Eric Botcazou [Thu, 6 Nov 2025 19:42:13 +0000 (20:42 +0100)]
Ada: Fix function call in object notation incorrectly rejected
This happens in the name of a procedure call, again when there
is an implicit dereference in this name, and the fix to apply to
Find_Selected_Component is again straightforward:
--- a/gcc/ada/sem_ch8.adb
+++ b/gcc/ada/sem_ch8.adb
@@ -8524,9 +8524,7 @@ package body Sem_Ch8 is
-- Error if the prefix is procedure or entry, as is P.X
if Ekind (P_Name) /= E_Function
- and then
- (not Is_Overloaded (P)
- or else Nkind (Parent (N)) = N_Procedure_Call_Statement)
+ and then not Is_Overloaded (P)
then
-- Prefix may mention a package that is hidden by a local
-- declaration: let the user know. Scan the full homonym
But this also changes the diagnostics in illegal cases because they are not
uniform in the procedure, so the change also factors them out so as to make
them uniform, which slightly improves them in the end.
gcc/ada/
PR ada/113352
* sem_ch4.adb (Diagnose_Call): Tweak error message.
* sem_ch8.adb (Find_Selected_Component): Remove bypass for calls
to procedures in the overloaded overloadable case. Factor out
the diagnostics code and invoke it uniformly in this case.
gcc/testsuite/
* gnat.dg/prefix3.adb: New test.
* gnat.dg/prefix3_pkg.ads: New helper.
* gnat.dg/prefix3_pkg.adb: Likewise.
Due to some quirks in crtstuff.c, attribute "retain" requires
some features that avr doesn't implement -- even though it
doesnt't even use crtstuff. This patch works around that.
PR target/122516
gcc/
* config/avr/elf.h (SUPPORTS_SHF_GNU_RETAIN): Define if
HAVE_GAS_SHF_GNU_RETAIN.
In particular note insn 34, 42 and 43. Those are useless. Insns 36, 37, 38
are just a single bit extraction from a variable location (from one of the
if-converted blocks). I couldn't see a good way to fix the problem with insn
34/insn 42. The desire to make the then/else blocks independent is cmove_arith
is good, what's unclear is whether or not that code really cares about the
*destination* of the then/else blocks. But I set that aside.
We then thought that cleaning up the variable bit extraction would be the way
to go. So a pattern was constructed to match that form of variable bit extract
and the cost model was twiddled to return that it was a single fast
instruction. But even with those changes fwprop1 refused to make the
substitution. Sigh. At least combine recognizes the idiom later and cleans it
up.
Then we realized we really should just ignore the (set (reg) (const_int 0)) in
the if-converted sequence. We're going to be able to propagate that away in
nearly every case since we have a hard-wired zero register. Sure enough,
ignoring that insn was enough to tip the balance on this case and we get the
desired code.
Tested on riscv32-elf and riscv64-elf. Pioneer bootstrap is in flight, though
it won't really exercise this problem. The BPI's build hasn't started yet, so
it'll be at least 27hours before it's done.
Waiting on pre-commit CI before moving forward.
gcc/
* config/riscv/riscv.cc (riscv_noce_conversion_profitable_p): Ignore
assignments of (const_int 0) to a register. They will get propagated
away.
gcc/testsuite
* gcc.target/riscv/czero-bext.c: New test.
Eric Botcazou [Thu, 6 Nov 2025 19:03:49 +0000 (20:03 +0100)]
Ada: Fix incorrect renaming of primitive subprogram in object notation
It is possible to declare a subprogram renaming whose name is a primitive
subprogram in object notation; in this case, the name is unconditionally
evaluated in the front-end (unlike for objects) so that, if an ad-hoc body
needs to be built for the renaming later, the name is not reevaluated for
every call to it.
This evaluation is skipped if the name contains an implicit dereference,
as reported in the first PR, and the fix is to make the dereference explicit
at the end of the processing done in Analyze_Renamed_Primitive_Operation,
as is done in the sibling procedure Analyze_Renamed_Entry. The patch also
makes a few consistency tweaks to them and also replaces a manual evaluation
of the name in Expand_N_Subprogram_Renaming_Declaration by a simple call to
Evaluate_Name, which is the procedure used for object renamings.
Analyze_Renamed_Primitive_Operation performs the resolution of the name
based on the declared profile, but it does not do that correctly in all
cases, as reported in the second PR; the fix is again straightforward.
gcc/ada/
PR ada/113350
PR ada/113551
* exp_ch2.adb (Expand_Renaming): Fix reference to Evaluate_Name.
* exp_ch8.adb (Expand_N_Subprogram_Renaming_Declaration): Call
Evaluate_Name to evaluate the name.
* sem_ch8.adb (Analyze_Renamed_Entry): Minor tweaks.
(Analyze_Renamed_Family_Member): Likewise.
(Analyze_Renamed_Primitive_Operation): Likewise.
Fix thinko in the function checking profile conformance, save the
result of the resolution and make implicit dereferences explicit.
gcc/testsuite
* gnat.dg/renaming19.adb: New test.
* gnat.dg/renaming19_pkg.ads: New helper.
* gnat.dg/renaming19_pkg.adb: Likewise.
AVR: AVR-SD: Put a valid opcode prior to gs() table in .subsection 1.
On functional safety devices (AVR-SD), each executed instruction must
be followed by a valid opcode. This is because instruction fetch and
decode for the next instruction runs while the 2-stage pipeline is
executing the current instruction.
There is only one case where avr-gcc generates code interspersed with
data, which is when a switch/case table is generated for a function
with a "section" attribute and AVR_HAVE_JMP_CALL. In that case, the
table with the gs() code label addresses is put in .subsection 1 so
that it belongs to the section as specified by the "section" attribute.
gcc/
* config/avr/avr.cc (avr_output_addr_vec): Output
a valid opcode prior to the first gs() label provided:
- The code is compiled for an arch that has AVR-SD mcus, and
- the function has a "section" attribute, and
- the function has a gs() label addresses switch/case table.
Your Name [Thu, 6 Nov 2025 16:50:22 +0000 (09:50 -0700)]
[RISC-V][PR 121136] Improve various tests which only need to examine upper bits in a GPR
So pre-commit CI flagged an issue with the initial version of this patch. In
particular the cmp-mem-const-{1,2} tests are failing.
I didn't see that in my internal testing, but that well could be an artifact of
having multiple patches touching in the same broad space that the tester is
evaluating. If I apply just this patch I can trigger the cmp-mem-const{1,2}
failures.
The code we're getting now is actually better than we were getting before, but
the new patterns avoid the path through combine that emits the message about
narrowing the load down to a byte load, hence the failure.
Given we're getting better code now than before, I'm just skipping this test on
risc-v. That's the only non-whitespace change since the original version of
this patch.
--
This addresses the first level issues seen in generating better performing code
for testcases derived from pr121136. It likely regresses code size in some
cases as in many cases it selects code sequences that should be better
performing, though larger to encode.
Improving -Os code generation should remain the primary focus of pr121136. Any
improvements in code size with this change are a nice side effect, but not the
primary goal.
--
Let's take this test (derived from the PR):
_Bool func1_0x1U (unsigned int x) { return x <= 0x1U; }
Those should produce the same output. We currently get these fragments for the
3 cases. In particular note how the second variant is a two instruction
sequence.
sltiu a0,a0,2
srliw a0,a0,1
seqz a0,a0
sltiu a0,a0,2
This patch will adjust that second sequence to match the first and third and is
optimal.
Let's take another case. This is interesting as it's right at the simm12
border:
_Bool func1_0x7ffU (unsigned long x) { return x <= 0x7ffU; }
In this case the second sequence is pretty good. Not perfect, but clearly
better than the other two. This patch will fix the code for case #1 and case
So anyway, that's the basic motivation here. So to be 100% clear, while the
bug is focused on code size, I'm focused on the performance of the resulting
code.
This has been tested on riscv32-elf and riscv64-elf. It's also bootstrapped
and regression tested on the Pioneer. The BPI won't have results for this
patch until late tomorrow.
--
PR rtl-optimization/121136
gcc/
* config/riscv/riscv.md: Add define_insn to test the
upper bits of a register against zero using sltiu when
the bits are extracted via zero_extract or logial right shift.
Add 3->2 define_splits for gtu/leu cases testing upper bits
against zero.
gcc/testsuite
* gcc.target/riscv/pr121136.c: New test.
* gcc.dg/cmp-mem-const-1.c: Skip for risc-v.
* gcc.dg/cmp-mem-const-2.c: Likewise.
Robert Dubner [Thu, 6 Nov 2025 12:26:18 +0000 (07:26 -0500)]
cobol: Mainly extends compilation and execution in finternal-ebcdic.
We expanded our extended testing regime to execute many testcases in
EBCDIC mode as well as in ASCII. This exposed hundreds of problems in
both compilation (where conversions must be made between the ASCII
source code and the EBCDIC execution environment) and in run-time
functionality, where results from calls to system routines and internal
calculations that must be done in ASCII have to be converted to EBCDIC.
These changes also switch to using FIXED_WIDE_INT(128) instead of
REAL_VALUE_TYPE when initializing fixed-point COBOL variable types.
This provides for accurate initialization up to 37 digits, instead of
losing accuracy after 33 digits.
These changes also support the implementation of the COBOL DELETE FILE
(Format 2) statement.
These changes also introduce expanded support for specifying character
encodings, including support for locales.
co-authored-by: Robert Dubner <rdubner@symas.com>
co-authored-by: James K. Lowden <jklowden@cobolworx.com>
gcc/cobol/ChangeLog:
* Make-lang.in: Repair documentation generation.
* cdf.y: Changes to tokens.
* cobol1.cc (cobol_langhook_handle_option): Add comment.
* genapi.cc (function_pointer_from_name): Use data.original() for
function name.
(parser_initialize_programs): Likewise.
(cobol_compare): Make sure encodings of comparands are the same.
(move_tree): Change name of DEFAULT_SOURCE_ENCODING macro.
(parser_enter_program): Typo.
(psa_FldLiteralN): Break out dirty_to_binary() support routine.
