Arnd Bergmann [Wed, 19 Mar 2025 20:42:19 +0000 (21:42 +0100)]
Merge tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.15, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add thermal support.
- Add Priva E-Measuringbox board support based on sTM32MP133C SoC.
It embeds Ethernet RMII with TI phy, SDCard, eMMC and some
sensors.
- Add support for DHCOR SoM and DHSBC rev.200 board:
TPM interrupts and gpio reset + LDO2/LDO5 support.
- STMP32MP15:
- Add new Octavo support: LXA FairyTux 2 based on OSD32MP153C SiP.
It contains eMMC for storage, a gigabit Ethernet, a CAN bus and
a RS485 transceiver.
- Add Plymovent AQM board based on STM32MP151 SoC. It embeds:
ETH RMII, WLAN, BT, Sensors (CO2, PM, pressure), Audio (I2S),
Storage (SDCard, eMMC).
- STM32MP25:
- Add STM32MP257F Discovery board: It embeds a STM32MP257FAL SoC,
with 4GB of LPDDR4, 2*USB typeA, 1*USB3 typeC, 1*ETH,
wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP23 SoC and add STM32MP235F Discovery board:
It embeds a STM32MP235FAK SoC, with 4GB of LPDDR4, 2*USB typeA,
1*USB3 typeC, 1*ETH, wifi/BT combo, DSI HDMI, LVDS connector ...
- Introduce STM32MP21 SoC and STM32MP215F discovery board:
It embeds a STM32MP235FAN SoC, with 2GB of LPDDR4,
1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT combo,
LCD 18bit connector, CSI camera connector, ...
* tag 'stm32-dt-for-v6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
arm64: dts: st: add stm32mp215f-dk board support
dt-bindings: stm32: document stm32mp215f-dk board
arm64: dts: st: introduce stm32mp21 SoCs family
arm64: dts: st: add stm32mp235f-dk board support
dt-bindings: stm32: document stm32mp235f-dk board
arm64: dts: st: introduce stm32mp23 SoCs family
dt-bindings: stm32: add STM32MP21 and STM32MP23 compatibles for syscon
arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family
arm64: dts: st: add stm32mp257f-dk board support
dt-bindings: stm32: document stm32mp257f-dk board
ARM: dts: stm32: Add Plymovent AQM devicetree
ARM: dts: stm32: Add pinmux groups for Plymovent AQM board
dt-bindings: arm: stm32: Add Plymovent AQM board
dt-bindings: sound: convert ICS-43432 binding to YAML
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board
ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2
ARM: dts: stm32: add usr3 LED node to stm32f769-disco
ARM: dts: stm32: rename LEDs nodes for stm32f769-disco
ARM: dts: stm32: add push button to stm32f746 Discovery board
ARM: dts: stm32: add led to stm32f746 Discovery board
...
AM62P/J722s:
Wakeup UART0 sysc updates for system wakeup
pinctrl node fixes drop pinctrl-single,gpio-ranges
BCDMA CSI-RX support
Audio REFCLKx output support
Arnd Bergmann [Fri, 14 Mar 2025 22:29:54 +0000 (23:29 +0100)]
Merge tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.15:
- New board support: S32G-EVB/RDB, i.MX95 15x15 EVK, i.MX8MP Skov
revC BD500 and new 7" panel board, i.MX8MM phyboard polis PEB-AV-10
- A series from Ahmad Fatoum and Oleksij Rempel to flesh out
imx8mp-skov device trees, correcting PMIC board limits, adding display
pipeline, configuring uart1 for RS485, etc.
- A bunch of changes from Alexander Stein, adding PCIe support for
mba8xx, enabling jpeg encode and decode for tqma8xx, adding vcc-supply
for spi-nor, etc.
- A series from Chancel Liu to complete WM8960 power supplies for NXP
i.MX8 based boards
- A dozen of changes from Frank Li, enabling audio codec for imx8qm-mek,
adding PCIe EP for i.MX8Q, improving i.MX93 and i.MX95 support, etc.
