Matthew Green [Wed, 18 Apr 2001 16:39:37 +0000 (16:39 +0000)]
* XScale coprocessor support.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
Michael Snyder [Tue, 17 Apr 2001 23:21:48 +0000 (23:21 +0000)]
2001-04-17 Michael Snyder <msnyder@redhat.com>
* solib.c (no_shared_libraries): New function. Discard all symbols
from shared libraries.
(_initialize_solib): Add command "nosharedlibrary" as complement
to the command "sharedlibrary". Unloads symbols for all solibs.
Mark Kettenis [Tue, 17 Apr 2001 23:20:55 +0000 (23:20 +0000)]
* i386-tdep.c (i386_saved_pc_after_call): New function.
* config/i386/tm-i386.h (SAVED_PC_AFTER_CALL): Redefine in terms
of i386_saved_pc_after_call.
(i386_saved_pc_after_call): New prototype.
Michael Snyder [Tue, 17 Apr 2001 20:31:00 +0000 (20:31 +0000)]
2001-04-17 Michael Snyder <msnyder@redhat.com>
* remote.c (remote_open_1): On opening the remote target, activate
the solib_create_inferior_hook, so that it can detect when the
target loads shared libraries.
(remote_async_open_1): Ditto.
* elf32-cris.c: Tweak comments related to dynamic linking.
(cris_elf_relocate_section): When not creating shared object, fill
in the .got table for any symbol not in the dynamic symbol table.
(elf_cris_finish_dynamic_symbol): When not creating shared object,
only emit a .got.rela reloc if the symbol is in the dynamic symbol
table.
(cris_elf_check_relocs): Use variable r_type in all places rather
than the original expression. Add default case in switch for
reloc types.
(elf_cris_size_dynamic_sections): Iterate over
elf_cris_discard_excess_program_dynamics when not creating shared
library.
(elf_cris_discard_excess_dso_dynamics): Renamed from
elf_cris_discard_copies. Correct typo, s/Rel/Rela/.
(elf_cris_discard_excess_program_dynamics): New.
Kevin Buettner [Tue, 17 Apr 2001 02:29:23 +0000 (02:29 +0000)]
* solib-aix5.c (map_index_vs_section_name_okay): New function.
(aix5_relocate_main_executable): Don't use file offsets for
determining corresponding sections and map file entries. Call
map_index_vs_section_name_okay() to do this instead.
David O'Brien [Tue, 17 Apr 2001 01:36:23 +0000 (01:36 +0000)]
2001-04-16 David O'Brien <obrien@FreeBSD.org>
* configure.in: Add the em type for FreeBSD targets.
* configure: Regenerate.
Approved by: Alan Modra <amodra@one.net.au>
<20010414192409.C16364@squeak.one.net.au>
Philip Blundell <philb@gnu.org>
<E14o06W-0002IT-00@kings-cross.london.uk.eu.org>
Mark Kettenis [Mon, 16 Apr 2001 13:03:15 +0000 (13:03 +0000)]
* i386-tdep.c (i386_frame_chain): New function.
* config/i386/tm-i386.h (FRAME_CHAIN): Redefine in terms of
i386_frame_chain.
(i386_frame_chain): New prototype.
* corefile.c (core_file_command) [HPUXHPPA]: Removed code that
sets symbol file from information obtained from the core file.
* corelow.c (core_file_to_sym_file): Removed.
Fernando Nasser [Fri, 13 Apr 2001 13:51:54 +0000 (13:51 +0000)]
2001-04-13 Fernando Nasser <fnasser@redhat.com>
From Adam Mirowski <Adam.Mirowski@Sun.COM>
Fixed Insight on Solaris. It was not possible to debug a process
because of EINTR "errors".
* procfs.c: (procfs_wait): if proc_wait_for_stop() fails
with EINTR, retry the call.
* ldmisc.c (vfinfo): Set flag to inhibit making executable if
warnings have been turned into errors.
* lexsup.c (OPTION_WARN_FATAL): Define.
