From 853bd2ec1196945fa96221497907b3046ad28d4d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 13 Aug 2025 00:45:43 +0300 Subject: [PATCH] media: i2c: ov2740: Use V4L2 sensor clock helper Several camera sensor drivers access the "clock-frequency" property directly to retrieve the external clock rate, or modify the clock rate of the external clock programmatically. Both behaviours are valid on a subset of ACPI platforms, but are considered deprecated on OF platforms, and do not support ACPI platforms that implement MIPI DisCo for Imaging. Implementing them manually in drivers is deprecated, as that can encourage cargo-cult and lead to differences in behaviour between drivers. Instead, drivers should use the devm_v4l2_sensor_clk_get() helper. This driver supports ACPI platforms only. It retrieves the clock if present, and retrieves the clock rate from the "clock-frequency" property. If the rate does not match the expected rate, the driver fails probing. This is correct behaviour for ACPI. Switch to using the devm_v4l2_sensor_clk_get() helper. This does not change the behaviour on ACPI platforms that specify a clock-frequency property and don't provide a clock. On ACPI platforms that provide a clock, the clock rate will be set to the value of the clock-frequency property. This should not change the behaviour either as this driver expects the clock to be set to that rate, and wouldn't operate correctly otherwise. Signed-off-by: Laurent Pinchart Signed-off-by: Sakari Ailus Reviewed-by: Mehdi Djait Signed-off-by: Hans Verkuil --- drivers/media/i2c/ov2740.c | 24 ++++++++---------------- 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c index aedf62df6e93a..fb590dfadda13 100644 --- a/drivers/media/i2c/ov2740.c +++ b/drivers/media/i2c/ov2740.c @@ -1133,7 +1133,6 @@ static int ov2740_check_hwcfg(struct ov2740 *ov2740) struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = V4L2_MBUS_CSI2_DPHY }; - u32 mclk; int ret; unsigned int i, j; @@ -1146,20 +1145,6 @@ static int ov2740_check_hwcfg(struct ov2740 *ov2740) return dev_err_probe(dev, -EPROBE_DEFER, "waiting for fwnode graph endpoint\n"); - ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk); - if (ret) { - fwnode_handle_put(ep); - return dev_err_probe(dev, ret, - "reading clock-frequency property\n"); - } - - if (mclk != OV2740_MCLK) { - fwnode_handle_put(ep); - return dev_err_probe(dev, -EINVAL, - "external clock %d is not supported\n", - mclk); - } - ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg); fwnode_handle_put(ep); if (ret) @@ -1342,6 +1327,7 @@ static int ov2740_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct ov2740 *ov2740; + unsigned long freq; bool full_power; unsigned int i; int ret; @@ -1379,11 +1365,17 @@ static int ov2740_probe(struct i2c_client *client) msleep(20); } - ov2740->clk = devm_clk_get_optional(dev, "clk"); + ov2740->clk = devm_v4l2_sensor_clk_get(dev, "clk"); if (IS_ERR(ov2740->clk)) return dev_err_probe(dev, PTR_ERR(ov2740->clk), "failed to get clock\n"); + freq = clk_get_rate(ov2740->clk); + if (freq != OV2740_MCLK) + return dev_err_probe(dev, -EINVAL, + "external clock %lu is not supported\n", + freq); + for (i = 0; i < ARRAY_SIZE(ov2740_supply_name); i++) ov2740->supplies[i].supply = ov2740_supply_name[i]; -- 2.47.3