Marko Lindqvist [Sun, 17 Feb 2013 08:53:10 +0000 (10:53 +0200)]
curl: update to upstream version 7.29.0
- obsolete_automake_macros.patch removed as it's part of upstream.
- dont_override_ac_config_macro_dir.patch removed as no longer needed.
- pkgconfig_fix.patch updated to apply cleanly
Marko Lindqvist [Sun, 17 Feb 2013 08:52:21 +0000 (10:52 +0200)]
oprofileui-server: replace obsolete automake macros with working ones
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
Marko Lindqvist [Sun, 17 Feb 2013 08:51:23 +0000 (10:51 +0200)]
webkit-gtk: replace obsolete automake macros with working ones
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
Removed AM_PROG_CC_STDC. AC_PROG_CC to replace it was already
present.
Song.Li [Fri, 22 Feb 2013 10:52:19 +0000 (18:52 +0800)]
pakcage.bbclass:use a better way to cut -dev/-dbg suffix
In pakcage.bbclass,function replace('-dev', '') is
used to cut '-dev' suffix. but it will cause the
name "lib32-device-dev" to "lib32ice",
so change it to [:-4].
Paul Eggleton [Thu, 21 Feb 2013 15:23:35 +0000 (15:23 +0000)]
bitbake: build.py: avoid deleting taint files when writing stamps
The stamp cleaning process that occurs before writing out new stamps for
a task was deleting taint files as well. This resulted in tasks that
were forcibly re-executed using the -f or -C command line options to
have their previous output restored from shared state when called upon a
second time, because the taint value was no longer incorporated into the
task signature and thus it was reverting to its previous value. This
also affected the kernel menuconfig command in OE-Core.
Note that the taint file *is* still deleted when doing -c clean, which
is the desired behaviour.
Richard Purdie [Wed, 20 Feb 2013 07:05:11 +0000 (23:05 -0800)]
bitbake: Revert "fetch2: Adapt encode/decode url to use URI class"
This reverts commit 21fe2683aefde10e847e66c11c26d4f4c1e07cfd
since bitbake-selftest doesn't pass when this is applied and
we're seeing multiple build failures from this change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 19 Feb 2013 21:31:52 +0000 (21:31 +0000)]
rootfs_ipkg: fix BAD_RECOMMENDATIONS handling
If multiple versions of the same package are in the package feed then the
generate status file would only contains a "deinstall" status for the last one,
which meant that BAD_RECOMMENDATIONS wouldn't actually work.
Use awk instead of grep and stop reading when we reach a newline, so we only
ever output a single stanza.
Laurentiu Palcu [Tue, 19 Feb 2013 14:15:03 +0000 (16:15 +0200)]
toolchain-scripts.bbclass: add PYTHONHOME variable to environment-setup
When relocating the SDK, applications using python will search for
python modules in the default location and will fail to start.
The below errors are thrown by gdb, for example:
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site
In order to overcome this, add the PYTHONHOME variable to the
environment-setup script for both standalone toolchain and
adt-installer. No need to do that for meta-ide-support environment
script since this toolchain does not get relocated.
Otavio Salvador [Sun, 17 Feb 2013 17:53:09 +0000 (17:53 +0000)]
dbus: Drop x11 support from nativesdk
This avoid a libx11 dependency for nativesdk as it is not intended to
be run in the toolchain. We also remove the dbus-launch as without x11
support it might case trouble for user
Richard Purdie [Mon, 18 Feb 2013 13:19:50 +0000 (13:19 +0000)]
devshell.bbclass: Allow running devshell and fakeroot together
Currently its hard to run a devshell complete with fakeroot context. This
patch allows the fakeroot flag on the task to do this, as with any other
task. Since we may need to start X terminal applications, we need to
only start the fakeroot session on the final command, hence the hoops
this code jumps through.
As always with fakeroot, you can break out and run a command without
the fake permissions with syntax like "PSEUDO_UNLOAD=1 <command>"
Laurentiu Palcu [Mon, 18 Feb 2013 11:40:12 +0000 (11:40 +0000)]
populate_sdk_base.bbclass: fix SDKTARGETSYSROOT value
Currently, SDKTARGETSYSROOT points to PACKAGE_ARCH which, sometimes, can
be set to MACHINE_ARCH. When this happens, the default target sysroot
passed to the cross-canadian toolchain, which points to TUNE_PKGARCH,
will be different from the directory where the target sysroot has been
deployed.
In order to fix this, use REAL_MULTIMACH_TARGET_SYS variable instead of
MULTIMACH_TARGET_SYS.