(dirty_to_binary): Likewise.
(parser_alphabet): Rename 'alphabet' to 'collation_sequence'.
(parser_allocate): Change wsclear() to be uint32_t instead of char.
(parser_label_label): Formatting.
(parser_label_goto): Likewise.
(get_the_filename): Breakout get_the_filename(), which handles
encoding.
(parser_file_open): Likewise.
(set_up_delete_file_label): Implement DELETE FILE (Format 2).
(parser_file_delete_file): Likewise.
(parser_file_delete_on_exception): Likewise.
(parser_file_delete_not_exception): Likewise.
(parser_file_delete_end): Likewise.
(parser_call): Use data.original().
(parser_entry): Use data.original().
(mh_source_is_literalN): Convert from
sourceref.field->codeset.encoding.
(binary_initial_from_float128): Change to "binary_initial".
(binary_initial): Calculate in FIXED_WIDE_INT(128) instead of
REAL_VALUE_TYPE.
(digits_from_int128): New routine uses binary_initial.
(digits_from_float128): Removed. Kept as comment for reference.
(initial_from_initial): Use binary_initial.
(actually_create_the_static_field): Use correct encoding.
(parser_symbol_add): Likewise.
* genapi.h (parser_file_delete_file): Implement FILE DELETE.
(parser_file_delete_on_exception): Implement FILE DELETE.
(parser_file_delete_not_exception): Implement FILE DELETE.
(parser_file_delete_end): Implement FILE DELETE.
* genmath.cc: Include charmaps.h.
* genutil.cc (get_literal_string): Change name of
DEFAULT_SOURCE_ENCODING macro.
* parse.y: Token changes; numerous changes in support of encoding;
support for DELETE FILE.
* parse_ante.h (name_of): Use data.original().
(class prog_descr_t): Support of locales.
(current_options): Formatting.
(current_encoding): Formatting.
(current_program_index): Formatting.
(current_section): Formatting.
(current_paragraph): Formatting.
(is_integer_literal): Use correct encoding.
(value_encoding_check): Handle encoding changes.
(alphabet_add): Likewise.
(data_division_ready): Likewise.
* scan.l: Use data.original().
* show_parse.h: Use correct encoding.
* symbols.cc (elementize): Likewise.
(symbol_elem_cmp): Handle locale.
(struct symbol_elem_t): Likewise.
(symbol_locale): Likewise.
(field_str): Change DEFAULT_SOURCE_ENCODING macro name.
(symbols_alphabet_set): Formatting.
(symbols_update): Modify consistency checks.
(symbol_locale_add): Locale support.
(cbl_locale_t::cbl_locale_t): Locale support.
(cbl_alphabet_t::cbl_alphabet_t): New structure.
(cbl_alphabet_t::reencode): Formatting.
(cbl_alphabet_t::assign): Change name of collation_sequence.
(cbl_alphabet_t::also): Likewise.
(new_literal_add): Anticipate the need for four-byte characters.
(guess_encoding): Eliminate.
(cbl_field_t::internalize): Refine conversion of data.initial to
specified encoding.
* symbols.h (enum symbol_type_t): Add SymLocale.
(struct cbl_field_data_t): Incorporate data.orig.
(struct cbl_field_t): Likewise.
(struct cbl_delete_file_t): New structure.
(struct cbl_label_t): Incorporate cbl_delete_file_t.
(struct cbl_locale_t): Support for locale.
(hex_decode): Comment.
(struct cbl_alphabet_t): Incorporate locale; change variable name
to collation_sequence.
(struct symbol_elem_t): Incorporate locale.
(cbl_locale_of): Likewise.
(cbl_alphabet_of): Likewise.
(symbol_locale_add): Likewise.
(wsclear): Type is now uint32_t instead of char.
* util.cc (symbol_type_str): Incorporate locale.
(cbl_field_t::report_invalid_initial_value): Change test so that
pure PIC A() variables are limited to [a-zA-Z] and space.
(valid_move): Use DEFAULT_SOURCE_ENCODING macro.
(cobol_filename): Formatting.
Richard Biener [Mon, 3 Nov 2025 13:04:55 +0000 (14:04 +0100)]
SSA immediate use iterator checking
The following implements additional checking around
SSA immediate use iteration. Specifically this prevents
- any nesting of FOR_EACH_IMM_USE_STMT inside another iteration
via FOR_EACH_IMM_USE_STMT or FOR_EACH_IMM_USE_FAST when iterating
on the same SSA name
- modification (for now unlinking of immediate uses) of a SSA
immediate use list when a fast iteration of the immediate uses
of the SSA name is active
- modification (for now unlinking of immediate uses) of the immediate
use list outside of the block of uses for the currently active stmt
of an ongoing FOR_EACH_IMM_USE_STMT of the SSA name
To implement this additional bookkeeping members are put into the
SSA name structure when ENABLE_GIMPLE_CHECKING is active. I have
kept the existing consistency checking of the fast iterator.
* ssa-iterators.h (imm_use_iterator::name): Add.
(delink_imm_use): When in a FOR_EACH_IMM_USE_STMT iteration
enforce we only remove uses from the current stmt.
(end_imm_use_stmt_traverse): Reset current stmt.
(first_imm_use_stmt): Assert no FOR_EACH_IMM_USE_STMT on
var is in progress. Set the current stmt.
(next_imm_use_stmt): Set the current stmt.
(auto_end_imm_use_fast_traverse): New, lower iteration
depth upon destruction.
(first_readonly_imm_use): Bump the iteration depth.
* tree-core.h (tree_ssa_name::active_iterated_stmt,
tree_ssa_name::fast_iteration_depth): New members when
ENABLE_GIMPLE_CHECKING.
* tree-ssanames.cc (make_ssa_name_fn): Initialize
immediate use verifier bookkeeping members.
Richard Biener [Fri, 31 Oct 2025 12:08:05 +0000 (13:08 +0100)]
Make FOR_EACH_IMM_USE_STMT work w/o fake imm use node
This is an attempt to fix PR122502 by making a FOR_EACH_IMM_USE_FAST
with in an FOR_EACH_IMM_USE_STMT on _the same_ VAR work without
the former running into the FOR_EACH_IMM_USE_STMT inserted marker
use operand. It does this by getting rid of the marker.
The downside is that this in principle restricts the set of operations
that can be done on the immediate use list of VAR. Where previously
almost anything was OK (but technically not well-defined what happens
to the iteration) after this patch you may only remove immediate
uses of VAR on the current stmt from the FOR_EACH_IMM_USE_STMT
iteration. In particular things will break if you happen to remove
the one immediate use of VAR on the stmt immediately following
the set of immediate uses on the currrent stmt.
Additional checking to combat such cases is implemented in a
followup.
PR tree-optimization/122502
* ssa-iterators.h (imm_use_iterator::iter_node): Remove.
(imm_use_iterator::next_stmt_use): New.
(next_readonly_imm_use): Adjust checking code.
(end_imm_use_stmt_traverse): Simplify.
(link_use_stmts_after): Likewise. Return the last use
with the same stmt.
(first_imm_use_stmt): Simplify. Set next_stmt_use.
(next_imm_use_stmt): Likewise.
(end_imm_use_on_stmt_p): Adjust.
This effective-target does not need to check for arm32, but needs to
force -march=armv8-a, otherwise -mfpu=fp-armv8 has no useful meaning.
While fixing that, introduce
check_effective_target_arm_v8_vfp_ok_nocache, so that arm_v8_vfp_ok
behaves like arm_v8_neon_ok and many other effective-targets.
Without this patch, gcc.target/arm/attr-neon.c fails with a toolchain
configured with --with-mode=thumb --with-cpu=cortex-m0
--with-float=soft because arm_v8_vfp returns "" because arm32 is
false. As a result, the testcase is compiled with the options needed
for arm_neon_ok, which generates an extra ".fpu neon" directive
compared to what is expected.
The patch removes -march=armv8-a from dg-options in lceil-vcvt_1.c,
lfloor-vcvt_1.c lround-vcvt_1.c and vrinta-ce.c, because this could
override what arm_v8_vfp_ok detected (and lead to 'error: selected
architecture lacks an FPU').
With this patch, the test passes, and several others are enabled:
gcc.target/arm/lceil-vcvt_1.c
gcc.target/arm/lfloor-vcvt_1.c
gcc.target/arm/lround-vcvt_1.c
gcc.target/arm/pr69135_1.c
gcc.target/arm/vmaxnmdf.c
gcc.target/arm/vmaxnmsf.c
gcc.target/arm/vminnmdf.c
gcc.target/arm/vminnmsf.c
gcc.target/arm/vrinta-ce.c
gcc.target/arm/vrintaf32.c
gcc.target/arm/vrintaf64.c
gcc.target/arm/vrintmf32.c
gcc.target/arm/vrintmf64.c
gcc.target/arm/vrintpf32.c
gcc.target/arm/vrintpf64.c
gcc.target/arm/vrintrf32.c
gcc.target/arm/vrintrf64.c
gcc.target/arm/vrintxf32.c
gcc.target/arm/vrintxf64.c
gcc.target/arm/vrintzf32.c
gcc.target/arm/vrintzf64.c
gcc.target/arm/vseleqdf.c
gcc.target/arm/vseleqsf.c
gcc.target/arm/vselgedf.c
gcc.target/arm/vselgesf.c
gcc.target/arm/vselgtdf.c
gcc.target/arm/vselgtsf.c
gcc.target/arm/vselledf.c
gcc.target/arm/vsellesf.c
gcc.target/arm/vselltdf.c
gcc.target/arm/vselltsf.c
gcc.target/arm/vselnedf.c
gcc.target/arm/vselnesf.c
gcc.target/arm/vselvcdf.c
gcc.target/arm/vselvcsf.c
gcc.target/arm/vselvsdf.c
gcc.target/arm/vselvssf.c
gcc/testsuite/ChangeLog:
* lib/target-supports.exp
(check_effective_target_arm_v8_vfp_ok_nocache): New.
(check_effective_target_arm_v8_vfp_ok): Call the above helper, and
use global flags.
