Alan Modra [Thu, 28 Mar 2013 07:07:25 +0000 (07:07 +0000)]
* elf32-ppc.c (struct ppc_dyn_relocs): New.
(ppc_elf_check_relocs): Separate dynrel counts for local syms
into ifunc and non-ifunc.
(allocate_dynrelocs): Always put ifunc relocs into reliplt.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
Alan Modra [Wed, 27 Mar 2013 13:25:48 +0000 (13:25 +0000)]
* elf32-ppc.c (ppc_elf_check_relocs): Set PLT_IFUNC in local got
masks for all local ifunc syms.
(allocate_dynrelocs): Don't use htab->relgot for ifunc.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relocate_section): Likewise.
Pedro Alves [Wed, 27 Mar 2013 12:14:09 +0000 (12:14 +0000)]
Forbid "set history size (INT_MAX..UINT_MAX)"
The whole readline interface is signed, and works with the 0..INT_MAX
range.
We don't allow setting the size to UINT_MAX directly. The documented
user visible interface is "use 0 for unlimited". The UINT_MAX
representation is an implementation detail we could change, e.g., by
keeping a separate flag for "unlimited", which is actually what the
readline interface does (stifled vs non stifled). Generically
speaking, exposing this detail to clients of the interface may make
our lives complicated when we find the need to extend the range of
some command in the future, and it's better if users
(frontends/scripts) aren't relying on anything but what we tell them
to use for "unlimited". Making values other than 0 error out is the
way to prevent users from using those ranges inappropriately. Quite
related, note:
(gdb) set history size 0xffffffff
integer 4294967295 out of range
But,
(gdb) set history size 0xfffffffe
(gdb) show history size
The size of the command history is unlimited.
(gdb) set history size 0x100000000
integer 4294967296 out of range
If values over INT_MAX are accepted as unlimited, then there's no good
argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited"
magic numbers, while not accepting [UINT_MAX..inf).
Making the setting's control variable of different type (unsigned int)
of the rest of the related code (int) adds the need to recall that one
variable among all these is unsigned, and that one need to think about
whether these comparisons are signed or unsigned, along with the
promotion/conversion rules. Since this is an easy to forget detail,
this patch renames the variable to at least make it more obvious that
this variable is not one of GNU history's public int variables, which
are all signed. We don't actually need the only code that presently
is affected by this, though, the code that is computing the current
history's length. We can just use GNU history's history_length
instead:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Variable: int history_length
The number of entries currently stored in the history list.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/* Return the history entry which is logically at OFFSET in the history array.
OFFSET is relative to history_base. */
HIST_ENTRY *
history_get (offset)
int offset;
{
int local_index;
At the time this code was added (gdb 4.13 ~1994), 'history_length' was
extern, but not documented in readline's GNU history documents, so I
guess it wasn't considered public then and the loop was the
workaround.
One of the warts of GDB choosing 0 to mean unlimited is that "set
history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter
leaves GDB with no history, while the former means "unlimited"...
$ HISTSIZE=0 ./gdb
...
(gdb) show history size
The size of the command history is 0.
We shouldn't really change what HISTSIZE=0 means, as bash, etc. also
handle 0 as real zero, and zero it's what really makes sense.
gdb/
2013-03-27 Pedro Alves <palves@redhat.com>
* top.c (history_size): Rename to ...
(history_size_setshow_var): ... this. Add comment.
(show_commands): Use readline's 'history_length' instead of
computing the history length by calling history_get in a loop.
(set_history_size_command): Error out for sizes over INT_MAX.
Restore previous history size on invalid size.
(init_history): If HISTSIZE is negative, leave the history size as
zero. Add comments.
(init_main): Adjust.
Will Newton [Wed, 27 Mar 2013 09:51:46 +0000 (09:51 +0000)]
bfd/ChangeLog:
2013-03-20 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_final_link_relocate): Avoid emitting a
dynamic reloc for symbols with dynindx == -1.
(allocate_dynrelocs_for_symbol): Avoid allocating space for a
dynamic reloc for symbols with dynindx == -1.
Will Newton [Wed, 27 Mar 2013 09:48:46 +0000 (09:48 +0000)]
bfd/ChangeLog:
2013-03-20 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_final_link_relocate): Avoid emitting a
dynamic reloc for symbols with dynindx == -1.
