Zixun LI [Mon, 21 Oct 2024 15:04:51 +0000 (17:04 +0200)]
dm: gpio: Return error when pull up/down is requested but set_flags ops is not implmentated
Currently in _dm_gpio_set_flags() when set_flags ops is not implemented
direction_output()/_input() is used, but pull up/down is not supported by
these ops.
Caleb Connolly [Wed, 13 Nov 2024 04:59:24 +0000 (05:59 +0100)]
button: gpio: handle broken controller
Avoid crashing U-Boot when the GPIO controller for a button is disabled
or failed to probe. We also need to check the priv data for each button
since even if a button fails to probe it will still be polled by the
core code.
Introduce CONFIG_PHYTEC_K3_DDR_PATCH to make DDR timing patch code
optional for PHYTEC K3 boards. This allows better control over which
boards receive DDR timing patches, rather than compiling the code for
all boards with K3_DDRSS enabled.
Also enable the feature by default for PHYCORE_AM62X_R5.
Marek Vasut [Fri, 8 Nov 2024 18:52:26 +0000 (19:52 +0100)]
eeprom: at24: add ST M24256E Additional Write lockable page support
The ST M24256E behaves as a regular M24C256, except for the E variant
which uses up another I2C address for Additional Write lockable page.
This page is 64 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C256 area separately as that is on separate
I2C address from this page.
Unlike M24C32-D and M24C64-D, this part is specifically ST and does not
have any comparable M24* counterparts from other vendors, hence the st,
vendor prefix. Furthermore, the part name is M24256E without C between
the 24 and 256, this is not a typo. Finally, there is M24C256-D part,
which does contain 32 Bytes long Additional Write lockable page, which
is a different part and not supported by this patch.
With this pull request support for the EFI_HTTP_PROTOCOL and
EFI_IP4_CONFIG2 protocols are added. This allows EFI applications
to load files via HTTP.
UEFI:
add efi_dp_from_ipv4 function
add efi_net_set_addr, efi_net_get_addr functions
add support for HTTP device path
set EFI bootdevice device path to HTTP when loaded from wget
add support to send http requests and parse http headers
provide EFI_IP4_CONFIG2_PROTOCOL
provide EFI_HTTP_PROTOCOL
support IPv4() in device path to text protocol
provide unit tests for the HTTP and IPv4 Config2 protocols
Network:
zero terminate string with headers in wget_fill_info()
zero terminate string with headers in wget_lwip_fill_info()
pass port and server_name via wget_ctx in lwIP network stack
let wget_with_dns work with dns disabled
Others:
Add HTTP and IPV4 Config II protocols to UUID library functions.
Adriano Cordova [Wed, 4 Dec 2024 03:05:29 +0000 (00:05 -0300)]
efi_selftest: add test for IPv4 Config2 protocol
Add a test for the EFI_IP4_CONFIG2_PROTOCOL. The test sets the ip
policy to static, adds an ip address, and then reads the current
ip address and checks for it to be the same as the one that was set.
Adriano Cordova [Wed, 4 Dec 2024 03:05:26 +0000 (00:05 -0300)]
efi_loader: efi_net: add EFI_HTTP_PROTOCOL
Add an EFI HTTP driver. This commit implements the
EFI_HTTP_PROTOCOL and the EFI_HTTP_SERVICE_BINDING_PROTOCOL.
The latter is attached to the handle of th efi network
device. This is the same handle where snp, pxe, and ipconfig
are attached to.
Adriano Cordova [Wed, 4 Dec 2024 03:05:25 +0000 (00:05 -0300)]
efi_loader: efi_net: add EFI_IP4_CONFIG2_PROTOCOL
Add an implementation of the EFI_IP4_CONFIG2_PROTOCOL. The protocol
is attached to the handle of the efi network device. This is the same
handle where snp and pxe are attached to.
Adriano Cordova [Wed, 4 Dec 2024 03:05:24 +0000 (00:05 -0300)]
efi_loader: net: add support to send http requests and parse http headers
Add network-stack agnostic way to send an http request and
parse http headers from efi drivers. This uses wget as a
backend and communicates with it via efi_wget_info.
