Zhao Liu [Tue, 13 May 2025 14:31:31 +0000 (22:31 +0800)]
qapi/misc-target: Fix the doc to distinguish query-sgx and query-sgx-capabilities
There're 2 QMP commands: query-sgx and query-sgx-capabilities, but
their outputs are very similar and the documentation lacks clear
differentiation.
From the codes, query-sgx is used to gather guest's SGX capabilities
(including SGX related CPUIDs and EPC sections' size, in SGXInfo), and
if guest doesn't have SGX, then QEMU will report the error message.
On the other hand, query-sgx-capabilities is used to gather host's SGX
capabilities (descripted by SGXInfo as well). And if host doesn't
support SGX, then QEMU will also report the error message.
Considering that SGXInfo is already documented and both these 2 commands
have enough error messages (for the exception case in their codes).
Therefore the QAPI documentation for these two commands only needs to
emphasize that one of them applies to the guest and the other to the
host.
Fix their documentation to reflect this difference.
common-user/host/riscv: use tail pseudoinstruction for calling tail
The j pseudoinstruction maps to a JAL instruction, which can only handle
a jump to somewhere with a signed 20-bit destination. In case of static
linking and LTO'ing this easily leads to "relocation truncated to fit"
error.
Switch to use tail pseudoinstruction, which is the standard way to
tail-call a function in medium code model (emits AUIPC+JALR).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250417072206.364008-1-uwu@icenowy.me> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Cc: qemu-stable@nongnu.org
(cherry picked from commit 22b448ccc6611a59d4aa54419f4d88c1f343cb35) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
virtio-net expects set_features() will be called when the feature set
used by the guest changes to update the number of virtqueues but it is
not called during reset, which will clear all features, leaving the
queues added for VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS. Not only these
extra queues are visible to the guest, they will cause segmentation
fault during migration.
Call set_features() during reset to remove those queues for virtio-net
as we call set_status(). It will also prevent similar bugs for
virtio-net and other devices in the future.
Fixes: f9d6dbf0bf6e ("virtio-net: remove virtio queues if the guest doesn't support multiqueue") Buglink: https://issues.redhat.com/browse/RHEL-73842 Cc: qemu-stable@nongnu.org Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250421-reset-v2-1-e4c1ead88ea1@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 0caed25cd171c611781589b5402161d27d57229c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
9pfs: fix FD leak and reduce latency of v9fs_reclaim_fd()
This patch fixes two different bugs in v9fs_reclaim_fd():
1. Reduce latency:
This function calls v9fs_co_close() and v9fs_co_closedir() in a loop. Each
one of the calls adds two thread hops (between main thread and a fs driver
background thread). Each thread hop adds latency, which sums up in
function's loop to a significant duration.
Reduce overall latency by open coding what v9fs_co_close() and
v9fs_co_closedir() do, executing those and the loop itself altogether in
only one background thread block, hence reducing the total amount of
thread hops to only two.
2. Fix file descriptor leak:
The existing code called v9fs_co_close() and v9fs_co_closedir() to close
file descriptors. Both functions check right at the beginning if the 9p
request was cancelled:
if (v9fs_request_cancelled(pdu)) {
return -EINTR;
}
So if client sent a 'Tflush' message, v9fs_co_close() / v9fs_co_closedir()
returned without having closed the file descriptor and v9fs_reclaim_fd()
subsequently freed the FID without its file descriptor being closed, hence
leaking those file descriptors.
This 2nd bug is fixed by this patch as well by open coding v9fs_co_close()
and v9fs_co_closedir() inside of v9fs_reclaim_fd() and not performing the
v9fs_request_cancelled(pdu) check there.
Fixes: 7a46274529c ('hw/9pfs: Add file descriptor reclaim support') Fixes: bccacf6c792 ('hw/9pfs: Implement TFLUSH operation') Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5747469d3f039c53147e850b456943a1d4b5485c.1741339452.git.qemu_oss@crudebyte.com>
(cherry picked from commit 89f7b4da7662ecc6840ffb0846045f03f9714bc6) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Even though this function is serialized to be always called from main
thread, v9fs_reclaim_fd() is dispatching the coroutine to a worker thread
in between via its v9fs_co_*() calls, hence leading to the situation where
v9fs_reclaim_fd() is effectively executed multiple times simultaniously,
which renders its LRU algorithm useless and causes high latency.
Fix this by adding a simple boolean variable to ensure this function is
only called once at a time. No synchronization needed for this boolean
variable as this function is only entered and returned on main thread.
Fixes: 7a46274529c ('hw/9pfs: Add file descriptor reclaim support') Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5c622067efd66dd4ee5eca740dcf263f41db20b2.1741339452.git.qemu_oss@crudebyte.com>
(cherry picked from commit 61da38db70affd925226ce1e8a61d761c20d045b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/i2c/imx: Always set interrupt status bit if interrupt condition occurs
According to the i.MX 8M Plus reference manual, the status flag
I2C_I2SR[IIF] continues to be set when an interrupt condition
occurs even when I2C interrupts are disabled (I2C_I2CR[IIEN] is
clear). However, the device model only sets the flag when I2C
interrupts are enabled which causes U-Boot to loop forever. Fix
the device model by always setting the flag and let I2C_I2CR[IIEN]
guard I2C interrupts only.
Also remove the comment in the code since it merely stated the
obvious and would be outdated now.
Cc: qemu-stable@nongnu.org Fixes: 20d0f9cf6a41 ("i.MX: Add I2C controller emulator") Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Corey Minyard <cminyard@mvista.com>
Message-ID: <20250507124040.425773-1-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 54e54e594bc8273d210f7ff4448c165a989cbbe8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/gpio/imx_gpio: Fix interpretation of GDIR polarity
According to the i.MX 8M Plus reference manual, a GPIO pin is
configured as an output when the corresponding bit in the GDIR
register is set. The function imx_gpio_set_int_line() is intended to
be a no-op if the pin is configured as an output, returning early in
such cases. However, it inverts the condition. Fix this by
returning early when the bit is set.
cc: qemu-stable@nongnu.org Fixes: f44272809779 ("i.MX: Add GPIO device") Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250501183445.2389-4-shentey@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit eba837a31b9579e30cc6d7ecb4b5c2662a6ffaba) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Both calls are in arm_tr_tb_stop(), one for the
DISAS_NEXT/DISAS_TOO_MANY handling, and one for the dc->condjump
condition-failed codepath. The DISAS_NEXT handling doesn't have this
problem because arm_post_translate_insn() does the handling of "emit
the label for the condition-failed conditional execution" and so
arm_tr_tb_stop() doesn't have dc->condjump set. But for
DISAS_TOO_MANY we don't do that.
Fix the bug by making arm_post_translate_insn() handle the
DISAS_TOO_MANY case. This only affects the SB and ISB insns when
used in Thumb mode inside an IT block: only these insns specifically
set is_jmp to TOO_MANY, and their A32 encodings are unconditional.
For the major TOO_MANY case (breaking the TB because it would cross a
page boundary) we do that check and set is_jmp to TOO_MANY only after
the call to arm_post_translate_insn(); so arm_post_translate_insn()
sees is_jmp == DISAS_NEXT, and we emit the correct code for that
situation.
With this fix we generate the somewhat more sensible set of TCG ops:
brcond_i32 ZF,$0x0,ne,$L1
set_label $L1
add_i32 pc,pc,$0x4
goto_tb $0x1
exit_tb $0x7c5434001b81
(NB: the TCG optimizer doesn't optimize out the jump-to-next, but
we can't really avoid emitting it because we don't know at the
point we're emitting the handling for the condexec check whether
this insn is going to happen to be a nop for us or not.)
Cc: qemu-stable@nongnu.org Fixes: https://gitlab.com/qemu-project/qemu/-/issues/2942 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250501125544.727038-1-peter.maydell@linaro.org
(cherry picked from commit 8ed7c0b6488a7f20318d6ba414f1cbcd0ed92afe) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The comment about not being able to define a field with
zero bits is out of date since 94597b6146f3
("decodetree: Allow !function with no input bits").
This fixes the missing load of imm in the disassembler.
Cc: qemu-stable@nongnu.org Fixes: 9d8caa67a24 ("target/avr: Add support for disassembling via option '-d in_asm'") Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 6b661b7ed7cd02c54a78426d5eb7dd8543b030ed) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Thu, 3 Apr 2025 19:39:54 +0000 (21:39 +0200)]
target/i386/hvf: fix lflags_to_rflags
Clear the flags before adding in the ones computed from lflags.
Cc: Wei Liu <liuwe@linux.microsoft.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 94a159f3dc737d00749cc930adaec112abe07b3c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Daan De Meyer [Sun, 23 Mar 2025 21:35:54 +0000 (22:35 +0100)]
smbios: Fix buffer overrun when using path= option
We have to make sure the array of bytes read from the path= file
is null-terminated, otherwise we run into a buffer overrun later on.
Fixes: bb99f4772f54017490e3356ecbb3df25c5d4537f ("hw/smbios: support loading OEM strings values from a file")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2879
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Valentin David <valentin.david@canonical.com>
Message-ID: <20250323213622.2581013-1-daan.j.demeyer@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit a7a05f5f6a4085afbede315e749b1c67e78c966b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Akihiko Odaki [Wed, 8 Jan 2025 12:13:29 +0000 (21:13 +0900)]
virtio-net: Fix num_buffers for version 1
The specification says the device MUST set num_buffers to 1 if
VIRTIO_NET_F_MRG_RXBUF has not been negotiated.