(add_options_for_arm_v8_vfp): Use et_arm_v8_vfp_flags.
* gcc.target/arm/lceil-vcvt_1.c: Remove -march=armv8-a.
* gcc.target/arm/lfloor-vcvt_1.c: Likewise.
* gcc.target/arm/lround-vcvt_1.c: Likewise.
* gcc.target/arm/vrinta-ce.c: Likewise.
Peter Damianov [Thu, 6 Nov 2025 00:14:44 +0000 (00:14 +0000)]
libiberty: Add BigObj COFF support for LTO on Windows targets [PR122472]
This patch adds support for the BigObj COFF object file format to libiberty's
simple-object-coff.c. BigObj extends regular COFF to support a 32-bit section
count.
BigObj differs from COFF in a few ways:
* A different header structure
* 32-bit section counts instead of 16-bit
* 32-bit symbol section numbers instead of 16-bit
* 20-byte symbols instead of 18-byte symbols
(due to the extended section numbers)
For a more detailed summary, read my blog post on this subject:
https://peter0x44.github.io/posts/bigobj_format_explained/
libiberty/ChangeLog:
PR target/122472
* simple-object-coff.c (struct external_filehdr_bigobj): New
structure for BigObj file header.
(bigobj_magic): New constant for BigObj magic bytes.
(struct external_syment_bigobj): New structure for BigObj
20-byte symbol table entries.
(union external_auxent_bigobj): New union for BigObj 20-byte
auxiliary symbol entries.
(struct simple_object_coff_read): Add is_bigobj flag and make
nscns 32-bit to support both formats.
(struct simple_object_coff_attributes): Add is_bigobj flag.
(simple_object_coff_match): Add BigObj format detection.
(simple_object_coff_read_strtab): Use format-specific symbol
size when calculating string table offset.
(simple_object_coff_attributes_merge): Check is_bigobj flag.
(simple_object_coff_write_filehdr_bigobj): New function.
(simple_object_coff_write_to_file): Add logic for writing
BigObj vs regular COFF format with appropriate symbol
and auxiliary entry structures.
Signed-off-by: Peter Damianov <peter0x44@disroot.org> Signed-off-by: Jonathan Yong <10walls@gmail.com>
Xi Ruoyao [Tue, 4 Nov 2025 13:03:18 +0000 (21:03 +0800)]
LoongArch: Switch the default code model to medium
It has turned out the normal code model isn't enough for some large
LoongArch link units in practice. Quoting WANG Rui's comment [1]:
We’ve actually been considering pushing for a change to the default
code model for LoongArch compilers (including GCC) for a while now.
In fact, this was one of the topics discussed in yesterday’s internal
compiler tool-chain meeting. The reason we haven’t moved forward with
it yet is that the medium code model generates a R_LARCH_CALL36
relocation, which had some issues with earlier versions of the linker.
We need to assess the impact on users before proceeding with the change.
In GCC we have build-time probe for linker call36 support and if the
linker does not support it, we fall back to pcalau12i + jirl or
la.{local,global} + jirl for the medium code model. I also had some
concern about a potential performance regression caused by the
conservative nature of the relaxation process, but when I tested this
patch it turned out the relaxation is powerful enough to eliminate all
the pcaddu18i instructions in cc1plus and libstdc++.so.
The Loong Arch Linux project has been using -mcmodel=medium in their
{C,CXX}FLAGS building packages for a while [2] and they've not reported
any issues with that.
The Linux kernel developers has already anticipated the change and
explicitly specified -mcmodel=normal for a while [3].
Thus to me it's safe to make GCC 16 the first release with the medium
code model as the default now. If someone must keep the normal code
model as the default for any reason, it's possible to configure GCC
using --with-cmodel=normal.
* config.gcc: Support --with-cmodel={medium,normal} and make
medium the default for LoongArch, define TARGET_DEFAULT_CMODEL
as the selected value.
* config/loongarch/loongarch-opts.cc: Use TARGET_DEFAULT_CMODEL
instead of hard coding CMODEL_NORMAL.
* doc/install.texi: Document that --with-cmodel= is supported
for LoongArch.
* doc/invoke.texi: Update the document about default code model
on LoongArch.
Nathaniel Shead [Sun, 2 Nov 2025 04:58:39 +0000 (15:58 +1100)]
c++/modules: Complain on imported GMF TU-local entities in instantiation [PR121574]
An unfortunate side effect of the previous patch is that even with
-pedantic-errors, unless the user specifies -Wtemplate-names-tu-local
when building the module interface there will be no diagnostic at all
from instantiating a template that exposes global TU-local entities,
either when building the module or its importer.
This patch solves this by recognising imported TU-local dependencies,
even if they weren't streamed as TU_LOCAL_ENTITY nodes. The warnings
here are deliberately conservative for when we can be sure this was
actually an imported TU-local entity; in particular, we bail on any
TU-local entity that originated from a header module, without attempting
to determine if the entity came via a named module first.
PR c++/121574
gcc/cp/ChangeLog:
* cp-tree.h (instantiating_tu_local_entity): Declare.
* module.cc (is_tu_local_entity): Extract from depset::hash.
(is_tu_local_value): Likewise.
(has_tu_local_tmpl_arg): Likewise.
(depset::hash::is_tu_local_entity): Remove.
(depset::hash::has_tu_local_tmpl_arg): Remove.
(depset::hash::is_tu_local_value): Remove.
(instantiating_tu_local_entity): New function.
(depset::hash::add_binding_entity): No longer go through
depset::hash to check is_tu_local_entity.
* pt.cc (complain_about_tu_local_entity): Remove.
(tsubst): Use instantiating_tu_local_entity.
(tsubst_expr): Likewise.
gcc/testsuite/ChangeLog:
* g++.dg/modules/internal-17_b.C: Check for diagnostics when
instantiating imported TU-local entities.
Signed-off-by: Nathaniel Shead <nathanieloshead@gmail.com> Reviewed-by: Jason Merrill <jason@redhat.com>
Nathaniel Shead [Thu, 30 Oct 2025 12:13:21 +0000 (23:13 +1100)]
c++/modules: Allow ignoring some TU-local exposure errors in GMF [PR121574]
A frequent issue with migrating to C++20 modules has been dealing with
third-party libraries with internal functions or data. This causes GCC
to currently refuse to build the module if any references to these
internal-linkage declarations escape into the module CMI.
This can seem needlessly hostile, however, especially since we have the
capabilities to support this (to a degree) from header units, albeit
with the inherent ODR issues associated with their use. In aid of this,
this patch demotes the error to a pedwarn in various scenarios, by
treating some declarations as not being TU-local even if they otherwise
would have been.
Effort has been made to not alter semantics of valid programs, and to
continue to diagnose cases that the standard says we must. In
particular, any code in the module purview is still a hard error, due to
the inherent issues with exposing TU-local entities, and the lack of any
migration requirements.
Because this patch is just to assist migration, we only deal with the
simplest (yet most common) cases: namespace scope functions and
variables. Types are hard to handle neatly as we risk getting thousands
of unhelpful warnings as we continue to walk the type body and find new
TU-local entities to complain about. Templates are also tricky because
it's hard to tell if an instantiation that occurred in the module
purview only refers to global module entities or if it's inadvertantly
exposing a purview entity as well. Neither of these are likely to occur
frequently in third-party code; if need be, this can be relaxed later as
well.
Similarly, even in the GMF a constexpr variable with a TU-local value
will not be usable in constant expressions in the importer, and since we
cannot easily warn about this from the importer we continue to make this
an error in the module interface.
PR c++/121574
gcc/c-family/ChangeLog:
* c.opt: New warning '-Wexpose-global-module-tu-local'.
* c.opt.urls: Regenerate.
* module.cc (depset::disc_bits): Replace 'DB_REFS_TU_LOCAL_BIT'
and 'DB_EXPOSURE_BIT' with new four flags
'DB_{REF,EXPOSE}_{GLOBAL,PURVIEW}_BIT'.
(depset::is_tu_local): Support checking either for only purview
TU-local entities or any entity described TU-local by standard.
(depset::refs_tu_local): Likewise.
(depset::is_exposure): Likewise.
(depset::hash::make_dependency): A constant initialized to a
TU-local variable is always considered a purview exposure.
(is_exposure_of_member_type): Adjust sanity checks to handle if
we ever relax requirements for TU-local types.
(depset::hash::add_dependency): Differentiate referencing
purview or GMF TU-local entities.
(depset::hash::diagnose_bad_internal_ref): New function.
(depset::hash::diagnose_template_names_tu_local): New function.
(depset::hash::finalize_dependencies): Handle new warnings that
might be needed for GMF TU-local entities.
gcc/testsuite/ChangeLog:
* g++.dg/modules/internal-17_a.C: New test.
* g++.dg/modules/internal-17_b.C: New test.
Signed-off-by: Nathaniel Shead <nathanieloshead@gmail.com> Reviewed-by: Jason Merrill <jason@redhat.com>
Eric Botcazou [Wed, 5 Nov 2025 20:15:35 +0000 (21:15 +0100)]
Ada: Fix qualified name of discriminant incorrectly accepted in constraint
The RM 3.8(12/3) subclause says that a discriminant mentioned in a
constraint must appear alone as a direct name. The last part is not
consistently checked and, while the first part is, it generates a
slightly different error message depending on the form of the input.
This fixes the last part and changes the first to use a single message.
gcc/ada/
PR ada/35793
* sem_res.adb (Check_Discriminant_Use): In a constraint context,
check that the discriminant appears alone as a direct name in all
cases and give a consistent error message when it does not.
gcc/testsuite/
* gnat.dg/specs/discr8.ads: New test.
Fix the unified-shared memory test,
libgomp.c++/target-std__multimap-concurrent-usm.C
added in commit r16-1010-g83ca283853f195
libgomp: Add testcases for concurrent access to standard C++ containers
on offload targets, a number of USM variants
This tests includes the actual code of target-std__multimap-concurrent.C.
The issue is that multimap.insert allocates memory – which is freed by
the destructor. However, if the memory is allocated on a device
('insert'), it also needs to be freed there ('clear') as in general
freeing device-allocated memory is not possible on the host.
libgomp/ChangeLog:
* testsuite/libgomp.c++/target-std__multimap-concurrent.C: Fix memory
freeing of device allocated memory with USM.