The function efi_net_do_request allocates a buffer on behalf of an
efi application using efi_alloc and passes it to wget to receive
the data. If the method is GET and the buffer is too small, it
re-allocates the buffer based on the last received Content-Length
header and tries again. If the method is HEAD it just issues one
request. So issuing a HEAD request (to update Content-Length) and
then a GET request is preferred but not required.
The function efi_net_parse_headers parses a raw buffer containing
an http header into an array of EFI specific 'http_header' structs.
Signed-off-by: Adriano Cordova <adrianox@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Adriano Cordova [Wed, 4 Dec 2024 03:05:23 +0000 (00:05 -0300)]
efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget
Set the device path of the efi boot device to an HTTP device path
(as formed by efi_dp_from_http) when the next boot stage is loaded
using wget (i.e., when wget is used with wget_info.set_bootdev=1).
When loaded from HTTP, the device path should account for it so that
the next boot stage is aware (e.g. grub only loads its http stack if
it itself was loaded from http, and it checks this from its device path).
Signed-off-by: Adriano Cordova <adrianox@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Adriano Cordova [Wed, 4 Dec 2024 03:05:22 +0000 (00:05 -0300)]
efi_loader: device_path: add support for HTTP device path
Add efi_dp_from_http to form a device path from HTTP. The
device path is the concatenation of the device path returned
by efi_dp_from_ipv4 together with an URI node and an END node.
Add the functions efi_net_set_addr and efi_net_get_addr to set
and get the ip address from efi code in a network agnostic way.
This could also go in net_common, or be compiled conditionally
for each network stack.
Signed-off-by: Adriano Cordova <adrianox@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Adriano Cordova [Wed, 4 Dec 2024 03:05:16 +0000 (00:05 -0300)]
net: wget: let wget_with_dns work with dns disabled
This was marked as TODO in the code:
- Enable use of wget_with_dns even if CMD_DNS is disabled if
the given uri has the ip address for the http server.
- Move the check for CMD_DNS inside wget_with_dns.
- Rename wget_with_dns to wget_do_request
Adriano Cordova [Tue, 26 Nov 2024 16:19:21 +0000 (13:19 -0300)]
net-lwip: zero terminate string with headers in wget_lwip_fill_info()
This patch comes as a companion to the same patch but for the legacy
net stack. Commit 1327c2a8d6 ("net/lwip: wget: integrate struct wget_info
into wget code") introduced function wget_fill_info() which retrieves
the headers from the HTTP server response. As we want to parse the
string in later patches we need to ensure that it is NUL terminated.
We must further check that wget_info->headers in not NULL.
Otherwise a crash occurs.
net: zero terminate string with headers in wget_fill_info()
Commit 2dd076a9c1b4 ("net: wget: integrate struct wget_info into legacy
wget code") introduced function wget_fill_info() which retrieves the
headers from the HTTP server response. As we want to parse the string in
later patches we need to ensure that it is NUL terminated.
We must further check that wget_info->headers in not NULL.
Otherwise a crash occurs.
Fixes: 2dd076a9c1b4 ("net: wget: integrate struct wget_info into legacy wget code") Signed-off-by: Adriano Cordova <adrianox@gmail.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Adriano Cordova [Tue, 3 Dec 2024 12:55:34 +0000 (09:55 -0300)]
lwip: wget: pass port and server_name via wget_ctx
Commit 5907c81 ("net: lwip: Enable https:// support for wget") was not
correctly rebased on top of the changes introduced by Commit 6cc4d04
("net/lwip: wget: put server_name and port into wget_ctx") in next.
This commit re-applies a couple of lines from 6cc4d04.
