Alexander Stein [Fri, 21 Jul 2023 11:10:36 +0000 (13:10 +0200)]
arm64: dts: imx8qm: Fix VPU core alias name
Alias names use dashes instead of underscores, fix this. Silences also
dtbs_check warning:
imx8qxp-tqma8xqp-mba8xx.dtb: aliases: 'vpu_core0', 'vpu_core1', 'vpu_core2'
do not match any of the regexes: '^[a-z][a-z0-9\\-]*$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/aliases.yaml#
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks imx8mp-venice-gw73xx-2x consists of a SOM + baseboard.
The GW702x SOM contains the following:
- i.MX8M Plus SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button
controller, and ADC's
- PMIC
- SOM connector providing:
- eQoS GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 3.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW73xx Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with SPI
- off-board I/O connector with I2C, and GPIO
- off-board I/O connector with MIPI DSI, MIPI CSI, I2C, and GPIO
- off-board I/O connector with RS232 and RS485
- EERPOM
- USB 3.0 HUB
- USB 3.0 TypeA socket
- USB 2.0 Micro-B OTG socket
- Accelerometer
- 1x GbE (eQoS)
- 1x GbE (PCI)
- PCIe clock generator
- PCIe switch
- 2x full-length miniPCIe socket with PCI and USB2.0
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) SIM, and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
- on-board 802.11abgnac with Bluetooth 5.2
- Wide range DC input supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks imx8mp-venice-gw72xx-2x consists of a SOM + baseboard.
The GW702x SOM contains the following:
- i.MX8M Plus SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button
controller, and ADC's
- PMIC
- SOM connector providing:
- eQoS GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 3.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW72xx Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with SPI
- off-board I/O connector with I2C, and GPIO
- off-board I/O connector with MIPI DSI, MIPI CSI, I2C, and GPIO
- off-board I/O connector with RS232 and RS485
- EERPOM
- USB 3.0 HUB
- USB 3.0 TypeA socket
- USB 2.0 Micro-B OTG socket
- Accelerometer
- 1x GbE (eQoS)
- 1x GbE (PCI)
- PCIe clock generator
- PCIe switch
- 1x full-length miniPCIe socket with PCI and USB2.0
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) SIM, and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
- Wide range DC input supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks imx8mp-venice-gw71xx-2x consists of a SOM + baseboard.
The GW702x SOM contains the following:
- i.MX8M Plus SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button
controller, and ADC's
- PMIC
- SOM connector providing:
- eQoS GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 3.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW71xx Baseboard contains the following:
- GPS
- RJ45 GbE (eQoS)
- off-board I/O connector with UART, I2C, SPI, GPIO
- EERPOM
- PCIe clock generator
- full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
- USB Type-C with USB 2.0 host and peripheral support
- Wide range DC input supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks imx8mm-venice-gw7905-0x consists of a SOM + baseboard.
The GW700x SOM contains the following:
- i.MX8M Mini SoC
- LPDDR4 memory
- eMMC Boot device
- Gateworks System Controller (GSC) with integrated EEPROM, button
controller, and ADC's
- PMIC
- SOM connector providing:
- FEC GbE MII
- 1x SPI
- 2x I2C
- 4x UART
- 2x USB 2.0
- 1x PCI
- 1x SDIO (4-bit 3.3V)
- 1x SDIO (4-bit 3.3V/1.8V)
- GPIO
The GW7905 Baseboard contains the following:
- GPS
- microSD
- off-board I/O connector with I2C, SPI, GPIO
- EERPOM
- PCIe clock generator
- 1x full-length miniPCIe socket with PCI/USB3 (via mux) and USB2.0
- 1x half-length miniPCIe socket with USB2.0 and USB3.0
- USB 3.0 HUB
- USB Type-C with USB PD Sink capability and peripheral support
- USB Type-C with USB 3.0 host support
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Wed, 19 Jul 2023 15:29:20 +0000 (08:29 -0700)]
arm64: dts: imx8mp: add imx8mp-venice-gw74xx-rpidsi overlay for display
Add support for the following Raspberry Pi displays:
- DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
- DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
Both have the following hardware:
- FocalTech FT5406 10pt touch controller (with no interrupt)
- Powertip PH800480T013-IDF02 compatible panel
- Toshiba TC358762 compatible DSI to DBI bridge
- ATTINY based regulator used for backlight controller and panel enable
Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hugo Villeneuve [Wed, 19 Jul 2023 13:52:37 +0000 (09:52 -0400)]
arm64: dts: imx8mn-var-som-symphony: update USB OTG for new board versions
USB OTG is currently not working for new versions of the Variscite
Symphony EVK and imx8mn nano SOM (versions >= 1.4a).
