Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
The `ims_pcu_process_data()` processes incoming URB data byte by byte.
However, it fails to check if the `read_pos` index exceeds
IMS_PCU_BUF_SIZE.
If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE,
`read_pos` will increment indefinitely. Moreover, since `read_pos` is
located immediately after `read_buf`, the attacker can overwrite
`read_pos` itself to arbitrarily control the index.
This manipulated `read_pos` is subsequently used in
`ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a
heap buffer overflow.
Specifically, an attacker can overwrite the `cmd_done.wait.head` located
at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`.
Consequently, when the driver calls `complete(&pcu->cmd_done)`, it
triggers a control flow hijack by using the manipulated pointer.
Fix this by adding a bounds check for `read_pos` before writing to
`read_buf`. If the packet is too long, discard it, log a warning,
and reset the parser state.
Fixes: 628329d524743 ("Input: add IMS Passenger Control Unit driver") Co-developed-by: Sanghoon Choi <csh0052@gmail.com> Signed-off-by: Sanghoon Choi <csh0052@gmail.com> Signed-off-by: Seungjin Bae <eeodqql09@gmail.com> Link: https://patch.msgid.link/20251221211442.841549-2-eeodqql09@gmail.com
[dtor: factor out resetting packet state, reset checksum as well] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Amit Pundir [Tue, 7 Apr 2026 06:43:55 +0000 (08:43 +0200)]
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
Some firmware versions do not support the host capability QMI request.
Since this request occurs before firmware-N.bin and board-M.bin are
loaded, the quirk cannot be expressed in the firmware itself.
The root cause is unclear, but there appears to be a generation of
firmware that lacks host capability support.
Without this quirk, ath10k_qmi_host_cap_send_sync() returns
QMI_ERR_MALFORMED_MSG_V01 before loading the firmware. This error is not
fatal - Wi-Fi services still come up successfully if the request is simply
skipped.
Add a device-tree quirk to skip the host capability QMI request on devices
whose firmware does not support it.
For example, firmware build
"QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c3-00257-QCAHLSWMTPLZ-1"
on Xiaomi Poco F1 phone requires this quirk.
Suggested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Paul Sajna <sajattack@postmarketos.org> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://patch.msgid.link/20260407-skip-host-cam-qmi-req-v5-2-dfa8a05c6538@ixit.cz Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Amit Pundir [Tue, 7 Apr 2026 06:43:54 +0000 (08:43 +0200)]
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
Some firmware versions do not support the host-capability QMI request.
Since this request occurs before firmware and board files are loaded,
the quirk cannot be expressed in the firmware itself and must be described
in the device tree.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Co-developed-by: David Heidelberg <david@ixit.cz> Signed-off-by: David Heidelberg <david@ixit.cz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Link: https://patch.msgid.link/20260407-skip-host-cam-qmi-req-v5-1-dfa8a05c6538@ixit.cz Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Haoyu Lu [Tue, 7 Apr 2026 03:31:15 +0000 (11:31 +0800)]
ACPI: AGDI: fix missing newline in error message
Add the missing trailing newline to the dev_err() message
printed when SDEI event registration fails.
This keeps the error output as a properly terminated log line.
Fixes: a2a591fb76e6 ("ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device") Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Haoyu Lu <hechushiguitu666@gmail.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Tue, 7 Apr 2026 13:16:50 +0000 (14:16 +0100)]
arm64: Check DAIF (and PMR) at task-switch time
When __switch_to() switches from a 'prev' task to a 'next' task, various
pieces of CPU state are expected to have specific values, such that
these do not need to be saved/restored. If any of these hold an
unexpected value when switching away from the prev task, they could lead
to surprising behaviour in the context of the next task, and it would be
difficult to determine where they were configured to their unexpected
value.
Add some checks for DAIF and PMR at task-switch time so that we can
detect such issues.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jinjie Ruan <ruanjinjie@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@kernel.org> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Tue, 7 Apr 2026 13:16:49 +0000 (14:16 +0100)]
arm64: entry: Use split preemption logic
The generic irqentry code now provides
irqentry_exit_to_kernel_mode_preempt() and
irqentry_exit_to_kernel_mode_after_preempt(), which can be used
where architectures have different state requirements for involuntary
preemption and exception return, as is the case on arm64.
Use the new functions on arm64, aligning our exit to kernel mode logic
with the style of our exit to user mode logic. This removes the need for
the recently-added bodge in arch_irqentry_exit_need_resched(), and
allows preemption to occur when returning from any exception taken from
kernel mode, which is nicer for RT.
In an ideal world, we'd remove arch_irqentry_exit_need_resched(), and
fold the conditionality directly into the architecture-specific entry
code. That way all the logic necessary to avoid preempting from a
pseudo-NMI could be constrained specifically to the EL1 IRQ/FIQ paths,
avoiding redundant work for other exceptions, and making the flow a bit
clearer. At present it looks like that would require a larger
refactoring (e.g. for the PREEMPT_DYNAMIC logic), and so I've left that
as-is for now.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jinjie Ruan <ruanjinjie@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@kernel.org> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Tue, 7 Apr 2026 13:16:48 +0000 (14:16 +0100)]
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
The generic irqentry code now provides irqentry_enter_from_kernel_mode()
and irqentry_exit_to_kernel_mode(), which can be used when an exception
is known to be taken from kernel mode. These can be inlined into
architecture-specific entry code, and avoid redundant work to test
whether the exception was taken from user mode.
Use these in arm64_enter_from_kernel_mode() and
arm64_exit_to_kernel_mode(), which are only used for exceptions known to
be taken from kernel mode. This will remove a small amount of redundant
work, and will permit further changes to arm64_exit_to_kernel_mode() in
subsequent patches.
There should be no funcitonal change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jinjie Ruan <ruanjinjie@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@kernel.org> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For historical reasons, arm64's entry code has arm64-specific functions
named enter_from_kernel_mode() and exit_to_kernel_mode(), which are
wrappers for similarly-named functions from the generic irqentry code.
Other arm64-specific wrappers have an 'arm64_' prefix to clearly
distinguish them from their generic counterparts, e.g.
arm64_enter_from_user_mode() and arm64_exit_to_user_mode().
For consistency and clarity, add an 'arm64_' prefix to these functions.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jinjie Ruan <ruanjinjie@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@kernel.org> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Mark Rutland [Tue, 7 Apr 2026 13:16:46 +0000 (14:16 +0100)]
arm64: entry: Don't preempt with SError or Debug masked
On arm64, involuntary kernel preemption has been subtly broken since the
move to the generic irqentry code. When preemption occurs, the new task
may run with SError and Debug exceptions masked unexpectedly, leading to
a loss of RAS events, breakpoints, watchpoints, and single-step
exceptions.
Prior to moving to the generic irqentry code, involuntary preemption of
kernel mode would only occur when returning from regular interrupts, in
a state where interrupts were masked and all other arm64-specific
exceptions (SError, Debug, and pseudo-NMI) were unmasked. This is the
only state in which it is valid to switch tasks.
As part of moving to the generic irqentry code, the involuntary
preemption logic was moved such that involuntary preemption could occur
when returning from any (non-NMI) exception. As most exception handlers
mask all arm64-specific exceptions before this point, preemption could
occur in a state where arm64-specific exceptions were masked. This is
not a valid state to switch tasks, and resulted in the loss of
exceptions described above.
