target/loongarch: Use explicit little-endian LD/ST API
The LoongArch architecture uses little endianness. Directly
use the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/loongarch/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-13-philmd@linaro.org>
linux-user/i386: Use explicit little-endian LD/ST API
The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-4-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The AVR architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/avr/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-11-philmd@linaro.org>
The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/i386/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-9-philmd@linaro.org>
target/hexagon: Use explicit little-endian LD/ST API
The Hexagon architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/hexagon/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-8-philmd@linaro.org>
target/alpha: Use explicit little-endian LD/ST API
The Alpha architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/alpha/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-7-philmd@linaro.org>
The Alpha target is only built for 64-bit.
Using ldtul_p() is pointless, replace by ldq_p().
Mechanical change doing:
$ sed -i -e 's/ldtul_p/ldq_p/' $(git grep -wl ldtul_p target/alpha/)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-3-philmd@linaro.org>
Last use of memop_big_endian() was removed in commit 592134617c9
("accel/tcg: Reorg system mode store helpers").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-3-philmd@linaro.org>
Better undefined macros once we are done with them,
like we do few lines later with DO_STN_LDN_P().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-2-philmd@linaro.org>
* tag 'chr-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
tests/unit/test-char: implement a few mux remove test cases
chardev/mux: implement detach of frontends from mux
chardev/mux: switch mux frontends management to bitset
chardev/mux: introduce `mux_chr_attach_frontend() call
chardev/mux: convert size members to unsigned int
chardev/mux: use bool type for `linestart` and `term_got_escape`
chardev/chardev-internal: remove unused `max_size` struct member
chardev/char: fix qemu_chr_is_busy() check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Roman Penyaev [Mon, 14 Oct 2024 15:24:08 +0000 (17:24 +0200)]
tests/unit/test-char: implement a few mux remove test cases
This patch tests:
1. feasibility of removing mux which does not have frontends attached
or frontends were prior detached.
2. inability to remove mux which has frontends attached (mux is "busy")
Roman Penyaev [Mon, 14 Oct 2024 15:24:06 +0000 (17:24 +0200)]
chardev/mux: switch mux frontends management to bitset
Frontends can be attached and detached during run-time (although detach
is not implemented, but will follow). Counter variable of muxes is not
enough for proper attach/detach management, so this patch implements
bitset: if bit is set for the `mux_bitset` variable, then frontend
device can be found in the `backend` array (yes, huge confusion with
backend and frontends names).
Roman Penyaev [Mon, 14 Oct 2024 15:24:04 +0000 (17:24 +0200)]
chardev/mux: convert size members to unsigned int
There is no sense to keep `focus`, `mux_cnt`, `prod`, `cons`
and `tag` variables as signed, those represent either size,
either position in array, which both are unsigned.
`focus` member of `MuxChardev` is kept signed, because initially
set to -1.
Roman Penyaev [Mon, 14 Oct 2024 15:24:01 +0000 (17:24 +0200)]
chardev/char: fix qemu_chr_is_busy() check
`mux_cnt` struct member never goes negative or decrements,
so mux chardev can be !busy only when there are no
frontends attached. This patch fixes the always-true
check.
Fixes: a4afa548fc6d ("char: move front end handlers in CharBackend") Signed-off-by: Roman Penyaev <r.peniaev@gmail.com> Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com> Cc: qemu-devel@nongnu.org Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-2-r.peniaev@gmail.com>
* tag 'ui-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
audio/pw: Report more accurate error when connecting to PipeWire fails
tests: add basic -display dbus Map.Unix test
ui: refactor using a common qemu_pixman_shareable
virtio-gpu: allocate shareable 2d resources on !win32
ui/dbus: implement Unix.Map
ui/dbus: add Listener.Unix.Map interface XML
ui/dbus: make Listener.Win32.Map win32-specific
meson: find_program('gdbus-codegen') directly
ui/surface: allocate shared memory on !win32
ui/dbus: add trace for can_share_map
ui/dbus: do not limit to one listener per connection / bus name
ui/pixman: generalize shared_image_destroy
util/memfd: report potential errors on free
ui/dbus: discard pending CursorDefine on new one
ui/dbus: discard display messages on disable
ui/dbus: fix filtering all update messages
ui/win32: fix potential use-after-free with dbus shared memory
ui/dbus: fix leak on message filtering
hw/audio/hda: fix memory leak on audio setup
hw/audio/hda: free timer on exit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tests: update lcitool to fix freebsd py311-yaml rename
This addresses the py311-yaml -> py311-pyyaml rename in FreeBSD.
