Michael Tremer [Thu, 8 Sep 2022 20:35:47 +0000 (22:35 +0200)]
network: Assign "static" MAC addresses to QMI interfaces
This is really badly hacky, but I do not know a better way to solve this
with our existing "setup" program which would be a nightmare to extend.
So we are using the device number to generate a static MAC address which
can then be used as usual. I doubt many people will have more than one
device.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2022 15:05:08 +0000 (17:05 +0200)]
network: dhcpcd fails to check link state for QMI interfaces
When acquiring an IP address, dhcpcd seems to think that the interface
is down or does not work properly for some reason. It will
subsequentially decide to exit which is not what we want here.
Therefore this patch tells dhcpcd to ignore the link state and keep
happily running.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Thu, 8 Sep 2022 10:38:45 +0000 (12:38 +0200)]
dhcpcd.exe: Run everything no matter how RED is configured
This could potentially create problems when we abuse these functions to
launch the DHCP client on IPTV interfaces. This would have to be tested
and confirmed or potentially we would need some more changes to keep
supporting that use-case, too.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Wed, 7 Sep 2022 15:55:40 +0000 (17:55 +0200)]
network: Add support for QMI modems
QMI is a proprietary interface from Qualcomm which are absolute pioneers
when it comes to interfacing with modems. I don't think there would be
any way to make this any more complicated and bloated.
So, bascially we will put the modem into a raw IP mode which changes the
interface into Point-to-Point mode.
We then configure the provider settings using qmicli. After that, the
modem will try to connect to the provider and obtain an IP address.
We will then start a DHCP client which does not do any DHCP-ing because
implementing that would be too complicated. Instead we do something even
*more* complicated where we would launch a custom script which asks the
modem for the allocated IP address and will configure it into the
device. The DHCP client then reads that IP address from the device and
pretends it came up with it by itself. Such an easy way to do this.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
For details see:
https://www.samba.org/samba/latest_news.html#4.17.0
This "just came my way" and I found the CVEs listed on
https://www.samba.org/samba/history/security.html which
address "All versions of Samba prior to 4.16.4" or
"All versions of Samba" rather long.
The 'glibc_headers' patch is now included.
Sad to say, due to the lack of hardware I can only include
the rootfile for x86_64.
Michael Tremer [Fri, 7 Oct 2022 14:50:17 +0000 (14:50 +0000)]
openvpnctrl: Update CRL before starting the client daemon
If the CRL is outdated for some reason (e.g. a backup restored from ISO
where we don't run the migration scripts), this will update it on
reboot/restart of the service.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Matthias Fischer [Fri, 14 Oct 2022 19:09:35 +0000 (21:09 +0200)]
unbound: Update to 1.17.0
For details see:
https://nlnetlabs.nl/projects/unbound/download/#unbound-1-17-0
"Features
Merge #753: ACL per interface. (New interface-* configuration options).
Merge #760: PROXYv2 downstream support. (New proxy-protocol-port configuration option).
Bug Fixes
Fix #728: alloc_reg_obtain() core dump. Stop double alloc_reg_release
when serviced_create fails.
Fix edns subnet so that scope 0 answers only match sourcemask 0 queries
for answers from cache if from a query with sourcemask 0.
Fix unittest for edns subnet change.
Merge #730 from luisdallos: Fix startup failure on Windows 8.1 due to
unsupported IPV6_USER_MTU socket option being set.
Fix ratelimit inconsistency, for ip-ratelimits the value is the amount
allowed, like for ratelimits.
Fix #734 [FR] enable unbound-checkconf to detect more (basic) errors.
Fix to log accept error ENFILE and EMFILE errno, but slowly, once per
10 seconds. Also log accept failures when no slow down is used.
Fix to avoid process wide fcntl calls mixed with nonblocking operations
after a blocked write.
Patch from Vadim Fedorenko that adds MSG_DONTWAIT to receive
operations, so that instruction reordering does not cause mistakenly
blocking socket operations.
Fix to wait for blocked write on UDP sockets, with a timeout if it
takes too long the packet is dropped.
Fix for wait for udp send to stop when packet is successfully sent.
Fix #741: systemd socket activation fails on IPv6.
Fix to update config tests to fix checking if nonblocking sockets work
on OpenBSD.
Slow down log frequency of write wait failures.
Fix to set out of file descriptor warning to operational verbosity.
Fix to log a verbose message at operational notice level if a thread is
not responding, to stats requests. It is logged with thread
identifiers.
Remove include that was there for debug purposes.
Fix to check pthread_t size after pthread has been detected.
Convert tdir tests to use the new skip_test functionality.
