trace_trigger= tokenizes bootup_trigger_buf in place and stores pointers
into that buffer for later trigger registration. Repeated trace_trigger=
parameters overwrite the buffer contents from earlier calls, leaving
only the last set of parsed event and trigger strings.
Keep each new trace_trigger= string at the end of bootup_trigger_buf and
parse only the appended range. That preserves the earlier event and
trigger strings while still letting repeated parameters queue additional
boot-time triggers.
This also lets Bootconfig array values work naturally when they expand
to repeated trace_trigger= entries.
Before this change, only the last trace_trigger= instance survived boot.
Some tracing boot parameters already accept delimited value lists, but
their __setup() handlers keep only the last instance seen at boot.
Make repeated instances append to the same boot-time buffer in the
format each parser already consumes.
Use a shared trace_append_boot_param() helper for the ftrace filters,
trace_options, and kprobe_event boot parameters.
This also lets Bootconfig array values work naturally when they expand
to repeated param=value entries.
Before this change, only the last instance from each repeated
parameter survived boot.
nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()
nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks
by comparing it with the current block number bd_blocknr. If they differ,
the block is considered dead and skipped.
However, bd_oblocknr should never be 0 since block 0 typically stores the
primary superblock and is never a valid GC target block. A corrupted ioctl
request with bd_oblocknr set to 0 causes the comparison to incorrectly
match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing
the dead block check and calling nilfs_bmap_mark() on a non-existent
block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering
the WARN_ON(ret == -ENOENT).
Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the
beginning of each iteration.
[ryusuke: slightly modified the commit message and comments for accuracy]
Linus Torvalds [Tue, 31 Mar 2026 17:28:08 +0000 (10:28 -0700)]
Merge tag 'fs_for_v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf fix from Jan Kara:
"Fix for a race in UDF that can lead to memory corruption"
* tag 'fs_for_v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix race between file type conversion and writeback
mpage: Provide variant of mpage_writepages() with own optional folio handler
Rosen Penev [Fri, 27 Mar 2026 02:48:28 +0000 (19:48 -0700)]
EDAC/mc: Use kzalloc_flex()
Convert struct mem_ctl_info to use flex array and use the new flex array
helpers to enable runtime bounds checking, including annotating the array
length member with __counted_by() for extra runtime analysis when requested.
Move memcpy() after the counter assignment so that it is initialized before
the first reference to the flex array, as the new attribute requires.
Pavan Chebbi [Sat, 14 Mar 2026 15:16:04 +0000 (08:16 -0700)]
fwctl/bnxt_fwctl: Add bnxt fwctl device
Create bnxt_fwctl device. This will bind to bnxt's aux device.
On the upper edge, it will register with the fwctl subsystem.
It will make use of bnxt's ULP functions to send FW commands.
Biju Das [Sat, 28 Mar 2026 10:33:18 +0000 (10:33 +0000)]
irqchip/renesas-rzg2l: Clear the shared interrupt bit in rzg2l_irqc_free()
rzg2l_irqc_free() invokes irq_domain_free_irqs_common(), which internally
calls irq_domain_reset_irq_data(). That explicitly sets irq_data->hwirq to
0. Consequently, irqd_to_hwirq(d) returns 0 when called after it.
Since 0 falls outside the valid shared IRQ ranges,
rzg2l_irqc_is_shared_and_get_irq_num() evaluates to false, completely
bypassing the test_and_clear_bit() operation.
This leaves the bit set in priv->used_irqs, causing future allocations to
fail with -EBUSY.
Fix this by retrieving irq_data and caching hwirq before calling
irq_domain_free_irqs_common().
platform/x86: toshiba_haps: Convert ACPI driver to a platform one
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Toshiba HDD Active Protection Sensor
driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Note that the sysfs attributes in haps_attr_group will still be there
in the sysfs directory of the ACPI companion of the platform device
used for driver binding in case there are tools in user space expecting
them to be present there.
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/10834562.nUPlyArG6x@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: toshiba_bluetooth: Convert ACPI driver to a platform one
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Toshiba Bluetooth Enable driver from an
ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/3048289.e9J7NaK4W3@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: toshiba_acpi: Convert ACPI driver to a platform one
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Toshiba Laptop ACPI Extras driver from
an ACPI driver to a platform one.
After this change, all of the subordinate hwmon, IIO, and LED class
devices will be registered under the platform device used for driver
binding instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
However, the sysfs attributes in toshiba_attr_group will still be there
in the sysfs directory of the ACPI companion of the platform device used
for driver binding to maintain backwards compatibility with possibly
existing user space utilities depending on the presence of those
attributes.
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/5070377.GXAFRqVoOG@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
platform/x86: toshiba_acpi: Reorder code to avoid forward declaration
Move the definition of toshiba_acpi_notify() before the definitions of
the functions that will refer to it after subsequent updates to avoid
having to add a forward declarations of it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4734258.LvFx2qVVIh@rafael.j.wysocki Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
iommufd/selftest: Remove MOCK_IOMMUPT_AMDV1 format
syzbot found that allocating a mock domain with AMDV1 format could
cause a WARN_ON because the selftest enabled DYNAMIC_TOP without
providing the required driver_ops.
The AMDV1 format in the selftest was a placeholder and was not actually
used by any of the existing selftests. Instead of adding dummy
driver_ops to satisfy the requirements of a format we don't currently
test, remove the AMDV1 format option from the selftest.
The MOCK_IOMMUPT_DEFAULT and MOCK_IOMMUPT_HUGE formats are unaffected as
they use the amdv1_mock variant which does not enable DYNAMIC_TOP.
Zhenzhong Duan [Mon, 30 Mar 2026 03:07:55 +0000 (23:07 -0400)]
iommufd: Fix return value of iommufd_fault_fops_write()
copy_from_user() may return number of bytes failed to copy, we should
not pass over this number to user space to cheat that write() succeed.
Instead, -EFAULT should be returned.