The change to the OpenSUSE dockerfile is something that will allow
QEMU to access rust bindgen in future.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241014130255.10119-1-berrange@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Mon, 14 Oct 2024 11:01:13 +0000 (13:01 +0200)]
configure, meson: synchronize defaults for configure and Meson Rust options
If the defaults for --enable-rust ($rust in configure) and Meson's rust
option are out of sync, incremental builds will pick Meson's default.
This happens because, on an incremental build, configure does not run
Meson, Make does instead. Meson then gets the command line options
from either coredata.dat (which has everything cached in Python's pickle
format) or cmd_line.txt (slow path when Meson version is upgraded), but
neither knows about the rust option, and the meson_options.txt default
is used.
This will cause have_rust to be true if rustc is available; and the build
to fail because configure did not put a RUST_TARGET_TRIPLE in config-host.mak.
When in the Rust pull request I changed the $rust default from auto
to disabled, I should have made the same change to meson_options.txt;
do it now.
Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reported-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241014110113.173946-1-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Mon, 14 Oct 2024 14:36:40 +0000 (16:36 +0200)]
meson: check in main meson.build for native Rust compiler
A working native Rust compiler is always needed in order to compile Rust
code, even when cross compiling, in order to build the procedural macros
that QEMU uses.
Right now, the check is done in rust/qemu-api-macros/meson.build, but this
has two disadvantages. First, it makes the build fail when the Meson "rust"
option is set to "auto" (instead, Rust support should be disabled). Second,
add_languages() is one of the few functions that are executed even by
"meson introspect", except that "meson introspect" executes both branches
of "if" statements! Therefore, "meson introspect" tries to look for a
Rust compiler even if the option is disabled---and then fails because
the compiler is required by rust/qemu-api-macros/meson.build. This is
visible for example if the compilation host has a stale
scripts/meson-buildoptions.sh and no rustc installed.
Both issues can be fixed by moving the check to the main meson.build,
together with the check for the cross compiler.
Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Michal Privoznik [Wed, 18 Sep 2024 08:17:06 +0000 (10:17 +0200)]
audio/pw: Report more accurate error when connecting to PipeWire fails
According to its man page [1], pw_context_connect() sets errno on
failure:
Returns a Core on success or NULL with errno set on error.
It may be handy to see errno when figuring out why PipeWire
failed to connect. That leaves us with just one possible path to
reach 'fail_error' label which is then moved to that path and
also its error message is adjusted slightly.
virtio-gpu: allocate shareable 2d resources on !win32
Similar to what was done in commit 9462ff46 ("virtio-gpu/win32: allocate
shareable 2d resources/images") for win32, allocate resource memory with
memfd, so the associated display surface memory can be shared with a
different process.
gio.pc variable is a bit bogus in context of cross-compilation, since it
contains an absolute path, relative to the sysroot directory. On Fedora, it ends
up as:
/usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig/usr/bin/gdbus-codegen
path which does not exist because it is not shipped by Fedora mingw
packages.
Instead, we can rely on meson find_program() behaviour to do a better
job based on its search order and capabilities.
Use qemu_memfd_alloc() to allocate the display surface memory, which
will fallback on tmpfile/mmap() on systems without memfd, and allow to
share the display with other processes.
This is similar to how display memory is allocated on win32 since commit 09b4c198 ("console/win32: allocate shareable display surface").
ui/win32: fix potential use-after-free with dbus shared memory
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
When SET_STREAM_FORMAT is called, we should clear the existing setup.
Factor out common function to close a stream.
