Leo Barsky [Wed, 17 Sep 2025 16:01:59 +0000 (13:01 -0300)]
kernel: 6.12: refresh patches for airoha/econet on 6.12.45
Refresh patches 6.12 for airoha and econet
Fixes: 122135b964 ("airoha: an7581: add support for kernel 6.12") Fixes: 73d0f92460 ("kernel: Add new platform EcoNet MIPS") Signed-off-by: Leo Barsky <leobrsky@proton.me> Link: https://github.com/openwrt/openwrt/pull/20073 Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.
For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
Daniel Golle [Mon, 15 Sep 2025 16:11:20 +0000 (17:11 +0100)]
mediatek: refresh patches
Refresh patch which was accidentally without non-confrming style and
not matching line numbers.
Also add patch description by copying the description of the commit
in OpenWrt, so the patch can be applied using `git am` and is ready
for upstream submission.
Fixes: afcec128c5 ("mediatek: add support for trng on mt7988a") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
George Moussalem [Tue, 19 Aug 2025 14:51:59 +0000 (18:51 +0400)]
qualcommax: ipq50xx: backport upstreamed patches for adding ipq5018 CMN PLL support
Use upstreamed patches for adding IPQ CMN PLL driver support and its
node and clocks to the DTS accordingly.
In addition, set clock-div and clock-mult properties instead of the
frequency itself for the XO board clock in all board files as it's
converted to a fixed factor clock.
Felix Fietkau [Sun, 14 Sep 2025 15:04:44 +0000 (17:04 +0200)]
ucode: update to Git HEAD (2025-08-26)
2ae08749a87e ucode: add padding to uc_resource_ext_t 7931bd901222 socket: add socket.pair() 4cd07cd66ab3 socket: add socket.open() 6350e6383ff3 struct: implement X and Z formats for hex and base64 coding e632e6da1fbc vm: fix potential eyond end of array accesses a7ead3169ebf resolv: properly handle multiple TXT strings 9d782ea4af63 math: Add an optional range to rand()
Fixes: https://github.com/jow-/ucode/issues/315 Fixes: https://github.com/jow-/ucode/issues/321 Signed-off-by: Felix Fietkau <nbd@nbd.name>
bcm27xx: Add padding after writing rootfs to image.
This addresses #9113 by adding up to 1MB padding after writing the
rootfs image. On boot mount_root will probe for existing filesystems
after the rootfs image data. Without overwriting the initial free
space left on the rootfs partition, OpenWrt might incorrectly detect
an exising filesystem and fails to mount it, resulting in a bricked
device as the overlayfs will not be mountend and settings will not be
available.
David Härdeman [Thu, 11 Sep 2025 21:38:11 +0000 (23:38 +0200)]
odhcpd: update to Git HEAD (2025-08-26)
2859741d971e dhcpv4: store reqopts as uint8_t 6d342cc03bf7 odhcpd: add DNR (RFC 9463) support c89b8b3f2ff3 odhcpd: make the IPv6 RA DNR lifetime configurable 066b3dc6ec1a netlink: fix a memory leak 171140e90b6a odhcpd: add a helper function for addr6/prefix parsing 5585b969c18f router: move pref64 calculations to the config stage 4308384748be dhcpv6: add ipv6 pxe support 6e1ad492cef5 router: replace ssize_t with size_t
Donghyun Ko [Fri, 1 Aug 2025 06:01:07 +0000 (15:01 +0900)]
mediatek: add support for ipTIME AX7800M-6E
Specification
-------------
- SoC : MediaTek MT7986AV quad-core ARM Cortex-A53 2GHz
- RAM : DDR4 512Mbytes, Nanya Technology NT5AD256M16E4
- Flash : 128Mbytes NAND Flash, ESMT F50L1G41LB
- WLAN : MediaTek MT7976DAN, MediaTek MT7916AN, MediaTek MT7976AN