As a temporary bodge, avoid the loss of exceptions by avoiding
involuntary preemption when SError and/or Debug exceptions are masked.
Practically speaking this means that involuntary preemption will only
occur when returning from regular interrupts, as was the case before
moving to the generic irqentry code.
Fixes: 99eb057ccd67 ("arm64: entry: Move arm64_preempt_schedule_irq() into __exit_to_kernel_mode()") Reported-by: Ada Couprie Diaz <ada.coupriediaz@arm.com> Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jinjie Ruan <ruanjinjie@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Shuicheng Lin [Tue, 7 Apr 2026 03:00:46 +0000 (03:00 +0000)]
drm/xe/uapi: Fix doc formatting and completeness in xe_drm.h
- Fix missing leading space before closing */ in
comment block
- Add DRM_IOCTL_XE_EXEC_QUEUE_SET_PROPERTY to the
IOCTL overview list
- Add missing query types to the device query doc list:
DRM_XE_DEVICE_QUERY_UC_FW_VERSION,
DRM_XE_DEVICE_QUERY_OA_UNITS,
DRM_XE_DEVICE_QUERY_EU_STALL
- Fix ioctl's -> ioctls (not possessive, 2 occurrences)
- Remove duplicate parameter docs from
drm_xe_mem_range_attr overview (already documented
as inline member comments)
- Fix extra whitespace before /** on 2 lines in
drm_xe_mem_range_attr
- Add missing blank line before DRM_XE_VM_BIND_FLAG_DECOMPRESS
bullet to fix RST block quote warning
Shuicheng Lin [Tue, 7 Apr 2026 03:00:45 +0000 (03:00 +0000)]
drm/xe/uapi: Fix code examples in xe_drm.h documentation
Fix incorrect field names and formatting in code examples:
- .num_bb_per_exec -> .width (renamed struct field
in exec_queue_create examples)
- .num_eng_per_bb -> .num_placements (renamed struct
field in exec_queue_create examples)
- .atomic_val -> .atomic.val (correct nested struct
field access in madvise example)
- Remove unnecessary backslash escaping in UUID format
string (%\08x -> %08x)
- Fix descriptive text trapped inside code-block in
exec_queue_create doc (split into two code blocks)
v3: one more fix of split code-block in exec_queue_create doc.
Shuicheng Lin [Tue, 7 Apr 2026 03:00:44 +0000 (03:00 +0000)]
drm/xe/uapi: Fix kernel-doc cross-reference syntax in xe_drm.h
Fix incorrect kernel-doc cross-reference markup syntax
throughout xe_drm.h:
- @struct_name -> &struct name for cross-references to other
structs (19 occurrences)
- struct @name -> &struct name where struct keyword was
mixed with @ syntax (8 occurrences)
- enum @name -> &enum name for cross-references to other
enums (5 occurrences)
- &CONSTANT / @CONSTANT -> %CONSTANT for defines and enum
values (15 occurrences)
- @field references to members of other structs -> plain text,
since @ only applies to the current struct's members
(9 occurrences)
Per kernel-doc conventions (Documentation/doc-guide/kernel-doc.rst):
- '&struct name' creates hyperlinks to struct definitions
- '&enum name' creates hyperlinks to enum definitions
- '%NAME' references constants and defines
- '@name' is only for parameters/members of the current context
Shuicheng Lin [Tue, 7 Apr 2026 03:00:42 +0000 (03:00 +0000)]
drm/xe/uapi: Fix grammar errors in xe_drm.h documentation
Fix various grammar issues in doc comments:
- flag are only valid -> flag is only valid
- should only ever used -> should only ever be used
- if isn't already -> if it isn't already
- Type of the this -> Type of this
- When sync passed in -> When sync is passed in
- the users responsibility -> the user's responsibility
- must qword aligned -> must be qword aligned
- for a observation -> for an observation
- a memory ranges -> memory ranges
- for each memory ranges -> for each memory range.
- Second ioctl call -> second ioctl call
Jonathan Cavitt [Mon, 16 Mar 2026 16:20:04 +0000 (16:20 +0000)]
drm/xe/tlb: Init range tilemask err to zero
Initialize err = 0 in xe_tlb_inval_range_tilemask_submit to prevent a
possible uninitialized value return in the case where the tile_mask
somehow doesn't match any available tile ids.
ASoC: amd: acp: update DMI quirk and add ACP DMIC for Lenovo platforms
Replace DMI_EXACT_MATCH with DMI_MATCH for Lenovo SKU entries (21YW,
21YX) so the quirk applies to all variants of these models, not just
exact SKU matches.
Add ASOC_SDW_ACP_DMIC flag alongside ASOC_SDW_CODEC_SPKR in driver_data
for these Lenovo platform entries, as these platforms use ACP PDM DMIC
instead of SoundWire DMIC for digital microphone support.
Fixes: 3acf517e1ae0 ("ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models") Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com> Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://patch.msgid.link/20260408133029.1368317-1-syed.sabakareem@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
Use xe_map_resource_to_region helper instead of direct access
Renaming:
The helper function res_to_mem_region is now xe_map_resource_to_region.
Abstraction:
The patch removes instances where block->private was accessed directly
to obtain VRAM region data allowing VRAM manager to own block->private
for future use cases.
V2(MattB): Add more detail about patch also adjust variable placement
ASoC: SDCA: Unregister IRQ handlers on module remove
Ensure that all interrupt handlers are unregistered before the parent
regmap_irq is unregistered.
sdca_irq_cleanup() was only called from the component_remove(). If the
module was loaded and removed without ever being component probed the
FDL interrupts would not be unregistered and this would hit a WARN
when devm called regmap_del_irq_chip() during the removal of the
parent IRQ.
Fixes: 4e53116437e9 ("ASoC: SDCA: Fix errors in IRQ cleanup") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260408093835.2881486-5-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Maciej Strozek [Wed, 8 Apr 2026 09:38:31 +0000 (10:38 +0100)]
ASoC: SDCA: Fix overwritten var within for loop
mask variable should not be overwritten within the for loop or it will
skip certain bits. Change to using BIT() macro.
Fixes: b9ab3b618241 ("ASoC: SDCA: Add some initial IRQ handlers") Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20260408093835.2881486-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Using this port configuration, one will be able to set the Maximum Data
Transfer Size (MDTS) for any controller that will be associated to the
configured port. The default value remains 0 (no limit).
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Aurelien Aptel <aaptel@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
Geliang Tang [Tue, 31 Mar 2026 08:17:31 +0000 (16:17 +0800)]
nvme: add missing MODULE_ALIAS for fabrics transports
The generic fabrics layer uses request_module("nvme-%s", opts->transport)
to auto-load transport modules. Currently, the nvme-tcp, nvme-rdma, and
nvme-fc modules lack MODULE_ALIAS entries for these names, which prevents
the kernel from automatically finding and loading them when requested.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Keith Busch <kbusch@kernel.org>
Dmitry Torokhov [Thu, 8 Aug 2024 17:27:31 +0000 (10:27 -0700)]
Input: ct82c710 - remove driver
This is a PS/2 mouse interface chip from Chips & Technologies that was
used in TI TravelMate and Gateway Nomad laptops, which used 386 and 486
CPUs. With 486 support being removed from the kernel (and 386 support is
long gone) it is time to retire this driver as well.