The PTN5150 circuitry on newer versions of the Symphony EVK board has
a non-standard configuration in which the PTN5150 IRQ pin is left
unconnected, and the PTN5150 ID pin is connected to GPIO1_IO11. This
requires changes to the ptn5150 driver to support this new mode.
Variscite have indicated their intention to submit those changes
upstream.
In the meantime, import device tree changes from linux-5.15 branch of
varigit repos to at least make the USB OTG port operate correctly in
host mode.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arm64: dts: imx8mq-librem5: Reduce usdhc2's post-power-on-delay-ms to 20ms
This appears to be enough for both Redpine and SparkLAN cards.
Waiting for too long makes us waste time in resume from system
suspend, so let's keep it as short as possible.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arm64: dts: imx8mq-librem5: set audio-1v8 always-on
Unfortunately the codec can't be switched off on it's own. It would ground
the whole bus it's connected to (because of it's built-in diodes to VDD on
i2c pins), making all the other devices on the same bus inaccessible:
Christian Hemp [Wed, 19 Jul 2023 07:13:07 +0000 (09:13 +0200)]
arm64: dts: imx8mp-phycore-som: Remove eth phy interrupt
In some occasions the ethernet phy IRQ can not be detected correctly
by the SoC. This leads to a non detected link in Linux. The problem is
caused by the buffer that adjusts the voltage between ethernet phy
and SoC. To workaround this, remove the IRQ support for the ethernet
phy and use polling instead.
Alexander Stein [Tue, 18 Jul 2023 08:57:21 +0000 (10:57 +0200)]
arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board
This adds support for TQMa93xx module and MBa93xxLA SBC board.
TQMa93xx is a SOM using i.MX93 SOC. The SOM features PMIC, RAM, e-MMC and
some optional peripherals like SPI-NOR, RTC, EEPROM, gyroscope and
secure element.
TQMa93xxLA is a solder on type SOM and can be used directly on MBa93XXLA.
TQMa93xxCA is a feature compatible, socketable type SOM.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Tue, 18 Jul 2023 20:55:38 +0000 (13:55 -0700)]
arm64: dts: imx8mm: add imx8mm-venice-gw72xx-0x-rpidsi overlay for display
Add support for the following Raspberry Pi displays:
- DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
- DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
Both have the following hardware:
- FocalTech FT5406 10pt touch controller (with no interrupt)
- Powertip PH800480T013-IDF02 compatible panel
- Toshiba TC358762 compatible DSI to DBI bridge
- ATTINY based regulator used for backlight controller and panel enable
Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Tue, 18 Jul 2023 20:55:00 +0000 (13:55 -0700)]
arm64: dts: imx8mm: add imx8mm-venice-gw73xx-0x-rpidsi overlay for display
Add support for the following Raspberry Pi displays:
- DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
- DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
Both have the following hardware:
- FocalTech FT5406 10pt touch controller (with no interrupt)
- Powertip PH800480T013-IDF02 compatible panel
- Toshiba TC358762 compatible DSI to DBI bridge
- ATTINY based regulator used for backlight controller and panel enable
Support is added via a device-tree overlay. The touch controller is not
yet supported as polling mode is needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Wed, 5 Jul 2023 20:59:53 +0000 (16:59 -0400)]
arm64: dts: imx8mp: remove arm,primecell-periphid at etm nodes
The reg size of etm nodes is incorrectly set to 64k instead of 4k. This
leads to a crash when calling amba_read_periphid(). After corrected reg
size, amba_read_periphid() retrieve the correct periphid.
arm,primecell-periphid were removed from the etm nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sherry Sun [Tue, 27 Jun 2023 02:53:31 +0000 (10:53 +0800)]
arm64: dts: imx93: add "fsl,imx8ulp-lpuart" compatible for imx93
i.MX93 and i.MX8ULP lpuart add some new featurs based on i.MX7ULP, for
example, i.MX93 and i.MX8ULP can support EOP(end-of-packet) function
while i.MX7ULP doesn't support, so add "fsl,imx8ulp-lpuart" compatible
string for i.MX93 to support those new features.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sherry Sun [Tue, 27 Jun 2023 02:53:30 +0000 (10:53 +0800)]
arm64: dts: imx8dxl: remove "fsl,imx7ulp-lpuart" compatible for imx8dxl
Drop the i.MX8DXL backwards compatibility with i.MX7ULP since they
differ from clocks handling point of view.
