While working on the serve-stale backports, I noticed the following
oddities:
1. In the serve-stale system test, in one case we keep track of the
time how long it took for dig to complete. In commit aaed7f9d8c2465790d769221dfe8378c7147f5eb, the code removed the
exception to check for result == ISC_R_SUCCESS on stale found
answers, and adjusted the test accordingly. This failed to update
the time tracking accordingly. Move the t1/t2 time track variables
back around the two dig commands to ensure the lookups resolved
faster than the resolver-query-timeout.
2. We can remove the setting of NS_QUERYATTR_STALEOK and
DNS_RDATASETATTR_STALE_ADDED on the "else if (stale_timeout)"
code path, because they are added later when we know we have
actually found a stale answer on a stale timeout lookup.
3. We should clear the NS_QUERYATTR_STALEOK flag from the client
query attributes instead of DNS_RDATASETATTR_STALE_ADDED (that
flag is set on the rdataset attributes).
4. In 'bin/named/config.c' we should set the configuration options
in alpabetical order.
5. In the ARM, in the backports we have added "(stale)" between
"cached" and "RRset" to make more clear a stale RRset may be
returned in this scenario.
Michał Kępień [Wed, 28 Apr 2021 05:56:47 +0000 (07:56 +0200)]
Warn when log files grow too big in system tests
Exerting excessive I/O load on the host running system tests should be
avoided in order to limit the number of false positives reported by the
system test suite. In some cases, running named with "-d 99" (which is
the default for system tests) results in a massive amount of logs being
generated, most of which are useless. Implement a log file size check
to draw developers' attention to overly verbose named instances used in
system tests. The warning threshold of 200,000 lines was chosen
arbitrarily.
Michał Kępień [Wed, 28 Apr 2021 05:56:47 +0000 (07:56 +0200)]
Prevent useless logging in the "tcp" system test
The regression test for CVE-2020-8620 causes a lot of useless messages
to be logged. However, globally decreasing the log level for the
affected named instance would be a step too far as debugging information
may be useful for troubleshooting other checks in the "tcp" system test.
Starting a separate named instance for a single check should be avoided
when possible and thus is also not a good solution. As a compromise,
run "rndc trace 1" for the affected named instance before starting the
regression test for CVE-2020-8620.
Michał Kępień [Wed, 28 Apr 2021 05:56:47 +0000 (07:56 +0200)]
Limit logging for verbose system tests
The system test framework starts all named instances with the "-d 99"
command line option (unless it is overridden by a named.args file in a
given instance's working directory). This causes a lot of log messages
to be written to named.run files - currently over 5 million lines for a
single test suite run. While debugging information preserved in the log
files is essential for troubleshooting intermittent test failures, some
system tests involve sending hundreds or even thousands of queries,
which causes the relevant log files to explode in size. When multiple
tests (or even multiple test suites) are run in parallel, excessive
logging contributes considerably to the I/O load on the test host,
increasing the odds of intermittent test failures getting triggered.
Decrease the debug level for the seven most verbose named instances:
- use "-d 3" for ns2 in the "cacheclean" system test (it is the lowest
logging level at which the test still passes without the need to
apply any changes to tests.sh),
- use "-d 1" for the other six named instances.
This roughly halves the number of lines logged by each test suite run
while still leaving enough information in the logs to allow at least
basic troubleshooting in case of test failures.
This approach was chosen as it results in a greater decrease in the
number of lines logged than running all named instances with "-d 3",
without causing any test failures.
Diego Fronza [Thu, 1 Apr 2021 20:03:59 +0000 (17:03 -0300)]
Add malloc attribute to memory allocation functions
The malloc attribute allows compiler to do some optmizations on
functions that behave like malloc/calloc, like assuming that the
returned pointer do not alias other pointers.
Diego Fronza [Thu, 1 Apr 2021 19:48:16 +0000 (16:48 -0300)]
Removed unnecessary check (mpctx->items == NULL)
There is no possibility for mpctx->items to be NULL at the point where
the code was removed, since we enforce that fillcount > 0, if
mpctx->items == NULL when isc_mempool_get is called, then we will
allocate fillcount more items and add to the mpctx->items list.
Diego Fronza [Mon, 29 Mar 2021 17:04:12 +0000 (14:04 -0300)]
Fix following up lookup failure if more resolvers are available
_query_detach function was incorrectly unliking the query object from
the lookup->q query list, this made it impossible to follow a query
lookup failure with the next one in the list (possibly using a separate
resolver), as the link to the next query in the list was dissolved.