- 2.4GHz : b/g/n/ax, Multi User MIMO
- 5GHz : a/n/ac/ax, Multi User MIMO
- 6GHz : ax, Multi User MIMO
- Ethernet : 10/100/1000 Mbps x4, LAN (MediaTek MT7531AE)
10/100/1000/2500 Mbps x1, WAN (MaxLinear GPY211C0VC)
- UART : 1x4 pin header on PCB
- [J1] 3.3V, TX, RX, GND (115200, 8N1)
- Buttons : WPS, Reset
- Switches : Rfkill Slide Switch
- USB : 1x USB 3.0 (MediaTek MT7986AV peripheral)
- FAN : 1x Fan (off - slow - fast)
- LEDs : 1x Power (Blue)
1x CPU (Blue)
1x Wi-Fi 6GHz (Blue)
1x Wi-Fi 5GHz (Blue)
1x Wi-Fi 2.4GHz (Blue)
4x LAN activity (Blue)
1x WAN activity (Blue)
1x USB 3.0 (Blue)
- Power : 12VDC, 3.5A (Center positive polarity)
MAC address
-----------
+-----------+-------------------+------------------------+
| Interface | MAC | Algorithm |
+-----------+-------------------+------------------------+
| WLAN 2.4G | 58:86:94:xx:xx:xx | label1 |
| WLAN 5G | 5A:86:94:xx:xx:xx | label2 with LA Bit set |
| WLAN 6G | 5A:86:94:xx:xx:xx | label1 with LA Bit set |
| WAN | 58:86:94:xx:xx:xx | label1 + 1 |
| LAN | 58:86:94:xx:xx:xx | label1 + 3 |
+-----------+-------------------+------------------------+
The WLAN 2.4G MAC address (label1) was found in 'Factory' partition, 0xA0004
The WLAN 5G MAC address (label2) was found in 'Factory' partition, 0x4
Installation
------------
1. Download the OEM recovery software (ipTIME Firmware Wizard (11ac))
from the manufacturer's website
2. Download the *squashfs-factory.bin file from the OpenWrt website
3. Press a reset button, and power up the router (keep pressing the reset button)
4. Wait more than 10 seconds until the CPU LED stop blinking
5. Connect the router (LAN port) to the PC
6. Run the OEM recovery software and follow the instructions
7. Select the *squashfs-factory.bin file during the router recovery process
8. Wait for the router to boot from *squashfs-factory.bin
Note: The router will automatically reboot if no file is uploaded within
55 seconds.
Fan Control
------------
The fan speed is controlled by writing a value from 0 to 2 to the
`fan1_target` file.
```
cd /sys/devices/platform/gpio-fan/hwmon/hwmon2
echo '0' > fan1_target // off
echo '1' > fan1_target // slow
echo '2' > fan1_target // fast
```
Limitation: Enabling Wi-Fi 6E
----------
Wi-Fi 6E (6GHz) does not work out of the box on LuCI.
After installation, you need to configure a few settings in the `radio1`
and `default_radio1` sections of the `/etc/config/wireless`.
Once you have made these changes, you can enable and use Wi-Fi 6E.
In the `radio1` section, you need to add three common options:
- band: must be set to `6g`
- country: a valid country code for the 6GHz band
- channel: a preferrend scanning channel (PSC) for 6GHz
In the `default_radio1` section, you need to add the SSID and key:
- ssid: The public name of your Wi-Fi network
- key: The Wi-Fi password
- encryption: must be set to either `sae` for WPA3 or `owe` for OWE
(open network)
Example:
```
config wifi-device 'radio1'
...
option band '6g'
option country 'KR'
option channel '37'
...
Limitation: Maximum Transmit Power
----------
The maximum transmit power is currently broken. In the drop-down menu,
you can only choose between "driver default" and "255 dBm (2147493647
mW)". There is currently no workaround for the issue. Please leave the
maximum transmit power set to "driver default".