Ethan Tidmore [Tue, 24 Mar 2026 17:38:30 +0000 (12:38 -0500)]
ASoC: SOF: Intel: hda: Place check before dereference
The struct hext_stream is dereferenced before it is checked for NULL.
Although it can never be NULL due to a check prior to
hda_dsp_iccmax_stream_hw_params() being called, this change clears any
confusion regarding hext_stream possibly being NULL.
Check hext_stream for NULL and then assign its members.
Detected by Smatch:
sound/soc/sof/intel/hda-stream.c:488 hda_dsp_iccmax_stream_hw_params() warn:
variable dereferenced before check 'hext_stream' (see line 486)
Haoyu Lu [Tue, 31 Mar 2026 09:53:51 +0000 (17:53 +0800)]
mtd: spi-nor: micron-st: Enable die erase support for MT35XU02GCBA
The MT35XU02GCBA flash device does not support chip erase according
to its datasheet, but supports die erase. The existing code had a TODO
comment noting that the SPI_NOR_IO_MODE_EN_VOLATILE flag probably needs
to be enabled and the driver implementation needs to be converted to
use die erase.
This patch enables the SPI_NOR_IO_MODE_EN_VOLATILE flag and adds the
mt35_two_die_fixups to the MT35XU02GCBA entry, which includes the
micron_st_nor_two_die_late_init() function that sets up die erase
support.
With these changes, the flash device can properly use die erase
operations instead of chip erase.
Signed-off-by: Haoyu Lu <hechushiguitu666@gmail.com> Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
[pratyush@kernel.org: drop the whole comment instead of just the TODO line] Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Xu Yang [Mon, 30 Mar 2026 06:35:18 +0000 (14:35 +0800)]
dt-bindings: connector: add pd-disable dependency
When Power Delivery is not supported, the source is unable to obtain the
current capability from the Source PDO. As a result, typec-power-opmode
needs to be added to advertise such capability.
platform/x86/intel/tpmi: Use 32 bit aligned address for debugfs mem write
The memory write feature supports 32-bit writes to any TPMI offset.
However, future hardware generations may not allow writes to non-32-bit
aligned addresses due to hardware optimizations.
Since all TPMI addresses are 64-bit aligned and correspond to 64-bit
registers, enforce 32-bit alignment for write operations.
Loïc Grégoire [Sat, 28 Mar 2026 02:18:54 +0000 (22:18 -0400)]
printk: ringbuffer: fix errors in comments
The printk ringbuffer implementation is described in the comment as
using three ringbuffers, but the current implementation uses two (desc
and data). Update the comment so it matches the code.
Fix few more known issues in the comments.
Signed-off-by: Loïc Grégoire <loicgre@gmail.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://patch.msgid.link/20260328021855.53956-1-loicgre@gmail.com
[pmladek@suse.com: Fixed few more issues in the comments by John Ogness.] Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
Conor Dooley [Tue, 10 Feb 2026 10:51:17 +0000 (10:51 +0000)]
riscv: dts: microchip: update mpfs gpio interrupts to better match the SoC
There are 3 GPIO controllers on this SoC, of which:
- GPIO controller 0 has 14 GPIOs
- GPIO controller 1 has 24 GPIOs
- GPIO controller 2 has 32 GPIOs
All GPIOs are capable of generating interrupts, for a total of 70.
There are only 41 IRQs available however, so a configurable mux is used
to ensure all GPIOs can be used for interrupt generation.
38 of the 41 interrupts are in what the documentation calls "direct
mode", as they provide an exclusive connection from a GPIO to the PLIC.
The 3 remaining interrupts are used to mux the interrupts which do not
have a exclusive connection, one for each GPIO controller.
The mux was overlooked when the bindings and driver were originally
written for the GPIO controllers on Polarfire SoC, and the interrupts
property in the GPIO nodes used to try and convey what the mapping was.
Instead, the mux should be a device in its own right, and the GPIO
controllers should be connected to it, rather than to the PLIC.
Now that a binding exists for that mux, fix the inaccurate description
of the interrupt controller hierarchy.
GPIO controllers 0 and 1 do not have all 32 possible GPIO lines, so
ngpios needs to be set to match the number of lines/interrupts.
The m100pfsevp has conflicting interrupt mappings for controllers 0 and
2, as they cannot both be using an interrupt in "direct mode" at the
same time, so the default replaces this impossible configuration.
rv/rvgen: use context managers for file operations
Replace manual file open and close operations with context managers
throughout the rvgen codebase. The previous implementation used
explicit open() and close() calls, which could lead to resource leaks
if exceptions occurred between opening and closing the file handles.
This change affects three file operations: reading DOT specification
files in the automata parser, reading template files in the generator
base class, and writing generated monitor files. All now use the with
statement to ensure proper resource cleanup even in error conditions.
Context managers provide automatic cleanup through the with statement,
which guarantees that file handles are closed when the with block
exits regardless of whether an exception occurred. This follows PEP
343 recommendations and is the standard Python idiom for resource
management. The change also reduces code verbosity while improving
safety and maintainability.
Signed-off-by: Wander Lairson Costa <wander@redhat.com> Reviewed-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/r/20260223162407.147003-7-wander@redhat.com Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Remove unnecessary semicolons from Python code in the rvgen tool.
Python does not require semicolons to terminate statements, and
their presence goes against PEP 8 style guidelines. These semicolons
were likely added out of habit from C-style languages.
This cleanup improves consistency with Python coding standards and
aligns with the recent improvements to remove other Python
anti-patterns from the codebase.
Signed-off-by: Wander Lairson Costa <wander@redhat.com> Reviewed-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/r/20260223162407.147003-6-wander@redhat.com Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Replace all direct calls to the __len__() dunder method with the
idiomatic len() built-in function across the rvgen codebase. This
change eliminates a Python anti-pattern where dunder methods are
called directly instead of using their corresponding built-in
functions.