Fixes: df91055db5c9 ("virtio-net: enable virtio 1.0") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20250108-buffers-v1-1-a0c85ff31aeb@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit c17ad4b11bd268a35506cd976884562df6ca69d7)
(Mjt: adjust for 7.2.x) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Marco Cavenati [Wed, 26 Mar 2025 16:22:30 +0000 (17:22 +0100)]
migration: fix SEEK_CUR offset calculation in qio_channel_block_seek
The SEEK_CUR case in qio_channel_block_seek was incorrectly using the
'whence' parameter instead of the 'offset' parameter when calculating the
new position.
Fixes: 65cf200a51 ("migration: introduce a QIOChannel impl for BlockDriverState VMState") Signed-off-by: Marco Cavenati <Marco.Cavenati@eurecom.fr> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250326162230.3323199-1-Marco.Cavenati@eurecom.fr> Signed-off-by: Fabiano Rosas <farosas@suse.de>
(cherry picked from commit c0b32426ce56182c1ce2a12904f3a702c2ecc460) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When update_pagemask was split from helper_mtc0_pagemask,
we failed to actually write to the new parameter but continue
to write to env->CP0_PageMask. Thus the use within
page_table_walk_refill modifies cpu state and not the local
variable as expected.
Simplify by renaming to compute_pagemask and returning the
value directly. No need for either env or pointer return.
Fixes: 074cfcb4dae ("target/mips: Implement hardware page table walker for MIPS32") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250328175526.368121-4-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: qemu-stable@nongnu.org
(cherry picked from commit 256ba7715b109c080c0c77a3923df9e69736ba17) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Revert ee3863b9d41 and a08d60bc6c2b. The logic behind changing
the system page size because of what the Loongson kernel "prefers"
is flawed.
In the Loongson-2E manual, section 5.5, it is clear that the cpu
supports a 4k page size (along with many others). Similarly for
the Loongson-3 series CPUs, the 4k page size is mentioned in the
section 7.7 (PageMask Register). Therefore we must continue to
support a 4k page size.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250328175526.368121-2-richard.henderson@linaro.org>
[PMD: Mention Loongson-3 series CPUs] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit fca2817fdcb00e65020c2dcfcb0b23b2a20ea3c4)
(Mjt: context fixes for 7.2.x) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently resetting the leads to resynchronizing the Goldfish RTC
with the system clock of the host. In real hardware an RTC reset
would not change the wall time. Other RTCs like pl031 do not show
this behavior.
Move the synchronization of the RTC with the system clock to the
instance realization.
Cc: qemu-stable@nongnu.org Reported-by: Frederik Du Toit Lotter <fred.lotter@canonical.com> Fixes: 9a5b40b8427 ("hw: rtc: Add Goldfish RTC device") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250321221248.17764-1-heinrich.schuchardt@canonical.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 2542d5cf471a38c4ceb9717708178938b96ded47) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Wed, 19 Feb 2025 12:58:39 +0000 (15:58 +0300)]
Makefile: "make dist" generates a .xz, not .bz2
Fixes: 9bc9e9511944 (make-release: switch to .xz format by default) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 14fb6dbbc50f43057202c685c3aa017287cca37f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jamin Lin [Fri, 21 Mar 2025 09:25:58 +0000 (17:25 +0800)]
hw/misc/aspeed_hace: Fix buffer overflow in has_padding function
The maximum padding size is either 64 or 128 bytes and should always be smaller
than "req_len". If "padding_size" exceeds "req_len", then
"req_len - padding_size" underflows due to "uint32_t" data type, leading to a
large incorrect value (e.g., `0xFFXXXXXX`). This causes an out-of-bounds memory
access, potentially leading to a buffer overflow.
Added a check to ensure "padding_size" does not exceed "req_len" before
computing "pad_offset". This prevents "req_len - padding_size" from underflowing
and avoids accessing invalid memory.
Nicholas Piggin [Thu, 20 Mar 2025 12:24:40 +0000 (22:24 +1000)]
target/ppc: Fix e200 duplicate SPRs
DSRR0/1 registers are in the BookE ISA not e200 specific, so
remove the duplicate e200 register definitions.
Cc: Roman Kapl <rka@sysgo.com> Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2768 Fixes: 0e3bf4890906 ("ppc: add DBCR based debugging") Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit 73c0c904fc99e2ceecbbded84ec76d40d3f2daae)
(Mjt: context fix for v9.0.0-935-g581eea5d656b "target/ppc: Split off common embedded TLB init") Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add .set_vnet_le() function that always returns success, assuming that
vDPA h/w always implements LE data format. Otherwise, QEMU disables vDPA and
outputs the message:
"backend does not support LE vnet headers; falling back on userspace virtio"
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit b027f55a994af885a7a498a40373a2dcc2d8b15e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
VDPA didn't work on a big-endian machine due to missing/incorrect
CPU<->LE data format conversions.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Message-Id: <20250212164923.1971538-1-kshk@linux.ibm.com> Fixes: 10857ec0ad ("vhost: Add VhostShadowVirtqueue") Acked-by: Eugenio Pérez <eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 50e9754149066dc91f58405d3378b589098cb408) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/arm: Simplify pstate_sm check in sve_access_check
In StreamingMode, fp_access_checked is handled already.
We cannot fall through to fp_access_check lest we fall
foul of the double-check assertion.
Cc: qemu-stable@nongnu.org Fixes: 285b1d5fcef ("target/arm: Handle SME in sve_access_check") Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250307190415.982049-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: move declaration of 'ret' to top of block] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit cc7abc35dfa790ba6c20473c03745428c1c626b6)
(Mjt: target/arm/tcg/translate-a64.c is target/arm/translate-a64.c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/arm: Make DisasContext.{fp, sve}_access_checked tristate
The check for fp_excp_el in assert_fp_access_checked is
incorrect. For SME, with StreamingMode enabled, the access
is really against the streaming mode vectors, and access
to the normal fp registers is allowed to be disabled.
C.f. sme_enabled_check.
Convert sve_access_checked to match, even though we don't
currently check the exception state.
Cc: qemu-stable@nongnu.org Fixes: 3d74825f4d6 ("target/arm: Add SME enablement checks") Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250307190415.982049-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 298a04998fa4a6dc977abe9234d98dfcdab98423)
(Mjt: minor context fix in target/arm/tcg/translate.h,
target/arm/tcg/translate-a64.c is target/arm/translate-a64.c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Joe Komlodi [Mon, 10 Mar 2025 20:36:22 +0000 (20:36 +0000)]
util/cacheflush: Make first DSB unconditional on aarch64
On ARM hosts with CTR_EL0.DIC and CTR_EL0.IDC set, this would only cause
an ISB to be executed during cache maintenance, which could lead to QEMU
executing TBs containing garbage instructions.
This seems to be because the ISB finishes executing instructions and
flushes the pipeline, but the ISB doesn't guarantee that writes from the
executed instructions are committed. If a small enough TB is created, it's
possible that the writes setting up the TB aren't committed by the time the
TB is executed.
This function is intended to be a port of the gcc implementation
(https://github.com/gcc-mirror/gcc/blob/85b46d0795ac76bc192cb8f88b646a647acf98c1/libgcc/config/aarch64/sync-cache.c#L67)
which makes the first DSB unconditional, so we can fix the synchronization
issue by doing that as well.
Cc: qemu-stable@nongnu.org Fixes: 664a79735e4deb1 ("util: Specialize flush_idcache_range for aarch64") Signed-off-by: Joe Komlodi <komlodi@google.com>
Message-id: 20250310203622.1827940-2-komlodi@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit e6c38d2ab55d66c74ceade5699e22cabe9058d22) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
These warnings are breaking some build configurations since 2 months
now (https://gitlab.com/qemu-project/qemu/-/issues/2575):
ui/cocoa.m:662:14: error: 'CVDisplayLinkCreateWithCGDisplay' is deprecated: first deprecated in macOS 15.0 - use NSView.displayLink(target:selector:), NSWindow.displayLink(target:selector:), or NSScreen.displayLink(target:selector:) [-Werror,-Wdeprecated-declarations]
662 | if (!CVDisplayLinkCreateWithCGDisplay(display, &displayLink)) {
| ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/CoreVideo.framework/Headers/CVDisplayLink.h:89:20: note: 'CVDisplayLinkCreateWithCGDisplay' has been explicitly marked deprecated here
89 | CV_EXPORT CVReturn CVDisplayLinkCreateWithCGDisplay(
| ^
ui/cocoa.m:663:29: error: 'CVDisplayLinkGetNominalOutputVideoRefreshPeriod' is deprecated: first deprecated in macOS 15.0 - use NSView.displayLink(target:selector:), NSWindow.displayLink(target:selector:), or NSScreen.displayLink(target:selector:) [-Werror,-Wdeprecated-declarations]
663 | CVTime period = CVDisplayLinkGetNominalOutputVideoRefreshPeriod(displayLink);
| ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/CoreVideo.framework/Headers/CVDisplayLink.h:182:18: note: 'CVDisplayLinkGetNominalOutputVideoRefreshPeriod' has been explicitly marked deprecated here
182 | CV_EXPORT CVTime CVDisplayLinkGetNominalOutputVideoRefreshPeriod( CVDisplayLinkRef CV_NONNULL displayLink );
| ^
ui/cocoa.m:664:13: error: 'CVDisplayLinkRelease' is deprecated: first deprecated in macOS 15.0 - use NSView.displayLink(target:selector:), NSWindow.displayLink(target:selector:), or NSScreen.displayLink(target:selector:) [-Werror,-Wdeprecated-declarations]
664 | CVDisplayLinkRelease(displayLink);
| ^
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/System/Library/Frameworks/CoreVideo.framework/Headers/CVDisplayLink.h:249:16: note: 'CVDisplayLinkRelease' has been explicitly marked deprecated here
249 | CV_EXPORT void CVDisplayLinkRelease( CV_RELEASES_ARGUMENT CVDisplayLinkRef CV_NULLABLE displayLink );
| ^
3 errors generated.
