Yu Watanabe [Wed, 22 Feb 2023 22:31:01 +0000 (07:31 +0900)]
sd-event: always initialize sd_event.perturb
If the boot ID cannot be obtained, let's first fallback to the machine
ID, and if still cannot, then let's use 0.
Otherwise, no timer event source cannot be triggered.
Frantisek Sumsal [Wed, 22 Feb 2023 19:43:52 +0000 (20:43 +0100)]
sd-journal: fix build with older glibc
In older glibc (like 2.28 on CentOS Stream 8) there is no wrapper
for the gettid() syscall, so we need to provide our own.
../src/libsystemd/sd-journal/journal-send.c: In function ‘close_journal_fd’:
../src/libsystemd/sd-journal/journal-send.c:88:25: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
if (getpid() != gettid())
^~~~~~
getgid
../src/libsystemd/sd-journal/journal-send.c:88:25: warning: nested extern declaration of ‘gettid’ [-Wnested-externs]
cc1: some warnings being treated as errors
Jan Janssen [Sat, 7 Jan 2023 11:03:28 +0000 (12:03 +0100)]
boot: Take advantage of packed device paths
Now that device path types are marked as packed we can safely cast and
access them. If we ever take the address of a member, we would get a
compiler warning.
Jan Janssen [Sat, 7 Jan 2023 10:46:41 +0000 (11:46 +0100)]
boot: Remove some device path helper macros
In gnu-efi/EDK2 device paths are not marked as packed and instead the
Length field is split into 2 bytes. Accessing those requires these
helper macros as device paths may be unaligned.
Since our own efi headers define device path structs as packed, we can
access these directly, making code much more readable.
usec_t is also a uint64_t internally, hence this doesn't actually change
anything. However, on the conceptual level, sd-bus expects a uint64_t
hence give it one.
systemctl: right-align left/passed columns in list-timers
Timespans are probably best right-aligned, in particular if they
systematically end in either " ago" or " left" because they are used as
"relative timestamps".
Yu Watanabe [Wed, 22 Feb 2023 04:26:28 +0000 (13:26 +0900)]
systemctl: show "Until:" field only for service and scope units
Only service and scope units have RuntimeMaxUSec bus property.
To suppress the "Until:" field for other unit types, the entry must be
initialized with USEC_INFINITY.
Typically, in reasonably complex programs we want to realease various
caches (such as glibc allocation caches) in case of memory pressure.
Let's add explicit infrastructure for that to sd-event, that can hook
Linux' Pressure Stall Information (PSI) logic with our event loop.
This adds sd_event_add_memory_pressure() as easy, one-step API to
install an even source that is called under memory pressure.
The parameters which file to watch (the per-cgroup PSI file, or the
system-wide file /proc/pressure/memory) can be configured via env vars.
The idea is that the service manager sooner or later gains controls for
setting this up correctly.
Alternatively to the PSI a similar logic is supported but instead of
waiting for POLLPRI on a procfs/cgroupfs fd we'll wait for POLLIN on
FIFO or AF_UNIX sockets. This is useful for testing, and possibly in
other environments, for example to hook up this protocol directly with
GNOME's low memory monitor.
By default this watches on the cgroup-local PSI so that we aren't
affected by pressure on cgroups we are not related to.
Daan De Meyer [Mon, 20 Feb 2023 19:30:44 +0000 (20:30 +0100)]
copy: Support both inode exclusion and contents exclusion
In some cases, we want to exclude a directory's contents but not
the directory itself. In other cases, we want to exclude a directory
and its contents. Let's extend the denylist logic in copy.h to support
both by changing the denylist from a set to hashmap so we can store the
deny type as the value.
We also modify the repart ExcludeFiles= option to make use of this. If
a directory to exclude ends with a "/", we'll only exclude its contents.
Otherwise, we'll exclude the full directory.
I left this one as a separate commit because it is more involved.
We want people to compile with valgrind support, but we don't want to
use a slow hash function unless we're actually running under valgrind.
So the compile-time check is changed to a runtime check. When compiled
with optimization, the compiler should elide the checks on the constants,
and only leave the check for RUNNING_ON_VALGRIND. It is wrapped with
_unlikely_ so that the else branch is put in the hot path.
meson: merge our two valgrind configuration conditions into one
Most of the support for valgrind was under HAVE_VALGRIND_VALGRIND_H, i.e. we
would enable if the valgrind headers were found. The operations then we be
conditionalized on RUNNING_UNDER_VALGRIND.
