Jan Beulich [Fri, 28 Jul 2023 10:34:30 +0000 (12:34 +0200)]
gas: amend X_unsigned uses
PR gas/30688
X_unsigned being clear does not indicate a negative number; it merely
indicates a signed one (whose sign may still be clear). Amend two uses
by an actual value check.
Tsukasa OI [Wed, 26 Jul 2023 01:39:44 +0000 (01:39 +0000)]
RISC-V: Add actual 'Zvkt' extension support
The 'Zvkt' extension is listed on the added extensions in the GNU Binutils
version 2.41 (see binutils/NEWS). However, the support of this extension
was actually missing.
This commit adds actual support of this extension and adds implications
from 'Zvkn' and 'Zvks' superset extensions.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_implicit_subsets) Add implications from
'Zvkn' and 'Zvks'. (riscv_supported_std_z_ext): Add 'Zvkt' to
the supported extension list.
YunQiang Su [Fri, 28 Jul 2023 05:00:37 +0000 (06:00 +0100)]
MIPS: Support `-gnuabi64' target triplet suffix for 64-bit Linux targets
Make the n64 ABI the default for 64-bit Linux targets specified with
`-gnuabi64' suffix included in the target triplet, for configurations
such as the Debian mips64el and mips64r6el ports. Adjust testsuite
configuration accordingly.
There are the following regressions with the new target triplet:
The `readelf' issue comes from a difference in section headers produced
that the `binutils/testsuite/binutils-all/readelf.s-64' pattern template
does not match. While there has been a precedent it does not appear to
me that there is a clear advantage from adding more and more variations
to the template rather than forking the existing template into multiple
ones for a more exact match. So this is best deferred to a separate
discussion.
The MIPS reloc estimation issue is an actual bug in `objdump', which
discards a number of trailing entries from output here for n64 composed
relocations:
YunQiang Su [Fri, 28 Jul 2023 05:00:36 +0000 (06:00 +0100)]
MIPS/GAS/testsuite: Fix n64 compact EH failures
Expect a `.MIPS.options' section alternatively to `.reginfo' and ignore
contents of either as irrelevant for all the affected compact EH tests,
removing these regressions:
mips64-openbsd -FAIL: Compact EH EB #1 with personality ID and FDE data
mips64-openbsd -FAIL: Compact EH EB #2 with personality routine and FDE data
mips64-openbsd -FAIL: Compact EH EB #3 with personality id and large FDE data
mips64-openbsd -FAIL: Compact EH EB #4 with personality id, FDE data and LSDA
mips64-openbsd -FAIL: Compact EH EB #5 with personality routine, FDE data and LSDA
mips64-openbsd -FAIL: Compact EH EB #6 with personality id, LSDA and large FDE data
mips64-openbsd -FAIL: Compact EH EL #1 with personality ID and FDE data
mips64-openbsd -FAIL: Compact EH EL #2 with personality routine and FDE data
mips64-openbsd -FAIL: Compact EH EL #3 with personality id and large FDE data
mips64-openbsd -FAIL: Compact EH EL #4 with personality id, FDE data and LSDA
mips64-openbsd -FAIL: Compact EH EL #5 with personality routine, FDE data and LSDA
mips64-openbsd -FAIL: Compact EH EL #6 with personality id, LSDA and large FDE data
mips64el-openbsd -FAIL: Compact EH EB #1 with personality ID and FDE data
mips64el-openbsd -FAIL: Compact EH EB #2 with personality routine and FDE data
mips64el-openbsd -FAIL: Compact EH EB #3 with personality id and large FDE data
mips64el-openbsd -FAIL: Compact EH EB #4 with personality id, FDE data and LSDA
mips64el-openbsd -FAIL: Compact EH EB #5 with personality routine, FDE data and LSDA
mips64el-openbsd -FAIL: Compact EH EB #6 with personality id, LSDA and large FDE data
mips64el-openbsd -FAIL: Compact EH EL #1 with personality ID and FDE data
mips64el-openbsd -FAIL: Compact EH EL #2 with personality routine and FDE data
mips64el-openbsd -FAIL: Compact EH EL #3 with personality id and large FDE data
mips64el-openbsd -FAIL: Compact EH EL #4 with personality id, FDE data and LSDA
mips64el-openbsd -FAIL: Compact EH EL #5 with personality routine, FDE data and LSDA
mips64el-openbsd -FAIL: Compact EH EL #6 with personality id, LSDA and large FDE data
Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
gas/
* testsuite/gas/mips/compact-eh-eb-1.d: Accept `.MIPS.options'
section as an alternative to `.reginfo' and ignore contents of
either.