For the next release, ignore the warnings using #pragma directives.
At least until we figure the correct new API usage.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu> Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-Id: <20241121131954.98949-1-philmd@linaro.org>
(cherry picked from commit 9cf6e41fe293dd56089faac94c36ff5cb3d96726) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Greg Kurz [Thu, 6 Mar 2025 17:41:13 +0000 (18:41 +0100)]
docs: Rename default-configs to configs
This was missed at the time.
Fixes: 812b31d3f91 ("configs: rename default-configs to configs and reorganise") Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250306174113.427116-1-groug@kaod.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 48170c2d865a5937092b1384421b01cd38113042)
(Mjt: context fix in docs/devel/kconfig.rst) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Mon, 10 Mar 2025 10:48:58 +0000 (11:48 +0100)]
block: Zero block driver state before reopening
Block drivers assume in their .bdrv_open() implementation that their
state in bs->opaque has been zeroed; it is initially allocated with
g_malloc0() in bdrv_open_driver().
bdrv_snapshot_goto() needs to make sure that it is zeroed again before
calling drv->bdrv_open() to avoid that block drivers use stale values.
One symptom of this bug is VMDK running into a double free when the user
tries to apply an internal snapshot like 'qemu-img snapshot -a test
test.vmdk'. This should be a graceful error because VMDK doesn't support
internal snapshots.
==25507== Invalid free() / delete / delete[] / realloc()
==25507== at 0x484B347: realloc (vg_replace_malloc.c:1801)
==25507== by 0x54B592A: g_realloc (gmem.c:171)
==25507== by 0x1B221D: vmdk_add_extent (../block/vmdk.c:570)
==25507== by 0x1B1084: vmdk_open_sparse (../block/vmdk.c:1059)
==25507== by 0x1AF3D8: vmdk_open (../block/vmdk.c:1371)
==25507== by 0x1A2AE0: bdrv_snapshot_goto (../block/snapshot.c:299)
==25507== by 0x205C77: img_snapshot (../qemu-img.c:3500)
==25507== by 0x58FA087: (below main) (libc_start_call_main.h:58)
==25507== Address 0x832f3e0 is 0 bytes inside a block of size 272 free'd
==25507== at 0x4846B83: free (vg_replace_malloc.c:989)
==25507== by 0x54AEAC4: g_free (gmem.c:208)
==25507== by 0x1AF629: vmdk_close (../block/vmdk.c:2889)
==25507== by 0x1A2A9C: bdrv_snapshot_goto (../block/snapshot.c:290)
==25507== by 0x205C77: img_snapshot (../qemu-img.c:3500)
==25507== by 0x58FA087: (below main) (libc_start_call_main.h:58)
This error was discovered by fuzzing qemu-img.
Cc: qemu-stable@nongnu.org Closes: https://gitlab.com/qemu-project/qemu/-/issues/2853 Closes: https://gitlab.com/qemu-project/qemu/-/issues/2851 Reported-by: Denis Rastyogin <gerben@altlinux.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250310104858.28221-1-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b75c5f9879166b86ed7c48b772fdcd0693e8a9a3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 28 Feb 2025 19:16:51 +0000 (19:16 +0000)]
hw/net/smc91c111: Don't allow data register access to overrun buffer
For accesses to the 91c111 data register, the address within the
packet's data frame is determined by a combination of the pointer
register and the offset used to access the data register, so that you
can access data at effectively wider than byte width. The pointer
register's pointer field is 11 bits wide, which is exactly the size
to index a 2048-byte data frame.
We weren't quite getting the logic right for ensuring that we end up
with a pointer value to use in the s->data[][] array that isn't out
of bounds:
* we correctly mask when getting the initial pointer value
* for the "autoincrement the pointer register" case, we
correctly mask after adding 1 so that the pointer register
wraps back around at the 2048 byte mark
* but for the non-autoincrement case where we have to add the
low 2 bits of the data register offset, we don't account
for the possibility that the pointer register is 0x7ff
and the addition should wrap
Fix this bug by factoring out the "get the p value to use as an array
index" into a function, making it use FIELD macro names rather than
hard-coded constants, and having a utility function that does "add a
value and wrap it" that we can use both for the "autoincrement" and
"add the offset bits" codepaths.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2758 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250228191652.1957208-1-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 700d3d6dd41de3bd3f1153e3cfe00b93f99b1441) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 28 Feb 2025 17:48:00 +0000 (17:48 +0000)]
hw/net/smc91c111: Sanitize packet length on tx
When the smc91c111 transmits a packet, it must read a control byte
which is at the end of the data area and CRC. However, we don't
sanitize the length field in the packet buffer, so if the guest sets
the length field to something large we will try to read past the end
of the packet data buffer when we access the control byte.
As usual, the datasheet says nothing about the behaviour of the
hardware if the guest misprograms it in this way. It says only that
the maximum valid length is 2048 bytes. We choose to log the guest
error and silently drop the packet.
This requires us to factor out the "mark the tx packet as complete"
logic, so we can call it for this "drop packet" case as well as at
the end of the loop when we send a valid packet.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2742 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250228174802.1945417-3-peter.maydell@linaro.org>
[PMD: Update smc91c111_do_tx() as len > MAX_PACKET_SIZE] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit aad6f264add3f2be72acb660816588fe09110069) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 28 Feb 2025 17:47:59 +0000 (17:47 +0000)]
hw/net/smc91c111: Sanitize packet numbers
The smc91c111 uses packet numbers as an index into its internal
s->data[][] array. Valid packet numbers are between 0 and 3, but
the code does not generally check this, and there are various
places where the guest can hand us an arbitrary packet number
and cause an out-of-bounds access to the data array.
Add validation of packet numbers. The datasheet is not very
helpful about how guest errors like this should be handled:
it says nothing on the subject, and none of the documented
error conditions are relevant. We choose to log the situation
with LOG_GUEST_ERROR and silently ignore the attempted operation.
In the places where we are about to access the data[][] array
using a packet number and we know the number is valid because
we got it from somewhere that has already validated, we add
an assert() to document that belief.
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250228174802.1945417-2-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 2fa3a5b9469615d06091cf473d172794148e1248) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 7 Feb 2025 15:11:57 +0000 (15:11 +0000)]
hw/net/smc91c111: Ignore attempt to pop from empty RX fifo
The SMC91C111 includes an MMU Command register which permits
the guest to remove entries from the RX FIFO. The datasheet
does not specify what happens if the guest tries to do this
when the FIFO is already empty; there are no status registers
containing error bits which might be applicable.
Currently we don't guard at all against pop of an empty
RX FIFO, with the result that we allow the guest to drive
the rx_fifo_len index to negative values, which will cause
smc91c111_receive() to write to the rx_fifo[] array out of
bounds when we receive the next packet.
Instead ignore attempts to pop an empty RX FIFO.
Cc: qemu-stable@nongnu.org Fixes: 80337b66a8e7 ("NIC emulation for qemu arm-softmmu")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2780 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250207151157.3151776-1-peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 937df81af6757638a7f1908747560dd342947213) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Afterward, there is no error and the sensor_groups directory appears
under /sys/firmware/opal/.
The SLW_IMAGE_BASE address looks like a workaround to intercept firmware
memory accesses, but that does not seem to be required now (and would
have been broken by the OCC common area region mapping change anyway).
So it can be removed.
Fixes: 3a1b70b66b5cb4 ("ppc/pnv: Fix OCC common area region mapping") Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit 29c041ca7f8d6910c894788482efff892789dcd2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Patrick Venture [Fri, 7 Mar 2025 10:08:19 +0000 (10:08 +0000)]
hw/gpio: npcm7xx: fixup out-of-bounds access
The reg isn't validated to be a possible register before
it's dereferenced for one case. The mmio space registered
for the gpio device is 4KiB but there aren't that many
registers in the struct.
Cc: qemu-stable@nongnu.org Fixes: 526dbbe0874 ("hw/gpio: Add GPIO model for Nuvoton NPCM7xx") Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250226024603.493148-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3b2e22c0bbe2ce07123d93961d52f17644562cd7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Denis Rastyogin [Tue, 4 Mar 2025 08:39:10 +0000 (11:39 +0300)]
block/qed: fix use-after-free by nullifying timer pointer after free
This error was discovered by fuzzing qemu-img.
In the QED block driver, the need_check_timer timer is freed in
bdrv_qed_detach_aio_context, but the pointer to the timer is not
set to NULL. This can lead to a use-after-free scenario
in bdrv_qed_drain_begin().
The need_check_timer pointer is set to NULL after freeing the timer.
Which helps catch this condition when checking in bdrv_qed_drain_begin().
