page_pool_put_full_page() should only be invoked when freeing Rx buffers
or building a skb if the size is too short. At other times, the pages
need to be reused. So remove the redundant page put. In the original
code, double free pages cause kernel panic:
Jakub Kicinski [Tue, 15 Jul 2025 23:50:06 +0000 (16:50 -0700)]
Merge branch 'net-hns3-use-seq_file-for-debugfs'
Jijie Shao says:
====================
net: hns3: use seq_file for debugfs
Arnd reported that there are two build warning for on-stasck
buffer oversize. As Arnd's suggestion, using seq file way
to avoid the stack buffer or kmalloc buffer allocating.
Yonglong Liu [Mon, 14 Jul 2025 06:10:36 +0000 (14:10 +0800)]
net: hns3: use seq_file for files in common/ of hclge layer
This patch use seq_file for the following nodes:
mng_tbl/loopback/interrupt_info/reset_info/imp_info/ncl_config/
mac_tnl_status/service_task_info/vlan_config/ptp_info
This patch is the last modification to debugfs file
of hclge layer. Unused functions and variables
are removed together.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-10-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: hns3: use seq_file for files in tm/ in debugfs
Use seq_file for files in debugfs. This is the first
modification for reading in hclge_debugfs.c.
This patch use seq_file for the following nodes:
tm_nodes/tm_priority/tm_qset/tm_map/tm_pg/tm_port/tc_sch_info/
qos_pause_cfg/qos_pri_map/qos_dscp_map/qos_buf_cfg
net: hns3: clean up the build warning in debugfs by use seq file
Arnd reported that there are two build warning for on-stasck
buffer oversize. As Arnd's suggestion, using seq file way
to avoid the stack buffer or kmalloc buffer allocating.
Al Viro [Sun, 13 Jul 2025 18:01:34 +0000 (19:01 +0100)]
don't open-code kernel_accept() in rds_tcp_accept_one()
rds_tcp_accept_one() starts with a pretty much verbatim
copy of kernel_accept(). Might as well use the real thing...
That code went into mainline in 2009, kernel_accept()
had been added in Aug 2006, the copyright on rds/tcp_listen.c
is "Copyright (c) 2006 Oracle", so it's entirely possible
that it predates the introduction of kernel_accept().
Jakub Kicinski [Tue, 15 Jul 2025 23:05:41 +0000 (16:05 -0700)]
Merge tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-07-15
Brett Werling's patch for the tcan4x5x glue code driver fixes the
detection of chips which are held in reset/sleep and must be woken up
by GPIO prior to communication.
* tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: tcan4x5x: fix reset gpio usage during probe
====================
Oliver Neukum [Mon, 14 Jul 2025 11:12:56 +0000 (13:12 +0200)]
usb: net: sierra: check for no status endpoint
The driver checks for having three endpoints and
having bulk in and out endpoints, but not that
the third endpoint is interrupt input.
Rectify the omission.
- Require mutable reference for as_slice_mut() and write().
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone).
* tag 'alloc-next-v6.17-2025-07-15' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: add mm folks as reviewers to rust alloc
rust: dma: require mutable reference for as_slice_mut() and write()
rust: dma: add dma_handle_with_offset method to CoherentAllocation
rust: dma: expose the count and size of CoherentAllocation
rust: dma: fix doc-comment of dma_handle()
rust: dma: add as_slice/write functions for CoherentAllocation
rust: dma: convert the read/write macros to return Result
rust: dma: clarify wording and be consistent in `coherent` nomenclature
rust: alloc: implement `Borrow` and `BorrowMut` for `KBox`
rust: alloc: implement `Borrow` and `BorrowMut` for `Vec`
rust: vec: impl Default for Vec with any allocator
Mark Brown [Tue, 15 Jul 2025 21:40:13 +0000 (22:40 +0100)]
SDCA Bug Fixes
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Some small SDCA bug fixes reported from various sources. An array bounds
check, an uninitialised variable and some memory allocations that should
zero initialise.