Mark Brown [Wed, 8 Apr 2026 14:57:55 +0000 (15:57 +0100)]
Add Renesas RZ/G3L RSPI support
Biju <biju.das.au@gmail.com> says:
This patch series adds binding and driver support for RSPI IP found on the
RZ/G3L SoC. The RSPI is compatible with RZ/V2H RSPI, but has 2 clocks
compared to 3 on RZ/V2H.
Document RSPI IP found on the RZ/G3L SoC. The RSPI IP is compatible with
the RZ/V2H RSPI IP, but has 2 clocks compared to 3 on RZ/V2H.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patch.msgid.link/20260408085418.18770-2-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
Dmitry Torokhov [Thu, 8 Aug 2024 17:27:30 +0000 (10:27 -0700)]
Input: mk712 - remove driver
This touchscreen controller was used om Gateway AOL Connected Touchpad
released in 2000 and, according to Wikipedia, removed from the market
in October 2001 due to slow sales.
It looks like it can still be bought on eBay for $1000 but I really
doubt anyone will actually use it.
Dmitry Torokhov [Thu, 8 Aug 2024 17:27:27 +0000 (10:27 -0700)]
Input: inport - remove driver
Inport (ATI XL and Microsoft) mice use specialized bus interface
implemented via an ISA add-in card. Have been superseded by PS/2 and
then USB, and are historical curiosity by now.
firmware: efi: Never declare sysfb_primary_display on x86
The x86 architecture comes with its own instance of the global
state variable sysfb_primary_display. Never declare it in the EFI
subsystem. Fix the test for CONFIG_FIRMWARE_EDID accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: e65ca1646311 ("efi: export sysfb_primary_display for EDID") Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Steven Price [Wed, 8 Apr 2026 09:12:42 +0000 (10:12 +0100)]
drm/panthor: Fix kernel-doc in panthor_sched.c so it's visible
Various substructures defined in panthor_sched.c have kernel-doc which
is silently ignored because it doesn't include the full path to the
member. Fix these issues so that the kernel-doc text is actually output
by including the name of the parent.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Link: https://patch.msgid.link/20260408091242.799074-1-steven.price@arm.com
Documentation: gpio: update the preferred method for using software node lookup
In its current version, the manual for converting of board files from
using GPIO lookup tables to software nodes recommends leaving the
software nodes representing GPIO controllers as "free-floating", not
attached objects and relying on the matching of their names against the
GPIO controller's name. This is an abuse of the software node API and
makes it impossible to create fw_devlinks between GPIO suppliers and
consumers in this case. We want to remove this behavior from GPIOLIB and
to this end, work on converting all existing drivers to using "attached"
software nodes.
Except for a few corner-cases where board files define consumers
depending on GPIO controllers described in firmware - where we need to
reference a real firmware node from a software node - which requires a
more complex approach, most board files can easily be converted to using
propert firmware node lookup.
Update the documentation to recommend attaching the GPIO chip's software
nodes to the actual platform devices and show how to do it.
Randy Dunlap [Tue, 7 Apr 2026 04:36:48 +0000 (21:36 -0700)]
dma-fence: correct kernel-doc function parameter @flags
'make htmldocs' complains that dma_fence_unlock_irqrestore() is missing
a description of its @flags parameter. The description is there but it is
missing a ':' sign. Add that and correct the possessive form of "its".
WARNING: ../include/linux/dma-fence.h:414 function parameter 'flags' not described in 'dma_fence_unlock_irqrestore'
Fixes: 3e5067931b5d ("dma-buf: abstract fence locking v2") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20260407043649.2015894-1-rdunlap@infradead.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
Merge tag 'md-7.1-20260407' of git://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-7.1/block
Pull MD changes from Yu Kuai:
"Bug Fixes:
- avoid a sysfs deadlock when clearing array state (Yu Kuai)
- validate raid5 journal payloads before reading metadata (Junrui Luo)
- fall back to the correct bitmap operations after version mismatches
(Yu Kuai)
- serialize overlapping writes on writemostly raid1 disks (Xiao Ni)
- wake raid456 reshape waiters before suspend (Yu Kuai)
- prevent retry_aligned_read() from triggering soft lockups
(Chia-Ming Chang)
Improvements:
- switch raid0 strip zone and devlist allocations to kvmalloc helpers
(Gregory Price)
- track clean unwritten stripes for proactive RAID5 parity building
(Yu Kuai)
- speed up initial llbitmap sync with write_zeroes_unmap support
(Yu Kuai)
* tag 'md-7.1-20260407' of git://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid5: fix soft lockup in retry_aligned_read()
md: wake raid456 reshape waiters before suspend
md/raid1: serialize overlap io for writemostly disk
md/md-llbitmap: optimize initial sync with write_zeroes_unmap support
md/md-llbitmap: add CleanUnwritten state for RAID-5 proactive parity building
md: add fallback to correct bitmap_ops on version mismatch
md/raid5: validate payload size before accessing journal metadata
md: remove unused static md_wq workqueue
md/raid0: use kvzalloc/kvfree for strip_zone and devlist allocations
md: fix array_state=clear sysfs deadlock
Tomasz Merta [Wed, 8 Apr 2026 08:40:56 +0000 (10:40 +0200)]
ASoC: stm32_sai: fix incorrect BCLK polarity for DSP_A/B, LEFT_J
The STM32 SAI driver do not set the clock strobing bit (CKSTR) for DSP_A,
DSP_B and LEFT_J formats, causing data to be sampled on the wrong BCLK
edge when SND_SOC_DAIFMT_NB_NF is used.
Per ALSA convention, NB_NF requires sampling on the rising BCLK edge.
The STM32MP25 SAI reference manual states that CKSTR=1 is required for
signals received by the SAI to be sampled on the SCK rising edge.
Without setting CKSTR=1, the SAI samples on the falling edge, violating
the NB_NF convention. For comparison, the NXP FSL SAI driver correctly
sets FSL_SAI_CR2_BCP for DSP_A, DSP_B and LEFT_J, consistent with its
I2S handling.
This patch adds SAI_XCR1_CKSTR for DSP_A, DSP_B and LEFT_J in
stm32_sai_set_dai_fmt which was verified empirically with a cs47l35 codec.
RIGHT_J (LSB) is not investigated and addressed by this patch.
Note: the STM32 I2S driver (stm32_i2s_set_dai_fmt) may have the same issue
for DSP_A mode, as I2S_CGFR_CKPOL is not set. This has not been verified
and is left for a separate investigation.
Kai Vehmanen [Wed, 8 Apr 2026 08:45:14 +0000 (11:45 +0300)]
ASoC: SOF: Intel: hda: modify period size constraints for ACE4
Intel ACE4 based products set more strict constraints on HDA BDLE start
address and length alignment. Add a constraint to align period size to
128 bytes.
The commit removes the "minimum as per HDA spec" comment. This comment
was misleading as spec actually does allow a 2 byte BDLE length, and
more importantly, period size also directly impacts how the BDLE start
addresses are aligned, so it is not sufficient just to consider allowed
buffer length.
Kai Vehmanen [Wed, 8 Apr 2026 08:45:13 +0000 (11:45 +0300)]
ALSA: hda/intel: enforce stricter period-size alignment for Intel NVL
Intel ACE4 based products set more strict constraints on HDA BDLE start
address and length alignment. Modify capability flags to drop
AZX_DCAPS_NO_ALIGN_BUFSIZE for Intel Nova Lake platforms.
