rebase --autostash: fix issue with dirty submodules
Since we cannot stash dirty submodules, there is no use in requiring
them to be clean (or stash them when they are not).
This brings the built-in rebase in line with the previous, scripted
version, which also did not care about dirty submodules (but it was
admittedly not very easy to figure that out).
This fixes https://github.com/git-for-windows/git/issues/1820
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase (autostash): use an explicit OID to apply the stash
When `git stash apply <argument>` sees an argument that consists only of
digits, it tries to be smart and interpret it as `stash@{<number>}`.
Unfortunately, an all-digit hash (which is unlikely but still possible)
is therefore misinterpreted as `stash@{<n>}` reflog.
To prevent that from happening, let's append `^0` after the stash hash,
to make sure that it is interpreted as an OID rather than as a number.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase (autostash): store the full OID in <state-dir>/autostash
It was reported by Gábor Szeder and analyzed by Alban Gruin that the
built-in rebase stores only abbreviated stash hashes in the `autostash`
file.
This is problematic e.g. in t5520-pull.sh, where the abbreviated hash is
so short that it sometimes consists only of digits, which are
subsequently mistaken ("DWIMmed") for numbers by `git stash apply`.
Let's align the behavior of the built-in rebase with the scripted rebase
and store the full stash hash instead. That makes it a lot less likely
that it consists only of digits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase (autostash): avoid duplicate call to state_dir_path()
We already called that function at this point, and stored the result in
the `path` variable. We might just as well use it ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Wed, 8 Aug 2018 15:53:02 +0000 (21:38 +0545)]
rebase: default to using the builtin rebase
Now that the builtin rebase is feature-complete, we should use it by
default. Let's keep the legacy scripted version around for the time
being; Once the builtin rebase is well-tested enough, we can remove
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The builtin rebase and the builtin interactive rebase have been
developed independently, on purpose: Google Summer of Code rules
specifically state that students have to work on independent projects,
they cannot collaborate on the same project.
One fallout is that the rebase-in-c and rebase-i-in-c patches cause no
merge conflicts but a royal number of tests in the test suite to fail.
It is easy to explain why: rebase-in-c was developed under the
assumption that all rebase backends are implemented in Unix shell script
and can be sourced via `. git-rebase--<backend>`, which is no longer
true with rebase-i-in-c, where git-rebase--interactive is a hard-linked
builtin.
This patch fixes that.
Please note that we also skip the finish_rebase() call for interactive
rebases because the built-in interactive rebase already takes care of
that. This is needed to support the upcoming `break` command that wants
to interrupt the rebase with exit code 0 (and naturally wants to keep
the state directory intact when doing so).
While at it, remove the `case` arm for the interactive rebase that is
now skipped in favor of the short-cut to the built-in rebase.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 11 Oct 2018 05:18:19 +0000 (14:18 +0900)]
Merge branch 'ag/rebase-i-in-c' into js/rebase-in-c-5.5-work-with-rebase-i-in-c
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
Pratik Karki [Wed, 8 Aug 2018 15:36:35 +0000 (21:21 +0545)]
builtin rebase: error out on incompatible option/mode combinations
While working on the GSoC project to convert the rebase command to a
builtin, the rebase command learned to error out on certain command-line
option combinations that cannot work, such as --whitespace=fix with
--interactive.
This commit converts that code.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Wed, 8 Aug 2018 15:36:34 +0000 (21:21 +0545)]
builtin rebase: use no-op editor when interactive is "implied"
Some options are only handled by the git-rebase--interactive backend,
even if run non-interactively. For this awkward situation (run
non-interactively, but use the interactive backend), the shell scripted
version of `git rebase` introduced the concept of an "implied
interactive rebase". All it does is to replace the editor by a dummy one
(`:` is the Unix command that takes arbitrary command-line parameters,
ignores them and simply exits with success).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Wed, 8 Aug 2018 15:36:30 +0000 (21:21 +0545)]
builtin rebase: optionally auto-detect the upstream
The `git rebase` command, when called without the `<upstream>`
command-line argument, automatically looks for the upstream
branch configured for the current branch.
With this commit, the builtin rebase learned that trick, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option allows to rebase entire histories up to, and including, the
root commit.
The conversion from the shell script is straight-forward, apart from
the fact that we do not have to write an empty tree in C.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: add support for custom merge strategies
When running a rebase in non-am mode, it uses the recursive merge to
cherry-pick the commits, and the rebase command allows to configure
the merge strategy to be used in this operation.