- A number of changes from Frieder Schrempf to support reading SD_VSEL
signal for imx8m-kontron devices, fix SD card IO voltage control for
imx93-kontron
- A series from Teresa Remmet to improve imx8mm-phycore support, keeping
LDO3 on in suspend, adding overlays for devices without Ethernet PHY,
SPI NOR Flash, etc.
- A couple of changes from Xu Yang to enable usb3 support for
imx95-19x19-evk board
- Other random improvements and cleanups on various boards
* tag 'imx-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (84 commits)
arm64: dts: imx8qm-apalis: Remove compatible from SoM dtsi
arm64: dts: imx8mp: change AUDIO_AXI_CLK_ROOT freq. to 800MHz
arm64: dts: imx8mp: add AUDIO_AXI_CLK_ROOT to AUDIOMIX block
arm64: dts: imx93: add ddr edac support
arm64: dts: imx95: add ref clock for pcie nodes
arm64: dts: mba8xx: Remove invalid property disable-gpio
arm64: dts: imx8qm-ss-hsio: Wire up DMA IRQ for PCIe
arm64: dts: im8mq-librem5: move dwc3 usb port under ports
arm64: dts: mba8mx: change sound card model name
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: change sound card model name
arm64: dts: s32g: add FlexCAN[0..3] support for s32g2 and s32g3
arm64: dts: imx95: Add imx95-15x15-evk support
arm64: dts: imx95: Add i3c1 and i3c2
arm64: dts: imx95: Add #io-channel-cells = <1> for adc node
arm64: dts: imx8mp-skov: support new 7" panel board
arm64: dts: imx8mp-skov: add revC BD500 board
arm64: dts: imx8mp-skov: describe I2C bus recovery for all controllers
arm64: dts: imx8mp-skov: move I2C2 pin control group into DTSI
arm64: dts: imx8mp-skov: add basic board as fallback
arm64: dts: freescale: imx8mp-skov: operate SoC in nominal mode
...
Arnd Bergmann [Fri, 14 Mar 2025 22:27:30 +0000 (23:27 +0100)]
Merge tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.15:
- New boards support: Variscite VAR-SOM-MX6UL SoM/Concerto, i.MX6
apalis/colibri v1.2, i.MX28 based btt3
- A bunch of TQMa6/7 cleanups from Alexander Stein and Markus Niebel,
ordering DT properties, correcting 3.3V supply, adding partitions
child node to spi-nor, etc.
- A bunch of changes from Fabio Estevam to fix dt-schema warnings on
various boards
- Other small and random changes
* tag 'imx-dt-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: apalis/colibri-imx6: Add support for v1.2
ARM: dts: apalis/colibri-imx6: Enable STMPE811 TS
ARM: dts: imx6ul: Add Variscite Concerto board support
ARM: dts: imx6ul: Add Variscite VAR-SOM-MX6UL SoM support
ARM: dts: vf610-colibri: Remove compatible from SoM dtsi
ARM: dts: imx6qdl-apalis/colibri: Remove compatible from SoM dtsi
ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node
ARM: dts: imx53-mba53: Fix the PCA9554 compatible
ARM: dts: imx31: Use nand-controller as node name
ARM: dts: vfxxx: Fix the order of the DMA entries
ARM: dts: tqma7: Add partitions subnode to spi-nor
ARM: dts: imx7-tqma7: Add vcc-supply for spi-nor
ARM: dts: tqma6ul: Add partitions subnode to spi-nor
ARM: dts: imx6ul-tqma6ul: Add vcc-supply for spi-nor
ARM: dts: imx6ul-tqma6ul: Order DT properties
ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor
ARM: dts: imx6qdl-tqma6: use sw4_reg as 3.3V supply
ARM: dts: imx6qdl-tqma6: limit PMIC SW4 to 3.3V
ARM: dts: imx6qdl-tqma6: Order DT properties
ARM: dts: imx7d-sdb: Complete WM8960 power supplies
...
