Duncan Overbruck [Sat, 11 Jan 2020 21:19:37 +0000 (22:19 +0100)]
add new HOME_MODE login.defs(5) option
This option can be used to set a separate mode for useradd(8) and
newusers(8) to create the home directories with.
If this option is not set, the current behavior of using UMASK
or the default umask is preserved.
There are many distributions that set UMASK to 077 by default just
to create home directories not readable by others and use things like
/etc/profile, bashrc or sudo configuration files to set a less
restrictive
umask. This has always resulted in bug reports because it is hard
to follow as users tend to change files like bashrc and are not about
setting the umask to counteract the umask set in /etc/login.defs.
A recent change in sudo has also resulted in many bug reports about
this. sudo now tries to respect the umask set by pam modules and on
systems where pam does not set a umask, the login.defs UMASK value is
used.
`make` runs each line in a shell and bails out on error,
however, the shell is not started with `-e`, so commands in
`for` loops can fail without the error actually causing
`make` to bail out with a failure status.
For instance, the following make snippet will end
successfully, printing 'SUCCESS', despite the first `chmod`
failing:
all:
touch a b
for i in a-missing-file a b; do \
chmod 666 $$i; \
done
@echo SUCCESS
To prevent wrong paths in install scripts from remaining
unnoticed, let's activate `set -e` in the `for` loop
subshells.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Michael Weiser [Tue, 17 Dec 2019 20:13:07 +0000 (21:13 +0100)]
man: Don't suggest making groupmems user-writeable
Suggesting mode 2770 is dangerous because it makes the binary writeable
by all members of the owning group which is supposed to be normal
end-users. Suggest 2710 instead as is usual for s[ug]id binaries,
allowing execution but neither reading nor writing.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Dave Reisner [Mon, 16 Dec 2019 19:11:23 +0000 (14:11 -0500)]
Don't auto-enable ACCT_TOOLS_SETUID if PAM is detected
Here's a sad story:
* 70971457 is merged into shadow, allowing newgidmap/newuidmap to be
installed with file caps rather than setuid.
* https://bugs.archlinux.org/task/63248 is filed to take advantage of
this.
* The arch maintainer of the 'shadow' package notices that this doesn't
work, and submits a pull request to fix this in shadow.
* edf7547ad5 is merged, fixing the post install hooks.
The problem here is that distros have been building shadow with PAM for
O(years), but the install hooks have silently failed due to the
combination of the directory mismatch (suidubins vs suidsbins) and later
success with setuid'ing newgidmap/newuidmap.
With the install hooks fixed, those of us (Arch[1] and Gentoo[2] so far)
who never built shadow explicitly with --enable-account-tools-setuid are
now getting setuid account tools, and don't have PAM configuration
suitable for use with setuid account management tools.
It's entirely unclear to me why you'd want this, but I assume there's
some reason out there for it existing. Regardless, setuid binaries are
dangerous and shouldn't be enabled by default without good reason.
See https://github.com/shadow-maint/shadow/issues/196
Some distros still care about `/bin` vs `/usr/bin`. This commit makes
it so all binaries are always installed to `/bin`/`/sbin`. The only way to
restore the previous behaviour of installing some binaries to
`/usr/bin`/`/usr/sbin` is to revert the patch.
The problem is that vipw forks a child process and calls waitpid() with the
WUNTRACED flag. When the child process (running the editor) is suspended, the
parent sends itself SIGSTOP to suspend the main vipw process. However, because
the main vipw is in the same process group as the editor which received the ^Z,
the kernel already sent the main vipw SIGTSTP.
If the main vipw receives SIGTSTP before the child, it will be suspended and
then, once resumed, will proceed to suspend itself again.
To fix this, run the child process in its own process group as the foreground
process group. That way, control-Z will only affect the child process and the
parent can use the existing logic to suspend the parent.
man: generate translations using itstool instead of xml2po
This patch was taken from Fedora Rawhide
https://src.fedoraproject.org/rpms/shadow-utils/raw/b41cff195605b29af23d2ad62a60ddc5a2d89786/f/shadow-4.6-use-itstool.patch
Using hard-coded access vector ids is deprecated and can lead to issues with custom SELinux policies.
Switch to `selinux_check_access()`.
Also use the libselinux log callback and log if available to audit.
This makes it easier for users to catch SELinux denials.
Drop legacy shortcut logic for passwd, which avoided a SELinux check if uid 0 changes a password of a user which username equals the current SELinux user identifier.