This commit adds that support to the builtin rebase.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--fork-point` and `--no-fork-point`.
This is converted as-is from `git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-base --fork-point: extract libified function
We need this functionality in the builtin rebase.
Note: to make this function truly reusable, we have to switch the call
get_merges_many_dirty() to get_merges_many() because we want the commit
flags to be reset (otherwise, subsequent get_merge_bases() calls would
obtain incorrect results). This did not matter when the function was
called in `git rev-parse --fork-point` because in that command, the
process definitely did not traverse any commits before exiting.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: support --rebase-merges[=[no-]rebase-cousins]
The mode to rebase non-linear branches is now supported by the builtin
rebase, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: support `--allow-empty-message` option
This commit introduces the `--allow-empty-message` option to
`builtin/rebase.c`. The motivation behind this option is: if there are
empty messages (which is not allowed in Git by default, but can be
imported from different version control systems), the rebase will fail.
Using `--allow-empty-message` overrides that behaviour which will allow
the commits having empty messages to continue in rebase operation.
Note: a very recent change made this the default in the shell scripted
`git rebase`, therefore the builtin rebase does the same.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--exec` option which takes a shell
command-line as argument. This argument will be appended as an `exec
<cmd>` command after each line in the todo list that creates a commit in
the final history. commands.
Note: while the shell script version of `git rebase` assigned the empty
string to `cmd` by default, we *unset* it here because the code looks
nicer and it does not change the behavior.
The `--exec` option requires `--interactive` machinery.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
To support `--autostash` we introduce a function `apply_autostash()`
just like in `git-legacy-rebase.sh`.
Rather than refactoring and using the same function that exists in
`sequencer.c`, we go a different route here, to avoid clashes with
the sister GSoC project that turns the interactive rebase into a
builtin.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: support `-C` and `--whitespace=<type>`
This commit converts more code from the shell script version to the
builtin rebase. In this instance, we just have to be careful to
keep support for passing multiple `--whitespace` options, as the
shell script version does so, too.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces support for `--gpg-sign` option which is used
to GPG-sign commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Thu, 27 Sep 2018 21:56:10 +0000 (23:56 +0200)]
rebase -i: move rebase--helper modes to rebase--interactive
This moves the rebase--helper modes still used by
git-rebase--preserve-merges.sh (`--shorten-ids`, `--expand-ids`,
`--check-todo-list`, `--rearrange-squash` and `--add-exec-commands`) to
rebase--interactive.c.
git-rebase--preserve-merges.sh is modified accordingly, and
rebase--helper.c is removed as it is useless now.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Thu, 27 Sep 2018 21:56:07 +0000 (23:56 +0200)]
rebase -i: implement the main part of interactive rebase as a builtin
This rewrites the part of interactive rebase which initializes the
basic state, make the script and complete the action, as a buitin, named
git-rebase--interactive2 for now. Others modes (`--continue`,
`--edit-todo`, etc.) will be rewritten in the next commit.
git-rebase--interactive.sh is modified to call git-rebase--interactive2
instead of git-rebase--helper.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for the `--autosquash` option which is used to
automatically squash the commits marked as `squash` or `fixup` in their
messages. This is converted following `git-legacy-rebase.sh` closely.
This option can also be configured via the Git config setting
rebase.autosquash. To support this, we also add a custom
rebase_config() function in this commit that will be used instead (and
falls back to) git_default_config().
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--keep-empty` option can be used to keep the commits that do not
change anything from its parents in the result.
While the scripted version uses `interactive_rebase=implied` to indicate
that the rebase needs to use the `git-rebase--interactive` backend in
non-interactive mode as fallback when figuring out which backend to use,
the C version needs to use a different route because the backend will
already be chosen during the `parse_options()` call.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--ignore-date` which is passed to `git am`
to easily change the dates of the rebased commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: support `ignore-whitespace` option
This commit adds support for the `--ignore-whitespace` option
of the rebase command. This option is simply passed to the
`--am` backend.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: support --committer-date-is-author-date
This option is simply handed down to `git am` by way of setting the
`git_am_opt` variable that is handled by the `git-rebase--am` backend.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--rerere-autoupdate` option allows rerere to update the index with
resolved conflicts. This commit follows closely the equivalent part of
`git-legacy-rebase.sh`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds support for `--signoff` which is used to add a
`Signed-off-by` trailer to all the rebased commits. The actual
handling is left to the rebase backends.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: allow selecting the rebase "backend"
With this commit the builtin rebase supports selecting the "rebase
backends" (or "type") `interactive`, `preserve-merges`, and `merge`.