Closes: https://gitlab.com/qemu-project/qemu/-/issues/2852 Signed-off-by: Denis Rastyogin <gerben@altlinux.org>
Message-ID: <20250304083927.37681-1-gerben@altlinux.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 2ad638a3d160923ef3dbf87c73944e6e44bdc724) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Instead of migrating the raw tick_offset, goldfish_rtc migrates a
recalculated value based on QEMU_CLOCK_VIRTUAL. As QEMU_CLOCK_VIRTUAL
stands still across a save-and-restore cycle, the guest RTC becomes out
of sync with the host RTC when the VM is restored.
As described in the bug description, it looks like this calculation was
copied from pl031 RTC, which had its tick_offset migration fixed by
Commit 032cfe6a79c8 ("pl031: Correctly migrate state when using -rtc
clock=host").
Migrate the tick_offset directly, adding it as a version-dependent field
to VMState. Keep the old behavior when migrating from previous versions.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2033 Signed-off-by: Rodrigo Dias Correa <r@drigo.nl> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250114212150.228241-1-r@drigo.nl> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 3521f9cadc29c7d68b73b325ddb46a7acebf6212) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/riscv: throw debug exception before page fault
In the RISC-V privileged ISA section 3.1.15 table 15, it is determined
that a debug exception that is triggered from a load/store has a higher
priority than a possible fault that this access might trigger.
This is not the case ATM as shown in [1]. Adding a breakpoint in an
address that deliberately will fault is causing a load page fault
instead of a debug exception. The reason is that we're throwing in the
page fault as soon as the fault occurs (end of riscv_cpu_tlb_fill(),
raise_mmu_exception()), not allowing the installed watchpoints to
trigger.
Call cpu_check_watchpoint() in the page fault path to search and execute
any watchpoints that might exist for the address, never returning back
to the fault path. If no watchpoints are found cpu_check_watchpoint()
will return and we'll fall-through the regular path to
raise_mmu_exception().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2627 Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250121170626.1992570-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit c86edc547692d812d1dcc04220c38310be2c00c3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/riscv/debug.c: use wp size = 4 for 32-bit CPUs
The mcontrol select bit (19) is always zero, meaning our triggers will
always match virtual addresses. In this condition, if the user does not
specify a size for the trigger, the access size defaults to XLEN.
At this moment we're using def_size = 8 regardless of CPU XLEN. Use
def_size = 4 in case we're running 32 bits.
Fixes: 95799e36c1 ("target/riscv: Add initial support for the Sdtrig extension") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250121170626.1992570-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 3fba76e61caa46329afc399b3ecaaba70c8b0a4e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Max Chou [Fri, 24 Jan 2025 10:14:47 +0000 (18:14 +0800)]
target/riscv: rvv: Fix unexpected behavior of vector reduction instructions when vl is 0
According to the Vector Reduction Operations section in the RISC-V "V"
Vector Extension spec,
"If vl=0, no operation is performed and the destination register is not
updated."
The vd should be updated when vl is larger than 0.
Fixes: fe5c9ab1fc ("target/riscv: vector single-width integer reduction instructions") Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR") Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250124101452.2519171-1-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit ffd455963f230c7dc04965609d6675da687a5a78) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
The function `vhost_dev_init()` expects the `struct vhost_dev`
(passed as a parameter) to be fully initialized. This is important
because some parts of the code check whether `vhost_dev->config_ops`
is NULL to determine if it has been set (e.g. later via
`vhost_dev_set_config_notifier`).
To ensure this initialization, it’s better to allocate the entire
`CryptoDevBackendVhost` structure (which includes `vhost_dev`) using
`g_mem0()`, following the same approach used for other vhost devices,
such as in `vhost_net_init()`.
Fixes: 042cea274c ("cryptodev: add vhost-user as a new cryptodev backend") Cc: qemu-stable@nongnu.org Reported-by: myluo24@m.fudan.edu.cn Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250211135523.101203-1-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 83cb18ac4500f3a14067b19408705068647cb0c5) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sairaj Kodilkar [Fri, 7 Feb 2025 04:53:54 +0000 (10:23 +0530)]
amd_iommu: Use correct bitmask to set capability BAR
AMD IOMMU provides the base address of control registers through
IVRS table and PCI capability. Since this base address is of 64 bit,
use 32 bits mask (instead of 16 bits) to set BAR low and high.
Fixes: d29a09ca68 ("hw/i386: Introduce AMD IOMMU") Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Message-Id: <20250207045354.27329-3-sarunkod@amd.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 3684717b7407cc395dc9bf522e193dbc85293dee)
(Mjt: adjust for 7.2.x) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/i386/amd_iommu: Explicit use of AMDVI_BASE_ADDR in amdvi_init
By accessing MemoryRegion internals, amdvi_init() gives the false
idea that the PCI BAR can be modified. However this isn't true
(at least the model isn't ready for that): the device is explicitly
maps at the BAR at the fixed AMDVI_BASE_ADDR address in
amdvi_sysbus_realize(). Since the SysBus API isn't designed to
remap regions, directly use the fixed address in amdvi_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230313153031.86107-3-philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 6291a28645a0656477bc5962a81b181e6a99487c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sairaj Kodilkar [Fri, 7 Feb 2025 04:53:53 +0000 (10:23 +0530)]
amd_iommu: Use correct DTE field for interrupt passthrough
Interrupt passthrough is determine by the bits 191,190,187-184.
These bits are part of the 3rd quad word (i.e. index 2) in DTE. Hence
replace dte[3] by dte[2].
Fixes: b44159fe0 ("x86_iommu/amd: Add interrupt remap support when VAPIC is not enabled") Signed-off-by: Sairaj Kodilkar <sarunkod@amd.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Message-Id: <20250207045354.27329-2-sarunkod@amd.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 63dc0b8647391b372f3bb38ff1066f6b4a5e6ea1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kconfig: Extract CONFIG_USB_CHIPIDEA from CONFIG_IMX
TYPE_CHIPIDEA models an IP block which is also used in TYPE_ZYNQ_MACHINE which
itself is not an IMX device. CONFIG_ZYNQ selects CONFIG_USB_EHCI_SYSBUS while
TYPE_CHIPIDEA is a separate compilation unit, so only works by accident if
CONFIG_IMX is given. Fix that by extracting CONFIG_USB_CHIPIDEA from CONFIG_IMX.
cc: qemu-stable@nongnu.org Fixes: 616ec12d0fcc "hw/arm/xilinx_zynq: Fix USB port instantiation" Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-id: 20250209103604.29545-1-shentey@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 464ce71a963b3dfc290cd59c3d1bfedf11c004df)
(Mjt: context fixup due to missing v8.0.0-1939-gde6cd7599b51 "meson: Replace softmmu_ss -> system_ss", v9.1.0-609-ge02491903d50 "hw/usb: Remove tusb6010 USB controller", v9.2.0-1303-g1b326f278d05 "hw/pci-host/designware: Expose MSI IRQ") Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Thu, 30 Jan 2025 18:23:01 +0000 (18:23 +0000)]
hw/intc/arm_gicv3_cpuif: Don't downgrade monitor traps for AArch32 EL3
In the gicv3_{irq,fiq,irqfiq}_access() functions, there is a check
which downgrades a CP_ACCESS_TRAP_EL3 to CP_ACCESS_TRAP if EL3 is not
AArch64. This has been there since the GIC was first implemented,
but it isn't right: if we are trapping because of SCR.IRQ or SCR.FIQ
then we definitely want to be going to EL3 (doing
AArch32.TakeMonitorTrapException() in pseudocode terms). We might
want to not take a trap at all, but we don't ever want to go to the
default target EL, because that would mean, for instance, taking a
trap to Hyp mode if the trapped access was made from Hyp mode.
(This might have been an attempt to work around our failure to
properly implement Monitor Traps.)
Remove the bogus check.
Cc: qemu-stable@nongnu.org Fixes: 359fbe65e01e ("hw/intc/arm_gicv3: Implement GICv3 CPU interface registers") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250130182309.717346-7-peter.maydell@linaro.org
(cherry picked from commit d04c6c3c000ab3e588a2b91641310aeea89408f7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Thu, 30 Jan 2025 18:23:00 +0000 (18:23 +0000)]
target/arm: Make CP_ACCESS_TRAPs to AArch32 EL3 be Monitor traps
In system register access pseudocode the common pattern for
AArch32 registers with access traps to EL3 is:
at EL1 and EL2:
if HaveEL(EL3) && !ELUsingAArch32(EL3) && (SCR_EL3.TERR == 1) then
AArch64.AArch32SystemAccessTrap(EL3, 0x03);
elsif HaveEL(EL3) && ELUsingAArch32(EL3) && (SCR.TERR == 1) then
AArch32.TakeMonitorTrapException();
at EL3:
if (PSTATE.M != M32_Monitor) && (SCR.TERR == 1) then
AArch32.TakeMonitorTrapException();
(taking as an example the ERRIDR access pseudocode).
This implements the behaviour of (in this case) SCR.TERR that
"Accesses to the specified registers from modes other than Monitor
mode generate a Monitor Trap exception" and of SCR_EL3.TERR that
"Accesses of the specified Error Record registers at EL2 and EL1
are trapped to EL3, unless the instruction generates a higher
priority exception".