(ld_options): Entry for --fatal-warnings.
(parse_args): Handle OPTION_WARN_FATAL.
* ld.h (ld_config_type): Add fatal_warnings field.
Jim Blandy [Thu, 12 Apr 2001 14:53:20 +0000 (14:53 +0000)]
* mips.igen (CFC1, CTC1): Pass the correct register numbers to
PENDING_FILL. Use PENDING_SCHED directly to handle the pending
set of the FCSR.
* sim-main.h (COCIDX): Remove definition; this isn't supported by
PENDING_FILL, and you can get the intended effect gracefully by
calling PENDING_SCHED directly.
H.J. Lu [Sun, 8 Apr 2001 05:13:57 +0000 (05:13 +0000)]
2001-04-05 Steven J. Hill <sjhill@cotw.com>
* Makefile.am (ALL_EMULATIONS): Add eelf32ltsmip.o.
(ALL_64_EMULATIONS): Add eelf64btsmip.o and eelf64ltsmip.o.
(eelf32ltsmip.c): New target.
(eelf64btsmip.c): Likewise.
(eelf64ltsmip.c): Likewise.
* Makefile.in: Regenerated.
* configure.tgt (mips*el-*-linux-gnu): Uses traditional MIPS
target.
(mips*-*-linux-gnu*): Likewise.
* emulparams/elf32ltsmip.sh: New. Traditional little endian
MIPS taget.
* emulparams/elf64btsmip.sh: New. Traditional 64bit big endian
target.
* emulparams/elf64ltsmip.sh: New. Traditional 64bit little
endian target.
H.J. Lu [Sun, 8 Apr 2001 05:11:49 +0000 (05:11 +0000)]
2001-04-05 Steven J. Hill <sjhill@cotw.com>
* config.bfd (mips*el*-*-linux-gnu*): Use traditional little
endian MIPS ELF target.
* config.bfd (mips*-*-linux-gnu*): Use traditional big endian
MIPS ELF target.
* configure.in (bfd_elf64_tradbigmips_vec): New. Traditional
64bit big endian MIPS ELF target.
(bfd_elf64_tradlittlemips_vec): New. Traditional 64bit little
endian MIPS ELF target.
* configure: Regenerated.
* elf32-mips.c (IRIX_COMPAT): Handle traditional 64bit and
little endian targets.
(mips_elf_sym_is_global): Handle traditional targets.
* elf64-mips.c (bfd_elf64_tradbigmips_vec): New. Traditional
64bit big endian MIPS ELF target.
(bfd_elf64_tradlittlemips_vec): New. Traditional 64bit little
endian MIPS ELF target.
* targets.c: (_bfd_target_vector): Add bfd_elf64_tradbigmips_vec
and bfd_elf64_tradlittlemips_vec.
David Smith [Fri, 6 Apr 2001 17:53:39 +0000 (17:53 +0000)]
2001-04-06 David Smith <dsmith@redhat.com>
* arch-utils.c (default_prepare_to_proceed)
(generic_prepare_to_proceed): Added new functions.
* arch-utils.h: New function declarations for
default_prepare_to_proceed() and generic_prepare_to_proceed().
* gdbarch.sh: Added PREPARE_TO_PROCEED.
* gdbarch.c: Regenerated.
* gdbarch.h: Regenerated.
* inferior.h: Added get_last_target_status() declaration.
* infrun.c (get_last_target_status): Added new function.
(handle_inferior_event): Saves last pid and waitstatus, which will
get returned by get_last_target_status().
* hppa-tdep.c (prepare_to_proceed): Added comment stating that
prepare_to_proceed() is potentially redundant since
default_prepare_to_proceed() has been added.
* linux-thread.c (prepare_to_proceed): Ditto.
* lin-lwp.c (prepare_to_proceed): Ditto.
* m3-nat.c (prepare_to_proceed): Ditto.
Fernando Nasser [Fri, 6 Apr 2001 12:09:30 +0000 (12:09 +0000)]
2001-04-06 Fernando Nasser <fnasser@redhat.com>
From David Deephanphongs <deephan@telocity.com>
* inferior.h: Fix declarations of get_inferior_args and
set_inferior_args, which were missing the trailing 's'.