The `state_dir` was already handled according to the rebase type in a
previous commit.
Note that there is one quirk in the shell script: `--interactive`
followed by `--merge` won't reset the type to "merge" but keeps the type
as "interactive". And as t3418 tests this explicitly, we have to support
it in the builtin rebase, too.
Likewise, `--interactive` followed by `--preserve-merges` makes it an
"explicitly interactive" rebase, i.e. a rebase that should show the todo
list, while `--preserve-merges` alone is not interactive (and t5520
tests for this via `git pull --rebase=preserve`).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Wed, 8 Aug 2018 15:06:22 +0000 (20:51 +0545)]
builtin rebase: stop if `git am` is in progress
This commit checks for the file `applying` used by `git am` in
`rebase-apply/` and if the file is present it means `git am` is in
progress so it errors out.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Wed, 8 Aug 2018 15:06:20 +0000 (20:51 +0545)]
builtin rebase: support --edit-todo and --show-current-patch
While these sub-commands are very different in spirit, their
implementation is almost identical, so we convert them in one go.
And since those are the last sub-commands that needed to be converted,
now we can also turn that `default:` case into a bug (because we should
now handle all the actions).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Wed, 8 Aug 2018 15:06:19 +0000 (20:51 +0545)]
builtin rebase: support --quit
With this patch, the builtin rebase handles the `--quit` action which
can be used to abort a rebase without rolling back any changes performed
during the rebase (this is useful when a user forgot that they were in
the middle of a rebase and continued working normally).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Wed, 8 Aug 2018 15:06:16 +0000 (20:51 +0545)]
builtin rebase: support --continue
This commit adds the option `--continue` which is used to resume
rebase after merge conflicts. The code tries to stay as close to
the equivalent shell scripts found in `git-legacy-rebase.sh` as
possible.
When continuing a rebase, the state variables are read from state_dir.
Some of the state variables are not actually stored there, such as
`upstream`. The shell script version simply does not set them, but for
consistency, we unset them in the builtin version.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: support `git rebase <upstream> <switch-to>`
This commit adds support for `switch-to` which is used to switch to the
target branch if needed. The equivalent codes found in shell script
`git-legacy-rebase.sh` is converted to builtin `rebase.c`.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: only store fully-qualified refs in `options.head_name`
When running a rebase on a detached HEAD, we currently store the string
"detached HEAD" in options.head_name. That is a faithful translation of
the shell script version, and we still kind of need it for the purposes of
the scripted backends.
It is poor style for C, though, where we would really only want a valid,
fully-qualified ref name as value, and NULL for detached HEADs, using
"detached HEAD" for display only. Make it so.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: start a new rebase only if none is in progress
To run a new rebase, there needs to be a check to assure that no other
rebase is in progress. New rebase operation cannot start until an
ongoing rebase operation completes or is terminated.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this commit, we add support to `--force-rebase` option. The
equivalent part of the shell script found in `git-legacy-rebase.sh` is
converted as faithfully as possible to C.
The --force-rebase option ensures that the rebase does not simply
fast-forward even if it could.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note: we will need the merge base later, therefore the call to
can_fast_forward() really needs to be the first one when testing whether
we can skip the rebase entirely (otherwise, it would make more sense to
skip the possibly expensive operation if, say, running an interactive
rebase).
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit reads the index of the repository for rebase and checks
whether the repository is ready for rebase.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: support the `verbose` and `diffstat` options
This commit introduces support for the `-v` and `--stat` options of
rebase.
The --stat option can also be configured via the Git config setting
rebase.stat. To support this, we also add a custom rebase_config()
function in this commit that will be used instead of (and falls back to
calling) git_default_config().
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit introduces a rebase option `--quiet`. While `--quiet` is
commonly perceived as opposite to `--verbose`, this is not the case for
the rebase command: both `--quiet` and `--verbose` default to `false` if
neither `--quiet` nor `--verbose` is present.
Despite the default being `false` for both verbose and quiet mode,
passing the `--quiet` option will turn off verbose mode, and `--verbose`
will turn off quiet mode.
This patch introduces the `flags` bit field, with `REBASE_NO_QUIET`
as first user (with many more to come).