Remove unused testcode/mini_tpkg.sh file.
Better output for skipped tdir tests.
Fix doxygen warning in respip.h.
Fix to remove erroneous TC flag from TCP upstream.
Fix test tdir skip report printout.
Fix windows compile, the identifier interface is defined in headers.
Fix to close errno block in comm_point_tcp_handle_read outside of ifdef.
Fix static analysis report to remove dead code from the
rpz_callback_from_iterator_module function.
Fix to clean up after the acl_interface unit test.
Merge #764: Leniency for target discovery when under load (for
NRDelegation changes).
Use DEBUG_TDIR from environment in mini_tdir.sh for debugging.
Fix string comparison in mini_tdir.sh.
Make ede.tdir test more predictable by using static data.
Fix checkconf test for dnscrypt and proxy port.
Fix dnscrypt compile for proxy protocol code changes.
Fix to stop responses with TC flag from resulting in partial responses.
It retries to fetch the data elsewhere, or fails the query and in depth
fix removes the TC flag from the cached item.
Fix proxy length debug output printout typecasts.
Fix to stop possible loops in the tcp reuse code (write_wait list and
tcp_wait list). Based on analysis and patch from Prad Seniappan and
Karthik Umashankar.
Fix PROXYv2 header read for TCP connections when no proxied addresses
are provided."
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Jon Murphy [Fri, 7 Oct 2022 18:45:17 +0000 (13:45 -0500)]
manualpages: add and update help links to Wiki
- add help links for two new ipblocklist WebGUI pages
- update help links to proxy accounting
- add links to OpenVPN Net-to-Net Statistics,
MD Raid State, Update Accelerator,
OpenVPN Roadwarrior Connections Log
Signed-off-by: Jon Murphy <jon.murphy@ipfire.org> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Tue, 4 Oct 2022 13:32:47 +0000 (13:32 +0000)]
unbound-dhcp-leases-bridge: Fall back to the default domain
When the bridge cannot detect a domain name for any of the leases, it
uses localdomain which is not always the best choice. So instead, this
patches changes the behaviour that we read the default domain of the
firewall.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Mathew McBride [Mon, 3 Oct 2022 06:20:19 +0000 (06:20 +0000)]
initscripts: load RTC module (RX8025) for Ten64 board
For reasons I have not been able to determine, the RTC
module for the Ten64 board (rtc-rx8025) is not automatically
loaded at startup, despite every other relevant modules being
loaded.
modprobe it manually if we are on a Ten64 board.
Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Mathew McBride [Mon, 3 Oct 2022 06:20:18 +0000 (06:20 +0000)]
config: u-boot: bypass the u-boot script on Traverse Ten64
The Ten64 board runs a U-Boot which works best directly
booting EFI. Attempting to load your own DTB or other steps
will cause issues.
(see https://ten64doc.traverse.com.au/faq/#common-issues)
The current stable Ten64 firmware unfortunately searches for
boot.scr before bootaa64.efi. So redirect it back to the EFI path.
A future Ten64 firmware package will prefer EFI first before
any boot script avoiding this issue. I will provide a patch
reversing this when that day comes.
Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Tue, 4 Oct 2022 10:54:42 +0000 (12:54 +0200)]
rsync: Update to version 3.2.6 and fix Bug#12947
- Update from version 3.2.4 plus CVE-2022-29154 patch to 3.2.6
- Patch for CVE-2022-29154 applied in CU170 turned out to have a bug within it causing
rsync to fail with an error. Four additional commits were done to fix this bug and
its consequences but these were all applied in the rsync git repo after the patch had
been merged into CU170.
- Version 3.2.5 onwards contains the CVE-2022-29154 fix and associated commits.
- No update of rootfile required.
- Changelog
NEWS for rsync 3.2.6 (9 Sep 2022)
BUG FIXES:
More path-cleaning improvements in the file-list validation code to avoid
rejecting of valid args.
A file-list validation fix for a --files-from file that ends without a
line-terminating character.
Added a safety check that prevents the sender from removing destination
files when a local copy using --remove-source-files has some files that are
shared between the sending & receiving hierarchies, including the case
where the source dir & destination dir are identical.
Fixed a bug in the internal MD4 checksum code that could cause the digest to
be sporadically incorrect (the openssl version was/is fine).
A minor tweak to rrsync added "copy-devices" to the list of known args, but
left it disabled by default.
ENHANCEMENTS:
Rename --protect-args to --secluded-args to make it clearer how it differs
from the default backslash-escaped arg-protecting behavior of rsync. The
old option names are still accepted. The environment-variable override did
not change its name.