* testsuite/gas/mips/compact-eh-eb-2.d: Likewise.
* testsuite/gas/mips/compact-eh-eb-3.d: Likewise.
* testsuite/gas/mips/compact-eh-eb-4.d: Likewise.
* testsuite/gas/mips/compact-eh-eb-5.d: Likewise.
* testsuite/gas/mips/compact-eh-eb-6.d: Likewise.
* testsuite/gas/mips/compact-eh-el-1.d: Likewise.
* testsuite/gas/mips/compact-eh-el-2.d: Likewise.
* testsuite/gas/mips/compact-eh-el-3.d: Likewise.
* testsuite/gas/mips/compact-eh-el-4.d: Likewise.
* testsuite/gas/mips/compact-eh-el-5.d: Likewise.
* testsuite/gas/mips/compact-eh-el-6.d: Likewise.
MIPS n64 ABI has a peculiarity where all relocations are composed of
three, with subsequent relocation types set to R_MIPS_NONE if further
calculation is not required. Example output produced by `readelf' and
`objdump' for such relocations is:
respectively. The presence of these extra R_MIPS_NONE entries is not
relevant for generic or even some MIPS tests, so optionally match them
with the respective dump patterns, also discarding `xfail' annotation
for MIPS/OpenBSD targets from gas/elf/missing-build-notes.d, removing
these regressions:
YunQiang Su [Fri, 28 Jul 2023 05:00:36 +0000 (06:00 +0100)]
MIPS/testsuite: Handle 64-bit addresses
Several MIPS test cases are suitable for the n64 ABI if not for the
extra leading zeros or spaces in addresses not handled by dump patterns.
Match the characters then, removing these regressions:
ld/
* testsuite/ld-mips-elf/jaloverflow-2.d: Match extra leading
zeros and spaces with addresses as appropriate.
* testsuite/ld-mips-elf/jalx-1.d: Likewise.
* testsuite/ld-mips-elf/reloc-estimate-1.d: Likewise.
YunQiang Su [Fri, 28 Jul 2023 05:00:36 +0000 (06:00 +0100)]
testsuite: Also discard the `.MIPS.options' section
Also discard the `.MIPS.options' section, used with n64 MIPS binaries,
along with similar other MIPS sections (`.reginfo', `.MIPS.abiflags')
not relevant for the test cases concerned, fixing these regressions:
MIPS/LD/testsuite: Fix MIPS16 interlinking test IRIX 6 regressions
IRIX 6 does not have MIPS16 stub section support in its n32 linker
scripts, causing such input sections to be propagated to the respective
output sections rather than `.text', causing dump pattern mismatches.
Expect IRIX 6 to fail with n32 testing then, removing this regression:
mips-sgi-irix6 -FAIL: MIPS16 interlinking for local functions 1 (n32)
We may choose to update IRIX 6 n32 linker scripts sometime, as it seems
a harmless change.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Expect IRIX 6 to fail with
n32 `mips16-local-stubs-1' testing.
YunQiang Su [Fri, 28 Jul 2023 05:00:36 +0000 (06:00 +0100)]
MIPS/LD/testsuite: Fix MIPS16 interlinking test n64 regressions
The MIPS16 interlinking test for local functions expects to be assembled
with 32-bit addressing, otherwise causing assembly warnings:
.../ld/testsuite/ld-mips-elf/mips16-local-stubs-1.s: Assembler messages:
.../ld/testsuite/ld-mips-elf/mips16-local-stubs-1.s:16: Warning: la used to load 64-bit address; recommend using dla instead
Use the per-ABI framework then to run the test explicitly for o32 and
n32 ABIs only, replacing the `-mips4' option from the `as' tag with
`.module mips4' pseudo-op within the source itself so as to avoid
assembly errors:
Assembler messages:
Error: -mips4 conflicts with the other architecture options, which imply -mips3
with n32 testing for some targets, and ultimately removing these
regressions:
mips64-openbsd -FAIL: MIPS16 interlinking for local functions 1
mips64el-openbsd -FAIL: MIPS16 interlinking for local functions 1
Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
ld/
* testsuite/ld-mips-elf/mips16-local-stubs-1.d: Remove `-mips4'
from the `as' tag.