dtbs_check has the following warnings:
linux-next/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a060000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx8qxp-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' was expected
'fsl,imx8qxp-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imxrt1050-lpuart' was expected
'fsl,imx8ulp-lpuart' was expected
'fsl,imx8qxp-lpuart' was expected
'fsl,imxrt1170-lpuart' was expected
From schema: linux-next/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 21 Jun 2023 17:37:11 +0000 (14:37 -0300)]
arm64: dts: imx8mn-evk: Pass GPIO_OPEN_DRAIN flag
scl-gpios and sda-gpios need GPIO_OPEN_DRAIN flag, otherwise the
following run-time warning is seen:
gpio-144 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
gpio-146 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Yannic Moog [Fri, 16 Jun 2023 09:50:08 +0000 (11:50 +0200)]
arm64: dts: phycore-imx8mm: fix nor mtd partitions
Add #address-cells and #size-cells properties to som_flash. This
enables correct parsing of added SPI NOR mtd partition child nodes that
are set in the bootloader.
Adam Ford [Thu, 15 Jun 2023 21:53:12 +0000 (16:53 -0500)]
arm64: dts: imx8mm-beacon: Change camera I2C address
The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Fri, 9 Jun 2023 19:52:19 +0000 (12:52 -0700)]
arm64: dts: imx8mp-venice-gw74xx: update to revB PCB
Update the imx8mp-venice-gw74xx for revB:
- add CAN1
- add TIS-TPM on SPI2
- add FAN controller
- fix PMIC I2C bus (revA PMIC I2C was non-functional so no need for
backward compatible option)
- M2 socket GPIO's moved
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Tue, 6 Jun 2023 15:38:19 +0000 (08:38 -0700)]
arm64: dts: imx8mm-venice-gw7904: enable UART1 hardware flow control
On the GW7904 uart1 can use UART3_TX/RX for hardware flow control
which was the desired default configuration. Remove uart3 and configure
uart1 for hardware flow control.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Mon, 5 Jun 2023 21:49:13 +0000 (18:49 -0300)]
arm64: dts: imx8mq-librem5: Use 'vqmmc-supply'
'power-supply' is an invalid property for usdhc and it gives
the following schema warning:
imx8mq-librem5-r2.dtb: mmc@30b40000: Unevaluated properties are not allowed ('power-supply' was unexpected)
From schema: Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
Change it to 'vqmmc-supply', which represents the supply for the bus IO.
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
Merge tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
Merge tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
Merge tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
fork: lock VMAs of the parent process when forking
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
mm: lock newly mapped VMA which can be modified after it becomes visible
mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock. This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified. Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.
Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.
With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
Merge tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- xiic patch should have been in the original pull but slipped through
- mpc patch fixes a build regression
- nomadik cleanup
* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Drop unused variable
i2c: nomadik: Remove a useless call in the remove function
i2c: xiic: Don't try to handle more interrupt events after error
Merge tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Check for NULL bdev in LoadPin (Matthias Kaehlcke)
- Revert unwanted KUnit FORTIFY build default
- Fix 1-element array causing boot warnings with xhci-hub
* tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array
Revert "fortify: Allow KUnit test to build without FORTIFY"
dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com> Suggested-by: Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
- Update AMD IBS event error message since it now support per-process
profiling but no priviledge filters.
$ sudo perf record -e ibs_op//k -C 0
Error:
AMD IBS doesn't support privilege filtering. Try again without
the privilege modifiers (like 'k') at the end.
- Add --output option to save the data to a file not to be interfered
by other debug messages.
Test:
- Fix event parsing test on ARM where there's no raw PMU nor supports
PERF_PMU_CAP_EXTENDED_HW_TYPE.
- Update the lock contention test case for CSV output.
- Fix a segfault in the daemon command test.
Vendor events (JSON):
- Add has_event() to check if the given event is available on system
at runtime. On Intel machines, some transaction events may not be
present when TSC extensions are disabled.
- Update Intel event metrics.