Currently, the driver only performs a hardware reset during the I2C probe
sequence. To ensure all internal states of the codec are properly cleared
without affecting the configuration registers, a software reset is also
required.
According to the hardware specification, writing to the Software Reset
register (R01) twice will reset all internal states safely.
This patch adds the nau8325_software_reset() function, executes it right
after the hardware reset in the probe function, and marks the R01 register
as writeable in the regmap configuration.
Ville Syrjälä [Tue, 7 Apr 2026 17:52:43 +0000 (20:52 +0300)]
drm/i915/casf: Integrate the sharpness filter properly into the scaler code
The sharpness filter is just a special mode of the pipe scaler.
It doesn't warrant all this special casing everywhere. Just
integrate it properly into the scaler code so that it's treated
no different from the other pipe scaler uses (scaling,centering,
YCbCr 4:2:0 output).
Ville Syrjälä [Tue, 7 Apr 2026 17:52:42 +0000 (20:52 +0300)]
drm/i915/pfit: Call intel_pfit_compute_config() unconditionally on (e)DP/HDMI
We now have three different reasons for calling
intel_pfit_compute_config():
- actual pfit scaling/centering
- YCbCr 4:2:0 output
- sharpness filter
So let's just call intel_pfit_compute_config() unconditionally
from both the DP and HDMI code. Both gmch and ilk+ pfit code
should be capable of judging whether anything actually
needs the pfit.
The only slightly questionable thing in the gmch code is
the dithering knob, but that's only a thing on gen2/3 which
don't even have HDMI/DP outputs, and so not an issue here.
Ville Syrjälä [Tue, 7 Apr 2026 17:52:39 +0000 (20:52 +0300)]
drm/i915/casf: Handle CASF in skl_scaler_get_filter_select()
Nuke the duplicate CASF_SCALER_FILTER_SELECT and just have
skl_scaler_get_filter_select() return the proper value for
sharpness filter use. It is the same "use programmable coefficients"
value we already use for the nearest neighbor filtering.
Ville Syrjälä [Tue, 7 Apr 2026 17:52:37 +0000 (20:52 +0300)]
drm/i915/casf: Move the casf state to better place
The casf state is placed inside the 'hw' state for some reason.
That is only really meant for things we have to duplicate from
the uapi state. The rest can live on its own in our actual state.
And since casf is just one aspect of the pfit/pipe scaler the
proper place for it seems to be under pch_pfit.
selftests: nft_queue.sh: add a parallel stress test
Introduce a new stress test to check for race conditions in the
nfnetlink_queue subsystem, where an entry is freed while another CPU is
concurrently walking the global rhashtable.
To trigger this, `nf_queue.c` is extended with two new flags:
* -O (out-of-order): Buffers packet IDs and flushes them in reverse.
* -b (bogus verdicts): Floods the kernel with non-existent packet IDs.
The bogus verdict loop forces the kernel's lookup function to perform
full rhashtable bucket traversals (-ENOENT). Combined with reverse-order
flushing and heavy parallel UDP/ping flooding across 8 queues, this puts
the nfnetlink_queue code under pressure.
Joint work with Florian Westphal.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Signed-off-by: Florian Westphal <fw@strlen.de>
Tuan Do [Fri, 3 Apr 2026 07:33:17 +0000 (00:33 -0700)]
netfilter: nft_ct: fix use-after-free in timeout object destroy
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
netfilter: ip6t_eui64: reject invalid MAC header for all packets
`eui64_mt6()` derives a modified EUI-64 from the Ethernet source address
and compares it with the low 64 bits of the IPv6 source address.
The existing guard only rejects an invalid MAC header when
`par->fragoff != 0`. For packets with `par->fragoff == 0`, `eui64_mt6()`
can still reach `eth_hdr(skb)` even when the MAC header is not valid.
Fix this by removing the `par->fragoff != 0` condition so that packets
with an invalid MAC header are rejected before accessing `eth_hdr(skb)`.
Fixes: 1da177e4c3f41 ("Linux-2.6.12-rc2") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Florian Westphal <fw@strlen.de>
netfilter: xt_multiport: validate range encoding in checkentry
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start.
Fixes: a89ecb6a2ef7 ("[NETFILTER]: x_tables: unify IPv4/IPv6 multiport match") Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Yuhang Zheng <z1652074432@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Florian Westphal <fw@strlen.de>
Xiang Mei [Wed, 1 Apr 2026 21:20:57 +0000 (14:20 -0700)]
netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator
When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()
appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via
nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()
helper only zeroes alignment padding after the payload, not the payload
itself, so four bytes of stale kernel heap data are leaked to userspace
in the NLMSG_DONE message body.
Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes
the nfgenmsg payload via nfnl_fill_hdr(), consistent with how
__build_packet_message() already constructs NFULNL_MSG_PACKET headers.
Fixes: 29c5d4afba51 ("[NETFILTER]: nfnetlink_log: fix sending of multipart messages") Reported-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Florian Westphal <fw@strlen.de>
Weiming Shi [Wed, 1 Apr 2026 07:58:01 +0000 (15:58 +0800)]
ipvs: fix NULL deref in ip_vs_add_service error path
When ip_vs_bind_scheduler() succeeds in ip_vs_add_service(), the local
variable sched is set to NULL. If ip_vs_start_estimator() subsequently
fails, the out_err cleanup calls ip_vs_unbind_scheduler(svc, sched)
with sched == NULL. ip_vs_unbind_scheduler() passes the cur_sched NULL
check (because svc->scheduler was set by the successful bind) but then
dereferences the NULL sched parameter at sched->done_service, causing a
kernel panic at offset 0x30 from NULL.
Oops: general protection fault, [..] [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
RIP: 0010:ip_vs_unbind_scheduler (net/netfilter/ipvs/ip_vs_sched.c:69)
Call Trace:
<TASK>
ip_vs_add_service.isra.0 (net/netfilter/ipvs/ip_vs_ctl.c:1500)
do_ip_vs_set_ctl (net/netfilter/ipvs/ip_vs_ctl.c:2809)
nf_setsockopt (net/netfilter/nf_sockopt.c:102)
[..]
Fix by simply not clearing the local sched variable after a successful
bind. ip_vs_unbind_scheduler() already detects whether a scheduler is
installed via svc->scheduler, and keeping sched non-NULL ensures the
error path passes the correct pointer to both ip_vs_unbind_scheduler()
and ip_vs_scheduler_put().
While the bug is older, the problem popups in more recent kernels (6.2),
when the new error path is taken after the ip_vs_start_estimator() call.
Fixes: 705dd3444081 ("ipvs: use kthreads for stats estimation") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Acked-by: Simon Horman <horms@kernel.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Florian Westphal <fw@strlen.de>
drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeat
A use-after-free / refcount underflow is possible when the heartbeat
worker and intel_engine_park_heartbeat() race to release the same
engine->heartbeat.systole request.
