40network/dhclient.conf: rename classless-routes to classless-static-routes
We tell dhclient to name 121 option "classless-routes",
but in dhclient-script we parse classless_static_routes.
So either have to change the configuration or the script.
And since dhclient uses by default classless_static_routes,
let's change the configuration
Harald Hoyer [Mon, 10 Jul 2017 11:28:40 +0000 (13:28 +0200)]
add 90multipath-hostonly module
hardcoding the wwid of the drives in the initramfs causes problems
when the drives are cloned to a system with the same hardware, but
different disk wwid's
Robert Scheck [Thu, 29 Jun 2017 22:15:57 +0000 (00:15 +0200)]
Add NTFS support to 90dmsquash-live module (#191)
Support booting from USB media with NTFS filesystem (optionally),
which removes the FAT32 related 4 GB file size limit for LiveOS/
squashfs.img (and any other file on the same USB media).
Julian Wolf [Tue, 19 Aug 2014 14:23:59 +0000 (16:23 +0200)]
90crypt: Fixed crypttab_contains() to also work with device path in /etc/crypttab
blkid is not available when this function is called, so block_uuid.map is put into
the initrd, mapping block devices from /etc/crypttab to UUIDs.
This fixes a bug where udev rules were created by mistake as crypttab_contains()
returned false for devices specified by path in /etc/crypttab which resulted in
error messages during boot.
Lukas Nykryn [Mon, 26 Jun 2017 08:12:46 +0000 (10:12 +0200)]
network/dhclient-script: also parse dot separated $new_classless_static_routes
Previously our dhclient-script expected that $new_classless_static_routes
will have all values separated by a whitespace. But at least on F25
dhclient will put there the destination descriptor in the same format
as it is used by ISC dhcp-server.
For example:
new_classless_static_routes=32.10.198.122.47 192.168.78.4
while our current code expects
new_classless_static_routes=32 10 198 122 47 192 168 78 4
So let's just accept both of these formats by adding "." to IFS.
For details plesse see https://tools.ietf.org/html/rfc3442
"Classless Route Option Format"
Hannes Reinecke [Thu, 10 Mar 2016 14:45:43 +0000 (15:45 +0100)]
95zfcp_rules: simplified rd.zfcp commandline for NPIV
When NPIV is enabled and the allow_lun_scan parameter is set to 'Y'
the HBA will initiate a LUN scan automatically, so there is no need
to specify the WWPN and LUN number manually.
Hannes Reinecke [Mon, 14 Jul 2014 08:17:07 +0000 (10:17 +0200)]
95zfcp_rules: Enable the device before checking device type
For creating dynamic udev rules parse-dasd.sh look for the device
type in sysfs, which of course does not exist if cio_ignore is
active. So first enable the device before checking.
Hannes Reinecke [Thu, 10 Jul 2014 12:56:54 +0000 (14:56 +0200)]
95zfcp_rules: Store all devices in commandline
'for_each_host_dev_and_slaves' would stop at the first found
device, so the cmdline() call would never list all required
devices. Use 'for_each_host_dev_and_slaves_all' instead and
filter out duplicates.
Hannes Reinecke [Mon, 14 Jul 2014 08:13:53 +0000 (10:13 +0200)]
95dasd_rules: Enable the device before checking device type
For creating dynamic udev rules parse-dasd.sh look for the device
type in sysfs, which of course does not exist if cio_ignore is
active. So first enable the device before checking.
Hannes Reinecke [Thu, 10 Jul 2014 12:56:54 +0000 (14:56 +0200)]
95dasd_rules: Store all devices in commandline
'for_each_host_dev_and_slaves' would stop at the first found
device, so the cmdline() call would never list all required
devices. Use 'for_each_host_dev_and_slaves_all' instead and
filter out duplicates.
Hannes Reinecke [Thu, 26 Jun 2014 08:50:43 +0000 (10:50 +0200)]
95dasd_rules: print out 'rd.dasd' commandline
When a DASD is found to be required for the rootfs we should
be printing out a 'rd.dasd' commandline parameter. This not
only enables us to correctly enable the device with cio_ignore,
we can also inspect the resulting initrd to figure out which
devices are required to mount the rootfs.