Fixes: Commit 5907c81 ("net: lwip: Enable https:// support for wget") Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Tom Rini [Mon, 2 Dec 2024 22:36:06 +0000 (16:36 -0600)]
Merge patch series "CI: Set up for an arm64 runner"
Tom Rini <trini@konsulko.com> says:
Hey all,
This is picking up Simon's v5 of the above-named series and making a few
more changes so that the follow-up series I have leads to arm64 being
supported for almost all jobs. To quote Simon's cover letter:
All gitlab runners are currently amd64 machines. This series attempts to
create a docker image which can also support arm64 so that sandbox tests
can be run on it.
The TARGET_... environment variables for grub could perhaps be adjusted,
using the new variables, but I have not done that for now.
Adding to what Simon said, we now build grub for all architectures as
the reason to install it was to be able to use the binaries in QEMU.
That won't provide us with amd64 binaries on arm64 hosts so we can't use
that shortcut anymore.
Simon Glass [Wed, 27 Nov 2024 17:17:27 +0000 (11:17 -0600)]
docker: Adjust installed packages slightly
We no longer need to install libc6-i386 so we can drop that. Switch to
installing linux-image-generic as that will be available on all hosts,
to provide the /boot/vmlinu* file that's requires for various tools.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 27 Nov 2024 17:17:24 +0000 (11:17 -0600)]
docker: Build grub for all architectures
For consistency now, and future ease of testing with non-amd64 hosts,
build grub for all architectures rather than relying on host binaries
for i386/x86_64.
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass [Wed, 27 Nov 2024 17:17:20 +0000 (11:17 -0600)]
test: Adjust print_ut test to use unsigned char
Since char is unsigned on arm64, this test currently fails. It seems
better to use unsigned anyway, since 0xff is written into the string at
the start. Update the terminator-assert to use a character instead of a
byte.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Changes in v6:
- Re-introduce
Evgeny Bachinin [Mon, 25 Nov 2024 09:15:07 +0000 (12:15 +0300)]
common: relocate fdt_blob in global_data for FDTSRC_EMBED case
Patch resolves two kind of bugs, one of which is vulnerability related
to KASLR.
=== Issue briefly ===
Working with FDT (via non-relocated gd::fdt_blob) from inside bootm
command may lead to the reading the garbage instead of FDT nodes. And
this can result in various side-effects depending on DTS nodes, being
parsed during bootm.
But below is my specific story how I faced with this issue due to
MESON_RNG probing failure.
=== Bugs description ===
1) Bug is revealed on:
* configuration below
* U-boot 2024.10 - f919c3a889f ("Prepare v2024.10")
It seems, the following patch is a trigger: ea955eea4f ("fdt: automatically add /chosen/kaslr-seed if DM_RNG is enabled")
Generally, CONFIG_OF_EMBED=y & CONFIG_RNG_MESON=y are the most
valuable ones for reproducing the issue.
```
CONFIG_ARCH_FIXUP_FDT_MEMORY=y
CONFIG_CMD_FDT=y
CONFIG_DEFAULT_FDT_FILE=""
CONFIG_FDT_64BIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_OF_LIBFDT_ASSUME_MASK=0x0
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_OF_LIBFDT=y
CONFIG_OF_LIST="meson-axg-our-device-name"
CONFIG_OF_REAL=y
CONFIG_OF_TRANSLATE=y
CONFIG_SUPPORT_OF_CONTROL=y
CONFIG_SYS_FDT_PAD=0x3000
CONFIG_TOOLS_OF_LIBFDT=y
CONFIG_DM_RNG=y
CONFIG_RNG_MESON=y
```
2) Due to CONFIG_OF_EMBED, the DTS is embedded into U-boot ELF and
accessible via __dtb_dt_begin symbol.
On early boot stage (board_f.c) the fdtdec_setup() is called only
once before U-boot's relocation into top of RAM. fdtdec_setup()
initializes gd::fdt_blob for FDTSRC_EMBED case:
```
gd->fdt_blob = dtb_dt_embedded();
gd->fdt_src = FDTSRC_EMBED;
```
3) Then reloc_fdt() is called in board_f.c
But due to CONFIG_OF_EMBED=y the reloc_fdt() does not update
gd::fdt_blob value (strictly speaking, it is impossible for
CONFIG_OF_EMBED=y, because U-boot ELF has not been relocated yet
at this moment).