Misc:
- Sort symbols by name using an external array of pointers instead of
a rbtree node in the symbol. This will save 16-bytes or 24-bytes
per symbol whether the sorting is actually requested or not.
- Fix unwinding DWARF callstacks using libdw when --symfs option is
used"
* tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (38 commits)
perf test: Fix event parsing test when PERF_PMU_CAP_EXTENDED_HW_TYPE isn't supported.
perf test: Fix event parsing test on Arm
perf evsel amd: Fix IBS error message
perf: unwind: Fix symfs with libdw
perf symbol: Fix uninitialized return value in symbols__find_by_name()
perf test: Test perf lock contention CSV output
perf lock contention: Add --output option
perf lock contention: Add -x option for CSV style output
perf lock: Remove stale comments
perf vendor events intel: Update tigerlake to 1.13
perf vendor events intel: Update skylakex to 1.31
perf vendor events intel: Update skylake to 57
perf vendor events intel: Update sapphirerapids to 1.14
perf vendor events intel: Update icelakex to 1.21
perf vendor events intel: Update icelake to 1.19
perf vendor events intel: Update cascadelakex to 1.19
perf vendor events intel: Update meteorlake to 1.03
perf vendor events intel: Add rocketlake events/metrics
perf vendor metrics intel: Make transaction metrics conditional
perf jevents: Support for has_event function
...
The tests that don't use expect_eq() macro to determine that a test
is failured must increment failed_tests explicitly.
- lib/bitmap: drop optimization of bitmap_{from,to}_arr64
bitmap_{from,to}_arr64() optimization is overly optimistic
on 32-bit LE architectures when it's wired to
bitmap_copy_clear_tail().
- nodemask: Drop duplicate check in for_each_node_mask()
As the return value type of first_node() became unsigned, the node
>= 0 became unnecessary.
- cpumask: fix function description kernel-doc notation
- MAINTAINERS: Add bits.h and bitfield.h to the BITMAP API record
Add linux/bits.h and linux/bitfield.h for visibility"
* tag 'bitmap-6.5-rc1' of https://github.com/norov/linux:
MAINTAINERS: Add bitfield.h to the BITMAP API record
MAINTAINERS: Add bits.h to the BITMAP API record
cpumask: fix function description kernel-doc notation
nodemask: Drop duplicate check in for_each_node_mask()
lib/bitmap: drop optimization of bitmap_{from,to}_arr64
lib/test_bitmap: increment failure counter properly
Commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated
kmalloc space than requested") added precise kmalloc redzone poisoning to
the slub_debug functionality.
However, this commit didn't account for HW_TAGS KASAN fully initializing
the object via its built-in memory initialization feature. Even though
HW_TAGS KASAN memory initialization contains special memory initialization
handling for when slub_debug is enabled, it does not account for in-object
slub_debug redzones. As a result, HW_TAGS KASAN can overwrite these
redzones and cause false-positive slub_debug reports.
To fix the issue, avoid HW_TAGS KASAN memory initialization when
slub_debug is enabled altogether. Implement this by moving the
__slub_debug_enabled check to slab_post_alloc_hook. Common slab code
seems like a more appropriate place for a slub_debug check anyway.
Link: https://lkml.kernel.org/r/678ac92ab790dba9198f9ca14f405651b97c8502.1688561016.git.andreyknvl@google.com Fixes: 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Will Deacon <will@kernel.org> Acked-by: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: kasan-dev@googlegroups.com Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Collingbourne <pcc@google.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13
builtins") introduced a bug into the memory_is_poisoned_n implementation:
it effectively removed the cast to a signed integer type after applying
KASAN_GRANULE_MASK.
As a result, KASAN started failing to properly check memset, memcpy, and
other similar functions.
Fix the bug by adding the cast back (through an additional signed integer
variable to make the code more readable).
I am going to lose my vrull.eu address at the end of july, and while
adding it to mailmap I also realised that there are more old addresses
from me dangling, so update .mailmap for all of them.
Liu Shixin [Tue, 4 Jul 2023 10:19:42 +0000 (18:19 +0800)]
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
commit dd0ff4d12dd2 ("bootmem: remove the vmemmap pages from kmemleak in
put_page_bootmem") fix an overlaps existing problem of kmemleak. But the
problem still existed when HAVE_BOOTMEM_INFO_NODE is disabled, because in
this case, free_bootmem_page() will call free_reserved_page() directly.