Direct leak of 144 byte(s) in 3 object(s) allocated from:
#0 0x7f91d38f7350 in calloc (/lib64/libasan.so.8+0xf7350) (BuildId: a4ad7eb954b390cf00f07fa10952988a41d9fc7a)
#1 0x7f91d2ab7871 in g_malloc0 (/lib64/libglib-2.0.so.0+0x64871) (BuildId: 36b60dbd02e796145a982d0151ce37202ec05649)
#2 0x562fa2f447ee in timer_new_full /home/elmarco/src/qemu/include/qemu/timer.h:538
#3 0x562fa2f4486f in timer_new /home/elmarco/src/qemu/include/qemu/timer.h:559
#4 0x562fa2f448a9 in timer_new_ns /home/elmarco/src/qemu/include/qemu/timer.h:577
#5 0x562fa2f47955 in hda_audio_setup ../hw/audio/hda-codec.c:490
#6 0x562fa2f4897e in hda_audio_command ../hw/audio/hda-codec.c:605
* tag 'pull-tcg-20241013' of https://gitlab.com/rth7680/qemu: (27 commits)
target/arm: Fix alignment fault priority in get_phys_addr_lpae
target/arm: Implement TCGCPUOps.tlb_fill_align
target/arm: Move device detection earlier in get_phys_addr_lpae
target/arm: Pass MemOp to get_phys_addr_lpae
target/arm: Pass MemOp through get_phys_addr_twostage
target/arm: Pass MemOp to get_phys_addr_nogpc
target/arm: Pass MemOp to get_phys_addr_gpc
target/arm: Pass MemOp to get_phys_addr_with_space_nogpc
target/arm: Pass MemOp to get_phys_addr
target/hppa: Implement TCGCPUOps.tlb_fill_align
target/hppa: Handle alignment faults in hppa_get_physical_address
target/hppa: Fix priority of T, D, and B page faults
target/hppa: Perform access rights before protection id check
target/hppa: Add MemOp argument to hppa_get_physical_address
accel/tcg: Use the alignment test in tlb_fill_align
accel/tcg: Add TCGCPUOps.tlb_fill_align
include/exec/memop: Introduce memop_atomicity_bits
include/exec/memop: Rename get_alignment_bits
include/exec/memop: Move get_alignment_bits from tcg.h
accel/tcg: Assert noreturn from write-only page for atomics
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Fix alignment fault priority in get_phys_addr_lpae
Now that we have the MemOp for the access, we can order
the alignment fault caused by memory type before the
permission fault for the page.
For subsequent page hits, permission and stage 2 checks
are known to pass, and so the TLB_CHECK_ALIGNED fault
raised in generic code is not mis-ordered.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/arm: Move device detection earlier in get_phys_addr_lpae
Determine cache attributes, and thence Device vs Normal memory,
earlier in the function. We have an existing regime_is_stage2
if block into which this can be slotted.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/hppa: Perform access rights before protection id check
In Chapter 5, Interruptions, the group 3 exceptions lists
"Data memory access rights trap" in priority order ahead of
"Data memory protection ID trap".
Swap these checks in hppa_get_physical_address.
Reviewed-by: Helge Deller <deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Use the alignment test in tlb_fill_align
When we have a tlb miss, defer the alignment check to
the new tlb_fill_align hook. Move the existing alignment
check so that we only perform it with a tlb hit.
Reviewed-by: Helge Deller <deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new callback to handle softmmu paging. Return the page
details directly, instead of passing them indirectly to
tlb_set_page. Handle alignment simultaneously with paging so
that faults are handled with target-specific priority.
Route all calls of the two hooks through a tlb_fill_align
function local to cputlb.c.
As yet no targets implement the new hook.
As yet cputlb.c does not use the new alignment check.
Reviewed-by: Helge Deller <deller@gmx.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thomas Huth [Fri, 11 Oct 2024 16:18:45 +0000 (18:18 +0200)]
linux-user/vm86: Fix compilation with Clang
Since commit 95b9c27c81 ("linux-user: Remove unused handle_vm86_fault")
a bunch of other "static inline" function are now unused, too. Clang
warns about such unused "static inline" functions in .c files, so the
build currently breaks when compiling with "--enable-werror". Remove
the unused functions to get it going again.
Fixes: 95b9c27c81 ("linux-user: Remove unused handle_vm86_fault") Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20241011161845.417342-1-thuth@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that orig_ax is exposed and GDB is happy, don't skip
test-proc-mappings.py on i386. In fact, it's broken only on
m68k now, so skip only this architecture.
Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240912093012.402366-6-iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Paolo Bonzini [Thu, 10 Oct 2024 08:36:41 +0000 (10:36 +0200)]
tcg: remove singlestep_enabled from DisasContextBase
It is used in a couple of places only, both within the same target.