Arnd Bergmann [Fri, 14 Mar 2025 22:26:19 +0000 (23:26 +0100)]
Merge tag 'imx-bindings-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.15:
- Add compatibles for Skov i.MX8MP variants, VAR-SOM-MX6UL SoM and
Concerto, i.MX95 15x15 EVK, btt3 i.MX28
- Drop Toradex SOMs compatibles
* tag 'imx-bindings-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add VAR-SOM-MX6UL SoM and Concerto board
dt-bindings: arm: fsl: drop usage of Toradex SOMs compatible alone
dt-bindings: arm: fsl: add i.MX95 15x15 EVK board
dt-bindings: arm: fsl: add more compatibles for Skov i.MX8MP variants
dt-bindings: arm: Document the btt3 i.MX28 based board
Arnd Bergmann [Fri, 14 Mar 2025 22:18:15 +0000 (23:18 +0100)]
Merge tag 'davinci-updates-for-v6.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into soc/dt
TI DaVinci updates for v6.15-rc1
- make GPIO hog names conform to bindings
* tag 'davinci-updates-for-v6.15-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
ARM: dts: ti: davinci: Align GPIO hog name with bindings
Arnd Bergmann [Fri, 14 Mar 2025 17:47:08 +0000 (18:47 +0100)]
Merge tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.15
1. Google GS101:
- Disable GSA core pinctrl because its registers are not available for
normal world.
- Add APM (Active Power Management) mailbox and the ACPM firmware nodes.
- Add new boards: Google Pixel 6 Pro (Raven).
- Enable framebuffer and reboot-mode.
3. Exynos8895:
- Define all remaining serial engine (USI) and syscon nodes, add MMC.
- Enable microSD and touchsreen on Samsung Galaxy S8 (dreamlte).
4. ExynosAutov920: Add UFS and CPU cache information.
5. Various cleanups.
This includes two topic branches with DT bindings, which might be shared
with other trees depending on needs:
1. for-v6.15/samsung-clk-dt-bindings with Exynos990 clock controller
header constants.
2. for-v6.15/samsung-soc-dt-bindings with Exynos USI serial engines
header constants rework.
* tag 'samsung-dt64-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (25 commits)
arm64: dts: tesla: Change labels to lower-case
arm64: dts: exynos: gs101: Change labels to lower-case
arm64: dts: exynosautov920: add ufs phy for ExynosAutov920 SoC
arm64: dts: exynosautov920: add CPU cache information
arm64: dts: exynos: gs101: add ACPM protocol node
arm64: dts: exynos: gs101: add AP to APM mailbox node
arm64: dts: exynos: gs101: add SRAM node
arm64: dts: exynos: gs101: add reboot-mode support (SYSIP_DAT0)
arm64: dts: exynos: gs101: align poweroff writes with downstream
arm64: dts: exynos: gs101: drop explicit regmap from reboot nodes
arm64: dts: exynos8895: Rename PMU nodes to fixup sorting
arm64: dts: exynos8895-dreamlte: enable support for the touchscreen
arm64: dts: exynos8895-dreamlte: enable support for microSD storage
arm64: dts: exynos8895: add a node for mmc
arm64: dts: exynos8895: define all usi nodes
arm64: dts: exynos8895: add syscon nodes for peric0/1 and fsys0/1
arm64: dts: exynos990: Rename and sort PMU nodes
arm64: dts: exynos990: Add CMU_PERIS and MCT nodes
dt-bindings: soc: samsung: usi: add USIv1 and samsung,exynos8895-usi
dt-bindings: clock: exynos990: Add CMU_PERIS block
...
Arnd Bergmann [Fri, 14 Mar 2025 17:43:40 +0000 (18:43 +0100)]
Merge tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: MNT-Reform2 laptop (rk3588), OrangePi5-Ultra (rk3588),
Radxa Rock 4D (rk3576), Firefly ROC-RK3576-PC, Photonicat (rk3568)
New overlays: Video-adapters for Theobroma boards and one adapter used
in hw test scenarios.
Interesting bigger changes contain clock support for rk3528; support for
the hdmi1 controller as well as hdmi-audio support on both controllers on
rk3588; the hdmi-receiver of the rk3588 landed, and rk3576 got basic
graphics support and can now do hdmi output.