We do *not* use `REBASE_QUIET` here for an important reason: To keep the
implementation simple, this commit introduces `--no-quiet` instead of
`--quiet`, so that a single `OPT_NEGBIT()` can turn on quiet mode and
turn off verbose and diffstat mode at the same time. Likewise, the
companion commit which will introduce support for `--verbose` will have
a single `OPT_BIT()` that turns off quiet mode and turns on verbose and
diffstat mode at the same time.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin rebase: handle the pre-rebase hook and --no-verify
This commit converts the equivalent part of the shell script
`git-legacy-rebase.sh` to run the pre-rebase hook (unless disabled), and
to interrupt the rebase with error if the hook fails.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit implements support for an --onto argument that is actually a
"symmetric range" i.e. `<rev1>...<rev2>`.
The equivalent shell script version of the code offers two different
error messages for the cases where there is no merge base vs more than
one merge base.
Though it would be nice to retain this distinction, dropping it makes it
possible to simply use the `get_oid_mb()` function. Besides, it happens
rarely in real-world scenarios.
Therefore, in the interest of keeping the code less complex, let's just
use that function, and live with an error message that does not
distinguish between those two error conditions.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--onto` option is important, as it allows to rebase a range of
commits onto a different base commit (which gave the command its odd
name: "rebase").
This commit introduces options parsing so that different options can
be added in future commits.
Note: As this commit introduces to the parse_options() call (which
"eats" argv[0]), the argc is now expected to be lower by one after this
patch, compared to before this patch: argv[0] no longer refers to the
command name, but to the first (non-option) command-line parameter.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Tue, 28 Aug 2018 12:10:40 +0000 (14:10 +0200)]
rebase -i: rewrite write_basic_state() in C
This rewrites write_basic_state() from git-rebase.sh in C. This is the
first step in the conversion of init_basic_state(), hence the mode in
rebase--helper.c is called INIT_BASIC_STATE. init_basic_state() will be
converted in the next commit.
The part of read_strategy_opts() that parses the stategy options is
moved to a new function to allow its use in rebase--helper.c.
Finally, the call to write_basic_state() is removed from
git-rebase--interactive.sh, replaced by a call to `--init-basic-state`.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Tue, 28 Aug 2018 12:10:39 +0000 (14:10 +0200)]
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
This rewrites the part of init_revisions_and_shortrevisions() needed by
`--complete-action` (which initialize $shortrevisions) from shell to C.
When `upstream` is empty, it means that the user launched a `rebase
--root`, and `onto` contains the ID of an empty commit. As a range
between an empty commit and `head` is not really meaningful, `onto` is
not used to initialize `shortrevisions` in this case.
The corresponding arguments passed to `--complete-action` are then
dropped, and init_revisions_and_shortrevisions() is stripped from
git-rebase--interactive.sh
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Tue, 28 Aug 2018 12:10:38 +0000 (14:10 +0200)]
rebase -i: implement the logic to initialize $revisions in C
This rewrites the part of init_revisions_and_shortrevisions() needed by
`--make-script` from shell to C. The new version is called
get_revision_ranges(), and is a static function inside of
rebase--helper.c. As this does not initialize $shortrevision, the
original shell version is not yet stripped.
Unlike init_revisions_and_shortrevisions(), get_revision_ranges()
doesn’t write $squash_onto to the state directory, it’s done by the
handler of `--make-script` instead.
Finally, this drops the $revision argument passed to `--make-script` in
git-rebase--interactive.sh, and rebase--helper is changed accordingly.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Tue, 28 Aug 2018 12:10:37 +0000 (14:10 +0200)]
rebase -i: remove unused modes and functions
This removes the modes `--skip-unnecessary-picks`, `--append-todo-help`,
and `--checkout-onto` from rebase--helper.c, the functions of
git-rebase--interactive.sh that were rendered useless by the rewrite of
complete_action(), and append_todo_help_to_file() from
rebase-interactive.c.
skip_unnecessary_picks() and checkout_onto() becomes static, as they are
only used inside of the sequencer.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Tue, 28 Aug 2018 12:10:36 +0000 (14:10 +0200)]
rebase -i: rewrite complete_action() in C
This rewrites complete_action() from shell to C.
A new mode is added to rebase--helper (`--complete-action`), as well as
a new flag (`--autosquash`).
Finally, complete_action() is stripped from git-rebase--interactive.sh.
The original complete_action() would return the code 2 when the todo
list contained no actions. This was a special case for rebase -i and
-p; git-rebase.sh would then apply the autostash, delete the state
directory, and die with the message "Nothing to do". This cleanup is
rewritten in C instead of returning 2. As rebase -i no longer returns
2, the comment describing this behaviour in git-rebase.sh is updated to
reflect this change.
