Call cifs_reconnect() to wake up processes waiting on negotiate
protocol to handle the case where server abruptly shut down and had no
chance to properly close the socket.
We use komeda_crtc_normalize_zpos to normalize zpos of affected planes
to their blending zorder in CU. If there's only one slave plane in
affected planes and its layer_split property is enabled, order++ for
its split layer, so that when calculating the normalized_zpos
of master planes, the split layer of the slave plane is included, but
the max_slave_zorder does not include the split layer and keep zero
because there's only one slave plane in affacted planes, although we
actually use two slave layers in this commit.
In most cases, this bug does not result in a commit failure, but assume
the following situation:
slave_layer 0: zpos = 0, layer split enabled, normalized_zpos =
0;(use slave_layer 2 as its split layer)
master_layer 0: zpos = 2, layer_split enabled, normalized_zpos =
2;(use master_layer 2 as its split layer)
master_layer 1: zpos = 4, normalized_zpos = 4;
master_layer 3: zpos = 5, normalized_zpos = 5;
kcrtc_st->max_slave_zorder = 0;
When we use master_layer 3 as a input of CU in function
komeda_compiz_set_input and check it with function
komeda_component_check_input, the parameter idx is equal to
normailzed_zpos minus max_slave_zorder, the value of idx is 5
and is euqal to CU's max_active_inputs, so that
komeda_component_check_input returns a -EINVAL value.
To fix the bug described above, when calculating the max_slave_zorder
with the layer_split enabled, count the split layer in this calculation
directly.
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://patch.msgid.link/20240823074305.16873-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When changing the interface from CAN-CC to CAN-FD mode the old
coalescing parameters are re-used. This might cause problem, as the
configured parameters are too big for CAN-FD mode.
During testing an invalid TX coalescing configuration has been seen.
The problem should be been fixed in the previous patch, but add a
safeguard here to ensure that the number of TEF coalescing buffers (if
configured) is exactly the half of all TEF buffers.
When the firmware crashes, we first told the op_mode and only then,
changed the transport's state. This is a problem if the op_mode's
nic_error() handler needs to send a host command: it'll see that the
transport's state still reflects that the firmware is alive.
Today, this has no consequences since we set the STATUS_FW_ERROR bit and
that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording
looks at this bit to know not to send a host command for example.
To fix the hibernation, we needed to reset the firmware without having
an error and checking STATUS_FW_ERROR to see whether the firmware is
alive will no longer hold, so this change is necessary as well.
Change the flow a bit.
Change trans->state before calling the op_mode's nic_error() method and
check trans->state instead of STATUS_FW_ERROR. This will keep the
current behavior of iwl_fw_dbg_stop_restart_recording upon firmware
error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording
safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not
alive.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid
[I missed this was a dependency for the hibernation fix, changed
the commit message a bit accordingly] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was
recently converted from just a message), that can be hit if we
wait for TX queues to become empty after firmware died. Clearly,
we can't expect anything from the firmware after it's declared dead.
Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could
be a good idea to stop the flow earlier, the flush functions do some
maintenance work that is not related to the firmware, so keep that part
of the code running even when the firmware is not running.
The calculation should consider also the 6GHz IE's len, fix that.
In addition, in iwl_mvm_sched_scan_start() the scan_fits helper is
called only in case non_psc_incldued is true, but it should be called
regardless, fix that as well.
An invalid buffer destination is not a problem for the driver and it
does not make sense to report it with the KERN_ERR message level. As
such, change the message to use IWL_DEBUG_FW.
Reported-by: Len Brown <lenb@kernel.org> Closes: https://lore.kernel.org/r/CAJvTdKkcxJss=DM2sxgv_MR5BeZ4_OC-3ad6tA40TYH2yqHCWw@mail.gmail.com Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.20abf78f05bc.Ifbcecc2ae9fb40b9698302507dcba8b922c8d856@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently we call irq_set_noprobe() in a loop for all IRQs, but indeed
it only works for IRQs below NR_IRQS_LEGACY because at init_IRQ() only
legacy interrupts have been allocated.
Instead, we can define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE in asm/hwirq.h
and the core will automatically set the flag for all interrupts.
The driver must ensure TX descriptor updates are visible
before updating TX pointer and TX clear pointer.