Those can use the cflags just as well, so remove the separate field.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010083641.1785069-1-pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
docs: use consistent markup for footnotes
docs: avoid footnotes consisting of just URLs
docs: fix invalid footnote syntax
gitlab-ci: add Rust-enabled CI job
dockerfiles: add a Dockerfile using a nightly Rust toolchain
meson: ensure -mcx16 is passed when detecting ATOMIC128
meson: define qemu_isa_flags
meson: fix machine option for x86_version
rust: add PL011 device model
rust: add utility procedural macro crate
scripts/archive-source: find directory name for subprojects
rust: add crate to expose bindings and interfaces
meson.build: add HAVE_GLIB_WITH_ALIGNED_ALLOC flag
.gitattributes: add Rust diff and merge attributes
rust: add bindgen step as a meson dependency
configure, meson: detect Rust toolchain
build-sys: Add rust feature option
Require meson version 1.5.0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Fri, 11 Oct 2024 09:45:46 +0000 (11:45 +0200)]
docs: use consistent markup for footnotes
Unfortunately, the definition of the footnote syntax requires
the author to use the awkward escaped space "\ " in the really common
case of "footnote marker at end of word or sentence"; and in fact the rST
documentation's examples of footnote syntax contain only artificial
examples that do *not* use the syntax. This resulted in ugly rendering
of footnotes throughout QEMU's documentation. Ensure the space is escaped
whenever the footnote must attach to the preceding word, and also use
a named reference for clarity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 11 Oct 2024 09:27:21 +0000 (11:27 +0200)]
docs: avoid footnotes consisting of just URLs
Replace the footnotes with inline links whenever the footnote text
consists of nothing but the URL. While at it, make the link texts
consistent in the surrounding areas, for example avoiding usage of
"here" for the link's text.
In the case of acpi-bits.rst this fixes a build failure with Sphinx
8.1.0, because the FOSDEM link was duplicated in the paragraph and the
new version is a lot stricter about unreferenced footnotes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 7 Oct 2024 14:41:15 +0000 (16:41 +0200)]
gitlab-ci: add Rust-enabled CI job
Add a job using --enable-rust, to ensure that the toolchain is installed
correctly by the Dockerfile and that QEMU builds with Rust enabled on
at least one platform.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 7 Oct 2024 14:36:59 +0000 (16:36 +0200)]
dockerfiles: add a Dockerfile using a nightly Rust toolchain
This will be useful in order to test QEMU's Rust code with nightly
clippy. It can also be used to check that the code builds, until the
minimum supported Rust version is lowered enough to allow enabling Rust
in other Dockerfiles too.
Use a separate container, instead of the Fedora one, to avoid that
CI breaks for everyone if for some reason the rustup build turns out
to be shaky.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sun, 6 Oct 2024 07:44:00 +0000 (09:44 +0200)]
meson: ensure -mcx16 is passed when detecting ATOMIC128
Moving -mcx16 out of CPU_CFLAGS caused the detection of ATOMIC128 to
fail, because flags have to be specified by hand in cc.compiles and
cc.links invocations (why oh why??).
Ensure that these tests enable all the instruction set extensions that
will be used to build the emulators.
Fixes: c2bf2ccb266 ("configure: move -mcx16 flag out of CPU_CFLAGS", 2024-05-24) Reported-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 10 Oct 2024 14:11:28 +0000 (16:11 +0200)]
rust: add PL011 device model
This commit adds a re-implementation of hw/char/pl011.c in Rust.
How to build:
1. Configure a QEMU build with:
--enable-system --target-list=aarch64-softmmu --enable-rust
2. Launching a VM with qemu-system-aarch64 should use the Rust version
of the pl011 device
This commit adds a helper crate library, qemu-api-macros for derive (and
other procedural) macros to be used along qemu-api.
It needs to be a separate library because in Rust, procedural macros, or
macros that can generate arbitrary code, need to be special separate
compilation units.
Only one macro is introduced in this patch, #[derive(Object)]. It
generates a constructor to register a QOM TypeInfo on init and it must
be used on types that implement qemu_api::definitions::ObjectImpl trait.
Paolo Bonzini [Thu, 10 Oct 2024 14:26:35 +0000 (16:26 +0200)]
scripts/archive-source: find directory name for subprojects
Rust subprojects have the semantic version (followed by -rs) in the subproject
name, but the full version (without -rs) is used by crates.io for the root
directory of the tarball. Teach scripts/archive-source.sh to look for the
root directory name in wrap files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
meson.build: add HAVE_GLIB_WITH_ALIGNED_ALLOC flag
Rust crates, introduced from the next commit onwards, can optionally use
the glib allocator API and need to know whether g_aligned_alloc etc are
available.
This commit adds a define in config_host_data that depends on glib
version >= 2.72.