The changes affect nine instances across two files. In automata.py,
the empty string check is further improved by using truthiness
testing instead of explicit length comparison. In dot2c.py, all
length checks in the get_minimun_type, __get_max_strlen_of_states,
and get_aut_init_function methods now use the standard len()
function. Additionally, spacing around keyword arguments has been
corrected to follow PEP 8 guidelines.
Direct calls to dunder methods like __len__() are discouraged in
Python because they bypass the language's abstraction layer and
reduce code readability. Using len() provides the same functionality
while adhering to Python community standards and making the code more
familiar to Python developers.
Signed-off-by: Wander Lairson Costa <wander@redhat.com> Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Reviewed-by: Nam Cao <namcao@linutronix.de> Link: https://lore.kernel.org/r/20260223162407.147003-5-wander@redhat.com Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
rv/rvgen: replace % string formatting with f-strings
Replace all instances of percent-style string formatting with
f-strings across the rvgen codebase. This modernizes the string
formatting to use Python 3.6+ features, providing clearer and more
maintainable code while improving runtime performance.
The conversion handles all formatting cases including simple variable
substitution, multi-variable formatting, and complex format specifiers.
Dynamic width formatting is converted from "%*s" to "{var:>{width}}"
using proper alignment syntax. Template strings for generated C code
properly escape braces using double-brace syntax to produce literal
braces in the output.
F-strings provide approximately 2x performance improvement over percent
formatting and are the recommended approach in modern Python.
Signed-off-by: Wander Lairson Costa <wander@redhat.com> Reviewed-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/r/20260223162407.147003-4-wander@redhat.com Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Remove bare except clauses from the generator module that were
catching all exceptions including KeyboardInterrupt and SystemExit.
This follows the same exception handling improvements made in the
previous AutomataError commit and addresses PEP 8 violations.
The bare except clause in __create_directory was silently catching
and ignoring all errors after printing a message, which could mask
serious issues. For __write_file, the bare except created a critical
bug where the file variable could remain undefined if open() failed,
causing a NameError when attempting to write to or close the file.
These methods now let OSError propagate naturally, allowing callers
to handle file system errors appropriately. This provides clearer
error reporting and allows Python's exception handling to show
complete stack traces with proper error types and locations.
Signed-off-by: Wander Lairson Costa <wander@redhat.com> Reviewed-by: Nam Cao <namcao@linutronix.de> Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/r/20260223162407.147003-3-wander@redhat.com Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Replace the generic except Exception block with a custom AutomataError
class that inherits from Exception. This provides more precise exception
handling for automata parsing and validation errors while avoiding
overly broad exception catches that could mask programming errors like
SyntaxError or TypeError.
The AutomataError class is raised when DOT file processing fails due to
invalid format, I/O errors, or malformed automaton definitions. The
main entry point catches this specific exception and provides a
user-friendly error message to stderr before exiting.
Also, replace generic exceptions raising in HA and LTL with
AutomataError.
Gabriele Monaco [Mon, 30 Mar 2026 11:10:08 +0000 (13:10 +0200)]
sched: Add deadline tracepoints
Add the following tracepoints:
* sched_dl_throttle(dl_se, cpu, type):
Called when a deadline entity is throttled
* sched_dl_replenish(dl_se, cpu, type):
Called when a deadline entity's runtime is replenished
* sched_dl_update(dl_se, cpu, type):
Called when a deadline entity updates without throttle or replenish
* sched_dl_server_start(dl_se, cpu, type):
Called when a deadline server is started
* sched_dl_server_stop(dl_se, cpu, type):
Called when a deadline server is stopped
Those tracepoints can be useful to validate the deadline scheduler with
RV and are not exported to tracefs.
Gabriele Monaco [Mon, 30 Mar 2026 11:10:06 +0000 (13:10 +0200)]
rv: Add support for per-object monitors in DA/HA
RV deterministic and hybrid automata currently only support global,
per-cpu and per-task monitors. It isn't possible to write a model that
would follow some different type of object, like a deadline entity or a
lock.
Define the generic per-object monitor implementation which shares part
of the implementation with the per-task monitors.
The user needs to provide an id for the object (e.g. pid for tasks) and
define the data type for the monitor_target (e.g. struct task_struct *
for tasks). Both are supplied to the event handlers, as the id may not
be easily available in the target.
The monitor storage (e.g. the rv monitor, pointer to the target, etc.)
is stored in a hash table indexed by id. Monitor storage objects are
automatically allocated unless specified otherwise (e.g. if the creation
context is unsafe for allocation).
Gabriele Monaco [Mon, 30 Mar 2026 11:10:05 +0000 (13:10 +0200)]
rv: Convert the opid monitor to a hybrid automaton
The opid monitor validates that wakeup and need_resched events only
occur with interrupts and preemption disabled by following the
preemptirq tracepoints.
As reported in [1], those tracepoints might be inaccurate in some
situations (e.g. NMIs).
Since the monitor doesn't validate other ordering properties, remove the
dependency on preemptirq tracepoints and convert the monitor to a hybrid
automaton to validate the constraint during event handling.
This makes the monitor more robust by also removing the workaround for
interrupts missing the preemption tracepoints, which was working on
PREEMPT_RT only and allows the monitor to be built on kernels without
the preemptirqs tracepoints.
Gabriele Monaco [Mon, 30 Mar 2026 11:10:04 +0000 (13:10 +0200)]
rv: Add sample hybrid monitor stall
Add a sample monitor to showcase hybrid/timed automata.
The stall monitor identifies tasks stalled for longer than a threshold
and reacts when that happens.
Gabriele Monaco [Mon, 30 Mar 2026 11:10:03 +0000 (13:10 +0200)]
Documentation/rv: Add documentation about hybrid automata
Describe theory and implementation of hybrid automata in the dedicated
page hybrid_automata.rst
Include a section on how to integrate a hybrid automaton in
monitor_synthesis.rst
Also remove a hanging $ in deterministic_automata.rst
Gabriele Monaco [Mon, 30 Mar 2026 11:10:02 +0000 (13:10 +0200)]
verification/rvgen: Add support for Hybrid Automata
Add the possibility to parse dot files as hybrid automata and generate
the necessary code from rvgen.