* testsuite/ld-mips-elf/mips16-local-stubs-1.s: Add `.module
mips4'.
* testsuite/ld-mips-elf/mips-elf.exp: Run `mips16-local-stubs-1'
for o32 and n32 ABIs only.
YunQiang Su [Fri, 28 Jul 2023 05:00:36 +0000 (06:00 +0100)]
MIPS/GAS/testsuite: Force o32 for tests expecting 32-bit addressing
A few GAS tests expect to be assembled with 32-bit addressing, otherwise
causing an assembly warning:
.../gas/testsuite/gas/mips/fix-rm7000-2.s:11: Warning: la used to load 64-bit address; recommend using dla instead
or pattern dump mismatches against 32-bit address calculations, however
these tests do not enforce their expectation in any. For none of them
the specific ABI used is of any relevance however, so select the o32 ABI
unconditionally, removing these failures with OpenBSD targets:
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (micromips)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips3)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips4)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips5)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r2)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r3)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r5)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon2)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon3)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeonp)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (r4000)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (sb1)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (vr5400)
mips64-openbsd -FAIL: MIPS RM7000 workarounds test 2 (xlr)
mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon2)
mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon3)
mips64-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeonp)
mips64-openbsd -FAIL: Full MIPS R5900
mips64-openbsd -FAIL: MIPS R5900 VU0
mips64-openbsd -FAIL: Paired LL/SC for mips64r6 (mips64r6)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (micromips)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips3)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips4)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips5)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r2)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r3)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (mips64r5)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon2)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeon3)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (octeonp)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (r4000)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (sb1)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (vr5400)
mips64el-openbsd -FAIL: MIPS RM7000 workarounds test 2 (xlr)
mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon2)
mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeon3)
mips64el-openbsd -FAIL: MIPS-OCTEON octeon_saa_saad (octeonp)
mips64el-openbsd -FAIL: Full MIPS R5900
mips64el-openbsd -FAIL: MIPS R5900 VU0
mips64el-openbsd -FAIL: Paired LL/SC for mips64r6 (mips64r6)
Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
gas/
* testsuite/gas/mips/fix-rm7000-2.d: Add `-32' to the `as' tag.
* testsuite/gas/mips/micromips@fix-rm7000-2.d: Likewise.
* testsuite/gas/mips/r5900-full.d: Likewise.
* testsuite/gas/mips/r5900-vu0.d: Likewise.
* testsuite/gas/mips/llpscp-64.d: Add `as' tag with `-32'.
* testsuite/gas/mips/octeon-saa-saad.d: Likewise.
MIPS/LD/testsuite: Run `got-dump-1' for o32/n32 ABIs
The `got-dump-1' test case uses 32-bit addressing, so it makes no sense
to run it with the n64 ABI. And there is a corresponding `got-dump-2'
test already for the n64 ABI.
Use the per-ABI framework then to run the `got-dump-1' test explicitly
for o32 and n32 ABIs only.
ld/
* testsuite/ld-mips-elf/mips-elf.exp: Run `got-dump-1' for o32
and n32 ABIs only.
MIPS/LD/testsuite: Fix `attr-gnu-4-10' failures with OpenBSD targets
OpenBSD targets produce ELF64 files while the pattern dump expects ELF32
output and specific header sizes. Disable it for `mips64*-*-openbsd*'
for these targets then, removing these failures:
MIPS/LD/testsuite: Fix `attr-gnu-4-10' failures with IRIX targets
IRIX targets do not enable the production of a `.pdr' section in GAS by
default, which causes a failure with the `attr-gnu-4-10' test case due
to a difference resulting in the number and indices of sections produced
in linker output.
