From 53b6445ad08f07b6f4a84f1434f543196009ed89 Mon Sep 17 00:00:00 2001 From: Jakob Unterwurzacher Date: Fri, 27 Jun 2025 15:17:12 +0200 Subject: [PATCH] arm64: dts: rockchip: use cs-gpios for spi1 on ringneck MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Hardware CS has a very slow rise time of about 6us, causing transmission errors when CS does not reach high between transaction. It looks like it's not driven actively when transitioning from low to high but switched to input, so only the CPU pull-up pulls it high, slowly. Transitions from high to low are fast. On the oscilloscope, CS looks like an irregular sawtooth pattern like this: _____ ^ / | ^ /| / | /| / | / | / | / | / | ___/ |___/ |_____/ |___ With cs-gpios we have a CS rise time of about 20ns, as it should be, and CS looks rectangular. This fixes the data errors when running a flashcp loop against a m25p40 spi flash. With the Rockchip 6.1 kernel we see the same slow rise time, but for some reason CS is always high for long enough to reach a solid high. The RK3399 and RK3588 SoCs use the same SPI driver, so we also checked our "Puma" (RK3399) and "Tiger" (RK3588) boards. They do not have this problem. Hardware CS rise time is good. Fixes: c484cf93f61b ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard") Cc: stable@vger.kernel.org Reviewed-by: Quentin Schulz Signed-off-by: Jakob Unterwurzacher Link: https://lore.kernel.org/r/20250627131715.1074308-1-jakob.unterwurzacher@cherry.de Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/px30-ringneck.dtsi | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi index ab232e5c7ad61..4203b335a2633 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi @@ -379,6 +379,18 @@ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + spi1 { + spi1_csn0_gpio_pin: spi1-csn0-gpio-pin { + rockchip,pins = + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + + spi1_csn1_gpio_pin: spi1-csn1-gpio-pin { + rockchip,pins = + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; }; &pmu_io_domains { @@ -396,6 +408,17 @@ vqmmc-supply = <&vccio_sd>; }; +&spi1 { + /* + * Hardware CS has a very slow rise time of about 6us, + * causing transmission errors. + * With cs-gpios we have a rise time of about 20ns. + */ + cs-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>, <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_csn0_gpio_pin &spi1_csn1_gpio_pin &spi1_miso &spi1_mosi>; +}; + &tsadc { status = "okay"; }; -- 2.47.2