PACKAGING RELATED:
The configure option --with-protected-args was renamed to
--with-secluded-args. This option makes --secluded-args the default rsync
behavior instead of using backslash escaping for protecting args.
The mkgitver script now makes sure that a .git dir/file is in the top-level
source dir before calling git describe. It also runs a basic check on the
version value. This should avoid using an unrelated git description for
rsync's version.
DEVELOPER RELATED:
The configure script no longer sets the -pedantic-errors CFLAG (which it
used to try to do only for gcc).
The name_num_obj struct was modified to allow its dynamic name_num_item list
to be initialized in a better way.
NEWS for rsync 3.2.5 (14 Aug 2022)
SECURITY FIXES:
Added some file-list safety checking that helps to ensure that a rogue
sending rsync can't add unrequested top-level names and/or include
recursive names that should have been excluded by the sender. These extra
safety checks only require the receiver rsync to be updated. When dealing
with an untrusted sending host, it is safest to copy into a dedicated
destination directory for the remote content (i.e. don't copy into a
destination directory that contains files that aren't from the remote host
unless you trust the remote host). Fixes CVE-2022-29154.
A fix for CVE-2022-37434 in the bundled zlib (buffer overflow issue).
BUG FIXES:
Fixed the handling of filenames specified with backslash-quoted wildcards
when the default remote-arg-escaping is enabled.
Fixed the configure check for signed char that was causing a host that
defaults to unsigned characters to generate bogus rolling checksums. This
made rsync send mostly literal data for a copy instead of finding matching
data in the receiver's basis file (for a file that contains high-bit
characters).
Lots of manpage improvements, including an attempt to better describe how
include/exclude filters work.
If rsync is compiled with an xxhash 0.8 library and then moved to a system
with a dynamically linked xxhash 0.7 library, we now detect this and
disable the XX3 hashes (since these routines didn't stabilize until 0.8).
ENHANCEMENTS:
The --trust-sender option was added as a way to bypass the extra file-list
safety checking (should that be required).
PACKAGING RELATED:
A note to those wanting to patch older rsync versions: the changes in this
release requires the quoted argument change from 3.2.4. Then, you'll want
every single code change from 3.2.5 since there is no fluff in this release.
The build date that goes into the manpages is now based on the developer's
release date, not on the build's local-timezone interpretation of the date.
DEVELOPER RELATED:
Configure now defaults GETGROUPS_T to gid_t when cross compiling.
Configure now looks for the bsd/string.h include file in order to fix the
build on a host that has strlcpy() in the main libc but not defined in the
main string.h file.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Peter Müller [Mon, 19 Sep 2022 12:35:41 +0000 (12:35 +0000)]
linux: Enable seccomp filter on ARM
Since last time we checked, the kernel's security features on ARM have
improved notably (see CONFIG_RANDOMIZE_BASE discussion). This patch
therefore proposes to give the seccomp filter on both 32- and 64-bit ARM
another try, since it provides significant security benefit to
applications using it.
Due to operational constraints, rootfile changes have been omitted, and
will be conducted, should this patch be approved.
Note to future self: Once this patch is approved, applications using
seccomp (OpenSSH, Tor) need to be updated/shipped on ARM.
Fixes: #12366 Fixes: #12370 Cc: Arne Fitzenreiter <arne.fitzenreiter@ipfire.org> Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Peter Müller [Sun, 2 Oct 2022 14:47:52 +0000 (14:47 +0000)]
linux: Remove user-space probe support
From the kernels' documentation:
> Uprobes is the user-space counterpart to kprobes: they
> enable instrumentation applications (such as 'perf probe')
> to establish unintrusive probes in user-space binaries and
> libraries, by executing handler functions when the probes
> are hit by user-space applications.
>
> ( These probes come in the form of single-byte breakpoints,
> managed by the kernel and kept transparent to the probed
> application. )
To the best of the authors' understanding, no application on IPFire
needs this functionality, and given its abuse potential, we should
probably not enable it.
