Prepare for 3.2 alpha 3

Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes

Prepare for release of 3.2 alpha 2

Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes

make update

Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes

Copyright year updates

Reviewed-by: Richard Levitte <levitte@openssl.org>
Release: yes

Fix no-ssl-trace

Ensure we use OPENSSL_NO_SSL_TRACE guards where appropriate.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22193)

Move e_os2.h up in quictestlib.c to allow symbol definition consistency.

Fixes: #22178
Signed-of-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22179)

Fix a mem leak when the FIPS provider is used in a different thread

We were neglecting to register the main thread to receive thread stop
notifications. This is important if the thread that starts the FIPS
provider is not the same one that is used when OPENSSL_cleanup() is
called.

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)

evp_test: recondition cipher dupctx FIPS version check.

Until the cipher dupctx is properly implemented in 3.1 and 3.0 the check is
wrong.  This should be reverted once the implemenation has been done.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)

fips: use seed source requested

Fixes #21909

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)

rand: add extra error code

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)

fips selftest: avoid relying on a real RNG for self tests

Rather than instantiate the private and primary DRBGs during the
selftest, instead use a test RNG.  This leaves the DRBG setup
pristine and permits later replacement of the seed source despite
the very early running power up self tests.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)

Provider cross version checks warning

Add a warning note to the provider cross version checks indicating that a
pull request branch will not be used if execution is set to on pull request.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)

fix indentation

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)

remove redundant free of NULL

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21964)

Support all NULL-syntax X.509v3 extensions

Signed-off-by: Jonathan M. Wilbur <jonathan@wilbur.space>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21342)

Add a test for BIO_ADDR_copy()

We also add a test for BIO_ADDR_dup() which was also added in 3.2

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)

Clean away the test code implementation of bio_addr_copy

We now have a public function for BIO_ADDR_copy() which can be used in
preference to the test code's private implementation.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)

Add documentation for the BIO_ADDR_copy() function

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)

Implement a public BIO_ADDR_copy() function

We already have BIO_ADDR_dup() but in some contexts that is not sufficent.
We implement BIO_ADDR_copy() and make BIO_ADDR_dup() use it.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22164)

Remove a spurious inclusion of the sparse array header file

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22174)

adding -outpubkey option to genpkey

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22173)

no-engine: fix signing with legacy app method based keys

Signing with an app method based key (i.e. an `EVP_PKEY` which wraps an
`RSA` key with an application defined `RSA_METHOD`) used to work in 1.1.1.
That feature was broken in commit 60488d2434, but later on fixed by @t8m
in commit b247113c05 (see #14859).

This commit corrects a  minor flaw of the fix, which affects only
`no-engine` builds: the special treatment for foreign keys is guarded
by an `OPENSSL_NO_ENGINE` check.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/22163)

Do not include sparse_array.o in libssl

sparse_array.o is not needed in libssl at 3.0.x version.

Signed-off-by: Huiyue Xu <xuhuiyue@huawei.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22111)

(cherry picked from commit a31cd07af1ca34cdbbd2b077a933208d447ed0b2)

Clarify the terminology in the noisy dgram BIO

The previous terminology was quite confusing. We try to use drop, duplicate
and delay more consistently and introduce the "reinject" terminology as a
mechanism for implementing duplicates and delays.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Ensure we free all the BIOs in a chain for QUIC like we do in TLS

An application may pass in a whole BIO chain via SSL_set_bio(). When we
free the BIO we should be using BIO_free_all() not BIO_free() like we do
with TLS.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Ensure we up-ref the sbio before passing it to tserver

We are actually passing two references to sbio: one as part of a BIO chain
and one stand alone. Therefore we need two references.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Remove some redundant code from test helper BIOs

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Ensure client to server datagrams are noisy too

So far we've only applied noise to the server to client datagrams. Do the
same thing the other way around.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Add the ability to do client side tracing in quictestlib.c

We add a new flag QTEST_FLAG_CLIENT_TRACE to get debug tracing output if
required.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Extend the noisy dgram test so that packets are also affected by noise

Where multiple packets are in a single datagram we split them so that all
packets can be affected by the noise

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Add a packet splitting BIO

Provide a BIO filter that can split QUIC datagrams containing multiple
packets, such that each packet is in its own datagram.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Use fake time rather than real time in the noisy dgram test

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Add support for timeouts into quictestlib.c

Now that we have a noisy datagram BIO we cannot rely on datagrams always
reliably being delivered in the test framework. We need to start taking
notice of timeouts and handling them appropriately.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Add some optional debug output to the noisy dgram BIO

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Use test_random() to introduce better noise into the noisy dgram BIO

We drop some datagrams, and we delay some datagrams. We can also duplicate
some datagrams.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Extend the nosiy datagram test to send more data

We send several messages between client and server, and server and client,
and also create a new stream.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Add the ability to drop datagrams in the noisy dgram BIO

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Create a noisy dgram test

Create a noisy dgram test that can drop/duplicate/reorder UDP packets and
ensure that the QUIC connection is tolerant of this. At this stage we just
create the outline of the test. Adding in the noise will come in future
commits.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22157)

Add command line option for setting propquery in evp_test

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22151)

Add command line option for setting provider in evp_test

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22151)

Fix test_cms if DSA is not supported

CLA: trivial

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22150)

Fix error handling in lhash contract

When the realloc fails in contract, this not a fatal
error, since the memory is only shrinked. It is also no
option to exit the function at this point, since that
would leave the hash table in an inconsistent state.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22154)

Fix error handling in CRYPTO_get_ex_new_index

If an out of memory error happens when the index zero
is reserved in a newly created ip->meth stack object,
that reservation is not done in a second attempt, which makes
various X_set_ex_data overwrite the value of X_set_app_data.