In QEMU we don't implement this pattern correctly in two ways:
* in access_check_cp_reg() we turn the CP_ACCESS_TRAP_EL3 into
an UNDEF, not a trap to Monitor mode
* in the access functions, we check trap bits like SCR.TERR
only when arm_current_el(env) < 3 -- this is correct for
AArch64 EL3, but misses the "trap non-Monitor-mode execution
at EL3 into Monitor mode" case for AArch32 EL3
In this commit we fix the first of these two issues, by
making access_check_cp_reg() handle CP_ACCESS_TRAP_EL3
as a Monitor trap. This is a kind of exception that we haven't
yet implemented(!), so we need a new EXCP_MON_TRAP for it.
This diverges from the pseudocode approach, where every access check
function explicitly checks for "if EL3 is AArch32" and takes a
monitor trap; if we wanted to be closer to the pseudocode we could
add a new CP_ACCESS_TRAP_MONITOR and make all the accessfns use it
when appropriate. But because there are no non-standard cases in the
pseudocode (i.e. where either it raises a Monitor trap that doesn't
correspond to an AArch64 SystemAccessTrap or where it raises a
SystemAccessTrap that doesn't correspond to a Monitor trap), handling
this all in one place seems less likely to result in future bugs
where we forgot again about this special case when writing an
accessor.
(The cc of stable here is because "hw/intc/arm_gicv3_cpuif: Don't
downgrade monitor traps for AArch32 EL3" which is also cc:stable
will implicitly use the new EXCP_MON_TRAP code path.)
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250130182309.717346-6-peter.maydell@linaro.org
(cherry picked from commit 4cf4948651615181c5bc3d0e4a9f5c46be576bb2)
(Mjt: context fix due to missing v9.0.0-151-gb36a32ead159 "target/arm: Add support for Non-maskable Interrupt", v8.0.0-2011-g11b76fda0adc "target/arm: Implement GPC exceptions") Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Thu, 30 Jan 2025 18:22:59 +0000 (18:22 +0000)]
target/arm: Report correct syndrome for UNDEFINED LOR sysregs when NS=0
The pseudocode for the accessors for the LOR sysregs says they
are UNDEFINED if SCR_EL3.NS is 0. We were reporting the wrong
syndrome value here; use CP_ACCESS_TRAP_UNCATEGORIZED.
Cc: qemu-stable@nongnu.org Fixes: 2d7137c10faf ("target/arm: Implement the ARMv8.1-LOR extension") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250130182309.717346-5-peter.maydell@linaro.org
(cherry picked from commit 707d478ed8f2da6f2327e5af780890c1fd9c371a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Thu, 30 Jan 2025 18:22:58 +0000 (18:22 +0000)]
target/arm: Report correct syndrome for UNDEFINED S1E2 AT ops at EL3
The pseudocode for AT S1E2R and AT S1E2W says that they should be
UNDEFINED if executed at EL3 when EL2 is not enabled. We were
incorrectly using CP_ACCESS_TRAP and reporting the wrong exception
syndrome as a result. Use CP_ACCESS_TRAP_UNCATEGORIZED.
Cc: qemu-stable@nongnu.org Fixes: 2a47df953202e1 ("target-arm: Wire up AArch64 EL2 and EL3 address translation ops") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250130182309.717346-4-peter.maydell@linaro.org
(cherry picked from commit ccda792945d650bce4609c8dbce8814a220df1bb) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Thu, 30 Jan 2025 18:22:56 +0000 (18:22 +0000)]
target/arm: Report correct syndrome for UNDEFINED CNTPS_*_EL1 from EL2 and NS EL1
The access pseudocode for the CNTPS_TVAL_EL1, CNTPS_CTL_EL1 and
CNTPS_CVAL_EL1 secure timer registers says that they are UNDEFINED
from EL2 or NS EL1. We incorrectly return CP_ACCESS_TRAP from the
access function in these cases, which means that we report the wrong
syndrome value to the target EL.
Use CP_ACCESS_TRAP_UNCATEGORIZED, which reports the correct syndrome
value for an UNDEFINED instruction.
Cc: qemu-stable@nongnu.org Fixes: b4d3978c2fd ("target-arm: Add the AArch64 view of the Secure physical timer") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250130182309.717346-2-peter.maydell@linaro.org
(cherry picked from commit b819fd6994243aee6f9613edbbacedce4f511c32) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The gdbstub implementation for the Sparc architecture would
incorrectly calculate the the floating point register offset.
This resulted in, for example, registers f32 and f34 to point to
the same value.
The issue was caused by the confusion between even register numbers
and even register indexes. For example, the register index of f32 is 64
and f34 is 65.
Cc: qemu-stable@nongnu.org Fixes: 30038fd81808 ("target-sparc: Change fpr representation to doubles.") Signed-off-by: Mikael Szreder <git@miszr.win> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250214070343.11501-1-git@miszr.win>
(cherry picked from commit 7a74e468089a58756b438d31a2a9a97f183780d7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Volker Rümelin [Tue, 31 Dec 2024 11:59:50 +0000 (12:59 +0100)]
ui/sdl2: reenable the SDL2 Windows keyboard hook procedure
Windows only:
The libSDL2 Windows message loop needs the libSDL2 Windows low
level keyboard hook procedure to grab the left and right Windows
keys correctly. Reenable the SDL2 Windows keyboard hook procedure.
Since SDL2 2.30.4 the SDL2 keyboard hook procedure also filters
out the special left Control key event for every Alt Gr key event
on keyboards with an international layout. This means the QEMU low
level keyboard hook procedure is no longer needed. Remove the QEMU
Windows keyboard hook procedure.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2139
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2323 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Link: https://lore.kernel.org/r/20241231115950.6732-1-vr_qemu@t-online.de Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 4dafba778aa3e5f5fd3b2c6333afd7650dcf54e2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix in ui/sdl2.c and adaptation in ui/meson.build)
Khem Raj [Fri, 7 Feb 2025 16:09:20 +0000 (16:09 +0000)]
linux-user: Do not define struct sched_attr if libc headers do
glibc 2.41+ has added [1] definitions for sched_setattr and
sched_getattr functions and struct sched_attr. Therefore, it needs
to be checked for here as well before defining sched_attr, to avoid
a compilation failure.
Define sched_attr conditionally only when SCHED_ATTR_SIZE_VER0 is
not defined.
Hongren Zheng [Mon, 13 Jan 2025 09:38:56 +0000 (17:38 +0800)]
hw/usb/canokey: Fix buffer overflow for OUT packet
When USBPacket in OUT direction has larger payload
than the ep_out_buffer (of size 512), a buffer overflow
would occur.
It could be fixed by limiting the size of usb_packet_copy
to be at most buffer size. Further optimization gets rid
of the ep_out_buffer and directly uses ep_out as the target
buffer.
This is reported by a security researcher who artificially
constructed an OUT packet of size 2047. The report has gone
through the QEMU security process, and as this device is for
testing purpose and no deployment of it in virtualization
environment is observed, it is triaged not to be a security bug.
Cc: qemu-stable@nongnu.org Fixes: d7d34918551dc48 ("hw/usb: Add CanoKey Implementation") Reported-by: Juan Jose Lopez Jaimez <thatjiaozi@gmail.com> Signed-off-by: Hongren Zheng <i@zenithal.me>
Message-id: Z4TfMOrZz6IQYl_h@Sun Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 664280abddcb3cacc9c6204706bb739fcc1316f7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 24 Jan 2025 16:27:23 +0000 (16:27 +0000)]
target/arm: arm_reset_sve_state() should set FPSR, not FPCR
The pseudocode ResetSVEState() does:
FPSR = ZeroExtend(0x0800009f<31:0>, 64);
but QEMU's arm_reset_sve_state() called vfp_set_fpcr() by accident.
Before the advent of FEAT_AFP, this was only setting a collection of
RES0 bits, which vfp_set_fpsr() would then ignore, so the only effect
was that we didn't actually set the FPSR the way we are supposed to
do. Once FEAT_AFP is implemented, setting the bottom bits of FPSR
will change the floating point behaviour.
Call vfp_set_fpsr(), as we ought to.
(Note for stable backports: commit 7f2a01e7368f9 moved this function
from sme_helper.c to helper.c, but it had the same bug before the
move too.)
Cc: qemu-stable@nongnu.org Fixes: f84734b87461 ("target/arm: Implement SMSTART, SMSTOP") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250124162836.2332150-4-peter.maydell@linaro.org
(cherry picked from commit 1edc3d43f20df0d04f8d00b906ba19fed37512a5) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(it is in sme_helper.c in 7.2, not in helper.c)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9fb1c9a1bb26e111ee5fa5538070cd684de14c08) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Igor Mammedov [Wed, 15 Jan 2025 12:53:41 +0000 (13:53 +0100)]
pci: acpi: Windows 'PCI Label Id' bug workaround
Current versions of Windows call _DSM(func=7) regardless
of whether it is supported or not. It leads to NICs having bogus
'PCI Label Id = 0', where none should be set at all.
Also presence of 'PCI Label Id' triggers another Windows bug
on localized versions that leads to hangs. The later bug is fixed
in latest updates for 'Windows Server' but not in consumer
versions of Windows (and there is no plans to fix it
as far as I'm aware).
Given it's easy, implement Microsoft suggested workaround
(return invalid Package) so that affected Windows versions
could boot on QEMU.
This would effectvely remove bogus 'PCI Label Id's on NICs,
but MS teem confirmed that flipping 'PCI Label Id' should not
change 'Network Connection' ennumeration, so it should be safe
for QEMU to change _DSM without any compat code.