Peter Seebach [Sun, 17 Feb 2013 23:31:33 +0000 (23:31 +0000)]
pseudo.inc: pseudo 1.5 uprev, support extra config flags
The pseudo 1.5 update is a moderately experimental set of changes
which ought to improve performance. With these changes, pseudo
uses an in-memory sqlite database which is lushed on exit,
the protocol is changed to reduce waiting for server responses,
and pseudo can suppress any and all fsync/fdatasync type operations.
This last feature is optional, and not on by default, so we need
to pass in an extra configure argument, but that argument wouldn't
be known to an older configure, so... Enter PSEUDO_EXTRA_OPTS which
is passed to configure, and which pseudo_1.5.bb sets by default to
"--enable-force-async". (I haven't added it in pseudo_git.bb, but
maybe it should be changed; I'm not quite as sure there.)
The justification for these changes is that, for most of the real-world
build cases I deal with, they produce a 25% or more reduction in the
build time of a project. This increases when a system is heavily
loaded.
Otavio Salvador [Sun, 17 Feb 2013 17:53:12 +0000 (17:53 +0000)]
meta-toolchain-qt.inc: Use CXX when linking
We should use CXX compiler when linking objects as done in regular
builds inside of OE-Core. This fixes issues we've been seeing in field
where we needed to change it byhand so the toolchain could work.
Olof Johansson [Tue, 29 Jan 2013 07:50:11 +0000 (08:50 +0100)]
bitbake: fetch2: Add SFTP fetcher
This fetcher differs from the SSH fetcher in that it adheres more
strictly to the SECSH URI internet draft --- it uses the sftp://
instead of the ssh:// scheme, and it uses sftp instead of scp.
Olof Johansson [Tue, 29 Jan 2013 07:50:07 +0000 (08:50 +0100)]
bitbake: fetch2: Add a class representing a generic URI
A class representing a generic URI, with methods for accessing the URI
components, and stringifies to the URI. This class should be a bit more
flexible than the existing {encode,decode}_url functions in that it
supports more components (e.g. port) and that it does not rely on a
specific order on the return values. This makes it easy to add new
properties without affecting the API.
Richard Purdie [Sun, 17 Feb 2013 09:00:29 +0000 (09:00 +0000)]
package_rpm/dev/ipk/tar: Drop unused functions
The package_xxx_install functions date from a different era and are not used by
anything. In the rpm case, they're simply unimplemented, in the tar case they're
using broken whitespace and deprecated functions. We might as well clean
out the old broken unused code.
Richard Purdie [Sun, 17 Feb 2013 08:57:17 +0000 (08:57 +0000)]
package_rpm/deb/ipk: Error if we don't find packages when creating the package index
If for whatever reason the package directory is empty of packages, it
makes sense to error early rather than later in what become much
more obtuse errors. This adds in a sanity check to each of the packaging
backends. It also removes the duplicate createrepo call since the
core index creation function now uses this directly after the switch
to smart.
Richard Purdie [Fri, 15 Feb 2013 12:30:39 +0000 (12:30 +0000)]
local.conf.sample: Enhance the SSTATE_MIRRORS example
By using downloadfilename in the url, symlinks in the download
directory can be avoided and hence directories with large numbers
of files are less likely.
Khem Raj [Thu, 14 Feb 2013 04:02:00 +0000 (04:02 +0000)]
systemd.bbclass: Dont use libdir and base_libdir for units
systemd always uses /lib and /usr/lib to store unit files
so using libdir and base_libdir is incorrect. It will work
where libdir is usr/lib and base_libdir is /lib but wont work
when say its /lib64
Add a check to make sure that SYSTEMD_PACKAGES are part of PACKAGES
too, otherwise error out
Cristiana Voicu [Tue, 12 Feb 2013 13:27:32 +0000 (15:27 +0200)]
sanity.bbclass: when bblayers.conf is updated, it invokes a reparse
When bblayers.conf is updated(when sanity check is running), it should
tell to bitbake to reparse configuration files. I will send a patch to
bitbake-devel, with the actions needed in bitbake and hob.
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Marko Lindqvist [Wed, 13 Feb 2013 11:26:18 +0000 (13:26 +0200)]
libpng: update to upstream version 1.5.14
obsolete_automake_macros.patch removed as it's not part of upstream.
The only changes to license texts are latest libpng version number
and release dates.
Laurentiu Palcu [Wed, 13 Feb 2013 09:33:32 +0000 (11:33 +0200)]
xev: upgrade to 1.2.1
Licence didn't change, the end line for computing the licence md5sum was
inside the actual code which, eventually changed. Adjust it to the right
line.
ERROR: No new tasks can be excuted since the disk space monitor action
is "STOPTASKS"!
ERROR: Unknown event: <bb.event.DiskFull object at 0x2ab6310>
This is because we don't handle the event bb.event.DiskFull in
knotty.py, we don't want the knotty to do anything here since we have
done everything in monitordisk.py, so just ignore this event would fix
the problem.