This resolves TX hangs observed on AST2600 when running
iperf3.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240825132415.8307-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before commit 721f4a6526da ("mm/memblock: remove empty dummy entry") the
check for non-zero of memblock.reserved.cnt in mmu_init() would always
be true either because memblock.reserved.cnt is initialized to 1 or
because there were memory reservations earlier.
The removal of dummy empty entry in memblock caused this check to fail
because now memblock.reserved.cnt is initialized to 0.
Remove the check for non-zero of memblock.reserved.cnt because it's
perfectly fine to have an empty memblock.reserved array that early in
boot.
pinctrl-at91 currently does not support the gpio-groups devicetree
property and has no pin-range.
Because of this at91 gpios stopped working since patch
commit 2ab73c6d8323fa1e ("gpio: Support GPIO controllers without pin-ranges")
This was discussed in the patches
commit fc328a7d1fcce263 ("gpio: Revert regression in sysfs-gpio (gpiolib.c)")
commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
As a workaround manually set pin-range via gpiochip_add_pin_range() until
a) pinctrl-at91 is reworked to support devicetree gpio-groups
b) another solution as mentioned in
commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"")
is found
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug
headphone or headset.
It had a chance to get no sound from headphone.
Replace depop procedure will solve this issue.
Add AFE Control Register 0 to the volatile_register.
AFE_DAC_CON0 can be modified by both the SOF and ALSA drivers.
If this register is read and written in cache mode, the cached value
might not reflect the actual value when the register is modified by
another driver. It can cause playback or capture failures. Therefore,
it is necessary to add AFE_DAC_CON0 to the list of volatile registers.
Signed-off-by: YR Yang <yr.yang@mediatek.com> Reviewed-by: Fei Shao <fshao@chromium.org> Reviewed-by: Trevor Wu <trevor.wu@mediatek.com> Link: https://patch.msgid.link/20240801084326.1472-1-yr.yang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.
Kasan bug report:
==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356
Intel Arrow Lake-H/U has the same GPIO hardware than Meteor Lake-P but
the ACPI ID is different. Add this new ACPI ID to the list of supported
devices.
Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the calculation of packet signatures by adding the offset into a page
in the read or write data payload when hashing the pages from it.
Fixes: 39bc58203f04 ("cifs: Add a function to Hash the contents of an iterator") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clang static checker (scan-build) warning:
sound/soc/codecs/peb2466.c:232:8:
Assigned value is garbage or undefined [core.uninitialized.Assign]
232 | *val = tmp;
| ^ ~~~
When peb2466_read_byte() fails, 'tmp' will have a garbage value.
Add a judgemnet to avoid this problem.
Fixes: 227f609c7c0e ("ASoC: codecs: Add support for the Infineon PEB2466 codec") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://patch.msgid.link/20240911115448.277828-1-suhui@nfschina.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It may be possible for the sum of the values derived from
i915_ggtt_offset() and __get_parent_scratch_offset()/
i915_ggtt_offset() to go over the u32 limit before being assigned
to wq offsets of u64 type.
Mitigate these issues by expanding one of the right operands
to u64 to avoid any overflow issues just in case.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
In spi_geni_remove(), the free_irq() sequence is different from that
on the probe error path. And the IRQ will still remain and it's interrupt
handler may use the dma channel after release dma channel and before free
irq, which is not secure, fix it.
Fixes: b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.
Fixes: cfdab2cd85ec ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
init() was removed from ramgp102 when reworking the memory detection, as
it was thought that the code was only necessary when the driver performs
mclk changes, which nouveau doesn't support on pascal.
However, it turns out that we still need to execute this on some GPUs to
restore settings after DEVINIT, so revert to the original behaviour.
Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps:
Don't track CMA dma-buf pages under RssFile") it was possible to obtain
a mapping larger than the buffer size via mremap and bypass the overflow
check in dma_buf_mmap_internal. When using such a mapping to attempt to
fault past the end of the buffer, the CMA heap fault handler also checks
the fault offset against the buffer size, but gets the boundary wrong by
1. Fix the boundary check so that we don't read off the end of the pages
array and insert an arbitrary page in the mapping.