Smoke tested with WinXP and WS2022
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/774 Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 0b053391985abcc40b16ac8fc4a7f6588d1d95c1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Igor Mammedov [Wed, 15 Jan 2025 12:53:40 +0000 (13:53 +0100)]
tests: acpi: whitelist expected blobs
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20250115125342.3883374-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 1ad32644fe4c9fb25086be15a66dde1d55d3410f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: drop x86/ subdir and drop a few files not relevant for 7.2)
Nicholas Piggin [Thu, 12 Dec 2024 12:04:02 +0000 (22:04 +1000)]
pci/msix: Fix msix pba read vector poll end calculation
The end vector calculation has a bug that results in polling fewer
than required vectors when reading at a non-zero offset in PBA memory.
Fixes: bbef882cc193 ("msi: add API to get notified about pending bit poll") Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20241212120402.1475053-1-npiggin@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 42e2a7a0ab23784e44fcb18369e06067abc89305) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sebastian Ott [Tue, 3 Dec 2024 12:19:28 +0000 (13:19 +0100)]
pci: ensure valid link status bits for downstream ports
PCI hotplug for downstream endpoints on arm fails because Linux'
PCIe hotplug driver doesn't like the QEMU provided LNKSTA:
pcieport 0000:08:01.0: pciehp: Slot(2): Card present
pcieport 0000:08:01.0: pciehp: Slot(2): Link Up
pcieport 0000:08:01.0: pciehp: Slot(2): Cannot train link: status 0x2000
There's 2 cases where LNKSTA isn't setup properly:
* the downstream device has no express capability
* max link width of the bridge is 0
Move the sanity checks added via 88c869198aa63
("pci: Sanity test minimum downstream LNKSTA") outside of the
branch to make sure downstream ports always have a valid LNKSTA.
Signed-off-by: Sebastian Ott <sebott@redhat.com> Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20241203121928.14861-1-sebott@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 694632fd44987cc4618612a38ad151047524a590) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/usb/hcd-xhci-pci: Use modulo to select MSI vector as per spec
QEMU would crash with a failed assertion if the XHCI controller
attempted to raise the interrupt on an interrupter corresponding
to a MSI vector with a higher index than the highest configured
for the device by the guest driver.
This behaviour is correct on the MSI/PCI side: per PCI 3.0 spec,
devices must ensure they do not send MSI notifications for
vectors beyond the range of those allocated by the system/driver
software. Unlike MSI-X, there is no generic way for handling
aliasing in the case of fewer allocated vectors than requested,
so the specifics are up to device implementors. (Section
6.8.3.4. "Sending Messages")
It turns out the XHCI spec (Implementation Note in section 4.17,
"Interrupters") requires that the host controller signal the MSI
vector with the number computed by taking the interrupter number
modulo the number of enabled MSI vectors.
This change introduces that modulo calculation, fixing the
failed assertion. This makes the device work correctly in MSI mode
with macOS's XHCI driver, which only allocates a single vector.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250112210056.16658-2-phil@philjordan.eu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit bb5b7fced6b5d3334ab20702fc846e47bb1fb731) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Han Han [Thu, 19 Dec 2024 08:51:38 +0000 (16:51 +0800)]
target/i386/cpu: Fix notes for CPU models
Fixes: 644e3c5d812 ("missing vmx features for Skylake-Server and Cascadelake-Server") Signed-off-by: Han Han <hhan@redhat.com> Reviewed-by: Chenyi Qiang <chenyi.qiang@intel.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 93dcc9390e5ad0696ae7e9b7b3a5b08c2d1b6de6) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
TCG trace-events were deprecated before the v6.2 release,
and removed for v7.0.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit b4859e8f33a7d9c793a60395f792c10190cb4f78) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Let's handle that in a better way by rejecting such weird RAM sizes
right from the start:
# qemu-system-s390x --enable-kvm --nographic -m 1234K
qemu-system-s390x: ram size must be multiples of 1 MiB
Message-ID: <20241219144115.2820241-2-david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com>
(cherry picked from commit 14e568ab4836347481af2e334009c385f456a734) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Wed, 18 Dec 2024 06:21:59 +0000 (07:21 +0100)]
meson.build: Disallow libnfs v6 to fix the broken macOS build
The macOS builds in our CI (and possibly other very recent distros)
are currently broken since the update to libnfs version 6 there.
That version apparently comes with a big API breakage. v5.0.3 was
the final release of the old API (see the libnfs commit here:
https://github.com/sahlberg/libnfs/commit/4379837 ).
Disallow version 6.x for now to get the broken CI job working
again. Once somebody had enough time to adapt our code in
block/nfs.c, we can revert this change again.
Message-ID: <20241218065157.209020-1-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit e2d98f257138b83b6a492d1da5847a7fe0930d10) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup)
Peter Maydell [Fri, 13 Dec 2024 18:23:37 +0000 (18:23 +0000)]
hw/intc/arm_gicv3_its: Zero initialize local DTEntry etc structs
In the GICv3 ITS model, we have a common coding pattern which has a
local C struct like "DTEntry dte", which is a C representation of an
in-guest-memory data structure, and we call a function such as
get_dte() to read guest memory and fill in the C struct. These
functions to read in the struct sometimes have cases where they will
leave early and not fill in the whole struct (for instance get_dte()
will set "dte->valid = false" and nothing else for the case where it
is passed an entry_addr implying that there is no L2 table entry for
the DTE). This then causes potential use of uninitialized memory
later, for instance when we call a trace event which prints all the
fields of the struct. Sufficiently advanced compilers may produce
-Wmaybe-uninitialized warnings about this, especially if LTO is
enabled.
Rather than trying to carefully separate out these trace events into
"only the 'valid' field is initialized" and "all fields can be
printed", zero-init all the structs when we define them. None of
these structs are large (the biggest is 24 bytes) and having
consistent behaviour is less likely to be buggy.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2718 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241213182337.3343068-1-peter.maydell@linaro.org
(cherry picked from commit 9678b9c505725732353baefedb88b53c2eb8a184) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the binary loaded via -kernel is *not* a linux kernel (in which
case protocol == 0), do not patch the linux kernel header fields.
It's (a) pointless and (b) might break binaries by random patching
and (c) changes the binary hash which in turn breaks secure boot
verification.
Background: OVMF happily loads and runs not only linux kernels but
any efi binary via direct kernel boot.
Note: Breaking the secure boot verification is a problem for linux
kernels too, but fixed that is left for another day ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240905141211.1253307-3-kraxel@redhat.com>
(cherry picked from commit 57e2cc9abf5da38f600354fe920ff20e719607b4) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: it is in hw/i386/x86.c not hw/i386/x86-common.c in 7.2.x)
Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240527040711.311865-1-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit e7fca81e170530104c36bd8f3e1d7e7c11011481) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ahmad Fatoum [Thu, 22 Aug 2024 16:38:38 +0000 (18:38 +0200)]
hw/openrisc/openrisc_sim: keep serial@90000000 as default
We used to only have a single UART on the platform and it was located at
address 0x90000000. When the number of UARTs was increased to 4, the
first UART remained at it's location, but instead of being the first one
to be registered, it became the last.
This caused QEMU to pick 0x90000300 as the default UART, which broke
software that hardcoded the address of 0x90000000 and expected it's
output to be visible when the user configured only a single console.
This caused regressions[1] in the barebox test suite when updating to a
newer QEMU. As there seems to be no good reason to register the UARTs in
inverse order, let's register them by ascending address, so existing
software can remain oblivious to the additional UART ports.
Changing the order of uart registration alone breaks Linux which
was choosing the UART at 0x90000300 as the default for ttyS0. To fix
Linux we fix three things in the device tree:
1. Define stdout-path only one time for the first registered UART
instead of incorrectly defining for each UART.
2. Change the UART alias name from 'uart0' to 'serial0' as almost all
Linux tty drivers look for an alias starting with "serial".
3. Add the UART nodes so they appear in the final DTB in the
order starting with the lowest address and working upwards.
In summary these changes mean that the QEMU default UART (serial_hd(0))
is now setup where:
* serial_hd(0) is the lowest-address UART
* serial_hd(0) is listed first in the DTB
* serial_hd(0) is the /chosen/stdout-path one
* the /aliases/serial0 alias points at serial_hd(0)
Fixes: 777784bda468 ("hw/openrisc: support 4 serial ports in or1ksim") Cc: qemu-stable@nongnu.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
[stafford: Change to serial0 alias and update change message, reverse
uart registration order] Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 26dcf2be7e153defa289d20317707af034aca692) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Nicholas Piggin [Mon, 11 Nov 2024 06:37:49 +0000 (16:37 +1000)]
target/ppc: Fix non-maskable interrupt while halted
The ppc (pnv and spapr) NMI injection code does not go through the
asynchronous interrupt path and set a bit in env->pending_interrupts
and raise an interrupt request that the cpu_exec() loop can see.
Instead it injects the exception directly into registers.
This can lead to cpu_exec() missing that the thread has work to do,
if a NMI is injected while it was idle.
Fix this by clearing halted when injecting the interrupt. Probably
NMI injection should be reworked to use the interrupt request interface,
but this seems to work as a minimal fix.