Daniel Golle [Thu, 11 Sep 2025 00:43:24 +0000 (01:43 +0100)]
mediatek: add driver for HW-RNG v2
Add driver for hardware random number generator found in MT7981, MT7988
and MT7987. This gives us a fast source of high-quality random numbers
on those platforms.
root@OpenWrt:~# cat /dev/hwrng | rngtest -c 10000
rngtest 6.17
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
rngtest: starting FIPS tests...
rngtest: bits received from input: 200000032
rngtest: FIPS 140-2 successes: 9988
rngtest: FIPS 140-2 failures: 12
rngtest: FIPS 140-2(2001-10-10) Monobit: 2
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 4
rngtest: FIPS 140-2(2001-10-10) Long run: 6
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=616.108; avg=11979.007; max=19531250.000)Kibits/s
rngtest: FIPS tests speed: (min=1.859; avg=82.116; max=83.656)Mibits/s
rngtest: Program run time: 18629928 microseconds
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The only consumers of the Realtek HSGMII (2.5G SGMII) mode were
the RTL8226/RTL8221B PHYs. These have been converted to dynamic
SGMII/2500base-x mode switching. Drop the leftovers of the mode
implementation.
The mdio controller got its own dts node with a dedicated bus node.
Until now it still searches the phy nodes in the ethernet node.
Change the driver so it searches the nodes at the right location.
For this to work move the phy nodes in all dts/dtsi over to the new
bus node. Use the following replacement rule:
Until now the mdio bus is a subnode of the ethernet device. This
coupling is different from upstream and wrong. Ethernet and mdio
are different devices. Additionally differentiate between mdio
controller and mdio bus. To make it clear:
- There is one mdio controller
- With up to 4 busses (on RTL93xx)
Prepare new mdio controller and bus nodes with SoC specific compatibles.
These will be used later when refactoring the mdio driver probing.
Remark! For now only define the first bus for the RTL93xx targets.
So the driver still relies on "rtl9300,smi-address = <x y>;". It will
need much more refactoring to get totally aligned with upstream.
realtek: rtl931x: align SerDes access with other targets
While converting the RTL931x SerDes code to the new frontend
access methods, the target specific workarounds where left in
place. The old functions were kept and the phy/sds mapping
was unchanged too. It is time to clean this up
- drop the old functions
- reuse the existing read/write logic
- harden the new functions
For now keep the function naming rtmdio_...__new() as is. This
will be changed in a future commit.
econet: Add new target TP-Link Archer VR1200v (v2)
The TP-Link Archer VR1200v (v2) is a low end DSL modem based on the
EcoNet EN751221 processor platform.
While it does have an unlocked bootloader, the factory upgrade feature
requires a cryptographic signature so flashing from the web UI is not
feasible.
The Archer VR1200v (v2) uses a dual-image layout. I have chosen to reuse
this to support dual-boot between OpenWRT and the factory firmware.
Flashing instructions (from bootloader):
Build and then locate the squashfs-sysupgrade.bin image file
Get the length of that file in hex: printf '%X\n' "$(stat -c%s the-file-squashfs-sysupgrade.bin)"
Connect to device with xmodem capability, e.g. picocom --send-cmd lsx -vv -b 115200 /dev/ttyUSB0
Switch device on and press a key within 3 seconds, you should get to a `bldr>` prompt
Type: xmdm 80020000 <file length hex>
Quickly start xmodem and send the file, in picocom that is ctrl+a ctrl+s <paste-the-file-name> enter If the transfer fails to start, wait 30 seconds to a minute for the bootloader prompt to return and then try the command again.
Once the transfer has completed successfully, type the following flash 80000 80020000 <file length hex>
Type `re` or simply restart the device to boot into OpenWRT
The SmartFiber XP8421-B is a fiber modem which is available for $20 online
and has 512MB of memory, 256MB of SPI NAND flash and 2 USB 2.0 ports in
addition to ethernet, wifi and XPON.
Because EcoNet is not currently producing evaluation boards, the XP8421-B
stands in as a convenient, low cost, off-the-shelf, representitive example
of the capabilities of the EN751221 econet processor. This is also the
example board that is included in the upstream Linux patchset.
The XP8421-B, and apparently many other devices of this platform, use a
dual-image layout. I have chosen to reuse this to support dual-boot between
OpenWRT and the factory firmware. Certain design decisions were made with
the goal of not overwriting data that is used by the factory OS.