Hannes Reinecke [Thu, 26 Jun 2014 08:49:03 +0000 (10:49 +0200)]
95dasd_rules: fixup rd.dasd parsing
There were some errors when rd.dasd parsing, resulting in the
device never to be activated. And we should check for
cio_ignore even if a udev rules has been found.
Hannes Reinecke [Wed, 18 Jun 2014 13:17:21 +0000 (15:17 +0200)]
Correctly set cio_ignore for dynamic s390 rules
When converting 'rd.zfcp' and 'rd.dasd' into udev rules we
need to make sure the enable those device ids via cio_ignore,
otherwise the rules might never be called.
Hannes Reinecke [Tue, 21 Jan 2014 13:32:09 +0000 (14:32 +0100)]
Add new s390x-specific rule files
With the new s390x configuration tool the naming of the udev
rules files have changed. So add these to the existing ones
to be compatible with existing and new installations.
Hannes Reinecke [Wed, 18 Jun 2014 13:17:21 +0000 (15:17 +0200)]
Correctly set cio_ignore for dynamic s390 rules
When converting 'rd.zfcp' and 'rd.dasd' into udev rules we
need to make sure the enable those device ids via cio_ignore,
otherwise the rules might never be called.
Daniel Molkentin [Fri, 16 Jun 2017 14:32:56 +0000 (16:32 +0200)]
98dracut-systemd: Fix module force loading with systemd
This used to work only when specified via the command line
or if systemd was not being used. However, the exisistence of
20_force_driver.conf also requires dracut-pre-udev.service
to be run.
Prarit Bhargava [Mon, 5 Jun 2017 11:51:36 +0000 (07:51 -0400)]
module-setup.sh: Add ARM specific driver to initramfs image
If a hisi_sas storage device is used as / during system install, the
resulting installation will not boot because the hisi_sas driver is not
included in the initramfs.
The Hisilicon storage driver needs to be added to the initramfs image for
aarch64 kernels.
Yu Watanabe [Fri, 2 Jun 2017 09:07:25 +0000 (18:07 +0900)]
kernel-install: Skip to create initrd if /etc/machine-id is missing or empty
From systemd-234, kernel-install plugins are called even if /etc/machine-id
is missing or empty, and in that case BOOT_DIR_ABS is a fake directory.
So, let's skip to create initrd in that case.
Hans de Goede [Sat, 13 May 2017 15:23:36 +0000 (17:23 +0200)]
drm: Install pwm modules on all architectures
At least on x86 on Bay and Cherry Trail devices the pmw-lpss modules must
be in the initrd too, otherwise the i915 driver will still load, but
it will report the following error:
[drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip
And not register /sys/class/backlight/intel_backlight and users will
not be able to control their backlight.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Adam Williamson [Wed, 3 May 2017 19:32:43 +0000 (12:32 -0700)]
Handle curl using libnssckbi for TLS (RHBZ #1447777)
curl in Fedora recently changed its default CA trust store. The
Fedora package no longer specifies an OpenSSL-format bundle file
during build, and curl itself has been patched to use an NSS
plugin called libnssckbi.so when no bundle file or directory is
specified. There are (at present) two possible providers of the
libnssckbi.so module: the original NSS implementation, which
uses a trust bundle built in at build time, and a compatible
implementation from the p11-kit project, which reads a trust
bundle at run time. So if we find a string in libcurl.so that
suggests libnssckbi might be in use, we must both install it and
make an effort to install any trust bundle files it may use.
The p11-kit libnssckbi implementation does include a string that
lists the top-level trust directories it will use, so we try to
find that string, though the best effort I can come up with will
also find many false positives too. To weed out the false
positives, we check whether the matches actually exist as dirs,
and if so, whether they contain some specific subdirectories we
know p11-kit trust dirs must have (thanks, @kaie). For the NSS
libnssckbi implementation, we will likely wind up not finding any
dirs that match the requirements, so we will simply install the
libnssckbi.so file itself, which is the correct action.
This fixes TLS transactions in the initramfs environment when
using a curl that's built this new way; it's significant for
use of kickstarts and update images with the Fedora / RHEL
installer, as these are retrieved in the initramfs environment,
and are frequently retrieved via HTTPS.
projects / thirdparty / dracut.git / log