The message "Nothing to do" is now printed with error(), and so becomes
"error: nothing to do". Some tests in t3404 check this value, so they
are updated to fit this change.
The first check might seem useless as we write "noop" to the todo list
if it is empty. Actually, the todo list might contain commented
commands (ie. empty commits). In this case, complete_action() won’t
write "noop", and will abort without starting the editor.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:37 +0000 (18:51 +0200)]
t3404: todo list with commented-out commands only aborts
If the todo list generated by `--make-script` is empty,
complete_action() writes a noop, but if it has only commented-out
commands, it will abort with the message "Nothing to do", and does not
launch the editor. This adds a new test to ensure that
complete_action() behaves this way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:36 +0000 (18:51 +0200)]
sequencer: change the way skip_unnecessary_picks() returns its result
Instead of skip_unnecessary_picks() printing its result to stdout, it
returns it into a struct object_id, as the rewrite of complete_action()
(to come in the next commit) will need it.
rebase--helper then is modified to fit this change.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:35 +0000 (18:51 +0200)]
sequencer: refactor append_todo_help() to write its message to a buffer
This refactors append_todo_help() to write its message to a buffer
instead of the todo-list. This is needed for the rewrite of
complete_action(), which will come after the next commit.
As rebase--helper still needs the file manipulation part of
append_todo_help(), it is extracted to a temporary function,
append_todo_help_to_file(). This function will go away after the
rewrite of complete_action().
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:33 +0000 (18:51 +0200)]
rebase -i: rewrite setup_reflog_action() in C
This rewrites (the misnamed) setup_reflog_action() from shell to C. The
new version is called prepare_branch_to_be_rebased().
A new command is added to rebase--helper.c, “checkout-base”, as well as
a new flag, “verbose”, to avoid silencing the output of the checkout
operation called by checkout_base_commit().
The function `run_git_checkout()` will also be used in the next commit,
therefore its code is not part of `checkout_base_commit()`.
The shell version is then stripped in favour of a call to the helper.
As $GIT_REFLOG_ACTION is no longer set at the first call of
checkout_onto(), a call to comment_for_reflog() is added at the
beginning of this function.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:32 +0000 (18:51 +0200)]
sequencer: add a new function to silence a command, except if it fails
This adds a new function, run_command_silent_on_success(), to
redirect the stdout and stderr of a command to a strbuf, and then to run
that command. This strbuf is printed only if the command fails. It is
functionnaly similar to output() from git-rebase.sh.
run_git_commit() is then refactored to use of
run_command_silent_on_success().
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:31 +0000 (18:51 +0200)]
rebase -i: rewrite the edit-todo functionality in C
This rewrites the edit-todo functionality from shell to C.
To achieve that, a new command mode, `edit-todo`, is added, and the
`write-edit-todo` flag is removed, as the shell script does not need to
write the edit todo help message to the todo list anymore.
The shell version is then stripped in favour of a call to the helper.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:30 +0000 (18:51 +0200)]
editor: add a function to launch the sequence editor
As part of the rewrite of interactive rebase, the sequencer will need to
open the sequence editor to allow the user to edit the todo list.
Instead of duplicating the existing launch_editor() function, this
refactors it to a new function, launch_specified_editor(), which takes
the editor as a parameter, in addition to the path, the buffer and the
environment variables. launch_sequence_editor() is then added to launch
the sequence editor.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:29 +0000 (18:51 +0200)]
rebase -i: rewrite append_todo_help() in C
This rewrites append_todo_help() from shell to C. It also incorporates
some parts of initiate_action() and complete_action() that also write
help texts to the todo file.
This also introduces the source file rebase-interactive.c. This file
will contain functions necessary for interactive rebase that are too
specific for the sequencer, and is part of libgit.a.
Two flags are added to rebase--helper.c: one to call
append_todo_help() (`--append-todo-help`), and another one to tell
append_todo_help() to write the help text suited for the edit-todo
mode (`--write-edit-todo`).
Finally, append_todo_help() is removed from git-rebase--interactive.sh
to use `rebase--helper --append-todo-help` instead.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alban Gruin [Fri, 10 Aug 2018 16:51:28 +0000 (18:51 +0200)]
sequencer: make three functions and an enum from sequencer.c public
This makes rebase_path_todo(), get_missing_commit_check_level(),
write_message() and the enum check_level accessible outside sequencer.c,
renames check_level to missing_commit_check_level, and prefixes its
value names by MISSING_COMMIT_ to avoid namespace pollution.
