Michael Tremer [Wed, 15 Jan 2025 11:18:23 +0000 (11:18 +0000)]
openssl: Dynamically link zlib
The former way was to open libz.so whenever it was needed. This is
however not a very good solution and we will have trouble in dependency
tracking and discover any linking problems much later.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 9 Jan 2025 15:08:22 +0000 (15:08 +0000)]
kernel: Strip modules
The kernel does not strip modules by default. This can be enabled by
passing INSTALL_MOD_STRIP=1 when installing the modules.
Since we are not actually building the kernel with debuginfo and we are
comressing the modules afterwards, there is not a huge saving on disk
space, but there is a small saving of memory when loading the modules.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Wed, 8 Jan 2025 12:18:54 +0000 (13:18 +0100)]
fr.pl: Additional update to French translations for the optionsfw.cgi page
Reported-by: Phil SCAR <p27m@orange.fr> Fixes: Bug13800 Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 6 Jan 2025 13:52:26 +0000 (14:52 +0100)]
speedtest-cli: Fix for bug13805 - error message if run on hour or half hour
- Created a self consistent patch set out of four patches on the speedtest-cli
github site. Slight changes needed in each to allow them to be successfully applied
in sequence.
- Additional comments added to top of the various patches.
- Tested out this modified package on my vm testbed and it fixes the bug of
speedtest-cli giving an error message if run on the hour or on the half hour. I
tested it out with the original system first and it failed with the error message
for 7 half hour tests. With this modified version it ran for 9 half hour slots with
no problems at all. Tested with the command being run via fcrontab.
- None of these patches have ben merged by the speedtest-cli github owner as the last
commit was July 2021 and the patches were proposed in Feb 2023. There has been no
resposne to anything on the speedtest-cli github site by the owner.
- I have reviewed all the patches and the content looks fine to me with no concerns
from a security point of view although it would be good to get feedback from
alternative eyes.
- Update of rootfile not required.
Fixes: Bug13805 Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Tested-by: Bernhard Bitsch <bbitsch@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Sat, 21 Dec 2024 12:55:39 +0000 (13:55 +0100)]
clamav: Update to version 1.4.1
- Update from version 1.3.2 to 1.4.1
- Update of rootfile
- Changelog
1.4.1
ClamAV 1.4.1 is a critical patch release with the following fixes:
- [CVE-2024-20506](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-20506):
Changed the logging module to disable following symlinks on Linux and Unix
systems so as to prevent an attacker with existing access to the 'clamd' or
'freshclam' services from using a symlink to corrupt system files.
This issue affects all currently supported versions. It will be fixed in:
- 1.4.1
- 1.3.2
- 1.0.7
- 0.103.12
Thank you to Detlef for identifying this issue.
- [CVE-2024-20505](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-20505):
Fixed a possible out-of-bounds read bug in the PDF file parser that could
cause a denial-of-service (DoS) condition.
This issue affects all currently supported versions. It will be fixed in:
- 1.4.1
- 1.3.2
- 1.0.7
- 0.103.12
Thank you to OSS-Fuzz for identifying this issue.
- Removed unused Python modules from freshclam tests including deprecated
'cgi' module that is expected to cause test failures in Python 3.13.
1.4.0
Major changes
- Added support for extracting ALZ archives.
The new ClamAV file type for ALZ archives is `CL_TYPE_ALZ`.
Added a [DCONF](https://docs.clamav.net/manual/Signatures/DynamicConfig.html)
option to enable or disable ALZ archive support.
> _Tip_: DCONF (Dynamic CONFiguration) is a feature that allows for some
> configuration changes to be made via ClamAV `.cfg` "signatures".
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1183)
- Added support for extracting LHA/LZH archives.
The new ClamAV file type for LHA/LZH archives is `CL_TYPE_LHA_LZH`.
Added a [DCONF](https://docs.clamav.net/manual/Signatures/DynamicConfig.html)
option to enable or disable LHA/LZH archive support.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1192)
- Added the ability to disable image fuzzy hashing, if needed. For context,
image fuzzy hashing is a detection mechanism useful for identifying malware
by matching images included with the malware or phishing email/document.
New ClamScan options:
```
--scan-image[=yes(*)/no]
--scan-image-fuzzy-hash[=yes(*)/no]
```
New ClamD config options:
```
ScanImage yes(*)/no
ScanImageFuzzyHash yes(*)/no
```
New libclamav scan options:
```c
options.parse &= ~CL_SCAN_PARSE_IMAGE;
options.parse &= ~CL_SCAN_PARSE_IMAGE_FUZZY_HASH;
```
Added a [DCONF](https://docs.clamav.net/manual/Signatures/DynamicConfig.html)
option to enable or disable image fuzzy hashing support.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1186)
Other improvements
- Added cross-compiling instructions for targeting ARM64/aarch64 processors for
[Windows](https://github.com/Cisco-Talos/clamav/blob/main/INSTALL-cross-windows-arm64.md)
and
[Linux](https://github.com/Cisco-Talos/clamav/blob/main/INSTALL-cross-linux-arm64.md).