(allocate_dynrelocs_for_symbol): Avoid allocating space for a
dynamic reloc for symbols with dynindx == -1.
Pedro Alves [Tue, 26 Mar 2013 20:19:31 +0000 (20:19 +0000)]
Make "set/show remoteaddresssize" a zuinteger command instead of uinteger.
It makes no sense to talk about an "unlimited" address size in this
context.
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is 0.
(gdb) set remoteaddresssize 0
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is unlimited.
"set remoteaddresssize 0" mapping to UINT_MAX means you can't
force gdb through this path twice in the same GDB run:
Pedro Alves [Tue, 26 Mar 2013 20:01:03 +0000 (20:01 +0000)]
record-full.c: Remove always true checks.
The "set record full insn-number-max" command is an uinteger command.
If the variable that holds the maximum count of logged instructions is
unsigned, it's better if the variable that holds the current number of
logged instructions is also unsigned. Looking over the code, there's
no case the variable could end up negative.
Then, tests like "if (record_full_insn_max_num)" are always true,
because being a uinteger command means that "set record full
insn-number-max 0" is actually mapped to UINT_MAX internally. IOW,
the command's variable is never 0. The checks might make some sense
if 0 wasn't mapped to UINT_MAX, and 0 meant unlimited, but, that's not
how things work.
Tested on x86_64 Fedora 17.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* record-full.c (record_full_insn_num): Make it unsigned.
(record_full_check_insn_num, record_full_message)
(record_full_registers_change, record_full_xfer_partial): Remove
record_full_insn_max_num check (it's always != 0).
(record_full_info, record_full_restore): Use %u as format string.
(): Use %u as format string.
(set_record_full_insn_max_num): Remove record_full_insn_max_num
check (it's always != 0).
Pedro Alves [Tue, 26 Mar 2013 18:40:46 +0000 (18:40 +0000)]
Make "set/show debug coff_pe_read" a zuinteger instead of uinteger.
Being a uinteger means you can't disable debug output after enabling it...
(gdb) show debug coff_pe_read
Coff PE read debugging is 0.
(gdb) set debug coff_pe_read 0
(gdb) show debug coff_pe_read
Coff PE read debugging is unlimited.
(gdb)
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* coff-pe-read.c (_initialize_coff_pe_read): Make the command
zuinteger instead of uinteger.
Pedro Alves [Tue, 26 Mar 2013 18:26:05 +0000 (18:26 +0000)]
Get rid of "No such file or directory" in the testsuite's btrace support detection.
When I tried running the btrace tests, I noticed something odd in the gdb.log file:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.x
Breakpoint 1, main () at /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.c:1
1 /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.c: No such file or directory.
^^^^^^^^^^^^^^^^^^^^^^^^^
(gdb) record btrace
Target does not support branch tracing.
(gdb) testcase ../../../src/gdb/testsuite/gdb.btrace/enable.exp completed in 0 seconds
I knew that the btrace tests on my machine weren't supposed to work,
but still, that error made me wonder if the test had something broken,
and waste a few minutes looking up where that is coming from.
The issue is that the btrace detection deletes the source file right
after compiling it, and before GDB has a chance to open it. It's
really harmless, but I'd rather spare others from going through the
same exercise.
We now get the regular:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace24210.x
...
Breakpoint 1, main () at /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace24210.c:1
1 int main(void) { return 0; }
...
gdb/testsuite/
2013-03-26 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (skip_btrace_tests): Delay deleting the source file
until after GDB has run.
Pedro Alves [Tue, 26 Mar 2013 18:03:03 +0000 (18:03 +0000)]
"set record instruction-history-size"/"set record function-call-history-size" range validation.
While the commands are uinteger, the target interfaces are limited to
INT_MAX. Don't let the user request more than we can handle.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* record.c (record_insn_history_size_setshow_var)
(record_call_history_size_setshow_var): New globals.
(command_size_to_target_size): New function.
(cmd_record_insn_history, cmd_record_call_history): Use
command_size_to_target_size instead of cast.
(validate_history_size, set_record_insn_history_size)
(set_record_call_history_size): New functions.