This function and this enum will eventually be moved to
rebase-interactive.c and become static again, so no special attention
was given to the naming.
This will be needed for the rewrite of append_todo_help() from shell to
C, as it will be in a new library source file, rebase-interactive.c.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Mon, 6 Aug 2018 19:31:11 +0000 (01:16 +0545)]
builtin/rebase: support running "git rebase <upstream>"
This patch gives life to the skeleton added in the previous patches:
With this change, we can perform a elementary rebase (without any
options).
It can be tested thusly by:
git -c rebase.usebuiltin=true rebase HEAD~2
The rebase backends (i.e. the shell script functions defined in
`git-rebase--<backend>`) are still at work here and the "builtin
rebase"'s purpose is simply to parse the options and set
everything up so that those rebase backends can do their work.
Note: We take an alternative approach here which is *not* to set the
environment variables via `run_command_v_opt_cd_env()` because those
variables would then be visible by processes spawned from the rebase
backends. Instead, we work hard to set them in the shell script snippet.
On Windows, some of the tests fail merely due to core.fileMode not
being heeded that's why the core.*config variables is parsed here.
The `reset_head()` function is currently only used to detach the HEAD
to onto by way of starting the rebase, but it offers additional
functionality that subsequent patches will need like moving to the
original branch (possibly updating it) and also to do the equivalent of
`git reset --hard`.
The next commits will handle and support all the wonderful rebase
options.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Mon, 6 Aug 2018 19:31:10 +0000 (01:16 +0545)]
rebase: refactor common shell functions into their own file
The functions present in `git-legacy-rebase.sh` are used by the rebase
backends as they are implemented as shell script functions in the
`git-rebase--<backend>` files.
To make the `builtin/rebase.c` work, we have to provide support via
a Unix shell script snippet that uses these functions and so, we
want to use the rebase backends *directly* from the builtin rebase
without going through `git-legacy-rebase.sh`.
This commit extracts the functions to a separate file,
`git-rebase--common`, that will be read by `git-legacy-rebase.sh` and
by the shell script snippets which will be used extensively in the
following commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pratik Karki [Mon, 6 Aug 2018 19:31:09 +0000 (01:16 +0545)]
rebase: start implementing it as a builtin
This commit imitates the strategy that was used to convert the
difftool to a builtin. We start by renaming the shell script
`git-rebase.sh` to `git-legacy-rebase.sh` and introduce a
`builtin/rebase.c` that simply executes the shell script version,
unless the config setting `rebase.useBuiltin` is set to `true`.
The motivation behind this is to rewrite all the functionality of the
shell script version in the aforementioned `rebase.c`, one by one and
be able to conveniently test new features by configuring
`rebase.useBuiltin`.
In the original difftool conversion, if sane_execvp() that attempts to
run the legacy scripted version returned with non-negative status, the
command silently exited without doing anything with success, but
sane_execvp() should not return with non-negative status in the first
place, so we use die() to notice such an abnormal case.
We intentionally avoid reading the config directly to avoid
messing up the GIT_* environment variables when we need to fall back to
exec()ing the shell script. The test of builtin rebase can be done by
`git -c rebase.useBuiltin=true rebase ...`
Signed-off-by: Pratik Karki <predatoramigo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 2 Aug 2018 22:30:46 +0000 (15:30 -0700)]
Merge branch 'es/chain-lint-in-subshell'
Look for broken "&&" chains that are hidden in subshell, many of
which have been found and corrected.
* es/chain-lint-in-subshell:
t/chainlint.sed: drop extra spaces from regex character class
t/chainlint: add chainlint "specialized" test cases
t/chainlint: add chainlint "complex" test cases
t/chainlint: add chainlint "cuddled" test cases
t/chainlint: add chainlint "loop" and "conditional" test cases
t/chainlint: add chainlint "nested subshell" test cases
t/chainlint: add chainlint "one-liner" test cases
t/chainlint: add chainlint "whitespace" test cases
t/chainlint: add chainlint "basic" test cases
t/Makefile: add machinery to check correctness of chainlint.sed
t/test-lib: teach --chain-lint to detect broken &&-chains in subshells
Junio C Hamano [Thu, 2 Aug 2018 22:30:46 +0000 (15:30 -0700)]
Merge branch 'jt/fetch-negotiator-skipping'
Add a server-side knob to skip commits in exponential/fibbonacci
stride in an attempt to cover wider swath of history with a smaller
number of iterations, potentially accepting a larger packfile
transfer, instead of going back one commit a time during common
ancestor discovery during the "git fetch" transaction.