Nowadays usernames rarely match SELinux user identifiers and the benefit of skipping a SELinux check is negligible.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
With this, it is possible for Linux distributors to store their
supplied default configuration files somewhere below /usr, while
/etc only contains the changes made by the user. The new option
--enable-vendordir defines where the shadow suite should additional
look for login.defs if this file is not in /etc.
libeconf is a key/value configuration file reading library, which
handles the split of configuration files in different locations
and merges them transparently for the application.
Dave Reisner [Wed, 31 Jul 2019 17:09:36 +0000 (13:09 -0400)]
Fix failing chmod calls on installation for suidubins
suidubins should be suidusbins, since these binaries are installed
${prefix}/sbin. This historically hasn't broken the build because
chmod of newgidmap/newuidmap succeeds, causing make to think the command
succeeded. Configuring shadow with --with-fcaps removes these final two
entries and exposes the chmod failure to make.
Dave Reisner [Wed, 31 Jul 2019 17:09:36 +0000 (13:09 -0400)]
Honor --sbindir and --bindir for binary installation
Some distros don't care about the split between /bin, /sbin, /usr/bin,
and /usr/sbin, so let them easily stuff binaries wherever they want.
This also fixes a problem during installation where-in a loop of 'chmod
4755' calls will mostly fail. However, because the last two succeed
(newuidmap/newgidmap), make considers the command to be a success.
Somewhat not-amusingly, configuring shadow with --with-fcaps will cause
installation to fail because the final chmod call is now a failing one.
Stanislav Brabec [Fri, 26 Jul 2019 20:47:05 +0000 (22:47 +0200)]
login.defs: Cosmetic space change
Fix formatting of login.defs comments. Variables are preceeded by "#"
without space, comments are preceeded by "# ". It makes the file machine
parseable again.
Yi Zhao [Mon, 17 Jun 2019 07:36:34 +0000 (15:36 +0800)]
configure.ac: fix configure error with dash
A configure error occurs when /bin/sh -> dash:
checking for is_selinux_enabled in -lselinux... yes
checking for semanage_connect in -lsemanage... yes
configure: 16322: test: yesyes: unexpected operator
Use "=" instead of "==" since dash doesn't support this operator.
Adam Majer [Mon, 21 Jan 2019 08:32:36 +0000 (09:32 +0100)]
Add support for btrfs subvolumes for user homes
new switch added to useradd command, --btrfs-subvolume-home. When
specified *and* the filesystem is detected as btrfs, it will create a
subvolume for user's home instead of a plain directory. This is done via
`btrfs subvolume` command. Specifying the new switch while trying to
create home on non-btrfs will result in an error.
userdel -r will handle and remove this subvolume transparently via
`btrfs subvolume` command. Previosuly this failed as you can't rmdir a
subvolume.
usermod, when moving user's home across devices, will detect if the home
is a subvolume and issue an error messages instead of copying it. Moving
user's home (as subvolume) on same btrfs works transparently.
Tomas Mraz [Thu, 2 May 2019 12:39:01 +0000 (14:39 +0200)]
Do not fail locking if there is a stale lockfile.
As the lockfiles have PID in the name, there can be no conflict
in the name with other process, so there is no point in using
O_EXCL and it only can fail if there is a stale lockfile from
previous execution that crashed for some reason.
Tomas Mraz [Thu, 2 May 2019 12:33:06 +0000 (14:33 +0200)]
Use the lckpwdf() again if prefix is not set
The implementation of prefix option dropped the use of lckpwdf().
However that is incorrect as other tools manipulating the shadow passwords
such as PAM use lckpwdf() and do not know anything about the
shadow's own locking mechanism.
This reverts the implementation to use lckpwdf() if prefix option
is not used.
Chris Lamb [Wed, 2 Jan 2019 18:06:16 +0000 (18:06 +0000)]
Make the sp_lstchg shadow field reproducible (re. #71)
From <https://github.com/shadow-maint/shadow/pull/71>:
```
The third field in the /etc/shadow file (sp_lstchg) contains the date of
the last password change expressed as the number of days since Jan 1, 1970.
As this is a relative time, creating a user today will result in:
username:17238:0:99999:7:::
whilst creating the same user tomorrow will result in:
username:17239:0:99999:7:::
This has an impact for the Reproducible Builds[0] project where we aim to
be independent of as many elements the build environment as possible,
including the current date.
This patch changes the behaviour to use the SOURCE_DATE_EPOCH[1]
environment variable (instead of Jan 1, 1970) if valid.
```
This updated PR adds some missing calls to gettime (). This was originally
filed by Johannes Schauer in Debian as #917773 [2].
projects / thirdparty / shadow.git / log