Another big block is that we're now doing overlays way better and are
including build-testing for applied overlays to the base dtb - similar
to how other arches already do this.
Of cours a big list of more controllers for rk3576 (nvmem, sfc), rk3588
(rng, spdif, regulator for gpu power-domain) and rk3528 (saradc, pinctrl)
And a huge number of board-level improvements and additions.
* tag 'v6.15-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (89 commits)
arm64: dts: rockchip: Add SPI NOR device on the ROCK 4D
arm64: dts: rockchip: Add SFC nodes for rk3576
arm64: dts: rockchip: Add maskrom button to Radxa E20C
arm64: dts: rockchip: Add SARADC node for RK3528
arm64: dts: rockchip: Add user button to Radxa E20C
arm64: dts: rockchip: Add leds node to Radxa E20C
arm64: dts: rockchip: Add HDMI support for rock-4d
arm64: dts: rockchip: enable SCMI clk for RK3528 SoC
arm64: dts: rockchip: Enable HDMI receiver on rock-5b
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
arm64: dts: rockchip: Add rk3528 QoS register node
dt-bindings: mfd: syscon: Add rk3528 QoS register compatible
arm64: dts: rockchip: add MNT Reform 2 laptop
dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE)
dt-bindings: soc: rockchip: Add RK3528 VPU GRF syscon
dt-bindings: soc: rockchip: Add RK3528 VO GRF syscon
arm64: dts: rockchip: Enable hdmi out display for rk3576-evb-v10
arm64: dts: rockchip: Enable hdmi display on sige5
arm64: dts: rockchip: Add hdmi for rk3576
arm64: dts: rockchip: Add vop for rk3576
...
Arnd Bergmann [Fri, 14 Mar 2025 17:42:34 +0000 (18:42 +0100)]
Merge tag 'tegra-for-6.15-arm64-dt-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.15-rc1
This contains a patch to remove an unusable key that was erroneously
exposed as well as a fix to support GPUs with a large amount of video
memory on IGX Orin.
Finally, some additional devices, such as a temperature sensor, are
enabled on Jetson TX1, the output voltage of some pins is adjusted and
the VDD_LCD_1V8_DIS power supply now uses the correct enable GPIO.
* tag 'tegra-for-6.15-arm64-dt-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: p2180: Add TMP451 temperature sensor node
arm64: tegra: p2597: Enable TCA9539 as IRQ controllers
arm64: tegra: Define pinmuxing for gpio pads on Tegra210
arm64: tegra: p2597: Fix gpio for vdd-1v8-dis regulator
arm64: tegra: Resize aperture for the IGX PCIe C5 slot
arm64: tegra: Remove the Orin NX/Nano suspend key
arm64: dts: amd/seattle: Move and simplify fixed clocks
The fixed clocks are not part of "simple-bus", so move them out of the
bus to the top-level. In the process, use the preferred node names of
"clock-<freq>". There's also little reason to have multiple fixed
clocks at the same frequencies, so remove them keeping the labels
to minimize the change.
Amelie Delaunay [Tue, 25 Feb 2025 08:54:13 +0000 (09:54 +0100)]
arm64: dts: st: add stm32mp215f-dk board support
Add STM32MP215F Discovery Kit board support. It embeds a STM32MP235FAN SoC,
with 2GB of LPDDR4, 1*USB2 peripheral bus powered typeC, 1*ETH, wifi/BT
combo, LCD 18bit connector, CSI camera connector, ...
Alexandre Torgue [Tue, 25 Feb 2025 08:54:11 +0000 (09:54 +0100)]
arm64: dts: st: introduce stm32mp21 SoCs family
STM32MP21 family is composed of 3 SoCs defined as following:
-STM32MP211: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, parallel display, 1*ETH ...
-STM32MP213: STM32MP211 + a second ETH, CAN-FD.
-STM32MP215: STM32MP213 + Display and CSI2.