Fix by unliking the node only when the query object is about to be
destroyed, i.e. there is no more references to the object.
When the keymgr needs to create new keys, it is possible it needs to
create multiple keys. The keymgr checks for keyid conflicts with
already existing keys, but it should also check against that it just
created.
Michał Kępień [Mon, 26 Apr 2021 05:16:38 +0000 (07:16 +0200)]
Test "--without-gssapi" in GitLab CI
GitLab CI pipelines do not currently include a Linux job that would have
GSSAPI support disabled. Add the "--without-gssapi" option to the
./configure invocation on Debian 9 to address that deficiency and also
to continuously test that build-time switch.
Michał Kępień [Mon, 26 Apr 2021 05:16:38 +0000 (07:16 +0200)]
Test "tkey-gssapi-credential" conditionally
If "tkey-gssapi-credential" is set in the configuration and GSSAPI
support is not available, named will refuse to start. As the test
system framework does not support starting named instances
conditionally, ensure that "tkey-gssapi-credential" is only present in
named.conf if GSSAPI support is available.
as with TLS, the destruction of a client stream on failed read
needs to be conditional: if we reached failed_read_cb() as a
result of a timeout on a timer which has subsequently been
reset, the stream must not be closed.
Michał Kępień [Fri, 23 Apr 2021 12:26:48 +0000 (14:26 +0200)]
Test handling of non-apex RRSIG(SOA) RRsets
Add a check to the "dnssec" system test which ensures that RRSIG(SOA)
RRsets present anywhere else than at the zone apex are automatically
removed after a zone containing such RRsets is loaded.
Mark Andrews [Thu, 8 Apr 2021 00:49:28 +0000 (10:49 +1000)]
Be more precise with the stopping conditions in zone_resigninc
If there happens to be a RRSIG(SOA) that is not at the zone apex
for any reason it should not be considered as a stopping condition
for incremental zone signing.
the destruction of the socket in tls_failed_read_cb() needs to be
conditional; if reached due to a timeout on a timer that has
subsequently been reset, the socket must not be destroyed.
this is similar in structure to the UDP timeout recovery test.
this commit adds a new mechanism to the netmgr test allowing the
listen socket to accept incoming TCP connections but never send
a response. this forces the client to time out on read.
when running read callbacks, if the event result is not ISC_R_SUCCESS,
the callback is always run asynchronously. this is a problem on timeout,
because there's no chance to reset the timer before the socket has
already been destroyed. this commit allows read callbacks to run
synchronously for both ISC_R_SUCCESS and ISC_R_TIMEDOUT result codes.
this test sets up a server socket that listens for UDP connections
but never responds. the client will always time out; it should retry
five times before giving up.
Diego Fronza [Mon, 19 Apr 2021 17:23:31 +0000 (14:23 -0300)]
Add system test for the deadlock fix
The test spawns 4 parallel workers that keep adding, modifying and
deleting zones, the main thread repeatedly checks wheter rndc
status responds within a reasonable period.
While environment and timing issues may affect the test, in most
test cases the deadlock that was taking place before the fix used to
trigger in less than 7 seconds in a machine with at least 2 cores.
5. `rmzone` event is called from some worker's `dispatch()`, `rmzone`
blocks waiting for the same lock.
6. `do_addzone` calls `isc_task_beginexclusive`.
7. Deadlock triggered, since:
- `rmzone` is wating for the lock.
- `isc_task_beginexclusive` is waiting for (no. workers - 1) to
be halted
- since `rmzone` event is blocked it won't allow the worker to halt.
To fix this, we updated do_addzone code to call isc_task_beginexclusive
before the lock is acquired, we postpone locking to the nearest required
place, same for isc_task_beginexclusive.
The same could happen with rndc modzone, so that was addressed as well.
Petr Špaček [Fri, 16 Apr 2021 16:05:43 +0000 (18:05 +0200)]
Add tests for the "tkey-gssapi-credential" option
Four named instances in the "nsupdate" system test have GSS-TSIG support
enabled. All of them currently use "tkey-gssapi-keytab". Configure two
of them with "tkey-gssapi-credential" to test that option.
As "tkey-gssapi-keytab" and "tkey-gssapi-credential" both provide the
same functionality, no test modifications are required. The difference
between the two options is that the value of "tkey-gssapi-keytab" is an
explicit path to the keytab file to acquire credentials from, while the
value of "tkey-gssapi-credential" is the name of the principal whose
credentials should be used; those credentials are looked up in the
keytab file expected by the Kerberos library, i.e. /etc/krb5.keytab by
default. The path to the default keytab file can be overridden using by
setting the KRB5_KTNAME environment variable. Utilize that variable to
use existing keytab files with the "tkey-gssapi-credential" option.