Charles Keepax (3):
ASoC: SDCA: Fix off by one error in IRQ bound check
ASoC: SDCA: Avoid use of uninitialised local name variable
ASoC: SDCA: Update memory allocations to zero initialise
Yonghong Song [Tue, 15 Jul 2025 18:59:10 +0000 (11:59 -0700)]
selftests/bpf: Fix build error due to certain uninitialized variables
With the latest llvm21 compiler, I hit several errors when building bpf
selftests. Some of errors look like below:
test_maps.c:565:40: error: variable 'val' is uninitialized when passed as a
const pointer argument here [-Werror,-Wuninitialized-const-pointer]
565 | assert(bpf_map_update_elem(fd, NULL, &val, 0) < 0 &&
| ^~~
prog_tests/bpf_iter.c:400:25: error: variable 'c' is uninitialized when passed
as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
400 | write(finish_pipe[1], &c, 1);
| ^
Some other errors have similar the pattern as the above.
These errors are fixed by initializing those variables properly.
spi: dt-bindings: spi-mux: Drop "spi-max-frequency" as required
There's little reason to require the SPI mux to define a maximum bus
frequency as the muxing is just the chip select and devices still define
their maximum freq. In fact, several users don't set "spi-max-frequency"
which caused warnings.
KVM: VMX: Ensure unused kvm_tdx_capabilities fields are zeroed out
Zero-allocate the kernel's kvm_tdx_capabilities structure and copy only
the number of CPUID entries from the userspace structure. As is, KVM
doesn't ensure kernel_tdvmcallinfo_1_{r11,r12} and user_tdvmcallinfo_1_r12
are zeroed, i.e. KVM will reflect whatever happens to be in the userspace
structure back at userspace, and thus may report garbage to userspace.
Zeroing the entire kernel structure also provides better semantics for the
reserved field. E.g. if KVM extends kvm_tdx_capabilities to enumerate new
information by repurposing bytes from the reserved field, userspace would
be required to zero the new field in order to get useful information back
(because older KVMs without support for the repurposed field would report
garbage, a la the aforementioned tdvmcallinfo bugs).
Fixes: 61bb28279623 ("KVM: TDX: Get system-wide info about TDX module on initialization") Suggested-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Reported-by: Xiaoyao Li <xiaoyao.li@intel.com> Closes: https://lore.kernel.org/all/3ef581f1-1ff1-4b99-b216-b316f6415318@intel.com Tested-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Link: https://lore.kernel.org/r/20250714221928.1788095-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
Alice Ryhl [Fri, 11 Jul 2025 07:59:40 +0000 (07:59 +0000)]
workqueue: rust: add delayed work items
This patch is being sent for use in the various Rust GPU drivers that
are under development. It provides the additional feature of work items
that are executed after a delay.
The design of the existing workqueue is rather extensible, as most of
the logic is reused for delayed work items even though a different work
item type is required. The new logic consists of:
* A new DelayedWork struct that wraps struct delayed_work.
* A new impl_has_delayed_work! macro that provides adjusted versions of
the container_of logic, that is suitable with delayed work items.
* A `enqueue_delayed` method that can enqueue a delayed work item.
This patch does *not* rely on the fact that `struct delayed_work`
contains `struct work_struct` at offset zero. It will continue to work
even if the layout is changed to hold the `work` field at a different
offset.
Please see the example introduced at the top of the file for example
usage of delayed work items.
Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20250711-workqueue-delay-v3-1-3fe17b18b9d1@google.com
[ Replaced `as _` with `as ffi::c_int` to clean warning. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Mark Brown [Tue, 15 Jul 2025 20:44:05 +0000 (21:44 +0100)]
ASoC: convert from clk round_rate() to
Merge series from Brian Masney <bmasney@redhat.com>:
The round_rate() clk ops is deprecated in the clk framework in favor
of the determine_rate() clk ops, so let's go ahead and convert the
drivers in the rtc subsystem using the Coccinelle semantic patch
posted below. I did a few minor cosmetic cleanups of the code in a
few cases.
Coccinelle semantic patch:
virtual patch
// Look up the current name of the round_rate function
@ has_round_rate @
identifier round_rate_name =~ ".*_round_rate";
identifier hw_param, rate_param, parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
...