The heartbeat worker reads engine->heartbeat.systole and calls
i915_request_put() on it when the request is complete, but clears
the pointer in a separate, non-atomic step. Concurrently, a request
retirement on another CPU can drop the engine wakeref to zero, triggering
__engine_park() -> intel_engine_park_heartbeat(). If the heartbeat
timer is pending at that point, cancel_delayed_work() returns true and
intel_engine_park_heartbeat() reads the stale non-NULL systole pointer
and calls i915_request_put() on it again, causing a refcount underflow:
Fix this by replacing the non-atomic pointer read + separate clear with
xchg() in both racing paths. xchg() is a single indivisible hardware
instruction that atomically reads the old pointer and writes NULL. This
guarantees only one of the two concurrent callers obtains the non-NULL
pointer and performs the put, the other gets NULL and skips it.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/15880 Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats") Cc: <stable@vger.kernel.org> # v5.5+ Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/d4c1c14255688dd07cc8044973c4f032a8d1559e.1775038106.git.sebastian.brzezinka@intel.com
(cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Marc Zyngier [Wed, 8 Apr 2026 11:26:11 +0000 (12:26 +0100)]
Merge branch kvm-arm64/misc-7.1 into kvmarm-master/next
* kvm-arm64/misc-7.1:
KVM: arm64: selftests: Avoid testing the IMPDEF behavior
KVM: arm64: Destroy stage-2 page-table in kvm_arch_destroy_vm()
KVM: arm64: Don't leave mmu->pgt dangling on kvm_init_stage2_mmu() error
KVM: arm64: Prevent the host from using an smc with imm16 != 0
Marc Zyngier [Wed, 8 Apr 2026 11:26:00 +0000 (12:26 +0100)]
Merge branch kvm-arm64/vgic-fixes-7.1 into kvmarm-master/next
* kvm-arm64/vgic-fixes-7.1:
: .
: FIrst pass at fixing a number of vgic-v5 bugs that were found
: after the merge of the initial series.
: .
KVM: arm64: Advertise ID_AA64PFR2_EL1.GCIE
KVM: arm64: vgic-v5: Fold PPI state for all exposed PPIs
KVM: arm64: set_id_regs: Allow GICv3 support to be set at runtime
KVM: arm64: Don't advertises GICv3 in ID_PFR1_EL1 if AArch32 isn't supported
KVM: arm64: Correctly plumb ID_AA64PFR2_EL1 into pkvm idreg handling
KVM: arm64: Move GICv5 timer PPI validation into timer_irqs_are_valid()
KVM: arm64: Remove evaluation of timer state in kvm_cpu_has_pending_timer()
KVM: arm64: Kill arch_timer_context::direct field
KVM: arm64: vgic-v5: Correctly set dist->ready once initialised
KVM: arm64: vgic-v5: Make the effective priority mask a strict limit
KVM: arm64: vgic-v5: Cast vgic_apr to u32 to avoid undefined behaviours
KVM: arm64: vgic-v5: Transfer edge pending state to ICH_PPI_PENDRx_EL2
KVM: arm64: vgic-v5: Hold config_lock while finalizing GICv5 PPIs
KVM: arm64: Account for RESx bits in __compute_fgt()
KVM: arm64: Fix writeable mask for ID_AA64PFR2_EL1
arm64: Fix field references for ICH_PPI_DVIR[01]_EL2
KVM: arm64: Don't skip per-vcpu NV initialisation
KVM: arm64: vgic: Don't reset cpuif/redist addresses at finalize time
Marc Zyngier [Wed, 8 Apr 2026 11:25:39 +0000 (12:25 +0100)]
Merge branch kvm-arm64/pkvm-protected-guest into kvmarm-master/next
* kvm-arm64/pkvm-protected-guest: (41 commits)
: .
: pKVM support for protected guests, implementing the very long
: awaited support for anonymous memory, as the elusive guestmem
: has failed to deliver on its promises despite a multi-year
: effort. Patches courtesy of Will Deacon. From the initial cover
: letter:
:
: "[...] this patch series implements support for protected guest
: memory with pKVM, where pages are unmapped from the host as they are
: faulted into the guest and can be shared back from the guest using pKVM
: hypercalls. Protected guests are created using a new machine type
: identifier and can be booted to a shell using the kvmtool patches
: available at [2], which finally means that we are able to test the pVM
: logic in pKVM. Since this is an incremental step towards full isolation
: from the host (for example, the CPU register state and DMA accesses are
: not yet isolated), creating a pVM requires a developer Kconfig option to
: be enabled in addition to booting with 'kvm-arm.mode=protected' and
: results in a kernel taint."
: .
KVM: arm64: Don't hold 'vm_table_lock' across guest page reclaim
KVM: arm64: Allow get_pkvm_hyp_vm() to take a reference to a dying VM
KVM: arm64: Prevent teardown finalisation of referenced 'hyp_vm'
drivers/virt: pkvm: Add Kconfig dependency on DMA_RESTRICTED_POOL
KVM: arm64: Rename PKVM_PAGE_STATE_MASK
KVM: arm64: Extend pKVM page ownership selftests to cover guest hvcs
KVM: arm64: Extend pKVM page ownership selftests to cover forced reclaim
KVM: arm64: Register 'selftest_vm' in the VM table
KVM: arm64: Extend pKVM page ownership selftests to cover guest donation
KVM: arm64: Add some initial documentation for pKVM
KVM: arm64: Allow userspace to create protected VMs when pKVM is enabled
KVM: arm64: Implement the MEM_UNSHARE hypercall for protected VMs
KVM: arm64: Implement the MEM_SHARE hypercall for protected VMs
KVM: arm64: Add hvc handler at EL2 for hypercalls from protected VMs
KVM: arm64: Return -EFAULT from VCPU_RUN on access to a poisoned pte
KVM: arm64: Reclaim faulting page from pKVM in spurious fault handler
KVM: arm64: Introduce hypercall to force reclaim of a protected page
KVM: arm64: Annotate guest donations with handle and gfn in host stage-2
KVM: arm64: Change 'pkvm_handle_t' to u16
KVM: arm64: Introduce host_stage2_set_owner_metadata_locked()
...
Marc Zyngier [Wed, 8 Apr 2026 11:23:58 +0000 (12:23 +0100)]
Merge branch kvm-arm64/spe-trbe-nvhe into kvmarm-master/next
* kvm-arm64/spe-trbe-nvhe:
: .
: Fix SPE and TRBE nVHE world switch which can otherwise result in
: pretty bad behaviours, as they have the nasty habit of performing
: out of context speculative page table walks.
:
: Patches courtesy of Will Deacon.
: .
KVM: arm64: Don't pass host_debug_state to BRBE world-switch routines
KVM: arm64: Disable SPE Profiling Buffer when running in guest context
KVM: arm64: Disable TRBE Trace Buffer Unit when running in guest context
Marc Zyngier [Wed, 8 Apr 2026 11:23:45 +0000 (12:23 +0100)]
Merge branch kvm-arm64/user_mem_abort-rework into kvmarm-master/next
* kvm-arm64/user_mem_abort-rework: (30 commits)
: .
: user_mem_abort() has become an absolute pain to maintain,
: to the point that each single fix is likely to introduce
: *two* new bugs.
:
: Deconstruct the whole thing in logical units, reducing
: the amount of visible and/or mutable state between functions,
: and finally making the code a bit more maintainable.
: .