Hybrid automata are very similar to deterministic ones and most
functionality is shared, the dot files include also constraints together
with event names (separated by ;) and state names (separated by \n).
The tool can now generate the appropriate code to validate constraints
at runtime according to the dot specification.
Gabriele Monaco [Mon, 30 Mar 2026 11:10:01 +0000 (13:10 +0200)]
verification/rvgen: Allow spaces in and events strings
Currently the automata parser assumes event strings don't have any
space, this stands true for event names, but can be a wrong assumption
if we want to store other information in the event strings (e.g.
constraints for hybrid automata).
Adapt the parser logic to allow spaces in the event strings.
Gabriele Monaco [Mon, 30 Mar 2026 11:10:00 +0000 (13:10 +0200)]
rv: Add Hybrid Automata monitor type
Deterministic automata define which events are allowed in every state,
but cannot define more sophisticated constraint taking into account the
system's environment (e.g. time or other states not producing events).
Add the Hybrid Automata monitor type as an extension of Deterministic
automata where each state transition is validating a constraint on a
finite number of environment variables.
Hybrid automata can be used to implement timed automata, where the
environment variables are clocks.
Also implement the necessary functionality to handle clock constraints
(ns or jiffy granularity) on state and events.
Gabriele Monaco [Mon, 30 Mar 2026 11:09:59 +0000 (13:09 +0200)]
rv: Unify DA event handling functions across monitor types
The DA event handling functions are mostly duplicated because the
per-task monitors need to propagate the task struct while others do not.
Unify the functions, handle the difference by always passing an
identifier which is the task's pid for per-task monitors but is ignored
for the other types. Only keep the actual tracepoint calling separated.
drivers/video/fbdev/aty/atyfb_base.c:2327:24: warning: variable 'fb_list' set but not used [-Wunused-but-set-global]
2327 | static struct fb_info *fb_list = NULL;
Indeed, the last user of fb_list was removed in 2004, while the actual
linked list was removed in 2002.
Damien Le Moal [Thu, 26 Mar 2026 20:32:45 +0000 (05:32 +0900)]
zloop: add max_open_zones option
Introduce the new max_open_zones option to allow specifying a limit on
the maximum number of open zones of a zloop device. This change allows
creating a zloop device that can more closely mimick the characteristics
of a physical SMR drive.
When set to a non zero value, only up to max_open_zones zones can be in
the implicit open (BLK_ZONE_COND_IMP_OPEN) and explicit open
(BLK_ZONE_COND_EXP_OPEN) conditions at any time. The transition to the
implicit open condition of a zone on a write operation can result in an
implicit close of an already implicitly open zone. This is handled in
the function zloop_do_open_zone(). This function also handles
transitions to the explicit open condition. Implicit close transitions
are handled using an LRU ordered list of open zones which is managed
using the helper functions zloop_lru_rotate_open_zone() and
zloop_lru_remove_open_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20260326203245.946830-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unbeknownst to me, and unremarked upon by the checkpatch maintainer, this
same problem was also solved in the mm tree. Fixing it once is enough, so
this one comes out.
Werner Sembach [Tue, 24 Mar 2026 20:32:11 +0000 (21:32 +0100)]
platform/x86: uniwill-laptop: Apply features across all TUXEDO devices
Uses the more fine granular and/or new feature defines to enable more
features across the TUXEDO device lineup.
Also adds features to TUXEDO devices that where already present in the
driver, but not tested until now.
Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://patch.msgid.link/20260324203413.454361-5-wse@tuxedocomputers.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add alternative XMG Fusion system vendor name and clarify edition in ident.
Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://patch.msgid.link/20260324203413.454361-4-wse@tuxedocomputers.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Werner Sembach [Tue, 24 Mar 2026 20:32:09 +0000 (21:32 +0100)]
platform/x86: uniwill-laptop: Implement USB-C power priority setting
On some devices Uniwill offers the option to set the USB-C port to
prioritise charging or performance. This patch exposes this setting to the
userspace via sysfs for all TUXEDO devices supporting it.
Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://patch.msgid.link/20260324203413.454361-3-wse@tuxedocomputers.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Split hwmon feature define in smaller parts to accommodate for diverse
hardware. You can now specify the presence of a cpu and/or a gpu temp
sensor separately and if one or 2 fans exists.
Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Werner Sembach <wse@tuxedocomputers.com> Tested-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Link: https://patch.msgid.link/20260324203413.454361-2-wse@tuxedocomputers.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14IMH9
The Lenovo Yoga Pro 7 14IMH9 (DMI: 83E2) shares PCI SSID 17aa:3847
with the Legion 7 16ACHG6, but has a different codec subsystem ID
(17aa:38cf). The existing SND_PCI_QUIRK for 17aa:3847 applies
ALC287_FIXUP_LEGION_16ACHG6, which attempts to initialize an external
I2C amplifier (CLSA0100) that is not present on the Yoga Pro 7 14IMH9.
As a result, pin 0x17 (bass speakers) is connected to DAC 0x06 which
has no volume control, making hardware volume adjustment completely
non-functional. Audio is either silent or at maximum volume regardless
of the slider position.
Add a HDA_CODEC_QUIRK entry using the codec subsystem ID (17aa:38cf)
to correctly identify the Yoga Pro 7 14IMH9 and apply
ALC287_FIXUP_YOGA9_14IMH9_BASS_SPK_PIN, which redirects pin 0x17 to
DAC 0x02 and restores proper volume control. The existing Legion entry
is preserved unchanged.
This follows the same pattern used for 17aa:386e, where Legion Y9000X
and Yoga Pro 7 14ARP8 share a PCI SSID but are distinguished via
HDA_CODEC_QUIRK.