}
// Rename the route_rate function name to determine_rate()
@ script:python generate_name depends on has_round_rate @
round_rate_name << has_round_rate.round_rate_name;
new_name;
@@
// Coccinelle only transforms the first occurrence of the rate parameter
// Run a second time. FIXME: Is there a better way to do this?
@ chg_rate2 depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
- rate_param
+ req->rate
...>
}
// Change parent_rate to req->best_parent_rate
@ chg_parent_rate depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
(
- *parent_rate_param
+ req->best_parent_rate
|
- parent_rate_param
+ &req->best_parent_rate
)
...>
}
// Convert the function definition from round_rate() to determine_rate()
@ func_definition depends on chg_rate @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
identifier generate_name.new_name;
@@
- long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
- unsigned long *parent_rate_param)
+ int new_name(struct clk_hw *hw, struct clk_rate_request *req)
{
...
}
// Update the ops from round_rate() to determine_rate()
@ ops depends on func_definition @
identifier has_round_rate.round_rate_name;
identifier generate_name.new_name;
@@
Note that I used coccinelle 1.2 instead of 1.3 since the newer version
adds unnecessary braces as described in this post.
https://lore.kernel.org/cocci/67642477-5f3e-4b2a-914d-579a54f48cbd@intel.com/
Alice Ryhl [Tue, 24 Jun 2025 15:27:56 +0000 (15:27 +0000)]
rust: types: rename Opaque::raw_get to cast_into
In the previous patch we added Opaque::cast_from() that performs the
opposite operation to Opaque::raw_get(). For consistency with this
naming, rename raw_get() to cast_from().
There are a few other options such as calling cast_from() something
closer to raw_get() rather than renaming this method. However, I could
not find a great naming scheme that works with raw_get(). The previous
version of this patch used from_raw(), but functions of that name
typically have a different signature, so that's not a great option.
Robin Murphy [Fri, 25 Apr 2025 13:39:29 +0000 (14:39 +0100)]
PCI: Fix driver_managed_dma check
Since it's not currently safe to take device_lock() in the IOMMU probe
path, that can race against really_probe() setting dev->driver before
attempting to bind. The race itself isn't so bad, since we're only
concerned with dereferencing dev->driver itself anyway, but sadly my
attempt to implement the check with minimal churn leads to a kind of
Time-of-Check to Time-of-Use (TOCTOU) issue, where dev->driver becomes
valid after to_pci_driver(NULL) is already computed, and thus the check
fails to work as intended.
Will and I both hit this with the platform bus, but the pattern here is
the same, so fix it for correctness too.
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reported-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Will McVicker <willmcvicker@google.com> Link: https://patch.msgid.link/20250425133929.646493-4-robin.murphy@arm.com
vfio/mlx5: fix possible overflow in tracking max message size
MLX cap pg_track_log_max_msg_size consists of 5 bits, value of which is
used as power of 2 for max_msg_size. This can lead to multiplication
overflow between max_msg_size (u32) and integer constant, and afterwards
incorrect value is being written to rq_size.
Fix this issue by extending integer constant to u64 type.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru> Reviewed-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20250701144017.2410-2-a.sadovnikov@ispras.ru Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The macros table has three columns: the second one is "an" and the
third one writes "an ioctl with ... parameters". Simplify the table
by adding heading row that indicates macro name and accepted
parameters.
Documentation: ioctl-number: Correct full path to papr-physical-attestation.h
Commit 03c9d1a5a30d93 ("Documentation: Fix description format for
powerpc RTAS ioctls") fixes Sphinx warning by chopping arch/ path
component of papr-physical-attestation.h to fit existing "Include File"
column. Now that the column has been widened just enough for that
header file, add back its arch/ path component.
Dave Ertman [Thu, 22 May 2025 17:16:57 +0000 (13:16 -0400)]
ice: add NULL check in eswitch lag check
The function ice_lag_is_switchdev_running() is being called from outside of
the LAG event handler code. This results in the lag->upper_netdev being
NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a
check before it is dereferenced.