(_initialize_record): Install set_record_insn_history_size and
set_record_call_history_size as "set" hooks of "set record
instruction-history-size" and "set record
function-call-history-size".
Mike Frysinger [Tue, 26 Mar 2013 18:00:04 +0000 (18:00 +0000)]
sim: rewrite SIM_AC_OPTION_HARDWARE a bit to simplify things
There's no need to put the majority of the logic into the 3rd arg of the
AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to
follow, error prone to update, and duplicates code (with the 4th arg).
So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE
macro. This allows us to gut the 4th arg entirely, merge with the code
that followed the macro, and fix bugs related to the new dv-sockser in
the process.
Hopefully building the various sims with the default sim-hardware
settings, as well as with explicit --{dis,en}able-sim-hardware flags,
should all just work now.
Markus Metzger [Tue, 26 Mar 2013 07:15:09 +0000 (07:15 +0000)]
record-btrace: fix assertion when enabling recording after re-run
Reading symbols from /bin/true...(no debugging symbols found)...done.
(gdb) b _start
Function "_start" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (_start) pending.
(gdb) r
Starting program: /bin/true
Breakpoint 1, 0x00000039a0400af0 in _start () from /lib64/ld-linux-x86-64.so.2
(gdb) rec b
(gdb) r
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Starting program: /bin/true
Breakpoint 1, 0x00000039a0400af0 in _start () from /lib64/ld-linux-x86-64.so.2
(gdb) rec b
gdb/record-btrace.c:154: internal-error: record_btrace_open:
Assertion `record_btrace_thread_observer == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
Tom Tromey [Mon, 25 Mar 2013 17:28:03 +0000 (17:28 +0000)]
PR symtab/11462:
* c-exp.y (exp): Add new productions for destructors after '.' and
'->'.
(write_destructor_name): New function.
gdb/testsuite
* gdb.cp/m-static.exp: Add destructor-printing tests.
Alan Modra [Mon, 25 Mar 2013 06:12:06 +0000 (06:12 +0000)]
* elflink.c (_bfd_elf_merge_symbol): Set old_alignment for
usual common symbols as well as for dynamic. Add poldbfd param.
Save old bfd. Adjust callers.
(_bfd_elf_add_default_symbol): Add poldbfd param. Pass "section"
and "value" by value, not pointer. Adjust caller.
(elf_link_add_object_symbols): Combine undef_bfd and old_bfd vars.
Delete code to set same. Use old_bfd and old_alignment from
_bfd_elf_merge_symbol instead. Add default symbol before
alignment and size checks. Wrap overlong lines.
Alan Modra [Mon, 25 Mar 2013 06:02:28 +0000 (06:02 +0000)]
* elflink.c (_bfd_elf_merge_symbol): Don't discard TLS symbols here.
Wrap long lines.
(elf_link_add_object_symbols): Discard TLS symbols for --just-syms
early in symbol loop.
Alan Modra [Mon, 25 Mar 2013 06:00:06 +0000 (06:00 +0000)]
* elf-bfd.h (struct elf_backend_data <merge_symbol>): Update proto.
(_bfd_elf_init_reloc_shdr): Delete.
* elf.c (_bfd_elf_init_reloc_shdr): Make static.
* elf64-x86-64.c (elf_x86_64_merge_symbol): Trim parameters to
just what is needed.
* elflink.c (_bfd_elf_merge_symbol): Update bed->merge_symbol call.
Joel Sherrill [Sat, 23 Mar 2013 15:06:59 +0000 (15:06 +0000)]
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
Error when --disable-sim-hardware is specified.
* tconfig.in: Conditionalize use of dv_sockser_install.
* configure: Regenerated.
* config.in: Regenerated.
Joel Sherrill [Sat, 23 Mar 2013 15:05:07 +0000 (15:05 +0000)]
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Address use of dv-sockser.o.
* tconfig.in: Conditionalize use of dv_sockser_install.
* configure: Regenerated.
* config.in: Regenerated.
Joel Sherrill [Sat, 23 Mar 2013 15:03:01 +0000 (15:03 +0000)]
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* acinclude.m4: Add SIM_DV_SOCKSER_O which is empty on hosts
which do not support dv-sockser.o. Add always as option to
first argument to SIM_AC_OPTION_HARDWARE. Fail if hardware
is always required to be enabled by simulator.