* emulparams/criself.sh (EXECUTABLE_SYMBOLS): Cannot provide
correct value of __Stext here.
(TEXT_START_SYMBOLS): Define; always define __Stext, to start of
.startup section.
Elena Zannoni [Thu, 5 Apr 2001 15:19:42 +0000 (15:19 +0000)]
2001-04-05 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
From Jimmy Guo <guo@cup.hp.com>
* top.c (init_main): set prompt if annotation_level>1,
this is necessary when annotation_level is set to 2 via
--annotate=2 command line option.
* main.c: Remove windows.h use.
(gdbtk_test): Use PATH_MAX for home var calculation.
* remote-e7000.c (e7000_parse_device): Accomodate Cygwin as well as Win32 in
test.
* ser-tcp.c: Use modern __CYGWIN__ conditional.
* source.c (mod_path): Add __CYGWIN__ conditional to WIN32 test.
(openp): Ditto.
* symfile.c (symfile_bfd_open): Ditto.
* gdbtk/generic/gdbtk.c: Ditto.
* config/tc-cris.c (cris_insn_first_word_frag): New.
(md_assemble): Call cris_insn_first_word_frag to get the first
frag in an insn, not frag_more. Don't call dwarf2_emit_insn at
end. Drop variable insn_size.
(gen_bdap): Call cris_insn_first_word_frag, not frag_more.
(cris_sym_leading_underscore): Wrap first as_bad parameter in _().
(cris_sym_no_leading_underscore, s_cris_file, s_cris_loc): Ditto.
* config/tc-cris.c (md_estimate_size_before_relax) <case
ENCODE_RELAX (STATE_CONDITIONAL_BRANCH, STATE_UNDF)>: Don't emit
32-bit branch, just set fragP->fr_subtype. Set fragP->fr_var.
<all cases>: Always set fragP->fr_var using md_cris_relax_table.
Add cases to cover all relax states.
* remote.c (remote_protocol_e, remote_protocol_E): Define.
(set_remote_protocol_e_packet_cmd)
(set_remote_protocol_E_packet_cmd)
(show_remote_protocol_e_packet_command)
(show_remote_protocol_E_packet_command): New functions.
(init_all_packet_configs): Initialize remote_protocol_e and
remote_protocol_E.
(remote_resume, remote_async_resume): Support e/E command
packets.
(show_remote_cmd): Show state of remote_protocol_e and
remote_protocol_E.
(_initialize_remote): Add "set remote step-over-range-packet"
and "set remote step-over-range-w-signal-packet" to CLI.
-------------------------------------------------------------------
David O'Brien [Mon, 2 Apr 2001 23:44:03 +0000 (23:44 +0000)]
2001-04-01 David O'Brien <obrien@FreeBSD.org>
* ld-undefined/undefined.exp: XFAIL on FreeBSD/i386 for the usual (even
though it doesn't use DWARF2 yet (but its output is identical).
Approved by: Alan Modra <alan@linuxcare.com.au>
<Pine.LNX.4.21.0104021511350.487-100000@front.linuxcare.com.au>
David O'Brien [Mon, 2 Apr 2001 23:33:20 +0000 (23:33 +0000)]
001-04-01 David O'Brien <obrien@FreeBSD.org>
* ld-selective/selective.exp: Use -O with gcc rather than -O2.
This optimization level is buggy on some platforms, and this test
is not intended to test compiler optimizations.
Approved by: Alan Modra <alan@linuxcare.com.au>
<Pine.LNX.4.21.0104021510450.487-100000@front.linuxcare.com.au>
Eli Zaretskii [Mon, 2 Apr 2001 08:58:19 +0000 (08:58 +0000)]
* gdb.texinfo (Tracepoint Actions): Mention the "info scope"
command and provide a cross-reference to its description.
(Symbols): Note that "info scope" is useful for trace experiments.