Reported-by: Xingyu Jin <xingyuj@google.com> Fixes: a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation") Cc: stable@vger.kernel.org # Applicable >= 5.10. Needs adjustments only for 5.10. Signed-off-by: T.J. Mercier <tjmercier@google.com> Acked-by: John Stultz <jstultz@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240830192627.2546033-1-tjmercier@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A syncobj reference is taken in drm_syncobj_find, but not released if
eventfd_ctx_fdget or kzalloc fails. Put the reference in these error
paths.
Reported-by: Xingyu Jin <xingyuj@google.com> Fixes: c7a472297169 ("drm/syncobj: add IOCTL to register an eventfd") Signed-off-by: T.J. Mercier <tjmercier@google.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by. Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org # 6.6+ Link: https://patchwork.freedesktop.org/patch/msgid/20240909205400.3498337-1-tjmercier@google.com Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it
breaks codecs using non-continuous masks in source and sink ports. The
commit missed the point that port numbers are not used as indices for
iterating over prop.sink_ports or prop.source_ports.
Soundwire core and existing codecs expect that the array passed as
prop.sink_ports and prop.source_ports is continuous. The port mask still
might be non-continuous, but that's unrelated.
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/ Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps") Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000ffff000800002500dead0000000001220000000000000000
[ 37.186788] raw: 0000000000000000000000008080008000000001fdffffff0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==================================================================
[ 37.254394] Disabling lock debugging due to kernel taint
0+1 records in
0+1 records out
3 bytes copied, 0.335911 s, 0.0 kB/s
Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller") Cc: stable@kernel.org Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To fix some critical section races, the interface_lock was added to a few
locations. One of those locations was above where the interface_lock was
declared, so the declaration was moved up before that usage.
Unfortunately, where it was placed was inside a CONFIG_TIMERLAT_TRACER
ifdef block. As the interface_lock is used outside that config, this broke
the build when CONFIG_OSNOISE_TRACER was enabled but
CONFIG_TIMERLAT_TRACER was not.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Helena Anna" <helena.anna.dubel@intel.com> Cc: "Luis Claudio R. Goncalves" <lgoncalv@redhat.com> Cc: Tomas Glozar <tglozar@redhat.com> Link: https://lore.kernel.org/20240909103231.23a289e2@gandalf.local.home Fixes: e6a53481da29 ("tracing/timerlat: Only clear timer if a kthread exists") Reported-by: "Bityutskiy, Artem" <artem.bityutskiy@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending packets under 60 bytes, up to three bytes of the buffer
following the data may be leaked. Avoid this by extending all packets to
ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be
reproduced by running
$ ping -s 11 destination
Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TAS module could not be configured when it's running in pending
status. We need disable the module and configure it again. However, the
pending status is not cleared after the module disabled. TC taprio set
will always return busy even it's disabled.
For example, a user uses tc-taprio to configure Qbv and a future
basetime. The TAS module will run in a pending status. There is no way
to reconfigure Qbv, it always returns busy.
Actually the TAS module can be reconfigured when it's disabled. So it
doesn't need to check the pending status if the TAS module is disabled.
After the patch, user can delete the tc taprio configuration to disable
Qbv and reconfigure it again.
Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload") Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Link: https://patch.msgid.link/20240906093550.29985-1-xiaoliang.yang_1@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Padding is not included in UDP and TCP checksums. Therefore, reduce the
length of the checksummed data to include only the data in the IP
payload. This fixes spurious reported checksum failures like
rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe
pkt: bad csum
Technically it is possible for there to be trailing bytes after the UDP
data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) +
udp.len < ip.len). However, we don't generate such packets.
Fixes: 91a7de85600d ("selftests/net: add csum offload test") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the driver only enables RX interrupt to handle RX
packets and TX resources. Sometimes there is not RX traffic,
so the TX resource needs to wait for RX interrupt to free.
This situation will toggle the TX timeout watchdog when the MAC
TX ring has no more resources to transmit packets.
Therefore, enable TX interrupt to release TX resources at any time.
When I am verifying iperf3 over UDP, the network hangs.
Like the log below.
The network topology is FTGMAC connects directly to a PC.
UDP does not need to wait for ACK, unlike TCP.
Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead
of waiting for the RX interrupt.
