Vishal Verma [Tue, 21 Dec 2021 20:06:19 +0000 (20:06 +0000)]
md: add support for REQ_NOWAIT
commit 021a24460dc2 ("block: add QUEUE_FLAG_NOWAIT") added support
for checking whether a given bdev supports handling of REQ_NOWAIT or not.
Since then commit 6abc49468eea ("dm: add support for REQ_NOWAIT and enable
it for linear target") added support for REQ_NOWAIT for dm. This uses
a similar approach to incorporate REQ_NOWAIT for md based bios.
This patch was tested using t/io_uring tool within FIO. A nvme drive
was partitioned into 2 partitions and a simple raid 0 configuration
/dev/md0 was created.
md0 : active raid0 nvme4n1p1[1] nvme4n1p2[0] 937423872 blocks super 1.2 512k chunks
We can see iou-wrk-38397 io worker thread created which gets created
when io_uring sees that the underlying device (/dev/md0 in this case)
doesn't support nowait.
After running this patch, we don't see any io worker thread
being created which indicated that io_uring saw that the
underlying device does support nowait. This is the exact behaviour
noticed on a dm device which also supports nowait.
For all the other raid personalities except raid0, we would need
to train pieces which involves make_request fn in order for them
to correctly handle REQ_NOWAIT.
Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
Mariusz Tkaczyk [Fri, 17 Dec 2021 09:29:55 +0000 (10:29 +0100)]
md: drop queue limitation for RAID1 and RAID10
As suggested by Neil Brown[1], this limitation seems to be
deprecated.
With plugging in use, writes are processed behind the raid thread
and conf->pending_count is not increased. This limitation occurs only
if caller doesn't use plugs.
It can be avoided and often it is (with plugging). There are no reports
that queue is growing to enormous size so remove queue limitation for
non-plugged IOs too.
Davidlohr Bueso [Tue, 16 Nov 2021 01:23:17 +0000 (17:23 -0800)]
md/raid5: play nice with PREEMPT_RT
raid_run_ops() relies on the implicitly disabled preemption for
its percpu ops, although this is really about CPU locality. This
breaks RT semantics as it can take regular (and thus sleeping)
spinlocks, such as stripe_lock.
Add a local_lock such that non-RT does not change and continues
to be just map to preempt_disable/enable, but makes RT happy as
the region will use a per-CPU spinlock and thus be preemptible
and still guarantee CPU locality.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
block/rnbd-clt-sysfs: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the rnbd controller sysfs code to use default_groups field
which has been the preferred way since aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: "Md. Haris Iqbal" <haris.iqbal@ionos.com> Cc: Jack Wang <jinpu.wang@ionos.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20220104162947.1320936-1-gregkh@linuxfoundation.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to create kobject children of the pktcdvd device just
to display a subdirectory name. Instead, use a named attribute group
which removes the extra kobjects and also fixes the userspace race where
the device is created yet tools like libudev can not see the attributes
as they think the subdirectories are some other sort of device.
Jens Axboe [Wed, 29 Dec 2021 17:50:50 +0000 (09:50 -0800)]
Merge tag 'nvme-5.17-2021-12-29' of git://git.infradead.org/nvme into for-5.17/drivers
Pull NVMe updates from Christoph:
"nvme updates for Linux 5.17
- increment request genctr on completion (Keith Busch, Geliang Tang)
- add a 'iopolicy' module parameter (Hannes Reinecke)
- print out valid arguments when reading from /dev/nvme-fabrics
(Hannes Reinecke)"
* tag 'nvme-5.17-2021-12-29' of git://git.infradead.org/nvme:
nvme: add 'iopolicy' module parameter
nvme: drop unused variable ctrl in nvme_setup_cmd
nvme: increment request genctr on completion
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
Ming Lei [Fri, 24 Dec 2021 01:08:31 +0000 (09:08 +0800)]
block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
It isn't correct to set set->nr_maps as 3 if g_poll_queues is > 0 since
we can change it via configfs for null_blk device created there, so only
set it as 3 if active poll_queues is > 0.
Fixes divide zero exception reported by Shinichiro.
Fixes: 2bfdbe8b7ebd ("null_blk: allow zero poll queues") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20211224010831.1521805-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hannes Reinecke [Mon, 20 Dec 2021 12:51:45 +0000 (13:51 +0100)]
nvme: add 'iopolicy' module parameter
While the 'iopolicy' sysfs attribute can be set at runtime, most
storage arrays prefer to use the 'round-robin' iopolicy per default.