Paul Thomas [Wed, 5 Nov 2025 12:11:00 +0000 (12:11 +0000)]
Fortran: Fix PDT constructors in associate [PR122501, PR122524]
2025-11-05 Paul Thomas <pault@gcc.gnu.org>
gcc/fortran
PR fortran/122501
PR fortran/122524
* primary.cc (gfc_convert_to_structure_constructor): Correct
whitespace issue.
(gfc_match_rvalue): Remove the attempt to match specific procs
before filling out PDT constructor. Instead, defer this until
resolution with the condition that there not be a following
arglist and more than one procedure in the generic interface.
gcc/testsuite/
PR fortran/122501
* gfortran.dg/pdt_66.f03: New test.
PR fortran/122524
* gfortran.dg/pdt_67.f03: New test.
Artemiy Volkov [Sat, 1 Nov 2025 17:17:15 +0000 (17:17 +0000)]
forwprop: allow subvectors in simplify_vector_constructor ()
This is an attempt to fix
https://gcc.gnu.org/pipermail/gcc-patches/2025-October/697879.html in the
middle-end; the motivation in that patch was to teach gcc to compile:
foo:
dup d31, v0.d[1]
uzp1 v0.2d, v31.2d, v0.2d
ret
Instead of adding a define_insn in the backend, this patch relaxes the
precondition of tree-ssa-forwprop.cc:simplify_vector_constructor () to
accept subvectors as constructor elements. During initial argument
processing (ll. 3817-3916), subvectors are decomposed into individual
elements before populating the ELTS array; this allows the rest of the
function to remain unchanged. Special handling is also implemented for
constant and splat subvector elements of a constructor (the latter with
the use of ssa_uniform_vector_p () from tree-vect-generic.cc, which this
patch moves to tree.cc).
Add GIMPLE tests to gcc.dg/tree-ssa demonstrating the intended behavior
with various combinations of subvectors as constructor arguments,
including constant and splat subvectors; also add some aarch64-specific
tests to show that the change leads to us picking the "ext" instruction
for the resulting VEC_PERM_EXPR.
Bootstrapped and regtested on aarch64 and x86_64, regtested on aarch64_be.
gcc/ChangeLog:
* tree-ssa-forwprop.cc (simplify_vector_constructor): Support
vector constructor elements.
* tree-vect-generic.cc (ssa_uniform_vector_p): Make non-static and
move ...
* tree.cc (ssa_uniform_vector_p): ... here.
* tree.h (ssa_uniform_vector_p): Declare it.
gcc/testsuite/ChangeLog:
* gcc.dg/tree-ssa/forwprop-43.c: New test.
* gcc.target/aarch64/simd/combine_ext.c: New test.
Richard Biener [Mon, 3 Nov 2025 13:43:39 +0000 (14:43 +0100)]
Use gather_imm_use_stmts instead of FOR_EACH_IMM_USE_STMT in forwprop
The following fixes forwprop using FOR_EACH_IMM_USE_STMT to iterate
over stmts and then eventually removing the active stmt, releasing
its defs. This can cause debug stmt insertion with a RHS referencing
the SSA name we iterate over, adding to its immediate use list
but also adjusting all other debug stmts refering to the released
SSA name, updating those. And those can refer to the original
iterated over variable.
In the end the destructive behavior of update_stmt is a problem
here, which unlinks all uses of a stmt and then links in the
newly computed ones instead of leaving those in place that are.
The solution is to not rely on FOR_EACH_IMM_USE_STMT to iterate
over stmt uses without duplicates.
* tree-ssa-forwprop.cc (forward_propagate_addr_expr):
Use gather_imm_use_stmts instead of FOR_EACH_IMM_USE_STMT.
Richard Biener [Tue, 4 Nov 2025 09:48:44 +0000 (10:48 +0100)]
Add gather_imm_use_stmts helper
The following adds a helper function to gather SSA use stmts without
duplicates. It steals the only padding bit in gimple to be a
"infrastructure local flag" which should be used only temporarily
and kept cleared. I did not add accessor functions for the flag
to not encourage (ab-)uses.
I have used an auto_vec<gimple *, 2> in the API to avoid heap
allocations for most cases (without doing statistics). I have
verified GCC 7 performs NRV optimization on the copy but I'll
note while auto_vec<gimple *> has copy and assign deleted,
auto_vec<gimple *, N> does not. Adding them breaks pair-fusion.cc
compile. Without using 'auto' or range-for the API use is a bit
awkward as that exposes the number of auto-allocated elements.
The helper can be used in a range-for, see the followup for an
example.
* gimple.h (gimple::pad): Rename to ...
(gimple::ilf): ... this.
* ssa-iterators.h (gather_imm_use_stmts): Declare.
* tree-ssa-operands.cc (gather_imm_use_stmts): New function.
Richard Biener [Mon, 3 Nov 2025 12:59:36 +0000 (13:59 +0100)]
Fix unsafe stmt modifications in FOR_EACH_IMM_USE_STMT
The following fixes path isolation changing the immediate use list of
an SSA name that is currently iterated over via FOR_EACH_IMM_USE_STMT.
This happens when it duplicates a BB within this and creates/modifies
stmts that contain SSA uses of the name and calls update_stmt which
re-builds SSA operands, including removal of SSA uses and re-inserting
them. This is not safe as that might cause missed iterated uses but
more importantly could cause the 'next' use to be removed.
For the case in question the fix is to collect interesting uses in
a vec and do the processing outside of the FOR_EACH_IMM_USE_STMT
iteration.
* gimple-ssa-isolate-paths.cc (check_loadstore): Set
the volatile flag on the stmt manually.
(find_implicit_erroneous_behavior): Move code transform
outside of FOR_EACH_IMM_USE_STMT iteration.
The "vrepli.b" instruction is introduced by the init-regs pass (see
PR61810 and all the issues it references). To work it around, we can
use post-reload instead of define_expand: the "f" constraint will make
the compiler automatically move the scalar between GPR and FPR, and
reload is much later than init-regs so init-regs won't get in our way.
Now the code looks like:
movgr2fr.d $f0,$r4
vpcnt.d $vr0,$vr0
movfr2gr.d $r4,$f0
jr $r1
gcc/ChangeLog:
* config/loongarch/loongarch.md (cntmap): Change to uppercase.
(popcount<GPR:mode>2): Modify to a post reload split.
Eric Botcazou [Tue, 4 Nov 2025 18:54:45 +0000 (19:54 +0100)]
Ada: Fix incorrect legality check in instantiation of child generic unit
The problem arises when the generic unit has a formal access type parameter,
because the manual resolution implemented in Find_Actual_Type does not pick
the correct entity for the designated type. The fix replaces it with a bona
fide resolution and cleans up the associated code in the callers.
gcc/ada/
PR ada/18453
* sem_ch12.adb (Find_Actual_Type): Add Typ_Ref parameter and
perform a standard resolution on it in the fallback case.
Call Get_Instance_Of if the type is declared in a formal of
the child unit.
(Instantiate_Type.Validate_Access_Type_Instance): Adjust call
to Find_Actual_Type.
(Instantiate_Type.Validate_Array_Type_Instance): Likewise and
streamline the check for matching component subtypes.
gcc/testsuite/
* gnat.dg/specs/generic_inst9.ads: New test.
* gnat.dg/specs/generic_inst9_pkg1.ads: New helper.
* gnat.dg/specs/generic_inst9_pkg2.ads: Likewise.
* gnat.dg/specs/generic_inst9_pkg2-g.ads: Likewise.
This function acts on entire parameter declaration lists, and iterates
over them. Use plural in the name, to clarify that it acts on
parameters, not just on a single parameter.
Kees Cook [Tue, 26 Aug 2025 04:09:41 +0000 (21:09 -0700)]
arc: Add const attribute support for mathematical ARC builtins
The ARC builtin functions __builtin_arc_ffs and __builtin_arc_fls
perform pure mathematical operations equivalent to the standard
GCC __builtin_ffs function, which is marked with the const attribute.
However, the ARC target-specific versions were not marked as const,
preventing compiler optimizations like common subexpression elimination.
Extend the ARC builtin infrastructure to support function attributes
and mark the appropriate mathematical builtins as const:
- __builtin_arc_ffs: Find first set bit (const)
- __builtin_arc_fls: Find last set bit (const)
- __builtin_arc_norm: Count leading zeros (const)
- __builtin_arc_normw: Count leading zeros for 16-bit (const)
- __builtin_arc_swap: Endian swap (const)
gcc/ChangeLog:
* config/arc/builtins.def: Add ATTRS parameter to DEF_BUILTIN
macro calls. Mark mathematical builtins (FFS, FLS, NORM, NORMW,
SWAP) with attr_const, leave others as NULL_TREE.
* config/arc/arc.cc: Add support for builtin function attributes.
Create attr_const using tree_cons. Update DEF_BUILTIN macro to
pass ATTRS parameter to add_builtin_function.
gcc/testsuite/ChangeLog:
* gcc.target/arc/builtin_fls_const.c: New test. Verify that
const attribute enables CSE optimization for mathematical ARC
builtins by checking that duplicate calls are eliminated and
results are optimized to shift operations.
OpenMP/Fortran: Revamp handling of labels in metadirectives [PR122369,PR122508]
When a label is matched in the first statement after the end of a metadirective
body, it is bound to the associated region. However this prevents it from being
referenced elsewhere.
This patch fixes it by rebinding such labels to the outer region. It also
ensures that labels defined in an outer region can be referenced in a
metadirective body.
PR fortran/122369
PR fortran/122508
gcc/fortran/ChangeLog:
* gfortran.h (gfc_rebind_label): Declare new function.
* parse.cc (parse_omp_metadirective_body): Rebind labels to the outer
region. Maintain a vector of metadirective regions.
(gfc_parse_file): Initialise it.
* parse.h (GFC_PARSE_H): Declare it.
* symbol.cc (gfc_get_st_label): Look for existing labels in outer
metadirective regions.