The current implementation of SMQ flush sequence waits for the packets
in the TM pipeline to be transmitted out of the link. This sequence
doesn't succeed in HW when there is any issue with link such as lack of
link credits, link down or any other traffic that is fully occupying the
link bandwidth (QoS). This patch modifies the SMQ flush sequence to
drop the packets after TL1 level (SQM) instead of polling for the packets
to be sent out of RPM/CGX link.
The bridge mode is only relevant when there are multiple functions per
port. Therefore, prevent setting and getting this setting when there are no
VFs.
Note that after this change, there are no settings to change on the PF
interface using `bridge link` when there are no VFs, so the interface no
longer appears in the `bridge link` output.
Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before creating a scheduling element in a NIC or E-Switch scheduler,
ensure that the requested element type is supported. If the element is
of type Transmit Scheduling Arbiter (TSAR), also verify that the
specific TSAR type is supported.
Always call igb_xdp_ring_update_tail() under __netif_tx_lock, add a comment
and lockdep assert to indicate that. This is needed to share the same TX
ring between XDP, XSK and slow paths. Furthermore, the current XDP
implementation is racy on tail updates.
Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add lockdep assert and fixes tag] Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The description of function ice_find_vsi_list_entry says:
Search VSI list map with VSI count 1
However, since the blamed commit (see Fixes below), the function no
longer checks vsi_count. This causes a problem in ice_add_vlan_internal,
where the decision to share VSI lists between filter rules relies on the
vsi_count of the found existing VSI list being 1.
The reproducing steps:
1. Have a PF and two VFs.
There will be a filter rule for VLAN 0, referring to a VSI list
containing VSIs: 0 (PF), 2 (VF#0), 3 (VF#1).
2. Add VLAN 1234 to VF#0.
ice will make the wrong decision to share the VSI list with the new
rule. The wrong behavior may not be immediately apparent, but it can
be observed with debug prints.
3. Add VLAN 1234 to VF#1.
ice will unshare the VSI list for the VLAN 1234 rule. Due to the
earlier bad decision, the newly created VSI list will contain
VSIs 0 (PF) and 3 (VF#1), instead of expected 2 (VF#0) and 3 (VF#1).
4. Try pinging a network peer over the VLAN interface on VF#0.
This fails.
Reproducer script at:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/test-vlan-vsi-list-confusion.sh
Commented debug trace:
https://gitlab.com/mschmidt2/repro/-/blob/master/RHEL-46814/ice-vlan-vsi-lists-debug.txt
Patch adding the debug prints:
https://gitlab.com/mschmidt2/linux/-/commit/f8a8814623944a45091a77c6094c40bfe726bfdb
(Unsafe, by the way. Lacks rule_lock when dumping in ice_remove_vlan.)
Michal Swiatkowski added to the explanation that the bug is caused by
reusing a VSI list created for VLAN 0. All created VFs' VSIs are added
to VLAN 0 filter. When a non-zero VLAN is created on a VF which is already
in VLAN 0 (normal case), the VSI list from VLAN 0 is reused.
It leads to a problem because all VFs (VSIs to be specific) that are
subscribed to VLAN 0 will now receive a new VLAN tag traffic. This is
one bug, another is the bug described above. Removing filters from
one VF will remove VLAN filter from the previous VF. It happens a VF is
reset. Example:
- creation of 3 VFs
- we have VSI list (used for VLAN 0) [0 (pf), 2 (vf1), 3 (vf2), 4 (vf3)]
- we are adding VLAN 100 on VF1, we are reusing the previous list
because 2 is there
- VLAN traffic works fine, but VLAN 100 tagged traffic can be received
on all VSIs from the list (for example broadcast or unicast)
- trust is turning on VF2, VF2 is resetting, all filters from VF2 are
removed; the VLAN 100 filter is also removed because 3 is on the list
- VLAN traffic to VF1 isn't working anymore, there is a need to recreate
VLAN interface to readd VLAN filter
One thing I'm not certain about is the implications for the LAG feature,
which is another caller of ice_find_vsi_list_entry. I don't have a
LAG-capable card at hand to test.
Fixes: 23ccae5ce15f ("ice: changes to the interface with the HW and FW for SRIOV_VF+LAG") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Dave Ertman <David.m.ertman@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When adding a switch filter (such as a MAC or VLAN filter), it is expected
that the driver will detect the case where the filter already exists, and
return -EEXIST. This is used by calling code such as ice_vc_add_mac_addr,
and ice_vsi_add_vlan to avoid incrementing the accounting fields such as
vsi->num_vlan or vf->num_mac.