Fix the problem by adding kmemleak_free_part() in free_bootmem_page() when
HAVE_BOOTMEM_INFO_NODE is disabled.
Link: https://lkml.kernel.org/r/20230704101942.2819426-1-liushixin2@huawei.com Fixes: f41f2ed43ca5 ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
writeback: account the number of pages written back
nr_to_write is a count of pages, so we need to decrease it by the number
of pages in the folio we just wrote, not by 1. Most callers specify
either LONG_MAX or 1, so are unaffected, but writeback_sb_inodes() might
end up writing 512x as many pages as it asked for.
Dave added:
: XFS is the only filesystem this would affect, right? AFAIA, nothing
: else enables large folios and uses writeback through
: write_cache_pages() at this point...
:
: In which case, I'd be surprised if much difference, if any, gets
: noticed by anyone.
Link: https://lkml.kernel.org/r/20230628185548.981888-1-willy@infradead.org Fixes: 793917d997df ("mm/readahead: Add large folio readahead") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit c145e0b47c77 ("mm: streamline COW logic in do_swap_page()") moved
the call to swap_free() before the call to set_pte_at(), which meant that
the MTE tags could end up being freed before set_pte_at() had a chance to
restore them. Fix it by adding a call to the arch_swap_restore() hook
before the call to swap_free().
Link: https://lkml.kernel.org/r/20230523004312.1807357-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I6470efa669e8bd2f841049b8c61020c510678965 Fixes: c145e0b47c77 ("mm: streamline COW logic in do_swap_page()") Signed-off-by: Peter Collingbourne <pcc@google.com> Reported-by: Qun-wei Lin <Qun-wei.Lin@mediatek.com> Closes: https://lore.kernel.org/all/5050805753ac469e8d727c797c2218a9d780d434.camel@mediatek.com/ Acked-by: David Hildenbrand <david@redhat.com> Acked-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> [6.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Migration replaces the page in the mapping before copying the contents and
the flags over from the old page, so check that the page in the page cache
is really up to date before using it. Without this, stressing squashfs
reads with parallel compaction sometimes results in squashfs reporting
data corruption.
Link: https://lkml.kernel.org/r/20230629-squashfs-cache-migration-v1-1-d50ebe55099d@axis.com Fixes: e994f5b677ee ("squashfs: cache partial compressed blocks") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
That happens because a BUG() statement in huge_pte_alloc() attempts to
check that a pte, if present, is a hugetlb pte, but it does so in a
non-lockless-safe manner that leads to a false BUG() report.
We got here due to a couple of bugs, each of which by itself was not quite
enough to cause a problem:
First of all, before commit c33c794828f2("mm: ptep_get() conversion"), the
BUG() statement in huge_pte_alloc() was itself fragile: it relied upon
compiler behavior to only read the pte once, despite using it twice in the
same conditional.
Next, commit c33c794828f2 ("mm: ptep_get() conversion") broke that
delicate situation, by causing all direct pte reads to be done via
READ_ONCE(). And so READ_ONCE() got called twice within the same BUG()
conditional, leading to comparing (potentially, occasionally) different
versions of the pte, and thus to false BUG() reports.
Fix this by taking a single snapshot of the pte before using it in the
BUG conditional.
Now, that commit is only partially to blame here but, people doing
bisections will invariably land there, so this will help them find a fix
for a real crash. And also, the previous behavior was unlikely to ever
expose this bug--it was fragile, yet not actually broken.
So that's why I chose this commit for the Fixes tag, rather than the
commit that created the original BUG() statement.
Link: https://lkml.kernel.org/r/20230701010442.2041858-1-jhubbard@nvidia.com Fixes: c33c794828f2 ("mm: ptep_get() conversion") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Acked-by: James Houghton <jthoughton@google.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The ocfs2-devel mailing list has been migrated to the kernel.org
infrastructure, update all related documentation pointers to reflect the
change.
Link: https://lkml.kernel.org/r/20230628013437.47030-3-ailiop@suse.com Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MAINTAINERS: update ocfs2-devel mailing list address
The ocfs2-devel mailing list has been migrated to the kernel.org
infrastructure, update the related entry to reflect the change.
Link: https://lkml.kernel.org/r/20230628013437.47030-2-ailiop@suse.com Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86. Disable per-VMA locks config to
prevent this issue until the fix is confirmed. This is expected to be a
temporary measure.
fork: lock VMAs of the parent process when forking
Patch series "Avoid memory corruption caused by per-VMA locks", v4.
