Lukas Nykryn [Mon, 26 Jun 2017 08:12:46 +0000 (10:12 +0200)]
network/dhclient-script: also parse dot separated $new_classless_static_routes
Previously our dhclient-script expected that $new_classless_static_routes
will have all values separated by a whitespace. But at least on F25
dhclient will put there the destination descriptor in the same format
as it is used by ISC dhcp-server.
For example:
new_classless_static_routes=32.10.198.122.47 192.168.78.4
while our current code expects
new_classless_static_routes=32 10 198 122 47 192 168 78 4
So let's just accept both of these formats by adding "." to IFS.
For details plesse see https://tools.ietf.org/html/rfc3442
"Classless Route Option Format"
Daniel Molkentin [Fri, 16 Jun 2017 14:32:56 +0000 (16:32 +0200)]
98dracut-systemd: Fix module force loading with systemd
This used to work only when specified via the command line
or if systemd was not being used. However, the exisistence of
20_force_driver.conf also requires dracut-pre-udev.service
to be run.
Prarit Bhargava [Mon, 5 Jun 2017 11:51:36 +0000 (07:51 -0400)]
module-setup.sh: Add ARM specific driver to initramfs image
If a hisi_sas storage device is used as / during system install, the
resulting installation will not boot because the hisi_sas driver is not
included in the initramfs.
The Hisilicon storage driver needs to be added to the initramfs image for
aarch64 kernels.
Hans de Goede [Sat, 13 May 2017 15:23:36 +0000 (17:23 +0200)]
drm: Install pwm modules on all architectures
At least on x86 on Bay and Cherry Trail devices the pmw-lpss modules must
be in the initrd too, otherwise the i915 driver will still load, but
it will report the following error:
[drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip
And not register /sys/class/backlight/intel_backlight and users will
not be able to control their backlight.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Adam Williamson [Wed, 3 May 2017 19:32:43 +0000 (12:32 -0700)]
Handle curl using libnssckbi for TLS (RHBZ #1447777)
curl in Fedora recently changed its default CA trust store. The
Fedora package no longer specifies an OpenSSL-format bundle file
during build, and curl itself has been patched to use an NSS
plugin called libnssckbi.so when no bundle file or directory is
specified. There are (at present) two possible providers of the
libnssckbi.so module: the original NSS implementation, which
uses a trust bundle built in at build time, and a compatible
implementation from the p11-kit project, which reads a trust
bundle at run time. So if we find a string in libcurl.so that
suggests libnssckbi might be in use, we must both install it and
make an effort to install any trust bundle files it may use.
The p11-kit libnssckbi implementation does include a string that
lists the top-level trust directories it will use, so we try to
find that string, though the best effort I can come up with will
also find many false positives too. To weed out the false
positives, we check whether the matches actually exist as dirs,
and if so, whether they contain some specific subdirectories we
know p11-kit trust dirs must have (thanks, @kaie). For the NSS
libnssckbi implementation, we will likely wind up not finding any
dirs that match the requirements, so we will simply install the
libnssckbi.so file itself, which is the correct action.
This fixes TLS transactions in the initramfs environment when
using a curl that's built this new way; it's significant for
use of kickstarts and update images with the Fedora / RHEL
installer, as these are retrieved in the initramfs environment,
and are frequently retrieved via HTTPS.
Make binutils optional when elfutils are available
This is intended for minimum host OSes where 36 MB used by binutils
are deemed too expensive. We only need "strip", which exists as eu-strip
in elfutils, which in turn is < 1 MB in size.
Note that the tests (TEST-04-FULL-SYSTEMD/test.sh) still depend on
strip from binutils. It could use sstrip in the future.
Frederick Grose [Sun, 9 Apr 2017 01:01:19 +0000 (21:01 -0400)]
dmsquash-live-root: Avoid mount source conflict on $BASE_LOOPDEV.
The newer mount utilities are more strict about directly shared
devices. For OverlayFS boots, which mount $BASE_LOOPDEV directly,
avoid a mount error by indirectly sharing the read-only base
filesystem through a second, over-attached $BASE_LOOPDEV for
the DM live-base target.
Peter Robinson [Thu, 23 Mar 2017 14:59:15 +0000 (14:59 +0000)]
Add check for aarch64 to the arm kernel module list
This adds the same list of drivers we use for arm platforms for
aarch64 too, also add the DMA drivers there too as they can add
sigficant performance for some storage/usb and often need to be
present when the storage drivers load.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Frederick Grose [Thu, 9 Mar 2017 18:02:58 +0000 (13:02 -0500)]
dmsquash-live-root: Provide enhanced feedback on missing overlay.
Provide a more prominent alert to the user if an overlay is
missing or the overlay module is not available and a temporary
overlay will be provided. This, to avoid losing data intended to
persist.
Frederick Grose [Wed, 1 Feb 2017 05:07:15 +0000 (00:07 -0500)]
Enable the use of the OverlayFS for the LiveOS root filesystem.
Integrate the option to use an OverlayFS as the root filesystem
into the 90dmsquash-live module for testing purposes.
The rd.live.overlay.overlayfs option allows one to request an
OverlayFS overlay. If a persistent overlay is detected at the
standard LiveOS path, the overlay & type detected will be used.
Tested primarily with transient, in-RAM overlay boots on vfat-
formatted Live USB devices, with persistent overlay directories
on ext4-formatted Live USB devices, and with embedded, persistent
overlay directories on vfat-formatted devices. (Persistent overlay
directories on a vfat-formatted device must be in an embedded
filesystem that supports the creation of trusted.* extended
attributes, and must provide valid d_type in readdir responses.)
The rd.live.overlay.readonly option, which allows a persistent
overlayfs to be mounted read only through a higher level transient
overlay directory, has been implemented through the multiple lower
layers feature of OverlayFS.
The default transient DM overlay size has been adjusted up to 32 GiB.
This change supports comparison of transient Device-mapper vs.
transient OverlayFS overlay performance. A transient DM overlay
is a sparse file in memory, so this setting does not consume more
RAM for legacy applications. It does permit a user to use all of
the available root filesystem storage, and fails gently when it is
consumed, as the available free root filesystem storage on a typical
LiveOS build is only a few GiB. Thus, when booted on other-
than-small RAM systems, the transient DM overlay should not overflow.
OverlayFS offers the potential to use all of the available free RAM
or all of the available free disc storage (on non-vfat-devices)
in its overlay, even beyond the root filesystem available space,
because the OverlayFS root filesystem is a union of directories on
two different partitions.
This patch also cleans up some message spew at shutdown, shortens
the execution path in a couple of places, and uses persistent
DM targets where required.
Lukas Nykryn [Tue, 7 Feb 2017 16:09:41 +0000 (17:09 +0100)]
network/ifup: write override file before dhcp_do
Commit cf376023e6d0d4abd9816fa954bb917fc2557713 moved writing .resolv.conf and .override
after dhcp_do, because dhcp_do was overwriting .resolv.conf. But .override does not have
such problem and on the contrary dhcp_do reads .override file if it is present. So let\'s
move it back.
projects / thirdparty / dracut.git / log