Robert Yang [Wed, 6 Feb 2013 09:28:16 +0000 (17:28 +0800)]
bitbake: bitbake-layers: make show-cross-depends avoid long path
The "bitbake-layers show-cross-depends" print the absolute path in the
past, now it will print the relative path (relative to the layer dir) by
default, and add the "-f" option to make it print the absolute path.
Robert Yang [Mon, 4 Feb 2013 10:03:35 +0000 (18:03 +0800)]
bitbake: monitordisk.py: disable the inode checking for some fs
There is an error when use disk monitor on btrfs:
WARNING: The free inode of rootfs is running low (0.000K left)
ERROR: Immediately abort since the disk space monitor action is "ABORT"!
This is beucase some fs formats' statvfs.f_files (inodes) is zero, thus
the statvfs.f_favail (free inodes) is zero, too, this a feature of the
fs, we disable the inode checking for such a fs.
Richard Purdie [Thu, 14 Feb 2013 21:38:17 +0000 (21:38 +0000)]
bitbake: fetch2: Improve lock/done stamp file paths for local files
Currently stamps end up at the top level of DL_DIR even if the files
themselves are in a directory structure. This patch preserves path
components allowing the top level directory to be less populated
which is an advantage for large sstate caches.
I've sent a patch to poky, with some changes in sanity.bbclass. When bblayers.conf
is updated, it updates also a variable to know when to reparse configuration files.
This patch contains the changes to reparse conf files, after a sanity check which
changes bblayers.conf.
Richard Purdie [Thu, 14 Feb 2013 21:35:25 +0000 (21:35 +0000)]
bitbake: tests/codeparser: Hack around circular inclusion problem
There is a circular dependency issue where bb.data can't directly depend on
bb.parse. The tests were failing due to this issue which is misleading. This
patch hacks around it for now. I'd rather that than not running tests at all.
Richard Purdie [Thu, 14 Feb 2013 21:33:04 +0000 (21:33 +0000)]
bitbake: wget: Only use -O option when not spidering
If we pass the -O option whilst spidering, empty files are created which is not
desired. We also need to ensure any subdirectories are created when using the
downloadfilename parameter.
The bb.utils.contains function usage is getting increasingly used in the metadata
but isn't handled automatically by the python dependency tracking code. This patch
changes that and also adds the "OE" names for the functions.
Whilst there are reasons this is a bad idea, its likely outweighed by the
shear number of these references and the current holes in dependency information
which we're now relying heavily upon.
Otavio Salvador [Fri, 8 Feb 2013 14:52:20 +0000 (14:52 +0000)]
tzdata: Simplify code removing not used cases
We shouldn't have an use-case where we'd use 'FUBAR' timezone so
instead of adding postinst handling for this use case we handle it at
install time and keep the Universal as fallback if user did something
wrong.
This also ensure the /etc/localtime file is kept as a symbolic link.
This will make timezone not available when /usr is in separated
partition (and not mounted) however the applications ought to fallback
to GMT timezone in this case and when /usr is made availble timezone
will work fine.
Otavio Salvador [Fri, 8 Feb 2013 14:52:19 +0000 (14:52 +0000)]
tzdata: We shouldn't override the localtime if it is valid
The code where mistakenly replacing the localtime file setting so we
end with a copy of file instead of a symbolic link. This fixes it so
now, we'll only do that in case the link is pointing to invalid data.
Saul Wold [Thu, 14 Feb 2013 22:12:51 +0000 (14:12 -0800)]
remake: do not create po files
The 'make update' was using wget to get the gmo and other gnu files from
upstream, since need to work cleanly in a non-networked or proxy environment
this does not so well. Remove the list of languages from the LINGUAS file.
Scott Rifenbark [Tue, 12 Feb 2013 23:03:25 +0000 (17:03 -0600)]
dev-manual: Revision of "Team Environment" section.
Fixes YOCTO #3274
First draft of a re-written section that describes best
practices for scaling the YP over a large development
effort. this draft is based on Richard Purdie's text
he sent to me.
Scott Rifenbark [Mon, 11 Feb 2013 22:30:44 +0000 (14:30 -0800)]
template: Changed the font color for footers and headers
Fixes YOCTO #3728
The poky-db-pdf.xsl file has code that controls the font color
for the headers, footers, and separating lines for each when
the PDF version of a manual is made. I changed the values
from #cccccc to #999999 to darken these up so they can be
seen a little better.
Scott Rifenbark [Mon, 11 Feb 2013 20:20:20 +0000 (12:20 -0800)]
dev-manual, bsp-guide: Added some links
Fixes YOCTO #3552
Added some links to the FILESEXTRAPATHS and SRC_URI variables.
These links connect appropriate sections to a newly improved
section on FILESEXTRAPATHS glossary description.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