Fixes: 776fe19953b0 ("ice: block default rule setting on LAG interface") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Arnd Bergmann [Fri, 20 Jun 2025 17:31:24 +0000 (19:31 +0200)]
ethernet: intel: fix building with large NR_CPUS
With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to
compile like:
In function ‘i40e_free_q_vector’,
inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3:
571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’
1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \
drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’
5113 | kfree_rcu(q_vector, rcu);
| ^~~~~~~~~
The problem is that the 'rcu' member in 'q_vector' is too far from the start
of the structure. Move this member before the CPU mask instead, in all three
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jonathan Corbet [Tue, 15 Jul 2025 19:46:42 +0000 (13:46 -0600)]
Merge branch 'kdoc-item2' into docs-mw
The kerneldoc parsing phase gathers all of the information about the
declarations of interest, then passes it through to the output phase as a
dict that is an unstructured blob of information; this organization has its
origins in the Perl version of the program. It results in an interface
that is difficult to reason about, dozen-parameter function calls, and
other ills.
Introduce a new class (KdocItem) to carry this information between the
parser and the output modules, and, step by step, modify the system to use
this class in a more structured way. This could be taken further by
creating a subclass of KdocItem for each declaration type (function,
struct, ...), but that is probably more structure than we need.
The result is (I hope) clearer code, the removal of a bunch of boilerplate,
and no changes to the generated output.
Jonathan Corbet [Thu, 10 Jul 2025 23:24:07 +0000 (17:24 -0600)]
docs: kdoc: emit a warning for ancient versions of Python
Versions of Python prior to 3.7 do not guarantee to remember the insertion
order of dicts; since kernel-doc depends on that guarantee, running with
such older versions could result in output with reordered sections.
Python 3.9 is the minimum for the kernel as a whole, so this should not be
a problem, but put in a warning just in case somebody tries to use
something older.
Jonathan Corbet [Wed, 2 Jul 2025 20:53:32 +0000 (14:53 -0600)]
docs: kdoc: clean up check_sections()
entry.sectcheck is just a duplicate of our list of sections that is only
passed to check_sections(); its main purpose seems to be to avoid checking
the special named sections. Rework check_sections() to not use that field
(which is then deleted), tocheck for the known sections directly, and
tighten up the logic in general.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jonathan Corbet [Wed, 2 Jul 2025 19:17:59 +0000 (13:17 -0600)]
docs: kdoc: Regularize the use of the declaration name
Each declaration type passes through the name in a unique field of the
"args" blob - even though we have always just passed the name separately.
Get rid of all the weird names and just use the common version.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jonathan Corbet [Wed, 2 Jul 2025 19:05:56 +0000 (13:05 -0600)]
docs: kdoc: Coalesce parameter-list handling
Callers to output_declaration() always pass the parameter information from
self.entry; remove all of the boilerplate arguments and just get at that
information directly. Formalize its placement in the KdocItem class.
It would be nice to get rid of parameterlist as well, but that has the
effect of reordering the output of function parameters and struct fields to
match the order in the kerneldoc comment rather than in the declaration.
One could argue about which is more correct, but the ordering has been left
unchanged for now.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jonathan Corbet [Wed, 2 Jul 2025 17:12:27 +0000 (11:12 -0600)]
docs: kdoc: use self.entry.parameterlist directly in check_sections()
Callers of check_sections() join parameterlist into a single string, which
is then immediately split back into the original list. Rather than do all
that, just use parameterlist directly in check_sections().
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jonathan Corbet [Wed, 2 Jul 2025 17:04:43 +0000 (11:04 -0600)]
docs: kdoc: remove the "struct_actual" machinery
The code goes out of its way to create a special list of parameters in
entry.struct_actual that is just like entry.parameterlist, but with extra
junk. The only use of that information, in check_sections(), promptly
strips all the extra junk back out. Drop all that extra work and just use
parameterlist.
No output changes.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jonathan Corbet [Tue, 1 Jul 2025 22:47:59 +0000 (16:47 -0600)]
docs: kdoc: Centralize handling of the item section list
The section list always comes directly from the under-construction entry
and is used uniformly. Formalize section handling in the KdocItem class,
and have output_declaration() load the sections directly from the entry,
eliminating a lot of duplicated, verbose parameters.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jonathan Corbet [Tue, 1 Jul 2025 22:21:24 +0000 (16:21 -0600)]
docs: kdoc: drop "sectionlist"
Python dicts (as of 3.7) are guaranteed to remember the insertion order of
items, so we do not need a separate list for that purpose. Drop the
per-entry sectionlist variable and just rely on native dict ordering.