We can use udev rules to set this, but is getting rather unwieldy
for rebranded arrays as we would have to update the udev rules
anytime a new array shows up, leading to the same mess we currently
have in multipathd for configuring the RDAC arrays.
Hence this patch adds a module parameter 'iopolicy' to allow the
admin to switch the default, and to do away with the need for a
udev rule here.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Geliang Tang [Wed, 22 Dec 2021 09:32:44 +0000 (17:32 +0800)]
nvme: drop unused variable ctrl in nvme_setup_cmd
The variable 'ctrl' became useless since the code using it was dropped
from nvme_setup_cmd() in the commit 292ddf67bbd5 ("nvme: increment
request genctr on completion"). Fix it to get rid of this compilation
warning in the nvme-5.17 branch:
drivers/nvme/host/core.c: In function ‘nvme_setup_cmd’:
drivers/nvme/host/core.c:993:20: warning: unused variable ‘ctrl’ [-Wunused-variable]
struct nvme_ctrl *ctrl = nvme_req(req)->ctrl;
^~~~
Fixes: 292ddf67bbd5 ("nvme: increment request genctr on completion") Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Mon, 13 Dec 2021 17:08:47 +0000 (09:08 -0800)]
nvme: increment request genctr on completion
The nvme request generation counter is intended to catch duplicate
completions. Incrementing the counter on submission means duplicates can
only be caught if the request tag is reallocated and dispatched prior to
the driver observing the corrupted CQE. Incrementing on completion
removes this window, making it possible to detect duplicate completions
in consecutive entries.
Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Tue, 7 Dec 2021 13:55:49 +0000 (14:55 +0100)]
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
Currently applications have a hard time figuring out which
nvme-over-fabrics arguments are supported for any given kernel;
the ioctl will return an error code on failure, and the application
has to guess whether this was due to an invalid argument or due
to a connection or controller error.
With this patch applications can read a list of supported
arguments by simply reading from /dev/nvme-fabrics, allowing
them to validate the connection string.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
This driver was for rare and shortlived high end enterprise hardware
and hasn't been maintained since 2014, which also means it never got
converted to use blk-mq.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Vaibhav Gupta [Wed, 8 Dec 2021 19:24:48 +0000 (13:24 -0600)]
mtip32xx: convert to generic power management
Convert mtip32xx from legacy PCI power management to the generic power
management framework.
Previously, mtip32xx used legacy PCI power management, where
mtip_pci_suspend() and mtip_pci_resume() were responsible for both
device-specific things and generic PCI things:
Bjorn Helgaas [Wed, 8 Dec 2021 19:24:47 +0000 (13:24 -0600)]
mtip32xx: remove pointless drvdata lookups
Previously we passed a struct pci_dev * to mtip_check_surprise_removal(),
which immediately looked up the driver_data. But all callers already have
the driver_data pointer, so just pass it directly and skip the extra
lookup. No functional change intended.
Kees Cook [Thu, 18 Nov 2021 20:37:12 +0000 (12:37 -0800)]
drbd: Use struct_group() to zero algs
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Add a struct_group() for the algs so that memset() can correctly reason
about the size.
Tetsuo Handa [Mon, 13 Dec 2021 12:55:27 +0000 (21:55 +0900)]
loop: make autoclear operation asynchronous
syzbot is reporting circular locking problem at __loop_clr_fd() [1], for
commit 87579e9b7d8dc36e ("loop: use worker per cgroup instead of kworker")
is calling destroy_workqueue() with disk->open_mutex held.
This circular dependency cannot be broken unless we call __loop_clr_fd()
without holding disk->open_mutex. Therefore, defer __loop_clr_fd() from
lo_release() to a WQ context.
Jens Axboe [Fri, 10 Dec 2021 23:32:44 +0000 (16:32 -0700)]
null_blk: cast command status to integer
kernel test robot reports that sparse now triggers a warning on null_blk:
>> drivers/block/null_blk/main.c:1577:55: sparse: sparse: incorrect type in argument 3 (different base types) @@ expected int ioerror @@ got restricted blk_status_t [usertype] error @@
drivers/block/null_blk/main.c:1577:55: sparse: expected int ioerror
drivers/block/null_blk/main.c:1577:55: sparse: got restricted blk_status_t [usertype] error
because blk_mq_add_to_batch() takes an integer instead of a blk_status_t.
Just cast this to an integer to silence it, null_blk is the odd one out
here since the command status is the "right" type. If we change the
function type, then we'll have do that for other callers too (existing and
future ones).