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1116)
- Improved the Freshclam warning messages when being blocked or rate limited
so as to include the Cloudflare Ray ID, which helps with issue triage.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1195)
- Removed unnecessary memory allocation checks when the size to be allocated
is fixed or comes from a trusted source.
We also renamed internal memory allocation functions and macros, so it is
more obvious what each function does.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1137)
- Improved the Freshclam documentation to make it clear that the `--datadir`
option must be an absolute path to a directory that already exists, is
writable by Freshclam, and is readable by ClamScan and ClamD.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1199)
- Added an optimization to avoid calculating the file hash if the clean file
cache has been disabled. The file hash may still be calculated as needed to
perform hash-based signature matching if any hash-based signatures exist that
target a file of the same size, or if any hash-based signatures exist that
target "any" file size.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1167)
- Added an improvement to the SystemD service file for ClamOnAcc so that the
service will shut down faster on some systems.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1164)
- Added a CMake build dependency on the version map files so that the build
will re-run if changes are made to the version map files.
Work courtesy of Sebastian Andrzej Siewior.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1294)
- Added an improvement to the CMake build so that the RUSTFLAGS settings
are inherited from the environment.
Work courtesy of liushuyu.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1301)
Bug fixes
- Silenced confusing warning message when scanning some HTML files.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1252)
- Fixed minor compiler warnings.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1197)
- Since the build system changed from Autotools to CMake, ClamAV no longer
supports building with configurations where bzip2, libxml2, libz, libjson-c,
or libpcre2 are not available. Libpcre is no longer supported in favor of
libpcre2. In this release, we removed all the dead code associated with those
unsupported build configurations.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1217)
- Fixed assorted typos. Patch courtesy of RainRat.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1228)
- Added missing documentation for the ClamScan `--force-to-disk` option.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1186)
- Fixed an issue where ClamAV unit tests would prefer an older
libclamunrar_iface library from the install path, if present, rather than
the recently compiled library in the build path.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1258)
- Fixed a build issue on Windows with newer versions of Rust.
Also upgraded GitHub Actions imports to fix CI failures.
Fixes courtesy of liushuyu.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1307)
- Fixed an unaligned pointer dereference issue on select architectures.
Fix courtesy of Sebastian Andrzej Siewior.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1293)
- Fixed a bug that prevented loading plaintext (non-CVD) signature files
when using the `--fail-if-cvd-older-than=DAYS` / `FailIfCvdOlderThan` option.
Fix courtesy of Bark.
- [GitHub pull request](https://github.com/Cisco-Talos/clamav/pull/1309)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Sat, 21 Dec 2024 12:55:08 +0000 (13:55 +0100)]
rust: Update to version 1.83.0
- Update from version 1.67.0 to 1.83.0
- Update x86_64, aarch64 & riscv64 rootfiles
- This version of rust hasd the fix to ensure that ruby builds okay with aarch64 &
riscv64. This required a fix to be applied to the LLVM and then for the updated
LLVM to be built into rust. That has occurred with this version.
- Tested out the build on aarch64 and riscv64 and confirmed that ruby built without
any problems with this version of rust.
- The update of rust required a range of updates of other rust crates plus the
inclusion of new crates and the pinning of some crates to older versions. This patch
set includes all the rust crate changes.
- The download-rust-crate script results in source tarballs that have a Cargo.toml.orig
file included in them. This is not allowed in the rust building so the rust-rand file
which is used as a template for the rust crate script has been modified to remove
this .orig file so that the build can complete.
- With this updated version of rust the clamav addon can also now be updated and so is
also included in this patch set.
- There are 29 rust crate changes.
- Changelog is too large to include here. Details can be found at
https://releases.rs/docs/
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:17 +0000 (18:51 +0200)]
samba: Modification to disable cups for samba build and install
- As discussed at IPFire conf call on 7th Oct
- disable cups for the samba configure stage
- Update of rootfiles
- Update of samba.cgi to remove the printing of a printer share into the samba
configuration file.
- Tested out on vm system. Installed samba with only avahi, perl-Parse-Yapp, perl-JSON
and wsdd as dependencies. Installed without any problems. Existing share was able
to be accessed without any problems and a new share was created and was also able
to be accessed without problems.