Eli Zaretskii [Sat, 23 Mar 2013 10:48:23 +0000 (10:48 +0000)]
Fix relocation of directories in the MinGW build.
windows-nat.c (windows_get_absolute_argv0): New function.
windows-nat.h: Add its prototype.
main.c (get_init_files): Use filename_ncmp instead of strncmp.
Use IS_DIR_SEPARATOR instead of looking for a character inside
SLASH_STRING. Include filenames.h.
(captured_main) [__MINGW32__]: Make argv[0] absolute, so that
relocate_gdb_directory works when passed gdb_program_name.
Include windows-nat.h.
Alan Modra [Fri, 22 Mar 2013 23:35:55 +0000 (23:35 +0000)]
PR ld/15270
* elflink.c (elf_link_add_object_symbols): Don't set def_regular
or ref_regular for BFD_PLUGIN owned syms, or have them affect
def_dynamic/ref_dynamic.
(_bfd_elf_fix_symbol_flags): Don't set def_regular for BFD_PLUGIN
owned syms.
Jan Kratochvil [Fri, 22 Mar 2013 20:39:29 +0000 (20:39 +0000)]
gdb/
* exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
* remote.c (trace_error): Remove the special handling of '2'.
(readchar) <SERIAL_EOF>
(readchar) <SERIAL_ERROR>
(getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
(remote_get_trace_status): Call throw_exception if EX is
TARGET_CLOSE_ERROR.
* utils.c (perror_with_name): Rename to ...
(throw_perror_with_name): ... here. New parameter errcode, describe it
in the function comment.
(perror_with_name): New function wrapper.
* utils.h (enum errors): New stub declaration.
(throw_perror_with_name): New declaration.
gdb/testsuite/
* gdb.server/server-kill.c: New file.
* gdb.server/server-kill.exp: New file.
Changes things to allow setting the command to INT_MAX or UINT_MAX
directly, with signed and unsigned commands respectively. However,
that went a little bit too far, as in the cases of var_integer and
var_uinteger, those values are actually implementation detail. It's
better to not expose them in the interface, and have users assume
those values mean "unlimited" too, so to be safer to expand the range
of the commands in the future if we want to. Yes, it's pedantic, and
it's not likely users actually will do this, but MI frontends and
Python scripts might.
gdb/
2013-03-22 Pedro Alves <palves@redhat.com>
Yao Qi <yao@codesourcery.com>
Mark Kettenis <kettenis@gnu.org>
* cli/cli-setshow.c (do_set_command) <var_uinteger>:
Don't let the user set the value to UINT_MAX directly.
<var_integer>: Don't let the user set the value to INT_MAX
directly.
Changes things to allow setting the command to INT_MAX or UINT_MAX
directly, with signed and unsigned commands respectively. However,
that went a little bit too far, as in the cases of var_integer and
var_uinteger, those values are actually implementation detail. It's
better to not expose them in the interface, and have users assume
those values mean "unlimited" too, so to be safer to expand the range
of the commands in the future if we want to. Yes, it's pedantic, and
it's not likely users actually will do this, but MI frontends and
Python scripts might.
gdb/
2013-03-22 Pedro Alves <palves@redhat.com>
Yao Qi <yao@codesourcery.com>
Mark Kettenis <kettenis@gnu.org>
* cli/cli-setshow.c (do_set_command) <var_uinteger>:
Don't let the user set the value to UINT_MAX directly.
<var_integer>: Don't let the user set the value to INT_MAX
directly.
Pedro Alves [Fri, 22 Mar 2013 14:52:26 +0000 (14:52 +0000)]
Linux: No need to set ptrace event options in fork/clone children.
Oleg Nesterov told me that the Linux kernel copies the parent's ptrace
options to fork/clone children, so there's no need for GDB to do that
manually.
I was actually a bit surprised, since I thought the ptracer had to
always set the ptrace options itself, and GDB is indeed calling
PTRACE_SETOPTIONS for each new fork child, if it'll stay attached.