NeilBrown [Fri, 10 Dec 2021 04:31:56 +0000 (21:31 -0700)]
pktdvd: stop using bdi congestion framework.
The bdi congestion framework isn't widely used and should be
deprecated.
pktdvd makes use of it to track congestion, but this can be done
entirely internally to pktdvd, so it doesn't need to use the framework.
So introduce a "congested" flag. When waiting for bio_queue_size to
drop, set this flag and a var_waitqueue() to wait for it. When
bio_queue_size does drop and this flag is set, clear the flag and call
wake_up_var().
We don't use a wait_var_event macro for the waiting as we need to set
the flag and drop the spinlock before calling schedule() and while that
is possible with __wait_var_event(), result is not easy to read.
Ming Lei [Fri, 3 Dec 2021 08:17:03 +0000 (16:17 +0800)]
block: null_blk: batched complete poll requests
Complete poll requests via blk_mq_add_to_batch() and
blk_mq_end_request_batch(), so that we can cover batched complete
code path by running null_blk test.
Meantime this way shows ~14% IOPS boost on 't/io_uring /dev/nullb0'
in my test.
Xiongwei Song [Tue, 16 Nov 2021 13:10:33 +0000 (21:10 +0800)]
floppy: Add max size check for user space request
We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.
When the watchdog detects a disk change, it calls cancel_activity(),
which in turn tries to cancel the fd_timer delayed work.
In the above scenario, fd_timer_fn is set to fd_watchdog(), meaning
it is trying to cancel its own work.
This results in a hang as cancel_delayed_work_sync() is waiting for the
watchdog (itself) to return, which never happens.
This can be reproduced relatively consistently by attempting to read a
broken floppy, and ejecting it while IO is being attempted and retried.
To resolve this, this patch calls cancel_delayed_work() instead, which
cancels the work without waiting for the watchdog to return and finish.
Before this regression was introduced, the code in this section used
del_timer(), and not del_timer_sync() to delete the watchdog timer.
Link: https://lore.kernel.org/r/399e486c-6540-db27-76aa-7a271b061f76@tasossah.com Fixes: 070ad7e793dc ("floppy: convert to delayed work and single-thread wq") Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tetsuo Handa [Wed, 24 Nov 2021 10:47:40 +0000 (19:47 +0900)]
loop: don't hold lo_mutex during __loop_clr_fd()
syzbot is reporting circular locking problem at __loop_clr_fd() [1], for
commit 87579e9b7d8dc36e ("loop: use worker per cgroup instead of kworker")
is calling destroy_workqueue() with lo->lo_mutex held.
Since all functions where lo->lo_state matters are already checking
lo->lo_state with lo->lo_mutex held (in order to avoid racing with e.g.
ioctl(LOOP_CTL_REMOVE)), and __loop_clr_fd() can be called from either
ioctl(LOOP_CLR_FD) xor close(), lo->lo_state == Lo_rundown is considered
as an exclusive lock for __loop_clr_fd(). Therefore, hold lo->lo_mutex
inside __loop_clr_fd() only when asserting/updating lo->lo_state.
Since ioctl(LOOP_CLR_FD) depends on lo->lo_state == Lo_bound, a valid
lo->lo_backing_file must have been assigned by ioctl(LOOP_SET_FD) or
ioctl(LOOP_CONFIGURE). Thus, we can remove lo->lo_backing_file test,
and convert __loop_clr_fd() into a void function.
block: remove the gendisk argument to blk_execute_rq
Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait
given that it is unused now. Also convert the boolean at_head parameter
to actually use the bool type while touching the prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: return the io_context from create_task_io_context
Grab a reference to the newly allocated or existing io_context in
create_task_io_context and return it. This simplifies the callers and
removes the need for double lookups.
In __copy_io we know that the newly allocate task_struct does not have
an I/O context yet and is not exiting. So just allocate the I/O context
struct and install it directly. There is no need to lock the task
either as it is just being created.
Move blk_mq_sched_assign_ioc so that many interfaces from the file can
be marked static. Rename the function to ioc_find_get_icq as well and
return the icq to simplify the interface.
Jan Kara [Thu, 25 Nov 2021 13:36:41 +0000 (14:36 +0100)]
bfq: Do not let waker requests skip proper accounting
Commit 7cc4ffc55564 ("block, bfq: put reqs of waker and woken in
dispatch list") added a condition to bfq_insert_request() which added
waker's requests directly to dispatch list. The rationale was that
completing waker's IO is needed to get more IO for the current queue.