KVM: arm64: Convert gmem_abort() to struct kvm_s2_fault_desc
KVM: arm64: Simplify integration of adjust_nested_*_perms()
KVM: arm64: Directly expose mapping prot and kill kvm_s2_fault
KVM: arm64: Move device mapping management into kvm_s2_fault_pin_pfn()
KVM: arm64: Replace force_pte with a max_map_size attribute
KVM: arm64: Move kvm_s2_fault.{pfn,page} to kvm_s2_vma_info
KVM: arm64: Restrict the scope of the 'writable' attribute
KVM: arm64: Kill logging_active from kvm_s2_fault
KVM: arm64: Move VMA-related information to kvm_s2_fault_vma_info
KVM: arm64: Kill topup_memcache from kvm_s2_fault
KVM: arm64: Kill exec_fault from kvm_s2_fault
KVM: arm64: Kill write_fault from kvm_s2_fault
KVM: arm64: Constrain fault_granule to kvm_s2_fault_map()
KVM: arm64: Replace fault_is_perm with a helper
KVM: arm64: Move fault context to const structure
KVM: arm64: Make fault_ipa immutable
KVM: arm64: Kill fault->ipa
KVM: arm64: Clean up control flow in kvm_s2_fault_map()
KVM: arm64: Hoist MTE validation check out of MMU lock path
KVM: arm64: Optimize early exit checks in kvm_s2_fault_pin_pfn()
...
Marc Zyngier [Wed, 8 Apr 2026 11:23:24 +0000 (12:23 +0100)]
Merge branch kvm-arm64/pkvm-psci into kvmarm-master/next
* kvm-arm64/pkvm-psci:
: .
: Cleanup of the pKVM PSCI relay CPU entry code, making it slightly
: easier to follow, should someone have to wade into these waters
: ever again.
: .
KVM: arm64: Remove extra ISBs when using msr_hcr_el2
KVM: arm64: pkvm: Use direct function pointers for cpu_{on,resume}
KVM: arm64: pkvm: Turn __kvm_hyp_init_cpu into an inner label
KVM: arm64: pkvm: Simplify BTI handling on CPU boot
KVM: arm64: pkvm: Move error handling to the end of kvm_hyp_cpu_entry
Marc Zyngier [Wed, 8 Apr 2026 11:22:55 +0000 (12:22 +0100)]
Merge branch kvm-arm64/nv-s2-debugfs into kvmarm-master/next
* kvm-arm64/nv-s2-debugfs:
: .
: Expand the stage-2 ptdump infrastructure to be able to display
: the content of the shadow s2 tables generated by nested virt.
:
: Patches courtesy of Wei-Lin Chang.
: .
KVM: arm64: ptdump: Initialize parser_state before pgtable walk
KVM: arm64: nv: Expose shadow page tables in debugfs
KVM: arm64: ptdump: Make KVM ptdump code s2 mmu aware
Marc Zyngier [Wed, 8 Apr 2026 11:22:35 +0000 (12:22 +0100)]
Merge branch kvm-arm64/vgic-v5-ppi into kvmarm-master/next
* kvm-arm64/vgic-v5-ppi: (40 commits)
: .
: Add initial GICv5 support for KVM guests, only adding PPI support
: for the time being. Patches courtesy of Sascha Bischoff.
:
: From the cover letter:
:
: "This is v7 of the patch series to add the virtual GICv5 [1] device
: (vgic_v5). Only PPIs are supported by this initial series, and the
: vgic_v5 implementation is restricted to the CPU interface,
: only. Further patch series are to follow in due course, and will add
: support for SPIs, LPIs, the GICv5 IRS, and the GICv5 ITS."
: .
KVM: arm64: selftests: Add no-vgic-v5 selftest
KVM: arm64: selftests: Introduce a minimal GICv5 PPI selftest
KVM: arm64: gic-v5: Communicate userspace-driveable PPIs via a UAPI
Documentation: KVM: Introduce documentation for VGICv5
KVM: arm64: gic-v5: Probe for GICv5 device
KVM: arm64: gic-v5: Set ICH_VCTLR_EL2.En on boot
KVM: arm64: gic-v5: Introduce kvm_arm_vgic_v5_ops and register them
KVM: arm64: gic-v5: Hide FEAT_GCIE from NV GICv5 guests
KVM: arm64: gic: Hide GICv5 for protected guests
KVM: arm64: gic-v5: Mandate architected PPI for PMU emulation on GICv5
KVM: arm64: gic-v5: Enlighten arch timer for GICv5
irqchip/gic-v5: Introduce minimal irq_set_type() for PPIs
KVM: arm64: gic-v5: Initialise ID and priority bits when resetting vcpu
KVM: arm64: gic-v5: Create and initialise vgic_v5
KVM: arm64: gic-v5: Support GICv5 interrupts with KVM_IRQ_LINE
KVM: arm64: gic-v5: Implement direct injection of PPIs
KVM: arm64: Introduce set_direct_injection irq_op
KVM: arm64: gic-v5: Trap and mask guest ICC_PPI_ENABLERx_EL1 writes
KVM: arm64: gic-v5: Check for pending PPIs
KVM: arm64: gic-v5: Clear TWI if single task running
...
Marc Zyngier [Wed, 8 Apr 2026 11:21:51 +0000 (12:21 +0100)]
Merge branch kvm-arm64/hyp-tracing into kvmarm-master/next
* kvm-arm64/hyp-tracing: (40 commits)
: .
: EL2 tracing support, adding both 'remote' ring-buffer
: infrastructure and the tracing itself, courtesy of
: Vincent Donnefort. From the cover letter:
:
: "The growing set of features supported by the hypervisor in protected
: mode necessitates debugging and profiling tools. Tracefs is the
: ideal candidate for this task:
:
: * It is simple to use and to script.
:
: * It is supported by various tools, from the trace-cmd CLI to the
: Android web-based perfetto.
:
: * The ring-buffer, where are stored trace events consists of linked
: pages, making it an ideal structure for sharing between kernel and
: hypervisor.
:
: This series first introduces a new generic way of creating remote events and
: remote buffers. Then it adds support to the pKVM hypervisor."
: .
tracing: selftests: Extend hotplug testing for trace remotes
tracing: Non-consuming read for trace remotes with an offline CPU
tracing: Adjust cmd_check_undefined to show unexpected undefined symbols
tracing: Restore accidentally removed SPDX tag
KVM: arm64: avoid unused-variable warning
tracing: Generate undef symbols allowlist for simple_ring_buffer
KVM: arm64: tracing: add ftrace dependency
tracing: add more symbols to whitelist
tracing: Update undefined symbols allow list for simple_ring_buffer
KVM: arm64: Fix out-of-tree build for nVHE/pKVM tracing
tracing: selftests: Add hypervisor trace remote tests
KVM: arm64: Add selftest event support to nVHE/pKVM hyp
KVM: arm64: Add hyp_enter/hyp_exit events to nVHE/pKVM hyp
KVM: arm64: Add event support to the nVHE/pKVM hyp and trace remote
KVM: arm64: Add trace reset to the nVHE/pKVM hyp
KVM: arm64: Sync boot clock with the nVHE/pKVM hyp
KVM: arm64: Add trace remote for the nVHE/pKVM hyp
KVM: arm64: Add tracing capability for the nVHE/pKVM hyp
KVM: arm64: Support unaligned fixmap in the pKVM hyp
KVM: arm64: Initialise hyp_nr_cpus for nVHE hyp
...
perf/events: Replace READ_ONCE() with standard pgtable accessors
Replace raw READ_ONCE() dereferences of pgtable entries with corresponding
standard page table accessors pxdp_get() in perf_get_pgtable_size(). These
accessors default to READ_ONCE() on platforms that don't override them. So
there is no functional change on such platforms.
