manually, and therefore doesn't handle variable substitution,
which causes problems if used.
This change makes find_bblayers() use the variable-substituted
BBLAYERS instead.
Fixes [YOCTO #5106]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 5992830145c fixes the autobuilder needing to rename
qemux86-64 to qemux86_64 however in order to maintain autobuilder
compatibility with prior releases we need to bump LAYERVERSION.
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 11 Sep 2013 11:07:21 +0000 (12:07 +0100)]
yocto-bsp: conditionalise mesa-swrast on opengl in templates
As per the similar commit in oe-core on the qemu machines, the templates should
respect the opengl DISTRO_FEATURE when adding mesa-driver-swrast to new qemu
machines.
Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Liming Wang [Fri, 6 Sep 2013 20:58:36 +0000 (16:58 -0400)]
beagleboard: upgrade the kernel to 3.10.x
In 3.10.x linux kernel, uImage can't be compiled by default. But zImage
has been supported by the latest u-boot, so use zImage as the default kernel
image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.
And add device tree files to support dtb in latest kernel.
Signed-off-by: Liming Wang <liming.wang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kevin Hao [Fri, 6 Sep 2013 20:58:34 +0000 (16:58 -0400)]
mpc8315e-rdb: update to the 3.10 kernel
Update the mpc8315e-rdb to the latest available yocto kernel.
Build and boot test on mpc8315e-rdb board with core-image-sato.
Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Wed, 4 Sep 2013 21:20:55 +0000 (21:20 +0000)]
genericx86: Create a genericx86-common.inc base for the x86 BSPs
The genericx86 and genericx86-64 machines share a great deal in common
in terms of machine features, required packages, etc. Use a common
include file to simplify changes to both machine definitions and avoid
accidental omissions.
Replace the hard-coded XSERVER assignment with the XSERVER_IA32*
defines from ia32-base.inc.
Signed-off-by: Darren Hart <dvhart@linux.intel.com> Cc: Ross Burton <ross.burton@intel.com> Cc: yunguo.wei@windriver.com Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Liming Wang [Wed, 4 Sep 2013 07:08:29 +0000 (15:08 +0800)]
beagleboard: upgrade u-boot to the latest version
Now the latest version of u-boot is 2013.07 and it depends on
its own MLO, instead of x-load, as the Second Program Loader. So remove
x-load and use u-boot's MLO.
And also replace u-boot.bin with u-boot.img as the u-boot image file.
Signed-off-by: Liming Wang <liming.wang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Tue, 3 Sep 2013 10:10:44 +0000 (11:10 +0100)]
poky.conf: add version-going-backwards to ERROR_QA
This restores this check after it was disabled by recent poky rev 560dac6e7db76f533f98eda969f585e4eb416e6e. This check is already in
ERROR_QA in the default value set in OE-Core.
Fixes [YOCTO #5088].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