Xiang Mei [Sat, 28 Mar 2026 06:30:00 +0000 (23:30 -0700)]
bridge: mrp: reject zero test interval to avoid OOM panic
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes.
Fixes: 20f6a05ef635 ("bridge: mrp: Rework the MRP netlink interface") Fixes: 7ab1748e4ce6 ("bridge: mrp: Extend MRP netlink interface for configuring MRP interconnect") Reported-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Xiang Mei <xmei5@asu.edu> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260328063000.1845376-1-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alexander Duyck [Fri, 27 Mar 2026 20:44:45 +0000 (13:44 -0700)]
fbnic: Set Relaxed Ordering PCIe TLP attributes for DMA engines
Add ATTR CSR bit field definitions for the DMA engine TLP header
configuration registers:
AW_CFG: RDE_ATTR[17:15], RQM_ATTR[14:12], TQM_ATTR[11:9]
AR_CFG: TDE_ATTR[17:15], RQM_ATTR[14:12], TQM_ATTR[11:9]
These fields control the PCIe TLP attribute bits for outbound
transactions from the TQM, RQM, RDE (write path), and TDE (read path)
DMA engines. An enum is added with standard PCIe TLP attribute values:
NS (No Snoop), RO (Relaxed Ordering), and IDO (ID-based Ordering).
Read the PCIe Relaxed Ordering capability at probe time and store it in
fbnic_dev. Configure Relaxed Ordering on the PCIe TLP attributes in
fbnic_mbx_init_desc_ring when the capability is enabled. For the write
path (AW_CFG), set RO on RDE and TQM attributes. For the read path
(AR_CFG), set RO on all three attributes (TDE, RQM, TQM). This allows
the PCIe fabric to reorder these transactions for improved throughput.
David Timber [Mon, 16 Mar 2026 21:41:37 +0000 (06:41 +0900)]
exfat: fix s_maxbytes
With fallocate support, xfstest unit generic/213 fails with
QA output created by 213
We should get: fallocate: No space left on device
Strangely, xfs_io sometimes says "Success" when something went wrong
-fallocate: No space left on device
+fallocate: File too large
because sb->s_maxbytes is set to the volume size.
To be in line with other non-extent-based filesystems, set to max volume
size possible with the cluster size of the volume.
Signed-off-by: David Timber <dxdt@dev.snart.me> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
snd_soc_unbind_card() calls snd_soc_flush_all_delayed_work() (A),
but it will be called in soc_cleanup_card_resources() (B).
It is duplicated, let's remove it.
(B) static void soc_cleanup_card_resources(...)
{
...
/* flush delayed work before removing DAIs and DAPM widgets */
(A)' snd_soc_flush_all_delayed_work(card);
...
}
static void snd_soc_unbind_card(...)
{
if (snd_soc_card_is_instantiated(card)) {
card->instantiated = false;
On PolarFire SoC there are more GPIO interrupts than there are interrupt
lines available on the PLIC, and a runtime configurable mux is used to
decide which interrupts are assigned direct connections to the PLIC &
which are relegated to sharing a line.
Add a driver so that Linux can set the mux based on the interrupt
mapping in the devicetree.
On PolarFire SoC there are more GPIO interrupts than there are interrupt
lines available on the PLIC, and a runtime configurable mux is used to
decide which interrupts are assigned direct connections to the PLIC &
which are relegated to sharing a line.
Conor Dooley [Wed, 18 Mar 2026 11:04:33 +0000 (11:04 +0000)]
gpio: mpfs: Add interrupt support
Add support for interrupts to the PolarFire SoC GPIO driver. Each GPIO
has an independent interrupt that is wired to an interrupt mux that sits
between the controllers and the PLIC. The SoC has more GPIO lines than
connections from the mux to the PLIC, so some GPIOs must share PLIC
interrupts. The configuration is not static and is set at runtime,
conventionally by the platform's firmware. CoreGPIO, the version
intended for use in the FPGA fabric has two interrupt output ports, one
is IO_NUM bits wide, as is used in the hardened cores, and the other is
a single bit with all lines ORed together.
Jackie Liu [Tue, 31 Mar 2026 11:12:16 +0000 (19:12 +0800)]
block: fix zones_cond memory leak on zone revalidation error paths
When blk_revalidate_disk_zones() fails after disk_revalidate_zone_resources()
has allocated args.zones_cond, the memory is leaked because no error path
frees it.
Fixes: 6e945ffb6555 ("block: use zone condition to determine conventional zones") Suggested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Link: https://patch.msgid.link/20260331111216.24242-1-liu.yun@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
Julian Braha [Wed, 25 Mar 2026 00:15:21 +0000 (00:15 +0000)]
ASoC: Intel: boards: fix unmet dependency on PINCTRL
This reverts commit c073f0757663 ("ASoC: Intel: sof_sdw: select PINCTRL_CS42L43 and SPI_CS42L43")
Currently, SND_SOC_INTEL_SOUNDWIRE_SOF_MACH selects PINCTRL_CS42L43
without also selecting or depending on PINCTRL, despite PINCTRL_CS42L43
depending on PINCTRL.
In response to v1 of this patch [1], Arnd pointed out that there is
no compile-time dependency sof_sdw and the PINCTRL_CS42L43 driver.
After testing, I can confirm that the kernel compiled with
SND_SOC_INTEL_SOUNDWIRE_SOF_MACH enabled and PINCTRL_CS42L43 disabled.
This unmet dependency was detected by kconfirm, a static analysis
tool for Kconfig.