As expected, strace functionality is not impaired by this.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Security #5430: mqtt: DOS by quadratic with too many transactions in one parse (6.0.x backport)
Bug #5559: BUG_ON triggered from TmThreadsInjectFlowById (6.0.x backport)
Bug #5549: Failed assert DeStateSearchState (6.0.x)
Bug #5548: tcp: assertion failed in DoInsertSegment (BUG_ON) (6.0.x)
Bug #5547: rules: less strict parsing of unexpected flowbit options
Bug #5546: rules: don't error on bad hex in content
Bug #5540: detect: transform strip whitespace creates a 0-sized variable-length array: backport6
Bug #5505: http2: slow http2_frames_get_header_value_vec because of allocation [backport6]
Bug #5471: Reject action is no longer working (6.0.x backport)
Bug #5467: rules: more graceful handling of anomalies for stable versions
Bug #5459: Counters are not initialized in all places. (6.0.x backport)
Bug #5448: nfs: add maximum number of operations per compound (6.0.x backport)
Bug #5436: Infinite loop if the sniffing interface temporarily goes down (6.0.x backports)
Bug #5335: flow: vlan.use-for-tracking is not used for ICMPv4 (6.0.x backport)
Bug #4421: flow manager: using too much CPU during idle (6.0.x backport)
Feature #5535: ips: add "reject" action to exception policies (6.0.x backport)
Feature #5500: ips: midstream: add "exception policy" for midstream (6.0.x backport)
Task #5551: doc: add exception policy documentation (6.0.x)
Task #5533: detect/parse: add tests for parsing signatures with reject and drop action (6.0.x backport)
Task #5525: exceptions: error out when invalid configuration value is passed (6.0.x backport)
Task #5381: add `alert-queue-expand-fails` command-line option (6.0.x backport)
Task #5328: python: distutils deprecation warning (6.0.x backport)"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Peter Müller [Mon, 26 Sep 2022 18:50:08 +0000 (18:50 +0000)]
backup: Set owner of {ex,in}clude{,.user} files to "root"
Since these files are static, there is no legitimate reason why they
should be owned (hence writable) by "nobody". Also, according to
configroot's LFS file, this is the intended behaviour for the *.user
files, which is then overwritten by the backup LFS file. Therefore, set
the file mode of these statically - configroot does not feature other
files in /var/ipfire/backup/ anyway.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 24 Sep 2022 11:53:12 +0000 (13:53 +0200)]
ipblocklist-sources: Correct the info url - Fixes bug#12938
- With the .html ending the link gets a 404 Page not found error
Fixes: Bug#12938 Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Adolf Belka [Wed, 21 Sep 2022 17:16:11 +0000 (19:16 +0200)]
expat: Update to version 2.4.9
- Update from version 2.4.8 to 2.4.9
- Update of rootfile
- Changelog
Release 2.4.9 Tue September 20 2022
Security fixes:
#629 #640 CVE-2022-40674 -- Heap use-after-free vulnerability in
function doContent. Expected impact is denial of service
or potentially arbitrary code execution.
Bug fixes:
#634 MinGW: Fix mis-compilation for -D__USE_MINGW_ANSI_STDIO=0
#614 docs: Fix documentation on effect of switch XML_DTD on
symbol visibility in doc/reference.html
Other changes:
#638 MinGW: Make fix-xmltest-log.sh drop more Wine bug output
#596 #625 Autotools: Sync CMake templates with CMake 3.22
#608 CMake: Migrate from use of CMAKE_*_POSTFIX to
dedicated variables EXPAT_*_POSTFIX to stop affecting
other projects
#597 #599 Windows|CMake: Add missing -DXML_STATIC to test runners
and fuzzers
#512 #621 Windows|CMake: Render .def file from a template to fix
linking with -DEXPAT_DTD=OFF and/or -DEXPAT_ATTR_INFO=ON
#611 #621 MinGW|CMake: Apply MSVC .def file when linking
#622 #624 MinGW|CMake: Sync library name with GNU Autotools,
i.e. produce libexpat-1.dll rather than libexpat.dll
by default. Filename libexpat.dll.a is unaffected.