* jt/fetch-negotiator-skipping:
negotiator/skipping: skip commits during fetch
Junio C Hamano [Thu, 2 Aug 2018 22:30:46 +0000 (15:30 -0700)]
Merge branch 'jm/send-email-tls-auth-on-batch'
"git send-email" when using in a batched mode that limits the
number of messages sent in a single SMTP session lost the contents
of the variable used to choose between tls/ssl, unable to send the
second and later batches, which has been fixed.
* jm/send-email-tls-auth-on-batch:
send-email: fix tls AUTH when sending batch
"git rebase" started exporting GIT_DIR environment variable and
exposing it to hook scripts when part of it got rewritten in C.
Instead of matching the old scripted Porcelains' behaviour,
compensate by also exporting GIT_WORK_TREE environment as well to
lessen the damage. This can harm existing hooks that want to
operate on different repository, but the current behaviour is
already broken for them anyway.
* bc/sequencer-export-work-tree-as-well:
sequencer: pass absolute GIT_WORK_TREE to exec commands
Tests to cover conflict cases that involve submodules have been
added for merge-recursive.
* en/t7405-recursive-submodule-conflicts:
t7405: verify 'merge --abort' works after submodule/path conflicts
t7405: add a directory/submodule conflict
t7405: add a file/submodule conflict
Junio C Hamano [Thu, 2 Aug 2018 22:30:45 +0000 (15:30 -0700)]
Merge branch 'en/t6036-merge-recursive-tests'
Tests to cover various conflicting cases have been added for
merge-recursive.
* en/t6036-merge-recursive-tests:
t6036: add a failed conflict detection case: regular files, different modes
t6036: add a failed conflict detection case with conflicting types
t6036: add a failed conflict detection case with submodule add/add
t6036: add a failed conflict detection case with submodule modify/modify
t6036: add a failed conflict detection case with symlink add/add
t6036: add a failed conflict detection case with symlink modify/modify
Junio C Hamano [Thu, 2 Aug 2018 22:30:44 +0000 (15:30 -0700)]
Merge branch 'en/dirty-merge-fixes'
The recursive merge strategy did not properly ensure there was no
change between HEAD and the index before performing its operation,
which has been corrected.
* en/dirty-merge-fixes:
merge: fix misleading pre-merge check documentation
merge-recursive: enforce rule that index matches head before merging
t6044: add more testcases with staged changes before a merge is invoked
merge-recursive: fix assumption that head tree being merged is HEAD
merge-recursive: make sure when we say we abort that we actually abort
t6044: add a testcase for index matching head, when head doesn't match HEAD
t6044: verify that merges expected to abort actually abort
index_has_changes(): avoid assuming operating on the_index
read-cache.c: move index_has_changes() from merge.c
Junio C Hamano [Thu, 2 Aug 2018 22:30:44 +0000 (15:30 -0700)]
Merge branch 'js/rebase-merge-octopus'
"git rebase --rebase-merges" mode now handles octopus merges as
well.
* js/rebase-merge-octopus:
rebase --rebase-merges: adjust man page for octopus support
rebase --rebase-merges: add support for octopus merges
merge: allow reading the merge commit message from a file
Junio C Hamano [Thu, 2 Aug 2018 22:30:43 +0000 (15:30 -0700)]
Merge branch 'kg/gc-auto-windows-workaround'
"git gc --auto" opens file descriptors for the packfiles before
spawning "git repack/prune", which would upset Windows that does
not want a process to work on a file that is open by another
process. The issue has been worked around.
* kg/gc-auto-windows-workaround:
gc --auto: release pack files before auto packing
Junio C Hamano [Thu, 2 Aug 2018 22:30:43 +0000 (15:30 -0700)]
Merge branch 'jm/cache-entry-from-mem-pool'
For a large tree, the index needs to hold many cache entries
allocated on heap. These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.
* jm/cache-entry-from-mem-pool:
block alloc: add validations around cache_entry lifecyle
block alloc: allocate cache entries from mem_pool
mem-pool: fill out functionality
mem-pool: add life cycle management functions
mem-pool: only search head block for available space
block alloc: add lifecycle APIs for cache_entry structs
read-cache: teach make_cache_entry to take object_id
read-cache: teach refresh_cache_entry to take istate
Junio C Hamano [Thu, 2 Aug 2018 22:30:43 +0000 (15:30 -0700)]
Merge branch 'jt/fetch-nego-tip'
"git fetch" learned a new option "--negotiation-tip" to limit the
set of commits it tells the other end as "have", to reduce wasted
bandwidth and cycles, which would be helpful when the receiving
repository has a lot of refs that have little to do with the
history at the remote it is fetching from.