However arm64 platform is being extended to support 128 bit page tables via
a new architecture feature i.e FEAT_D128 in which case READ_ONCE() will not
provide required single copy atomic access for 128 bit page table entries.
Although pxdp_get() accessors can later be overridden on arm64 platform to
extend required single copy atomicity support on 128 bit entries.
Michal Koutný [Mon, 23 Mar 2026 12:39:39 +0000 (13:39 +0100)]
sched/rt: Cleanup global RT bandwidth functions
The commit 5f6bd380c7bdb ("sched/rt: Remove default bandwidth control")
and followup changes made a few of the functions unnecessary, drop them
for simplicity.
Michal Koutný [Mon, 23 Mar 2026 12:39:38 +0000 (13:39 +0100)]
sched/rt: Move group schedulability check to sched_rt_global_validate()
The sched_rt_global_constraints() function is a remnant that used to set
up global RT throttling but that is no more since commit 5f6bd380c7bdb
("sched/rt: Remove default bandwidth control") and the function ended up
only doing schedulability check.
Move the check into the validation function where it fits better.
(The order of validations sched_dl_global_validate() and
sched_rt_global_validate() shouldn't matter.)
Michal Koutný [Mon, 23 Mar 2026 12:39:37 +0000 (13:39 +0100)]
sched/rt: Skip group schedulable check with rt_group_sched=0
The warning from the commit 87f1fb77d87a6 ("sched: Add RT_GROUP WARN
checks for non-root task_groups") is wrong -- it assumes that only
task_groups with rt_rq are traversed, however, the schedulability check
would iterate all task_groups even when rt_group_sched=0 is disabled at
boot time but some non-root task_groups exist.
The schedulability check is supposed to validate:
a) that children don't overcommit its parent,
b) no RT task group overcommits global RT limit.
but with rt_group_sched=0 there is no (non-trivial) hierarchy of RT groups,
therefore skip the validation altogether. Otherwise, writes to the
global sched_rt_runtime_us knob will be rejected with incorrect
validation error.
This fix is immaterial with CONFIG_RT_GROUP_SCHED=n.
Peter Zijlstra [Sat, 4 Apr 2026 10:22:44 +0000 (12:22 +0200)]
sched/deadline: Use revised wakeup rule for dl_server
John noted that commit 115135422562 ("sched/deadline: Fix 'stuck' dl_server")
unfixed the issue from commit a3a70caf7906 ("sched/deadline: Fix dl_server
behaviour").
The issue in commit 115135422562 was for wakeups of the server after the
deadline; in which case you *have* to start a new period. The case for a3a70caf7906 is wakeups before the deadline.
Now, because the server is effectively running a least-laxity policy, it means
that any wakeup during the runnable phase means dl_entity_overflow() will be
true. This means we need to adjust the runtime to allow it to still run until
the existing deadline expires.
Use the revised wakeup rule for dl_defer entities.
Fixes: 115135422562 ("sched/deadline: Fix 'stuck' dl_server") Reported-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Tested-by: John Stultz <jstultz@google.com> Link: https://patch.msgid.link/20260404102244.GB22575@noisy.programming.kicks-ass.net
thermal: core: Suspend thermal zones later and resume them earlier
To avoid some undesirable interactions between thermal zone suspend
and resume with user space that is running when those operations are
carried out, move them closer to the suspend and resume of devices,
respectively, by updating dpm_prepare() to carry out thermal zone
suspend and dpm_complete() to start thermal zone resume (that will
continue asynchronously).
This also makes the code easier to follow by removing one, arguably
redundant, level of indirection represented by the thermal PM notifier.
Define thermal_class as a static structure to simplify thermal_init()
and to simplify thermal class availability checks that will need to
be carried out during the suspend and resume of thermal zones after
subsequent changes.
thermal: core: Drop redundant check from thermal_zone_device_update()
Since __thermal_zone_device_update() checks if tz->state is
TZ_STATE_READY and bails out immediately otherwise, it is not
necessary to check the thermal_zone_is_present() return value in
thermal_zone_device_update(). Namely, tz->state is equal to
TZ_STATE_FLAG_INIT initially and that flag is only cleared in
thermal_zone_init_complete() after adding tz to the list of thermal
zones, and thermal_zone_exit() sets TZ_STATE_FLAG_EXIT in tz->state
while removing tz from that list. Thus tz->state is not TZ_STATE_READY
when tz is not in the list and the check mentioned above is redundant.
Accordingly, drop the redundant thermal_zone_is_present() check from
thermal_zone_device_update() and drop the former altogether because it
has no more users.
thermal: core: Free thermal zone ID later during removal
The thermal zone removal ordering is different from the thermal zone
registration rollback path ordering and the former is arguably
problematic because freeing a thermal zone ID prematurely may cause
it to be used during the registration of another thermal zone which
may fail as a result.
Prevent that from occurring by changing the thermal zone removal
ordering to reflect the thermal zone registration rollback path
ordering.
Also more the ida_destroy() call from thermal_zone_device_unregister()
to thermal_release() for consistency.
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration.
Fixes: e33df1d2f3a0 ("thermal: let governors have private data for each thermal zone") Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/5092923.31r3eYUQgx@rafael.j.wysocki
Alessio Belle [Mon, 30 Mar 2026 07:56:40 +0000 (08:56 +0100)]
drm/imagination: Rename fence returned by pvr_queue_job_arm()
Rename from done_fence to finished_fence, both because the function
returns a drm_sched_fence's finished fence, and to avoid confusion with
the job fence, which is called the same but has a different purpose.
Alessio Belle [Mon, 30 Mar 2026 07:56:39 +0000 (08:56 +0100)]
drm/imagination: Rename pvr_queue_fence_is_ufo_backed() to reflect usage
This function is only used by the synchronization code to figure out if
a fence belongs to this driver.
Rename it to pvr_queue_fence_is_native() and update its documentation to
reflect its current purpose.
Alessio Belle [Mon, 30 Mar 2026 07:56:38 +0000 (08:56 +0100)]
drm/imagination: Skip check on paired job fence during job submission
While submitting a paired fragment job, there is no need to manually
look for, and skip, the paired job fence, as the existing logic to
resolve dependencies to pvr_queue_fence objects will have failed to
resolve it already and continued with the next one.
Point this out where the fence is actually accessed and drop the related
check.
Alessio Belle [Mon, 30 Mar 2026 07:56:37 +0000 (08:56 +0100)]
drm/imagination: Fit paired fragment job in the correct CCCB
For geometry jobs with a paired fragment job, at the moment, the
DRM scheduler's prepare_job() callback:
- checks for internal (driver) dependencies for the geometry job;
- calls into pvr_queue_get_paired_frag_job_dep() to check for external
dependencies for the fragment job (the two jobs are submitted together
but the common scheduler code doesn't know about it, so this needs to
be done at this point in time);
- calls into the prepare_job() callback again, but for the fragment job,
to check its internal dependencies as well, passing the fragment job's
drm_sched_job and the geometry job's drm_sched_entity / pvr_queue.