As a result after relocation we get fdt_blob, pointing to DTS address
before relocation:
```
# bdinfo
<...>
relocaddr = 0x000000000fedf000
reloc off = 0x000000000eedf000
<...>
fdt_blob = 0x010ce6c0 << points to __dtb_dt_begin before relocation
new_fdt = 0x0000000000000000 << empty erroneously
fdt_size = 0x0000000000000000 << zero erroneously
```
4) During bootm command (according to our ITS-config file) the Linux
is loaded into 0x01080000 (which is very close to fdt_blob addr
0x010ce6c0).
```
## Loading kernel from FIT Image at 04000000 ...
Trying 'kernel' kernel subimage
<...>
Load Address: 0x01080000
```
So Linux image overwrites the gd::fdt_blob memory location
in RAM (0x010ce6c0).
5) Issue:
Hence any manipulation with DTS (say, via FDT API) inside
implementation of bootm command leads to accessing the fdt_blob area
with garbage, that can lead to two situations:
Almost the same as in (5.1), but 2 situations happen (depending on
the value of garbage):
* call to fdt_offset_ptr_() :: fdt_off_dt_struct(fdt)
returns not so big garbage, leading to tagp, being inside RAM.
* or calculations of absoffset inside fdt_offset_ptr() leads to
failure of the one of if() conditions with NULL as retval.
Result is fdt_next_tag() interprets the tagp as FDT_END. And we are
returning from our callstack via functions' error paths, leading to
"No RNG device" and "KASLR disabled due to lack of seed":
```
fdt_kaslrseed()
uclass_get_device()
<...>
device_probe()
device_of_to_plat()
meson_rng_of_to_plat()
clk_get_by_name()
clk_get_by_name_nodev()
<...>
fdt_stringlist_search()
fdt_getprop()
fdt_get_property_namelen_()
fdt_first_property_offset()
fdt_check_node_offset_()
fdt_next_tag():
```
tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
```
fdt_next_tag() tagp:0000000001890677
fdt_next_tag() ram_top:0x10000000 (tagp is inside RAM)
uclass_get_device_tail():486 device_probe() ret:-22
No RNG device
Starting kernel ...
[ 0.000000] Linux version 6.9.12
[ 0.000000] KASLR disabled due to lack of seed
```
Mark Kettenis [Tue, 26 Nov 2024 19:12:14 +0000 (20:12 +0100)]
Makefile: avoid non-standard sed expressions
The '?' that is used in the sed expression that determines MK_ARCH
is part of the extended regular expression syntax, but the default
behaviour of sed as specified by POSIX is to use only basic regular
expression syntax. Use the equivalent '\{0,1\}' instead as
suggested by the OpenBSD re_format(7) man page.
Fixes: 04b1d84221d5 ("Makefile: fix empty MK_ARCH when using ccache") Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Marek Vasut <marex@denx.de> Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Jerome Forissier [Tue, 26 Nov 2024 14:45:06 +0000 (15:45 +0100)]
net: lwip: wget: fix legacy syntax
Commit 356011f7ac25 ("lwip: fix code style issues") has inadvertently
broken the support for the legacy syntax:
=> wget 192.168.0.16:test.bin
invalid uri, no file path
Invalid URL. Use http(s)://
The reason is two calls to strncpy() were replaced by strlcpy() without
paying attention to the fact that they are not equivalent in the present
case. Since we are using a character counter (n) and since we do not
depend on having a properly null-terminated string at each step in the
parsing, strlcpy() is not justified and strncpy() is the right tool for
the job. So use it again.
Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Ilias Apalodimas [Fri, 29 Nov 2024 17:08:13 +0000 (19:08 +0200)]
Revert "efi_memory: do not add U-Boot memory to the memory map"
This reverts commit ("commit a68c9ac5d8af ("efi_memory: do not add
U-Boot memory to the memory map").