Daan De Meyer [Tue, 31 Mar 2026 10:51:28 +0000 (10:51 +0000)]
loop: fix partition scan race between udev and loop_reread_partitions()
When LOOP_CONFIGURE is called with LO_FLAGS_PARTSCAN, the following
sequence occurs:
1. disk_force_media_change() sets GD_NEED_PART_SCAN
2. Uevent suppression is lifted and a KOBJ_CHANGE uevent is sent
3. loop_global_unlock() releases the lock
4. loop_reread_partitions() calls bdev_disk_changed() to scan
There is a race between steps 2 and 4: when udev receives the uevent
and opens the device before loop_reread_partitions() runs,
blkdev_get_whole() in bdev.c sees GD_NEED_PART_SCAN set and calls
bdev_disk_changed() for a first scan. Then loop_reread_partitions()
does a second scan. The open_mutex serializes these two scans, but
does not prevent both from running.
The second scan in bdev_disk_changed() drops all partition devices
from the first scan (via blk_drop_partitions()) before re-adding
them, causing partition block devices to briefly disappear. This
breaks any systemd unit with BindsTo= on the partition device: systemd
observes the device going dead, fails the dependent units, and does
not retry them when the device reappears.
Fix this by removing the GD_NEED_PART_SCAN set from
disk_force_media_change() entirely. None of the current callers need
the lazy on-open partition scan triggered by this flag:
- floppy: sets GENHD_FL_NO_PART, so disk_has_partscan() is always
false and GD_NEED_PART_SCAN has no effect.
- loop (loop_configure, loop_change_fd): when LO_FLAGS_PARTSCAN is
set, loop_reread_partitions() performs an explicit scan. When not
set, GD_SUPPRESS_PART_SCAN prevents the lazy scan path.
- loop (__loop_clr_fd): calls bdev_disk_changed() explicitly if
LO_FLAGS_PARTSCAN is set.
- nbd (nbd_clear_sock_ioctl): capacity is set to zero immediately
after; nbd manages GD_NEED_PART_SCAN explicitly elsewhere.
With GD_NEED_PART_SCAN no longer set by disk_force_media_change(),
udev opening the loop device after the uevent no longer triggers a
redundant scan in blkdev_get_whole(), and only the single explicit
scan from loop_reread_partitions() runs.
A regression test for this bug has been submitted to blktests:
https://github.com/linux-blktests/blktests/pull/240.
Milan Broz [Tue, 10 Mar 2026 09:53:49 +0000 (10:53 +0100)]
sed-opal: Add STACK_RESET command
The TCG Opal device could enter a state where no new session can be
created, blocking even Discovery or PSID reset. While a power cycle
or waiting for the timeout should work, there is another possibility
for recovery: using the Stack Reset command.
The Stack Reset command is defined in the TCG Storage Architecture Core
Specification and is mandatory for all Opal devices (see Section 3.3.6
of the Opal SSC specification).
This patch implements the Stack Reset command. Sending it should clear
all active sessions immediately, allowing subsequent commands to run
successfully. While it is a TCG transport layer command, the Linux
kernel implements only Opal ioctls, so it makes sense to use the
IOC_OPAL ioctl interface.
The Stack Reset takes no arguments; the response can be success or pending.
If the command reports a pending state, userspace can try to repeat it;
in this case, the code returns -EBUSY.
Denis Benato [Mon, 2 Mar 2026 17:44:31 +0000 (18:44 +0100)]
platform/x86: asus-wmi: fix screenpad brightness range
Fix screenpad brightness range being too limited without reason:
testing this patch on a Zenbook Duo showed the hardware minimum not being
too low, therefore allow the user to configure the entire range, and
expose to userspace the hardware brightness range and value.
Fixes: 2c97d3e55b70 ("platform/x86: asus-wmi: add support for ASUS screenpad") Signed-off-by: Denis Benato <denis.benato@linux.dev> Signed-off-by: Luke Jones <luke@ljones.dev> Link: https://patch.msgid.link/20260302174431.349816-3-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix illogical screen off control by hardcoding 0 and 1 depending on the
requested brightness and also do not rely on the last screenpad power
state to issue screen brightness commands.
misc/mei: INTEL_MEI should depend on X86 or DRM_XE
The Intel Management Engine Interface is only present on x86 platforms
and Intel Xe graphics cards. Hence add a dependency on X86 or DRM_XE,
to prevent asking the user about this driver when configuring a kernel
for a non-x86 architecture and without Xe graphics support.
After commit 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected")
some devices started to show long resume times (5-7 seconds).
This happens as mei falsely detects unready hardware,
starts parallel link reset flow and triggers link reset timeouts
in the resume callback.
Address it by performing detection of unready hardware only
when driver is in the MEI_DEV_ENABLED state instead of blacklisting
states as done in the original patch.
This eliminates active waitqueue check as in MEI_DEV_ENABLED state
there will be no active waitqueue.
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org> Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221023 Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Fixes: 2cedb296988c ("mei: me: trigger link reset if hw ready is unexpected") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Link: https://patch.msgid.link/20260330083830.536056-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alice Ryhl [Sat, 14 Mar 2026 11:19:51 +0000 (11:19 +0000)]
rust_binder: use AssertSync for BINDER_VM_OPS
When declaring an immutable global variable in Rust, the compiler checks
that it looks thread safe, because it is generally safe to access said
global variable. When using C bindings types for these globals, we don't
really want this check, because it is conservative and assumes pointers
are not thread safe.
In the case of BINDER_VM_OPS, this is a challenge when combined with the
patch 'userfaultfd: introduce vm_uffd_ops' [1], which introduces a
pointer field to vm_operations_struct. It previously only held function
pointers, which are considered thread safe.
Rust Binder should not be assuming that vm_operations_struct contains no
pointer fields, so to fix this, use AssertSync (which Rust Binder has
already declared for another similar global of type struct
file_operations with the same problem). This ensures that even if
another commit adds a pointer field to vm_operations_struct, this does
not cause problems.
Brian Mak [Wed, 25 Mar 2026 22:30:24 +0000 (15:30 -0700)]
mfd: core: Preserve OF node when ACPI handle is present
Switch device_set_node to set_primary_fwnode, so that the ACPI fwnode
does not overwrite the of_node with NULL.
This allows MFD children with both OF nodes and ACPI handles to have OF
nodes again.