(gfc_rebind_label): Define new function.
(gfc_define_st_label): Accept duplicate labels in metadirective body.
(gfc_reference_st_label): Accept shared DO termination labels in
metadirective body.
gcc/testsuite/ChangeLog:
* gfortran.dg/gomp/pr122369-1.f90: New test.
* gfortran.dg/gomp/pr122369-2.f90: New test.
* gfortran.dg/gomp/pr122369-3.f90: New test.
* gfortran.dg/gomp/pr122369-4.f90: New test.
* gfortran.dg/gomp/pr122508-1.f90: New test.
* gfortran.dg/gomp/pr122508-2.f90: New test.
Pan Li [Mon, 3 Nov 2025 11:27:24 +0000 (19:27 +0800)]
Match: Refactor min based unsigned SAT_MUL pattern by widen mul helper [NFC]
There are 3 kinds of widen_mul during the unsigned SAT_MUL pattern, aka
* widen_mul directly, like _3 w* _4
* convert and the widen_mul, like (uint64_t)_3 *w (uint64_t)_4
* convert and then mul, like (uint64_t)_3 * (uint64_t)_4
All of them will be referenced during different forms of unsigned
SAT_MUL pattern match, but actually we can wrap them into a helper
which present the "widening_mul" sematics. With this helper, some
unnecessary pattern and duplicated code could be eliminated.
The below test suites are passed for this patch:
1. The rv64gcv fully regression tests.
2. The x86 bootstrap tests.
3. The x86 fully regression tests.
gcc/ChangeLog:
* match.pd: Add usmul_widen_mult helper and referenced by
min based unsigned SAT_MUL pattern.
On i686, offsets into object archives could be 64-bit, but they're
inconsistently treated across the lto, which may sometimes result in
truncation of those offsets for large archives.
Use int64_t/off_t consistently across all uses of archive offsets to
make sure that they're always read and mapped correctly.
gcc/lto/ChangeLog
PR lto/122515
* lto.h (lto_section_slot): Set type of START to off_t.
* lto-common.cc (lto_read_section_data): Adjust.
* lto-object.cc (lto_obj_file_open): Set type of OFFSET to
int64_t.
gcc/ChangeLog
PR lto/122515
* lto-wrapper.cc (debug_objcopy): Set type of INOFF to int64_t.
(run_gcc): Set type of FILE_OFFSET to int64_t.
gcc/testsuite/ChangeLog
PR lto/122515
* lib/lto.exp (lto-build-archive): New procedure.
(lto-execute-1): Use it.
(lto-link-and-maybe-run, lto-get-options-main): Handle ar-link.
* gcc.dg/lto/pr122515_0.c: New test case.
* gcc.dg/lto/pr122515_1.c: New file.
* gcc.dg/lto/pr122515_2.c: Likewise.
* gcc.dg/lto/pr122515_3.c: Likewise.
* gcc.dg/lto/pr122515_4.c: Likewise.
* gcc.dg/lto/pr122515_5.c: Likewise.
* gcc.dg/lto/pr122515_6.c: Likewise.
* gcc.dg/lto/pr122515_7.c: Likewise.
* gcc.dg/lto/pr122515_8.c: Likewise.
* gcc.dg/lto/pr122515_9.c: Likewise.
Nathaniel Shead [Thu, 16 Oct 2025 11:51:23 +0000 (22:51 +1100)]
c++: Don't constrain template visibility using no-linkage variables [PR122253]
When finding the minimal visibility of a template, any reference to a
dependent automatic variable will cause the instantiation to be marked
as internal linkage. However, when processing the template decl we
don't yet know whether that should actually be the case, as a given
instantiation may not require referencing the local decl in its
mangling.
This patch fixes the issue by checking for no-linkage decls first, in
which case we just constrain using the type of the entity. We can't use
a check for lk_external/lk_internal in the other cases, as
instantiations referring to internal types can still have external
linkage as determined by the language, but should still constrain the
visibility of any declarations that refer to them.
PR c++/122253
gcc/cp/ChangeLog:
* decl2.cc (min_vis_expr_r): Don't mark no-linkage declarations
as VISIBILITY_ANON.
gcc/testsuite/ChangeLog:
* g++.dg/modules/internal-16.C: New test.
Signed-off-by: Nathaniel Shead <nathanieloshead@gmail.com> Reviewed-by: Patrick Palka <ppalka@redhat.com> Reviewed-by: Jason Merrill <jason@redhat.com>
Tobias Burnus [Tue, 4 Nov 2025 09:23:31 +0000 (10:23 +0100)]
gfortran.dg/pr122513-2.f90: New test [PR122513]
This test is from PR122513; even though the actual error message was
already added in GCC 15, there was no testcase for the diagnostic type
Index variable 'i' at (1) cannot be specified in a locality-spec
Thus, this commit adds one.
gcc/testsuite/ChangeLog:
PR fortran/122513
* gfortran.dg/pr122513-2.f90: New test.
Kishan Parmar [Tue, 4 Nov 2025 07:11:28 +0000 (12:41 +0530)]
simplify-rtx: Canonicalize SUBREG and LSHIFTRT order for AND operations
For a given rtx expression (and (lshiftrt (subreg X) shift) mask)
combine pass tries to simplify the RTL form to
(and (subreg (lshiftrt X shift)) mask)
where the SUBREG wraps the result of the shift. This leaves the AND
and the shift in different modes, which complicates recognition.
(and (lshiftrt (subreg X) shift) mask)
where the SUBREG is inside the shift and both operations share the same
mode. This form is easier to recognize across targets and enables
cleaner pattern matching.
This patch checks in simplify-rtx to perform this transformation when
safe: the SUBREG must be a lowpart, the shift amount must be valid, and
the precision of the operation must be preserved.
Tested on powerpc64le-linux-gnu, powerpc64-linux-gnu, and
x86_64-pc-linux-gnu with no regressions. On rs6000, the change reduces
insn counts due to improved matching.
2025-11-04 Kishan Parmar <kishan@linux.ibm.com>
gcc/ChangeLog:
PR rtl-optimization/93738
* simplify-rtx.cc (simplify_binary_operation_1): Canonicalize
SUBREG(LSHIFTRT) into LSHIFTRT(SUBREG) when valid.
David Malcolm [Tue, 4 Nov 2025 02:42:59 +0000 (21:42 -0500)]
analyzer: add event kinds for special control flow [PR122544]
The SARIF 3.38.8 "kinds" property has some verbs for expressing
control flow, but is missing some of the awkward special cases.
The spec says "If none of these values are appropriate, a SARIF
producer MAY use any value."
This patch adds the following new values:
* "throw" for throwing an exception
* "catch" for catching an exception
* "unwind" for unwinding stack frame(s) during exception-handling
* "setjmp" for calls to setjmp
* "longjmp" for calls to longjmp that rewind the program counter/stack
to the location of a previous setjmp call
gcc/analyzer/ChangeLog:
PR analyzer/122544
* checker-event.cc (catch_cfg_edge_event::get_meaning): New.
(setjmp_event::get_meaning): New.
(rewind_event::get_meaning): New.
(throw_event::get_meaning): New.
(unwind_event::get_meaning): New.
* checker-event.h (catch_cfg_edge_event::get_meaning): New decl.
(setjmp_event::get_meaning): New decl.
(rewind_event::get_meaning): New decl.
(throw_event::get_meaning): New decl.
(unwind_event::get_meaning): New decl.
gcc/ChangeLog:
PR analyzer/122544
* diagnostics/paths.cc (event::meaning::maybe_get_verb_str):
Handle the new verbs.
* diagnostics/paths.h (event::meaning::verb): Add new values
for special control flow operations.
(event::meaning::meaning): Add ctor taking just a verb.
gcc/testsuite/ChangeLog:
PR analyzer/122544
* g++.dg/analyzer/exception-path-1-sarif.py: New test script.
* g++.dg/analyzer/exception-path-1.C: Add SARIF output, and use
the above to check it.
* g++.dg/analyzer/exception-path-unwind-multiple-2-sarif.py: New
test script.
* g++.dg/analyzer/exception-path-unwind-multiple-2.C: Add SARIF
output, and use the above to check it.
* gcc.dg/analyzer/setjmp-3-sarif.py: New test script.
* gcc.dg/analyzer/setjmp-3.c: Add SARIF output, and use
the above to check it.
Signed-off-by: David Malcolm <dmalcolm@redhat.com>
Eric Botcazou [Mon, 3 Nov 2025 23:40:39 +0000 (00:40 +0100)]
Ada: Fix segfault for instantiation on function call returning string
The problem is that a transient scope is created during the analysis of the
actual parameters of the instantiation and this discombobulates the complex
handling of scopes in Sem_Ch12.
gcc/ada/
PR ada/78175
* sem_ch12.adb (Hide_Current_Scope): Deal with a transient scope
as current scope.
(Remove_Parent): Likewise.
gcc/testsuite/
* gnat.dg/generic_inst15.adb: New test.
* gnat.dg/generic_inst15_pkg-g.ads: New helper.
* gnat.dg/generic_inst15_pkg.ads: Likewise.
to:
movl $1, %edx
movl %esi, %ecx
xorl %eax, %eax
salq %cl, %rdx
.L4:
testq %rdx, (%rdi,%rax,8)
jne .L1
...
Also improve pentium pairing in *testqi_1_maybe_si insn pattern.
PR target/122534
gcc/ChangeLog:
* config/i386/i386.md (@test<mode>_ccno_1):
Use <general_szext_operand> as operand 1 predicate.
(testqi_ccz_1): Use general_operand as operand 1 predicate.
(*testdi_1): Use x86_64_szext_general_operand as operand 1 predicate.
(*testqi_1_maybe_si): Use general_operand as operand 1 predicate.
Add (n,*a) alternative to allow UV pairing for pentium processor.
(*test<mode>_1): Use <general_operand> as operand 1 predicate.