But in a few places we had code which was conditionalized on VALGRIND, i.e. the
config option. I noticed because I compiled with -Dvalgrind=true on a machine
that didn't have valgrind.h, and the build failed because
RUNNING_UNDER_VALGRIND was not defined. My first idea was to add a check that
the header is present if the option is set, but it seems better to just remove
the option. The code to support valgrind is trivial, and if we're
!RUNNING_UNDER_VALGRIND, it has negligible cost. And the case of running under
valgrind is always some special testing/debugging mode, so we should just do
those extra steps to make valgrind output cleaner. Removing the option makes
things simpler and we don't have to think if something should be covered by the
one or the other configuration bit.
I had a vague recollection that in some places we used -Dvalgrind=true not
for valgrind support, but to enable additional cleanup under other sanitizers.
But that code would fail to build without the valgrind headers anyway, so
I'm not sure if that was still used. If there are uses like that, we can
extend the condition for cleanup_pools().
There are three conditionalizations in the status quo ante function,
which kinda indicates this should not be the same function in the first
place. Hence split this up, simplify it, and have two distinct functions
without conditionalizations.
Jan Janssen [Sat, 7 Jan 2023 08:19:23 +0000 (09:19 +0100)]
boot: Do not use errno.h/inttypes.h
These are provided by libc instead of the compiler and are not supposed
to be used in freestanding environments.
When cross-compiling with clang and the corresponding gcc
cross-toolchain is not around, clang may pick up the wrong header from
the host system.
On aarch64 we end up with a nonexecutable stack, but on ia32 and x64 we get one,
so this might be just a matter of defaults in the linker. It doesn't matter
greatly, but let's mark the stack as non-executable to avoid the warning.
Note: '-Wl,-z' is not needed, things work with just '-z'.
Mike Yuan [Mon, 20 Feb 2023 12:12:19 +0000 (20:12 +0800)]
sleep: check if we're on AC power before checking battery capacity
Before this commit, battery_is_low() returns
true if there's no battery on the system.
It's now modified to check if the system is
on AC power first, and returns false early
if that's the case.
We already have this nice code in system that determines the block
device backing the root file system, but it's only used internally in
systemd-gpt-generator. Let's make this more accessible and expose it
directly in bootctl.
It doesn't fit immediately into the topic of bootctl, but I think it's
close enough and behaves very similar to the existing "bootctl
--print-boot-path" and "--print-esp-path" tools.
If --print-root-device (or -R) is specified once, will show the block device
backing the root fs, and if specified twice (probably easier: -RR) it
will show the whole block device that block device belongs to in case it
is a partition block device.
Suggested use:
# cfdisk `bootctl -RR`
To get access to the partition table, behind the OS install, for
whatever it might be.
Daan De Meyer [Tue, 21 Feb 2023 14:09:38 +0000 (15:09 +0100)]
mkosi: Move more logic to the postinst script
Let's move stuff that only applies to the final image to the
postinst script. Let's also move out some of the static files to
mkosi.extra/ instead of hardcoding them in scripts.
Jan Janssen [Fri, 27 Jan 2023 11:57:35 +0000 (12:57 +0100)]
meson: Add simple_tests list
A lot of tests can be defined by just their filename. Moving into their
own list keeps things simpler, especially with the next commit. It also
makes it easier to keep the lists sorted.
Jan Janssen [Fri, 6 Jan 2023 17:07:18 +0000 (18:07 +0100)]
boot: Provide our own EFI API headers
We want to get away from gnu-efi and the only really usable source of
EFI headers would be EDK2, which is somewhat impractical to use and
quite large to require to be around just for some headers.
As a bonus point, the new headers are safe to be included in userspace
code.
This should not have any behavior changes as it is mostly changing
header includes. There are some renames to conform to standard names
and a few minor device path fixups as the struct is defined slightly
different.
Of note is that this removes usage of uchar.h and wchar.h as they are
not guaranteed to be available in a freestanding environment. Instead
efi.h will provide the needed types.
I'm not sure what "suffix" was meant by this comment, but the file has the usual suffix.
The file was added with the current name back in c4708f132381e4bbc864d5241381b5cde4f54878.
Maybe an earlier version of the patch did something different.
projects / thirdparty / systemd.git / log