Cc: stable@vger.kernel.org Fixes: 51e3b257099d ("mfd: core: Make use of device_set_node()") Signed-off-by: Brian Mak <makb@juniper.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20260325223024.35992-1-makb@juniper.net Signed-off-by: Lee Jones <lee@kernel.org>
thermal: core: Address thermal zone removal races with resume
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively.
Fixes: 5a5efdaffda5 ("thermal: core: Resume thermal zones asynchronously") Reported-by: syzbot+3b3852c6031d0f30dfaf@syzkaller.appspotmail.com Closes: https://syzbot.org/bug?extid=3b3852c6031d0f30dfaf Reported-by: Mauricio Faria de Oliveira <mfo@igalia.com> Closes: https://lore.kernel.org/linux-pm/20260324-thermal-core-uaf-init_delayed_work-v1-1-6611ae76a8a1@igalia.com/ [1] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mauricio Faria de Oliveira <mfo@igalia.com> Tested-by: Mauricio Faria de Oliveira <mfo@igalia.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/6267615.lOV4Wx5bFT@rafael.j.wysocki
Sachin Mokashi [Fri, 27 Mar 2026 13:14:39 +0000 (09:14 -0400)]
ASoC: Intel: ehl_rt5660: Use the correct rtd->dev device in hw_params
In rt5660_hw_params(), the error path for snd_soc_dai_set_sysclk()
correctly uses rtd->dev as the logging device, but the error path for
snd_soc_dai_set_pll() uses codec_dai->dev instead.
These two devices are distinct:
- rtd->dev is the platform device of the PCM runtime (the Intel HDA/SSP
controller, e.g. 0000:00:1f.3), which owns the machine driver callback.
- codec_dai->dev is the I2C device of the rt5660 codec itself
(i2c-10EC5660:00).
Since hw_params is a machine driver operation and both calls are made
within the same function from the machine driver's context, all error
messages should be attributed to rtd->dev. Using codec_dai->dev for one
of them would suggest the error originates inside the codec driver,
which is misleading.
Align the PLL error log with the sysclk one to use rtd->dev, matching
the convention used by all other Intel board drivers in this directory.
Maxime Ripard [Tue, 31 Mar 2026 10:00:14 +0000 (12:00 +0200)]
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
The CMA dma-buf heap uses cma_alloc() and cma_release() to allocate and
free, respectively, its CMA buffers, and cma_get_name() to get the name
of the heap instance it's going to create.
However, these functions are not exported. Since we want to turn the CMA
heap into a module, let's export them both.
Maxime Ripard [Tue, 31 Mar 2026 10:00:12 +0000 (12:00 +0200)]
dma: contiguous: Make dma_contiguous_default_area static
Now that dev_get_cma_area() is no longer inline, we don't have any user
of dma_contiguous_default_area() outside of contiguous.c so we can make
it static.
Maxime Ripard [Tue, 31 Mar 2026 10:00:11 +0000 (12:00 +0200)]
dma: contiguous: Make dev_get_cma_area() a proper function
As we try to enable dma-buf heaps, and the CMA one in particular, to
compile as modules, we need to export dev_get_cma_area(). It's currently
implemented as an inline function that returns either the content of
device->cma_area or dma_contiguous_default_area.
Thus, it means we need to export dma_contiguous_default_area, which
isn't really something we want any module to have access to.
Instead, let's make dev_get_cma_area() a proper function we will be able
to export so we can avoid exporting dma_contiguous_default_area.
Maxime Ripard [Tue, 31 Mar 2026 10:00:10 +0000 (12:00 +0200)]
dma: contiguous: Turn heap registration logic around
The CMA heap instantiation was initially developed by having the
contiguous DMA code call into the CMA heap to create a new instance
every time a reserved memory area is probed.
Turning the CMA heap into a module would create a dependency of the
kernel on a module, which doesn't work.
Let's turn the logic around and do the opposite: store all the reserved
memory CMA regions into the contiguous DMA code, and provide an iterator
for the heap to use when it probes.
Johan Hovold [Fri, 27 Mar 2026 10:52:08 +0000 (11:52 +0100)]
mmc: vub300: clean up module init
Clean up module init by dropping redundant error messages (e.g.
allocation and USB driver registration failure will already have been
logged) and naming error labels after what they do.
Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Tue, 31 Mar 2026 11:12:29 +0000 (13:12 +0200)]
mmc: Merge branch fixes into next
Merge the mmc fixes for v7.0-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Johan Hovold [Fri, 27 Mar 2026 10:52:06 +0000 (11:52 +0100)]
mmc: vub300: fix use-after-free on disconnect
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller.
Johan Hovold [Fri, 27 Mar 2026 10:52:05 +0000 (11:52 +0100)]
mmc: vub300: fix NULL-deref on disconnect
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Chen Ni [Wed, 11 Mar 2026 06:46:52 +0000 (14:46 +0800)]
drm/sysfb: Fix efidrm error handling and memory type mismatch
Fix incorrect error checking and memory type confusion in
efidrm_device_create(). devm_memremap() returns error pointers, not
NULL, and returns system memory while devm_ioremap() returns I/O memory.
The code incorrectly passes system memory to iosys_map_set_vaddr_iomem().
Restructure to handle each memory type separately. Use devm_ioremap*()
with ERR_PTR(-ENXIO) for WC/UC, and devm_memremap() with ERR_CAST() for
WT/WB.
Fixes: 32ae90c66fb6 ("drm/sysfb: Add efidrm for EFI displays") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20260311064652.2903449-1-nichen@iscas.ac.cn
Ravi Singh [Mon, 30 Mar 2026 06:14:14 +0000 (14:14 +0800)]
xfs: return default quota limits for IDs without a dquot
When an ID has no dquot on disk, Q_XGETQUOTA returns -ENOENT even
though default quota limits are configured and enforced against that
ID. This means unprivileged users who have never used any resources
cannot see the limits that apply to them.