A second diversity layer exists for security features/ A35 frequency:
-STM32MP21xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Alexandre Torgue [Tue, 25 Feb 2025 08:54:08 +0000 (09:54 +0100)]
arm64: dts: st: introduce stm32mp23 SoCs family
STM32MP23 family is composed of 3 SoCs defined as following:
-STM32MP231: common part composed of 1*Cortex-A35, common peripherals
like SDMMC, UART, SPI, I2C, parallel display, 1*ETH ...
-STM32MP233: STM32MP231 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD.
-STM32MP235: STM32MP233 + GPU/AI and video encode/decode, DSI and LDVS
display.
A second diversity layer exists for security features/ A35 frequency:
-STM32MP23xY, "Y" gives information:
-Y = A means A35@1.2GHz + no cryp IP and no secure boot.
-Y = C means A35@1.2GHz + cryp IP and secure boot.
-Y = D means A35@1.5GHz + no cryp IP and no secure boot.
-Y = F means A35@1.5GHz + cryp IP and secure boot.
Amelie Delaunay [Tue, 25 Feb 2025 08:54:06 +0000 (09:54 +0100)]
arm64: Kconfig: expand STM32 Armv8 SoC with STM32MP21/STM32MP23 SoCs family
Expand config ARCH_STM32 with two new SoCs families:
- STM32MP21 SoCs family, which is composed of STM32MP211, STM32MP213 and
STM32MP215 SoCs;
- STM32MP23 SoCs family, which is composed of STM32MP231, STM32MP233 and
STM32MP235 SoCs.
ARM: dts: apalis/colibri-imx6: Add support for v1.2
Apalis/Colibri iMX6 V1.2 replaced the STMPE811 ADC/touch controller,
which is EOL, with the TLA2024 ADC and AD7879 touch controller.
Accurately describe the new hardware.
v1.1 of these SoMs is still described by the following DTSI files:
imx6qdl-apalis.dtsi
imx6qdl-colibri.dtsi
v1.2 is now supported by a DTSI that modifies v1.1:
imx6qdl-apalis-v1.2.dtsi
imx6qdl-colibri-v1.2.dtsi
For each carrier board using these modules, a new DTS file was added
that includes the v1.1 DTS and modifies it with this v1.2 DTSI.
The original DTS can be used for modules up to and including v1.1.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the STMPE811 touchscreen in the SOM dtsi files. The STMPE811 is
part of the SOM. It's self contained within it, therefore, disabling it
is not the correct default behavior.
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Support is handled with a SoM-centric dtsi exporting the default
interfaces along the default pinmuxing to be enabled by the board dts
file.
I tested this on a VAR-SOM-6UL_G2_700C_512R_8N_IT_REV1.3A, which is why
some of the features above are mentioned as "not configured" (I couldn't
test them).
This file is based on the one provided by Variscite on their own kernel,
but adapted for mainline.
arm64: dts: imx8mp: change AUDIO_AXI_CLK_ROOT freq. to 800MHz
AUDIO_AXI_CLK_ROOT can't run at currently requested 600MHz w/ its parent
SYS_PLL1 configured at 800MHz. Configure it to run at 800MHz as some
applications running on the DSP expect the core to run at this frequency
anyways. This change also affects the AUDIOMIX NoC.
Frank Li [Tue, 25 Feb 2025 17:08:02 +0000 (12:08 -0500)]
arm64: dts: imx95: add ref clock for pcie nodes
Add "ref" clock for i.MX95's pcie and fix below CHECK_DTBS warnings:
arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb: pcie@4c300000: clock-names: ['pcie', 'pcie_bus', 'pcie_phy', 'pcie_aux'] is too short
from schema $id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Max Merchel [Tue, 25 Feb 2025 14:44:35 +0000 (15:44 +0100)]
ARM: dts: imx6ul-tqma6ul1: Change include order to disable fec2 node
TQMa6UL1 has only one FEC which needs to be disabled as one of the last
steps.
imx6ul-tqma6ul2.dtsi can't be included in imx6ul-tqma6ul1.dtsi as the
defaults from imx6ul.dtsi will be applied again.