The KRB5_KTNAME environment variable should not interfere with the
"tkey-gssapi-keytab" option. Nevertheless, rename one of the keytab
files used with "tkey-gssapi-keytab" to something else than the contents
of the KRB5_KTNAME environment variable in order to make sure that both
"tkey-gssapi-keytab" and "tkey-gssapi-credential" are actually tested.
Update the configure.ac for autoconf >= 2.71 compatibility
This mostly removes stuff that's either deprecated, obsolete or not used
at all:
* Update the minimal autoconf version to 2.69
* AC_PROG_CC_C99 is deprecated, just use AC_PROG_CC as we require C11
anyway
* AC_HEADER_TIME is deprecated, both <sys/time.h> and <time.h> can be
included at the same time, and we don't use the macros that
AC_HEADER_TIME defines anywhere
* AC_HEADER_STDC checks for ISO C90 and we require at least C11
* Replace AC_TRY_*([]) with AC_*_IFELSE([AC_LANG_PROGRAM()])
* Update m4/ax_check_openssl.m4 from serial 10 to serial 11
* Update m4/ax_gcc_func_attribute.m4 from serial 10 to serial 13
* Update m4/ax_pthread.m4 from serial 24 to serial 30
* Add early AC_CANONICAL_TARGET call to prevent warning from AX_PTHREAD
This commit changes the taskmgr to run the individual tasks on the
netmgr internal workers. While an effort has been put into keeping the
taskmgr interface intact, couple of changes have been made:
* The taskmgr has no concept of universal privileged mode - rather the
tasks are either privileged or unprivileged (normal). The privileged
tasks are run as a first thing when the netmgr is unpaused. There
are now four different queues in in the netmgr:
1. priority queue - netievent on the priority queue are run even when
the taskmgr enter exclusive mode and netmgr is paused. This is
needed to properly start listening on the interfaces, free
resources and resume.
2. privileged task queue - only privileged tasks are queued here and
this is the first queue that gets processed when network manager
is unpaused using isc_nm_resume(). All netmgr workers need to
clean the privileged task queue before they all proceed normal
operation. Both task queues are processed when the workers are
finished.
3. task queue - only (traditional) task are scheduled here and this
queue along with privileged task queues are process when the
netmgr workers are finishing. This is needed to process the task
shutdown events.
4. normal queue - this is the queue with netmgr events, e.g. reading,
sending, callbacks and pretty much everything is processed here.
* The isc_taskmgr_create() now requires initialized netmgr (isc_nm_t)
object.
* The isc_nm_destroy() function now waits for indefinite time, but it
will print out the active objects when in tracing mode
(-DNETMGR_TRACE=1 and -DNETMGR_TRACE_VERBOSE=1), the netmgr has been
made a little bit more asynchronous and it might take longer time to
shutdown all the active networking connections.
* Previously, the isc_nm_stoplistening() was a synchronous operation.
This has been changed and the isc_nm_stoplistening() just schedules
the child sockets to stop listening and exits. This was needed to
prevent a deadlock as the the (traditional) tasks are now executed on
the netmgr threads.
* The socket selection logic in isc__nm_udp_send() was flawed, but
fortunatelly, it was broken, so we never hit the problem where we
created uvreq_t on a socket from nmhandle_t, but then a different
socket could be picked up and then we were trying to run the send
callback on a socket that had different threadid than currently
running.
When we are reading from the xfrin socket, and the transfer would be
shutdown, the shutdown function would call `xfrin_fail()` which in turns
calls `xfrin_cancelio()` that causes the read callback to be invoked
with `ISC_R_CANCELED` status code and that caused yet another
`xfrin_fail()` call.
The fix here is to ensure the `xfrin_fail()` would be run only once
properly using better synchronization on xfr->shuttingdown flag.
Fix lock-order-inversion (potential deadlock) in dns_resolver_createfetch
There's a lock-order-inversion when running `zone_maintenance()` from
the timer while shutting down the server `shutdown_server()`. This only
happens when the taskmgr scheduling is more relaxed and paralellized,
but the issue is real nevertheless.