This code was removed when the EFI subsystem started using LMB calls for
the reservations. In hindsight it unearthed two problems.
The e820 code is adding u-boot memory as EfiReservedMemory while it
should look at what LMB added and decide instead of blindly overwriting
it. The reason this worked is that we marked that code properly late,
when the EFI came up. But now with the LMB changes, the EFI map gets
added first and the e820 code overwrites it.
The second problem is that we never mark SetVirtualAddressMap as runtime
code, which we should according to the spec. Until we fix this the
current hack can't go away, at least for architectures that *need* to
call SVAM.
More specifically x86 currently requires SVAM and sets the NX bit for
pages not marked as *_CODE. So unless we do that late, it will crash
trying to execute from non-executable memory. It's also worth noting
that x86 calls SVAM late in the boot, so this will work until someone
decides to overwrite/use BootServicesCode from the OS.
Notably arm64 disables it explicitly if the VA space is > 48bits, so
doesn't suffer from any of these problems.
This doesn't really deserve a fixes tag, since it brings back a hack to
remedy a situation that was wrong long before that commit, but in case
anyone hits the same bug ...
Simon sent the original revert in the link, but we need a proper
justification for it.
- Make DRAM coding GPIOs available before relocation on Data Modul
i.MX8M Mini/Plus eDM SBC because the DRAM configuration GPIO straps
must be accessible in SPL and before relocation because the GPIOs are
sampled both in U-Boot SPL as well as early on in U-Boot proper.
- Pick safe DRAM size on failure on Data Modul i.MX8M Mini/Plus eDM SBC
instead of failing with hang() or panic().
- Replace YModem with SDP on Data Modul i.MX8M Mini eDM SBC SPL since
SDP is much more flexible.
- Deduplicate Data Modul i.MX8M eDM SBC defconfigs.
- Perform plain boot in altbootcmd on Data Modul i.MX8M Mini/Plus eDM
SBC.
When a timeout occurs while executing a command a 'Boot fail' message is
written and testing is stopped. The user is left in the dark about the
failure cause.
! _pytest.outcomes.Exit: Boot fail: Marking connection bad - no other tests will run !
Add the executed command to the message.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
test: add command to 'Lab failure' timeout message
When a timeout occurs while executing a command a 'Lab failure' message is
written and testing is stopped. The user is left in the dark about the
failure cause.
! _pytest.outcomes.Exit: Lab failure: Marking connection bad - no other tests will run !
Add the word 'Timeout' and the executed command to the message.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Caleb Connolly [Fri, 15 Nov 2024 00:47:29 +0000 (01:47 +0100)]
cmd: add a fetch utility
Add a small utility for displaying some information about U-Boot and the
hardware it's running on in a similar fashion to the popular neofetch
tool for Linux [1].
While the output is meant to be useful, it should also be pleasing to
look at and perhaps entertaining. The ufetch command aims to bring this
to U-Boot, featuring a colorful ASCII art version of the U-Boot logo.
[1]: https://en.wikipedia.org/wiki/Neofetch
Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3 Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8560-QRD Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
There is no need to mount the filesystem on the host side.
All filesystem tools offer some way to fill the fs without mounting.
So, create the content on the host side, create and fill the fs
without mounting.
No more sudo or guestmount needed.
This new approach works because the tests don't care about user IDs
and no device files are needed.
If user IDs start to matter it's still possible to use wrapper
tools like fakeroot in future while filling the fs.
Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Jerome Forissier [Fri, 15 Nov 2024 16:45:14 +0000 (17:45 +0100)]
test/cmd/wget.c: move net_test_wget() to the cmd test suite
Since net_test_wget() is testing a command and is in test/cmd it should
be in the 'cmd' test suite, not 'lib'.