Jeff Law [Mon, 3 Nov 2025 19:46:23 +0000 (12:46 -0700)]
[PR rtl-optimization/122536] Fix guard against variable bit extracts in RTL simplifier
While I haven't been able to reproduce the failure Sam reported, based on the
RTL checking failure point and the code in question it was pretty clear the
code that was supposed to guard against a variable bit extract was just
checking the wrong argument to verify it was a constant integer -- it missed a
level of XEXP object extraction.
I passed this patch along to Sam and he verified it fixes his kernel build.
I've bootstrapped and regression tested on x86_64. Pushing to the trunk.
Pushing to the trunk.
PR rtl-optimization/122536
gcc/
* simplify-rtx.cc (simplify_context::simplify_binary_operation_1): Fix
guard against variable bit extracts in recent change.
Jason Merrill [Sat, 1 Nov 2025 18:56:26 +0000 (21:56 +0300)]
c++: ADL finds all friends (P1787)
Some libstdc++ tests were failing with import std because ADL didn't find
rethrow_exception, even though it's a friend. The problem turned out to be
because it's not in the same namespace, and in C++17 ADL only makes hidden
friends visible. But in C++20 P1787 changed [basic.lookup.argdep]/4.2 to
directly include all friends in the lookup.
Note that my change still excludes class members, even though the standard
doesn't specify that; including implicit object member functions would just
break, and even foreign static/xobj member functions seem like they would be
strange to include.
gcc/cp/ChangeLog:
* name-lookup.cc (name_lookup::adl_class_fns): Include all
namespace-scope friends.
Jason Merrill [Sun, 2 Nov 2025 06:44:10 +0000 (09:44 +0300)]
c++/modules: import confict with builtin
27_io/headers/iostream/synopsis.cc was failing with modules because pushdecl
called update_binding for a redeclared import while passing the built-in
clog as "old". This could also be fixed by discarding the builtin in
e.g. import_module_binding, but this seems straightforward.
Jason Merrill [Sat, 1 Nov 2025 13:07:18 +0000 (16:07 +0300)]
libstdc++: add ADL friends
Since the implementation namespaces __detail and __exception_ptr aren't
exported from std, ADL can't find these functions there. Adding friend
declarations makes it work.
Tobias Burnus [Mon, 3 Nov 2025 17:30:07 +0000 (18:30 +0100)]
libgomp.fortran/omp_target_memset.f90 - Avoid implicit mapping by an uninit size [PR122543]
In OpenMP, pointers are implicitly mapped - which means for Fortran that
their pointer target is also mapped. However, for uninitialized memory,
this means that some random pointee with some random amount of memory is
copied - in the good case, size == 0, but if not, odd things can happen.
Solution: Use 'fptr => null()' before the target mapping or - as done here -
declare the pointer inside the region.
libgomp/ChangeLog:
PR libgomp/122543
* testsuite/libgomp.fortran/omp_target_memset.f90: Move fptr inside
the target to avoid implicit mapping of its uninit pointee.
* testsuite/libgomp.fortran/omp_target_memset-2.f90: Likewise.
Jason Merrill [Mon, 3 Nov 2025 14:51:38 +0000 (17:51 +0300)]
c++: modules, clones, and overload resolution
21_strings/basic_string_view/cons/wchar_t/3.cc was failing with import std
because as in the reduced testcase, the module includes an instantiation of
the template constructor for <const char *, const char *>, and importing the
module was wrongly adding that instantiation to CLASSTYPE_MEMBER_VEC, so it
became part of the overload set independent of its template.
tsubst_function_decl doesn't add to CLASSTYPE_MEMBER_VEC, and importing
should work the same.
gcc/cp/ChangeLog:
* module.cc (trees_in::decl_value): Don't add an instantiation to
CLASSTYPE_MEMBER_VEC.
gcc/testsuite/ChangeLog:
* g++.dg/modules/clone-5_a.C: New test.
* g++.dg/modules/clone-5_b.C: New test.
Piotr Trojanek [Wed, 22 Oct 2025 15:38:04 +0000 (17:38 +0200)]
ada: Guard compile-time evaluator against rewritten if-expressions
A hopefully temporary fix for if-expression that has been rewritten into an
if-statement, where a object reference has the if-statement as its parent,
but is not part of the condition, then statements or else statements.
gcc/ada/ChangeLog:
* exp_util.adb (Get_Current_Value_Condition): Guard against orphaned
references in rewritten if-expressions.
Eric Botcazou [Tue, 21 Oct 2025 21:33:01 +0000 (23:33 +0200)]
ada: Restore alignment check for address clause given with alignment clause
The alignment check for address clauses had historically been performed
universally by GNAT, until a decade ago when it was disabled by default
on non-strict-alignment platforms.
This seems questionable when an alignment clause is also given for the
entity since the intent is clear, so the change restores it as well as
its associated warning.
Moreover, this alignment check had historically been subsumed into the
language-defined Range_Check, until two decades ago when it became the
implementation-defined Alignment_Check, while still being part of the
Range_Check to ease the transition. Now is probably a good time to cut
the apron strings and make Alignment_Check standalone.
gcc/ada/ChangeLog:
* doc/gnat_rm/representation_clauses_and_pragmas.rst (Address
Clauses): Adjust description of alignment checks.
* sem_ch13.adb (Address_Clause_Check_Record): Remove now unused
Alignment_Checks_Suppressed component.
(Alignment_Checks_Suppressed): Delete.
(Analyze_Attribute_Definition_Clause) <Attribute_Alignment>: Do not
consider the status of range checks to decide whether to generate an
alignment check. Always generate it if an alignment clause is also
given for the entity.
<Attribute_Alignment>: Generate an alignment check if an address
clause is also given for the entity.
(Register_Address_Clause_Check): Adjust for above removal.
(Validate_Address_Clauses): Test the Check_Address_Alignment flag
on the clause to decide whether to give the warning.
* gnat_rm.texi: Regenerate.
* gnat_ugn.texi: Regenerate.
Piotr Trojanek [Mon, 20 Oct 2025 10:09:07 +0000 (12:09 +0200)]
ada: Decouple compile-time evaluation from while loop source locations
The compile-time evaluation relied on source locations to decide whether a
variable reference occurs within a WHILE loop where the evaluation can
assume the loop condition. Now this relies exclusively on the AST structure.
gcc/ada/ChangeLog:
* exp_util.adb (Find_In_Enclosing_Context): Refactor from handling of
IF statements.
(Get_Current_Value_Condition): Reuse IF code for WHILE statements.
Piotr Trojanek [Fri, 17 Oct 2025 09:25:00 +0000 (11:25 +0200)]
ada: Decouple compile-time evaluation from if_statement source locations
The compile-time evaluation relied on source locations to decide whether a
variable reference occurs within an IF statement where the evaluation can
assume the IF condition. This was unreliable, especially for rewritten and
internally generated IF statements, whose End_Span is typically left as zero.
This patch makes the evaluation exclusively dependent on the AST structure
itself, while the source location and the span of an if statement is only used
in assertion.
gcc/ada/ChangeLog:
* exp_util.adb (Get_Current_Value_Condition): Rewrite to not rely on
Sloc and End_Span of an if statement.
Piotr Trojanek [Fri, 17 Oct 2025 08:47:41 +0000 (10:47 +0200)]
ada: Preserve AST structure when copying tree with discrete types
When copying AST we created an orphaned copy of a scalar range. This was
confusing the compile-time evaluator, because we couldn't determine location of
a scalar range within an IF statement by looking at its parenthood chain.
gcc/ada/ChangeLog:
* sem_util.adb (Update_Semantic_Fields): Preserve tree structure when
copying scalar range of a discrete type.
Piotr Trojanek [Fri, 17 Oct 2025 08:33:44 +0000 (10:33 +0200)]
ada: Keep source locations for inlined subprograms from predefined units
Frontend inlining, which is now deprecated and only enabled with switch -gnatN
is used, used to reset source locations for subprograms from predefined units.
This was a workaround to prevent the debugger from visiting internal code in
Ada.Tags, but this problem no longer occurs (even when switch -gnatN is used)
and is no longer needed. This patch removes it, because it confused
compile-time evaluation, which makes use of source locations to recognize code
within IF statements.
Gary Dismukes [Thu, 16 Oct 2025 21:38:38 +0000 (21:38 +0000)]
ada: Crash on call to a dispatching op with if_expr and tag-indeterminate calls
The compiler can crash with a Storage_Error for a failed precondition
when compiling a call to a dispatching subprogram where an actual for a
controlling formal is given by an if_expression whose dependent expressions
are tag-indeterminate calls. This problem showed up on a build of Alire
(on the compilation of alire-roots.adb) done during a build_gnat_world
mailserver (as well as having been noticed and reported separately by
another engineering team).
The code in Sem_Disp.Check_Dispatching_Call for checking nondispatching
procedure calls for actuals that are calls to abstract tag-indeterminate
functions did not account for conditional expressions, and attempted to
retrieve the (nonexistent) Expression field from an N_If_Expression node,
failing the precondition for Expression. It was discovered that none of
the code checking for illegal calls to abstract tag-indeterminate functions
in procedure calls is needed, and the whole related "elsif" part is removed
by this change. (Note that there is separate checking done separately
within Check_Dispatching_Call that will catch nondispatching calls to
abstract functions.)
gcc/ada/ChangeLog:
* sem_disp.adb (Check_Dispatching_Call): Remove "elsif" that does error
checking for abstract tag-indeterminate calls (seems to be no longer
needed).
Marc Poulhiès [Fri, 10 Oct 2025 08:52:47 +0000 (10:52 +0200)]
ada: Fix another incorrectly nested procedure
When unnesting a loop, its body is moved inside a procedure, and inner
entities have their scope adjusted. The current GNAT Tree at this stage
is incoherent wrt scope information, and some nested entities are
incorrectly scoped, possibly leading to a crash of the unnester.
The existing Fixup_Inner_Scopes procedure has been added to adjust the
incoherences after the fact because fixing them earlier has proven to be
more complex than expected. This change adds one more adjustment by this
procedure for TSS (Type Support Subprogram) that may be embedded within
N_Freeze_Entity nodes.
gcc/ada/ChangeLog:
* exp_ch7.adb (Fixup_Inner_Scopes): Adjust to handle N_Freeze_Entity nodes.