.gitattributes: add Rust diff and merge attributes
Set rust source code to diff=rust (built-in with new git versions)
and merge=binary for Cargo.lock files (they should not be merged but
auto-generated by cargo)
Paolo Bonzini [Thu, 3 Oct 2024 13:28:45 +0000 (16:28 +0300)]
configure, meson: detect Rust toolchain
Include the correct path and arguments to rustc in the native
and cross files (native compilation is needed for procedural
macros).
Based on the host architecture and OS, the compiler and optionally the argument
to --cpu, the Rust target triple can be detected automatically for either a
native or a cross compiler.
In general, it is only a matter of translating the architecture and OS, and
adding a machine to form the triple, but there are some special cases (e.g.
detecting soft vs. hard floating point on ARM) and some inconsistencies.
* tag 'crypto-fixes-pull-request' of https://gitlab.com/berrange/qemu:
tests/unit: Add a assert for test_io_channel_unix_listen_cleanup
crypto: drop obsolete back compat logic for old nettle
crypto/hashpriv: Remove old hash API function
crypto/hash-afalg: Remove old hash API functions
crypto/hash-nettle: Remove old hash API functions
crypto/hash-gnutls: Remove old hash API functions
crypto/hash-gcrypt: Remove old hash API functions
crypto/hash-glib: Remove old hash API functions
tests/unit/test-crypto-hash: accumulative hashing
crypto/hash: Implement and use new hash API
crypto/hash-afalg: Implement new hash API
util/iov: Introduce iov_send_recv_with_flags()
crypto/hash-nettle: Implement new hash API
crypto/hash-gnutls: Implement new hash API
crypto/hash-gcrypt: Implement new hash API
crypto/hash-glib: Implement new hash API
crypto: accumulative hashing API
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kunwu [Thu, 10 Oct 2024 02:34:55 +0000 (10:34 +0800)]
tests/unit: Add a assert for test_io_channel_unix_listen_cleanup
Calling bind without checking return value. Add a assert for it.
Signed-off-by: Kunwu <chentao@kylinos.cn> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
crypto: drop obsolete back compat logic for old nettle
The nettle 2.x series declared all the hash functions with 'int' for
the data size. Since we dropped support for anything older than 3.4
we can assume nettle is using 'size_t' and thus avoid the back compat
looping logic.
Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alejandro Zeise [Tue, 8 Oct 2024 07:57:22 +0000 (09:57 +0200)]
crypto/hashpriv: Remove old hash API function
Remove old hash_bytesv function, as it was replaced by the 4
new functions.
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alejandro Zeise [Tue, 8 Oct 2024 07:57:21 +0000 (09:57 +0200)]
crypto/hash-afalg: Remove old hash API functions
Removes the old hash API functions in the afalg driver,
and modifies the hmac function to use the new helper functions.
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ clg: - Checkpatch fixes ] Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alejandro Zeise [Tue, 8 Oct 2024 07:57:20 +0000 (09:57 +0200)]
crypto/hash-nettle: Remove old hash API functions
Removes old hash implementation in the nettle hash driver.
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ clg: - Fixed spelling in commit log ] Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alejandro Zeise [Tue, 8 Oct 2024 07:57:19 +0000 (09:57 +0200)]
crypto/hash-gnutls: Remove old hash API functions
Removes old hash implementation in the gnutls hash driver.
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ clg: - Fixed spelling in commit log ] Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alejandro Zeise [Tue, 8 Oct 2024 07:57:18 +0000 (09:57 +0200)]
crypto/hash-gcrypt: Remove old hash API functions
Removes old hash implementation in the gcrypt hash driver.
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ clg: - Fixed spelling in commit log ] Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alejandro Zeise [Tue, 8 Oct 2024 07:57:17 +0000 (09:57 +0200)]
crypto/hash-glib: Remove old hash API functions
Removes old hash implement-ion in the GLib hash driver.
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ clg: - Fixed spelling in commit log ] Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Alejandro Zeise [Tue, 8 Oct 2024 07:57:16 +0000 (09:57 +0200)]
tests/unit/test-crypto-hash: accumulative hashing
Added an accumulative hashing test. Checks for functionality of
the new hash create, update, finalize and free functions.
Signed-off-by: Alejandro Zeise <alejandro.zeise@seagate.com>
[ clg: - Improved test_hash_accumulate() with g_autofree variables ] Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
projects / thirdparty / qemu.git / log