Saving and restoring the values of the environment variables that the
test manipulates is necessary to avoid a regression when running the
whole ut test suite. A minimal reproducer is:
arm64: zynqmp: Update the usb5744 hub node as per binding
Updating the usb5744 hub node as per the latest upstream DT binding
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
tree/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml?h=v6.8.8
Love Kumar [Fri, 15 Nov 2024 12:02:02 +0000 (17:32 +0530)]
test/py: zynqmp_rpu: Fix tcminit mode value
Update the tcminit value to string and number both as per commit 342ccba5586a ("arm64: zynqmp: Fix tcminit mode value based on argv") and
also adds negative cases based on invalid command sequences.
cadence_qspi: Refactor the flash reset functionality
As the flash reset is handled in spi nor core, removing the
flash reset functionality. As the configuration like tristate
and hysterisis need to be enabled by the cdo. Handle the flash
reset only for mini u-boot case.
Rename the "cadence_qspi_versal_flash_reset" to generic name
"cadence_qspi_flash_reset" as this can be used by other platforms
as well.
Marek Vasut [Fri, 29 Nov 2024 00:35:43 +0000 (01:35 +0100)]
ARM: dts: imx: Enable PCIe and NVMe on Data Modul i.MX8M Mini eDM SBC
Enable PCIe/NVMe support on Data Modul i.MX8M Mini eDM SBC. Except for
the configuration options which are enabled, add slight adjustment
to board u-boot.dtsi, which is necessary as there is currently no
driver for the I2C PCIe clock generator. Since the generator is
strapped to be always on, it is possible to supplant the generator
functionality by fixed-clock.
Marek Vasut [Fri, 29 Nov 2024 02:41:47 +0000 (03:41 +0100)]
ARM: imx: Replace YModem with SDP on Data Modul i.MX8M Mini eDM SBC SPL
The YModem support in SPL was never really used on this device,
the SDP support is much more convenient on i.MX8M Mini based
hardware. Replace the YModem support with SDP support.
The SDP can be utilized by forcing the board into SDP boot mode
by grounding test point right next to silkscreen label U30, and
then by using mfgtools 'uuu -brun spl flash.bin' once the device
enumerates on host system USB bus. The SDP capable USB port is
available on the USB micro-B port on the base board.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Marek Vasut [Fri, 29 Nov 2024 00:13:56 +0000 (01:13 +0100)]
ARM: imx: Deduplicate Data Modul i.MX8M eDM SBC defconfigs
Deduplicate defconfigs for all Data Modul i.MX8M eDM SBC systems by factoring
out the common parts into generic imx8m_data_modul.config and including
those using the #include <configs/...> preprocessor macro in the current
set of board specific defconfigs. The preprocessor macro is applicable
to defconfigs as well.
This introduces no functional change, the resulting .config is almost
identical for all Data Modul i.MX8M eDM SBC systems, except for slight
alignment in DEBUG_UART and SYS_PBSIZE.
Marek Vasut [Fri, 29 Nov 2024 00:13:55 +0000 (01:13 +0100)]
ARM: imx: Perform plain boot in altbootcmd on Data Modul i.MX8M Mini/Plus eDM SBC
The current A/B switching preparatory altbootcmd is confusing
to users, replace it with plain 'run bootcmd' which can be
replaced by proper A/B switching altbootcmd when the matching
updater is added on top of the platform. By default, keep the
boot counter incrementing, but do not do any A/B partition
switching.
Marek Vasut [Fri, 29 Nov 2024 00:13:54 +0000 (01:13 +0100)]
ARM: dts: imx: Pick safe DRAM size on failure on Data Modul i.MX8M Mini/Plus eDM SBC
In case gpio_request_list_by_name_nodev() in board dmo_get_memcfg()
returns error code, pick a safe default DRAM configuration instead
of bailing out with some sort of hang() or panic(). The BIT(2)|BIT(0)
strap option is the lowest known option of 2 GiB , use that.