Although this rationale is valid, there is a hole in it. The waker does
not necessarily serve the IO only for the current queue and maybe it's
current IO is not needed for current queue to make progress. Furthermore
injecting IO like this completely bypasses any service accounting within
bfq and thus we do not properly track how much service is waker's queue
getting or that the waker is actually doing any IO. Depending on the
conditions this can result in the waker getting too much or too few
service.
Despite processes have very different IO priorities, they get the same
about of service. The reason is that bfq identifies these processes as
having waker-wakee relationship and once that happens, IO from
fastwriter gets injected during slowwriter's time slice. As a result bfq
is not aware that fastwriter has any IO to do and constantly schedules
only slowwriter's queue. Thus fastwriter is forced to compete with
slowwriter's IO all the time instead of getting its share of time based
on IO priority.
Drop the special injection condition from bfq_insert_request(). As a
result, requests will be tracked and queued in a normal way and on next
dispatch bfq_select_queue() can decide whether the waker's inserted
requests should be injected during the current queue's timeslice or not.
Fixes: 7cc4ffc55564 ("block, bfq: put reqs of waker and woken in dispatch list") Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211125133645.27483-8-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 25 Nov 2021 13:36:40 +0000 (14:36 +0100)]
bfq: Log waker detections
Waker - wakee relationships are important in deciding whether one queue
can preempt the other one. Print information about detected waker-wakee
relationships so that scheduling decisions can be better understood from
block traces.
Jan Kara [Thu, 25 Nov 2021 13:36:39 +0000 (14:36 +0100)]
bfq: Provide helper to generate bfqq name
Instead of having helper formating bfqq pid, provide a helper to
generate full bfqq name as used in the traces. It saves some code
duplication and will save more in the coming tracepoints.
Jan Kara [Thu, 25 Nov 2021 13:36:38 +0000 (14:36 +0100)]
bfq: Limit waker detection in time
Currently, when process A starts issuing requests shortly after process
B has completed some IO three times in a row, we decide that B is a
"waker" of A meaning that completing IO of B is needed for A to make
progress and generally stop separating A's and B's IO much. This logic
is useful to avoid unnecessary idling and thus throughput loss for cases
where workload needs to switch e.g. between the process and the
journaling thread doing IO. However the detection heuristic tends to
frequently give false positives when A and B are fighting IO bandwidth
and other processes aren't doing much IO as we are basically deemed to
eventually accumulate three occurences of a situation where one process
starts issuing requests after the other has completed some IO. To reduce
these false positives, cancel the waker detection also if we didn't
accumulate three detected wakeups within given timeout. The rationale is
that if wakeups are really rare, the pointless idling doesn't hurt
throughput that much anyway.
This significantly reduces false waker detection for workload like:
Jan Kara [Thu, 25 Nov 2021 13:36:37 +0000 (14:36 +0100)]
bfq: Limit number of requests consumed by each cgroup
When cgroup IO scheduling is used with BFQ it does not really provide
service differentiation if the cgroup drives a big IO depth. That for
example happens with writeback which asynchronously submits lots of IO
but it can happen with AIO as well. The problem is that if we have two
cgroups that submit IO with different weights, the cgroup with higher
weight properly gets more IO time and is able to dispatch more IO.
However this causes lower weight cgroup to accumulate more requests
inside BFQ and eventually lower weight cgroup consumes most of IO
scheduler tags. At that point higher weight cgroup stops getting better
service as it is mostly blocked waiting for a scheduler tag while its
queues inside BFQ are empty and thus lower weight cgroup gets served.
Check how many requests submitting cgroup has allocated in
bfq_limit_depth() and if it consumes more requests than what would
correspond to its weight limit available depth to 1 so that the cgroup
cannot consume many more requests. With this limitation the higher
weight cgroup gets proper service even with writeback.
Reviewed-by: Michal Koutný <mkoutny@suse.com> Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20211125133645.27483-4-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Kara [Thu, 25 Nov 2021 13:36:36 +0000 (14:36 +0100)]
bfq: Store full bitmap depth in bfq_data
Store bitmap depth shift inside bfq_data so that we can use it in
bfq_limit_depth() for proportioning when limiting number of available
request tags for a cgroup.
Jan Kara [Thu, 25 Nov 2021 13:36:35 +0000 (14:36 +0100)]
bfq: Track number of allocated requests in bfq_entity
When we want to limit number of requests used by each bfqq and also
cgroup, we need to track also number of requests used by each cgroup.
So track number of allocated requests for each bfq_entity.