Alexander Stein [Tue, 25 Feb 2025 10:27:22 +0000 (11:27 +0100)]
arm64: dts: imx8qm-ss-hsio: Wire up DMA IRQ for PCIe
IRQ mapping is already present. Add the missing DMA interrupt. This is
similar to commit 9d9c56025e429 ("arm64: dts: imx8-ss-hsio: Wire up DMA
IRQ for PCIe")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Frank Li [Mon, 24 Feb 2025 19:33:07 +0000 (14:33 -0500)]
arm64: dts: im8mq-librem5: move dwc3 usb port under ports
Move port@0 and port@1 under ports to fix below DTB_CHECK warnings.
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb@38100000: port@0:reg:0:0: 0 is less than the minimum of 1
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: usb@38100000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'dr_mode', 'phy-names', 'phys', 'port@0', 'port@1', 'snps,parkmode-disable-ss-quirk' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Mon, 24 Feb 2025 15:00:15 +0000 (16:00 +0100)]
arm64: dts: mba8mx: change sound card model name
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same model name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Mon, 24 Feb 2025 15:00:14 +0000 (16:00 +0100)]
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: change sound card model name
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same model name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Wed, 19 Feb 2025 08:17:44 +0000 (09:17 +0100)]
ARM: dts: tqma7: Add partitions subnode to spi-nor
The bootloader adds MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Wed, 19 Feb 2025 08:17:42 +0000 (09:17 +0100)]
ARM: dts: tqma6ul: Add partitions subnode to spi-nor
The bootloader adds MTD partitions in this subnode if present, or in the
spi-nor node itself otherwise.
Setting #size-cells in MTD nodes itself is deprecated by mtd.yaml.
Fix all this by adding an empty partitions node which the bootloader will
fill with configured MTD partitions. Remove the deprecated properties
as well.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Niebel [Wed, 19 Feb 2025 08:17:39 +0000 (09:17 +0100)]
ARM: dts: imx6qdl-tqma6: Add partitions subnode to spi-nor
The bootloader may add MTD partitions in this subnode if present.
Add an empty partitions node which the bootloader will fill with
configured MTD partitions. Remove #size-cells from MTD node
because this is deprecated.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Oleksij Rempel [Tue, 18 Feb 2025 18:38:14 +0000 (19:38 +0100)]
arm64: dts: imx8mp-skov: add basic board as fallback
All Skov i.MX8MP boards share the same baseboard (modulo revisions)
and are booted with the same bootloader image, which samples some
strapping pins at startup and determines which kernel device tree
to use.
For use as bootloader device tree and as fallback, when no matching
device tree has been found, add a basic variant that doesn't configure
any variant-specific peripherals like displays.
Ahmad Fatoum [Tue, 18 Feb 2025 18:26:45 +0000 (19:26 +0100)]
arm64: dts: freescale: imx8mp-skov: operate SoC in nominal mode
To reduce heat generation, the Skov i.MX8MP boards should run in nominal
drive mode with a VDD_SOC voltage of 850 mV.
At this operating point, not all frequencies that are achievable with
overdrive mode are possible, so import imx8mp-nominal.dtsi to clock down
the clocks.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ahmad Fatoum [Tue, 18 Feb 2025 18:26:43 +0000 (19:26 +0100)]
arm64: dts: imx8mp: add fsl,nominal-mode property into nominal.dtsi
The imx8mp-nominal.dtsi is meant to be included into boards that want to
override the default overdrive clock settings with settings suitable for
running in nominal drive mode at its lower required voltage.
Specifying fsl,operating-mode = "nominal" informs drivers of this fact,
so they can sanity check runtime clock reconfiguration to observe the
limits imposed by nominal mode.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Unlike the i.MX8MM and i.MX8MN SoCs added earlier, the device tree for
the i.MX8MP configures some clocks at frequencies that are only validated
for overdrive mode, i.e. when VDD_SOC is 950 mV.
Boards may want to run their SoC at the lower voltage of 850 mV though
to reduce heat generation and power usage. For this to work, clock rates
need to adhere to the limits of the nominal drive mode.