The associated ThreadSanitizer warning:
WARNING: ThreadSanitizer: lock-order-inversion (potential deadlock)
Cycle in lock order graph: M1 (0x000000000001) => M2 (0x000000000000) => M1
Since all the libraries are internal now, just cleanup the ISCAPI remnants
in isc_socket, isc_task and isc_timer APIs. This means, there's one less
layer as following changes have been done:
* struct isc_socket and struct isc_socketmgr have been removed
* struct isc__socket and struct isc__socketmgr have been renamed
to struct isc_socket and struct isc_socketmgr
* struct isc_task and struct isc_taskmgr have been removed
* struct isc__task and struct isc__taskmgr have been renamed
to struct isc_task and struct isc_taskmgr
* struct isc_timer and struct isc_timermgr have been removed
* struct isc__timer and struct isc__timermgr have been renamed
to struct isc_timer and struct isc_timermgr
* All the associated code that dealt with typing isc_<foo>
to isc__<foo> and back has been removed.
Fixup win32 paths for moved bin/tests/system/resolve
When resolve.c was moved from lib/samples to bin/tests/system, the
resolve.vcxproj.in would still contain old paths to the directory
root. This commit adds one more ..\ to match the directory depth.
Additionally, fixup the path in BINDInstall.vcxproj.in to be
bin/tests/system and not bin/tests/samples.
When setnsec3param() is schedule from zone_postload() there's no
guarantee that `zone->db` is not `NULL` yet. Thus when the
setnsec3param() is called, we need to check for `zone->db` existence and
reschedule the task, because calling `rss_post()` on a zone with empty
`.db` ends up with no-op (the function just returns).
Previously, the taskmgr, timermgr and socketmgr had a constructor
variant, that would create the mgr on top of existing appctx. This was
no longer true and isc_<*>mgr was just calling isc_<*>mgr_create()
directly without any extra code.
Evan Hunt [Tue, 23 Mar 2021 01:40:21 +0000 (18:40 -0700)]
move samples/resolve.c to bin/tests/system
"resolve" is used by the resolver system tests, and I'm not
certain whether delv exercises the same code, so rather than
remove it, I moved it to bin/tests/system.
Evan Hunt [Tue, 23 Mar 2021 01:25:15 +0000 (18:25 -0700)]
remove sample-async
sample code for export libraries is no longer needed and
this code is not used for any internal tests. also, sample-gai.c
had already been removed but there were some dangling references.
Evan Hunt [Tue, 23 Mar 2021 01:04:23 +0000 (18:04 -0700)]
remove dns_client_update() and related code
the libdns client API is no longer being maintained for
external use, we can remove the code that isn't being used
internally, as well as the related tests.
Refactor dns_journal_rollforward() to work over opened journal
Too much logic was cramped inside the dns_journal_rollforward() that
made it harder to follow. The dns_journal_rollforward() was refactored
to work over already opened journal and some of the previous logic was
moved to new static zone_journal_rollforward() that separates the
journal "rollforward" logic from the "zone" logic.
Mark Andrews [Sun, 11 Apr 2021 23:36:18 +0000 (09:36 +1000)]
Fixing a recoverable journal should not result in the zone being written
when dns_journal_rollforward returned ISC_R_RECOVERABLE the distintion
between 'up to date' and 'success' was lost, as a consequence
zone_needdump() was called writing out the zone file when it shouldn't
have been. This change restores that distintion. Adjust system
test to reflect visible changes.
TLS: try to close TCP socket descriptor earlier when possible
Before this fix underlying TCP sockets could remain opened for longer
than it is actually required, causing unit tests to fail with lots of
ISC_R_TOOMANYOPENFILES errors.
The change also enables graceful SSL shutdown (before that it would
happen only in the case when isc_nm_cancelread() were called).
Merge the tls_test.c into netmgr_test.c and extend the tests suite
This commit merges TLS tests into the common Network Manager unit
tests suite and extends the unit test framework to include support for
additional "ping-pong" style tests where all data could be sent via
lesser number of connections (the behaviour of the old test
suite). The tests for TCP and TLS were extended to make use of the new
mode, as this mode better translates to how the code is used in DoH.
Both TLS and TCP tests now share most of the unit tests' code, as they
are expected to function similarly from a users's perspective anyway.
Additionally to the above, the TLS test suite was extended to include
TLS tests using the connections quota facility.
Due to the lack of "match-clients" clauses in ns4/named2.conf.in, the
same view is incorrectly chosen for all queries received by ns4 in the
"keymgr2kasp" system test. This causes only one version of the
"view-rsasha256.kasp" zone to actually be checked. Add "match-clients"
clauses to ns4/named2.conf.in to ensure the test really checks what it
claims to.