Looking at the history of that code, I found that is was actually I
who added that set-ptrace-options-in-children bit, back in
http://sourceware.org/ml/gdb-patches/2009-05/msg00656.html. But,
honestly, I don't recall why I needed that. I think I may have just
blindly believed it was necessary.
I then looked back at the history of all the PTRACE_SETOPTIONS code we
have, and found that gdb never did copy the ptrace options before my
patch. But, when gdbserver learnt to use PTRACE_EVENT_CLONE, at
http://sourceware.org/ml/gdb-patches/2007-10/msg00547.html, it was
made to do 'ptrace (PTRACE_SETOPTIONS, new_pid, 0,
PTRACE_O_TRACECLONE)' for all new clones. Hmmm. But, GDB itself
never did that, so it can't really ever have been necessary, I
believe, otherwise GDB should have been doing it too.
(GDBserver doesn't support following forks, and so naturally doesn't
do any PTRACE_SETOPTIONS on fork children.)
So this patch removes the -I believe- unnecessary ptrace syscalls.
Tested on x86_64 Fedora 17, native/gdbserver, and on x86_64 RHEL5
native/gdbserver (Linux 2.6.18, I think a ptrace-on-utrace kernel).
No regressions.
Pedro Alves [Fri, 22 Mar 2013 14:43:28 +0000 (14:43 +0000)]
hppa-hpux-tdep.c: Fix host dependency.
$ make WERROR_CFLAGS="-Wpointer-sign -Werror" hppa-hpux-tdep.o -k 2>&1 1>/dev/null
../../src/gdb/hppa-hpux-tdep.c: In function ‘hppa_hpux_push_dummy_code’:
../../src/gdb/hppa-hpux-tdep.c:1225:7: error: pointer targets in passing argument 2 of ‘write_memory’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/hppa-hpux-tdep.c:22:0:
../../src/gdb/gdbcore.h:85:13: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
../../src/gdb/hppa-hpux-tdep.c:1251:7: error: pointer targets in passing argument 2 of ‘write_memory’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/hppa-hpux-tdep.c:22:0:
../../src/gdb/gdbcore.h:85:13: note: expected ‘const gdb_byte *’ but argument is of type ‘char *’
../../src/gdb/hppa-hpux-tdep.c: In function ‘hppa_hpux_supply_save_state’:
../../src/gdb/hppa-hpux-tdep.c:1354:9: error: pointer targets in passing argument 1 of ‘extract_unsigned_integer’ differ in signedness [-Werror=pointer-sign]
In file included from ../../src/gdb/hppa-hpux-tdep.c:20:0:
../../src/gdb/defs.h:675:22: note: expected ‘const gdb_byte *’ but argument is of type ‘const char *’
Casting to gdb_byte would fix it, however, writing an
unsigned int array like this
directly to target memory assumes the host endianness is the same as
the target's. hppa is big endian, so I believe this patch should be
correct -- it defines the array as a gdb_byte array. It uses a macro
to make the insn bytes a little more readable. I thought of using
write_memory_unsigned_integer once for each element of the unsigned
int array, but this way keeps issuing a single target memory write /
roundtrip for the whole trampoline.
gdb/
2013-03-22 Pedro Alves <palves@redhat.com>
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Define INSN macro,
use it to rewrite the trampoline buffers with type gdb_byte[], and
undefine the macro. Remove char* cast.
Pedro Alves [Thu, 21 Mar 2013 19:18:25 +0000 (19:18 +0000)]
Fix gdb.trace/trace-buffer-size.exp race.
Just the usual missing $gdb_prompt match:
(gdb) tstatus
No trace has been run on the target.
Collected 0 trace frames.
Trace buffer has 5242880 bytes of 5242880 bytes free (0% full).
Trace will stop if GDB disconnects.
Not looking at any trace frame.
PASS: gdb.trace/trace-buffer-size.exp: get default buffer size
(gdb) set trace-buffer-size 4
(gdb) FAIL: gdb.trace/trace-buffer-size.exp: set trace buffer size 1
This fixes it.
gdb/testsuite/
2013-03-21 Pedro Alves <palves@redhat.com>
* gdb.trace/trace-buffer-size.exp (get default buffer size):
Expect $gdb_prompt in gdb_test_multiple.