This logic works correctly for the case where only a single VSI has added a
given switch filter.
When a second VSI adds the same switch filter, the driver converts the
existing filter from an ICE_FWD_TO_VSI filter into an ICE_FWD_TO_VSI_LIST
filter. This saves switch resources, by ensuring that multiple VSIs can
re-use the same filter.
The ice_add_update_vsi_list() function is responsible for doing this
conversion. When first converting a filter from the FWD_TO_VSI into
FWD_TO_VSI_LIST, it checks if the VSI being added is the same as the
existing rule's VSI. In such a case it returns -EEXIST.
However, when the switch rule has already been converted to a
FWD_TO_VSI_LIST, the logic is different. Adding a new VSI in this case just
requires extending the VSI list entry. The logic for checking if the rule
already exists in this case returns 0 instead of -EEXIST.
This breaks the accounting logic mentioned above, so the counters for how
many MAC and VLAN filters exist for a given VF or VSI no longer accurately
reflect the actual count. This breaks other code which relies on these
counts.
In typical usage this primarily affects such filters generally shared by
multiple VSIs such as VLAN 0, or broadcast and multicast MAC addresses.
Fix this by correctly reporting -EEXIST in the case of adding the same VSI
to a switch rule already converted to ICE_FWD_TO_VSI_LIST.
Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After vsi setup refactor commit 6624e780a577 ("ice: split ice_vsi_setup
into smaller functions") ice_cfg_sw_lldp function which removes rx rule
directing LLDP packets to vsi is moved from ice_vsi_release to
ice_vsi_decfg function. ice_vsi_decfg is used in more cases than just in
vsi_release resulting in unnecessary removal of rx lldp packets handling
switch rule. This leads to lldp packets being dropped after a change number
of channels via ethtool.
This patch moves ice_cfg_sw_lldp function that removes rx lldp sw rule back
to ice_vsi_release function.
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Matěj Grégr <mgregr@netx.as> Closes: https://lore.kernel.org/intel-wired-lan/1be45a76-90af-4813-824f-8398b69745a9@netx.as/T/#u Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation of pmbus_show_boolean assumes that all devices
support write-back operation of status register to clear pending warnings
or faults. Since clearing individual bits in the status registers was only
introduced in PMBus specification 1.2, this operation may not be supported
by some older devices. This can result in an error while reading boolean
attributes such as temp1_max_alarm.
Fetch PMBus revision supported by the device and modify pmbus_show_boolean
so that it only tries to clear individual status bits if the device is
compliant with PMBus specs >= 1.2. Otherwise clear all fault indicators
on the current page after a fault status was reported.
Fixes: 35f165f08950a ("hwmon: (pmbus) Clear pmbus fault/warning bits after read") Signed-off-by: Patryk Biel <pbiel7@gmail.com>
Message-ID: <20240909-pmbus-status-reg-clearing-v1-1-f1c0d68c6408@gmail.com>
[groeck:
Rewrote description
Moved revision detection code ahead of clear faults command
Assigned revision if return value from PMBUS_REVISION command is 0
Improved return value check from calling _pmbus_write_byte_data()] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Function ignores the AF_UNIX socket type argument, SOCK_DGRAM is hardcoded.
Fix to respect the argument provided.
Fixes: 75e0e27db6cf ("selftest/bpf: Change udp to inet in some function names") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20240713200218.2140950-3-mhal@rbox.co Signed-off-by: Sasha Levin <sashal@kernel.org>
When user send a mbox command whose opcode is CXL_MBOX_OP_CLEAR_LOG and
the in_payload is normal vendor debug log UUID according to
the CXL specification cxl_payload_from_user_allowed() will return
false unexpectedly, Sending mbox cmd operation fails and the kernel
log will print:
Clear Log: input payload not allowed.
All CXL devices that support a debug log shall support the Vendor Debug
Log to allow the log to be accessed through a common host driver, for any
device, all versions of the CXL specification define the same value with
Log Identifier of: 5e1819d9-11a9-400c-811f-d60719403d86
Refer to CXL spec r3.1 Table 8-71
Fix the definition value of DEFINE_CXL_VENDOR_DEBUG_UUID to match the
CXL specification.