Fixes: 3431648272d3 ("spapr: Add support for new NMI interface") Reviewed-by: Glenn Miles <milesg@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit fa416ae6157a933ad3f7106090684759baaaf3c9) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With a valid file ID (FID) of an open file, it should be possible to send
a 'Tgettattr' 9p request and successfully receive a 'Rgetattr' response,
even if the file has been removed in the meantime. Currently this would
fail with ENOENT.
I.e. this fixes the following misbehaviour with a 9p Linux client:
open("/home/tst/filename", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
unlink("/home/tst/filename") = 0
fstat(3, 0x23aa1a8) = -1 ENOENT (No such file or directory)
This is because 9p server is always using a path name based lstat() call
which fails as soon as the file got removed. So to fix this, use fstat()
whenever we have an open file descriptor already.
Fixes: 00ede4c2529b ("virtio-9p: getattr server implementation...")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/103 Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4c41ad47f449a5cc8bfa9285743e029080d5f324.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit c81e7219e0736f80bfd3553676a19e2992cff41d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The comment claims that we'd only support basic Tgetattr fields. This is
no longer true, so remove this comment.
Fixes: e06a765efbe3 ("hw/9pfs: Add st_gen support in getattr reply") Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <fb364d12045217a4c6ccd0dd6368103ddb80698b.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit 3bc4db44430f53387d17145bb52b330a830a03fe) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After removing a file from the file system, we should still be able to
work with the file if we already had it open before removal.
As a first step we verify that it is possible to write to an unlinked
file, as this is what already works. This test is extended later on
after having fixed other use cases after unlink that are not working
yet.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <3d6449d4df25bcdd3e807eff169f46f1385e5257.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit 462db8fb1d405391b83a0d3099fdb9bfb85c2d92) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fix, pick it to stable so the next patch in this place applies)
'Tgetattr' 9p request and its 'Rgetattr' response types are already used
by test client, however this response type is yet missing in function
rmessage_name(), so add it.
Fixes: a6821b828404 ("tests/9pfs: compare QIDs in fs_walk_none() test") Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <e183da80d390cfd7d55bdbce92f0ff6e3e5cdced.1732465720.git.qemu_oss@crudebyte.com>
(cherry picked from commit 4ec984965079b51a9afce339af75edea6de973a2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Guenter Roeck [Tue, 28 Feb 2023 17:11:29 +0000 (09:11 -0800)]
scsi: megasas: Internal cdbs have 16-byte length
Host drivers do not necessarily set cdb_len in megasas io commands.
With commits 6d1511cea0 ("scsi: Reject commands if the CDB length
exceeds buf_len") and fe9d8927e2 ("scsi: Add buf_len parameter to
scsi_req_new()"), this results in failures to boot Linux from affected
SCSI drives because cdb_len is set to 0 by the host driver.
Set the cdb length to its actual size to solve the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Link: https://lore.kernel.org/r/20230228171129.4094709-1-linux@roeck-us.net Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 3abb67323aeecf06a27191076ab50424ec21f334) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jakub Jelen [Wed, 13 Nov 2024 12:55:23 +0000 (12:55 +0000)]
ssh: Do not switch session to non-blocking mode
The libssh does not handle non-blocking mode in SFTP correctly. The
driver code already changes the mode to blocking for the SFTP
initialization, but for some reason changes to non-blocking mode.
This used to work accidentally until libssh in 0.11 branch merged
the patch to avoid infinite looping in case of network errors:
Since then, the ssh driver in qemu fails to read files over SFTP
as the first SFTP messages exchanged after switching the session
to non-blocking mode return SSH_AGAIN, but that message is lost
int the SFTP internals and interpretted as SSH_ERROR, which is
returned to the caller:
This is indeed an issue in libssh that we should address in the
long term, but it will require more work on the internals. For
now, the SFTP is not supported in non-blocking mode.
Fixes: https://gitlab.com/libssh/libssh-mirror/-/issues/280 Signed-off-by: Jakub Jelen <jjelen@redhat.com> Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-ID: <20241113125526.2495731-1-rjones@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit fbdea3d6c13d5a75895c287a004c6f1a6bf6c164) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Tue, 19 Nov 2024 12:03:53 +0000 (13:03 +0100)]
qdev: Fix set_pci_devfn() to visit option only once
pci_devfn properties accept either a string or an integer as input. To
implement this, set_pci_devfn() first tries to visit the option as a
string, and if that fails, it visits it as an integer instead. While the
QemuOpts visitor happens to accept this, it is invalid according to the
visitor interface. QObject input visitors run into an assertion failure
when this is done.
QObject input visitors are used with the JSON syntax version of -device
on the command line:
The proper way to accept both strings and integers is using the
alternate mechanism, which tells us the type of the input before it's
visited. With this information, we can directly visit it as the right
type.
This fixes set_pci_devfn() by using the alternate mechanism.
Cc: qemu-stable@nongnu.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20241119120353.57812-1-kwolf@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 5102f9df4a9a7adfbd902f9515c3f8f53dba288e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Akihiko Odaki [Fri, 22 Nov 2024 05:03:08 +0000 (14:03 +0900)]
virtio-net: Fix size check in dhclient workaround
work_around_broken_dhclient() accesses IP and UDP headers to detect
relevant packets and to calculate checksums, but it didn't check if
the packet has size sufficient to accommodate them, causing out-of-bound
access hazards. Fix this by correcting the size requirement.
Fixes: 1d41b0c1ec66 ("Work around dhclient brokenness") Cc: qemu-stable@nongnu.org Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit a8575f7fb2f213e6690b23160b04271d47fdfaa8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
cirrus-ci: Remove MSYS2 jobs duplicated with gitlab-ci
- Various developers are reluctant to git Cirrus-CI the permissions
requested to access their GitHub account.
- When we use the cirrus-run script to trigger Cirrus-CI job from
GitLab-CI, the GitLab-CI job is restricted to a 1h timeout
(often not enough).
- Although Cirrus-CI VMs are more powerful than GitLab-CI ones,
its free plan is limited in 2 concurrent jobs.
- The GitLab-CI MSYS2 jobs are a 1:1 mapping with the Cirrus-CI ones
(modulo the environment caching).
Reduce the maintenance burden by removing the Cirrus-CI config file,
keeping the GitLab-CI jobs.
Update Yonggang Luo's maintenance file list to the new file, which
use the same environment shell.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230322135721.61138-3-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit da80f11efeea451eaa00e347f722d867ed9ac5be) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: ignore previous changes in .cirrus.yml since it is being removed anyway)
Peter Maydell [Tue, 19 Nov 2024 13:02:07 +0000 (13:02 +0000)]
hw/intc/loongarch_extioi: Use set_bit32() and clear_bit32() for s->isr
In extioi_setirq() we try to operate on a bit array stored as an
array of uint32_t using the set_bit() and clear_bit() functions
by casting the pointer to 'unsigned long *'.
This has two problems:
* the alignment of 'uint32_t' is less than that of 'unsigned long'
so we pass an insufficiently aligned pointer, which is
undefined behaviour
* on big-endian hosts the 64-bit 'unsigned long' will have
its two halves the wrong way around, and we will produce
incorrect results
The undefined behaviour is shown by the clang undefined-behaviour
sanitizer when running the loongarch64-virt functional test:
/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/bitops.h:41:5: runtime error: store to misaligned address 0x555559745d9c for type 'unsigned long', which requires 8 byte alignment
0x555559745d9c: note: pointer points here
ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
#0 0x555556fb81c4 in set_bit /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/bitops.h:41:9
#1 0x555556fb81c4 in extioi_setirq /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/intc/loongarch_extioi.c:65:9
#2 0x555556fb6e90 in pch_pic_irq_handler /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/intc/loongarch_pch_pic.c:75:5
#3 0x555556710265 in serial_ioport_write /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/clang/../../hw/char/serial.c
Fix these problems by using set_bit32() and clear_bit32(),
which work with bit arrays stored as an array of uint32_t.
Cc: qemu-stable@nongnu.org Fixes: cbff2db1e92f8759 ("hw/intc: Add LoongArch extioi interrupt controller(EIOINTC)") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-id: 20241108135514.4006953-4-peter.maydell@linaro.org
(cherry picked from commit 335be5bc44aa6800a9e3ba5859ea3833cfe5a7bc) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: drop hunk in hw/intc/loongarch_extioi.c:extioi_update_sw_coremap()
due to missing v8.2.0-548-g428a6ef4396a "hw/intc/loongarch_extioi: Add vmstate post_load support")
Peter Maydell [Tue, 19 Nov 2024 13:02:06 +0000 (13:02 +0000)]
bitops.h: Define bit operations on 'uint32_t' arrays
Currently bitops.h defines a set of operations that work on
arbitrary-length bit arrays. However (largely because they
originally came from the Linux kernel) the bit array storage is an
array of 'unsigned long'. This is OK for the kernel and even for
parts of QEMU where we don't really care about the underlying storage
format, but it is not good for devices, where we often want to expose
the storage to the guest and so need a type that is not
variably-sized between host OSes.
We already have a workaround for this in the GICv3 model:
arm_gicv3_common.h defines equivalents of the bit operations that
work on uint32_t. It turns out that we should also be using
something similar in hw/intc/loongarch_extioi.c, which currently
casts a pointer to a uint32_t array to 'unsigned long *' in
extio_setirq(), which is both undefined behaviour and not correct on
a big-endian host.
Define equivalents of the set_bit() function family which work
with a uint32_t array.
(Cc stable because we're about to provide a bugfix to
loongarch_extioi which will depend on this commit.)