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22149)

Fix some memory leaks in the openssl app

In some error cases the normal cleanup did not
happen, but instead an exit(1) which caused some
memory leaks, as reported in #22049.

Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/22055)

cmp_vfy.c: Use verification callback if cert_acceptable() finds expired cert

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21656)

doc: change name of OSSL_PROVIDER_load_ex design document

Use dashes instead of underscores, to be more consistent with
existing document names. And speaking of consistency, introduce
a consistent name transformation, which will scale better when
design documents start filling the folder ;-)

    OSSL_PROVIDER_load_ex -> ossl-provider-load-ex.md

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22029)

doc: suggestions for OSSL_PROVIDER_load_ex design document

Late review comments for pull request #21604, sort of.

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22029)

Document the OPENSSL_TEST_RAND_SEED environment variable

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22118)

Enable the ability to seed the test RNG without randomising test ordering

Numerous tests use the test_random() function to get a random number. If a
test fails then the seed that was used for the test RNG is displayed.
Setting the seed to the same value in a future run is supposed to cause the
same random numbers to be generated again.

The way to set the RNG seed again is to use the `OPENSSL_TEST_RAND_ORDER`
environment variable. However setting this environment variable *also*
randomises the test ordering as well as seeding the RNG. This in itself
calls test_random() so, in fact, when the test finally runs it gets
different random numbers to when it originally run (defeating the
repeatability objective).

This means that only way repeatability can be obtained is if the test was
originally run with `OPENSSL_TEST_RAND_ORDER` set to 0. If that wasn't done
then the seed printed when the test failed is not useful.

We introduce a new environment variable `OPENSSL_TEST_RAND_SEED` which can
be used to independently seed the test RNG without randomising the test
ordering. This can be used to get repeatability in cases where test ordering
randomisation was not done in the first place.

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22118)

coverity: NULL dereference

Fixes coverity 1544699.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/22138)

BIO: Wire poll descriptor functions in BIO_s_sock

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)

SSL: Test SSL_get_[rw]poll_descriptor, SSL_net_(read|write)_desired

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)

QUIC: Update documentation for SSL_get_[rw]poll_descriptor, SSL_net_(read|write)_desired

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)

QUIC APL: Wire SSL_get_[rw]poll_descriptor for TLS/DTLS

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)

QUIC: Wire SSL_net_(read|write)_desired for TLS/DTLS

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21979)

Add documentation for the function SSL_CONF_CTX_finish.

Add documentation for the function SSL_CONF_CTX_finish() in man3.

Fixes #22084

Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22128)

os zoo ci

Use a Github Actions expression to set value for the environment
variable.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22130)

enc: "bad decrypt" only in decryption

CLA: trivial

Signed-off-by: Mathieu Tortuyaux <mathieu.tortuyaux@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22134)

Add provider documentation for the new open_ex

Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20131)

Add Test to verify open_ex password checking works

Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20131)

Allow to pass a passprase callback at store open

Some PKCS11 modules require authentication early on to be able to
preload objects, which we want to do to avoid costly roundtrips when the
HSM is actually reached over a network (Cloud HSM).

Unfortunately at open time we can't interact with the user becaue the
callbacks are only passed at object load time. later on.

This patch corrects this issue by providing a more feature rich open
call for providers.

Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20131)

Postponed further context duplication support for ciphers

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22094)

Enhance code safety and readability in SSL_get_shared_ciphers()

This commit introduces two key improvements:

1. Improve code safety by replacing the conditional statement with
`if (n >= size)` and using OPENSSL_strnlen() instead of strlen().
This change ensures proper buffer size handling and adheres to
secure coding practices.

2. Enhance code readability by substituting `strcpy(p, c->name)` with
`memcpy(p, c->name, n)`. This adjustment prioritizes code clarity and
maintenance, even while mitigating a minimal buffer overflow risk.

These enhancements bolster the code's robustness and comprehensibility,
aligning with secure coding principles and best practices.

Fixes #19837

Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21934)

Update OPENSSL_buf2hexstr() to use DEFAULT_SEPARATOR.

CLA: trivial

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22041)

APPS: remove duplicate definition of `trace_data_stack`

Note: It seems like the C compiler doesn't care about the duplicate.
(The first definition is eight lines above.) The C++ compiler however
didn't like it when I reused the tracing code snippets elsewhere.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22117)

Fix new typos found by codespell

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22098)

coveralls.yml: Improve coverage mapping and remove 1.1.1

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22104)

Fix a key repointing in various ciphers

In the dupctx fixups I missed a pointer that needed to be repointed to
the surrounding structures AES_KEY structure for the sm4/aes/aria
ccm/gcm variants.  This caused a colliding use of the key and possible
use after free issues.