* jt/fetch-nego-tip:
fetch-pack: support negotiation tip whitelist
Junio C Hamano [Thu, 2 Aug 2018 22:30:41 +0000 (15:30 -0700)]
Merge branch 'jt/fetch-pack-negotiator'
Code restructuring and a small fix to transport protocol v2 during
fetching.
* jt/fetch-pack-negotiator:
fetch-pack: introduce negotiator API
fetch-pack: move common check and marking together
fetch-pack: make negotiation-related vars local
fetch-pack: use ref adv. to prune "have" sent
fetch-pack: directly end negotiation if ACK ready
fetch-pack: clear marks before re-marking
fetch-pack: split up everything_local()
Junio C Hamano [Thu, 2 Aug 2018 22:30:41 +0000 (15:30 -0700)]
Merge branch 'ab/checkout-default-remote'
"git checkout" and "git worktree add" learned to honor
checkout.defaultRemote when auto-vivifying a local branch out of a
remote tracking branch in a repository with multiple remotes that
have tracking branches that share the same names.
* ab/checkout-default-remote:
checkout & worktree: introduce checkout.defaultRemote
checkout: add advice for ambiguous "checkout <branch>"
builtin/checkout.c: use "ret" variable for return
checkout: pass the "num_matches" up to callers
checkout.c: change "unique" member to "num_matches"
checkout.c: introduce an *_INIT macro
checkout.h: wrap the arguments to unique_tracking_name()
checkout tests: index should be clean after dwim checkout
Junio C Hamano [Thu, 2 Aug 2018 22:30:40 +0000 (15:30 -0700)]
Merge branch 'sb/diff-color-move-more'
"git diff --color-moved" feature has further been tweaked.
* sb/diff-color-move-more:
diff.c: offer config option to control ws handling in move detection
diff.c: add white space mode to move detection that allows indent changes
diff.c: factor advance_or_nullify out of mark_color_as_moved
diff.c: decouple white space treatment from move detection algorithm
diff.c: add a blocks mode for moved code detection
diff.c: adjust hash function signature to match hashmap expectation
diff.c: do not pass diff options as keydata to hashmap
t4015: avoid git as a pipe input
xdiff/xdiffi.c: remove unneeded function declarations
xdiff/xdiff.h: remove unused flags
Junio C Hamano [Thu, 2 Aug 2018 22:30:39 +0000 (15:30 -0700)]
Merge branch 'jk/fsck-gitmodules-gently'
Recent "security fix" to pay attention to contents of ".gitmodules"
while accepting "git push" was a bit overly strict than necessary,
which has been adjusted.
* jk/fsck-gitmodules-gently:
fsck: downgrade gitmodulesParse default to "info"
fsck: split ".gitmodules too large" error from parse failure
fsck: silence stderr when parsing .gitmodules
config: add options parameter to git_config_from_mem
config: add CONFIG_ERROR_SILENT handler
config: turn die_on_error into caller-facing enum
Junio C Hamano [Thu, 2 Aug 2018 22:30:39 +0000 (15:30 -0700)]
Merge branch 'bc/object-id'
Conversion from uchar[40] to struct object_id continues.
* bc/object-id:
pretty: switch hard-coded constants to the_hash_algo
sha1-file: convert constants to uses of the_hash_algo
log-tree: switch GIT_SHA1_HEXSZ to the_hash_algo->hexsz
diff: switch GIT_SHA1_HEXSZ to use the_hash_algo
builtin/merge-recursive: make hash independent
builtin/merge: switch to use the_hash_algo
builtin/fmt-merge-msg: make hash independent
builtin/update-index: simplify parsing of cacheinfo
builtin/update-index: convert to using the_hash_algo
refs/files-backend: use the_hash_algo for writing refs
sha1-name: use the_hash_algo when parsing object names
strbuf: allocate space with GIT_MAX_HEXSZ
commit: express tree entry constants in terms of the_hash_algo
hex: switch to using the_hash_algo
tree-walk: replace hard-coded constants with the_hash_algo
cache: update object ID functions for the_hash_algo
projects / thirdparty / git.git / log