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241108135514.4006953-2-peter.maydell@linaro.org
(cherry picked from commit 3d7680fb18c7b17701730589d241a32e85f763a3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 19 Nov 2024 13:02:05 +0000 (13:02 +0000)]
hw/intc/openpic: Avoid taking address of out-of-bounds array index
The clang sanitizer complains about the code in the EOI handling
of openpic_cpu_write_internal():
UBSAN_OPTIONS=halt_on_error=1:abort_on_error=1 ./build/clang/qemu-system-ppc -M mac99,graphics=off -display none -kernel day15/invaders.elf
../../hw/intc/openpic.c:1034:16: runtime error: index -1 out of bounds for type 'IRQSource[264]' (aka 'struct IRQSource[264]')
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior ../../hw/intc/openpic.c:1034:16 in
This is because we do
src = &opp->src[n_IRQ];
when n_IRQ may be -1. This is in practice harmless because if n_IRQ
is -1 then we don't do anything with the src pointer, but it is
undefined behaviour. (This has been present since this device
was first added to QEMU.)
Rearrange the code so we only do the array index when n_IRQ is not -1.
Cc: qemu-stable@nongnu.org Fixes: e9df014c0b ("Implement embedded IRQ controller for PowerPC 6xx/740 & 75") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20241105180205.3074071-1-peter.maydell@linaro.org
(cherry picked from commit 3bf7dcd47a3da0e86a9347ce5b2b5d5a1dcb5857) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Guenter Roeck [Tue, 12 Nov 2024 17:01:52 +0000 (09:01 -0800)]
usb-hub: Fix handling port power control messages
The ClearPortFeature control message fails for PORT_POWER because there
is no break; at the end of the case statement, causing it to fall through
to the failure handler. Add the missing break; to solve the problem.
Fixes: 1cc403eb21 ("usb-hub: emulate per port power switching") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20241112170152.217664-11-linux@roeck-us.net> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit b2cc69997924b651c0c6f4037782e25f2e438715) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Thu, 14 Nov 2024 12:53:18 +0000 (13:53 +0100)]
hw/audio/hda: fix memory leak on audio setup
When SET_STREAM_FORMAT is called, the st->buft timer is overwritten, thus
causing a memory leak. This was originally fixed in commit 816139ae6a5
("hw/audio/hda: fix memory leak on audio setup", 2024-11-14) but that
caused the audio to break in SPICE.
Fortunately, a simpler fix is possible. The timer only needs to be
reset, because the callback is always the same (st->output is set at
realize time in hda_audio_init); call to timer_new_ns overkill. Replace
it with timer_del and only initialize the timer once; for simplicity,
do it even if use_timer is false.
An even simpler fix would be to free the old time in hda_audio_setup().
However, it seems better to place the initialization of the timer close
to that of st->ouput.
Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20241114125318.1707590-3-pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 626b39006d2f9b1378a04cb88a2187bb852cb055) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Thu, 14 Nov 2024 10:46:53 +0000 (11:46 +0100)]
hw/misc/mos6522: Fix bad class definition of the MOS6522 device
When compiling QEMU with --enable-cfi, the "q800" m68k machine
currently crashes very early, when the q800_machine_init() function
tries to wire the interrupts of the "via1" device.
This happens because TYPE_MOS6522_Q800_VIA1 is supposed to be a
proper SysBus device, but its parent (TYPE_MOS6522) has a mistake
in its class definition where it is only derived from DeviceClass,
and not from SysBusDeviceClass, so we end up in funny memory access
issues here. Using the right class hierarchy for the MOS6522 device
fixes the problem.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2675 Signed-off-by: Thomas Huth <thuth@redhat.com> Fixes: 51f233ec92 ("misc: introduce new mos6522 VIA device") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-ID: <20241114104653.963812-1-thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit c3d7c18b0d616cf7fb3c1f325503e1462307209d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 15 Nov 2024 17:25:15 +0000 (17:25 +0000)]
tcg: Allow top bit of SIMD_DATA_BITS to be set in simd_desc()
In simd_desc() we create a SIMD descriptor from various pieces
including an arbitrary data value from the caller. We try to
sanitize these to make sure everything will fit: the 'data' value
needs to fit in the SIMD_DATA_BITS (== 22) sized field. However we
do that sanitizing with:
tcg_debug_assert(data == sextract32(data, 0, SIMD_DATA_BITS));
This works for the case where the data is supposed to be considered
as a signed integer (which can then be returned via simd_data()).
However, some callers want to treat the data value as unsigned.
Specifically, for the Arm SVE operations, make_svemte_desc()
assembles a data value as a collection of fields, and it needs to use
all 22 bits. Currently if MTE is enabled then its MTEDESC SIZEM1
field may have the most significant bit set, and then it will trip
this assertion.
Loosen the assertion so that we only check that the data value will
fit into the field in some way, either as a signed or as an unsigned
value. This means we will fail to detect some kinds of bug in the
callers, but we won't spuriously assert for intentional use of the
data field as unsigned.
Cc: qemu-stable@nongnu.org Fixes: db432672dc50e ("tcg: Add generic vector expanders")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2601 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20241115172515.1229393-1-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 8377e3fb854d126ba10e61cb6b60885af8443ad4) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Helge Deller [Tue, 5 Nov 2024 15:15:24 +0000 (16:15 +0100)]
linux-user: Fix setreuid and setregid to use direct syscalls
The commit fd6f7798ac30 ("linux-user: Use direct syscalls for setuid(),
etc") added direct syscall wrappers for setuid(), setgid(), etc since the
system calls have different semantics than the libc functions.
Add and use the corresponding wrappers for setreuid and setregid which
were missed in that commit.
This fixes the build of the debian package of the uid_wrapper library
(https://cwrap.org/uid_wrapper.html) when running linux-user.
Cc: qemu-stable@nongnu.org Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <Zyo2jMKqq8hG8Pkz@p100> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
(cherry picked from commit 8491026a08b417b2d4070f7c373dcb43134c5312) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alexander Graf [Wed, 6 Nov 2024 15:43:29 +0000 (15:43 +0000)]
target/i386: Fix legacy page table walk
Commit b56617bbcb4 ("target/i386: Walk NPT in guest real mode") added
logic to run the page table walker even in real mode if we are in NPT
mode. That function then determined whether real mode or paging is
active based on whether the pg_mode variable was 0.
Unfortunately pg_mode is 0 in two situations:
1) Paging is disabled (real mode)
2) Paging is in 2-level paging mode (32bit without PAE)
That means the walker now assumed that 2-level paging mode was real
mode, breaking NetBSD as well as Windows XP.
To fix that, this patch adds a new PG flag to pg_mode which indicates
whether paging is active at all and uses that to determine whether we
are in real mode or not.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2654 Fixes: b56617bbcb4 ("target/i386: Walk NPT in guest real mode") Fixes: 253c0a06e03 (commit b56617bbcb4 in stable-7.2.x series) Signed-off-by: Alexander Graf <graf@amazon.com> Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Link: https://lore.kernel.org/r/20241106154329.67218-1-graf@amazon.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 8fa11a4df344f58375eb26b3b65004345f21ef37) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A bad (broken or malicious) 9p client (guest) could cause QEMU host to
crash by sending a 9p 'Treaddir' request with a numeric file ID (FID) that
was previously opened for a file instead of an expected directory:
#0 0x0000762aff8f4919 in __GI___rewinddir (dirp=0xf) at
../sysdeps/unix/sysv/linux/rewinddir.c:29
#1 0x0000557b7625fb40 in do_readdir_many (pdu=0x557bb67d2eb0,
fidp=0x557bb67955b0, entries=0x762afe9fff58, offset=0, maxsize=131072,
dostat=<optimized out>) at ../hw/9pfs/codir.c:101
#2 v9fs_co_readdir_many (pdu=pdu@entry=0x557bb67d2eb0,
fidp=fidp@entry=0x557bb67955b0, entries=entries@entry=0x762afe9fff58,
offset=0, maxsize=131072, dostat=false) at ../hw/9pfs/codir.c:226
#3 0x0000557b7625c1f9 in v9fs_do_readdir (pdu=0x557bb67d2eb0,
fidp=0x557bb67955b0, offset=<optimized out>,
max_count=<optimized out>) at ../hw/9pfs/9p.c:2488
#4 v9fs_readdir (opaque=0x557bb67d2eb0) at ../hw/9pfs/9p.c:2602
That's because V9fsFidOpenState was declared as union type. So the
same memory region is used for either an open POSIX file handle (int),
or a POSIX DIR* pointer, etc., so 9p server incorrectly used the
previously opened (valid) POSIX file handle (0xf) as DIR* pointer,
eventually causing a crash in glibc's rewinddir() function.
Root cause was therefore a missing check in 9p server's 'Treaddir'
request handler, which must ensure that the client supplied FID was
really opened as directory stream before trying to access the
aforementioned union and its DIR* member.
Cc: qemu-stable@nongnu.org Fixes: d62dbb51f7 ("virtio-9p: Add fidtype so that we can do type ...") Reported-by: Akihiro Suda <suda.kyoto@gmail.com> Tested-by: Akihiro Suda <suda.kyoto@gmail.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1t8GnN-002RS8-E2@kylie.crudebyte.com>
(cherry picked from commit 042b4ebfd2298ae01553844124f27d651cdb1071) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
projects / thirdparty / qemu.git / log