Doug Evans [Thu, 21 Mar 2013 17:37:30 +0000 (17:37 +0000)]
New commands "mt set per-command {space,time,symtab} {on,off}".
* NEWS: Add entry.
* event-top.c: #include "maint.h".
* main.c: #include "maint.h".
* maint.c: #include <sys/time.h>, <time.h>, block.h, top.h,
timeval-utils.h, maint.h, cli/cli-setshow.h.
(per_command_time, per_command_space): New static globals.
(per_command_symtab): New static global.
(per_command_setlist, per_command_showlist): New static globals.
(struct cmd_stats): Move here from utils.c.
(set_per_command_time): Renamed from set_display_time in utils.c
and moved here. All callers updated.
(set_per_command_space): Renamed from set_display_space in utils.c
and moved here. All callers updated.
(count_symtabs_and_blocks): New function.
(report_command_stats): Moved here from utils.c. Add support for
printing symtab stats. Only print data if enabled before command
executed.
(make_command_stats_cleanup): Ditto.
(sert_per_command_cmd, show_per_command_cmd): New functions.
(_initialize_maint_cmds): Add new commands
mt set per-command {space,time,symtab} {on,off}.
* maint.h: New file.
* top.c: #include "maint.h".
* utils.c (reset_prompt_for_continue_wait_time): New function.
(get_prompt_for_continue_wait_time): New function.
* utils.h (reset_prompt_for_continue_wait_time): Declare
(get_prompt_for_continue_wait_time): Declare.
(make_command_stats_cleanup): Moved to maint.h.
(set_display_time, set_display_space): Moved to maint.h and renamed
to set_per_command_time, set_per_command_space.
* cli/cli-setshow.c (parse_cli_boolean_value): Renamed from
parse_binary_operation and made non-static. Don't call error,
just return an error marker. All callers updated.
* cli/cli-setshow.h (parse_cli_boolean_value): Declare.
doc/
* gdb.texinfo (Maintenance Commands): Add docs for
"mt set per-command {space,time,symtab} {on,off}".
testsuite/
* gdb.base/maint.exp: Update tests for per-command stats.
Nick Clifton [Thu, 21 Mar 2013 16:08:07 +0000 (16:08 +0000)]
* elf32-h8300 (h8_relax_section): Add new relaxation of mov
@(disp:32,ERx) to mov @(disp:16,ERx).
(R_H8_DISP32A16): New reloc.
Comments added and corrected.
* reloc.c (BFD_RELOC_H8_DISP32A16): New reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* ld.texinfo (H8/300): Add description of relaxation of
mov @(disp:32,ERx) to mov @(disp:16,ERx).
* ld-h8300/h8300.exp: Add new relax-7 test on ELF.
* ld-h8300/relax-2.s: Add other direction and .w/.l variants of
mov insns.
* ld-h8300/relax-2.d: Update expected disassembly.
* ld-h8300/relax-7a.s: New: tests for mov @(disp:32,ERx) -> mov
@(disp:16,ERx).
* ld-h8300/relax-7b.s: New: Likewise.
* ld-h8300/relax-7.d: New: expected disassembly.
* config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
@(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
R_H8_DISP32A16.
* config/tc-h8300.h: Remove duplicated defines.
Tom Tromey [Thu, 21 Mar 2013 15:19:33 +0000 (15:19 +0000)]
PR exp/15109:
* c-exp.y (yylex): Rewrite to push all tokens onto the FIFO.
Handle FILENAME token.
gdb/testsuite
* gdb.cp/cpexprs.exp: Add test for FILENAME:: case.
* gdb.cp/misc.exp: Add test for FILENAME:: case.
Kai Tietz [Thu, 21 Mar 2013 14:07:08 +0000 (14:07 +0000)]
* coffgen.c (coff_real_object_p): Make global.
* peicode.h (coff_real_object_p): Add prototype.
(FILHDR): Defined for COFF_IMAGE_WITH_PE as
external_PEI_IMAGE_hdr structure.
(coff_swap_filehdr_in): Handle variable header-size.
* peXXigen.c (_bfd_XXi_swap_aouthdr_in): Just handle amount
of directory-entiries as specified in pe-header.
projects / thirdparty / binutils-gdb.git / log