#632 MinGW|CMake: Set missing variable CMAKE_RC_COMPILER in
toolchain file "cmake/mingw-toolchain.cmake" to avoid
error "windres: Command not found" on e.g. Ubuntu 20.04
#597 #627 CMake: Unify inconsistent use of set() and option() in
context of public build time options to take need for
set(.. FORCE) in projects using Expat by means of
add_subdirectory(..) off Expat's users' shoulders
#626 #641 Stop exporting API symbols when building a static library
#644 Resolve use of deprecated "fgrep" by "grep -F"
#620 CMake: Make documentation on variables a bit more consistent
#636 CMake: Drop leading whitespace from a #cmakedefine line in
file expat_config.h.cmake
#594 xmlwf: Fix harmless variable mix-up in function nsattcmp
#592 #593 #610 Address Cppcheck warnings
#643 Address Clang 15 compiler warnings
#642 #644 Version info bumped from 9:8:8 to 9:9:8;
see https://verbump.de/ for what these numbers do
Infrastructure:
#597 #598 CI: Windows: Start covering MSVC 2022
#619 CI: macOS: Migrate off deprecated macOS 10.15
#632 CI: Linux: Make migration off deprecated Ubuntu 18.04 work
#643 CI: Upgrade Clang from 14 to 15
#637 apply-clang-format.sh: Add support for BSD find
#633 coverage.sh: Exclude MinGW headers
#635 coverage.sh: Fix name collision for -funsigned-char
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
For details see:
https://downloads.isc.org/isc/bind9/9.16.33/doc/arm/html/notes.html#notes-for-bind-9-16-33
"Security Fixes
Previously, there was no limit to the number of database lookups
performed while processing large delegations, which could be abused to
severely impact the performance of named running as a recursive
resolver. This has been fixed. (CVE-2022-2795)
ISC would like to thank Yehuda Afek from Tel-Aviv University and Anat
Bremler-Barr & Shani Stajnrod from Reichman University for bringing
this vulnerability to our attention. [GL #3394]
named running as a resolver with the stale-answer-client-timeout option
set to 0 could crash with an assertion failure, when there was a stale
CNAME in the cache for the incoming query. This has been fixed.
(CVE-2022-3080) [GL #3517]
A memory leak was fixed that could be externally triggered in the
DNSSEC verification code for the ECDSA algorithm. (CVE-2022-38177) [GL
#3487]
Memory leaks were fixed that could be externally triggered in the
DNSSEC verification code for the EdDSA algorithm. (CVE-2022-38178) [GL
#3487]
Feature Changes
Response Rate Limiting (RRL) code now treats all QNAMEs that are
subject to wildcard processing within a given zone as the same name, to
prevent circumventing the limits enforced by RRL. [GL #3459]
Zones using dnssec-policy now require dynamic DNS or inline-signing to
be configured explicitly. [GL #3381]
A backward-compatible approach was implemented for encoding
internationalized domain names (IDN) in dig and converting the domain
to IDNA2008 form; if that fails, BIND tries an IDNA2003 conversion. [GL
#3485]
Bug Fixes
A serve-stale bug was fixed, where BIND would try to return stale data
from cache for lookups that received duplicate queries or queries that
would be dropped. This bug resulted in premature SERVFAIL responses,
and has now been resolved. [GL #2982]"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Thu, 22 Sep 2022 11:43:10 +0000 (13:43 +0200)]
manualpages: Correct link to wiki for Network (other)
- Network (other) help link was set to go to Network (internal) wiki page
Link modified
- Running the check_manualpages.pl script requires it to be executable so the build
changed the permissions mode from 644 to 755
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Jon Murphy [Thu, 25 Aug 2022 00:31:29 +0000 (19:31 -0500)]
crontab: add periodic cleanup the collectd RRD (graphs)
- Created (mostly) for old openvpn graphs
- RRD removed when no graph modification for +365 days
- chosen since graph max out is 365 days
- fcron job runs once per week
- chosen since this is just a cleanup and it doesnt need to run everyday
Note: logging can be added if needed.
Signed-off-by: Jon Murphy <jon.murphy@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 19 Sep 2022 13:15:18 +0000 (15:15 +0200)]
log.dat: Add NUT entry for System Logs - Fixes bug#12921
- Also aligned all the code entries in %sections and %trsections
Suggested-by: Michael <ip.fire@die-fritzens.de> Tested-by: Michael <ip.fire@die-fritzens.de> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Adolf Belka [Wed, 21 Sep 2022 10:37:19 +0000 (12:37 +0200)]
cpufrequtils: Remove SERVICES entry for this package - fixes Bug#12933
- cpufrequtils is a set of "tools" to manage and set cpu freq settings.
- There is an initscript but this is only loading the cpu dependent kernel modules that
are required by cpufrequtils.
- Therefore cpufrequtils is not a service but a set of tools that are used when required.
- SERVICES line made blank so that this addon does not show up in the services addon table.
- Modified install initscript line to not use SERVICES variable
Fixes: Bug#12933 Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
For details see:
https://lists.nlnetlabs.nl/pipermail/unbound-users/2022-September/007885.html
"This release fixes CVE-2022-3204 Non-Responsive Delegation
Attack. It was reported by Yehuda Afek from Tel-Aviv
University and Anat Bremler-Barr and Shani Stajnrod from
Reichman University.
This fixes for better performance when under load, by cutting
promiscuous queries for nameserver discovery and limiting the
number of times a delegation point can look in the cache for
missing records.
Bug Fixes
- Patch for CVE-2022-3204 Non-Responsive Delegation Attack."
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
projects / people / ms / ipfire-2.x.git / log