[Why/How]
We can miss writing FEC_READY in some cases before LT start, which
violates DP spec. Remove the condition guarding the DPCD write so that
the write happens unconditionally.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
axienet_dma_err_handler can race with axienet_stop in the following
manner:
CPU 1 CPU 2
====================== ==================
axienet_stop()
napi_disable()
axienet_dma_stop()
axienet_dma_err_handler()
napi_disable()
axienet_dma_stop()
axienet_dma_start()
napi_enable()
cancel_work_sync()
free_irq()
Fix this by setting a flag in axienet_stop telling
axienet_dma_err_handler not to bother doing anything. I chose not to use
disable_work_sync to allow for easier backporting.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjusted to apply before dmaengine support ] Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Jann points out, PFN mappings are special, because unlike normal
memory mappings, there is no lifetime information associated with the
mapping - it is just a raw mapping of PFNs with no reference counting of
a 'struct page'.
That's all very much intentional, but it does mean that it's easy to
mess up the cleanup in case of errors. Yes, a failed mmap() will always
eventually clean up any partial mappings, but without any explicit
lifetime in the page table mapping itself, it's very easy to do the
error handling in the wrong order.
In particular, it's easy to mistakenly free the physical backing store
before the page tables are actually cleaned up and (temporarily) have
stale dangling PTE entries.
To make this situation less error-prone, just make sure that any partial
pfn mapping is torn down early, before any other error handling.
commit 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when
CPUs go online/offline") introduces a new cpuhp state for hyperv
initialization.
cpuhp_setup_state() returns the state number if state is
CPUHP_AP_ONLINE_DYN or CPUHP_BP_PREPARE_DYN and 0 for all other states.
For the hyperv case, since a new cpuhp state was introduced it would
return 0. However, in hv_machine_shutdown(), the cpuhp_remove_state() call
is conditioned upon "hyperv_init_cpuhp > 0". This will never be true and
so hv_cpu_die() won't be called on all CPUs. This means the VP assist page
won't be reset. When the kexec kernel tries to setup the VP assist page
again, the hypervisor corrupts the memory region of the old VP assist page
causing a panic in case the kexec kernel is using that memory elsewhere.
This was originally fixed in commit dfe94d4086e4 ("x86/hyperv: Fix kexec
panic/hang issues").
Get rid of hyperv_init_cpuhp entirely since we are no longer using a
dynamic cpuhp state and use CPUHP_AP_HYPERV_ONLINE directly with
cpuhp_remove_state().
Cc: stable@vger.kernel.org Fixes: 9636be85cc5b ("x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline") Signed-off-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/20240828112158.3538342-1-anirudh@anirudhrb.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240828112158.3538342-1-anirudh@anirudhrb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a race condition when accessing the variable
ic->sb->recalc_sector. The function integrity_recalc writes to this
variable when it makes some progress and the function
dm_integrity_map_continue may read this variable concurrently.
One problem is that on 32-bit architectures the 64-bit variable is not
read and written atomically - it may be possible to read garbage if read
races with write.
Another problem is that memory accesses to this variable are not guarded
with memory barriers.
This commit fixes the race - it moves reading ic->sb->recalc_sector to an
earlier place where we hold &ic->endio_wait.lock.
The referenced commit drops bad input, but has false positives.
Tighten the check to avoid these.
The check detects illegal checksum offload requests, which produce
csum_start/csum_off beyond end of packet after segmentation.
But it is based on two incorrect assumptions:
1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO.
True in callers that inject into the tx path, such as tap.
But false in callers that inject into rx, like virtio-net.
Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or
CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal.
2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL.
False, as tcp[46]_gso_segment will fix up csum_start and offset for
all other ip_summed by calling __tcp_v4_send_check.
Because of 2, we can limit the scope of the fix to virtio_net_hdr
that do try to set these fields, with a bogus value.
Avoid unnecessary nested min()/max() which results in egregious macro
expansion.
Use clamp_t() as this introduces the least possible expansion, and turn
the {s,u}DIGIT_FITTING() macros into inline functions to avoid the
nested expansion.
This resolves an issue with slackware 15.0 32-bit compilation as
reported by Richard Narron.