As the presence or absence of this section is not relevant to this test
case, just enable it unconditionally, fixing these regressions:
MIPS/LD/testsuite: Fix JALR relaxation test failure with IRIX 6
The `mips-sgi-irix6' target only supports IRIX linker emulations, but
most JALR relaxation tests request the relevant traditional emulation
instead, causing a link failure:
This is clearly an omission from the conversion to use the per-ABI
framework made with commit 78da84f99405 ("MIPS/LD/testsuite: Correct
mips-elf.exp test ABI/emul/endian arrangement"). These tests are also
endianness agnostic, which was missed in the conversion as well.
Remove the unnecessary explicit ABI and endianness options then and rely
on the per-ABI framework to get things right, removing this regression:
mips-sgi-irix6 -FAIL: MIPS relax-jalr-shared n32
ld/
* testsuite/ld-mips-elf/relax-jalr-n32-shared.d: Remove flags
related to ABI and endianness selection from the `as' and `ld'
tags.
* testsuite/ld-mips-elf/relax-jalr-n64.d: Likewise.
* testsuite/ld-mips-elf/relax-jalr-n64-shared.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Remove `as' and `ld' tag
additions from the invocation of JALR relaxation tests.
MIPS/LD/testsuite: Fix unaligned JALX failures with OpenBSD targets
There are only n64 linker emulations included with `mips64*-*-openbsd*'
targets, however the unaligned JALX tests insist on running across all
targets and force the n32 ABI, causing link errors with the targets
concerned, e.g.:
./ld-new: tmpdir/unaligned-jalx-0.o: ABI is incompatible with that of the selected emulation
./ld-new: failed to merge target specific data of file tmpdir/unaligned-jalx-0.o
./ld-new: tmpdir/unaligned-insn.o: ABI is incompatible with that of the selected emulation
./ld-new: failed to merge target specific data of file tmpdir/unaligned-insn.o
Convert the tests then to use the per-ABI framework and run them for the
o32 and n32 ABIs, removing these regressions:
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 0
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 1
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 2
mips64-openbsd -FAIL: MIPS JALX to unaligned symbol 3
mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0
mips64-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1
mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 0
mips64-openbsd -FAIL: microMIPS JALX to unaligned symbol 1
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 0
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 1
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 2
mips64el-openbsd -FAIL: MIPS JALX to unaligned symbol 3
mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 0
mips64el-openbsd -FAIL: MIPS16 JALX to unaligned symbol 1
mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 0
mips64el-openbsd -FAIL: microMIPS JALX to unaligned symbol 1
Similar tests for the n64 ABI can be added separately, using suitable
dump patterns.
ld/
* testsuite/ld-mips-elf/unaligned-jalx-0.d: Remove `-32' from
the `as' tag.
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-0.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-0.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/mips-elf.exp: Run unaligned JALX tests
with `run_dump_test_o32' and `run_dump_test_n32' rather than
`run_dump_test'.
MIPS/GAS/testsuite: Disable compact EH #7 tests with OpenBSD targets
Compact EH #7 tests use output templates that are not suitable for the
n64 ABI, which `mips64*-*-openbsd*' targets use by default, because the
contents of the sections examined are expected to be differnt. Disable
the tests then, removing these regressions:
mips64-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE
mips64-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE
mips64el-openbsd -FAIL: Compact EH EB #7 with personality id and fallback FDE
mips64el-openbsd -FAIL: Compact EH EL #7 with personality id and fallback FDE
Suitable corresponding tests for the n64 ABI can be added separately.
gas/
* testsuite/gas/mips/compact-eh-eb-7.d: Exclude for
`mips64*-*-openbsd*'.
* testsuite/gas/mips/compact-eh-el-7.d: Likewise.
YunQiang Su [Fri, 28 Jul 2023 05:00:36 +0000 (06:00 +0100)]
MIPS/LD: Include n64 `.interp' with INITIAL_READONLY_SECTIONS
In ld/emulparams/elf64bmip-defs.sh there is no explicit handling of the
`.interp' section, which causes it to be positioned in output at an odd
place.
Let's include it with INITIAL_READONLY_SECTIONS, just like o32/n32 do,
fixing a regression from commit 5a8e7be242f3 ("INITIAL_READONLY_SECTIONS
in elf.sc"), where the handling of n64 was missed due to an unfortunate
sequence of events where ld/emulparams/elf64bmip-defs.sh was only added
with commit 94bb04b3c611 ("Use .reginfo rather than .MIPS.options in n32
linker scripts") the day before.