* exp_unst.adb (Get_Level): Assert when the function didn't find the
nested level (indicates that inner sub has scope pointing higher in
the stack)
This patch extends the set of names recognized by
Is_Predefined_File_Name so that names that start with "a-" and are longer
than 12 characters are considered predefined.
This is motivated by the need to make gprname work with the in-tree
a-strunb__shared.ads file that uses GNAT syntax extensions but whose name
wasn't considered predefined before this patch.
Bob Duff [Wed, 15 Oct 2025 10:43:32 +0000 (06:43 -0400)]
ada: Get rid of Sy/Sm mixing (Expression)
We should not mix "syntactic" and "semantic" for the same field
in different node kinds.
The Expression field was both syntactic (in N_Exception_Declaration) and
semantic (in all other node kinds). This patch makes it always
syntactic.
Expression is the last such field, so we remove all code and comments
that allowed for such mixing.
The Expression field in N_Exception_Declaration was never properly
documented; fix that.
No change in overall compiler behavior.
An alternative would be to change the name of this Expression
field to be something else (Exception_Declaration_Expression?),
and keep it as "semantic". That would cause an earthquake in gigi,
because gigi wants to treat exception declarations more-or-less
like normal object declarations, with the Expression field being
the initialization expression. So we don't do that.
gcc/ada/ChangeLog:
* gen_il-gen-gen_nodes.adb (N_Exception_Declaration):
Change Expression from Sm to Sy, to match other Expression fields.
* gen_il-gen.adb (Setter_Needs_Parent):
Expression no longer needs to be a special case.
(Check_For_Syntactic_Field_Mismatch):
Do not exempt Expression from the Sy/Sm mixing rule.
This was the last such case, so remove all the exemption code.
* gen_il-gen.ads: Update comments to match new code.
* sinfo.ads (N_Exception_Declaration):
Document the meaning of the Expression field, because it
doesn't follow from the RM syntax of exception_declaration.
* exp_ch11.adb: Minor comment fixes.
Eric Botcazou [Wed, 15 Oct 2025 14:23:26 +0000 (16:23 +0200)]
ada: Reject nonconfirming size clauses on objects of floating-point types
The RM 13.1(7/5) subclause contains the following sentences: "If the size
of an object is greater than that of its subtype, the additional bits are
padding bits. For an elementary object, these padding bits are normally
read and updated along with the others."
GNAT implements it only for objects of integer and fixed-point types.
For objects of floating-point types, the padding bits are ignored (and
therefore not initialized) with a warning:
warning: 32 bits of "F" unused [enabled by default]
Implementing it for objects of floating-point types does not seem worth the
hassle, so rejecting nonconfirming size clauses is probably the cleanest
approach (clauses giving the object a size lower than that of its subtype
are already rejected for objects of floating-point types).
gcc/ada/ChangeLog:
* sem_ch13.adb (Analyze_Attribute_Definition_Clause)
<Attribute_Size>: Tweak wording of existing error message for the
size of all elementary objects. Move error handling for aliased
objects into the block for objects and give a similar error for
(nonaliased) floating-point objects.
Piotr Trojanek [Tue, 14 Oct 2025 14:15:46 +0000 (16:15 +0200)]
ada: Remove workaround for a freezing issue with address of a slice
Rewriting of an address of a slice, e.g. "X (Low .. High)'Address" into an
address of an indexed component, e.g. "X (Low)'Address", was only done as a
workaround for some freezing issue. Apparently this freezing issue is now
solved and the rewriting is causing problems for GNATprove. (This rewriting,
if needed, should be rather done in expansion and not resolution.)
gcc/ada/ChangeLog:
* sem_attr.adb (Resolve_Attribute): Remove rewriting of a slice
address expression.
Viljar Indus [Tue, 14 Oct 2025 09:02:13 +0000 (12:02 +0300)]
ada: Fix Put_Image for Multiway_Trees
Put_Image should start printing the tree from the Root instead
of the First_Child.
gcc/ada/ChangeLog:
* libgnat/a-cbmutr.adb (Put_Image): Fix the condition and starting point
for printing the tree.
* libgnat/a-cimutr.adb (Put_Image): Likewise.
* libgnat/a-comutr.adb (Put_Image): Likewise.
Viljar Indus [Fri, 10 Oct 2025 09:47:07 +0000 (12:47 +0300)]
ada: Avoid Ignored ghost code behavior in Codepeer_Mode
When the frontend is called by it should treat all ghost
code as checked. Avoid removing expansion in ignored ghost code regions
when Codepeer_Mode is active.
gcc/ada/ChangeLog:
* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Avoid disabling
the expander for ignored ghost regions if Codepeer_Mode is active.
* sem_ch7.adb (Analyze_Package_Body_Helper): Likewise.
* freeze.adb (Freeze_Entity): Avoid triggering special freezing
action for entities within ignored ghost regions in Codepeer_Mode.
This patch introduces the 'Constructor attribute and implements its direct
attribute definition syntax within subprogram specification. This new shorthand
avoids having to come up with an arbitrary subprogram name and to type out the
constructor aspect. Before, constructors where defined through the aspect
Constructor, which has been removed.
Furthermore, this patch prepares for the expansion of direct attribute
definitions to other attributes.
gcc/ada/ChangeLog:
* errout.adb (Set_Msg_Node): Support N_Attribute_Reference and
nodes that denotes direct attribute definitions.
* exp_dbug.ads: Description for the encoding of direct attribute
definitions as tick are hard to deal in entity names.
* erroutc.adb
(Set_Msg_Insertion_Name): Replace underscore between prefix and
attribute name in direct attribute definitions; at this point we
lost the semantic information of node type and we resort to match
the string name as described in exp_dbug.adb.
* exp_aggr.adb (Convert_To_Positional): Use Needs_Construction and
Has_Default_Constructor.
* exp_ch3.adb (Build_Record_Init_Proc)
(Expand_N_Object_Declaration): Likewise.
* exp_attr.adb (Expand_N_Attribute_Reference): Likewise.
* exp_ch4.adb (Expand_N_Allocator): Likewise.
* exp_ch6.adb
(Prepend_Constructor_Procedure_Prologue): Use
Is_Constructor_Procedure.
(Make_Parent_Constructor_Call): Use
Direct_Attribute_Definition_Name.
* gen_il-fields.ads: Remove Constructor_List and Constructor_Name.
* gen_il-gen-gen_entities.adb: Likewise.
* einfo.ads (Needs_Construction): Add description.
(Has_Delayed_Aspects): Adjust indentation.
* par-ch13.adb (P_Attribute_Designators): Parse attribute
designators.
(P_Representation_Clause): Use P_Attribute_Designators.
* par-ch6.adb (P_Subprogram): Support attribute designators in
subprogram name.
(Rewrites_Entity_If_Direct_Attribute_Def): Fix the specification
node in case of direct attribute definitions.
* par-endh.adb (Check_End, Same_Label): Likewise.
* par.adb (P_Attribute_Designators): Specification.
* sem_attr.adb (Analyze_Attribute): Error when using 'Constructor
outside procedure specification.
(Analyze_Attribute): Add error handling code.
* sem_ch3.adb (Analyze_Aspect_Specifications): Likewise.
* sem_ch6.adb (Analyze_Direct_Attribute_Definition): Handle direct
attribute definitions. Add error handling code for the
'Construction attribute and set constructor flags when necessary.
(Analyze_Subprogram_Specification): Use
Analyze_Direct_Attribute_Definition.
* sem_util.adb (Direct_Attribute_Definition_Name): Name of
entities created for direct attribute definitions. We emit an
error if multiple attributes.
(Is_Direct_Attribute_Subp_Spec): Helper to check whether a
subprogram specification is a direct attribute definition.
(Is_Constructor_Procedure): Helper to check whether a subprogram
is a constructor procedure.
(Has_Default_Constructor): Check whether the default constructor
exists.
(Default_Constructor): Not used anymore.
(Parameter_Count): Likewise.
(Process_End_Label): Get_Attribute_Reference_Name_String encodes
also direct attribute definition end labels.
* sem_util.ads: Likewise.
* snames.ads-tmpl: Support for 'Constructor attribute.
* snames.adb-tmpl (Is_Direct_Attribute_Definition_Name): Helper to
check attributes allowed in direct attribute definitions.
* aspects.ads: Remove constructor aspect.
* sem_ch13.adb: Likewise.
Eric Botcazou [Thu, 9 Oct 2025 07:41:54 +0000 (09:41 +0200)]
ada: Tidy up code dealing with visibility in instances of formal packages
The actuals for parameters of formal packages are visible in the instance
if the formal packages either are declared with a box or contain defaulted
parameters. This is essentially implemented in Check_Generic_Actuals and
Restore_Private_Views, with the help of the Is_Visible_Formal flag.
This documents more prominently the processing and streamlines it, as well
as removes a couple of questionable calls to Set_Is_Hidden, thus plugging
a couple more loopholes in the implementation.
gcc/ada/ChangeLog:
PR ada/122161
* sem_ch12.adb: Improve the description of Check_Generic_Actuals,
Restore_Private_Views and Switch_View, and alphabetize them.
(Check_Generic_Actuals): Make actuals visible only if needed.
(Install_Formal_Packages): Pass exact Is_Formal_Box parameter and
remove call to Set_Is_Hidden.
(Instantiate_Formal_Package): Use Next_Non_Pragma consistently in
the loop computing the visibility of actuals.
(Analyze_Package_Instantiation): Use named second parameter in the
call to Restore_Private_Views.
(Analyze_Subprogram_Instantiation): Likewise.
(Instantiate_Package_Body): Likewise and for Check_Generic_Actuals.
(Instantiate_Subprogram_Body): Likewise.
(Restore_Env): Replace call to Restore_Private_Views.
(Restore_Private_Views): Remove default value for second parameter
and test of presence for first parameter. Consistently clear the
Is_Potentially_Use_Visible flag when setting the Is_Hidden flag.
Remove call to Set_Is_Hidden for a formal package of the enclosing
generic unit, if any.