Presumably the min/max fixups would be difficult to backport, this patch
should be easier and fix's Richard's problem in 5.15.
Reported-by: Richard Narron <richard@aaazen.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/all/4a5321bd-b1f-1832-f0c-cea8694dc5aa@aaazen.com/ Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module eMMC
and SPI flash powered-down initially (in fact it keeps the reset signal
asserted). BIOS_DISABLE_OVERRIDE pin allows to override that signal so
that eMMC and SPI can be used regardless of the state of the signal.
Let's make this GPIO a hog so that it's reserved and locked in the
proper state.
At the same time, make sure the pin is reserved for the hog and cannot
be requested by another node.
In commit 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch
on rk3399"), an additional pinctrl state was added whose default pinmux
is for 8ch i2s0. However, Puma only has 2ch i2s0. It's been overriding
the pinctrl-0 property but the second property override was missed in
the aforementioned commit.
On Puma, a hardware slider called "BIOS Disable/Normal Boot" can disable
eMMC and SPI to force booting from SD card. Another software-controlled
GPIO is then configured to override this behavior to make eMMC and SPI
available without human intervention. This is currently done in U-Boot
and it was enough until the aforementioned commit.
Indeed, because of this additional not-yet-overridden property, this
software-controlled GPIO is now muxed in a state that does not override
this hardware slider anymore, rendering SPI and eMMC flashes unusable.
Let's override the property with the 2ch pinmux to fix this.
Fixes: 91419ae0420f ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399") Cc: stable@vger.kernel.org Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Link: https://lore.kernel.org/r/20240731-puma-emmc-6-v1-1-4e28eadf32d0@cherry.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new endpoint using the IP of the initial subflow has been recently
added to increase the code coverage. But it breaks the test when using
old kernels not having commit 86e39e04482b ("mptcp: keep track of local
endpoint still available for each msk"), e.g. on v5.15.
Similar to commit d4c81bbb8600 ("selftests: mptcp: join: support local
endpoint being tracked or not"), it is possible to add the new endpoint
conditionally, by checking if "mptcp_pm_subflow_check_next" is present
in kallsyms: this is not directly linked to the commit introducing this
symbol but for the parent one which is linked anyway. So we can know in
advance what will be the expected behaviour, and add the new endpoint
only when it makes sense to do so.
In remove_anno_list_by_saddr(running on CPU2), after leaving the critical
zone protected by "pm.lock", the entry will be released, which leads to the
occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1).
Keeping a reference to add_timer inside the lock, and calling
sk_stop_timer_sync() with this reference, instead of "entry->add_timer".
Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock,
do not directly access any members of the entry outside the pm lock, which
can avoid similar "entry->x" uaf.
Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f3a31fb909db9b2a5c4d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f3a31fb909db9b2a5c4d Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Edward Adam Davis <eadavis@qq.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/tencent_7142963A37944B4A74EF76CD66EA3C253609@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.
Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.
Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.
For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these.
Fixes: e424fb8cc4e6 ("panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240909113227.254470-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-ENODEV is used to signify that there is no zap shader for the platform,
and the CPU can directly take the GPU out of secure mode. We want to
use this return code when there is no zap-shader node. But not when
there is, but without a firmware-name property. This case we want to
treat as-if the needed fw is not found.
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/604564/ Signed-off-by: Sasha Levin <sashal@kernel.org>
Add SAM client device nodes for the Surface Laptop Go 3. It seems to use
the same SAM client devices as the Surface Laptop Go 1 and 2, so re-use
their node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20240811131948.261806-3-luzmaximilian@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When merging files without trailing newlines at the end of the file, two
config fragments end up at the same row if file1.config doens't have a
trailing newline at the end of the file.
GT7868Q has incorrect data in the report and needs a fixup.
The change enables haptic touchpad on Lenovo ThinkBook 13x Gen 4
and has been tested on the device.
Unlink changes the link count on the target inode. POSIX mandates that
the ctime must also change when this occurs.
According to https://pubs.opengroup.org/onlinepubs/9699919799/functions/unlink.html:
"Upon successful completion, unlink() shall mark for update the last data
modification and last file status change timestamps of the parent
directory. Also, if the file's link count is not 0, the last file status
change timestamp of the file shall be marked for update."
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com>
[ add link to the opengroup docs ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