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Jonathan Corbet [Tue, 15 Jul 2025 19:20:32 +0000 (13:20 -0600)]
Merge tag 'chinese-doc-6.16-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/alexs/linux into docs-mw
Chinese translation docs for 6.16-rc1 from Alex Shi
This is the Chinese translation subtree for 6.16-rc1. It
includes few changes:
- Updates to the process documentation
- Added translations for network and speculation docs
- Polished zh_CN/how-to.rst
The above patches have been tested by 'make htmldocs'
Alice Ryhl [Tue, 24 Jun 2025 15:27:55 +0000 (15:27 +0000)]
rust: types: add Opaque::cast_from
Since commit b20fbbc08a36 ("rust: check type of `$ptr` in
`container_of!`") we have enforced that the field pointer passed to
container_of! must match the declared field. This caused mismatches when
using a pointer to bindings::x for fields of type Opaque<bindings::x>.
This situation encourages the user to simply pass field.cast() to the
container_of! macro, but this is not great because you might
accidentally pass a *mut bindings::y when the field type is
Opaque<bindings::x>, which would be wrong.
To help catch this kind of mistake, add a new Opaque::cast_from that
wraps a raw pointer in Opaque without changing the inner type. Also
update the docs to reflect this as well as some existing users.
Signed-off-by: Alice Ryhl <aliceryhl@google.com> Acked-by: Andreas Hindborg <a.hindborg@kernel.org> Acked-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Danilo Krummrich <dakr@kernel.org> Acked-by: Danilo Krummrich <dakr@kernel.org> Link: https://lore.kernel.org/r/20250624-opaque-from-raw-v2-1-e4da40bdc59c@google.com Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Charles Keepax [Mon, 7 Jul 2025 12:41:55 +0000 (13:41 +0100)]
ASoC: SDCA: Add hw_params() helper function
Add a helper function that can be called from hw_params() in the DAI ops
to configure the SDCA Cluster, Clock and Usage controls. These setup the
channels, sample rate, and bit depths that will be used by the Terminal.
Charles Keepax [Mon, 7 Jul 2025 12:41:54 +0000 (13:41 +0100)]
ASoC: SDCA: Add a helper to get the SoundWire port number
Add a helper function to extract the SoundWire hardware port number
from the SDCA DataPort Selector Control. Typically this would be
called from hw_params() and used to call sdw_stream_add_slave().
Charles Keepax [Mon, 7 Jul 2025 12:41:53 +0000 (13:41 +0100)]
ASoC: SDCA: Add helper to add DAI constraints
Currently the core SDCA code simply creates a place holder available
channels from 1 to SDCA_MAX_CHANNEL_COUNT. Add a helper function
that will constrain the number of channels based on the actual
available SDCA Clusters in DisCo. Currently this code only handles
Input Terminal Entities as they directly specify the Cluster. More
work will be required later for Output Terminals which inherit their
Cluster. Typically this new helper would be called from the DAIs
startup callback.
Charles Keepax [Mon, 7 Jul 2025 12:41:52 +0000 (13:41 +0100)]
ASoC: soc-dai: Add private data to snd_soc_dai
Add a private data pointer that can be used to store context along
with the DAI. This will be useful to allow the SDCA class library to
store data separately from the CODEC driver itself.
Charles Keepax [Mon, 7 Jul 2025 12:41:51 +0000 (13:41 +0100)]
ASoC: SDCA: Move SDCA search functions and export
The ASoC code for SDCA contains several helper functions that search for
controls/ranges/etc. As the code evolves these helpers are likely to be
useful to anything interacting with the stored DisCo data. Move the
helpers into sdca_function.c and export them so other modules can also
use them.
Charles Keepax [Mon, 7 Jul 2025 12:41:49 +0000 (13:41 +0100)]
ASoC: SDCA: Allow read-only controls to be deferrable
The current SDCA Control parsing only checks the deferrable flag for
Read/Write and Dual Ranked controls. However, reads can defer as well as
writes so Read Only controls should also check for the deferrable flag.