The problem with the last step is that pvr_queue_prepare_job() doesn't
always take the mismatched fragment job and geometry queue into account,
in particular when checking whether there is space for the fragment
command to be submitted, so the code ends up checking for space in the
geometry (i.e. wrong) CCCB.
The rest of the nested prepare_job() callback happens to work fine at
the moment as the other internal dependencies are not relevant for a
paired fragment job.
Move the initialisation of a paired fragment job's done fence and CCCB
fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct
queue from the fragment job itself.
This fixes cases where prepare_job() wrongly assumed that there was
enough space for a paired fragment job in its own CCCB, unblocking
run_job(), which then returned early without writing the full sequence
of commands to the CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
Alessio Belle [Mon, 30 Mar 2026 07:56:36 +0000 (08:56 +0100)]
drm/imagination: Count paired job fence as dependency in prepare_job()
The DRM scheduler's prepare_job() callback counts the remaining
non-signaled native dependencies for a job, preventing job submission
until those (plus job data and fence update) can fit in the job queue's
CCCB.
This means checking which dependencies can be waited upon in the
firmware, i.e. whether they are backed by a UFO object, i.e. whether
their drm_sched_fence::parent has been assigned to a
pvr_queue_fence::base fence. That happens when the job owning the fence
is submitted to the firmware.
Paired geometry and fragment jobs are submitted at the same time, which
means the dependency between them can't be checked this way before
submission.
Update job_count_remaining_native_deps() to take into account the
dependency between paired jobs.
This fixes cases where prepare_job() underestimated the space left in
an almost full fragment CCCB, wrongly unblocking run_job(), which then
returned early without writing the full sequence of commands to the
CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
pmdomain: qcom: rpmhpd: Add power domains for Hawi SoC
Add the RPMh power domains required for the Hawi SoC. This includes
new definitions for domains supplying specific hardware components:
- DCX: supplies VDD_DISP
- GBX: supplies VDD_GFX_BX
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the immutable branch dt into next, to allow the updated DT bindings
to be tested together with the pmdomain changes that are targeted for the
next release.
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Hawi SoC
Document the RPMh power domain for Hawi SoC, and add definitions for
the new power domains which present in Hawi SoC:
- RPMHPD_DCX (Display Core X): supplies VDD_DISP for the display
subsystem
- RPMHPD_GBX (Graphics Box): supplies VDD_GFX_BX for the GPU/graphics
subsystem
Also, add constants for new power domain levels that supported in Hawi
SoC, including: LOW_SVS_D3_0, LOW_SVS_D1_0, LOW_SVS_D0_0, SVS_L2_0,
TURBO_L1_0/1/2, TURBO_L1_0/1/2.
Mark Rutland [Tue, 7 Apr 2026 13:16:45 +0000 (14:16 +0100)]
entry: Split preemption from irqentry_exit_to_kernel_mode()
Some architecture-specific work needs to be performed between the state
management for exception entry/exit and the "real" work to handle the
exception. For example, arm64 needs to manipulate a number of exception
masking bits, with different exceptions requiring different masking.
Generally this can all be hidden in the architecture code, but for arm64
the current structure of irqentry_exit_to_kernel_mode() makes this
particularly difficult to handle in a way that is correct, maintainable,
and efficient.
The gory details are described in the thread surrounding:
* Currently, irqentry_exit_to_kernel_mode() handles both involuntary
preemption AND state management necessary for exception return.
* When scheduling (including involuntary preemption), arm64 needs to
have all arm64-specific exceptions unmasked, though regular interrupts
must be masked.
* Prior to the state management for exception return, arm64 needs to
mask a number of arm64-specific exceptions, and perform some work with
these exceptions masked (with RCU watching, etc).
While in theory it is possible to handle this with a new arch_*() hook
called somewhere under irqentry_exit_to_kernel_mode(), this is fragile
and complicated, and doesn't match the flow used for exception return to
user mode, which has a separate 'prepare' step (where preemption can
occur) prior to the state management.
To solve this, refactor irqentry_exit_to_kernel_mode() to match the
style of {irqentry,syscall}_exit_to_user_mode(), moving preemption logic
into a new irqentry_exit_to_kernel_mode_preempt() function, and moving
state management in a new irqentry_exit_to_kernel_mode_after_preempt()
function. The existing irqentry_exit_to_kernel_mode() is left as a
caller of both of these, avoiding the need to modify existing callers.
There should be no functional change as a result of this change.
[ tglx: Updated kernel doc ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260407131650.3813777-6-mark.rutland@arm.com
Mark Rutland [Tue, 7 Apr 2026 13:16:44 +0000 (14:16 +0100)]
entry: Split kernel mode logic from irqentry_{enter,exit}()
The generic irqentry code has entry/exit functions specifically for
exceptions taken from user mode, but doesn't have entry/exit functions
specifically for exceptions taken from kernel mode.
It would be helpful to have separate entry/exit functions specifically
for exceptions taken from kernel mode. This would make the structure of
the entry code more consistent, and would make it easier for
architectures to manage logic specific to exceptions taken from kernel
mode.
Move the logic specific to kernel mode out of irqentry_enter() and
irqentry_exit() into new irqentry_enter_from_kernel_mode() and
irqentry_exit_to_kernel_mode() functions. These are marked
__always_inline and placed in irq-entry-common.h, as with
irqentry_enter_from_user_mode() and irqentry_exit_to_user_mode(), so
that they can be inlined into architecture-specific wrappers. The
existing out-of-line irqentry_enter() and irqentry_exit() functions
retained as callers of the new functions.
The lockdep assertion from irqentry_exit() is moved into
irqentry_exit_to_user_mode() and irqentry_exit_to_kernel_mode(). This
was previously missing from irqentry_exit_to_user_mode() when called
directly, and any new lockdep assertion failure relating from this
change is a latent bug.
Aside from the lockdep change noted above, there should be no functional
change as a result of this change.
[ tglx: Updated kernel doc ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260407131650.3813777-5-mark.rutland@arm.com
Mark Rutland [Tue, 7 Apr 2026 13:16:43 +0000 (14:16 +0100)]
entry: Move irqentry_enter() prototype later
Subsequent patches will rework the irqentry_*() functions. The end
result (and the intermediate diffs) will be much clearer if the
prototype for the irqentry_enter() function is moved later, immediately
before the prototype of the irqentry_exit() function.
Move the prototype later.
This is purely a move; there should be no functional change as a result
of this change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260407131650.3813777-4-mark.rutland@arm.com
local_irq_enable_exit_to_user() and local_irq_disable_exit_to_user() are
never overridden by architecture code, and are always equivalent to
local_irq_enable() and local_irq_disable().
These functions were added on the assumption that arm64 would override
them to manage 'DAIF' exception masking, as described by Thomas Gleixner
in these threads:
In practice arm64 did not need to override either. Prior to moving to
the generic irqentry code, arm64's management of DAIF was reworked in
commit:
97d935faacde ("arm64: Unmask Debug + SError in do_notify_resume()")
Since that commit, arm64 only masks interrupts during the 'prepare' step
when returning to user mode, and masks other DAIF exceptions later.
Within arm64_exit_to_user_mode(), the arm64 entry code is as follows:
projects / thirdparty / linux.git / log