Fixes #22076

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22102)

Fix regression in evp_test for provider compat CI

If we ignore the faliure to copy on an old fips provider, we need to use
ctx_base, rather than ctx

Fixes #22076

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22102)

Fix PKCS#12 creation error when certificate contains auxiliary data

Prefer friendly name passed by the caller and calculated local
key id to ones found in certificate auxiliary data when creating
PKCS#12.

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21675)

Store: API for deletion - documentation

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21901)

Store: API for deletion - tests

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21901)

Store: API for deletion - make update

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21901)

Store: API for deletion

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21901)

Fix engine cleanup error handling

Error handling in engine_cleanup_add_first/last was
broken and caused memory leaks.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21971)

Remove use of _Static_assert

We had some use of the C11 _Static_assert feature which can cause some
problems on some platforms. Everywhere we were using it, it is not really
required so remove it.

Fixes #22017

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22091)

Fix build of SHA3 on ARM64 with no-asm

Fixes #22089

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22090)

Use correct version of 3.1 build for FIPS provider.

We're (currently) intending to validate 3.1.2 against FIPS 140-3.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/22088)

Have legacy blake2 EVP structure use base blake2 implementation

For some reason, the code here was made to got through the provider
specific init functions.  This is very very dangerous if the provider
specific functions were to change in any way (such as changes to the
implementation context structure).

Instead, use the init functions from the base blake2 implementations
directly.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22079)

QUIC CHANNEL: Add missing duplicate TPARAM handling cases

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22039)

QUIC MULTISTREAM TEST: Correct trivial bug

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22039)

Fix test/quic_tserver_test.c for slow machines

OSSL_sleep(1) isn't enough of a wait for threads to process the next QUIC
tick, so it gets increased to OSSL_sleep(100).  This may be a tad much,
perhaps, but for now, it gives a good margin.

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22075)

Fix memory leaks in ssl_old_test.c

This fixes a few memory leaks reported in #22049.

If SSL_CTX_set0_tmp_dh_pkey rejects the temp dh key
due to security restrictions (even when @SECLEVEL=0 is used!)
then the caller has to delete the PKEY object.
That is different to how the deprecated
SSL_CTX_set_tmp_dh_pkey was designed to work.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22060)

d2i_ECPKParameters and i2d_ECPKParameters are not deprecated

So do not document them as such.

Fixes #22068

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22069)

Further fix in bio_dgram_test for BIO_s_dgram_mem()

When setting an explicit buffer size using BIO_s_dgram_mem() make sure we
take into account the size of the header (which may be large on NonStop)

Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22058)

Fix a failure in bio_dgram_test on the NonStop platform

The size of the datagram header is significantly larger that we might
expect on NonStop (probably driven by sizeof(BIO_ADDR)). We adjust the
size of the default buffer to take into account the header size and the
mtu.

Fixes #22013

Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22058)

Test that a client that does not supply ALPN fails as expected

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22066)

Ensure QUIC-TLS errors raised during channel start are available to caller

TLS misconfiguration errors should be shown to the application to enable
diagnosis of the problem. Otherwise you just get a generical "internal
error" message.

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22066)

Test we correctly handle missing ALPN from the server

ALPN is a requirement for QUIC so it is an error if the server does not
send it.

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22066)

Fix typos found by codespell

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22063)

Fix a memleak in prepare_rsa_params

This affects only RSA-PSS keys with params using
negative salt legth, or in case of out of memory.
This fixes a memory leak reported in #22049.

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22061)

Add dupctx support to rc4_hmac_md5 algo

Pretty straightforward, just clone the requested context, no pointers to
fixup

Fixes #21887

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21933)

implement dupctx for chacha20_poly1305

Same as chacha20 in the last commit, just clone the ctx and its
underlying tlsmac array if its allocated

Fixes #21887

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21933)

Fix aes_gcm_siv dupctx function

This cipher family has a dupctx function, but was failing because it was
attempting to memdup a field only if it was null

Fix the conditional check to get it working again

Fixes #21887

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21933)

implement dupctx for aes_WRAP methods

create a dupctx method for aes_WRAP implementations of all sizes

Fixes #21887

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21933)

Add dupctx support to aead ciphers

Add dupctx method support to to ciphers implemented with IMPLEMENT_aead_cipher
This includes:
aes-<kbits>-gcm
aria-<kbits>-ccm
aria-<kbits>-gcm
sm4-<kibs>-gcm

Fixes #21887

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21933)

make inability to dup/clone ciphers an error

There should be no reason that a cipher can't be duplicated

Fixes #21887

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21933)

Add a test for SSL_CIPHER_find() when used with a QUIC SSL object

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)

Fix the SSL_CIPHER_find() function when used with a QCSO

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)

Add a test for using a PSK with QUIC

Check that we can set and use a PSK when establishing a QUIC connection.

Fixes openssl/project#83

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/22011)