Add the handling for this into find_sdca_entity_control().
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20250707124155.2596744-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
PCI: qcom: Add support for parsing the new Root Port binding
The DT binding has moved the PHY, PERST# properties to Root Port node from
the Host Bridge node. So add support for parsing the new binding. The new
binding uses 'reset-gpios' property for PERST#, hence parse the same
property in the driver instead of the legacy 'perst-gpios'.
To maintain DT backwards compatibility, fallback to the legacy method of
parsing the host bridge node if the properties are not present in the Root
Port node.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: refactored the root port parsing code, fixed a bug & commit message rewording] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250702-perst-v5-2-920b3d1f6ee1@qti.qualcomm.com
dt-bindings: PCI: qcom: Move PHY & reset GPIO to Root Port node
Move the phys, phy-names, reset-gpios properties to the PCIe Root Port node
from Host Bridge node, as agreed upon here [1].
Update the qcom,pcie-common.yaml to include the 'phys' property in the Root
Port node. 'phy-names' property is not needed in Root Port since each Root
Port supports only one PHY. Also, there is already 'reset-gpios' property
defined for PERST# in pci-bus-common.yaml, so use that property instead of
'perst-gpios'.
For backward compatibility, do not remove any existing properties in the
bridge node, but mark them as 'deprecated' instead.
Mayank Rana [Mon, 16 Jun 2025 22:42:59 +0000 (15:42 -0700)]
PCI: qcom: Add support for Qualcomm SA8255p based PCIe Root Complex
Add functionality to enable resource management (like clocks, regulators,
PHY) through firmware and enumerate ECAM compliant Root Complex on SA8255p
SoC, where the PCIe Root Complex is firmware managed and configured into
ECAM compliant mode.
Signed-off-by: Mayank Rana <mayank.rana@oss.qualcomm.com>
[mani: minor code cleanups and commit message rewording] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add "ECAM" in comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/20250616224259.3549811-5-mayank.rana@oss.qualcomm.com
Both io_poll_wq_wake() and io_cqring_wake() contain the exact same code,
and most of the comment in the latter applies equally to both.
Move the test and wakeup handling into a basic helper that they can both
use, and move part of the comment that applies generically to this new
helper.
Document the required configuration to enable the PCIe Root Complex on
SA8255p, which is managed by firmware using power-domain based handling
and configured as ECAM compliant.
arm64: dts: rockchip: Drop unneeded address+size-cells on px30
On nodes with compatible "rockchip,px30-usb2phy-grf", the #address-cells
and #size-cells are required and consequently their child nodes should
have unit addresses. That is not the case for the px30-pmugrf and
px30-grf nodes, so remove them there.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
arm64: dts: rockchip: Simplify mipi_out endpoint on rk3399 RP64 dtso
The only thing actually added here is a single endpoint on mipi_out,
which is already defined in rk3399-base.dtsi, so it's simpler to just
reference that phandle, which allows the removal of several properties.
arm64: dts: rockchip: Simplify edp endpoints on several rk3399 boards
The only thing actually added here is a single endpoint on edp_out,
which is already defined in rk3399-base.dtsi, so it's simpler to just
reference that phandle, which allows the removal of several properties.
This fixes the following DTB validation warnings:
graph node has single child node 'endpoint@0',
#address-cells/#size-cells are not necessary
ublk: remove unused req argument from ublk_sub_req_ref()
Since commit b749965edda8 ("ublk: remove ublk_commit_and_fetch()"),
ublk_sub_req_ref() no longer uses its struct request *req argument.
So drop the argument from ublk_sub_req_ref(), and from
ublk_need_complete_req(), which only passes it to ublk_sub_req_ref().
drm/radeon: Do not hold console lock during resume
The function radeon_resume_kms() acquires the console lock. It is
inconsistent, as it depends on the notify_client argument. That
lock then covers a number of suspend operations that are unrelated
to the console.
Remove the calls to console_lock() and console_unlock() from the
radeon function. The console lock is only required by DRM's fbdev
emulation, which acquires it as necessary.