When xfs_qm_dqget() returns -ENOENT for a non-zero ID, return a
zero-usage response with the default limits filled in from
m_quotainfo rather than propagating the error. This is consistent
with the enforcement behavior in xfs_qm_adjust_dqlimits(), which
pushes the same default limits into a dquot when it is first
allocated.
Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Ravi Singh <ravising@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Apple Backlight ACPI driver to a
platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Shawn Lin [Tue, 31 Mar 2026 07:54:50 +0000 (15:54 +0800)]
mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function
The function dw_mci_start_request() was just a thin wrapper around
__dw_mci_start_request(). Since it serves almost no functional purpose,
remove the wrapper to simplify the code flow.
Consequently, rename __dw_mci_start_request() to dw_mci_start_request()
so that the core implementation uses the primary name.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Tue, 31 Mar 2026 07:54:49 +0000 (15:54 +0800)]
mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request()
With the removal of queue support, the function dw_mci_queue_request()
is now just a wrapper with a confusing name that doesn't suggest
anything about queue. Removes the function and moves its body into
dw_mci_request().
No functional changes intended.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Mon, 30 Mar 2026 03:28:32 +0000 (11:28 +0800)]
mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery
Currently, the code uses the MQRQ_XFER_SINGLE_BLOCK flag to handle write
failures by retrying with single-block transfers. However, read failures
bypass this mechanism and instead use a dedicated legacy path mmc_blk_read_single()
that performs sector-by-sector retries.
Extend the MQRQ_XFER_SINGLE_BLOCK logic to cover multi-block read failures
as well. By doing so, we can remove the redundant and complex mmc_blk_read_single()
function, unifying the retry logic for both read and write operations under
a single, consistent, easier-to-maintain mechanism.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Mon, 30 Mar 2026 03:28:30 +0000 (11:28 +0800)]
mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS()
Convert to use DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() to drop the
CONFIG_PM_SLEEP to handle the conditional compilation when PM support is
disabled. This allows the compiler to automatically optimize away the
unused code paths when CONFIG_PM_SLEEP is not selected.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Shawn Lin [Sat, 28 Mar 2026 00:29:22 +0000 (08:29 +0800)]
mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions
The driver previously used an enum (dwcmshc_rk_type) to distinguish
platforms like the RK3568 and RK3588 based on DT compatible names.
This approach is inflexible, scales poorly for future revisions or
mixed-revision platforms, and conflates SoC names with controller
revisions. One example is RK3576 which lists "rockchip,rk3588-dwcmshc"
as a secondary compatible string just in order to claim it uses the
same controller revision as RK3588. This is confusing and makes it
error-prone to add new SoC support.
Introduces a new struct rockchip_pltfm_data containing a dedicated
revision field. The old enum is removed, and all code paths are
updated to use the revision-based data.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
====================
Correct BD length masks and BQL accounting for multi-BD TX packets
This patch series fixes two issues in the Xilinx AXI Ethernet driver:
1. Corrects the BD length masks to match the AXIDMA IP spec.
2. Fixes BQL accounting for multi-BD TX packets.
====================
Suraj Gupta [Fri, 27 Mar 2026 07:32:38 +0000 (13:02 +0530)]
net: xilinx: axienet: Fix BQL accounting for multi-BD TX packets
When a TX packet spans multiple buffer descriptors (scatter-gather),
axienet_free_tx_chain sums the per-BD actual length from descriptor
status into a caller-provided accumulator. That sum is reset on each
NAPI poll. If the BDs for a single packet complete across different
polls, the earlier bytes are lost and never credited to BQL. This
causes BQL to think bytes are permanently in-flight, eventually
stalling the TX queue.
The SKB pointer is stored only on the last BD of a packet. When that
BD completes, use skb->len for the byte count instead of summing
per-BD status lengths. This matches netdev_sent_queue(), which debits
skb->len, and naturally survives across polls because no partial
packet contributes to the accumulator.
Fixes: c900e49d58eb ("net: xilinx: axienet: Implement BQL") Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com> Reviewed-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20260327073238.134948-3-suraj.gupta2@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Suraj Gupta [Fri, 27 Mar 2026 07:32:37 +0000 (13:02 +0530)]
net: xilinx: axienet: Correct BD length masks to match AXIDMA IP spec
The XAXIDMA_BD_CTRL_LENGTH_MASK and XAXIDMA_BD_STS_ACTUAL_LEN_MASK
macros were defined as 0x007FFFFF (23 bits), but the AXI DMA IP
product guide (PG021) specifies the buffer length field as bits 25:0
(26 bits). Update both masks to match the IP documentation.
In practice this had no functional impact, since Ethernet frames are
far smaller than 2^23 bytes and the extra bits were always zero, but
the masks should still reflect the hardware specification.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com> Reviewed-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20260327073238.134948-2-suraj.gupta2@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NeilBrown [Thu, 26 Mar 2026 22:18:21 +0000 (09:18 +1100)]
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
The patch mentioned below changed cachefiles_bury_object() to expect 2
references to the 'rep' dentry. Three of the callers were changed to
use start_removing_dentry() which takes an extra reference so in those
cases the call gets the expected references.
However there is another call to cachefiles_bury_object() in
cachefiles_cull() which did not need to be changed to use
start_removing_dentry() and so was not properly considered.
It still passed the dentry with just one reference so the net result is
that a reference is lost.
To meet the expectations of cachefiles_bury_object(), cachefiles_cull()
must take an extra reference before the call. It will be dropped by
cachefiles_bury_object().
Reported-by: Marc Dionne <marc.dionne@auristor.com> Fixes: 7bb1eb45e43c ("VFS: introduce start_removing_dentry()") Signed-off-by: NeilBrown <neil@brown.name> Link: https://patch.msgid.link/177456350181.1851489.16359967086642190170@noble.neil.brown.name Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
projects / thirdparty / linux.git / log