This commit also introduces a utility for switching between OS_A and OS_B
which are used for OpenWRT and Factory OS respectively.
Flashing instructions (from bootloader):
Build and then locate the squashfs-tclinux.trx image file
Get the length of that file in hex: printf '%X\n' "$(stat -c%s the-file-squashfs-tclinux.trx)"
Connect to device with xmodem capability, e.g. picocom --send-cmd lsx -vv -b 115200 /dev/ttyUSB0
Switch device on and press a key within 3 seconds
Enter bootloader username and password: telecomadmin nE7jA%5m
Type: xmdm 80020000 <file length hex>
Quickly start xmodem and send the file, in picocom that is ctrl+a ctrl+s <paste-the-file-name> enter If the transfer fails to start, wait 30 seconds to a
minute for the bootloader prompt to return and then try the command again.
Once the transfer has completed successfully, type the following flash 80000 80020000 <file length hex>
Type go or simply restart the device to boot into OpenWRT
EcoNet EN75xx is a big endian MIPS platform used in XPON (fiber),
DSL, and SIM (3g/4g) applications. Complete GPL vender SDKs exist
for this platform, but are based on Linux 2.6.
The bulk of this submission has already been accepted upstream:
https://patchwork.kernel.org/project/linux-mips/list/?series=960479&state=*
This platform uses a bootloader that is derived from old TrendChip
code. This bootloader implements a frustratingly complex Bad Block
Table which is implemented here in en75_bmt.c
This BMT is not upstreamed because it depends on mtk_bmt framework
which likewise is not upstreamed.
This BMT system rewrites block indexes in flash and if the bootloader
considers it to be corrupted, it will attempt to automatically rebuild
on boot. So without implementing the algorithm, you can't safely use
the disk at all.
Hardware
--------
RockChip RK3568 ARM64 (4 cores)
1/2GB LPDDR4 RAM
2x 2500 Base-T (PCIe, r8125b)
1 LED (Power)
1 Button (Reset)
Micro-SD Slot
2x USB 3.0 Port
12V DC Jack
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card using
dd.
Tested-by: Francisco G Luna <frangonlun@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Link: https://github.com/openwrt/openwrt/pull/19990 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Francisco G Luna <frangonlun@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> Link: https://github.com/openwrt/openwrt/pull/19990 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
ramips: switched TP-Link RE305 v1 to new partition layout
After trying to implement the gluon support for this device I ended up in a boot loop due to the usable amount of flash left. With this patch layout it uses the unused and empty flash space in the original partiton layout.
The version 3 of this device the RE365 share the same approach to have more usable space.
A lot of definitions in the global mach include have been taken over
to the individual drivers. Only a few of the definitions are really
used nowadays. Remove all the unneeded lines.
Elbert Mai [Sat, 12 Jul 2025 12:58:59 +0000 (05:58 -0700)]
bcm2712: add kmod-r8169 and kmod-usb-net-rtl8152
Boards such as [1] and [2] add an extra Ethernet port to Raspberry Pi (CM)5.
These typically use Realtek PCIe or USB Ethernet NICs. Include kmod-r8169 and
kmod-usb-net-rtl8152 by default to make it easy to configure LAN/WAN ports
with these parts on Raspberry Pi 5.
Because CM5 can fit in the same carrier boards as CM4, also ensure that both
devices have the same Ethernet NIC kmods.
Zoltan HERPAI [Mon, 11 Aug 2025 16:58:20 +0000 (18:58 +0200)]
sunxi: enable at24 support
Certain boards have an at24(-compatible) EEPROM for storing various
parameters like MAC addresses. Enable support for this hardware across
the whole target.
Zoltan HERPAI [Mon, 11 Aug 2025 16:59:04 +0000 (18:59 +0200)]
uboot-sunxi: randomize ethaddr on Olimex A20 boards
While these boards have an at24 EEPROM for storing the MAC address,
early revisions (up until about 2017) did not contain actual addresses.