Add test cases covering section ordering across the three ABIs. This
change also fixes ld/pr23658-2:
FAIL: Build pr23658-2
Co-Authored-By: Maciej W. Rozycki <macro@orcam.me.uk>
ld/ChangeLog:
* emulparams/elf64bmip-defs.sh: Include `.interp' with
INITIAL_READONLY_SECTIONS.
* testsuite/ld-mips-elf/pie-n64.d: Adjust addresses.
* testsuite/ld-mips-elf/sections-1-o32.rd: New test.
* testsuite/ld-mips-elf/sections-1-o32t.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32t.rd: New test.
* testsuite/ld-mips-elf/sections-1-n32p.rd: New test.
* testsuite/ld-mips-elf/sections-1-n64.rd: New test.
* testsuite/ld-mips-elf/sections-1-n64t.rd: New test.
* testsuite/ld-mips-elf/sections-2-o32.rd: New test.
* testsuite/ld-mips-elf/sections-2-o32t.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32t.rd: New test.
* testsuite/ld-mips-elf/sections-2-n32p.rd: New test.
* testsuite/ld-mips-elf/sections-2-n64.rd: New test.
* testsuite/ld-mips-elf/sections-2-n64t.rd: New test.
* testsuite/ld-mips-elf/sections.s: New test source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.
Revert "MIPS: support mips*64 as CPU and gnuabi64 as ABI"
This reverts commit 32f1c80375ebe8ad25d9805ee5889f0006c51e59. It had
two unrelated changes lumped together, one of which changed the meaning
of the `mipsisa64*-*-linux*' target triplets, which was not properly
evaluated.
Alan Modra [Wed, 19 Jul 2023 00:56:04 +0000 (10:26 +0930)]
[GOLD, PowerPC64] Debug info relocation overflow
It is possible to build huge binaries on powerpc64, where 32-bit
addresses in debug info are insufficient to descibe locations in the
binary. Help out the user, and only warn about debug overflows.
* powerpc.cc (Target_powerpc::Relocate::relocate): Warn on
relocation overflows in debug info.
Alan Modra [Sat, 15 Jul 2023 10:17:10 +0000 (19:47 +0930)]
PR10957, Missing option to really print section+offset
Many of the reloc error messages have already been converted from
using %C to using %H in ld.bfd, to print section+offset as well as
file/line/function. This catches a few remaining, and changes gold to
do the same.
Alan Modra [Thu, 13 Jul 2023 04:02:42 +0000 (13:32 +0930)]
elf_object_p load of dynamic symbols
This fixes an uninitialised memory access on a fuzzed file:
0 0xf22e9b in offset_from_vma /src/binutils-gdb/bfd/elf.c:1899:2
1 0xf1e90f in _bfd_elf_get_dynamic_symbols /src/binutils-gdb/bfd/elf.c:2099:13
2 0x10e6a54 in bfd_elf32_object_p /src/binutils-gdb/bfd/elfcode.h:851:9
Hopefully it will also stop any attempt to load dynamic symbols from
eu-strip debug files.
* elfcode.h (elf_object_p): Do not attempt to load dynamic
symbols for a file with no section headers until all the
program headers are swapped in. Do not fail on eu-strip debug
files.
gprofng: 30602 [2.41] gprofng test hangs on i686-linux-gnu
There were several problems in the gprofng testing:
- we did not catch a timeout for each test.
- we used exit() to stop a failed test. But this stops all other tests.
- we used a time_t (long) type in smalltest.c instead of a long long type.
PR gprofng/30602
* configure.ac: Launch only native testing.
* configure: Rebuild.
* testsuite/config/default.exp: Set TEST_TIMEOUT.
* testsuite/gprofng.display/setpath_map.exp: Use return instead of exit.
* testsuite/gprofng.display/gp-archive.exp: Likewise.
* testsuite/gprofng.display/gp-collect-app_F.exp: Likewise.
* testsuite/gprofng.display/display.exp: Delete an unnecessary test
for native testing.