A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86. Based on the reproducer
provided in [1] we suspect this is caused by the lack of VMA locking while
forking a child process.
Patch 1/2 in the series implements proper VMA locking during fork. I
tested the fix locally using the reproducer and was unable to reproduce
the memory corruption problem.
This fix can potentially regress some fork-heavy workloads. Kernel build
time did not show noticeable regression on a 56-core machine while a
stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~7% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Patch 2/2 disables per-VMA locks until the fix is tested and verified.
This patch (of 2):
When forking a child process, parent write-protects an anonymous page and
COW-shares it with the child being forked using copy_present_pte().
Parent's TLB is flushed right before we drop the parent's mmap_lock in
dup_mmap(). If we get a write-fault before that TLB flush in the parent,
and we end up replacing that anonymous page in the parent process in
do_wp_page() (because, COW-shared with the child), this might lead to some
stale writable TLB entries targeting the wrong (old) page. Similar issue
happened in the past with userfaultfd (see flush_tlb_page() call inside
do_wp_page()).
Lock VMAs of the parent process when forking a child, which prevents
concurrent page faults during fork operation and avoids this issue. This
fix can potentially regress some fork-heavy workloads. Kernel build time
did not show noticeable regression on a 56-core machine while a stress
test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~7%
regression. If such fork time regression is unacceptable, disabling
CONFIG_PER_VMA_LOCK should restore its performance. Further optimizations
are possible if this regression proves to be problematic.
Link: https://lkml.kernel.org/r/20230706011400.2949242-1-surenb@google.com Link: https://lkml.kernel.org/r/20230706011400.2949242-2-surenb@google.com Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: David Hildenbrand <david@redhat.com> Reported-by: Jiri Slaby <jirislaby@kernel.org> Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/ Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/ Reported-by: Jacob Young <jacobly.alt@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=3D217624 Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Holger Hoffsttte <holger@applied-asynchrony.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Geoff Levand [Thu, 29 Jun 2023 23:32:44 +0000 (23:32 +0000)]
ntb.rst: Fix copy and paste error
It seems the text for the NTB MSI Test Client section was copied from the
NTB Tool Test Client, but was not updated for the new section. Corrects
the NTB MSI Test Client section text.
Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Jon Mason <jdmason@kudzu.us>
Geoff Levand [Fri, 30 Jun 2023 21:58:46 +0000 (21:58 +0000)]
ntb_netdev: Fix module_init problem
With both the ntb_transport_init and the ntb_netdev_init_module routines in the
module_init init group, the ntb_netdev_init_module routine can be called before
the ntb_transport_init routine that it depends on is called. To assure the
proper initialization order put ntb_netdev_init_module in the late_initcall
group.
Fixes runtime errors where the ntb_netdev_init_module call fails with ENODEV.
Signed-off-by: Geoff Levand <geoff@infradead.org> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cai Huoqing [Fri, 24 Mar 2023 01:32:20 +0000 (09:32 +0800)]
ntb: intel: Remove redundant pci_clear_master
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
Cai Huoqing [Fri, 24 Mar 2023 01:32:19 +0000 (09:32 +0800)]
ntb: epf: Remove redundant pci_clear_master
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
Cai Huoqing [Fri, 24 Mar 2023 01:32:18 +0000 (09:32 +0800)]
ntb_hw_amd: Remove redundant pci_clear_master
Remove pci_clear_master to simplify the code,
the bus-mastering is also cleared in do_pci_disable_device,
like this:
./drivers/pci/pci.c:2197
static void do_pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
Bjorn Helgaas [Tue, 7 Mar 2023 20:30:21 +0000 (14:30 -0600)]
ntb: idt: drop redundant pci_enable_pcie_error_reporting()
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration, so the
driver doesn't need to do it itself.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this only controls ERR_* Messages from the device. An ERR_*
Message may cause the Root Port to generate an interrupt, depending on the
AER Root Error Command register managed by the AER service driver.
ruanjinjie [Wed, 9 Nov 2022 09:28:52 +0000 (17:28 +0800)]
NTB: EPF: fix possible memory leak in pci_vntb_probe()
As ntb_register_device() don't handle error of device_register(),
if ntb_register_device() returns error in pci_vntb_probe(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop the
reference count that was set in device_initialize()
when it fails, so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
projects / thirdparty / linux.git / log