Add an optional DTSI file which can be included by various boards to run
in this mode.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Tue, 4 Feb 2025 18:27:37 +0000 (19:27 +0100)]
arm64: dts: imx8mp: configure GPU and NPU clocks to overdrive rate
A lot of other clocks on the i.MX8MP, including the DRAM set up by the
bootloader are already running at overdrive clock rates. While this is a
deviation from the configuration of other i.MX8M* family SoCs, overdrive
is the default for most i.MX8MP boards and only some special purpose
boards will choose to run the SoC at nominal drive rates. Up the GPU and
NPU clock rates to their overdrive level to be consistent with other
clocks set up in the dtsi.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mathew McBride [Wed, 5 Mar 2025 00:19:01 +0000 (11:19 +1100)]
arm64: dts: freescale: ten64: add usb hub definition
A device tree binding for the Microchip USB5744 hub controller
was added in commit 02be19e914b8 ("dt-bindings: usb: Add support
for Microchip usb5744 hub controller").
U-Boot will consume this binding in order to perform the
necessary actions to enable the USB hub ports over I2C.
(We previously used our own out-of-tree driver for
this task)
The Ten64 board does not have any switchable supplies
for the voltage rails utilized by the USB5744, so a
pair of dummy supplies have been added to facilitate
operation with U-Boot's hub driver.
Marek Vasut [Sun, 2 Mar 2025 15:25:14 +0000 (16:25 +0100)]
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC rev.200 board
LDO2 is expansion connector supply on STM32MP13xx DHCOR DHSBC rev.200.
LDO5 is carrier board supply on STM32MP13xx DHCOR DHSBC rev.200. Keep
both regulators always enabled to make sure both the carrier board and
the expansion connector is always powered on and supplied with correct
voltage.
Describe ST33TPHF2XSPI TPM 2.0 chip interrupt and reset lines.
The Quality-of-Service (QsS) node stores/restores specific
register contents when the power domains is turned off/on.
Add QoS node so that they can connect to the power domain.
Diogo Ivo [Mon, 24 Feb 2025 12:17:37 +0000 (12:17 +0000)]
arm64: tegra: Define pinmuxing for gpio pads on Tegra210
As the gpio pads are capable of operating at either 1.8V or 3.3V add
both options to the pinmuxing so that the appropriate level can be set
depending on the voltage of the regulator driving the pads.
Diogo Ivo [Mon, 24 Feb 2025 12:17:36 +0000 (12:17 +0000)]
arm64: tegra: p2597: Fix gpio for vdd-1v8-dis regulator
According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.
Jon Hunter [Thu, 16 Jan 2025 15:19:03 +0000 (15:19 +0000)]
arm64: tegra: Resize aperture for the IGX PCIe C5 slot
Some discrete graphics cards such as the NVIDIA RTX A6000 support
resizable BARs. When connecting an A6000 card to the NVIDIA IGX Orin
platform, resizing the BAR1 aperture to 8GB fails because the current
device-tree configuration for the PCIe C5 slot cannot support this.
Fix this by updating the device-tree 'reg' and 'ranges' properties for
the PCIe C5 slot to support this.
Ninad Malwade [Thu, 6 Feb 2025 22:40:34 +0000 (22:40 +0000)]
arm64: tegra: Remove the Orin NX/Nano suspend key
As per the Orin Nano Dev Kit schematic, GPIO_G.02 is not available
on this device family. It should not be used at all on Orin NX/Nano.
Having this unused pin mapped as the suspend key can lead to
unpredictable behavior for low power modes.
Orin NX/Nano uses GPIO_EE.04 as both a "power" button and a "suspend"
button. However, we cannot have two gpio-keys mapped to the same
GPIO. Therefore remove the "suspend" key.
Thierry Reding [Thu, 6 Mar 2025 17:50:35 +0000 (18:50 +0100)]
dt-bindings: Document Tegra114 HDA support
The HDA hardware on Tegra114 is almost identical to the one found on
Tegra30 or Tegra124. Add a compatible string to allow matching in case
it's ever needed. Typically the match on Tegra30 should be sufficient.
projects / thirdparty / kernel / linux.git / log
