From 58abc69e479cf5b36c4fc4287a11c9d92d2ce4b8 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 16 Jan 2025 10:00:30 +0100 Subject: [PATCH] ARM: dts: ti: davinci: Align GPIO hog name with bindings Bindings expect GPIO hog names to end with 'hog' suffix, so correct it to fix dtbs_check warnings like: da850-lego-ev3.dtb: batt_volt_en: $nodename:0: 'batt_volt_en' does not match '^.+-hog(-[0-9]+)?$' Signed-off-by: Krzysztof Kozlowski Acked-by: David Lechner Link: https://lore.kernel.org/r/20250116090030.87452-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bartosz Golaszewski --- arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts index 4df10379ff221..173401c58d534 100644 --- a/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts +++ b/arch/arm/boot/dts/ti/davinci/da850-lego-ev3.dts @@ -412,14 +412,14 @@ status = "okay"; /* Don't pull down battery voltage adc io channel */ - batt_volt_en { + batt-volt-en-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; }; /* Don't impede Bluetooth clock signal */ - bt_clock_en { + bt-clock-en-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input; @@ -433,19 +433,19 @@ * anything, but they are present in the source code from LEGO. */ - bt_pic_en { + bt-pic-en-hog { gpio-hog; gpios = <51 GPIO_ACTIVE_HIGH>; output-low; }; - bt_pic_rst { + bt-pic-rst-hog { gpio-hog; gpios = <78 GPIO_ACTIVE_HIGH>; output-high; }; - bt_pic_cts { + bt-pic-cts-hog { gpio-hog; gpios = <87 GPIO_ACTIVE_HIGH>; input; -- 2.47.2