Marek Vasut [Fri, 29 Nov 2024 00:13:53 +0000 (01:13 +0100)]
ARM: dts: imx: Make DRAM coding GPIOs available before relocation on Data Modul i.MX8M Mini/Plus eDM SBC
The DRAM configuration GPIO straps must be accessible in SPL and before
relocation because the GPIOs are sampled both in U-Boot SPL as well as early
on in U-Boot proper. The already present bootph-pre-ram DT property made the
GPIO controllers available in SPL, but not early on in U-Boot proper, which
made gpio_request_list_by_name_nodev() in board dmo_get_memcfg() fail. Add
missing bootph-some-ram DT property to all GPIO controllers which are
referenced in dmo,ram-coding-gpios DT property to make those GPIO
controllers available early in U-Boot proper as well.
Fixes: 8c103c33fb14 ("dm: dts: Convert driver model tags to use new schema") Signed-off-by: Marek Vasut <marex@denx.de>
Always probing pmecc in the generic nand controller probe function and
bailing out if pmecc is missing, prevents the driver to be usable for
SoCs which do not have a pmecc hardware ecc engine like older sam9 SoCs,
for example at91sam9g20. Tested on sam9x60 that the call, which the
comment was moved to, is sufficient to probe the pmecc.
A NULL pointer argument to %s causes a NULL pointer dereference in the
fixed width numerical printout code, since p is overwritten with NULL.
In case of %s width is 0. Check width before dereferencing the pointer.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Reviewed-by: John Ogness <john.ogness@linutronix.de>
Yuri Zaporozhets [Tue, 19 Nov 2024 20:59:59 +0000 (21:59 +0100)]
configs: enable CONFIG_PCI_REGION_MULTI_ENTRY=y in sifive_unmatched_defconfig
Currently, the PCI subsystem selects the small "region 2" (which starts at 0x7000000)
as bus_addr/phys_addr. As a consequence, the BAR0 on PCIe video card cannot be initialized,
because it simply doesn't fit into 0x1000000 bytes size of "region 2".
U-Boot should use "region 1" instead (the one which starts at 0x60090000), because
it has much bigger size (0xFF70000), and easily accomodates BAR0 of the video card.
Linux kernel also uses 0x60090000 as bus_start/phys_start.
Signed-off-by: Yuri Zaporozhets <yuriz@vodafonemail.de> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
To restore MMC boot, enable SPL_SYS_MMCSD_RAW_MODE and recover
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION and
SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION.
Fixes: 2a00d73d081 ("spl: mmc: Try to clean up raw-mode options") Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
With the move from script based booting to using bootmeth a lot of
environment variables have changed. To always use the default environment
it is recommendable to erase the environment stored in the SPI flash.
This can be done with the 'env erase' sub-command.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Yuri Zaporozhets [Mon, 11 Nov 2024 19:24:04 +0000 (20:24 +0100)]
spl: increase SPL_SYS_MALLOC_SIZE when using BIOSEMU on RISC-V
If BIOSEMU is compiled for RISC-V (SiFive Unmatched board) and the function
dm_pci_run_vga_bios() is executed, U-Boot stops with error message saying
that the SPL malloc pool is too small. So increase the default pool size
when both BIOSEMU and RISCV parameters are set.
Signed-off-by: Yuri Zaporozhets <yuriz@qrv-systems.net> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Michal Simek [Wed, 20 Nov 2024 08:05:27 +0000 (09:05 +0100)]
arm64: zynqmp: Also generate images with single DT
Create u-boot-single.itb where only actual DTB is used not really multiple
of DTS from OF_LIST. This results in small files without option to change
DT.
Michal Simek [Fri, 1 Nov 2024 09:17:54 +0000 (10:17 +0100)]
binman: Add option for pointing to separate description
Adding binman node with target images description can be unwanted feature
but as of today there is no way to disable it.
Also on size constrained systems it is not useful to add binman description
to DTB.
Introduce BINMAN_DTB Kconfig symbol which allows separate DTB for target
from DTB for binman itself.
Michal Simek [Fri, 1 Nov 2024 09:17:56 +0000 (10:17 +0100)]
arm64: zynqmp: Describe empty binman node
For enabling binman by default there is a need to have at least empty node
present that's why create -u-boot.dtsi with empty node to cover all ZynqMP
platforms.
projects / thirdparty / u-boot.git / log
