From 2eaf7775fc05d65c9254530ea0fdbbcf910c92cd Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 9 Jun 2023 16:08:41 +0200 Subject: [PATCH] hw/ide/ahci: PxSACT and PxCI is cleared when PxCMD.ST is cleared MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit According to AHCI 1.3.1 definition of PxSACT: This field is cleared when PxCMD.ST is written from a '1' to a '0' by software. This field is not cleared by a COMRESET or a software reset. According to AHCI 1.3.1 definition of PxCI: This field is also cleared when PxCMD.ST is written from a '1' to a '0' by software. Clearing PxCMD.ST is part of the error recovery procedure, see AHCI 1.3.1, section "6.2 Error Recovery". If we don't clear PxCI on error recovery, the previous command will incorrectly still be marked as pending after error recovery. Signed-off-by: Niklas Cassel Reviewed-by: Philippe Mathieu-Daudé Message-id: 20230609140844.202795-6-nks@flawful.org Signed-off-by: John Snow (cherry picked from commit d73b84d0b664e60fffb66f46e84d0db4a8e1c713) Signed-off-by: Michael Tokarev --- hw/ide/ahci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c index 6299320ffbd..a93a1878dec 100644 --- a/hw/ide/ahci.c +++ b/hw/ide/ahci.c @@ -329,6 +329,11 @@ static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val) ahci_check_irq(s); break; case AHCI_PORT_REG_CMD: + if ((pr->cmd & PORT_CMD_START) && !(val & PORT_CMD_START)) { + pr->scr_act = 0; + pr->cmd_issue = 0; + } + /* Block any Read-only fields from being set; * including LIST_ON and FIS_ON. * The spec requires to set ICC bits to zero after the ICC change -- 2.39.5