Create a random address to have ethernet function properly in u-boot.
airoha: backport upstream fixes for pinctrl PHY LED and MDIO
Backport fixes for Airoha pinctrl driver for PHY LED and MDIO bus. This
fix a copy-paste error for PHY LED and a misconfiguration for MT7530
embedded Switch MDIO bus GPIO pin to permit usage of external PHYs.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Jan Kardell [Mon, 8 Sep 2025 06:52:40 +0000 (08:52 +0200)]
libxml2: Add abi version
The version of libxml2 was bumped from 2.13.6 to 2.14.5. Since version
2.14, libxml2 is not binary compatible with older versions. Therefore
add an abi version.
From the NEWS file:
Binary compatibility is restricted to versions 2.14 or newer. On ELF
systems, the soname was bumped from libxml2.so.2 to libxml2.so.16.
gettext-full only provides libintl which is not licensed under
GPL-3.0.-or-later but under LGPL-2.1-or-later as stated in
gettext-runtime/intl/COPYING.LIB
Fixes: c10d97484a43375a0446dafc8cb4072e26502f37 (Add more license tags with SPDX identifiers) Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com> Link: https://github.com/openwrt/openwrt/pull/19943 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
elfutils libraries are not licensed under GPL-3.0-or-later, they are dual
licensed: GPL-2.0-or-later OR LGPL-3.0-or-later as clearly stated in
source files as well as on https://sourceware.org/elfutils:
The libraries and backends are dual GPLv2+/LGPLv3+. The utilities are GPLv3+.
Installation:
* Upload factory image through the tftp recovery mode.
Notes:
* This device has a dual-boot partition scheme, if installing with the
stock web interface method will flash only on the inactive ubi partitions
which are kernel and rootfs, newly flashed kernel didn't know the proper
rootfs partition so the booted kernel will panic.
Tested-by: Rhnn Hur <hurrhnn@icmp.kr> Signed-off-by: Rhnn Hur <hurrhnn@icmp.kr> Link: https://github.com/openwrt/openwrt/pull/16643 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
All devices supported by the Zynq target have either a Realtek or Marvell
PHY. The Vitesse PHY was enabled when the target was created (2d45ad07fc64).
It's not used here, so it's safe to disable it.
Ethernet PHYs used by individual devices are listed below.
Mikhail Zhilkin [Thu, 14 Aug 2025 16:15:09 +0000 (19:15 +0300)]
uboot-mediatek: add support for FudanMicro FM25S01A
This patch adds support for FudanMicro FM25S01A SPI NAND. It's required
for some CMCC RAX3000Me hardware revisions.
The patch was partially taken from ImmortalWrt.
Link:
https://raw.githubusercontent.com/immortalwrt/immortalwrt/refs/heads/master/package/boot/uboot-mediatek/patches/342-mtd-spinand-Support-fmsh.patch
Michal Halva [Sat, 2 Aug 2025 18:46:14 +0000 (20:46 +0200)]
mediatek: filogic: add support for Cudy WR3000P v1
Hardware
--------
MediaTek MT7981 WiSoC
512MB DDR4 RAM
128MB SPI-NAND
MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
4 LAN MediaTek MT7531 PHY
1 WAN RTL8221B-VB-CG 2.5Gbps PHY
UART: 115200 8N1 3.3V
USB2 Port
PoE on WAN Port
MAC:
LAN MAC: label mac
WAN MAC: label mac + 1
2.4G MAC: label mac
5G MAC: label mac + 1 with LA bit set
Gotchas:
WAN LED does not light up (might require further DTS tweaks)
PoE on WAN port was not tested
This commit is heavily based on WR3000H one, I've just ported DTS differences
from the official image to get USB support and proper LED mapping.
Installation
------------
[Untested as I've received and used a transitional image from Cudy]
1. Connect to the serial port as described in the "Hardware" section.
2. Power on the device + press reset pin. Keep pressing reset pin to enter the U-Boot shell.
3. Download the OpenWrt initramfs image. Place it on an TFTP server
connected to the Cudy LAN ports. Make sure the server is reachable at
192.168.1.88. Rename the image to "cudy3000p.bin"
projects / thirdparty / openwrt.git / log