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:16 +0000 (18:51 +0200)]
perl-Imager: Removal of all tiff related lines in rootfile
- With removal of libtiff, the perl-Imager rootfile has to have tiff related lines
removed.
- perl-Imager works without the tiff lines in place. Only no tiff images will be able
to be processed by perl-Imager but that is not required for its use in IPFire.
- Tested out creating an OpenVPN connection with OTP enabled and the OTP QR code was
produced and able to be viewed.
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:15 +0000 (18:51 +0200)]
make.sh: All removed packages removed from make.sh
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:14 +0000 (18:51 +0200)]
qpdf: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:13 +0000 (18:51 +0200)]
poppler-data: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:12 +0000 (18:51 +0200)]
poppler: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:11 +0000 (18:51 +0200)]
openjpeg: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:10 +0000 (18:51 +0200)]
libtiff: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:09 +0000 (18:51 +0200)]
lcms2: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:08 +0000 (18:51 +0200)]
hplip: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:07 +0000 (18:51 +0200)]
gutenprint: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:06 +0000 (18:51 +0200)]
ghostscript: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:05 +0000 (18:51 +0200)]
foomatic: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:04 +0000 (18:51 +0200)]
epson-inkjet-printer-escpr: Removal of package
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:03 +0000 (18:51 +0200)]
cups-pdf: Removal of cups-pdf
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:02 +0000 (18:51 +0200)]
cups-filters: Removal of cups-filters
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Mon, 14 Oct 2024 16:51:01 +0000 (18:51 +0200)]
cups: Removal of cups and associated packages
- As discussed at IPFire conf call on 7th Oct
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Adolf Belka [Thu, 2 Jan 2025 16:29:26 +0000 (17:29 +0100)]
miniupnpc: revert the addition of this package due to transmission reversion
- As transmission has been reverted back to version 4.0.5 then miniupnpc is no longer
needed for building or runtime.
- This removes the minupnpc lfs and rootfile files. It also removes miniupnpc from
the make.sh file.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Thu, 2 Jan 2025 16:29:25 +0000 (17:29 +0100)]
transmission: revert version back to 4.0.5
- Revert back from 4.0.6 to 4.0.5 due to a bug in 4.0.6 that has resulted in a variety
of torrent mirrors banning transmission-4.0.6
- The update from 4.0.5 to 4.0.6 did not have any security fixes in it so there is no
issue in moving backward to 4.0.5
- A fix has been created but it is unclear when (and if) version 4.0.7 will be released.
The fix has also been included in version 4.1.0 but this is still in beta development
form.
- Version 4.0.6 required minupnpc for building and run time. This reversion is also
removing miniupnpc in an associated patch in this patch set.
- No change required in the rootfile.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Peter Müller [Fri, 27 Dec 2024 09:10:00 +0000 (09:10 +0000)]
Tor: Update to 0.4.8.13
Full changelog according to
https://gitlab.torproject.org/tpo/core/tor/-/blob/tor-0.4.8.13/ChangeLog :
Changes in version 0.4.8.13 - 2024-10-24
This is minor release fixing an important client circuit building (Conflux
related) bug which lead to performance degradation and extra load on the
network. Some minor memory leaks fixes as well as an important minor feature
for pluggable transports. We strongly recommend to update as soon as possible
for clients in order to neutralize this conflux bug.
o Major bugfixes (circuit building):
- Conflux circuit building was ignoring the "predicted ports"
feature, which aims to make Tor stop building circuits if there
have been no user requests lately. This bug led to every idle Tor
on the network building and discarding circuits every 30 seconds,
which added overall load to the network, used bandwidth and
battery from clients that weren't actively using their Tor, and
kept sockets open on guards which added connection padding
essentially forever. Fixes bug 40981; bugfix on 0.4.8.1-alpha;
o Minor feature (bridges, pluggable transport):
- Add STATUS TYPE=version handler for Pluggable Transport. This
allows us to gather version statistics on Pluggable Transport
usage from bridge servers on our metrics portal. Closes
ticket 11101.
o Minor features (fallbackdir):
- Regenerate fallback directories generated on October 24, 2024.
o Minor features (geoip data):
- Update the geoip files to match the IPFire Location Database, as
retrieved on 2024/10/24.
o Minor bugfixes (memleak, authority):
- Fix a small memleak when computing a new consensus. This only
affects directory authorities. Fixes bug 40966; bugfix
on 0.3.5.1-alpha.
o Minor bugfixes (memory):
- Fix memory leaks of the CPU worker code during shutdown. Fixes bug
833; bugfix on 0.3.5.1-alpha.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
projects / people / ms / ipfire-2.x.git / log