* testsuite/lib/display-lib.exp (run_native_host_cmd): Add timeout.
* testsuite/lib/smalltest.c: Use a long long type instead of time_t.
Alan Modra [Mon, 10 Jul 2023 22:49:20 +0000 (08:19 +0930)]
Re: Keeping track of rs6000-coff archive element pointers
bfd/
* coff-rs6000.c (add_range): Revise comment, noting possible fail.
(_bfd_xcoff_openr_next_archived_file): Start with clean ranges.
binutils/
* bfdtest1.c: Enhance to catch errors on second scan.
Alan Modra [Wed, 5 Jul 2023 13:53:51 +0000 (23:23 +0930)]
Use run_host_cmd to run $CC and other no-section-header test fixes
We should be using run_host_cmd everywhere we invoke a compiler in the
ld testsuite, if we want to use ld/ld-new just built. run_host_cmd
properly inserts $gcc_B_opt in cases where a user wants to test
binutils with a newly built compiler, ie. when $CC specifies -B itself.
Also, it is not good practice to exclude tests when non-native except
of course those tests that run a target binary. Compiling and linking
often shows up problems.
* testsuite/ld-elf/no-section-header.exp (binutils_run_test):
Use run_host_cmd to invoke $CC_FOR_TARGET. Run all tests
non-native too, except for attempting to run the binaries.
Run tests for ELF in general, not just linux.
* testsuite/ld-elf/pr25617-1-no-sec-hdr.rd: Allow localentry
symbol decoration, and support either sorting of symbols.
* testsuite/ld-elf/pr25617-1a-no-sec-hdr.rd: Likewise.
* testsuite/ld-elf/pr25617-1a-sec-hdr.rd: Likewise.
* testsuite/ld-elf/pr25617-1a-no-sec-hdr.nd: Accept D function syms.
* testsuite/ld-elf/start-shared-noheader-sysv.rd: Accept
mips-sgi-irix symbol output.
* testsuite/ld-elf/start-shared-noheader.nd: Likewise.
YunQiang Su [Fri, 30 Jun 2023 05:14:51 +0000 (13:14 +0800)]
ld: Use [list ] syntax to define run_tests in indirect.exp
Currently, the var run_tests is defined by syntax {{}},
while in this case, variables cannot be used.
Thus $NOPIE_CFLAGS and $NOPIE_LDFLAGS are passed to cmd as names
instead of values:
gcc ... $NOPIE_CFLAGS -c .../indirect5a.c -o tmpdir/indirect5a.o
Let's use [list [list ]] syntax instead.
ld/ChangeLog:
* testsuite/ld-elf/indirect.exp(run_tests): use [list [list]]
syntax instead of {{}}.
YunQiang Su [Mon, 3 Jul 2023 04:43:21 +0000 (12:43 +0800)]
ld: fix plugin tests for MIPS PIC
On MIPS, for PIC objects, symbols may reference 2 times:
once from the caller, and once from GOT.
Thus ld may complains 2 times about "undefined reference".
So we add a new "#?" line to every effected testsuite.
WANG Xuerui [Sun, 2 Jul 2023 10:14:22 +0000 (18:14 +0800)]
LoongArch: gas: Fix shared builds
Formerly an include of libbfd.h was added in commit 56576f4a722
("LoongArch: gas: Add support for linker relaxation."), in order to
allow calling _bfd_read_unsigned_leb128 from gas, but doing so broke
shared builds. Commit d2fddb6d783 fixed this reference but did not
remove the now unnecessary inclusion of libbfd.h. The gas_assert macro
expands into a conditional call to abort(), but "abort" is re-defined to
_bfd_abort in libbfd.h, so the extra include breaks any gas_assert
usage, and should be removed.
gas/ChangeLog:
* config/tc-loongarch.c: Don't include libbfd.h.
Fixes: d2fddb6d783 ("LoongArch: Fix ld "undefined reference" error with --enable-shared") Signed-off-by: WANG Xuerui <git@xen0n.name>
In our GUI project (https://savannah.gnu.org/projects/gprofng-gui), we use
the output of gprofng to display the data. Sometimes this data is corrupted.
gprofng/ChangeLog
2023-06-29 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
* src/ipc.cc (ipc_doWork): Fix data race.