Bob Duff [Fri, 10 Oct 2025 16:40:42 +0000 (12:40 -0400)]
ada: Get rid of Sy/Sm mixing (Actions)
We should not mix "syntactic" and "semantic" for the same field
in different node kinds.
The Actions field is both syntactic and semantic. This patch
makes it always syntactic.
No change in overall compiler behavior.
gcc/ada/ChangeLog:
* gen_il-gen.adb (N_Short_Circuit):
Make Actions syntactic.
(N_Case_Expression_Alternative): Likewise.
* gen_il-gen-gen_nodes.adb (Create_Type):
No longer exempt Actions from the syntactic/semantic ordering rule.
(Check_For_Syntactic_Field_Mismatch):
No longer exempt Actions from the syntactic/semantic mixing rule.
* sinfo.ads (N_Compound_Statement):
Add comment.
A recent patch added a procedure in the spec of System.Stream_Attributes
but failed to add the corresponding body in the CHERI-specific body of
this package. This patch fixes this.
gcc/ada/ChangeLog:
* libgnat/s-stratt__cheri.adb (W_80IEEE): New procedure.
Bob Duff [Wed, 8 Oct 2025 16:29:35 +0000 (12:29 -0400)]
ada: Get rid of unused node/entity fields (Set_ only)
The following fields are Set_ but not used in GNAT. We get rid of them
or document them as follows:
- Has_Pragma_Controlled
Remove.
- Corresponding_Entry_Body
Document that it is used by codepeer.
- Is_Activation_Record
Document that it is used by llvm.
- Is_Discriminant_Check_Function
Document that it is used by codepeer.
- Original_Access_Type
No change (already documented that it is used by codepeer).
Alexandre Oliva [Wed, 1 Oct 2025 14:59:18 +0000 (11:59 -0300)]
ada: Add ctor call after address clause
An object initialized by a C++-imported constructor call has the
constructor function call transformed into a procedure call, and the
call is inserted after the object declaration.
If the object has say an address clause, that transformation separates
the declaration from the address clause, causing the translation of
the call to fail.
Keep such clauses next to the declaration by inserting the constructor
procedure call after them.
gcc/ada/ChangeLog:
* exp_ch3.adb (Expand_N_Object_Declaration): Insert ctor call
after representation clauses.
Bob Duff [Tue, 7 Oct 2025 14:45:20 +0000 (10:45 -0400)]
ada: Remove exception handler in Check_Vanishing_Fields
Check_Vanishing_Fields calls Same_Node_To_Fetch_From, which was calling
Node_To_Fetch_From, which will raise an exception (as it should) on
..._Type_Only fields if called early (when the Base_Type,
Implementation_Base_Type, or Root_Type has not yet been set).
Other exceptions can also be raised when Check_Vanishing_Fields
is called early.
An exception handler was used to ignore any such exceptions. That was
correct, but it is annoying in gdb with "catch exception". (Note that
efficiency doesn't matter much, because Check_Vanishing_Fields is not
done in production mode.)
We now call Node_To_Fetch_From_If_Set, remove other potential raises,
and remove the now-unnecessary exception handler.
Note that other calls to Node_To_Fetch_From will still raise an
exception (as they should) for such "early" calls.
gcc/ada/ChangeLog:
* atree.adb (Same_Node_To_Fetch_From):
Use Node_To_Fetch_From_If_Set, and remove handler.
* einfo-utils.adb (Root_Type_If_Set):
Return Empty if Base_Type_If_Set returns Empty.
Return Empty if we find Etype (T) = Empty.
(Underlying_Type): Use "Has_Non_Limited_View..." instead
of "Present (Non_Limited_View...)", because the latter raises
an exception when given the wrong Ekind.
On some platforms, Long_Long_Float'Size (and Long_Long_Float'Stream_Size)
is 128 but only 80 bits are effectively used. This pack makes it so
'Write in this case write zeros for the padding bits instead of
unspecified values.
gcc/ada/ChangeLog:
* gen_il-fields.ads (Is_IEEE_Extended_Precision): New flag.
* gen_il-gen-gen_entities.adb: Likewise.
* gen_il-internals.adb (Image): Likewise.
* treepr.adb (Image): Likewise.
* einfo.ads: Document new flag.
* cstand.adb (Copy_Float_Type, Register_Float_Type): Use new flag.
* libgnat/s-stratt.ads (W_80IEEE): New procedure.
* libgnat/s-stratt.adb (W_80IEEE): Likewise.
* exp_strm.adb (Get_Primitives): Select new procedure when
appropriate.
* rtsfind.ads: Register new runtime procedure.
* sem_ch3.adb (Build_Derived_Numeric_Type,
Analyze_Subtype_Declaration): Propagate new flag.
Eric Botcazou [Tue, 7 Oct 2025 20:57:02 +0000 (22:57 +0200)]
ada: Fix incorrect static string concatenation with null left string
It comes from the implementation of an optimization for static concatenation
in Resolve_String_Literal, which causes the original subtype of the literal
to be lost. Now this subtype must be preserved in the case where the left
operand of the concatenation may be null, per the 4.5.3(5) subclause.
gcc/ada/ChangeLog:
PR ada/122160
* sem_res.adb (Resolve_Op_Concat_Rest): Do not build the subtype of
the second operand again if it has already been built.
(Resolve_String_Literal): Do not defer the creation of the subtype
for the right operand of a concatenation whose left operand may be
the null string.
Gary Dismukes [Mon, 6 Oct 2025 19:23:34 +0000 (19:23 +0000)]
ada: Remove dependence on secondary stack for type with controlled component
There are cases where GNAT introduces a dependence on the secondary stack
in a build-in-place function with a result subtype that is definite, when
this dependence could be avoided. In particular this is done for record
types that requires finalization due to having a controlled component.
At one time such functions required the secondary stack in order to
properly handle cases where the function might raise an exception
(to avoid improper finalization in the caller), but that is no longer
necessary. We remove the dependence of these functions on the SS,
along with the BIPalloc formal and the generation of the big if_statement
that uses that formal.
An additional small change is to revise the condition for determining when
to generate SS mark/release within functions.
gcc/ada/ChangeLog:
* exp_ch6.ads (Make_Build_In_Place_Call_In_Allocator): Simplify comment.
* exp_ch6.adb (Make_Build_In_Place_Call_In_Allocator): Remove obsolete
comment about not being able to allocate fixed-size controlled results
on the caller side, and replace another obsolete comment with a simpler
comment. Call Build_Allocate_Deallocate_Proc when the function doesn't
need a BIPalloc formal to ensure that function results with controlled
parts allocated on the caller side will be chained for finalization.
(Make_Build_In_Place_Call_In_Object_Declaration): Call Needs_BIP_Collection
on the function's Entity_Id rather than the function call.
(Needs_BIP_Collection): If a BIP function doesn't need a BIPalloc formal
then it doesn't need a BIP collection either; return False in that case.
(Needs_BIP_Alloc_Form): Remove test of Needs_BIP_Collection.
* exp_ch7.adb (Expand_Cleanup_Actions): Move test of Uses_Sec_Stack
to be the first conjunct in setting of Needs_Sec_Stack_Mark, and put
the other tests in a disjunction subsidiary to that. Improve preceding
comment.
Bob Duff [Tue, 7 Oct 2025 14:35:03 +0000 (10:35 -0400)]
ada: Get rid of Sy/Sm mixing (Default_Expression)
We should not mix "syntactic" and "semantic" for the same field
in different node kinds.
Change the name of Default_Expression (a syntactic field) on
N_Formal_Object_Declaration to be Expression. This avoids
the conflict with the name-named semantic field of
N_Parameter_Specification.
It is also more uniform with other syntactic categories that
use default_expression in the syntax rules. See, for example,
COMPONENT_DECLARATION in sinfo.ads, which is presumably intended
to be uniform with OBJECT_DECLARATION.
Fix the comment on N_Formal_Object_Declaration to refer
to the new field name Expression.
gcc/ada/ChangeLog:
* gen_il-gen-gen_nodes.adb: Rename Default_Expression to be
Expression.
* gen_il-gen.adb (Check_For_Syntactic_Field_Mismatch): Do not
exempt Default_Expression from the rule.
* par-ch12.adb (P_Formal_Object_Declarations): Use renamed setter.
* sem_ch12.adb (Default): Use renamed getter.
(Analyze_Formal_Object_Declaration): Likewise.
* sprint.adb (Sprint_Node_Actual): Use renamed getter.
* sinfo.ads: Fix comments.
Bob Duff [Mon, 6 Oct 2025 10:56:34 +0000 (06:56 -0400)]
ada: Incorrect warning redundant parens on in
This patch fixes a bug where GNAT gives a warning
about redundant parentheses on expressions like "(X in S) = B".
In fact, the parentheses are required in this case.
The bug is caused by constant-folding the expression into
an expression that does not require parentheses, but in
a way that retains the parentheses. The fix is to look
at Original_Node.
gcc/ada/ChangeLog:
* style.adb (Check_Xtra_Parens_Precedence):
Give warning based on Original_Node.
Eric Botcazou [Mon, 6 Oct 2025 19:36:56 +0000 (21:36 +0200)]
ada: Fix visibility issue in nested instance with use clause for formal package
The compiler gives a spurious visibility error for a formal object parameter
of a formal package with a use clause, present in a parent instance, when an
instance of a child generic unit is compiled, while this does not happen in
the same circumstances for a formal type parameter.
The discrepancy comes from the Check_Generic_Actuals procedure, which clears
the Is_Hidden flag on all the actuals of a generic instance, but only sets
the Is_Potentially_Use_Visible flag on the actuals for formal types.
The change also contains a fix for a pasto in Restore_Private_Views, which
is responsible for undoing the changes made by Check_Generic_Actuals.
gcc/ada/ChangeLog:
PR ada/122161
* sem_ch12.adb (Check_Generic_Actuals): Consistently set the
Is_Potentially_Use_Visible flag on actuals whenever the Is_Hidden
flag is cleared.
(Restore_Private_Views): Clear the Is_Potentially_Use_Visible flag
explicitly on the entities of an actual package.
projects / thirdparty / gcc.git / log