Also fixes a possible circular dependency between the console lock
and the client-list mutex, where the mutex is supposed to be taken
first.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Do not hold console lock while suspending clients
The radeon driver holds the console lock while suspending in-kernel
DRM clients. This creates a circular dependency with the client-list
mutex, which is supposed to be acquired first. Reported when combining
radeon with another DRM driver.
Therefore, do not take the console lock in radeon, but let the fbdev
DRM client acquire the lock when needed. This is what all other DRM
drivers so.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Closes: https://lore.kernel.org/dri-devel/0a087cfd-bd4c-48f1-aa2f-4a3b12593935@oss.qualcomm.com/ Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Disable CRTC degamma LUT for DCN401
In DCN401 pre-blending degamma LUT isn't affecting cursor as in previous
DCN version. As this is not the behavior close to what is expected for
CRTC degamma LUT, disable CRTC degamma LUT property in this HW.
When enabling HDR on KDE, it takes the first CRTC 1D LUT available and
apply a color transformation (Gamma 2.2 -> PQ). AMD driver usually
advertises a CRTC degamma LUT as the first CRTC 1D LUT, but it's
actually applied pre-blending. In previous HW version, it seems to work
fine because the 1D LUT was applied to cursor too, but DCN401 presents a
different behavior and the 1D LUT isn't affecting the hardware cursor.
To address the wrong gamma on cursor with HDR (see the link), I came up
with this patch that disables CRTC degamma LUT in this hw, since it
presents a different behavior than others. With this KDE sees CRTC
regamma LUT as the first post-blending 1D LUT available. This is
actually more consistent with AMD color pipeline. It was tested by the
reporter, since I don't have the HW available for local testing and
debugging.
Melissa
---
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SmartMux is a mechanism to switch the GPU being used for scanout in a
hybrid configuration. This is used for devices with an eDP and two GPUs.
This is only valid when the system has a physical switch (Multiplexer)
in the board to switch between the two GPUs.
When a graphically intensive workload like a game is being run, the
system can be switch the active display to the dGPU, so that we can
avoid copying the buffer from dGPU to APU for scanout. This helps with
latency and FPS. When power consumption is preferred, the system can be
switched to the APU.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clayton King [Thu, 19 Jun 2025 17:54:26 +0000 (13:54 -0400)]
drm/amd/display: Free memory allocation
[WHY]
Free memory to avoid memory leak
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Clayton King <clayton.king@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ovidiu Bunea [Thu, 27 Mar 2025 20:36:17 +0000 (16:36 -0400)]
drm/amd/display: Add HPO encoder support to Replay
[why & how]
UHBR link rate capable eDPs will use HPO for encoding. Need to pass
HPO stream and link encoder instances to DMCUB for Replay FSM to
know which instances to use.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ovidiu Bunea [Thu, 13 Mar 2025 03:07:39 +0000 (23:07 -0400)]
drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)
[why & how]
DP1 eDP is still considered a single-eDP case and should support Panel Replay.
Modify secondary eDP policy to reflect this and update Replay state accordingly.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michael Strauss [Tue, 18 Feb 2025 14:23:44 +0000 (09:23 -0500)]
drm/amd/display: Fix FIXED_VS retimer clock gen source override
[WHY]
For SQ128 pattern some vendor-specific overrides are required.
Previously a hardcoded clock gen source value was incorrectly programmed,
causing our override to retimer's clock source override to be ignored.
Due to some PHY issues on certain APU programs, we see failures on retimer
bypass ports extend to electrical testing downstream of PHY due to some host
clock jitter which the retimer follows.
[HOW]
Fix typo to use correct clock gen source override of 0xC4 rather than 0x4C.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Mon, 16 Jun 2025 19:33:06 +0000 (15:33 -0400)]
drm/amd/display: New Behavior for debug option disable_ips_in_vpb
[Why & How]
To facilitate debugging, the following behaviors are defined for existing
debug option disable_ips_in_vpb
0 - Enable IPS in LVP - let driver decide (legacy)
1 - Disable IPS in LVP
2 - Enable IPS1 and RCG in LVP
3 - Enable IPS1 Z8, IPS1 and RCG in LVP
Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Thu, 15 May 2025 18:16:39 +0000 (14:16 -0400)]
drm/amd/display: Add static pg implementations for future use
[Why & How]
Add static pg implementations and debug flags for future use.
Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Duncan Ma [Fri, 2 May 2025 16:40:48 +0000 (12:40 -0400)]
drm/amd/display: Notify DMUB on HW Release
[Why & How]
DMUB shall be notified on driver hardware
release. Implement notification.
Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Duncan Ma <Duncan.Ma@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo Chen [Tue, 1 Apr 2025 04:14:01 +0000 (00:14 -0400)]
drm/amd/display: Adding missing driver code for IPSv2.0
[Why & How]
Aligned IPS FW state with DMCUB IPS FW state
Added debug option disable_ips_rcg to modify RCG behaviour in IPS modes.
Updated existing debug option disable_ips to align with new changes introduced by IPSv2.0
Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Duncan Ma [Mon, 31 Mar 2025 16:35:11 +0000 (12:35 -0400)]
drm/amd/display: Notify display idle on D3
[Why & How]
Display idle notification shall
be sent by driver on D3 entry. Implement
notification to DMUB and PMFW.
Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Duncan Ma <Duncan.Ma@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fudongwang [Tue, 24 Jun 2025 09:49:47 +0000 (17:49 +0800)]
drm/amd/display: Monitor patch to ignore EDID audio SAB check
[Why & How]
Some monitor have audio output but SAB data is zero. Skip
check this in this case.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Fudongwang <Fudong.Wang@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Fri, 20 Jun 2025 20:23:43 +0000 (16:23 -0400)]
drm/amd/display: Refactor DSC cap calculations
[WHY]
DSC block level should only be responsible for reporting single DSC
instance capabilities. Factoring in ODM combine requirements should be
handled in dc_dsc.c. Both components should acquire clocks from clk_mgr
to determine throughput capabilities instead of relying on hard coded
values as these can differ by SoC and SKU.
[HOW]
1) Add dsc_get_single_enc_caps to acquire single DSC instance
capabilities (replacing dsc_get_enc_caps), factoring in DSCCLK
2) add build_dsc_enc_caps to combine single DSC instance capabilities
3) account for max pixel rate per pipe (DISPCLK) when calculating
minimum slice count
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Workaround for stuck I2C arbitrage
[Why]
When booting without an HDMI display connected, the I2C registers
are not initialized correctly, leading to DC_I2C_ARBITRATION register
getting stuck with DC_I2C_REG_RW_CNTL_STATUS == USED_BY_SW.
[How]
* Correct TOCTOU race condition in engine acquire logic which did not
check against DMUB trying to acquire it at the same time.
* Deassert SOFT_RESET before acquire, as it can block access to other
I2C registers.
* Add a workaround in release, checking that after triggerring
DC_I2C_SW_DONE_USING_I2C_REG, DC_I2C_REG_RW_CNTL_STATUS != USED_BY_SW.
If necessary, trigger DC_I2C_SW_DONE_USING_I2C_REG again.
* Remove unnecessary clear of DC_I2C_SW_USE_I2C_REG_REQ, which engine
ignores according to specification.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com> Signed-off-by: Ivan Lipski <ivan.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ce Sun [Fri, 11 Jul 2025 09:57:25 +0000 (17:57 +0800)]
drm/amdgpu: The interrupt source was not released
When the driver is unloaded, the interrupt source of
the rma device is not released, resulting in the failure
of hw_init when loading again using bad_page_threshold.
Signed-off-by: Ce Sun <cesun102@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Han Gao [Wed, 9 Jul 2025 06:51:38 +0000 (14:51 +0800)]
drm/amdkfd: enable kfd on LoongArch systems
KFD has been confirmed that can run on LoongArch systems.
It's necessary to support CONFIG_HSA_AMD on LoongArch.
Signed-off-by: Han Gao <rabenda.cn@gmail.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 7 Jul 2025 13:56:35 +0000 (09:56 -0400)]
drm/amdgpu/gfx10: fix kiq locking in KCQ reset
The ring test needs to be inside the lock.
Fixes: 097af47d3cfb ("drm/amdgpu/gfx10: wait for reset done before remap") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jiadong Zhu <Jiadong.Zhu@amd.com>
projects / thirdparty / kernel / linux.git / log