* src/ipcio.cc (IPCresponse::print): Fix data race.
Remove unused variables and functions.
* src/ipcio.h: Declare two variables.
* src/StringBuilder.cc (StringBuilder::write): New function.
* src/StringBuilder.h: Likewise.
Certain extensions require two levels of implications. For example,
zvkng implies zvkn and zvkn implies zvkned. Enabling zvkng should also
enable zvkned.
This patch fixes this behavior.
bfd/ChangeLog:
* elfxx-riscv.c (riscv_parse_add_implicit_subsets): Allow nested
implications for extensions.
Signed-off-by: Nathan Huckleberry <nhuck@google.com> Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
This extension adds the following instructions:
- vandn.[vv,vx]
- vbrev.v
- vbrev8.v
- vrev8.v
- vclz.v
- vctz.v
- vcpop.v
- vrol.[vv,vx]
- vror.[vv,vx,vi]
- vwsll.[vv,vx,vi]
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for Zvbb.
(riscv_multi_subset_supports_ext): Likewise.
gas/ChangeLog:
* config/tc-riscv.c (validate_riscv_insn): Add 'l' as new format
string directive.
(riscv_ip): Likewise.
* testsuite/gas/riscv/zvbb.d: New test.
* testsuite/gas/riscv/zvbb.s: New test.
Tom Tromey [Fri, 30 Jun 2023 01:38:10 +0000 (19:38 -0600)]
Fix regressions caused by agent expression C++-ification
Simon pointed out that my agent expression C++-ification patches
caused a regression with the native-gdbserver target board. The bug
is that append_const is supposed to write in big-endian order, but I
switched this by mistake.
Philipp Tomsich [Fri, 30 Jun 2023 14:02:11 +0000 (16:02 +0200)]
binutils: NEWS: announce new RISC-V extensions
We picked up support for a few new extensions over the last weeks
(this may need further updating prior to the next release), list them
in the NEWS file.
binutils/ChangeLog:
* binutils/NEWS: announce suuport for the new RISC-V
extensions (Zicond, Zfa, XVentanaCondOps).
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
This patch adds support for the RISC-V Zfa extension,
which introduces additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of FP registers in case XLEN < FLEN
* fleq/fltq (quiet comparison instructions)
Zfa defines its instructions in combination with the following
extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
This patch is based on an earlier version from Tsukasa OI:
https://sourceware.org/pipermail/binutils/2022-September/122939.html
Most significant change to that commit is the switch from the rs1-field
value to the actual floating-point value in the last operand of the fli*
instructions. Everything that strtof() can parse is accepted and
the '%a' printf specifier is used to output hex floating-point literals
in the disassembly.
The Zfa specification is frozen (and has passed public review). It is
available as a chapter in "The RISC-V Instruction Set Manual: Volume 1":
https://github.com/riscv/riscv-isa-manual/releases
bfd/ChangeLog:
* elfxx-riscv.c (riscv_multi_subset_supports): Add instruction
class support for 'Zfa' extension.
(riscv_multi_subset_supports_ext): Likewise.
(riscv_implicit_subsets): Add 'Zfa' -> 'F' dependency.
gas/ChangeLog:
* config/tc-riscv.c (flt_lookup): New helper to lookup a float value
in an array.
(validate_riscv_insn): Add 'Wfv' as new format string directive.
(riscv_ip): Likewise.
* doc/c-riscv.texi: Add floating-point chapter and describe
limiations of the Zfa FP literal parsing.
* testsuite/gas/riscv/zfa-32.d: New test.
* testsuite/gas/riscv/zfa-32.s: New test.
* testsuite/gas/riscv/zfa-64.d: New test.
* testsuite/gas/riscv/zfa-64.s: New test.
* testsuite/gas/riscv/zfa-fail.d: New test.
* testsuite/gas/riscv/zfa-fail.l: New test.
* testsuite/gas/riscv/zfa-fail.s: New test.
* testsuite/gas/riscv/zfa.d: New test.
* testsuite/gas/riscv/zfa.s: New test.
* testsuite/gas/riscv/zfa.s: New test.
projects / thirdparty / binutils-gdb.git / log