Jan Kara [Thu, 25 Nov 2021 13:36:34 +0000 (14:36 +0100)]
block: Provide blk_mq_sched_get_icq()
Currently we lookup ICQ only after the request is allocated. However BFQ
will want to decide how many scheduler tags it allows a given bfq queue
(effectively a process) to consume based on cgroup weight. So provide a
function blk_mq_sched_get_icq() so that BFQ can lookup ICQ earlier.
The completion callback for the sdhci-pci device is invoked from a
kworker.
I couldn't identify in which context is mmc_blk_mq_req_done() invoke but
the remaining caller are from invoked from preemptible context. Here it
would make sense to complete the request directly instead scheduling
ksoftirqd for its completion.
Eric Biggers [Wed, 24 Nov 2021 01:37:33 +0000 (17:37 -0800)]
blk-crypto: remove blk_crypto_unregister()
This function is trivial and is only used in one place. Having this
function is misleading because it implies that blk_crypto_register()
needs to be paired with blk_crypto_unregister(), which is not the case.
Just set disk->queue->crypto_profile to NULL directly.
Refactor the request alloction so that blk_mq_get_cached_request tries
to find a cached request first, and the entirely separate and now
self contained blk_mq_get_new_requests allocates one or more requests
if that is not possible.
There is a small change in behavior as submit_bio_checks is called
twice now if a cached request is present but can't be used, but that
is a small price to pay for unwinding this code.
blk-mq: simplify the plug handling in blk_mq_submit_bio
blk_mq_submit_bio has two different plug cases, one that uses full
plugging and a limited plugging one.
The limited plugging case is only used for a corner case that does
not matter in real life:
- no ->commit_rqs (so not NVMe)
- no shared tags (so not SCSI)
- not rotational (so no old disk or floppy driver)
- must have multiple queues (so no eMMC)
Remove the limited merging case and all the related junk to simplify
blk_mq_submit_bio and the functions called from it.
block: don't set GENHD_FL_NO_PART for hidden gendisks
Hidden gendisks can't be opened using blkdev_get_*, so we can't really
reach any of the partition scanning paths or partitioning ioctls except
for the initial partition scan from add_disk.
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
This manually reverts 07b652cdbec3 ("mmc: card: Don't show eMMC RPMB and
BOOT areas in /proc/partitions"). Based on the commit description that
change was purely cosmetic. mmc is the last driver that sets this
flag and thus prevents it from being removed.
This manually reverts commit 27290b469051 ("null_blk: suppress invalid
partition info"). The message in that commit log can't appearch as
the flag is never checked during probing, and there is no good reason
to treat null_blk special in /proc/partitions.
disk_max_parts never returns 0 given that ->minors for devices not using
the extended dev_t must be non-zero, and disk_max_parts always returns
DISK_MAX_PARTS for the latter.
GENHD_FL_CD marks a gendisk as a vaguely CD-ROM like device.
Besides being used internally inside of sunvdc.c an xen-blkfront it
is used by xen-blkback as a hint to claim a device exported to a
guest is a CD-ROM like device. Just check for disk->cdi instead
which is the right indicator for "real" CD-ROM or DVD drivers. This
will miss the paravirtualized guest drivers, but those make little
sense to report anyway.
Move blk_mq_flush_plug_list and blk_mq_plug_issue_direct down in blk-mq.c
to prepare for marking blk_mq_request_issue_directly static without the
need of a forward declaration.
Linus Torvalds [Sun, 28 Nov 2021 19:58:52 +0000 (11:58 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost,virtio,vdpa bugfixes from Michael Tsirkin:
"Misc fixes all over the place.
Revert of virtio used length validation series: the approach taken
does not seem to work, breaking too many guests in the process. We'll
need to do length validation using some other approach"
[ This merge also ends up reverting commit f7a36b03a732 ("vsock/virtio:
suppress used length validation"), which came in through the
networking tree in the meantime, and was part of that whole used
length validation series - Linus ]
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa_sim: avoid putting an uninitialized iova_domain
vhost-vdpa: clean irqs before reseting vdpa device
virtio-blk: modify the value type of num in virtio_queue_rq()
vhost/vsock: cleanup removing `len` variable
vhost/vsock: fix incorrect used length reported to the guest
Revert "virtio_ring: validate used buffer length"
Revert "virtio-net: don't let virtio core to validate used length"
Revert "virtio-blk: don't let virtio core to validate used length"
Revert "virtio-scsi: don't let virtio core to validate used buffer length"
projects / thirdparty / linux.git / log