Use identical view names ("ext", "int") in ns4/named.conf.in and
ns4/named2.conf.in so that it is easier to quickly identify the
differences between these two files.
Update tests.sh to account for the above changes. Also fix a copy-paste
error in a comment to prevent confusion.
Matthijs Mekking [Fri, 19 Mar 2021 14:23:01 +0000 (15:23 +0100)]
Fix inline test with missing $INCLUDE
The test case for a zone with a missing include file was wrong for two
reasons:
1. It was loading the wrong file (master5 instead of master6)
2. It did actually not set the $ret variable to 1 if the test failed
(it should default to ret=1 and clear the variable if the
appropriate log is found).
Matthijs Mekking [Fri, 19 Mar 2021 14:21:17 +0000 (15:21 +0100)]
Add inline-signing with $INCLUDE test
Add a test case for inline-signing for a zone with an $INCLUDE
statement. There is already a test for a missing include file, this
one adds a test for a zone with an include file that does exist.
Test if the record in the included file is loaded.
Matthijs Mekking [Fri, 18 Dec 2020 13:19:36 +0000 (14:19 +0100)]
Implement draft-vandijk-dnsop-nsec-ttl
The draft says that the NSEC(3) TTL must have the same TTL value
as the minimum of the SOA MINIMUM field and the SOA TTL. This was
always the intended behaviour.
Update the zone structure to also track the SOA TTL. Whenever we
use the MINIMUM value to determine the NSEC(3) TTL, use the minimum
of MINIMUM and SOA TTL instead.
There is no specific test for this, however two tests need adjusting
because otherwise they failed: They were testing for NSEC3 records
including the TTL. Update these checks to use 600 (the SOA TTL),
rather than 3600 (the SOA MINIMUM).
Matthijs Mekking [Fri, 12 Mar 2021 15:27:45 +0000 (16:27 +0100)]
Use stale TTL as RRset TTL in dumpdb
It is more intuitive to have the countdown 'max-stale-ttl' as the
RRset TTL, instead of 0 TTL. This information was already available
in a comment "; stale (will be retained for x more seconds", but
Support suggested to put it in the TTL field instead.
Matthijs Mekking [Fri, 12 Mar 2021 14:12:27 +0000 (15:12 +0100)]
Check staleness in bind_rdataset
Before binding an RRset, check the time and see if this record is
stale (or perhaps even ancient). Marking a header stale or ancient
happens only when looking up an RRset in cache, but binding an RRset
can also happen on other occasions (for example when dumping the
database).
Check the time and compare it to the header. If according to the
time the entry is stale, but not ancient, set the STALE attribute.
If according to the time is ancient, set the ANCIENT attribute.
We could mark the header stale or ancient here, but that requires
locking, so that's why we only compare the current time against
the rdh_ttl.
Adjust the test to check the dump-db before querying for data. In the
dumped file the entry should be marked as stale, despite no cache
lookup happened since the initial query.
Matthijs Mekking [Wed, 10 Mar 2021 11:09:16 +0000 (12:09 +0100)]
Fix nonsensical stale TTL values in cache dump
When introducing change 5149, "rndc dumpdb" started to print a line
above a stale RRset, indicating how long the data will be retained.
At that time, I thought it should also be possible to load
a cache from file. But if a TTL has a value of 0 (because it is stale),
stale entries wouldn't be loaded from file. So, I added the
'max-stale-ttl' to TTL values, and adjusted the $DATE accordingly.
Since we actually don't have a "load cache from file" feature, this
is premature and is causing confusion at operators. This commit
changes the 'max-stale-ttl' adjustments.
A check in the serve-stale system test is added for a non-stale
RRset (longttl.example) to make sure the TTL in cache is sensible.
Also, the comment above stale RRsets could have nonsensical
values. A possible reason why this may happen is when the RRset was
marked a stale but the 'max-stale-ttl' has passed (and is actually an
RRset awaiting cleanup). This would lead to the "will be retained"
value to be negative (but since it is stored in an uint32_t, you would
get a nonsensical value (e.g. 4294362497).
To mitigate against this, we now also check if the header is not
ancient. In addition we check if the stale_ttl would be negative, and
if so we set it to 0. Most likely this will not happen because the
header would already have been marked ancient, but there is a possible
race condition where the 'rdh_ttl + serve_stale_ttl' has passed,
but the header has not been checked for staleness.
projects / thirdparty / bind9.git / log
